LD Systems DDQ 10 Instrukcja obsługi

Typ
Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘ USO
LD DDQ SERIES
DSP-CONTROLLED 2-WAY ACTIVE SPEAKER
LDDDQ10 / LDDDQ12
2
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS
ESpAñoLpoLSKIITALIANo
Thank you for choosing LD Systems!
We have designed this product to operate reliably over many years. Therefore LD Systems guarantees for high
quality products with its name and many years of experience as a producer.
Please, take a few moments to read these instructions carefully, as we want you to enjoy your new LD Systems
products quickly and to the fullest.
For information about LD Systems check out our website WWW.LD-SYSTEMS.COM
Introduction
Their outstanding performance of the LD Systems DDQ series is the result of a precise design and perfect
features that deserve top marks across the board.
The DDQ systems are loaded with Faital Pro woofers and BMS tweeters. They are driven separately by two Hypex
UCD400 400W power stage modules.
The signal is processed by a Sharc DSP programmed especially for the DDQ active systems with converters that
have a remarkable dynamic range of 127dB. It handles all protection functions, whereby the predictive peak
limiter is especially worthy of mention. With a look ahead time of 1 millisecond, it ensures absolutely distortion-
free reproduction even at maximum volume.
The bass-reflex cabinet of the DDQ active speaker is made of multiplex. Thanks to the innovative Evolutive
handles and their comparatively low weight, the DDQ 10" and 12" active speakers are easy to transport. They
are designed for all PA applications: for mobile use, permanent installation, compact systems, FOH systems or
delay lines. Thanks to their integral 50° angle, they can also be used as active monitors. All DDQ systems are
made in Germany!
3
ITALIANOPOLSKIESPAÑOL
FRANCAISFRANCAIS FRANCAISFRANCAIS
FRANCAISDEUTSCHENGLISH
LD DDQSERIES
DSP-CONTROLLED 2-WAY ACTIVE SPEAKER
LDDDQ10 / LDDDQ12
4
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS
ESpAñoLpoLSKIITALIANo
1. Please read this information carefully.
2. Keep all information and instructions in a safe place.
3. Please follow the instructions.
4. Please observe all warnings. Don‘t remove safety instructions or any other information located on the device.
5. Use the device only in the intended manner.
6. Use only stable and appropriate stands and/or mounts when the device is permanently installed. Make certain
that wall brackets are firmly secured. Make certain that the unit is installed securely and cannot fall down.
7. When installing please observe the corresponding safety standards for your country.
8. Do not install the device near radiators, heat accumulators, ovens or other sources of heat. Make certain that
the device is always installed so that is cooled sufficiently and cannot overheat.
9. Do not place open sources of ignition, e.g., burning candles, on the device.
10. Do not cover ventilation slots.
11. Do not operate the device in the immediate vicinity of water. Do not expose this equipment to combustible
materials, liquids or gases.
12. Please make certain that dripping or splashing water cannot get inside the device. Do not put objects filled
with fluids, such as vases or drinking vessels, on top of the device.
13. Make certain that objects cannot fall into the device.
14. Use the device only with accessories with which the manufacturer intends the device to be used.
15. CAUTION: If this device has a mains connector equipped with protective earth, it must be connected to a
mains socket with a protective ground connection. Never disable the function of the protective ground connection
of the included power cord.
16. Do not turn on the device immediately if it was exposed to strong temperature fluctuations (for example after
transportation). Moisture and condensation may damage the device. Leave the device switched off until it has
reached room temperature.
17. Do not open the device and do not make any changes to the device.
18. Before connecting to mains power, make certain that the mains voltage and the mains frequency are the
same as the operating values of the device (see type label). If the device is equipped with a supply voltage selec-
tor switch, make certain that the values of the device match the values of the mains power before connecting.
If the plug on the included cord does not fit your mains outlet, contact your electrician.
