Sony KV-21CL10K Instrukcja obsługi

4-093-929-51(2)

R

Instruction Manual

Инструкции за експлоатация

Návod k obsluze

Kezelési útmutató

Instrukcja obsługi

Инструкция по эксплуатации

GB

BG

CZ

HU

PL

RU

SK

Návod na obsluhu

FD Trinitron

Colour Television

KV-21CL10K

KV-21FQ10K

01CoverKV21FQ10K.fm Page 2 Thursday, July 10, 2003 4:44 PM

GB

master page=right

3

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Introduction

Thank you for choosing this Sony FD Trinitron Colour Television.

Before operating the TV, please read this manual thoroughly and retain it for future

reference.

Symbols used in the manual:

• Important information

• Information on a feature.

• 1,2...Sequence of instructions.

• Shaded buttons on the remote control

show you the buttons you have to

press to follow the sequence of the

instructions.

• Informs you of the result of

instructions.

Table of Contents

Introduction............................................................................................................................................. 3

Safety Information .... ..............................................................................................................................4

Overview

Overview of Remote Control Buttons .... .............................................................................................5

Overview of TV Buttons ........................................................................................................................ 6

Installation

Inserting Batteries into the Remote Control ....................................................................................... 6

Connecting an Aerial and VCR ............................................................................................................ 6

First Time Operation

Switching On the TV and Automatically Tuning .............................................................................. 7

Menu System

Introducing and Using the Menu System ...........................................................................................9

Picture................................................................................................................................................. 9

Sound................................................................................................................................................ 11

Timer................................................................................................................................................. 12

Channel Set Up ............................................................................................................................... 13

Set Up ............................................................................................................................................... 15

Teletext................................................................................................................................................ 16

Additional Information

Connecting Optional Equipment ....................................................................................................... 17

Using Optional Equipment ................................................................................................................. 17

Specifications......................................................................................................................................... 18

Troubleshooting .................................................................................................................................... 19

Table of Contents

01GBKV21FQ10K.fm Page 3 Thursday, July 10, 2003 4:52 PM

master page=left

4

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Safety Information

This set is to operate on a 220-

240V AC supply only. Take care

not to connect too many

appliances to the same power

socket as this could result in fire

or electric shock.

For environmental and safety

reasons, it is recommended that

the TV set is not left in standby

mode when not in use.

Disconnect from the mains.

Never push objects of any kind

into the set as this could result in

a fire or electric shock. Never

spill liquid of any kind on the

set. If any liquid or solid object

does fall through, do not operate

the TV. Have it checked immedi-

ately by qualified personnel.

Do not open the cabinet and the

rear cover of the TV. Refer to

qualified service personnel only.

For your own safety, do not

touch any part of the TV, power

lead or aerial lead during

lightning storms.

To prevent fire or shock hazard,

do not expose the TV to rain or

moisture.

Do not cover the ventilation

openings of the TV. For

ventilation, leave a space of at

least 10cm all around the set.

Never place the TV in hot, humid

or excessively dusty places. Do

not install the TV where it may be

exposed to mechanical

vibrations.

To prevent fire, keep

inflammable objects or naked

lights (e.g. candles) away from

the TV.

Clean the screen and cabinet with a

soft, lightly dampened cloth. Do

not use any type of abrasive pad,

alkaline cleaner, scouring powder

or solvent, such as alcohol or

benzine, or antistatic spray. As a

safety precaution, unplug the TV

before cleaning it.

Pull out the power lead by the

plug. Do not pull on the power

lead itself.

Take care not to place heavy

objects on the power lead as this

could result in damage.

We recommend you wind any

excess lead around the holders

provided on the rear of the TV.

Place the TV on a secure stable

stand. Do not allow children to

climb on to it. Do not place the

TV on its side or face up.

Unplug the power lead before

moving the TV. Avoid uneven

surfaces, quick steps or excessive

force. If the set has been dropped

or damaged, have it checked

immediately by qualified service

personnel.

Do not cover the ventilation

openings of the TV with items

such as curtains or newspapers,

etc.

