Beta 1931CD6 Instrukcja obsługi

Kategoria
Elektronarzędzia
Typ
Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

1932B10
Gebruikshandleiding
NL
Manuale d'uso e istruzioni
IT
Operation manual and instructions
EN
Notice d'utilisation et instructions
FR
Bedienungsanleitung
DE
Manual de uso e instrucciones
ES
Manual de uso e instruções
PT
Bruksanvisning
SV
Käyttöohjeet
FI
Brugsmanual
DA
Bruksveiledning
NO
Használati kézikönyv és útmutató
HU
Kullanım ve Talimat Kılavuzu
TR
Instrukcja obsługi i zalecenia
PL
2
3
MANUALE D’USO ED ISTRUZIONI
IT
MANUALE D’USO ED ISTRUZIONI PER TRAPANI PNEUMATICI PRODOTTI DA:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALIA
Documentazione redatta originariamente in lingua ITALIANA.
Conservare accuratamente le istruzioni di sicurezza e consegnarle al personale utilizzatore.
DESTINAZIONE D’USO
Il trapano pneumatico è destinato al seguente uso:
• Forare e svasare.
• È possibile l’impiego del trapano anche in luoghi aperti esposti ad acqua e aria.
Non sono consentite le seguenti operazioni:
• Filettare e/o maschiare.
• Avvitare e/o svitare.
• È vietato l’uso in ambienti contenenti atmosfere potenzialmente esplosive.
• È vietato bloccare il pulsante di azionamento con nastro adesivo o fascette.
SICUREZZA DELLA POSTAZIONE DI LAVORO
Prestare attenzione alle superci che possono diventare scivolose a causa dell’uso della macchina ed al pericolo di
inciampamento nel tubo essibile dell’aria.
• Durante l’utilizzo dell’utensile pneumatico per lavori eseguiti in quota, adottare tutte le misure preventive atte ad eliminare o
minimizzare i rischi ad altri lavoratori, conseguenti a possibili cadute accidentali dell’attrezzatura (per esempio segregazione
dell’area di lavoro, adeguata segnalazione, etc.).
Non utilizzare l’utensile pneumatico in ambienti contenenti atmosfere potenzialmente esplosive,
perché possono svilupparsi scintille in grado di incendiare polveri, vapori o gas.
Evitare il contatto con apparecchiature in tensione, in quanto l’utensile pneumatico non è isolato ed
il contatto con elementi in tensione può causare una scossa elettrica.
Al ne di rilevare linee di alimentazione nascoste, utilizzare adatte apparecchiature di ricerca oppure rivolgersi alla locale
società erogatrice. Un contatto con linee elettriche può provocare lo sviluppo di incendi e di scosse elettriche.
Danneggiando linee del gas si crea il pericolo di esplosioni. Penetrando una tubazione dell’acqua si provocano
seri danni materiali.
Impedire che bambini o visitatori possano avvicinarsi alla postazione di lavoro mentre si sta operando con l’utensile
pneumatico. La presenza di altre persone provoca distrazione che può comportare la perdita del controllo sull’utensile
pneumatico.
SICUREZZA DEGLI UTENSILI PNEUMATICI
• Non puntare mai il usso d’aria verso se stessi o verso altre persone. L’aria compressa può causare lesioni serie.
Controllare raccordi di collegamento e tubazioni di alimentazione. Tutti i gruppi, i giunti e i tubi essibili devono essere installati
conformemente ai dati tecnici relativa a pressione e usso d’aria. Una pressione troppo bassa pregiudica il funzionamento
dell’utensile pneumatico, una pressione alta può causare danni e/o lesioni.
Evitare di piegare o stringere tubi essibili, evitare l’uso di solventi e spigoli taglienti. Proteggere i tubi da calore, olio e parti
rotanti. Sostituire immediatamente un tubo essibile danneggiato. Una tubazione di alimentazione difettosa può provocare
movimenti incontrollati del tubo dell’aria compressa. Polveri oppure trucioli sollevati dall’aria possono provocare lesioni agli
occhi. Accertarsi che le fascette per tubi essibili siano sempre bene ssate.
IMPORTANTE LEGGERE COMPLETAMENTE IL PRESENTE MANUALE
PRIMA DI UTILIZZARE L’UTENSILE PNEUMATICO. IN CASO DI MANCATO
RISPETTO DELLE NORME DI SICUREZZA E DELLE ISTRUZIONI
OPERATIVE, POSSONO VERIFICARSI SERI INFORTUNI.
ATTENZIONE
4
MANUALE D’USO ED ISTRUZIONI
IT
INDICAZIONE PER LA SICUREZZA DEL PERSONALE
• Si raccomanda la massima attenzione avendo cura di concentrarsi sempre sulle proprie azioni. Non utilizzare l’utensile
pneumatico in caso di stanchezza o sotto l’effetto di droghe, bevande alcoliche o medicinali.
• Utilizzare sempre i seguenti dispositivi individuali di protezione:
- Occhiali di protezione
- Scarpe di sicurezza
- Otoprotettori
- Guanti di protezione per agenti sici
- Guanti antivibrazione, da utilizzare a seguito di specica analisi del livello di esposizione giornaliera alle vibrazioni per
sistema mano-braccio
- Mascherina di protezione per agenti sici in funzione dei valori riscontrati nell’indagine di igiene ambientale/industriale
Avere cura di mettersi in posizione sicura mantenendo l’equilibrio in ogni momento. Una posizione di lavoro sicura ed una
adatta postura del corpo permettono di poter controllare meglio l’utensile pneumatico in caso di situazioni inaspettate.
• Non indossare vestiti larghi. Non portare bracciali e catenine. Tenere capelli, vestiti e guanti lontano da parti in movimento.
Vestiti larghi, gioielli o capelli lunghi possono impigliarsi nelle parti in movimento.