19. Make certain that the power cord is not stepped on. Protect the power cord against pinching, especially at
the device plug and the power plug.
20. In order to prevent damage or accidents, for example, due to tripping hazards, check all connections once
you have connected the device.
21. When connecting the device, make certain that the power plug remains readily accessible.
Always pull out the power plug when the device is not in use or when you clean the device. Disconnect the
power cord by pulling the plug not the cable. Never touch the power cable and power adapter with wet hands.
22. Avoid switching the device on and off at short intervals, because it may shorten the durability of the device.
23. IMPORTANT: Replace fuse only by fuse of same type and rating! If fuse blows repeatedly please contact
authorized service center!
24. In order to disconnect the device completely from the mains voltage, the power plug must be unplugged.
25. If your device is equipped with a Volex power connector, the matching Volex device plug must be unlocked
in order to disconnect it. This also means that a tug on the power cord can pull the device out of place, thus
causing personal injuries and/or property damage. Thus please make certain to route your cables carefully.
PREVENTIVE MEASURES:
5
ITALIANOPOLSKIESPAÑOL
FRANCAISFRANCAIS FRANCAISFRANCAIS
FRANCAISDEUTSCHENGLISH
ENGLISH
ITALIANOPOLSKIESPAÑOL
FRANCAIS
5
26. If there is a risk of lightning strike or during extended periods of disuse, unplug the power plug.
27. During transport, make certain that the equipment being transported cannot fall down and possibly
cause personal injuries and/or property damage.
28. If your device no longer works properly, if it has been exposed to liquids or an object has fallen inside it or
if it has been damaged in some other manner, turn the device off immediately und unplug the power plug. This
device should be repaired only by authorized experts.
29. Use only a dry cloth to clean the device.
30. Comply with all of the disposal laws that are applicable in your country. During disposal, please separate
plastic and paper/cardboard.
31. Plastic bags must be kept out of the reach of children.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
PREVENTIVE MEASURES:
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer
servicing to qualified personnel.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product´s enclosure that may be
of sufficient magnitude to constitute a risk to persons.
The exclamation mark within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
CAUTION! HIGH VOLUME!
This product is designed for professional use. Therefore the commercial use of this equipment is liable to the
rules and regulations of the Accident Prevention & Insurance Association of your industry sector. Adam Hall as a
manufacturer is bound to inform you formally about the existence of eventual sanitary risks.
Risk of hearing damage due to prolonged exposure to excessive volumes: When using this product high sound
pressure levels (SPL) can be generated, sufficient to cause permanent hearing damage to performers, production
crew and audience members. Caution should be taken to avoid prolonged exposure SPL in excess of 90 dB.
ENGLISH
6
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS
ESpAñoLpoLSKIITALIANo
3
5
6
2
1
4
10
9
8
7
11 12
REAR/ CONTROLS (LDDDQ12 PICTURED):
1
ANALOG INPUT
Balanced XLR line input (23 dBu max.).
2
INPUT LINK
Balanced XLR line output
3
SUB OUT
Balanced XLR subwoofer line output
4
GAIN DB
Input sensitivity control with respect to the volume
of the amplifier module. If the maximum input
level (23dBu) is exceeded, this is indicated by
collective flashing of LEDs 7-10. In this case,
reduce the level of the signal source to avoid
negative effects on the sound.
5
LOW CUT / SUB OUT
Enabled switch activates both the high pass filter
for DDQ10/12 (100 Hz, 18 dB/oct. Butterworth)
and the low pass filter (100 Hz, 18 dB/oct.
Butterworth) for the SUB OUT. If the switch is not
enabled, the sub output signal is not affected by
any filter.
6
GROUND LIFT
Can eliminate ground loop hum if devices with
varying ground potentials are connected.
7
OPERATE LED
Lights up once the speaker system is switched on
and properly connected to the power mains.
8
SIGNAL LED
Lights up when an audio signal is present at the
line input (> -30dBu).