Safety Information

01GBKV21FQ10K.fm Page 4 Thursday, July 10, 2003 4:52 PM

GB

master page=right

5

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Overview of Remote Control Buttons

Besides TV functions, all coloured buttons as well as green symbols are also used for

Teletext operation. For more details, please refer to “Teletext” section of this instruction

manual (see page 16).

TV

1

2

3

4

6

7

8

9

0

5

MENU

PROG

A/B

Displaying on screen

information

Press to display all on-screen

indications. Press again to

cancel.

Muting the sound

Press to mute TV sound.

Press again to restore the

sound.

Selecting input source

Press repeatedly until the

desired input symbol of the

source appears on the TV

screen.

Selecting stereo broadcast

or sound channel

In case of a bilingual

broadcast, press this button

repeatedly to select sound

channel 1 or sound channel 2.

Selecting channels

Press to select channels.

For double-digit programme

numbers, enter the second

digit within 3 seconds.

or

Press -/-- and then the first

and second digit.

If you enter an incorrect first

digit, this should be corrected

by entering another digit (0-9)

and then selecting -/-- button

again to enter the programme

number of your choice.

On timer

Set TV to switch on

automatically.

Sleep timer

Set TV to switch off

automatically.

Selecting sound effect

(only for KV-21FQ10K)

Press repeatedly to change

the sound effect mode.

Adjusting TV volume

Press to adjust the volume

of the TV.

Selecting sound mode

Press repeatedly to change

the sound mode

.

To temporarily switch off TV

Press to temporarily switch off TV (the standby

indicator 1 on TV lights up). Press again to switch on

TV from standby mode.

To save energy we recommend

switching off completely

when TV is not in use.

After 15 minutes

without a signal and

without any button

being pressed, the TV

switches automatically

into standby mode.

Selecting TV mode

Press to switch off teletext or

video input.

Back to the channel last

watched

Press to watch the last

channel selected (watched for

at least 5 seconds).

Selecting channels

Press to select the next or

previous channel.

Displaying the menu

system

Press to display the menu on

the TV screen. Press again to

remove the menu display

from the TV screen.

Menu selection

Scroll Up

Scroll Down

Previous menu or selection

Next menu or selection

Confirm your selection

Selecting Teletext

Press to switch on teletext.

Selecting screen format

Press to view programmes in

16:9 mode. Press again to

return to 4:3 mode.

Selecting picture mode

Press repeatedly to change

the picture mode.

Overview

01GBKV21FQ10K.fm Page 5 Thursday, July 10, 2003 4:52 PM

master page=left

6

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Overview of TV Buttons

Inserting Batteries into the Remote Control

Make sure you insert the supplied batteries using the correct polarities.

Always remember to dispose of used batteries in an environmental friendly way.

Connecting an Aerial and VCR

Connecting cables are not supplied.

Displaying

the menu

system

Selecting

Input

source

Volume

control

buttons

Programme Up or

Down buttons

(selects TV

channels)

Lift up the door

flap with

mark to reveal the

control panel.

Standby

indicator

On/Off

switch

Video Input

jack

Audio Input

jacks

Headphone

jack

OUT IN

or

VCR

Scart lead is optional.

For more details of VCR connection,

please refer to the section “Connecting

Optional Equipment” of this

instruction manual (see page 17).

Overview-Installation

01GBKV21FQ10K.fm Page 6 Thursday, July 10, 2003 4:52 PM

GB

master page=right

7

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Switching On the TV and Automatically Tuning

The first time you switch on your TV, a sequence of menu screens appear on the TV

enabling you to: 1) choose the language of the menu screen, 2) choose the country in which

you wish to operate the TV, 3) search and store all available channels (TV Broadcast), 4)

change the order in which the channels (TV Broadcast) appear on the screen and 5) adjust

the picture slant.

However, if you need to change any of these settings at a later date, you can do that by

selecting the appropriate option in the (Set Up) or (Channel Set Up) menu.

1 Connect the TV plug to the mains socket (220-240 V AC, 50 Hz).

Press ! On/Off button on the TV set to switch on the TV. The

first time you switch on the TV, a Language menu displays

automatically on the TV screen.

