Yamaha PSR-E253/YPT-255 Instrukcja obsługi

Kategoria
Pianina cyfrowe
Typ
Instrukcja obsługi
EN
Owners Manual
DIGITAL KEYBOARD
2
PSR-E253/YPT-255 Owner’s Manual
SPECIAL MESSAGE SECTION
This product utilizes batteries or an external power supply (adapter).
DO NOT connect this product to any power supply or adapter other
than one described in the manual, on the name plate, or specifically
recommended by Yamaha.
WARNING: Do not place this product in a position where anyone
could walk on, trip over, or roll anything over power or connecting
cords of any kind. The use of an extension cord is not recommended!
If you must use an extension cord, the minimum wire size for a 25’
cord (or less ) is 18 AWG. NOTE: The smaller the AWG number, the
larger the current handling capacity. For longer extension cords, con-
sult a local electrician.
This product should be used only with the components supplied or; a
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is
used, please observe all safety markings and instructions that accom-
pany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at
the time of printing. However, Yamaha reserves the right to change or
modify any of the specifications without notice or obligation to update
existing units.
This product, either alone or in combination with an amplifier and
headphones or speaker/s, may be capable of producing sound levels
that could cause permanent hearing loss. DO NOT operate for long
periods of time at a high volume level or at a level that is uncomfort-
able. If you experience any hearing loss or ringing in the ears, you
should consult an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before
damage occurs.
Some Yamaha products may have benches and / or accessory
mounting fixtures that are either supplied with the product or as
optional accessories. Some of these items are designed to be dealer
assembled or installed. Please make sure that benches are stable and
any optional fixtures (where applicable) are well secured BEFORE
using.
Benches supplied by Yamaha are designed for seating only. No other
uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how a
function or effect works (when the unit is operating as designed) are
not covered by the manufacturers warranty, and are therefore the
owners responsibility. Please study this manual carefully and consult
your dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and envi-
ronmentally friendly. We sincerely believe that our products and the
production methods used to produce them, meet these goals. In keep-
ing with both the letter and the spirit of the law, we want you to be
aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery which (if
applicable) is soldered in place. The average life span of this type of bat-
tery is approximately five years. When replacement becomes necessary,
contact a qualified service representative to perform the replacement.
This product may also use “household” type batteries. Some of these
may be rechargeable. Make sure that the battery being charged is a
rechargeable type and that the charger is intended for the battery being
charged.
When installing batteries, never mix old batteries with new ones, and
never mix different types of batteries. Batteries MUST be installed cor-
rectly. Mismatches or incorrect installation may result in overheating and
battery case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all bat-
teries away from children. Dispose of used batteries promptly and as
regulated by the laws in your area. Note: Check with any retailer of
household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some rea-
son its useful life is considered to be at an end, please observe all
local, state, and federal regulations that relate to the disposal of prod-
ucts that contain lead, batteries, plastics, etc. If your dealer is unable
to assist you, please contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The model
number, serial number, power requirements, etc., are located on this
plate. You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this manual
as a permanent record of your purchase.
Model
Serial No.
Purchase Date
PLEASE KEEP THIS MANUAL
92-BP (bottom)
For PSR-E253/YPT-255
3
PSR-E253/YPT-255 Owner’s Manual
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements. Modifica-
tions not expressly approved by Yamaha may void your author-
ity, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class
"B" digital devices. Compliance with these requirements pro-
vides a reasonable level of assurance that your use of this
product in a residential environment will not result in harmful
interference with other electronic devices. This equipment gen-
erates/uses radio frequencies and, if not installed and used
according to the instructions found in the users manual, may
cause interference harmful to the operation of other electronic
devices. Compliance with FCC regulations does not guarantee
that interference will not occur in all installations. If this product
is found to be the source of interference, which can be deter-
mined by turning the unit "OFF" and "ON", please try to elimi-
nate the problem by using one of the following measures:
Relocate either this product or the device that is being affected
by the interference.
Utilize power outlets that are on different branch (circuit breaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to distribute
this type of product. If you can not locate the appropriate
retailer, please contact Yamaha Corporation of America, Elec-
tronic Service Division, 6600 Orangethorpe Ave, Buena Park,
CA90620
The above statements apply ONLY to those products distrib-
uted by Yamaha Corporation of America or its subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
FCC INFORMATION (U.S.A.)
For AC adaptor and PSR-E253/YPT-255
4
PSR-E253/YPT-255 Owner’s Manual
Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magni-
tude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and main-
tenance (servicing) instructions in the liter-
ature accompanying the product.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accor-
dance with the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the
manufacturer.
12 Use only with the cart, stand, tri-
pod, bracket, or table specified by
the manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during
lightning storms or when unused for long periods of
time.
14 Refer all servicing to qualified service personnel. Ser-
vicing is required when the apparatus has been dam-
aged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has
been dropped.
(UL60065_03)
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
For AC adaptor
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
CAN ICES-3 (B)/NMB-3(B)
This applies only to products distributed by Yamaha Canada Music Ltd.