9
PEAK LIMIT LED
Lights up if the speaker is operating in the
clipping range. Brief flashing is not a cause for
concern, since the internal audio limiter compen-
sates for over-modulation. Permanent illumination
should be avoided by reducing the input level.
7
ITALIANOPOLSKIESPAÑOL
FRANCAISFRANCAIS FRANCAISFRANCAIS
FRANCAISDEUTSCHENGLISH
REAR/ CONTROLS (LDDDQ12 PICTURED):
10
LOW CUT / SUB OUT LED
Lights up if the associated switch is pressed.
11
AC INPUT
(180 - 264 V AC, 47 - 63 Hz)
Connection via the IEC power cord included.
12
POWER SWITCH
For turning the unit on and off.
REAR/ CONTROLS (LDDDQ12 PICTURED):
8
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS
ESpAñoLpoLSKIITALIANo
LDDDQ10
dB
0
-10
-24
-30
-40
0.05 0.2
0.5 1 2 5 10 kHz
LDDDQ12
dB
0
-10
-24
-30
-40
0.05 0.2
0.5 1 2 5 10 kHz
FREQUENCY RESPONSE:
9
ITALIANOPOLSKIESPAÑOL
FRANCAISFRANCAIS FRANCAISFRANCAIS
FRANCAISDEUTSCHENGLISH
120
180
60
0
- 60
- 120
- 180
125
200
315
500
800
1250
2000
3150
8000
5000
20000
12500
-6 dB -12 dB
Horizontal Isobars of: LD DDQ10
120
180
60
0
- 60
-120
-180
125
200
315
500
800
1250
2000
3150
8000
5000
20000
12500
Vertical Isobars of: LD DDQ10
-6 dB -12 dB
DISPERSION BEHAVIOUR:
FREQUENCY RESPONSE:
10
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS
ESpAñoLpoLSKIITALIANo
120
180
60
0
- 60
- 120
- 180
125
200
315
500
800
1250
2000
3150
8000
5000
20000
12500
Horizontal Isobars of: LD DDQ12
-6 dB -12 dB
120
180
60
0
- 60
- 120
- 180
125
200
315
500
800
1250
2000
3150
8000
5000
20000
12500
Vertical Isobars of: LD DDQ12
-6 dB -12 dB
DISPERSION BEHAVIOUR:
11
ITALIANOPOLSKIESPAÑOL
FRANCAISFRANCAIS FRANCAISFRANCAIS
FRANCAISDEUTSCHENGLISH
Heat Sink
SIMPS
Amp Power Rail
Power
Amps
2x
400W
Subwoofer
out Sym.
Clip Detect
Amp
Low Cut/
Sub Out
Gain
Encoder
Analog In
Sym.
Analog
link
Stacked ADC
24bit/48kHz
Sens. 23dBu
Dyn. 127dB
Master
Gain
2 Ch.
2 Ch.
Gain
Delay
IlR EQ
IlR Xov
Phase
2 Ch.
High
Pass
2 Ch.
LS Peak Look ahead (1ms)
LS Thermal limiter
Amp RMS
1 Ch.
LS Peak Look ahead (1ms)
1 Ch.
Low
Pass
2 Ch DAC
max Level
13,7dBu
113dB Dyn.
1 Ch DAC
max Level
18dBu
113dB Dyn.
Limiter Decrease
Sharc
Mute Control
Onboard PS
+/- 14,4V Dig Vol.
Temp. Ctr.
µC
DISPERSION BEHAVIOUR:
DSP BLOCK DIAGRAMME:
12
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS
ESpAñoLpoLSKIITALIANo
FRONT OF HOUSE CONFIGURATION
For the front of house application, the narrower side of the HF horn opening must face downward.
STAGE MONITOR CONFIGURATION
For use as a stage monitor, the LDDDQ10 and LDDDQ12 can be position lying on their sides (horizontal setup). If
necessary, the HF horn can be rotated by 90° in order to attain a greater
HF dispersion angle. To do this, the active speaker must first be switched off and disconnected from the mains.