2 Press 2 +/– button on the top control panel to select the language,

then press t to confirm your selection. From now on all menus

will appear in the selected language.

3 The Country menu appears automatically on the TV screen. Press

2 +/– button to select the country in which you will operate the

TV set, then press t to confirm your selection.

• If the country in which you want to use the TV set does not

appear in the list, select “-” instead of a country.

• In order to avoid wrong teletext characters for Cyrillic

languages we recommend to select Russia in the case that

your own country does not appear in the list.

4 Ensure the aerial is connected as instructed, then press t to

confirm. The TV automatically starts searching and storing all

available broadcast channels for you.

•This procedure could take some minutes. Please be patient

and do not press any buttons, otherwise automatic tuning

will not be completed.

•If no channels were found during the auto tuning process, a

new menu appears automatically on the screen asking you

to connect the aerial. Please connect the aerial (see page 6)

and press t. The auto tuning process will start again.

Language

Svenska

English

Nederlands

Français

Select language

Norsk

Confirm

[

t

]

Select

[

–

2+

]

Country

Schweiz/Suisse/Svizzera

Italia

Select Country

Norge

Sverige

–

Confirm

[

t

]

Select

[

–

2+

]

Do you want to start automatic

First please connect aerial

tuning?

No

Initial Set Up

Yes

Confirm

[

t

]

Select

[

–

2+

]

End

Auto Tuning

No channel found

Please connect aerial

OK

Confirm

[

t

]

End

First Time Operation

continued...

01GBKV21FQ10K.fm Page 7 Thursday, July 10, 2003 4:52 PM

master page=left

8

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

5 After all available channels are captured and stored, the

Programme Sorting menu appears automatically on the screen

enabling you to change the order in which the channels appear on

the screen.

a) If you wish to keep the broadcast channels in the tuned order,

press MENU.

b) If you wish to store the channels in a different order:

1 Press 2 +/– to select the programme number with the

channel (TV Broadcast) you wish to rearrange, then press

t.

2 Press 2 +/– to select the new programme number position

for your selected channel (TV Broadcast), then press t.

3 Repeat steps b) 1 and b) 2 if you wish to change the order of

the other channels.

6 Because of the earth’s magnetism, the picture might slant. The

Picture Rotation menu allows you to correct the picture slants if it

is necessary.

a) If it is not necessary, press t.

b) If it is necessary, press 2 +/– to correct any slant of the

picture. Finally press t to store.

•To allow this menu to appear again, press and hold MENU button at top control panel for

about 5 seconds.

• The MENU, and / / / buttons on the remote control can also be used for the

operations above.

Your TV is now ready for use.

Programme Sorting

Programme:

Select channel

Confirm

[

t

]

Select

[

–

2+

]

Exit

TVE

TVE2

TV3

04 C33

01

02

03

Programme Sorting

Programme:

Select new position

Confirm

[

t

]

Select

[

–

2+

]

Exit

01 TVE

02 TVE2

03 TV3

04 C33 03 TV3

Picture Rotation

Confirm

[

t

]

End

Select

[

–

2+

]

[

2+

]

[

–

2

]

First Time Operation

01GBKV21FQ10K.fm Page 8 Thursday, July 10, 2003 4:52 PM

GB

master page=right

9

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Introducing and Using the Menu System

Your TV uses an on-screen menu system to guide you through the operations. Use the

following buttons on the Remote Control to operate the menu system:

1 Press MENU to switch the menu on.

2 • To highlight the desired menu or option, press or .

• To enter to the selected menu or option, press .

• To return to the last menu or option, press

.

• To alter settings of your selected option, press / / or .

• To confirm and store your selection, press .

3 Press MENU to remove the menu from the screen.

Picture

The “Picture” menu allows you to

alter the picture adjustments.

To do this:

After selecting the item you want to

alter, press , then press / /

or

repeatedly to adjust it and

finally press to store the new

adjustment.

This menu also allows you to

customize the picture mode based

on the programme you are

watching:

Mode Live (for enhanced picture contrast and sharpness).

Movie (for a finely detailed picture).

