WWW.POLKAUDIO.COMPOLK/MOMO: CHAMPIONSHIP PERFORMANCE
Please inspect your loudspeaker(s) carefully. Notify your Polk Audio dealer if you notice any
damage or missing items. Keep the carton and packing material; this will do the best job of
protecting your speaker(s) if they must be transported.
Your Polk Audio Loudspeakers are constructed of the highest quality materials for years of
trouble-free performance. However, damage to loudspeakers can occur when an amplifier,
regardless of its wattage, is made to play at higher listening levels than its power can clearly
produce. This is usually beyond the "noon or 1 o'clock" position on the volume control.
Operation at this level can result in very high levels of audible distortion originating in
the amplifier, which can add a harsh, gritty sound to your listening material. If you hear
distortion—turn it down! Contrary to popular belief, a speaker is more likely to be dam-
aged by trying to get too much volume from a low-powered amplifier or receiver than
from a high-powered one.
If, after following the hookup directions, you experience difficulty, please double-check all
wire connections. Should you isolate the problem to the speaker, contact the authorized
Polk Audio dealer where you made your purchase, or contact Polk Audio Customer Service
800-377-7655 (M-F, 9-6 EST, US only) or via email [email protected]. Outside the US,
call 410-358-3600.
More detailed information—including audio how-to articles, sub box plans, FAQs, and
online manuals—is available on our award-winning website www.polkaudio.com.
• Woven Dynamic Balance®Carbon Fiber Cone provides the ideal balance of stiff-
ness and low mass for the clearest, most detailed midrange performance, and
lowest distortion, of any speaker in its class. (MMC460 features stiff Polypropylene
Cone with Carbon Fiber Dustcap.)
• 25mm Liquid-Cooled Silk/Polymer Composite Dome Tweeter with Neodymium
magnet for clear, detailed highs. (MMC690 Model features 30mm Tweeter &
19mm Super-Tweeter, MMC460 features 19mm Tweeter.)
• 15º Swivel Tweeter Housing delivers direct, detailed imaging. (Fixed Tweeter on
the MMC570 and MMC410.)
•Patented design, channel vented, acoustically inert Cast Aluminum Basket for
superior stiffness and better heat dissipation. (MMC460 features tough ABS plate
& basket, and the MMC410 features stamped metal basket.)
•By-passable, vented Outboard 2nd Order x2 (High and Low) Crossover with
Glass Epoxy Board/Air-Core Inductor components for better dynamic impact and
transparency. Crossover Housing has multiple mounting options (screw or
“zip” tie) for the ultimate system installation choices. (MMC460 features an
onboard crossover.)
• Muscular ABS Grilles based on exclusive MOMO designs (no grille on MMC460
MMC410, and MMC570).
• Airtight Rubber Surround stands up to moisture, sunlight and extreme tempera-
tures while allowing long excursion linear motion and years of reliable use.
•Strong, fire-retardant flat NOMEX®Spider allows extended linear motion while
providing highly reliable mechanical stability.
• Laser-based, Klippel-optimized, channel vented 2-Layer 25mm Kapton Voice Coil
and Former for high heat dissipation (Kapton’s melting temperature is
725°F/400°C!) and extreme power handling. (MMC690 features 35.5mm Kapton
Voice Coil.)
•Multi-Hole Mounting Pattern; high vehicle
application ratio for easy drop-in installations
in most cars.
• High Temp ABS Magnet Cup, removable for up
to 1/8” install flexibility. (All models except for
the MMC460 and the MMC410.)
• Convenient removable multi-hole 19mm ABS
Spacer Ring for more installation flexibility in
import car models (such as most pre-’03
Civics & Accords - MMC650 ONLY).
•Dual Nickel Plated Polarized Terminals for component-like connections.
Truly “bi-ampable”! (All models except MMC460.)
•Built tough and backed by a three-year parts & labor warranty, one
of the best warranties in the car audio world.
POLK/MOMO: CHAMPIONSHIP PERFORMANCE WWW.POLKAUDIO.COM
Polk Audio, Inc., warrants to the original retail purchaser
only. This warranty will terminate automatically prior to its
stated expiration if the original retail purchaser sells or
transfers the Product to any other party.
Polk Audio, Inc., warrants, to the original retail purchaser
only, that the LOUDSPEAKER(S), PASSIVE CROSSOVER
COMPONENT(S) and ENCLOSURE on this Polk Audio
Loudspeaker Product will be free from defects in material
and workmanship for a period of three (3) years from the
date of original retail purchase from a Polk Audio
Authorized Dealer.
To allow Polk Audio to offer the best possible warranty
service, please register your new product online at:
www.polkaudio.com/registration or call Polk customer
service 800-377-7655 in the USA and Canada (outside
the USA: 410-358-3600) within ten (10) days of the
date of original purchase. Be sure to keep your original
purchase receipt.
