MultiSync LCD1525M
Podr´cznik u˝ytkowinka
Declaration
Declaration of the Manufacturer
We hereby certify that the colour monitor
MultiSync LCD1525M (LA-1528HMW)
(LA-1528HMW-BK)
are in compliance with
Council Directive 73/23/EEC:
- EN 60950
Council Directive 89/336/EEC:
- EN 55022
- EN 61000-3-2
- EN 61000-3-3
- EN 55024
and marked with
NEC-Mitsubishi Electric Visual Systems, Corp.
686-1, NISHIOI OI-MACHI
ASHIGARAKAMI-GUN
KANAGAWA 258-8533, JAPAN
For the Customer to use in
U.S.A. or Canada
Canadian Department of Communications
Compliance Statement
DOC: This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouiller du Canada.
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety
Regulations according to C.S.A. C22.2 #950.
Ce produit porte la marque ‘C-UL’ et se conforme aux règlements de
sûrele Canadiens selon CAN/CSA C22.2 No. 950.
FCC Information
1. Use the attached specified cables with the MultiSync LCD1525M
colour monitor so as not to interfere with radio and television
reception.
(1) The power supply cord you use must have been approved by
and comply with the safety standards of U.S.A., and meet the
following condition.
Power supply cord Non shield type, 3-conductor
Length 1.8 m
Plug shape
(2) Please use the supplied AC Adapter which is include in stand.
(3) Shielded video signal cable.
Use of other cables and adapters may cause interference with
radio and television reception.
(4) Please use supplied USB cable.
(5) Please use supplied audio cable.
2. This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy, and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult your dealer or an experienced radio/TV technician for
help.
If necessary, the user should contact the dealer or an experienced
radio/television technician for additional suggestions. The user may
find the following booklet, prepared by the Federal Communications
Commission, helpful: “How to Identify and Resolve Radio-TV
Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, D.C., 20402, Stock No. 004-
000-00345-4.
DECLARATION OF
CONFORMITY
This device complies with Part 15 of FCC Rules. Operation is subject to
the following two conditions. (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
U.S. Responsible party: NEC-Mitsubishi Electronics
Display of America, Inc.
Address: 1250 N. Arlington Heights Road
Itasca, Illinois 60143-1248
Tel. No.: (630)467-3000
Type of Product: Computer Monitor
Equipment Classification: Class B Peripheral
Models: MultiSync LCD1525M
We hereby declare that the equipment specified above conforms
to the technical standards as specified in the FCC Rules.
LA-1528HMW-BK only
TCO’95
Congratulations! You have just
purchased a TCO’95 approved and
labelled product! Your choice has
provided you with a product developed
for professional use. Your purchase has
also contributed to reducing the burden
on the environment and also, to the
further development of environmentally
adapted electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established
method for encouraging the adaptation of goods and services to the
environment. The main problem, as far as computers and other
electronics equipment are concerned, is that environmentally harmful
substances are used both in the products and during the manufacturing.
Since it is as yet not possible to satisfactorily recycle the majority of
electronics equipment, most of these potentially damaging substances
will eventually enter the environment.
There are also other characteristics of a computer, such as energy
consumption levels, that are important from the viewpoints of both the
work (internal) and natural (external) environments. Since all methods of
conventional electricity generation have a negative effect on the
environment (acidic and climate-influencing emissions, radioactive
waste, etc.), it is vital to conserve energy. Electronics equipment in
offices consume an enormous amount of energy since they are often left
running continuously.
What does labelling involve?
This product meets the requirements for the TCO’95 scheme which
provides for international and environmental labelling of personal
computers. The labelling scheme was developed as a joint effort by the
TCO (The Swedish Confederation of Professional Employees),
Naturskyddsforeningen (The Swedish Society for Nature Conservation)
and NUTEK (The National Board for Industrial and Technical
Development in Sweden).
The requirements cover a wide range of issues: environment,
ergonomics, usability, emission of electrical and magnetic fields, energy
consumption and electrical and fire safety.