Game (for a picture from game).

Personal (for your own custom settings).

Picture

Adjustment

Contrast Press or to reduce picture contrast.

Press or

to enhance picture contrast.

Brightness Press or to darken the picture.

Press or

to brighten the picture.

Colour Press or to decrease colour intensity.

Press or

to increase colour intensity.

Picture

Intelligent Picture:

On

Picture Adjustment

Mode: Live

Confirm

Select

End

Picture

Intelligent Picture:

On

Picture Adjustment

Mode: Live

Confirm

Select

End

Menu System

continued...

01GBKV21FQ10K.fm Page 9 Thursday, July 10, 2003 4:52 PM

master page=left

10

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

If any changes are made to “Picture Adjustment”, “Mode” will switch automatically to

“Personal” and the new setting will be stored as “Personal”.

Hue Press or to decrease the green tones.

Press or

to increase the green tones.

Hue can only be adjusted for NTSC colour signal (e.g. USA video tapes).

Sharpness Press or to soften the picture.

Press or

to sharpen the picture.

Reset Select to reset the picture to the factory preset levels.

Intelligent

Picture

On/Off Select to optimize the picture quality.

E.g. reduce noise level when signal is weak.

Menu System

01GBKV21FQ10K.fm Page 10 Thursday, July 10, 2003 4:52 PM

GB

master page=right

11

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Sound

The “Sound” menu allows you to alter

the sound adjustments.

To do this:

After selecting the item you want to

alter, press , then press

// or

repeatedly to adjust it and finally

press

to store it.

Mode Dynamic (dynamic and clear sound that emphasizes both the low and high

tones).

Drama (sound that emphasizes voice and high tones).

Soft (soft, natural and relaxing sound).

Personal (flat and smooth sound that can be customized by users).

Sound

Adjustment

Treble Press or to decrease higher-frequency sounds.

Press or

to increase higher-frequency sounds.

Bass Press or to decrease lower-frequency sounds.

Press or

to increase lower-frequency sounds.

Reset Select

to reset the sound to the factory preset.

Balance Press or to emphasize the left speaker.

Press or

to emphasize the right speaker.

Auto

Volume

On/Off

Volume level of the channels will stay the same, independent of the broadcast

signal (e.g., in the case of advertisements).

Sound Effect

(only for

KV-21FQ10K)

Off (normal).

Spatial (simulated stereo-like sound quality for mono program).

Surround (add surround effect to stereo program).

Select

Confirm

End

Sound

Mode:

Balance

Dynamic

Auto Volume: Off

Sound Effect: Off

Sound Adjustment

Select

Confirm

End

Sound

Mode:

Balance

Dynamic

Auto Volume: Off

Sound Effect: Off

Sound Adjustment

Menu System

01GBKV21FQ10K.fm Page 11 Thursday, July 10, 2003 4:52 PM

master page=left

12

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Timer

The “Timer” menu allows you to alter

the timer adjustments.

Sleep Timer The “Sleep Timer” option in the “Timer” menu allows you to select

a time period for the TV to switch itself automatically into the

standby mode.

To do this:

After selecting the option, press , then press or to set the

time period delay (max. of 1 hour 30 minutes) and finally press

to store.

• While watching the TV, you can press the button on

the remote control to display the time remaining.

• One minute before the TV switches itself into standby

mode, “TV will turn off soon” is displayed on the TV

screen automatically.

On Timer The “On Timer” option in the “Timer” menu allows you to select a

time period for the TV to switch itself automatically on from

standby mode.

To do this:

After selecting the option, press , then press or to set the

time period delay (max. of 12 hours) and finally press to store.

Finally press the standby button &/1 on the remote control. After

the selected length of time, the TV switches on automatically and

“On Timer” will appear on the screen.

• The standby indicator 1 on the TV set lights up in amber

to indicate that “On Timer” is active.

• Any loss of power will cause these settings to be cleared.

• If no buttons are pressed for more than one hour after the

TV is turned on using the “On Timer”, the TV

automatically goes into standby mode.