• Non respirare direttamente l’aria di scarico, evitando che possa arrivare agli occhi. L’aria di scarico dell’utensile pneumatico
può contenere acqua, olio, particelle metalliche ed impurità, che possono provocare pericoli.
UTILIZZO ACCURATO DI UTENSILI PNEUMATICI
Per bloccare e supportare il pezzo in lavorazione utilizzare dispositivi di serraggio oppure morse. Non tenere il pezzo in
lavorazione con una mano o bloccato con il corpo; così facendo non è più possibile operare in sicurezza.
• Non sottoporre l’utensile pneumatico a sovraccarico. Effettuare i propri lavori utilizzando esclusivamente l’utensile
pneumatico esplicitamente previsto per il caso.
• Vericare sempre l’integrità della macchina. Non utilizzare alcun utensile pneumatico il cui interruttore di avvio/arresto sia
difettoso. Un utensile pneumatico che non può più essere arrestato o avviato è pericoloso e deve essere riparato.
• Interrompere sempre l’alimentazione dell’aria prima di effettuare operazioni di regolazione sull’apparecchio, prima di
sostituire accessori oppure nel caso in cui lo stesso non venga utilizzato. Questa misura preventiva impedisce l’avvio
accidentale dell’utensile pneumatico.
Quando gli utensili pneumatici non vengono utilizzati, conservarli al di fuori del raggio di accesso dei bambini. Non permettere
di usare l’utensile pneumatico a persone che non abbiano letto le presenti istruzioni.
• Effettuare accuratamente la verica dell’utensile pneumatico, accertandosi che parti mobili dell’utensile funzionino
perfettamente, che non si inceppino e che non vi siano pezzi rotti o danneggiati al punto da pregiudicarne il funzionamento.
Far riparare le parti danneggiate prima dell’impiego dell’utensile pneumatico.
• Mantenere gli utensili da taglio sempre aflati e puliti. Gli utensili da taglio curati con particolare attenzione e con taglienti
aflati si bloccano meno frequentemente e sono più facili da condurre.
• L’utensile pneumatico non deve essere modicato. Le modiche possono ridurre l’efcacia delle misure di sicurezza ed
aumentare i rischi per l’operatore.
• Fare riparare l’utensile pneumatico solo ed esclusivamente da personale specializzato e solo impiegando pezzi di ricambio
originali.
INDICAZIONI DI SICUREZZA PER TRAPANI PNEUMATICI
• Controllare se la targhetta di identicazione è leggibile, eventualmente procurarsi la targhetta per la sostituzione dal
produttore.
• Possono essere scagliati dei pezzi ad elevata velocità, nel caso di rottura dell’utensile da taglio o del pezzo in lavorazione.
• L’operatore ed il personale addetto alla manutenzione devono essere in grado di gestire sicamente il peso e la potenza
dell’utensile pneumatico.
• E’ importante essere preparati a movimenti inaspettati dell’utensile pneumatico dovuti a bloccaggio o rottura dell’utensile da
taglio. Tenere sempre ben saldo l’utensile pneumatico e portare il proprio corpo e le proprie braccia in una posizione che
permetta di compensare questi movimenti. Queste misure possono evitare lesioni.
5
MANUALE D’USO ED ISTRUZIONI
IT
• L’utensile pneumatico si può bloccare se:
- L’utensile pneumatico viene sovraccaricato.
- L’utensile da taglio rimane bloccato nel pezzo in lavorazione.
- L’utensile da taglio attraversa completamente il materiale in lavorazione.
• Non avvicinare mai la mano al mandrino o all’utensile da taglio: ci si può ferire.
Assicurarsi che il senso di rotazione del trapano pneumatico sia consono all’utensile da taglio utilizzato.
• Nel caso di un’interruzione dell’alimentazione dell’aria oppure di una pressione di esercizio ridotta, spegnere l’utensile.
Controllare la pressione d’esercizio e, a pressione d’esercizio ottimale, avviare di nuovo.
• Utilizzando l’utensile pneumatico è possibile che l’operatore, svolgendo le attività concernenti al lavoro, provi sensazioni
fastidiose a mani, braccia, spalle e nell’area del collo. Assumere una posizione comoda evitando posizioni sfavorevoli o cambiare
la postura possono aiutare ad evitare fastidi ed affaticamento.
Attenzione nel caso di funzionamento prolungato dell’utensile pneumatico: parte dell’utensile stesso e l’utensile da taglio
possono diventare caldi. Utilizzare guanti di protezione.
Pericoli dovuti a polveri e fumi: in funzione della tipologia del materiale lavorato, i fumi generati durante l’utilizzo dell’utensile
pneumatico possono causare patologie alla salute delle persone. Una specica indagine di igiene ambientale è necessaria
per stabilire l’esatta assegnazione del tipo e del grado di protezione dello specico dispositivo di protezione individuale da
utilizzare per le vie respiratorie.
Durante l’utilizzo dell’utensile pneumatico sul pezzo da lavorare si generano rumori, a volte anche nocivi, per il personale
esposto. E’ necessaria una specica indagine fonometrica per stabilire l’esatta assegnazione dello specico dispositivo
di protezione individuale dell’udito (otoprotettore) da utilizzare.
Se da specica indagine eseguita risulta che l’esposizione giornaliera alle vibrazioni generata durante l’utilizzo dell’utensile
pneumatico supera il valore limite di azione prevista dalla normativa vigente nel rispettivo paese, si devono utilizzare
specici guanti antivibrazione.
• Qualora doveste accorgervi che la pelle delle dita diventa intorpidita, oppure bianca, presenta formicolio o dolore, sospendere
il lavoro con l’utensile pneumatico, informare il datore di lavoro e consultare un medico.