Next remove the front grille and loosen and remove the screws on the mounting flange of the horn . Afterwards
the horn can be rotated by 90° and re-fastened (please never rotate more than 90°). If the HF horn is to rotated
back for a vertical setup, this must always be done in the opposite direction. Rotating the HF horn multiple times
in the same direction can damage the leads to the HF system or its terminals.
HORN CONFIGURATION:
13
ITALIANOPOLSKIESPAÑOL
FRANCAISFRANCAIS FRANCAISFRANCAIS
FRANCAISDEUTSCHENGLISH
INSTALLATION & MOUNTING:
ADJUSTING THE SM707 CABINET FLANGE
The built-in, patented SM707 cabinet flange is highly adjustable.
The SM707 permits angles of between + und - 13.5° in increments of 4.5°.
Carefully lift the cabinet a little (approx. 0.5 cm) to unlock the locking mechanism, then tilt the cabinet to the
desired position and lower it again.
FLOWN OPERATION:
The speakers are equipped with appropriate flyware for flown operation.
The LD DDQ series speakers have M8 threads for use with M8 eyelet bolts, which can be used to suspend the
speakers
on chains with snap hooks or wire ropes.
Please use only appropriately certified, undamaged flyware (flying points,
eyelet bolts, snap hooks, chains, wire ropes, etc.). Please also observe the corresponding requirements
for flown operation above persons in correspondingly applicable regulations (varies from country to country)!
As an alternative to flying points, the speakers can be flown using the LDDDQ10SB and LDDDQ12SB swing bra-
ckets developed especially for the LD DDQ series. The assembly instructions can be found on the next two pages
of this user's manual. The swing brackets can be fastened securely to crossbar systems, for example, using the
optional Adam Hall SCP838 "self-lock" hooks.
MAINTENANCE:
The best way to clean the surface of the loudspeaker‘s cabinet is to use a dry, medium-hard brush (wallpaper
brush). Use only a dry cloth to clean the control panel.
Pivot point
+/- 13,5°
Lift cabinet
Caution! Please hold the
cabinet securely!
Tilt cabinet to the
desired position.
Lower cabinet again.
14
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS
ESpAñoLpoLSKIITALIANo
SWING BRACKET LDDDQ10SB:
2
4
4
1
3
4
4
3
2
1
BRACKET
2
LEVER BOLT
3
STEEL WASHER
4
RUBBER WASHER
15
ITALIANOPOLSKIESPAÑOL
FRANCAISFRANCAIS FRANCAISFRANCAIS
FRANCAISDEUTSCHENGLISH
SWING BRACKET LDDDQ10SB:
SWING BRACKET LDDDQ12SB:
1
BRACKET
2
LEVER BOLT
3
STEEL WASHER
4
RUBBER WASHER
5
HANDLE FRAME
6
SEMICIRCULAR NUT
1
2
3
4
4 3
6
5
4
2
3
4
16
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS
ESpAñoLpoLSKIITALIANo
ACCESSORIES:
LDDDQ10B / LDDDQ12B
Protective cover for LDDDQ10 / LDDDQ12
LDDDQ10SB / LDDDQ12SB
Swing bracket for LDDDQ10 / LDDDQ12
LDDDQ10WB / LDDDQ12WB
Wall bracket for LDDDQ10 / LDDDQ12
SMBS5
Wall mount
SPS023S / SPS023
Speaker stands
17
ITALIANOPOLSKIESPAÑOL
FRANCAISFRANCAIS FRANCAISFRANCAIS
FRANCAISDEUTSCHENGLISH
ACCESSORIES:
SPECIFICATIONS:
Product type:
PA speaker, DSP-controlled PA speaker, DSP-controlled
Type: Active Active