Timer

On Timer:

Sleep Timer: Off

Off

Select

Confirm

End

Timer

On Timer:

Sleep Timer: Off

Off

Select

Confirm

End

Menu System

01GBKV21FQ10K.fm Page 12 Thursday, July 10, 2003 4:52 PM

GB

master page=right

13

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Channel Set Up

The “Channel Set Up” menu allows

you to preset channels on this TV.

Auto Tuning The “Auto Tuning” option in the “Channel Set Up” menu allows

you to automatically search and store all available TV channels.

To do this:

After selecting the option, press and then proceed in the same

way as in step 4 of the section “Switching On the TV and

Automatically Tuning” (see page 7).

Programme

Sorting

The “Programme Sorting” option in the “Channel Set Up” menu

allows you to change the order in which the channels (TV

Broadcast) appear on the screen.

To do this:

After selecting the option, press and then proceed in the same

way as in step 5b) of the section “Switching On the TV and

Automatically Tuning” (see page 8).

Programme Labels The “Programme Labels” option in the “Channel Set Up” menu

allows you to name a channel using up to five characters (letters or

numbers).

To do this:

1 After selecting the option, press

. Press or to select the

programme number with the channel you wish to name, then

press .

2Press

. With the first element of the label column

highlighted, press or to select a letter or number (select

“_” for a blank), then press

to confirm this character. Select

the other four characters in the same way. Finally press to

store.

Select

End

Channel Set Up

Programme Labels

Manual Programme Preset

Programme Sorting

Auto Tuning

Confirm

Select

End

Channel Set Up

Programme Labels

Manual Programme Preset

Programme Sorting

Auto Tuning

Confirm

Menu System

continued...

01GBKV21FQ10K.fm Page 13 Thursday, July 10, 2003 4:52 PM

master page=left

14

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Manual

Programme

Preset

The “Manual Programme Preset” option in the “Channel Set Up”

menu allows you to:

a) Preset channels or a video input source one by one to the

programme order of your choice.

To do this:

1 After selecting the “Manual Programme Preset” option, press

. Highlight the Programme option and press . Press or

to select a programme number on which you want to preset

the channel (for VCR, select programme number “0”), then

press

.

The following option is only available depending on the

country you have selected in the “Language/Country”

menu.

2 After selecting the System option, press

. Press or to

select the TV Broadcast system (B/G for western European

countries or D/K for eastern European countries), then press

.

3 After selecting the Channel option, press

. Press or to

select the channel tuning (C for terrestrial channels or S for

cable channels). Next press . After that, press the number

buttons to directly enter the channel number of the TV

Broadcast. If you do not know the channel number, press or

to search for it. When you tune the desired channel, press

twice to store.

Repeat all the above steps to tune and store more channels.

b) Normally the automatic fine tuning (AFT) will give the best

possible picture, however you can manually fine tune the TV to

obtain a better picture if the picture is distorted.

To do this:

While watching the channel (TV Broadcast) you wish to fine

tune, select the AFT option and press . Next press

or to

adjust the fine tuning between -15 and +15. Finally press

twice to store.

c) Skip any unwanted programme numbers when they are selected

with the PROG +/– button.

To do this:

Highlighting the Programme option, press PROG +/– to select

the programme number you want to skip. When the

programme you want to skip appears on the screen, select the

Skip option and press . Next press

or to select Yes.

Finally press twice to confirm and store.

To cancel this function afterwards, select No instead of Yes in the step

above.

Menu System

01GBKV21FQ10K.fm Page 14 Thursday, July 10, 2003 4:52 PM

GB

master page=right

15

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Set Up

The “Set Up” menu allows you to

alter various options on this TV.

Language/

Country

The “Language/Country” option in the “Set Up” menu allows you to

select the language that the menus are displayed in.

To do this:

After selecting the option, press and then proceed in the same way

as in steps 2 and 3 of the section “Switching On the TV and

Automatically Tuning” (see page 7).

Picture Rotation Because of the earth’s magnetism, the picture might slant. In this case,

you can correct the picture slant by using the option “Picture

Rotation” in the “Set Up” menu.