• Non far sobbalzare la punta sul pezzo in lavorazione: questo può causare aumento sensibile delle vibrazioni.
Tenere l’utensile pneumatico con una presa non eccessivamente salda ma sicura, considerando le necessarie forze di reazione
della mano.
• Non trasportare mai l’utensile pneumatico tenendolo per il tubo essibile.
DISPOSITIVI DI PROTEZIONE INDIVIDUALI PREVISTI DURANTE L’UTILIZZO DELL’UTENSILE PNEUMATICO
La mancata osservanza delle seguenti avvertenze può causare lesioni siche e/o patologie.
UTILIZZARE SEMPRE GUANTI DI PROTEZIONE PER AGENTI FISICI DURANTE
L’UTILIZZO DELL’UTENSILE PNEUMATICO
INDOSSARE SEMPRE DISPOSITIVI OTOPROTETTORI QUANDO SI ADOPERA
L’UTENSILE PNEUMATICO
INDOSSARE SEMPRE GLI OCCHIALI PROTETTIVI QUANDO SI ADOPERA
L’UTENSILE PNEUMATICO O QUANDO SI ESEGUE L’ATTIVITÀ DI
MANUTENZIONE
UTILIZZARE SEMPRE CALZATURE DI SICUREZZA
6
ISTRUZIONI PER L’USO
I
MANUALE D’USO ED ISTRUZIONI
IT
CAPACITÀ MANDRINO
FILETTATURA ALBERO
VELOCITÀ A VUOTO
POTENZA
ATTACCO ARIA
PRESSIONE MASSIMA
DIAMETRO INT. MINIMO TUBO ARIA
CONSUMO D’ARIA MASSIMO
PESO
LUNGHEZZA TOTALE
RUMORE (ISO 15744)
LIVELLO POTENZA SONORA
LIVELLO PRESSIONE SONORA
VIBRAZIONI (ISO 28927)
LIVELLO VIBRAZIONI
INCERTEZZA
1 ÷ 10 mm
3/8” 24 UNF
1800 rpm
0.44 kW
1/4” GAS Conico
6.2 bar
10 mm
160 l/min
1.2 kg
190 mm
L
WA
= 107.9 dB
L
PA
= 96.9 dB
3.3 m/s
2
K = 1.1 m/s
2
DATI TECNICI
UTILIZZARE GUANTI ANTIVIBRAZIONE DURANTE L’UTILIZZO DELL’UTENSILE
PNEUMATICO A SEGUITO DI SPECIFICA ANALISI DEL LIVELLO DI ESPOSIZIONE
GIORNALIERA ALLE VIBRAZIONI PER SISTEMA MANO-BRACCIO
UTILIZZARE MASCHERA DI PROTEZIONE PER AGENTI FISICI IN FUNZIONE DEI
VALORI RISCONTRATI NELL’INDAGINE DI IGIENE AMBIENTALE/INDUSTRIALE
UTILIZZARE CASCO DI PROTEZIONE
Ulteriori dispositivi di protezione individuali da utilizzare in funzione dei valori riscontrati nell’indagine di igiene
ambientale/analisi rischi nell’eventualità che i valori superino i limiti previsti dalle vigenti normative.
LEGENDA
a: Pulsante azionamento trapano
b: Attacco aria 1/4” GAS
c: Leva inversione rotazione mandrino
d: Ghiera anteriore
e: Ghiera posteriore
f: Mandrino “apre – chiude”
g: Lubricazione olio
Collegamento alimentazione dell’aria
Per un utilizzo corretto dell’utensile pneumatico rispettare sempre la pressione massima di 6.2 bar, misurata all’ingresso
dell’utensile. Alimentare l’utensile pneumatico con aria pulita e priva di condensa (immagine 2-b). Una pressione troppo elevata o
la presenza di umidità nell’aria di alimentazione riducono la durata delle parti meccaniche e possono causare danni all’utensile.
UTILIZZO
Avviamento / Arresto
Per avviare l’utensile pneumatico premere il pulsante di avviamento (immagine 2-a), tenendolo premuto durante l’esecuzione del
lavoro. Al rilascio del pulsante l’utensile pneumatico si arresta in un tempo inferiore ai 2 sec.
Controllare la posizione della leva di inversione prima di azionare l’utensile pneumatico, in modo di conoscere il senso di rotazione.
Impostazione senso di rotazione
L’utensile pneumatico prevede il senso di rotazione orario ed antiorario. Selezionare il senso di rotazione attraverso la leva di
inversione (immagine 3-c):
7
ISTRUZIONI PER L’USO
I
MANUALE D’USO ED ISTRUZIONI
IT
“ F ” FORWARD AVANTI senso orario - visto dal lato dell’operatore
“ R ” REVERSE INDIETRO senso antiorario - visto dal lato dell’operatore
Mandrino
Il mandrino è di tipo autoserrante. Per l’inserimento della punta procedere nel seguente modo:
• Bloccare manualmente la ghiera posteriore del mandrino (immagine 4-e).
Ruotare manualmente la ghiera anteriore in senso antiorario (immagine 4-d), aprire il mandrino no all’inserimento della punta.
• Inserire la punta desiderata.
• Ruotare manualmente la ghiera anteriore in senso orario, no al bloccaggio del mandrino.
Sostituire la punta nel seguente modo:
• Bloccare manualmente la ghiera posteriore del mandrino.
• Ruotare manualmente la ghiera anteriore in senso antiorario, a questo punto la punta sarà svincolata dal mandrino.
• Inserire la punta desiderata, ruotare manualmente la ghiera anteriore in senso orario, no al bloccaggio del mandrino.
Interrompere sempre l’alimentazione dell’aria prima di effettuare operazioni di inserimento utensili da taglio o regolazioni,
questa misura preventiva impedisce l’avvio accidentale dell’utensile pneumatico.