Ceci ne s’applique qu’aux produits distribués par Yamaha Canada Musique Ltée.
(can_b_01)
5
PSR-E253/YPT-255 Owner’s Manual
About the Manuals
In addition to this Owner’s Manual, the following Online materials (PDF files) are available.
Song Book (only in English, French, German and Spanish)
Contains music scores for the preset Songs (excluding the Demo Songs) of this instrument. After completing
the user registration at the website below, you can download this Song Book free of charge.
Yamaha Online Member
https://member.yamaha.com/myproduct/regist/
You will need the PRODUCT ID on the sheet (“Online Member Product Registration”) packaged with this
manual in order to fill out the User Registration form.
Included Accessories
• Owner’s Manual (this book)
• AC adaptor
*1
• Music rest
• Online Member Product Registration
*2
*1: May not be included depending on your particular locale. Check with your Yamaha dealer.
*2: The PRODUCT ID on the sheet will be needed when you fill out the User Registration form.
6
PSR-E253/YPT-255 Owner’s Manual
About the Manuals................................................ 5
Included Accessories............................................ 5
Setting Up
Panel Controls and Terminals 10
Setting Up 12
Power Requirements .......................................... 12
Using the music rest ........................................... 13
Connecting Headphones (sold separately) or
External Audio Equipment ............................. 13
Connecting a Footswitch to the [SUSTAIN] jack
.. 13
Turning the Power On/Off................................... 13
Auto Power Off Function .................................... 14
Setting the Volume ............................................. 14
Selecting an EQ Setting for the Best Sound....... 14
Display Items and Basic Operations 15
Display Items ...................................................... 15
Basic Operations ................................................ 15
Reference
Playing a Variety of Instrument Voices 16
Selecting a Voice................................................ 16
Fun Sounds ........................................................ 16
Playing the “Grand Piano” .................................. 16
Using the Metronome ......................................... 17
Playing with enhanced, more spacious sound
(Ultra-Wide Stereo)........................................ 17
Applying Effects to the Sound ............................ 17
Playing Styles 18
Style Variations—Sections ................................. 19
Changing the Tempo.......................................... 19
Chord Types for Style Playback ......................... 20
Looking Up Chords Using the Chord Dictionary. 21
Playing the keyboard with two persons
(Duo mode) 22
Playing Songs 23
Listening to a Demo Song................................... 23
Selecting and Playing Back a Song ....................23
BGM Playback ....................................................23
Song Fast Forward, Fast Reverse, and Pause ...24
Changing the Melody Voice ................................24
A-B Repeat..........................................................24
Turning Each Part On/Off.................................... 25
Hearing and Experiencing the Sound of the
Chords (Chord Study) 26
Hear and experience a sound of a single chord..26
Hear and experience basic chord progressions..26
Using the Song Lesson Feature 27
Listening, Timing and Waiting .............................27
Practicing with Song Lesson ...............................27
Playing an External Audio Device with the
Built-in Speakers 28
Recording Your Performance
(Phrase Recording) 29
The Functions 30
Backup and Initialization 32
Backup Parameters.............................................32
Initialization .........................................................32
Appendix
Troubleshooting.............................................33
Voice List ........................................................ 34
Drum Kit List ..................................................36
Song List......................................................... 39
Style List ......................................................... 40
Effect Type List .............................................. 41
Specifications................................................. 42
Index................................................................ 43
Thank you for purchasing this Yamaha Digital Keyboard!
We recommend that you read this manual carefully so that you can fully take advantage of the
advanced and convenient functions of the instrument.
We also recommend that you keep this manual in a safe and handy place for future reference.
Contents
7
PSR-E253/YPT-255 Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe and handy place for future reference.
For AC adaptor
WARNING
This AC adaptor is designed for use with only Yamaha electronic
instruments. Do not use for any other purpose.
Indoor use only. Do not use in any wet environments.
CAUTION
When setting up, make sure that the AC outlet is easily accessible.
If some trouble or malfunction occurs, immediately turn off the
power switch of the instrument and disconnect the AC adaptor
from the outlet. When the AC adaptor is connected to the AC outlet,
keep in mind that electricity is flowing at the minimum level, even if
the power switch is turned off. When you are not using the
instrument for a long time, make sure to unplug the power cord
from the wall AC outlet.
For PSR-E253/YPT-255
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or
even death from electrical shock, short-circuiting, damages, fire or other hazards. These
precautions include, but are not limited to, the following:
Do not place the power cord near heat sources such as heaters or
radiators. Also, do not excessively bend or otherwise damage the
cord, or place heavy objects on it.
Only use the voltage specified as correct for the instrument. The
required voltage is printed on the name plate of the instrument.
Use the specified adaptor (page 42) only. Using the wrong adaptor
can result in damage to the instrument or overheating.
Check the electric plug periodically and remove any dirt or dust
which may have accumulated on it.
This instrument contains no user-serviceable parts. Do not open
the instrument or attempt to disassemble or modify the internal
components in any way. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified
Yamaha service personnel.
Do not expose the instrument to rain, use it near water or in damp
or wet conditions, or place on it any containers (such as vases,
bottles or glasses) containing liquids which might spill into any
openings. If any liquid such as water seeps into the instrument,
turn off the power immediately and unplug the power cord from the
AC outlet. Then have the instrument inspected by qualified Yamaha
service personnel.
Never insert or remove an electric plug with wet hands.
Power supply/AC adaptor
Do not open
Water warning
DMI-5 1/3
8
PSR-E253/YPT-255 Owner’s Manual
Do not put burning items, such as candles, on the unit. A burning
item may fall over and cause a fire.
Follow the precautions below. Failure to do so might result in
explosion, fire, overheating or battery fluid leakage.
- Do not tamper with or disassemble batteries.
- Do not dispose of batteries in fire.
- Do not attempt to recharge batteries that are not designed to be
charged.
- Keep the batteries separate from metallic objects such as
necklaces, hairpins, coins, and keys.
- Use the specified battery type (page 42) only.
- Use new batteries, all of which are the same type, same model,
and made by the same manufacturer.
- Always make sure all batteries are inserted in conformity with the
+/- polarity markings.
- When the batteries run out, or if the instrument is not to be used
for a long time, remove the batteries from the instrument.
- When using Ni-MH batteries, follow the instructions that came
with the batteries. Use only the specified charger device when
charging.
Keep batteries away from small children who might accidentally
swallow them.
If the batteries do leak, avoid contact with the leaked fluid. If the
battery fluid should come in contact with your eyes, mouth, or
skin, wash immediately with water and consult a doctor. Battery
fluid is corrosive and may possibly cause loss of sight or chemical
burns.
When one of the following problems occur, immediately turn off the
power switch and disconnect the electric plug from the outlet. (If
you are using batteries, remove all batteries from the instrument.)
Then have the device inspected by Yamaha service personnel.
- The power cord or plug becomes frayed or damaged.
- It emits unusual smells or smoke.
- Some object has been dropped into the instrument.
- There is a sudden loss of sound during use of the instrument.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to
you or others, or damage to the instrument or other property. These precautions include, but
are not limited to, the following:
Do not connect the instrument to an electrical outlet using a
multiple-connector. Doing so can result in lower sound quality, or
possibly cause overheating in the outlet.
When removing the electric plug from the instrument or an outlet,
always hold the plug itself and not the cord. Pulling by the cord
can damage it.
Remove the electric plug from the outlet when the instrument is not
to be used for extended periods of time, or during electrical storms.
Do not place the instrument in an unstable position where it might
accidentally fall over.
Before moving the instrument, remove all connected cables, to
prevent damage to the cables or injury to anyone who might trip
over them.
When setting up the product, make sure that the AC outlet you are
using is easily accessible. If some trouble or malfunction occurs,
immediately turn off the power switch and disconnect the plug
from the outlet. Even when the power switch is turned off,
electricity is still flowing to the product at the minimum level.
When you are not using the product for a long time, make sure to
unplug the power cord from the wall AC outlet.
Use only the stand specified for the instrument. When attaching it,
use the provided screws only. Failure to do so could cause damage
to the internal components or result in the instrument falling over.
Before connecting the instrument to other electronic components,
turn off the power for all components. Before turning the power on
or off for all components, set all volume levels to minimum.
Be sure to set the volumes of all components at their minimum
levels and gradually raise the volume controls while playing the
instrument to set the desired listening level.
Fire warning
Battery
If you notice any abnormality
Power supply/AC adaptor
Location
Connections
DMI-5 2/3
9
PSR-E253/YPT-255 Owner’s Manual
Do not insert a finger or hand in any gaps on the instrument.
Never insert or drop paper, metallic, or other objects into the gaps
on the panel or keyboard. This could cause physical injury to you
or others, damage to the instrument or other property, or
operational failure.
Do not rest your weight on, or place heavy objects on the
instrument, and do not use excessive force on the buttons,
switches or connectors.
Do not use the instrument/device or headphones for a long period
of time at a high or uncomfortable volume level, since this can
cause permanent hearing loss. If you experience any hearing loss
or ringing in the ears, consult a physician.
Always turn the power off when the instrument is not in use.
Even when the [ ] (Standby/On) switch is in standby status,
electricity is still flowing to the instrument at the minimum level.
When you are not using the instrument for a long time, make sure you
unplug the power cord from the wall AC outlet.
Make sure to discard used batteries according to local regulations.
NOTICE
To avoid the possibility of malfunction/ damage
to the product, damage to data, or damage to
other property, follow the notices below.
Handling
Do not use the instrument in the vicinity of a TV, radio,
stereo equipment, mobile phone, or other electric devices.
Otherwise, the instrument, TV, or radio may generate noise.
When you use the instrument along with an application on
your iPhone, iPad or iPod touch, we recommend that you
set “Airplane Mode” to “ON” on that device in order to
avoid noise caused by communication.