To do this:

After selecting the option, press . Press

or ( or ) to correct

any slant of the picture. Finally press to store.

RGB Centring When connecting an RGB source, such as a “PlayStation”, you may

need to readjust the horizontal position of the picture. In that case, you

can readjust it through the “RGB Centring” option in the “Set Up”

menu.

To do this:

While watching an RGB source, select the “RGB Centring” option and

press . Press or to adjust the centre of the picture between -10

and +10. Finally press to confirm and store.

Select

End

Set Up

RGB Centring: 0

Picture Rotation

Language/Country

Confirm

Select

End

Set Up

RGB Centring: 0

Picture Rotation

Language/Country

Confirm

Menu System

01GBKV21FQ10K.fm Page 15 Thursday, July 10, 2003 4:52 PM

master page=left

16

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Teletext

Teletext is an information service transmitted by most TV stations. The index page of the

Teletext service (usually page 100) gives you information on how to use the service. To

operate Teletext, use the remote control buttons as indicated below.

Be sure to use a channel (TV Broadcast) with a strong signal, otherwise Teletext errors may

occur.

To switch on Teletext:

After selecting the TV channel which carries the Teletext service you wish to

view, press .

To select a Teletext page:

Input 3 digits for the page number, using the numbered buttons.

• If you have made a mistake, retype the correct page number.

• If the counter on the screen continues searching, it is because this page is not available. In that case,

input another page number.

To check the contents of a Teletext service:

Press .

To access the next or preceding page:

Press or .

To superimpose teletext on to the TV:

Whilst you are viewing Teletext, press . Press it again to cancel Teletext mode.

To freeze a teletext page:

Some Teletext pages have sub-pages which follow on automatically. To stop them, press

. Press it again to cancel the freeze.

To reveal concealed information (e.g., answer to a quiz):

Press . Press it again to conceal the information.

To enlarge the Teletext display:

Press . Each time you press , the Teletext display changes as follows: Enlarge upper

half t Enlarge lower half t Normal size.

To stand by for a Teletext page while watching a TV program.

1 Enter the Teletext number that you want to refer to, then press .

2 When the page number is displayed, press

to show the Text.

To switch off Teletext:

Press .

Fastext

Fastext service lets you access pages with one push of a button.

While you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at

the bottom of the teletext page. Press the colour button (red, green, yellow or blue) to access

the corresponding page.

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

Teletext

01GBKV21FQ10K.fm Page 16 Thursday, July 10, 2003 4:52 PM

GB

master page=right

17

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Connecting Optional Equipment

Using the following instructions, you can connect a wide range of optional equipment to

your TV set (connecting cables are not supplied).

Connecting a VCR:

To connect a VCR, please refer to the section “Connecting an aerial and VCR” of this instruction

manual. We recommend you connect your VCR using a Scart lead. If you do not have a Scart

lead, tune in the VCR test signal to the TV programme number “0” by using the “Manual

Programme Preset” option (for details on how to manually programme these presets, see page

14, step a).

Refer to your VCR instruction manual to find out how to find the output channel of your VCR.

Using Optional Equipment

1 Connect your equipment to the designated TV socket, as indicated above.

2 Switch on the connected equipment.

3 To watch the picture of the connected equipment, press repeatedly until the correct

input symbol appears on the screen.

4 Press button on the remote control to return to the normal TV picture.

Symbol Input Signals

1

•Audio / video input signal through the Scart connector C

1

•RGB input signal through the Scart connector C. This symbol appears

only if a RGB source has been connected.

2

•Audio / video input signal through the Scart connector D.

2

•S Video input signal through the Scart connector D.

3

•Video input signal through the phono socket A and Audio input signal

through B.

A

B

1

2

C

8mm/Hi8/

DVC

camcorder

DVD/VCR

“PlayStation”*

decoder

When you connect the

headphones, the TV

speakers will

automatically be muted

* “PlayStation”

is a product

of Sony Computer

Entertainment, Inc.

* “PlayStation

” is a trademark

of Sony Computer

Entertainment, Inc.