Defective Products must be shipped, together with proof of
purchase, prepaid insured to the Polk Audio Authorized
Dealer from whom you purchased the Product, or to the
Factory at 2550 Britannia Boulevard, Suite A, San Diego,
California 92154. Products must be shipped in the original
shipping container or its equivalent; in any case the risk of
loss or damage in transit is to be borne by you. If upon
examination at the Factory or Polk Audio Authorized Dealer
it is determined that the unit was defective in materials or
workmanship at any time during this Warranty period,
Polk Audio or the Polk Audio Authorized Dealer will, at
its option, repair or replace this Product at no additional
charge, except as set forth below. All replaced parts and
Products become the property of Polk Audio. Products
replaced or repaired under this warranty will be returned
to you, within a reasonable time, freight prepaid.
This warranty does not include service or parts to repair
damage caused by accident, disaster, misuse, abuse,
negligence, inadequate packing or shipping procedures,
commercial use, voltage inputs in excess of the rated
maximum of the unit, cosmetic appearance of cabinetry
not directly attributable to defect in materials or workman-
ship, or service, repair, or modification of the Product
which has not been authorized or approved by Polk Audio.
This warranty shall terminate if the Serial number on the
Product has been removed, tampered with or defaced.
This warranty is in lieu of all other expressed Warranties.
If this Product is defective in materials or workmanship as
warranted above, your sole remedy shall be repair or replace-
ment as provided above. In no event will Polk Audio, Inc. be
liable to you for any incidental or consequential damages
arising out of the use or inability to use the Product, even if
Polk Audio, Inc. or a Polk Audio Authorized Dealer has been
advised of the possibility of such damages, or for any claim
by any other party. Some states do not allow the exclusion or
limitation of consequential damages, so the above limitation
and exclusion may not apply to you.
All implied warranties on this Product are limited to the
duration of this expressed Warranty. Some states do not
allow limitation on how long an implied Warranty lasts, so
the above limitations may not apply to you. This Warranty
gives you specific legal rights, and you also may have other
rights which vary from state to state.
This Warranty applies only to Products purchased in
Canada, the United States of America, its possessions, and
U.S. and NATO armed forces exchanges and audio clubs.
The Warranty terms and conditions applicable to Products
purchased in other countries are available from the Polk
Audio Authorized Distributors in such countries.
Type 6" x 9" 5" x 7" 62" 54"4" x 6" 4" x 10"
3-way coaxial coaxial coaxial plate coaxial
Driver complement 6" x 9" 5" x 7” 6 1/2" 5 1/4" 4" x 6" 4" x 10"
(15.2cm x 22.9cm) (12.7cm x 17.8cm) (16.5cm) (13cm) (10cm x 15cm) (10 cm x 25 cm)
mid/woofer mid/woofer mid/woofer mid/woofer mid/woofer, mid/woofer
Tweeter complement 1" (25.4mm) 1" (25.4mm) 1" (25.4mm) 1" (25.4mm) 1" (25.4mm) 1" (25.4mm)
silk tweeter, silk tweeter silk tweeter silk tweeter silk tweeter silk tweeter
14" (31.8mm)
silk tweeter
Mounting 8 5/8" x 5 5/8" 7 1/8" x 4 3/4" 5" 4 5/8" 6" x 4" 9 5/16" x 3 13/16"
dimensions (219.1mm (181mm (127mm) (117.5mm) (152.4mm (236mm
x 142.9mm) x 121mm) x 101.6mm) x 96.5mm)
Mounting depth 3 1/4" w/o cup 2 9/16" w/o cup 2 7/16" w/o cup 2 9/16" w/o cup 2" 2 9/16"
(top) (82.5mm) (65.1mm) (61.9mm) (65.1mm) (50.8mm) (65.1mm)
3 5/8" w/cup 2 15/16" w/cup 2 11/16" w/cup 2 13/16" w/cup
(92.1mm) (74.6mm) (68.3mm) (71.4mm)
Mounting depth 3 3/8" w/o cup 2 11/16" w/o cup 2 9/16" w/o cup 2 1/2" w/o cup 2 1/4" 3 1/16"
(bottom) (85.7mm) (68.3mm) (65.1mm) (50.8mm) (57.2mm) (78.1mm)
3 13/16" w/cup 2 15/16" w/cup 2 13/16" w/cup 2 3/4" w/cup
(96.8mm) (74.6mm) (71.4mm) (69.9mm)
Peak Power handling 300w 180w 180w 140w 100w 140w
Continuous Power 100w 80w 80w 70w 50w 70w
handling
Nominal Imp. 4 ohms 4 ohms 4 ohms 4 ohms 4 ohms 4 ohms
Freq. response 33-25kHz 40-25kHz 43-25kHz 53-25kHz 73-25kHz 40-25kHz
Sensitivity 91dB 90dB 90dB 89dB 88dB 89dB
-
1
-
2
-
3
-
4
-
5
w innych językach
- English: Polk Momo MMC410 Owner's manual
Inne dokumenty
-
Sea Ray 2007 240DA Parts Manual
-
-
-
-
-
-
-
-
Polk SR2 instrukcja
-