The environmental demands concern restrictions on the presence and
use of heavy metals, brominated and chlorinated flame retardants,
CFCs (freons) and chlorinated solvents, among other things. The
product must be prepared for recycling and the manufacturer is obliged
to have an environmental plan which must be adhered to in each
country where the company implements its operational policy.
The energy requirements include a directive that the computer and/or
display, after a certain period of inactivity, shall reduce its power
consumption to a lower level. The length of time to reactivate the
computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for
example, in respect of the reduction of electric and magnetic fields,
physical and visual ergonomics and good usability.
On the back page of this folder, you will find a brief summary of the
environmental requirements met by this product. The complete
environmental criteria document may be ordered from:
TCO Development Unit
S-114 94 Stockholm
Sweden
Fax: +46 8 782 92 07
Email: [email protected]
Current information regarding TCO’95 approved and labelled products
may also be obtained via the Internet, using the address:
http://www.tco-info.com/
TCO’95 is a co-operative project between TCO (The Swedish
Confederation of Professional Employees), Naturskyddsforeningen
(The Swedish Society for Nature Conservation) and NUTEK (The
National Board for Industrial and Technical Development in Sweden).
Environmental Requirements
Brominated flame retardants
Brominated flame retardants are present in printed circuit boards,
cables, wires, casings and housings. In turn, they delay the spread of
fire. Up to thirty percent of the plastic in a computer casing can consist
of flame retardant substances. These are related to another group of
environmental toxins, PCBs, which are suspected to give rise to similar
harm, including reproductive damage in fisheating birds and mammals,
due to the bio-accumulative* processes. Flame retardants have been
found in human blood and researchers fear that disturbances in foetus
development may occur.
TCO’95 directive requires that plastic components weighing more than
25 grams must not contain organically bound chlorine and bromine.
Lead**
Lead can be found in picture tubes, display screens, solders and
capacitors. Lead damages the nervous system and in higher doses,
causes lead poisoning.
TCO’95 requirement permits the inclusion of lead since no replacement
has yet been developed.
Cadmium**
Cadmium is present in rechargeable batteries and in the
colourgenerating layers of certain computer displays. Cadmium
damages the nervous system and is toxic in high doses.
TCO’95 requirement states that batteries may not contain more than
25 ppm (parts per million) of cadmium. The colourgenerating layers of
display screens must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches and back-
light system. Mercury damages the nervous system and is toxic in high
doses.
TCO’95 requirement states that batteries must not contain more than
25 ppm (parts per million) of mercury. It also demands that no mercury
is present in any of the electrical or electronics components concerned
with the display unit except the back-light system.
CFCs (freons)
CFCs (freons) are sometimes used for washing printed circuit boards
and in the manufacturing of expanded foam for packaging. CFCs break
down ozone and thereby damage the ozone layer in the stratosphere,
causing increased ultraviolet light to enter the earth‘s atmosphere with
consequent increased risks of skin cancer (malignant melanoma).
The relevant TCO’95 requirement: Neither CFCs nor HCFCs may be
used during the manufacturing of the product or its packaging.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
LA-1528HMW only
TCO’99
Congratulations! You have just purchased a
TCO’99 approved and labelled product! Your
choice has provided you with a product
developed for professional use. Your purchase
has also contributed to reducing the burden
on the environment and also to the further
development of environmentally adapted
electronics products.
Why do we have environmentally labelled computers?
In many countries, environmental labelling has become an established
method for encouraging the adaptation of goods and services to the
environment. The main problem, as far as computers and other
electronics equipment are concerned, is that environmentally harmful
substances are used both in the products and during their manufacture.
Since it is as yet not possible to satisfactorily recycle the majority of
electronics equipment, most of these potentially damaging substances
will eventually enter the environment.
There are also other characteristics of a computer, such as energy
consumption levels, that are important from the viewpoints of both the
work (internal) and natural (external) environments. Since all methods of
electricity generation have a negative effect on the environment (e.g.
acidic and climate-influencing emissions, radioactive waste), it is vital to
save energy. Electronics equipment in offices is often left running
continuously and thereby consumes a lot of energy.