Woofer size: " 10 12
Woofer size: mm 254 305
Woofer magnet: neodymium neodymium
Woofer brand: Faital Pro (10PR300, 4 ohms) Faital Pro (12PR300, 4 ohms)
Woofer voice coil: 2,5 2,5
Woofer voice coil: mm 63,5 63,5
Horn: asymmetrical horn asymmetrical horn
Tweeter size: " 1 1
Tweeter size: mm 25,4 25,4
Tweeter magnet: ceramic ceramic
Tweeter brand: BMS 4524 BMS 4524
Tweeter voice coil: " 1 1
Tweeter voice coil: mm 25,4 25,4
Dispersion angle (H
x V):
° 80 x 60 asymmetrical 80 x 50 asymmetrical
AD/DA converter: 24-bit / 48 kHz 24-bit / 48 kHz
DSP: Sharc Sharc
Amplifier: 2 x Class D Hypex UCD400 2 x Class D Hypex UCD400
Woofer output (RMS): W 400 400
Tweeter power output
(RMS):
W 400 400
Frequency range: Hz 59 - 20.000 54 - 20.000
Crossover frequency: Hz 1.500 1.500
Max. SPL (continuous): dB 119.5 @ 100 - 10,000Hz continuous
program
121 @ 100 - 10,000Hz continuous
program
Max. SPL (peak): dB 132* 134*
Protection: DSP-based "look ahead" limiter, RMS
speaker limiter, RMS power supply
limiter, overvoltage, overcurrent
DSP-based "look ahead" limiter, RMS
speaker limiter, RMS power supply
limiter, overvoltage, overcurrent
Input impedance: kOhms 10 10
Input sensitivity: dBu max. 23 max. 23
Controls: Gain dB, low-cut / sub out, ground lift,
power switch
Gain dB, low-cut / sub out, ground
lift, power switch
Indicators: Operate, signal, peak limit, low-cut
/ sub out
Operate, signal, peak limit, low-cut
/ sub out
Line inputs: 1 1
Line input connectors: XLR XLR
18
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS
ESpAñoLpoLSKIITALIANo
Line outputs: Input link, sub out Input link, sub out
Line output connectors: XLR XLR
Operating voltage: 180 - 264 V AC, 47 - 63 Hz 180 - 264 V AC, 47 - 63 Hz
Cabinet material: 15mm birch plywood 15mm birch plywood
Cabinet surface: PA painting PA painting
Cabinet type: bass reflex bass reflex
Monitor angle: ° 50 50
Width: mm 315 360
Height: mm 530 600
Depth: mm 370 378
Weight: kg 15,5 17
Other features: LD SYSTEMS Evolutive handles, 36
mm cabinet flange, adjustable verti-
cal tilt (SM707), swing-bracket-ready,
switchable high pass filter (100 Hz,
Butterworth, 18 dB)
LD SYSTEMS Evolutive handles,
36 mm cabinet flange, adjustable
vertical tilt (SM707), swing-bracket-
ready, switchable high pass filter
(100 Hz, Butterworth, 18 dB)
*Short term max. SPL peak @ 1m
with pink noise
*Short term max. SPL peak @ 1m
with pink noise
SPECIFICATIONS:
19
ITALIANOPOLSKIESPAÑOL
FRANCAISFRANCAIS FRANCAISFRANCAIS
FRANCAISDEUTSCHENGLISH
MANUFACTURER´S DECLARATIONS:
LIMITED WARRANTY
This Limited Warranty applies to the Adam Hall, LD Systems, Defender, Palmer, Cameo and Eminence branded
products.
The statutory warranty rights towards the seller are not affected by this guarantee. In fact, it justifies, additional
independent warranty claims towards Adam Hall.
Adam Hall warrants that the Adam Hall product you have purchased from Adam Hall or from an Adam Hall autho-
rized reseller is free from defects in materials or workmanship under normal use for a period of 2 or 3 years from
the date of purchase.