DVD

VCR

D

Additional Information

01GBKV21FQ10K.fm Page 17 Thursday, July 10, 2003 4:52 PM

master page=left

18

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Specifications

TV system:

Depending on your country selection:

B/G/H, D/K

Colour system:

PAL, SECAM

NTSC 3.58, 4.43 (only Video In)

Channel Coverage:

VHF: E2-E12

UHF: E21-E69

CATV: S1-S20

HYPER: S21-S41

D/K: R1-R12, R21-R69

Picture Tube:

Flat Display FD Trinitron

Rear Terminals

i1/ 21-pin Scart connector

(CENELEC standard) including

audio/video input, RGB input,

TV audio/video output.

i2/ 21-pin Scart connector

(CENELEC standard) including

audio/video input, S video

input, monitor audio/video

output.

Front Terminals

t3 video input – phono jack

3 audio input – phono jacks

headphones jack

Sound Output:

2 x 10 W (music power)

2 x 5 W (RMS)

Power Consumption:

66 W

Standby Power Consumption:

< 1 W

Dimensions (w x h x d):

•KV-21CL10K: Approx. 630 x 460 x 492 mm

•KV-21FQ10K: Approx. 589 x 463 x 479 mm

Weight:

•KV-21CL10K: Approx. 25 kg

•KV-21FQ10K: Approx. 26 kg

Accessories supplied:

1 Remote Control (RM-W100)

2 Batteries (IEC designated)

Other features:

•Teletext, Fastext, TOPtext

•Sleep Timer

•On Timer

•TV system Autodetection

Design and specifications are subject to change without notice.

Ecological Paper- Totally Chlorine Free

Additional Information

01GBKV21FQ10K.fm Page 18 Thursday, July 10, 2003 4:52 PM

GB

master page=right

19

KV-21FQ10K_Grp U11_GB

4-093-929-51(2)

Troubleshooting

Here are some simple solutions to the problems which may affect the picture and sound.

In case of problems, have your TV serviced by qualified personnel. Never open the casing

yourself.

Problem Solution

No picture (screen is dark) and no

sound.

•Check the aerial connection.

•Plug the TV in and press the ! button on the front of

TV.

•If the standby indicator 1 is on, press &/1 button on

the remote control.

•Press the ! button on the front of the TV to switch off

the TV for about 5 seconds, then switch it on again.

Poor or no picture (screen is dark),

but good sound.

•Using the menu system, select the “Picture

Adjustment” menu and select “Reset” to return to

factory settings (see page 9).

No picture or no menu information

from equipment connected to the

Scart connector.

•Check that the optional equipment is on and press

repeatedly on the remote control until the correct

input symbol is displayed on the screen (see page 17).

Good picture, no sound. •Press the + button on the remote control.

•Check that headphones are not connected.

No colour on colour programmes. • Using the menu system, select the “Picture

Adjustment” menu and select “Reset” to return to

factory settings (see page 9).

Distorted picture when changing

programmes or selecting teletext.

•Turn off any equipment connected to the Scart

connector on the rear of the TV.

Wrong characters appear when

viewing teletext.

•Using the menu system, enter the “Language/

Country” option in the “Set Up” menu and select the

country in which you operate the TV set. For Cyrillic

languages, we recommend to select Russia in the case

that your own country does not appear in the list (see

page 15).

Picture slanted •Using the menu system, select the “Picture Rotation”

option in the “Set Up” menu to correct the picture

slant (see page 15).

Noisy picture when viewing a TV

channel.

•Using the menu system, select the “Manual

Programme Preset” menu and adjust Fine Tuning

(AFT) to obtain better picture reception (see page 14).

•Using the menu system, select the “Intelligent

Picture” option in the “Picture” menu and select

“On” to reduce the noise in the picture (see page 9).

Remote control does not function. •Replace the batteries.

The standby indicator 1 on the TV

flashes red.

•Contact your nearest Sony service centre.

Additional Information

01GBKV21FQ10K.fm Page 19 Thursday, July 10, 2003 4:52 PM

Strona jest ładowana ...

Sony KV-21CL10K Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Sony KV-21CL10K Instrukcja obsługi

w innych językach

Powiązane dokumenty