What does labelling involve?
This product meets the requirements for the TCO’99 scheme which
provides for international and environmental labelling of personal
computers. The labelling scheme was developed as a joint effort by
the.TCO (The Swedish Confederation of Professional Employees),
Svenska Naturskyddsforeningen (The Swedish Society for Nature
Conservation) and Statens Energimyndighet (The Swedish National
Energy Administration).
Approval requirements cover a wide range of issues: environment,
ergonomics, usability, emission of electric and magnetic fields, energy
consumption and electrical and fire safety.
The environmental demands impose restrictions on the presence and
use of heavy metals, brominated and chlorinated flame retardants,
CFCs (freons) and chlorinated solvents, among other things. The
product must be prepared for recycling and the manufacturer is obliged
to have an environmental policy which must be adhered to in each
country where the company implements its operational policy.
The energy requirements include a directive that the computer and/or
display, after a certain period of inactivity, shall reduce its power
consumption to a lower level. The length of time to reactivate the
computer shall be reasonable for the user.
Labelled products must meet strict environmental demands, for
example, in respect of the reduction of electric and magnetic fields,
physical and visual ergonomics and good usability.
Below you will find a brief summary of the environmental requirements
met by this product. The complete environmental criteria document may
be ordered from:
TCO Development
SE-114 94 Stockholm, Sweden
Fax: +46 8 782 92 07
Email: [email protected]
Current information regarding TCO’99 approved and labelled products
may also be obtained via the Internet, using the address:
http://www.tco-info.com/
Environmental requirements
Flame retardants
Flame retardants are present in printed circuit boards, cables, wires,
casings and housings. Their purpose is to prevent, or at least to delay
the spread of fire. Up to 30% of the plastic in a computer casing can
consist of flame retardant substances. Most flame retardants contain
bromine or chloride, and those flame retardants are chemically related
to another group of environmental toxins, PCBs. Both the flame
retardants containing bromine or chloride and the PCBs are suspected
of giving rise to severe health effects, including reproductive damage in
fish-eating birds and mammals, due to the bioaccumulative* processes.
Flame retardants have been found in human blood and researchers fear
that disturbances in foetus development may occur.
The relevant TCO’99 directive requires that plastic components weighing
more than 25 grams must not contain flame retardants with organically
bound bromine or chlorine. Flame retardants are allowed in the printed
circuit boards since no substitutes are available.
Cadmium**
Cadmium is present in rechargeable batteries and in the colourgenerating
layers of certain computer displays. Cadmium damages the nervous
system and is toxic in high doses. The relevant TCO’99 requirement
states that batteries, the colour-generating layers of display screens and
the electrical or electronics components must not contain any cadmium.
Mercury**
Mercury is sometimes found in batteries, relays and switches. It
damages the nervous system and is toxic in high doses. The relevant
TCO’99 requirement states that batteries must not contain any mercury.
It also demands that mercury is not present in any of the electrical or
electronics components associated with the labelled unit.
CFCs (freons)
The relevant TCO’99 requirement states that neither CFCs nor HCFCs
may be used during the manufacture and assembly of the product.
CFCs.(freons) are sometimes used for washing printed circuit boards.
CFCs break down ozone and thereby damage the ozone layer in the
stratosphere, causing increased ultraviolet light to enter the earth‘s
atmosphere with increased risks of skin cancer (malignant melanoma)
as a consequence.
Lead**
Lead can be found in picture tubes, display screens, solders and
capacitors. Lead damages the nervous system and in higher doses
causes lead poisoning. The relevant TCO’99 requirement permits the
inclusion of lead since no replacement has yet been developed.
* Bio-accumulative is defined as substances which accumulate within living organisms.
** Lead, Cadmium and Mercury are heavy metals which are Bio-accumulative.
ENERGYSTAR is a U.S. trademark,
As an ENERGYSTAR
®
Partner, NEC-Mitsubishi Electronics Display of America, Inc. has
determined that this product meets the ENERGYSTAR guidelines for energy efficiency. The
ENERGYSTAR emblem does not represent EPA endorsement of any product or service.
IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of
International Business Machines Corporation.
Apple and Macintosh are registered trademarks of Apple Computer Inc.
Microsoft and Windows are registered trademarks of the Microsoft Corporation.
NEC is a registered trademark of NEC Corporation.
All other trademarks or registered trademarks are property of their respective owners.
Polski-1
Polski
Wprowadzenie do NEC
MultiSync LCD1525M
Gratulacje z okazji zakupu monitora NEC MultiSync LCD1525M, który
wiernie odtwarza kolory!
Rozszerzona zgodnoÊç
Monitor MultiSync LCD jest ca∏kowicie analogowy i dlatego nie wymaga
dodatkowego przetwornika analogowo-cyfrowego; mo˝e bezpoÊrednio
przyjmowaç wejÊciowy sygna∏ RGB.
Zmniejszona podstawa
Zapewnia doskona∏e rozwiàzania dla Êrodowiska pracy dajàc Êwietnà
jakoÊç obrazu przy zmniejszonych rozmiarach i ci´˝arze. Ma∏a podstawa
monitora i niski ci´˝ar umo˝liwiajà jego ∏atwe przenoszenie z jednego
miejsca na inne.
Uk∏ad sterowania kolorami
Umo˝liwia dopasowanie kolorów na ekranie do ró˝nych standardów.
Panel sterowania OSM (On-Screen Manager):
Umo˝liwia ∏atwe i szybkie ustawienie wszystkich parametrów obrazu na
ekranie przy pomocy ∏atwego w u˝yciu menu ekranowego.
W∏aÊciwoÊci ergonomiczne
W∏aÊciwoÊci konstrukcyjne monitora odpowiadajà zasadom ergonomii,
co umo˝liwia polepszenie Êrodowiska pracy, chroni zdrowie
u˝ytkownika, oszcz´dza pieniàdze. Dzi´ki ergonomicznemu uk∏adowi
ustawienie odpowiednich parametrów obrazu przy pomocy panelu
sterowania OSM jest szybkie i ∏atwe, przechylna podstawa monitora
umo˝liwia ustawienie ulubionego kàta patrzenia na ekran, a ma∏y Êlad
wiàzki jest zgodny z normami MPRII w zakresie obni˝onej emisji.
Polski-2
Plug and Play
Rozwiàzania techniczne Microsoft
®
w zakresie systemu operacyjnego
Windows
®
umo˝liwiajà instalacj´, podczas której monitor wysy∏a swoje
dane (takie, jak rozmiar ekranu i obs∏ugiwane rozdzielczoÊci)
bezpoÊrednio do komputera, automatycznie optymalizujàc prac´ ekranu.
Uk∏ad IPM (Intelligent Power Manager -
Inteligentny Zarzàdca Zasilania)
Obs∏uguje innowacyjne metody oszcz´dzania energii, które umo˝liwiajà
prze∏àczanie monitora na ni˝szy poziom zu˝ycia energii, gdy jest on
w∏àczony, ale nie pracuje, obni˝ajàc o dwie trzecie koszty energii,
redukujàc emisj´ oraz obni˝ajàc koszty zwiàzane z klimatyzacjà
miejscapracy.
Technologia Obs∏ugi Wielu Cz´stotliwoÊci
Automatycznie dopasowuje monitor do cz´stotliwoÊci skanowania karty
graficznej wyÊwietlajàc tym samym obraz o wymaganej rozdzielczoÊci.
Mo˝liwoÊç pe∏nego skanowania
Umo˝liwia u˝ywanie ca∏ej powierzchni ekranu przy najwy˝szej
rozdzielczoÊci, znacznie zwi´kszajàc wymiary obrazu.
Polski-3
Polski
ZawartoÊç
W pudle z Twoim nowym monitorem NEC MultiSync LCD powinny
znajdowaç si´ nast´pujàce elementy:
– NEC MultiSync LCD1525M.
– Przewód zasilajàcy.