The Limited Warranty Period starts on the date of purchase. In order to receive warranty services you are requi-
red to provide proof of the purchase date. Your dated sales or delivery receipt, showing the date of purchase,
is your proof of the purchase date. Should products of the brands named above be in need of repair within the
limited warranty period, you are entitled to warranty services according to the terms and conditions stated in this
document.
This Limited Warranty extends only to the original purchaser of this Adam Hall branded product and is not trans-
ferable to anyone who obtains ownership of the Adam Hall branded product from the original purchaser. During
the Limited Warranty Period, Adam Hall will repair or replace the defective component parts or the product. All
component parts or hardware products removed under this Limited Warranty become the property of Adam Hall.
In the unlikely event that your Adam Hall product has a recurring failure, Adam Hall, at its discretion, may elect to
provide you with a replacement unit of Adam Hall´s choice that is at least equivalent to your Adam Hall branded
product in hardware performance.
Adam Hall does not warrant that the operation of this product will be uninterrupted or error-free. Adam Hall is not
responsible for damage that occurs as a result of your failure to follow the instructions included with the Adam
Hall branded product.
This Limited Warranty does not apply,
- to wear parts (e.g. accumulator)
- to any product from which the serial number has been removed or that has been damaged or rendered defecti-
ve as the result of an accident
- in case of, misuse, abuse, or other external causes
- by operation outside the usage parameters stated in the user´s documentation shipped with the product by use
of spare parts not manufactured or sold by Adam Hall
- by modification or service by anyone other than Adam Hall
These terms and conditions constitute the complete and exclusive warranty agreement between you and Adam
Hall regarding the Adam Hall branded product you have purchased.
SPECIFICATIONS:
20
ENGLISHDEUTSCHFRANCAIS
FRANCAISFRANCAIS FRANCAISFRANCAIS
ESpAñoLpoLSKIITALIANo
MANUFACTURER´S DECLARATIONS:
LIMITATION OF LIABILITY
If your Adam Hall branded hardware product fails to work as warranted above, your sole and exclusive remedy
shall be repair or replacement. Adam Halls’ maximum liability under this limited warranty is expressly limited
to the lesser of the price you have paid for the product or the cost of repair or replacement of any hardware
components that malfunction in conditions of normal use.
Adam Hall is not liable for any damages caused by the product or the failure of the product, including any lost
profits or savings or special, incidental, or consequential damages. Adam Hall is not liable for any claim made by
a third party or made by you for a third party.
This limitation of liability applies whether damages are sought, or claims are made, under this Limited Warranty
or as a tort claim (including negligence and strict product liability), a contract claim, or any other claim. This limi-
tation of liability cannot be waived or amended by any person. This limitation of liability will be effective even if
you have advised Adam Hall of an authorized representative of Adam Hall of the possibility of any such damages.
This limitation of liability however, will not apply to claims for personal injury.
This Limited Warranty gives you specific legal rights. You may also have other rights that may vary from state to
state or from country to country. You are advised to consult applicable state or country laws for a full determina-
tion of your rights.
REQUESTING WARRANTY-SERVICE
To request warranty service for the product, contact Adam Hall or the Adam Hall authorized reseller from which
you purchased the product.
EC DECLARATION OF CONFORMITY
These devices meet the essential requirements and further relevant specifications of Directives 2004/108/EC
(EMC) and 2006/95/EC (LVD). For more information, see www.adamhall.com.
CORRECT DISPOSAL OF THIS PRODUCT (ELECTRICAL WASTE)
(Applicable in the European Union and other European countries with separate collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with other household
wastes at the end of its working life. To prevent possible harm to the environment or human health from uncon-
trolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details on where and how they can recycle this item in an enviromentally friendly manner.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product should not be mixed with other commercial wastes for disposal.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122

LD Systems DDQ 10 Instrukcja obsługi

Typ
Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla