AMP Lighting AHS-7004-B-BZ Instrukcja instalacji

Marka
AMP Lighting
Model
AHS-7004-B-BZ
Typ
Instrukcja instalacji

Niniejsza instrukcja jest również odpowiednia dla

INSTALLATION & MAINTENANCE GUIDE
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com
AMP
®
Low Voltage Landscape Lighting
AMP
®
6” DescentPro Hardscape Light
AHS-7004-4-B-BZ
AMP
®
DescentPro Hardscape Light
AHS-7004-4-B-BZ
INSTALLATION & MAINTENANCE GUIDE
www.amplighting.com
–2–
[email protected] • 813.978.3900
Product Dimensions
–3–
Remove Lens
1
Important Safety Instructions: Read Before Installation
!
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situations.
1. Make sure the power is turned OFF before installing or servicing this
luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)
or more from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply
(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with UL listed wire connectors that are
suitable for outdoor use.
5. Position the low voltage wire and wire connector so that it is located
within 6 inches (15.2 cm) from a building structure, a luminaire or
tting.
6. The main low voltage cable is intended for shallow burial - less than 6
inches (152 mm).
7. If additional lengths of low voltage cable are required, please contact
www.amplighting.com or call 1-813-978-3900.
Important Safety Instructions
!
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before replacing lamp.
2. Lamp gets HOT quickly! Contact only switch/plug when turning on.
3. Do not touch the hot lens, guard or enclosure.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may dam-
age lamp.
6. Do not operate the luminaire tting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
Package Contents
A. (1) Luminaire
B. (4) Lock Screws
8”
3 5/8”
1 1/8”
Using a screwdriver, loosen the screws
and remove them from the lens of the
luminaire.
Luminaire
Luminaire
Lens
Screw
Install Bulb
2
Insert the bulb with the correct wattage
and type marked on luminaire label.
CAUTION: Do not exceed maximum
wattage marked on luminaire label.
NOTE: DO NOT touch bulb with bare
hands. Use soft cloth to handle bulb.
Bulb
Socket
INSTALLATION & MAINTENANCE GUIDE
–4–
www.amplighting.com
–4–
Wire Connections
3
Install Lens
3
[email protected] • 813.978.3900
INSTALLATION & MAINTENANCE GUIDE
AMP
®
DescentPro Hardscape Light
AHS-7004-4-B-BZ
AMP
®
DescentPro Hardscape Light
AHS-7004-4-B-BZ
Place the lens back onto
the luminaire and secure
with the removed screws
on Step 1.
Luminaire
Lens
Screw
Install Lens
4
Luminaire
Lock Screw
Wall Anchors
Attach the luminaire onto your
desired location and secure with the
lock screws.
Note: Wall anchors are required for
certain installation conditions (brick
wall, concrete call, etc.). Place a
mark on the wall for the wall anchors
using the holes on the base. Remove
the base and drill proper holes on
the wall and then insert the wall
anchors.
Strip both leads from the luminaire
pigtail. Using two wire connectors
(sold separately), connect the leads
from the luminaire to the main low
voltage supply cable leads.
Luminaire
Wire Connector
Main Low Voltage Supply Cable
Pigtail
Install/Replace Bulb
Loosen the screws on the lens, remove the lens to expose the bulb and
replace it with correct wattage and type marked on the xture label. Then
reinstall the lens to the xture.
IMPORTANT: Bulbs must be protected from moisture and dust at all times.
Always reinstall the lens when removed.
–6–
www.amplighting.com
–6–
[email protected] • 813.978.3900
–7–
IS-AHS-7004-B-BZ-ver1.pdf
Specications and product details subject to change without notice.
© Copyright 2019, AMP
®
Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • 813.978.3900
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

AMP Lighting AHS-7004-B-BZ Instrukcja instalacji

Marka
AMP Lighting
Model
AHS-7004-B-BZ
Typ
Instrukcja instalacji
Niniejsza instrukcja jest również odpowiednia dla
Pobierz PDF
raport

w innych językach

Powiązane artykuły