– Przewód sygna∏owy Video.
– Przewód sygna∏owy Audio.
– Przewód USB.
– Instrukcja obs∏ugi.
– CD ROM (zawiera pelna Instrukcje obs∏ugi w formacie PDF).
Oryginalne pud∏o i pozosta∏e cz´Êci opakowania nale˝y zachowaç w celu
transportu lub wysy∏ki monitora.
MultiSync LCD1525M
monitor oraz kabel sygna∏owy video
Kabel zasilajàcy Kabel Audio
Kabel USB
Znak B przyznany przez POLSKIE
CENTRUM BADA¡ I CERTYFIKACJI
Polski-4
Zalecenia eksploatacyjne
Zasady bezpieczeƒstwa i utrzymania
W celu utrzymania optymalnych parametrów pracy monitora kolorowego
MultiSync LCD nale˝y podczas ustawiania i eksploatacji przestrzegaç
nast´pujàcych zasad:
• NIE OTWIERAå MONITORA. Wewnàtrz monitora nie ma ˝adnych
elementów, które u˝ytkownik móg∏by obs∏ugiwaç. Zdj´cie pokryw
grozi pora˝eniem pràdem elektrycznym oraz innymi
niebezpieczeƒstwami. Wszelkie prace serwisowe mo˝e wykonywaç
jedynie wykwalifikowany personel.
• Nale˝y zapewniç wystarczajàcà wentylacj´ wokó∏ monitora w celu
w∏aÊciwego rozproszenia ciep∏a. Nie wolno zas∏aniaç otworów
wentylacyjnych oraz nie wolno umieszczaç monitora w pobli˝u
grzejników lub innych êróde∏ ciep∏a. Nie wolno niczego k∏aÊç na górnà
cz´Êç monitora.
• Nie wolno k∏aÊç ˝adnych obiektów na monitorze ani u˝ywaç go na
zewnàtrz.
• Nie wolno rozlewaç cieczy na obudow´ monitora ani u˝ywaç go
wpobli˝u wody.
• Nie wolno wk∏adaç przedmiotów w szczeliny obudowy, poniewa˝
mogà dotykaç elementów znajdujàcych si´ pod napi´ciem, co mo˝e
spowodowaç zagro˝enie dla zdrowia lub ˝ycia, pora˝enie pràdem
elektrycznym, po˝ar lub uszkodzenie sprz´tu.
• Nie wolno umieszczaç ˝adnych ci´˝kich przedmiotów na przewodzie
zasilajàcym. Uszkodzenie przewodu zasilajàcego mo˝e spowodowaç
pora˝enie pràdem lub po˝ar.
• Nie wolno k∏aÊç monitora na pochy∏ych lub niestabilnych wózkach,
stojakach lub sto∏ach, poniewa˝ monitor mo˝e upaÊç i w rezultacie
ulec zniszczeniu lub niebezpiecznej awarii.
• Wyj´cie wtyczki przewodu zasilajàcego jest podstawowym sposobem
na od∏àczenie monitora od zasilania. Monitor powinien byç
zainstalowany w pobli˝u gniazdka, do którego jest ∏atwy dost´p.
• Je˝eli monitor MultiSync LCD jest zasilany pràdem przemiennym
onapi´ciu 100 – 240 V, nale˝y stosowaç przewód zasilajàcy
odpowiedni do napi´cia zasilania sieci. Przewód zasilajàcy musi
odpowiadaç normom bezpieczeƒstwa kraju, w którym jest u˝ywany.
Polski-5
Polski
• Podczas transportu nale˝y ostro˝nie obchodziç si´ z monitorem.
Opakowanie nale˝y zachowaç na wypadek transportu monitora
wprzysz∏oÊci.
• Lampa fluorescencyjna znajdujàca si´ wewnàtrz monitora zawiera
rt´ç. Nale˝y post´powaç zgodnie z miejscowymi przepisami
oochronie Êrodowiska podczas likwidacji monitora.
• Nie zginaç przewodu zasilajàcego.