Do not expose the instrument to excessive dust or
vibrations, or extreme cold or heat (such as in direct
sunlight, near a heater, or in a car during the day) to
prevent the possibility of panel disfiguration, damage to
the internal components or unstable operation. (Verified
operating temperature range: 5° – 40°C, or 41° – 104°F.)
Do not place vinyl, plastic or rubber objects on the
instrument, since this might discolor the panel or
keyboard.
Maintenance
When cleaning the instrument, use a soft cloth. Do not use
paint thinners, solvents, alcohol, cleaning fluids, or
chemical-impregnated wiping cloths.
Saving data
Some of the data of this instrument (page 32) are retained
when the power is turned off. However, the saved data may
be lost due to some failure, an operation mistake, etc.
Information
About copyrights
Copying of the commercially available musical data
including but not limited to MIDI data and/or audio data is
strictly prohibited except for your personal use.
This product incorporates and bundles contents in which
Yamaha owns copyrights or with respect to which Yamaha has
license to use others’ copyrights. Due to copyright laws and
other relevant laws, you are NOT allowed to distribute media
in which these contents are saved or recorded and remain
virtually the same or very similar to those in the product.
* The contents described above include a computer
program, Accompaniment Style data, MIDI data, WAVE
data, voice recording data, a score, score data, etc.
* You are allowed to distribute medium in which your
performance or music production using these contents is
recorded, and the permission of Yamaha Corporation is
not required in such cases.
About functions/data bundled with the
instrument
Some of the preset songs have been edited for length or
arrangement, and may not be exactly the same as the original.
About this manual
The illustrations and LCD screens as shown in this manual
are for instructional purposes only, and may appear
somewhat different from those on your instrument.
iPhone, iPad and iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
The company names and product names in this manual are
the trademarks or registered trademarks of their respective
companies.
Handling caution
Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.
DMI-5 3/3
The model number, serial number, power require-
ments, etc., may be found on or near the name plate,
which is at the bottom of the unit. You should note this
serial number in the space provided below and retain
this manual as a permanent record of your purchase
to aid identification in the event of theft.
Model No.
Serial No.
(bottom_en_01)
10
PSR-E253/YPT-255 Owner’s Manual
Panel Controls and Terminals
Setting Up
q
w
e
t
r
i
o
!0
y
u
!1 !2 !3 !4 !5
!6
!7
!8
!9
@1 @2 @3
@4
@0
C1 C2 C3 C4 C5 C6
Song List
(page 39)
Style List
(page 40)
Display
(page 15)
Front Panel
Voice List
(page 34)
11
PSR-E253/YPT-255 Owner’s Manual
Panel Controls and Terminals
q [ ] (Standby/On) switch..................... page 13
w [MASTER VOLUME] dial ...................... page 14
e [DEMO] button......................................page 23
r [METRONOME] button.........................page 17
t [TEMPO/TAP] button............................page 19
y [PHRASE REC] button .........................page 29
u [1 LISTEN & LEARN] button................page 27
i [2 TIMING] button.................................page 27
o [3 WAITING] button ..............................page 27
!0 LESSON PART
[L] button ..............................................page 27
[R] button..............................................page 27
!1 [A-B REPEAT] button ...........................page 24
!2 [REW] button ........................................page 24
!3 [FF] button ............................................page 24
!4 [PAUSE] button.....................................page 24
!1 [ACMP ON/OFF] button .......................page 18
!2 [INTRO/ENDING/rit.] button.................page 19
!3 [MAIN/AUTO FILL] button....................page 19
!4 [SYNC START] button .......................... page 18
!5 [START/STOP] button ..........................page 23
!6 [SONG] button ......................................page 23
!7 [VOICE] button ..................................... page 16
!8 [STYLE] button.....................................page 18
!9 Number buttons [0]–[9], [+], [-] ........... page 15
@0 [PORTABLE GRAND] button ............... page 16
@1 [ULTRA-WIDE STEREO] button .......... page 17
@2 [SOUND EFFECT] button ....................page 16
@3 [FUNCTION] button
..............................page 30
@4 Dr
um illustrations for the Drum Kit.... page 16
Each of these indicates the drum or percussion instrument
assigned to the corresponding key for “Standard Kit 1.
In the Song mode
In the Style mode
@5 @6
@7
@8
Rear Panel
@5 [AUX IN] jack ........................................page 28
@6 [PHONES/OUTPUT] jack ..................... page 13
@7 [SUSTAIN] jack..................................... page 13
@8 DC IN jack............................................. page 12
The “Press & Hold” Symbol
Buttons having this indication can be used to call
up an alternate function when the relevant button
is pressed and held. Hold down this button until
the function is called up.
Keyboard
Since this keyboard does not have touch response, the
level of the sound does not change in response to your
playing strength. Therefore, your performance may not
sound correctly as in the preset Songs.
12
PSR-E253/YPT-255 Owner’s Manual
Setting Up
Power Requirements
Although the instrument will run either from an AC
adaptor or batteries, Yamaha recommends use of an
AC adaptor whenever possible. An AC adaptor is
more environmentally friendly than batteries and
does not deplete resources.
Using an AC adaptor
1 Make sure that the power of the instrument is off
(the backlight display is off).
2 Connect the AC adaptor to the DC IN jack (power
supply jack).
3 Plug the AC adaptor into an AC outlet.
Using Batteries
This instrument requires sixAA” size, Alkaline (LR6)/
Manganese (R6) batteries, or rechargeable nickel-
metal hydride batteries (rechargeable Ni-MH batter-
ies). The Alkaline batteries or rechargeable Ni-MH
batteries are recommended for this instrument, since
other types may result in poorer battery performance.
Installing the batteries
1 Make sure that the power of the instrument is off.
2 Open the battery compartment cover located on
the instrument’s bottom panel.
3 Insert the six new batteries, being careful to follow
the polarity markings on the inside of the compart-
ment.
4 Replace the compartment cover, making sure that
it locks firmly in place.
When battery power becomes too low for proper
operation, the volume may be reduced, the sound
may be distorted, and other problems may occur.
When this happens, make sure to replace all batter-
ies with new ones or already-recharged ones.
• Use the specified adaptor (page 42) only. Using the
wrong adaptor can result in damage to the instrument
or overheating.
• See “For the AC adaptor with a Removable Plug” (page
46).
• When setting up the product, make sure that the AC
outlet you are using is easily accessible. If some trou-
ble or malfunction occurs, immediately turn off the
power switch and disconnect the plug from the outlet.
• After turning off the power, follow this procedure in reverse
order to disconnect the AC adaptor.
• Power will be automatically drawn from the AC adaptor if an
AC adaptor is connected while batteries are installed in the
instrument.
AC outlet
AC
adaptor
3
2
DC IN jack
(page 11)
NOTE
Connecting or disconnecting the AC adaptor with batteries
installed may turn the power off, resulting in loss of data
being recorded or transferred at the time.
• Change the setting of the instrument according to the kind
of battery you are using (Battery Type; page 42).
• This instrument cannot charge the batteries. Use only the
specified charger device when charging.
• Power will be automatically drawn from the AC adaptor if an
AC adaptor is connected while batteries are installed in the
instrument.
NOTE
13
PSR-E253/YPT-255 Owner’s Manual
Setting Up
Setting the battery type
After installing new batteries and turning the power
on, make sure to set the Battery Type appropriately
(rechargeable or not) via Function number 023 (page
31).
Using the music rest
Connecting Headphones (sold
separately) or External Audio
Equipment
A pair of stereo headphones with a 1/4” stereo phone
plug can be plugged in here for convenient monitor-
ing. The speakers are automatically shut off when a
plug is inserted into this jack.
The [PHONES/OUTPUT] jack also functions as an
external output. You can connect the [PHONES/
OUTPUT] jack to a computer, a keyboard amplifier,
stereo system, mixer, recorder, or other line-level
audio device to send the instrument’s output signal to
that device.
Connecting a Footswitch to the
[SUSTAIN] jack
You can produce a natural sustain as you play by
pressing a Footswitch (FC5/FC4A; sold separately)
plugged into the [SUSTAIN] jack.
Turning the Power On/Off
1 Turn down the [MASTER VOLUME] dial to “MIN.
2 Press the [ ] (Standby/On) switch to turn on the
power. While playing the keyboard, adjust the
[MASTER VOLUME] dial. To turn off the power,
press the [ ] (Standby/On) switch again for a
second.
• Failure to set the Battery Type may shorten the amount of
the battery life. Make sure to set the Battery Type correctly.
Do not use the instrument/device or headphones for a long
period of time at a high or uncomfortable volume level,
since this can cause permanent hearing loss. If you experi-
ence any hearing loss or ringing in the ears, consult a phy-
sician.
• Before connecting the instrument to other electronic com-
ponents, set all volume levels to the minimum, then turn
off the power for all components.
Insert the music rest
into the slots as shown.
1/4” stereo
phone plug
• When the instruments sound is output to an external
device, first turn on the power to the instrument, then to
the external device. Reverse this order when you turn the
power off.
• Make sure that the footswitch plug is properly connected to
the [SUSTAIN] jack before turning on the power.
• Do not press the footswitch while turning the power on. Doing
this changes the recognized polarity of the footswitch, result-
ing in reversed footswitch operation.
• The sustain function does not affect style (automatic accom-
paniment; page 18).
• When using an AC adaptor, even when the power is off, a
small amount of electricity is still being consumed by the
instrument. When you are not using the instrument for a
long time, make sure to unplug the AC adaptor from the
wall AC outlet.
NOTE
14
PSR-E253/YPT-255 Owner’s Manual
Setting Up
Auto Power Off Function
To prevent unnecessary power consumption, this
instrument features an Auto Power Off function that
automatically turns the power off if the instrument is
not operated for a specified period of time. The
amount of time that will elapse before the power is
automatically turned off is set by default to 30 minutes.