• Nie nale˝y eksploatowaç monitora w miejscach o wysokiej
temperaturze, du˝ej wilgotnoÊci, du˝ym zapyleniu lub du˝ym
zabrudzeniu smarami czy olejami.
• Nie zakrywaç otworów wentylacyjnych monitora.
• W razie uszkodzenia monitora nie wolno dotykaç ciek∏ych kryszta∏ów.
W razie zaistnienia nast´pujàcych okolicznoÊci nale˝y niezw∏ocznie
od∏àczyç komputer od gniazdka zasilajàcego i zwróciç si´ do
wykwalifikowanego serwisu technicznego:
• Gdy przewód zasilajàcy lub wtyczka sà uszkodzone.
• W razie rozlania cieczy lub wpadni´cia jakichÊ przedmiotów do
monitora.
• Je˝eli monitor zosta∏ nara˝ony na dzia∏anie deszczu lub wody.
• Je˝eli monitor spad∏ lub obudowa zosta∏a uszkodzona.
PRAWID¸OWE USTAWIENIE MONITORA ORAZ
ODPOWIEDNIA REGULACJA ZMNIEJSZAJÑ
ZM¢CZENIE OCZU, RAMION i SZYI. NALE˚Y
ZASTOSOWAå SI¢ DO PONI˚SZYCH
WSKAZÓWEK:
• Po w∏àczeniu zaleca si´ odczekaç 20 minut na nagrzanie si´
monitora.
• Nale˝y tak ustawiç wysokoÊç monitora, aby górna cz´Êç ekranu
znajdowa∏a si´ troch´ poni˝ej poziomu oczu. Oczy powinny byç
skierowane lekko w dó∏ podczas patrzenia w Êrodek ekranu.
• Monitor nale˝y umieÊciç nie bli˝ej ni˝ 40 cm i nie dalej ni˝ 70 cm od
oczu. Optymalnà odleg∏oÊcià dla monitora MultiSync LCD1525M
jest53 cm.
• Okresowo nale˝y daç oczom odpoczàç patrzàc na przedmiot
oddalony o przynajmniej 6 m. Nale˝y cz´sto mrugaç.
• Nale˝y umieÊciç monitor pod kàtem 90° w stosunku do okna i innych
êróde∏ Êwiat∏a w celu zminimalizowania odblasków. Ustawiç przechy∏
monitora tak, aby Êwiat∏o sufitowe nie odbija∏o si´ na ekranie.
Polski-6
• Je˝eli odbijajàce si´ Êwiat∏o utrudnia patrzenie na ekran, nale˝y
zastosowaç filtr antyodblaskowy.
• Powierzchni´ monitora LCD nale˝y czyÊciç mi´kkà szmatkà nie
zostawiajàcà nitek. Nie zaleca si´ stosowania jakichkolwiek Êrodków
myjàcych lub zmywaczy do szk∏a!
• Nale˝y ustawiç jasnoÊç i kontrast monitora w celu uzyskania
optymalnej widzialnoÊci.
• Uchwyty na dokumenty nale˝y ustawiaç blisko ekranu.
• To, na co patrzy si´ najcz´Êciej (ekran lub dokumenty), powinno
znajdowaç si´ na wprost w celu zmniejszenia kr´cenia g∏owà
podczas pisania.
• Nale˝y unikaç wyÊwietlania przez d∏ugi czas na ekranie sta∏ego,
niezmieniajàcego si´ obrazu w celu unikni´cia poÊwiaty (efekty
powidokowe).
• Nale˝y regularnie kontrolowaç wzrok.
Polski-7
Polski
Instalacja
Aby pod∏àczyç monitor MultiSync LCD1525M do Twojego systemu,
post´puj wed∏ug poni˝szych wskazówek:
1. Wy∏àcz zasilanie komputera.
2. Komputery PC: Pod∏àcz 15-pinowy przewód sygna∏owy mini
D-SUBdo gniazda w karcie graficznej (R
y
sunekA.1). Dokr´ç
wszystkieÊruby.
Komputery Mac: W∏àcz przejÊciówk´ monitora MultiSync LCD1525M
Macintosh do komputera (R
y
sunek B.1). Pod∏àcz 15-pinowà
koƒcówk´ mini D-SUB kabla sygna∏owego do przejÊciówki monitora
MultiSync LCD1525M w komputerze Macintosh (R
y
sunek B.1).
Dokr´ç wszystkie Êruby.
3. Usuƒ pokryw´ z∏àcza i pokryw´ przewodu. Pod∏àcz 15-pinowà
koƒcówk´ mini D-SUB kabla sygna∏owego video do w∏aÊciwego
z∏àcza w tylnej cz´Êci monitora (R
y
sunek C.1). UmieÊç kabel
sygna∏owy video w zacisku C.
4. W∏ó˝ kabel audio do gniazda “AUDIO INPUT” w tylnej cz´Êci
monitora, a jego drugi koniec do zacisku “Audio out” komputera.
UmieÊç kabel audio w zacisku C (R
y
sunek D.1). Ponownie za∏ó˝
pokryw´ z∏àcza i pokryw´ przewodu.
5. S∏uchawki mo˝na pod∏àczyç do wyjÊcia “Headphones” znajdujàcego
si´ w czo∏owej cz´Êci obudowy monitora, oznaczonego “ ”
(R
y
sunekE.1). Po pod∏àczenie s∏uchawek dêwi´k z g∏oÊników
zostajewy∏àczony. S∏uchawki mo˝na kupiç w sklepie z artyku∏ami
elektronicznymi.
6. W razie u˝ywania kabla USB nale˝y pod∏àczyç wtyczk´ typu B do
górnego portu w tylnej cz´Êci monitora, a wtyczk´ typu A do dolnego
portu w komputerze (R
y
sunek F.1).
UWAGA: Nieprawid∏owe po∏àczenie przewodów mo˝e spowodowaç
nieprawid∏owe dzia∏anie monitora, uszkodzenie modu∏ów
wyÊwietlacza LCD i /lub skrócenie ˝ywotnoÊci modu∏ów.
7. Pod∏àczyç jeden koniec przewodu zasilajàcego do monitora Serii
MultiSync LCD, a drugi do gniazda zasilajàcego (R
y
sunek H.1).
Przewód zasilajàcy musi odpowiadaç normom bezpieczeƒstwa kraju,
wktórym jest u˝ywany. (Przewód typu H05VV-F powinien byç u˝ywany
wsz´dzie poza Wielkà Brytanià).
Polski-8
8. W∏àczyç monitor (R
y
sunek I.1) i komputer.
9. W celu ustawienia Twojego monitora MultiSync LCD nale˝y
wykorzystaç nast´pujàce funkcje OSM (menu ekranowego):
• Autoregulacja kontrastu
• Autoregulacja
Dok∏adny opis dzia∏ania poszczególnych funkcji menu ekranowego
znajduje si´ w rozdziale Uk∏ad Sterowania niniejszej Instrukcji Obs∏ugi.
UWAGA: W razie powstania jakichkolwiek problemów nale˝y
wpierwszej kolejnoÊci szukaç rozwiàzania wrozdziale
Usuwanie problemów niniejszej Instrukcji Obs∏ugi.
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
NEC MultiSync® LCD1525MBK Instrukcja obsługi
- Typ
- Instrukcja obsługi
- Niniejsza instrukcja jest również odpowiednia dla
w innych językach
Powiązane artykuły
-
NEC MultiSync® LCD1525XBK Instrukcja obsługi
-
NEC MultiSync® LCD1830BK Instrukcja obsługi
-
NEC MultiSync® LCD1525MBK Instrukcja obsługi
-
NEC MultiSync® LCD1850EBK Instrukcja obsługi
-
NEC MutliSync® LCD2080UX Instrukcja obsługi
-
NEC MultiSync® LCD1850XBK Instrukcja obsługi
-
NEC MultiSync® LCD1550VMBK Instrukcja obsługi
-
NEC AccuSync LCD71VM Instrukcja obsługi
-
-