To set the time that elapses before Auto
Power Off is executed:
Press the [FUNCTION] button several times until
AutoOff” (Function 022; page 31) appears, then use
the [+] or [-] button to select the desired value.
Settings: OFF, 5, 10, 15, 30, 60, 120 (minutes)
Default value: 30 (minutes)
To disable the Auto Power Off function:
Turn off the power, then press the [ ] (Standby/On)
switch to turn on the power while holding down the
lowest key. The Auto Power Off function also can be
disabled by selecting Off in Function number 022
(page 31).
Setting the Volume
When you start playing, use the [MASTER VOLUME]
dial to adjust the volume of the entire keyboard
sound.
Selecting an EQ Setting for the
Best Sound
Six different master equalizer (EQ) settings give you
the best possible sound when listening through differ-
ent reproduction systems—the instrument’s internal
speakers, headphones, or an external speaker sys-
tem.
1
Hold down the [ULTRA-WIDE STEREO]
button for longer than a second to call
up “013 MasterEQ” (Function 013; page
31).
“MasterEQ” is shown in the display for a few sec-
onds, and the current Master EQ type appears.
2
Use the [+] or [-] button to select the
desired Master EQ type.
Master EQ types
Generally, the data and settings are maintained even when the
power is turned off. For details, see page 32.
• Depending on the instrument status, the power may not
turn off automatically, even after the elapse of the specified
period of time. Always turn off the power manually when
the instrument is not in use.
• When the instrument is not operated for a specified period
of time while connected to an external device such as an
amplifier, speaker or computer, make sure to follow the
instructions in the Owner’s Manual to turn off the power to
the instrument and the connected devices, in order to pro-
tect the devices from damage. If you do not want the
power to turn off automatically when a device is con-
nected, disable Auto Power Off.
• Do not use this instrument at a high volume level for a long
period of time, or your hearing may be damaged.
NOTE
1 Speaker
Optimum for listening via the instru-
ment’s built-in speakers.
2 Headphone
Optimum for headphones, or for listen-
ing via external speakers.
3 Boost Features more powerful sound.
4 Piano Optimum for piano solo performance.
5Bright
Lowers the mid range for a brighter
sound.
6 Mild
Lowers the high range for a softer
sound.
013
013
MasterEQ
Speaker
1
Current Master
EQ type
Hold for longer
than a second.
15
PSR-E253/YPT-255 Owner’s Manual
Display Items and Basic Operations
Display Items
Basic Operations
Before operating the instrument, it may be helpful to familiarize yourself with the basic controls below that are
used to select items and change values.
Number buttons
Use the Number buttons to directly enter an item or
value. For numbers that start with one or two zeroes,
the first zeroes can be omitted.
[-] and [+] buttons
Press the [+] button briefly to increase the value by 1, or
press the [-] button briefly to decrease the value by 1.
Press and hold either button to continuously increase or
decrease the value in the corresponding direction.
001
003
GrandPno
These indicate the operating
condition of the instrument.
Song/Voice/Style
Normally this indicates the notes you
play. When the Song Lesson function
is used, this indicates the current
notes and chord of playback. When
the Dictionary function (page 21) is
used, this indicates the notes of the
chord you specify.
Notation
Any notes occurring below or above
the staff are indicated by “8va.
For a few specific chords, not all notes
may be shown, due to space limita-
tions in the display.
NOTE
Each indication is shown when the
corresponding function is turned on.
...
Ultra-Wide Stereo
(page 17)
...
Auto Accompaniment
(page 18)
... Indicates that a Dual
Voice (No.309–323) is
selected.
... Duo (
page 22
)
On/Off status
Indicates the chord which is played on the Auto
Accompaniment range (page 18) of the keyboard, or
specified via Song playback.
Normally indicates the current measure number
of current Style or Song. When the [FUNCTION]
button (page 30) is in use, this indicates the
Function number.
Indicates notes currently being played. Indicates the melody and
chord notes of a Song when the Song lesson function is in use.
Also indicates the notes of a chord—either when playing a chord or
when using the Dictionary function (page 21).
Chord
Measure or Function
Keyboard Display
003
023
Indicates the on/off status of Song playback or
target Track of Song recording (page 25).
Lit: Track contains data
Unlit: Track is muted or contains no data
Indicates the current beat of playback.
Song Track status
Beat
Press number buttons
[0], [0], [3], or simply
press [3].
Example: Selecting Voice 003, Bright Piano.
Press briefly to increase.
Press briefly to decrease.
PSR-E253/YPT-255 Owner’s Manual
16
Playing a Variety of Instrument Voices
In addition to piano, organ, and other “standard” keyboard instruments, this instru-
ment has a large range of Voices that includes guitar, bass, strings, sax, trumpet,
drums and percussion, and even sound effects—giving you a wide variety of musical
sounds.
1
Press the [VOICE] button.
The Voice number and name will be shown.
2
Use the number buttons [0]–[9], [+], [-]
buttons to select the desired Voice.
Refer to the Voice List on page 34.
3
Play the keyboard.
Preset Voice Types
You’ll be able to play various sound effects from the
keyboard: barking, braying, yelling, and much more.
Press the [SOUND EFFECT] button.
Try out each key and enjoy the sounds. Don’t forget
the black keys! After trying out these sounds, press
the [PORTABLE GRAND] button to reset the instru-
ment Voice to the default setting of Voice “Grand
Piano.” For details on the sound effects assigned to
each key, refer to Drum Kit List (Voice No.385) on
page 36.
When you want to reset various settings to default
and simply play a Piano sound, press the [PORTA-
BLE GRAND] button.
The Voice “001 Grand Piano” will automatically be
selected as the Voice.
Selecting a Voice
001–372 Instrument Voices (including sound effects).
373–385
(Drum Kit)
Various drum and percussion sounds are
assigned to individual keys, from which they
can be played. Details on the instruments and
key assignments of each Drum Kit can be
found in the Drum Kit List on page 36.
000
One Touch Setting
The One Touch Setting feature automatically
selects the most suitable Voice when you
select a Style or Song (excepting the Song
inputted from the [AUX IN] jack). Simply select
Voice number “000” to activate this feature.
GrandPno
001
Voice nam e
The Voice shown here
becomes the Voice for
the instrument.
Voice number
Appears after the
[VOICE] button is
pressed.
Flute
167
Select 167 Flute
Fun Sounds
Playing the “Grand Piano”
Reference
Playing a Variety of Instrument Voices
PSR-E253/YPT-255 Owner’s Manual
17
The instrument features a built-in metronome (a
device that keeps an accurate tempo), convenient for
practicing.
1
Press the [METRONOME] button to start
the metronome.
2
Press the [METRONOME] button again
to stop the metronome.
To change the tempo:
Press the [TEMPO/TAP] button to call up the Tempo
value, then use the number buttons [0]–[9], [+], [-].
Press the [+] and [-] buttons simultaneously to
instantly reset the value to the default tempo.
To set the Time Signature:
Press and hold the [METRONOME] button to call up
“TimeSigN” (Functions 016; page 31), then use the
Number buttons.
To set the Metronome Volume:
This can be set via Function number 017 (page 31).
You can play the keyboard with a spacious, wider
sound effect that gives you the sensation of hearing
the sound outside of the speakers by turning on the
Ultra-Wide Stereo effect.
1
Press the [ULTRA-WIDE STEREO] but-
ton to turn it on.
The sound will expand around you—as if the
speaker position is outside of the instrument.
2
Press the [ULTRA-WIDE STEREO] but-
ton again to turn it off.
To select the Ultra-Wide Stereo type:
Press the [FUNCTION] button several times to call up
“Wide” (Function 014;
page 31
), then use the Number
buttons.
This instrument can apply various Effects as listed
below to the instrument’s sound.
Reverb
Adds the ambience of a club or concert hall to the
sound. Although the best-suited Reverb type is called
up by selecting a Song or Style, you can select another
one via Function number 009 (
page 31
). You can also
set the Reverb depth via Function number 010 (
page
31
).
Chorus
Makes the Voice sound richer, warmer and more
spacious. Although the best-suited Chorus type is
called up by selecting a Song or Style, you can select
another one via Function number 011 (
page 31
).
Panel Sustain
By turning on the Sustain parameter of Function
number 012 (
page 31
), you can add a fixed, auto-
matic sustain to the keyboard Voices. Sustain can
also be applied as desired with the footswitch (sold
separately; page 13).
Using the Metronome
Playing with enhanced, more spa-
cious sound (Ultra-Wide Stereo)
Tempo
090
Current Tempo value
GrandPno
001
Appears when Ultra-
Wide Stereo is on.
Applying Effects to the Sound
• Even if you turn on Panel Sustain, there are some Voices to
which sustain is not applied.
NOTE
PSR-E253/YPT-255 Owner’s Manual
18
Playing Styles
This instrument includes the Auto Accompaniment feature that plays appropriate
“Styles” (rhythm + bass + chord accompaniment). You can select from a huge variety of
Styles covering a wide range of musical genres.
1
Press the [STYLE] button, then use the
number buttons [0]–[9], [+], [-] to select
the desired Style.
The Style List is provided on the front panel, or in
the Style List (page 40).
2
Press the [ACMP ON/OFF] button to turn
on the Auto Accompaniment.
With this operation, the area of the keyboard to
the left of the Split Point (054: F#2) becomes the
Auto Accompaniment range” and is used only for
specifying the chords.
The highest key for the Auto Accompaniment
range is referred to as the “Split Point,” which can
be changed from the default of F#2 via Function
number 005 (page 30).
3
Press the [SYNC START] button to turn
Synchro Start on.
4
Play a chord in the Auto Accompani-
ment range to start playback.
Play a melody with the right hand and chords with
the left hand.
For information about chords, refer to “Chord
Types for Style Playback” (page 20) or use the
Chord Dictionary function (page 21).
5
Press the [START/STOP] button to stop
playback.
You can add intro, ending and rhythm variations
to Style playback by using “Sections.” For details,
refer to page 19.
Adjusting the Style Volume
To adjust the volume balance between Style play-
back and keyboard, you can adjust the Style Volume.
This can be set via Function number 001 (page 30).
8BtModrn
001
Style Name
Style Number
This icon appears when the [STYLE]
button is pressed.
LoveSong
018
This icon appears when auto-
matic accompaniment is on.
Split Point ... default setting: 054 (F#2)
Auto
Accompaniment
range
036
(C1)
048
(C2)
060
(C3)
072
(C4)
084
(C5)
096
(C6)
To play back the rhythm part only
If you press the [START/STOP] button (without pressing
the [ACMP ON/OFF] button in step 2), only the rhythm
part can be played back, and you can play a melody
performance using the entire keyboard range.
LoveSong
018
Flashes when sync start is on.
Split Point
• Since the Pianist category Styles (093–100) have no
rhythm parts, no sound will be produced if you start
rhythm-only playback. When playing these Styles, make
sure to carry out Steps 2–4 on this page.
NOTE
Playing Styles
PSR-E253/YPT-255 Owner’s Manual
19
Each Style consists of “Sections” that allow you to
vary the arrangement of the accompaniment to
match the song you are playing. These instructions
cover a typical example for using the Sections.
1–3
Same as Steps 1–3 in page 18.
4
Press the [MAIN/AUTO FILL] button to
select Main A or Main B.
5
Press the [INTRO/ENDING/rit.] button.
Now, youre ready to start Style playback from the
Intro section.
6
Play a chord with your left hand to start
playback of the Intro.
For this example, play a C major chord (as shown
below). For information on how to enter chords,
see “Chord Types for Style Playback” on page 20.
7
After the Intro finishes, play the key-
board according to the progression of
the Song you are playing.
Play chords with your left hand while playing mel-
odies with your right hand, and press the [MAIN/
AUTO FILL] button as necessary. The Section will
change to Fill-in then Main A or B.
8
Press the [INTRO/ENDING/rit.] button.
The Section switches to the Ending. When the
Ending is finished, Style playback stops automati-
cally. You can have the Ending gradually slow
down (ritardando) by pressing the [INTRO/END-
ING/rit.] button again while the Ending is playing
back.
Press the [TEMPO/TAP] button to call up the Tempo
value, then use the [-] and [+] buttons to adjust the
Te mp o va lue .
Press the [+] and [-] buttons simultaneously to reset
the value to the default tempo of the current Style or
Song.
Using the Tap function
While a Song or Style is playing back, press the
[TEMPO/TAP] button just twice at the desired tempo
to change the tempo. While Song or Style playback is
stopped, tap the [TEMPO/TAP] button several times
to start playback at the tapped tempo—four times for
a 4-beat Song or Style or three times for a 3-beat
Song or Style.
Style Variations—Sections
MAIN A
Current Section
INTRO≥A
Split Point ... default setting: 054 (F#2)
Auto Accompa-
niment range
Changing the Tempo
FILL A≥B
ENDING
Tempo
090
Current Tempo value
Playing Styles
PSR-E253/YPT-255 Owner’s Manual
20
For users who are new to chords, this chart conveniently shows how to play common chords in the Auto Accom-
paniment range of the keyboard. Since there are many useful chords and many different ways to use them musi-
cally, refer to commercially available chord books for further details.
indicates the root note.
• Inversions can be used as well as in “root” position—with the following exceptions:
m7, m7
b
5, 6, m6, sus4, aug, dim7, 7
b
5, 6(9), sus2
• Inversion of the 7sus4 and m7(11) chords are not recognized if the notes are omitted.
• Sus2 chords are indicated by the root name only.
• When playing a chord which cannot be recognized by this instrument, nothing is shown on the display. In such a case, only the rhythm
and bass parts will be played.
Chord Types for Style Playback
Major Minor Seventh Minor Seventh Major Seventh
C
Cm
7
C
Cm
7
CM
7
D
Dm
7
D
Dm
7
DM
7
E
Em
7
E
Em
7
EM
7
C
F
Fm
7
F
Fm
7
FM
7
G
Gm
7
G
Gm
7
GM
7
A
Am
7
A
Am
7
AM
7
B
Bm
7
B
Bm
7
BM
7
Easy Chords
This method lets you easily play chords in the accompaniment range of the keyboard using only one, two,
or three fingers.
For rootC
To play a major chord
Press the root note ()
of the chord.
To play a minor chord
Press the root note
together with the nearest
black key to the left of it.
To play a seventh chord
Press the root note
together with the nearest
white key to the left of it.
To play a minor seventh chord
Press the root note together
with the nearest white and
black keys to the left of it (three
keys altogether).
C
Cm
C
7
Cm
7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Yamaha PSR-E253/YPT-255 Instrukcja obsługi

Kategoria
Pianina cyfrowe
Typ
Instrukcja obsługi