Lubricazione
E’ indispensabile collegare l’utensile pneumatico ad un gruppo ltro-lubricatore di linea “si consiglia art. 1919F1/4” a micronebbia,
regolato a due gocce al minuto. In questo caso si avrà una resa elevata con una ridotta usura delle parti meccaniche.
Nel caso la linea fosse sprovvista di lubricazione, è necessario immettere periodicamente direttamente nell’utensile pneumatico,
attraverso il foro di alimentazione dell’aria, olio ISO 32 (immagine 5-g).
MANUTENZIONE
Gli interventi di manutenzione e di riparazione devono essere eseguiti da personale specializzato. Per tali interventi potete
rivolgervi al centro riparazioni di Beta Utensili S.P.A.
SMALTIMENTO
L’utensile pneumatico, gli accessori e gli imballaggi devono essere inviati ad un centro di raccolta smaltimento riuti, secondo le
leggi vigenti del paese in cui vi trovate.
GARANZIA
Questo utensile è fabbricato e collaudato secondo le norme attualmente vigenti nella Comunità Europea ed è coperto da garanzia
per un periodo di 12 mesi per uso professionale o 24 mesi per uso non professionale.
Vengono riparati guasti dovuti a difetti di materiale o di produzione mediante ripristino o sostituzione dei pezzi difettosi a nostra
discrezione.
L’effettuazione di uno o più interventi nel periodo di garanzia non modica la data di scadenza della stessa.
Non sono soggetti a garanzia difetti dovuti all’usura, all’uso errato od improprio e le rotture causate da colpi e/o cadute. La
garanzia decade quando vengono apportate modiche, quando l’utensile pneumatico viene manomesso o quando viene inviato
all’assistenza smontato.
Sono espressamente esclusi danni causati a persone e/o cose di qualsiasi genere e/o natura, diretti e/o indiretti.
___________________________________________________________________________________________________
DICHIARAZIONE DI CONFORMITÀ
Dichiariamo sotto la nostra piena responsabilità che il prodotto descritto è conforme a tutte le disposizioni pertinenti della Direttiva
Macchine 2006/42/CE e relative modiche, nonché alla seguente normativa:
• EN ISO 11148-3
Il Fascicolo Tecnico è disponibile presso:
BETA UTENSILI S.P.A.
Via A. Volta 18
20845 Sovico (MB)
ITALIA
8
ISTRUZIONI PER L’USO
I
OPERATION MANUAL AND INSTRUCTIONS
EN
OPERATION MANUAL AND INSTRUCTIONS FOR AIR DRILLS MANUFACTURED BY:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALY
Original documentation drawn up in ITALIAN.
Store the safety instructions with care and hand them over to the users.
PURPOSE OF USE
The air drill can be used for the following purposes:
• Drilling and countersinking.
• The air drill can also be used in open places exposed to water and air.
The air drill must not be used for the following operations:
• Threading and/or tapping.
• Screwing and/or unscrewing.
• The air drill must not be used in environments containing potentially explosive atmospheres.
• The trigger must not be locked with adhesive tape or clamps.
WORK AREA SAFETY
• Beware of both surfaces that may become slippery due to the use of the machine and the danger of tripping over the air hose.
• While using the pneumatic tool for jobs performed high from the ground, take all necessary precautions, to eliminate or minimize risk
to other workers, following the accidental falling of any tools (for example, isolation of the work area and proper signs).
Do not operate the pneumatic tool in environments containing potentially explosive atmospheres, because sparks may be
generated, which can ignite the dust, fumes or gases.
Avoid contact with live equipment: the pneumatic tool is not insulated, and contact with live parts can cause electric shocks.
To nd any hidden power supply lines, use suitable search tools or contact the local power supply company. Contact with
electric lines can cause res and electric shocks. Damaging gas lines causes the risk of explosion. Penetrating a water
pipe will result in severe material damage.
Keep children and bystanders away from your workplace while operating the pneumatic tool. Distractions from other
people can cause you to lose control over the pneumatic tool.
PNEUMATIC TOOL SAFETY
• Do not point the air ow to yourself or other people. Compressed air can cause serious injury.
• Check the connections and the air supply lines. All units, couplers and hoses should conform to the product specications in
terms of pressure and air volume. Too low pressure impairs the function of the pneumatic tool; too high pressure can cause
damage and/or injury.
Do not bend or tighten any hoses; avoid using solvents and sharp edges. Keep the hoses away from heat, oil and rotating
parts. Immediately replace any damaged hose. A defective feed pipe may cause uncontrolled movements of the compressed
air pipe. Raised dust or chips may cause eye injury. Make sure that the hose clamps are always secured rmly.
PERSONNEL SAFETY
• Stay alert; watch what you are doing. Do not use the pneumatic tool while tired or under the inuence of drugs, alcohol, or
medication.
IMPORTANT! READ THIS MANUAL THOROUGHLY BEFORE USING
THE PNEUMATIC TOOL. FAILURE TO COMPLY WITH THE SAFETY
STANDARDS AND OPERATING INSTRUCTIONS MAY RESULT IN
SERIOUS INJURY.
CAUTION
9
ISTRUZIONI PER L’USO
I
OPERATION MANUAL AND INSTRUCTIONS
EN
• Always use the following personal protective equipment:
- Eye protection
- Safety shoes
- Hearing protection
- Protective gloves against physical agents
- Anti-vibration gloves, to be worn following a specially conducted survey of the daily exposure of the hand-arm system to vibration
- Protective mask against physical agents according to the values found in the environmental/industrial hygiene survey.
Make sure you are in a safe position, keeping proper balance at all times. A safe working position and a proper body posture
enable better control of the pneumatic tool in unexpected situations.
Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothing, jewellery,
and long hair can get caught in moving parts.
Do not directly inhale the exhaust air, and prevent it from getting into your eyes. The exhaust air of the pneumatic tool can
contain water, oil, metal particles and impurities, which may cause hazards.
PNEUMATIC TOOL USE AND CARE
Use clamping devices or a vice to secure and support the workpiece. Holding the workpiece by hand or against your body will
not allow for safe operation of the pneumatic tool.
• Do not overload the pneumatic tool. Use the pneumatic tool intended for your work only.
Always check that the machine is free from defects. Do not use a pneumatic tool that has a defective On/Off switch. A pneumatic
tool that can no longer be stopped or started is dangerous and must be repaired.
Disconnect the air supply before making adjustments, changing accessories, or placing the pneumatic tool aside. This safety
measure prevents accidental starting of the pneumatic tool.
Store idle pneumatic tools out of the reach of children. Do not allow persons unfamiliar with these instructions to operate the
pneumatic tool.
Maintain the pneumatic tool with care. Check for misalignment or binding of moving parts, breakage or damage of parts and any
other condition that may affect the operation of the pneumatic tool. Have damaged parts repaired before using the pneumatic
tool.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are
easier to control.
• Do not modify the pneumatic tool. This can reduce the effectiveness of safety measures and increase operator risk.
• Have the pneumatic tool repaired only through a trained repair person and only using original replacement parts.
AIR DRILL SAFETY
• Make sure that the nameplate is readable; get a replacement nameplate from the manufacturer, if need be.
• If the cutting tool or the workpiece should break, loose parts may be thrown at high speed.
• Operators and maintenance personnel should be physically able to handle the weight and power of the pneumatic tool.
It is important to be prepared for unexpected movements of the pneumatic tool resulting from a jammed or broken cutting tool.
Maintain a rm grip on the pneumatic tool and position your body and arms to allow you to resist such movements. These
precautions can prevent injuries.
• The pneumatic tool may get jammed if:
- The pneumatic tool is overloaded
- The cutting tool gets jammed in the workpiece
- The cutting tool thoroughly crosses the work material
• Keep your hands away from the chuck and cutting tool: you may hurt yourself.
• Make sure that the direction of rotation of the air drill is t for the cutting tool being used.
Turn off the tool in case of air supply failure or low operating pressure. Check the operating pressure; turn on the tool again when
optimal operating pressure is resumed.
• When using the pneumatic tool, the operator can experience discomfort in the hands, arms, shoulders, or neck area. Adopt a
10
ISTRUZIONI PER L’USO
I
OPERATION MANUAL AND INSTRUCTIONS
EN
comfortable posture, and avoid awkward or off-balanced postures, or change posture to help avoid discomfort and fatigue.
Caution: If the pneumatic tool is used over a protracted period of time, part of the tool and the cutting tool may become hot.
Wear protective gloves.
Dust and fumes hazards: Depending on the type of material being worked, the fumes generated while operating the
pneumatic tool can cause diseases in humans. An appropriate environmental hygiene survey is required to determine the
type and degree of protection of the personal protective equipment to use for the respiratory tract.
Using the pneumatic tool on the workpiece generates noise, which may prove harmful to the exposed personnel.
A proper phonometric survey is required to determine the personal hearing protective equipment (hearing protection) to use.
If a specially conducted survey suggests that the daily exposure to vibration generated from the pneumatic tool exceeds the
limit value under the regulations in force in the respective country, anti-vibration gloves must be worn.
• If you notice that the skin of your ngers becomes numb, turns white, tingles or hurts, stop working with the pneumatic tool, inform
your employer and seek medical advice.
• Do not make the drill bit jump on the workpiece: this may result in signicantly increased vibration.
• Hold the pneumatic tool with a not too rm yet secure grip, compliant with the required hand reaction forces.
• Never carry the pneumatic tool by the hose.
PERSONAL PROTECTIVE EQUIPMENT TO WEAR WHILE OPERATING PNEUMATIC TOOL
Failure to observe the following warnings may result in physical injury and/or disease.
ALWAYS WEAR PROTECTIVE GLOVES AGAINST PHYSICAL AGENTS WHILE
OPERATING PNEUMATIC TOOL
ALWAYS WEAR HEARING PROTECTION WHILE OPERATING PNEUMATIC TOOL
ALWAYS WEAR EYE PROTECTION WHILE OPERATING PNEUMATIC TOOL OR
PERFORMING MAINTENANCE JOBS
ALWAYS WEAR SAFETY SHOES
WEAR ANTI-VIBRATION GLOVES WHILE OPERATING PNEUMATIC TOOL
FOLLOWING A SPECIALLY CONDUCTED SURVEY OF LEVEL OF DAILY
EXPOSURE OF HAND-ARM SYSTEM TO VIBRATION
WEAR PROTECTIVE MASK AGAINST PHYSICAL AGENTS ACCORDING TO THE
VALUES FOUND IN THE ENVIRONMENTAL/INDUSTRIAL HYGIENE SURVEY
WEAR PROTECTIVE HELMET
Additional personal protective equipment to wear according to the values found in the environmental
hygiene/risk analysis survey if the values exceed the limits under current regulations.
11
OPERATION MANUAL AND INSTRUCTIONS
EN
KEY TO SYMBOLS
a: Drill trigger
b: 1/4” GAS air inlet
c: Chuck reverse lever
d: Front nut
e: Rear nut
f: Chuck opening/closing device
g: Oil lubrication
Air supply connection
For correct use of the pneumatic tool, always keep to a maximum pressure of 6.2 bar, as measured at the tool inlet.
Feed the pneumatic tool with clean, condensate-free air (picture 2-b). Excessively high pressure or humidity in supply air results
in shorter life for the mechanical parts and may damage the tool.
USE
Start / Stop
To start the pneumatic tool, press the trigger (picture 2-a), and keep it pressed during the job to be performed.
Releasing the trigger will cause the pneumatic tool to stop within 2 seconds.
Check the position of the reverse lever before operating the pneumatic tool, so as to know the direction of rotation.
Setting direction of rotation
The pneumatic tool can rotate both clockwise and anticlockwise. Select the direction of rotation through the reverse lever
(picture 3-c):
“ F ” FORWARD clockwise - seen from the operator’s side
“ R ” REVERSE anticlockwise - seen from the operator’s side
Chuck
The chuck is self-locking. Fit in the drill bit as follows:
• Manually lock the rear nut of the chuck (picture 4-e).
• Manually rotate the front nut anticlockwise (picture 4-d), and open the chuck until the drill bit ts in.
• Fit in the required drill bit.
• Manually rotate the front nut clockwise, until the chuck is locked.
Replace the drill bit as follows:
• Manually lock the rear nut of the chuck.
• Manually rotate the front nut anticlockwise, to release the drill bit from the chuck.
• Fit in the required drill bit and manually rotate the front nut clockwise, until the chuck is locked.
Always disconnect air supply before tting in cutting tools or making adjustments; this precaution will prevent the
pneumatic tool from being accidentally started.
Lubrication
The pneumatic tool must be connected to a lter-lubricator unit (we recommend Beta item 1919F1/4) provided with an
air-oil microfog mixer, set at two drops per minute. This will result in a high-performing tool and wear-resistant mechanical parts.
CHUCK CAPACITY
SPINDLE THREAD
FREE SPEED
POWER
AIR INLET
MAXIMUM PRESSURE
MINIMUM INTERNAL HOSE SIZE (ø)
MAXIMUM AIR CONSUMPTION
WEIGHT
OVERALL LENGTH
NOISE (ISO 15744)
SOUND POWER LEVEL
SOUND PRESSURE LEVEL
VIBRATIONS (ISO 28927)
VIBRATION LEVEL
UNCERTAINTY
1 ÷ 10 mm
3/8” 24 UNF
1800 rpm
0.44 kW
1/4” GAS cone-shaped
6.2 bar
10 mm
160 l/min
1.2 kg
190 mm
L
WA
= 107.9 dB
L
PA
= 96.9 dB
3.3 m/s
2
K = 1.1 m/s
2
TECHNICAL DATA
12
ISTRUZIONI PER L’USO
I
OPERATION MANUAL AND INSTRUCTIONS
EN
If lubrication is not provided to the line, oil ISO 32 must be periodically poured into the pneumatic tool, through the air supply hole
(picture 5-g).
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel.
For such jobs, you can contact Beta Utensili S.P.A.'s repair centre.
DISPOSAL
The pneumatic tool, accessories and packaging should be sent to a waste disposal centre, in accordance with the laws in force
in your country.
WARRANTY
This tool is manufactured and tested in accordance with current EU regulations, and is covered by a 12-month warranty
for professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by xing the defective pieces or replacing them
at our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this warranty
will remain unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls. In addition,
this warranty will no longer be valid if any changes are made, or if the pneumatic tool is forced or sent to the customer
service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
___________________________________________________________________________________________________
DECLARATION OF CONFORMITY
We hereby declare, assuming full responsibility, that the described product complies with all the relevant provisions of
Machine Directive 2006/42/EC and amendments thereto, as well as with the following standard:
• EN ISO 11148-3
The Technical Brochure is available at:
BETA UTENSILI S.P.A.
Via A. Volta 18
20845 Sovico (MB)
ITALY
13
NOTICE D'UTILISATION ET INSTRUCTIONS
FR
NOTICE D’UTILISATION ET INSTRUCTIONS POUR PERCEUSES PNEUMATIQUES
PRODUITES PAR :
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALIA
Documentation rédigée à l’origine en langue ITALIENNE.
Garder scrupuleusement les instructions sur la sécurité et les remettre au personnel concerné.
DESTINATION D’UTILISATION
La perceuse pneumatique est destinée à l’utilisation suivante:
• Percer et évaser.
• Il est possible également d’utiliser la perceuse en plein air ou dans des lieux exposés à l’eau.
Les opérations suivantes ne sont pas autorisées:
• Fileter et/ou tarauder.
• Visser et/ou dévisser.
• Il est interdit d’utiliser la perceuse dans des lieux contenant des atmosphères potentiellement explosives.
• Il est interdit de bloquer la touche d’actionnement avec du ruban adhésif ou des colliers.
SÉCURITÉ DU POSTE DE TRAVAIL
Faire attention aux surfaces qui peuvent devenir glissantes à cause de l’utilisation de la machine et au risque de trébucher
dans le tuyau exible de l’air.
Lors de l’utilisation de l’outil pneumatique pour les travaux effectués en hauteur, adopter toutes les mesures de prévention pour
éliminer ou réduire au minimum les risques envers les autres travailleurs, dus notamment aux possibles chutes accidentelles
de l’outil (en délimitant par exemple la zone de travail et en prévoyant des signaux visibles etc.).
Ne pas utiliser l'outil pneumatique dans des milieux contenant des atmosphères potentiellement explosives car les
étincelles peuvent donner feu aux poussières, aux vapeurs ou aux gaz.
Éviter le contact avec des appareils sous tension: l’outil pneumatique n’est pas isolé et le contact avec des éléments sous
tension peut provoquer une secousse électrique.
An de détecter les lignes électriques cachées, utiliser des dispositifs de recherche prévus à cet effet ou s’adresser
à la société de distribution locale. Un contact avec des lignes électriques peut provoquer des incendies et des secousses
électriques. L’endommagement de conduites de gaz donne lieu à un risque d’explosion. De même, de graves dommages
matériels peuvent être causés par une intervention dans une conduite d’eau.
Empêcher que des enfants ou des visiteurs s’approchent du poste de travail pendant les opérations avec l’outil
pneumatique. La présence d’autres personnes peut distraire l’opérateur qui peut perdre le contrôle de l’outil pneumatique.
MESURES DE SÉCURITÉ POUR LES OUTILS PNEUMATIQUES
Ne diriger en aucun cas le débit d’air vers soi ou en direction d’autres personnes. L’air comprimé peut provoquer de graves lésions.
• Contrôler les branchements et les câbles d’alimentation. Tous les groupes, les raccords et les tuyaux exibles doivent être
installés conformément aux données techniques relatives à la pression et au débit d’air. Une pression trop basse empêche le
fonctionnement de l’outil pneumatique, une forte pression peut provoquer des dommages et/ou des lésions.
• Éviter de plier ou de serrer les tuyaux exibles. Éviter l’utilisation de solvants et de bords coupants. Protéger les tuyaux
contre la chaleur, l’huile et les pièces tournantes. Remplacer immédiatement les tuyaux exibles endommagés. Un tuyau
d’alimentation défectueux peut provoquer des mouvements incontrôlés du tuyau d’air comprimé. Les poussières ou les
copeaux soulevés par l’air peuvent causer des lésions aux yeux. S’assurer que les colliers pour tuyaux exibles soient
toujours bien xés.
IL EST IMPORTANT DE LIRE INTÉGRALEMENT LE PRÉSENT MANUEL
AVANT D’UTILISER L’OUTIL PNEUMATIQUE. LE NON-RESPECT DES
NORMES DE SÉCURITÉ ET DES INSTRUCTIONS D’UTILISATION PEUT
PROVOQUER DE GRAVES ACCIDENTS.
ATTENTION
14
ISTRUZIONI PER L’USO
I
NOTICE D'UTILISATION ET INSTRUCTIONS
FR
RECOMMANDATIONS POUR LA SÉCURITÉ DU PERSONNEL
• La plus grande attention doit être apportée aux actions effectuées. Ne pas utiliser l’outil pneumatique en cas de fatigue ou sous
l’effet de drogues, de boissons alcooliques ou de médicaments.
• Utiliser systématiquement les équipements de protection individuelle suivants:
- Lunettes de protection
- Chaussures de sécurité
- Dispositifs de protection de l’ouïe
- Gants de protection contre les agents physiques
- Gants anti-vibration, à utiliser suite à une analyse spécique en fonction du niveau d’exposition quotidienne aux vibrations
du système main-bras
- Masque de protection contre les agents physiques en fonction des valeurs relevées lors de l'enquête d'hygiène
environnementale/industrielle
Se placer en position sûre en veillant à ne jamais perdre l’équilibre. Une position de travail sûre et une posture correcte du corps
permettent le plein contrôle de l’outil pneumatique en cas de situations imprévues.
• Ne pas porter de vêtements larges. Ne pas porter de bracelets ou de chaînettes. Faire en sorte que la chevelure, les vêtements
et les gants soient toujours loin des parties en mouvement. Les vêtements larges, les bijoux ou les cheveux longs peuvent être
entraînés dans les parties en mouvement.
Ne pas respirer directement l’air d’échappement et éviter qu’il n’atteigne les yeux. L’air d’échappement de l’outil pneumatique
peut contenir de l’eau, de l’huile, des particules métalliques et des impuretés qui peuvent représenter des risques.
UTILISATION CORRECTE DES OUTILS PNEUMATIQUES
• Pour bloquer et soutenir la pièce travaillée, utiliser des dispositifs de serrage ou des étaux. Ne pas tenir la pièce travaillée dans
la main ou bloquée avec le corps: de cette manière la sécurité du travail n’est pas garantie.
• Ne pas soumettre l’outil pneumatique à surcharge. Effectuer les travaux en utilisant l’outil pneumatique pour le seul cas prévu.
Contrôler systématiquement l’intégrité de la machine. N’utiliser aucun outil pneumatique dont l’interrupteur de mise en marche/
arrêt est défectueux. Un outil pneumatique qui ne peut plus être arrêté ou mis en marche est dangereux et doit être réparé.
Couper l’arrivée d’air avant d’effectuer des opérations de réglage sur l’appareil, avant de remplacer des accessoires ou si ce
dernier n’est pas utilisé. Cette mesure de prévention empêche la mise en marche accidentelle de l’outil pneumatique.
Lorsque les outils pneumatiques ne sont pas utilisés, les garder hors de portée des enfants. Ne pas permettre aux personnes
qui n’ont pas lu les présentes instructions d’utiliser l’outil pneumatique.
Effectuer soigneusement le contrôle de l’outil pneumatique en s’assurant que les parties mobiles de l’outil fonctionnent
parfaitement, qu’elles ne se bloquent pas et qu’il n’y ait pas d’éléments cassés ou endommagés susceptibles d’en empêcher le
fonctionnement. Faire réparer les pièces endommagées avant l’utilisation de l’outil pneumatique.
Maintenir les outils de coupe toujours aiguisés et propres. Les outils de coupe soigneusement entretenus et aiguisés se bloquent
moins fréquemment et sont plus faciles à utiliser.
L’outil pneumatique ne doit pas être modié. Les modications peuvent réduire l’efcacité des mesures de sécurité et augmenter
les risques pour l’opérateur.
Faire réparer l’outil pneumatique seulement et exclusivement par un personnel spécialisé et en utilisant uniquement des pièces
de rechange originales.
INDICATIONS DE SÉCURITÉ POUR LES PERCEUSES PNEUMATIQUES
Contrôler si la plaque d’identication est lisible; si besoin est, se procurer une plaque de remplacement chez le fabricant.
• Des pièces peuvent être projetées à haute vitesse en cas de rupture de l'outil de coupe ou de la pièce travaillée.
L’opérateur et le personnel préposé à la maintenance doivent être en mesure de gérer physiquement le poids et la puissance de
l’outil pneumatique.
Il est important d’être prêts à réagir en cas de mouvements soudains de l’outil pneumatique dus au blocage ou à la rupture
de l’outil de coupe. Tenir fermement l’outil pneumatique et placer le corps et les bras dans une position apte à compenser ces
mouvements. Ces mesures peuvent prévenir les lésions.
• L’outil pneumatique peut se bloquer si:
- L’outil pneumatique est surchargé
15
NOTICE D'UTILISATION ET INSTRUCTIONS
FR
- L’outil de coupe reste bloqué dans la pièce travaillée
- L’outil de coupe traverse complètement le matériau traité.
• N’approcher en aucun cas la main du mandrin ou de l’outil de coupe: possibilités de blessures.
• S’assurer que le sens de rotation de la perceuse pneumatique soit approprié à l’outil de coupe utilisé.
En cas d’interruption de l’arrivée d’air ou d’une pression de fonctionnement réduite, arrêter l’outil. Contrôler la pression
d’exercice et remettre en marche lorsque la pression redevient optimale.
En utilisant l’outil de coupe, il est possible que l’opérateur, en accomplissant les activités liées à son travail, éprouvent des
sensations désagréables au niveau des mains, des bras, des épaules et de la zone du cou. Le fait d’adopter une position
confortable, d’éviter les positions incorrectes et de changer de posture peut aider à éviter les gênes et la fatigue.
Attention au fonctionnement prolongé de l’outil pneumatique: une partie ou la totalité de l’outil de coupe peut
devenir chaude. Utiliser des gants de protection.
Risques dérivant des poussières et des fumées: en fonction de la typologie du matériau travaillé, les fumées produites
pendant l’utilisation d’une partie de l’outil pneumatique peuvent causer des pathologies aux personnes. Une analyse
attentive d’hygiène environnementale est nécessaire pour dénir l’attribution correcte du type et du degré de prévention
de l’équipement spécique de protection individuelle à utiliser pour les voies respiratoires.
Pendant l’utilisation de l’outil pneumatique sur la pièce à travailler, le personnel est exposé à des bruits parfois
nuisibles. Une analyse phonométrique est nécessaire pour dénir l’attribution correcte de l’équipement spécique
de protection individuelle de l’ouïe à utiliser.
Si l’analyse effectuée révèle que l’exposition quotidienne aux vibrations générées pendant l’utilisation de l’outil pneumatique
dépasse la valeur limite d’action prévue par la norme en vigueur dans le pays concerné, il est nécessaire d’utiliser des
gants anti-vibrations prévus à cet effet.
Si l’on constate que la peau des doigts est engourdie ou qu’elle blanchit, si l’on ressent des fourmillements ou une douleur,
interrompre l’utilisation de l’outil pneumatique, informer l’employeur et consulter un médecin.
• Ne pas faire rebondir le foret de l’outil sur la pièce travaillée: celui peut causer une augmentation sensible des vibrations.
Tenir l’outil pneumatique de manière non excessivement ferme mais sûre, en tenant compte des forces de réactions nécessaires
de la main.
Ne jamais transporter l’outil pneumatique en le tenant par le tuyau exible.
ÉQUIPEMENTS DE PROTECTION INDIVIDUELLE PRÉVUS LORS DE L’UTILISATION DE L’OUTIL PNEUMATIQUE
Le non-respect des recommandations suivantes peut causer des lésions physiques et/ou des pathologies.
UTILISER SYSTÉMATIQUEMENT DES GANTS DE PROTECTION CONTRE LES
AGENTS PHYSIQUES PENDANT L’UTILISATION DE L’OUTIL PNEUMATIQUE
PORTER SYSTÉMATIQUEMENT DES ÉQUIPEMENTS DE PROTECTION DE L’OUÏE
PENDANT L’UTILISATION DE L’OUTIL PNEUMATIQUE
PORTER SYSTÉMATIQUEMENT DES LUNETTES DE PROTECTION PENDANT
L’UTILISATION DE L’OUTIL PNEUMATIQUE OU PENDANT L’ACTIVITÉ DE
MAINTENANCE
UTILISER SYSTÉMATIQUEMENT DES CHAUSSURES DE SÉCURITÉ
16
ISTRUZIONI PER L’USO
I
NOTICE D'UTILISATION ET INSTRUCTIONS
FR
LEGENDA
a: Touche de mise en marche de la perceuse
b: Filetage d'arrivée d'air 1/4” GAS
c: Inverseur de rotation à levier du mandrin
d: Douille avant
e: Douille arrière
f: Mandrin “ouvrir-fermer”
g: Lubrication huile
Branchement à l’arrivée d’air
Pour une utilisation correcte de l’outil pneumatique, respecter toujours la pression maximum de 6,2 bar mesurée à l’entrée de
l’outil. Alimenter l’outil pneumatique avec de l’air propre et sans condensation (image 2-b). Une pression trop élevée ou la
présence d’humidité dans l’air d’alimentation réduisent la durée des pièces mécaniques et peuvent causer des dommages à
l’outil.
UTILISATION
Mise en marche / Arrêt
Pour mettre l’outil pneumatique en marche, appuyer sur le bouton de mise en marche (image 2-a) en maintenant la pression
pendant l’exécution du travail. En relâchant la touche, l'outil pneumatique s'arrête en moins de 2 secondes.
Contrôler la position de l’inverseur de rotation à levier avant d’actionner l’outil pneumatique de sorte à connaître le sens de
rotation.
Réglage du sens de rotation
L’outil pneumatique prévoit le sens de rotation horaire et antihoraire. Sélectionner le sens de rotation par le biais du levier
d’inversion (image 3-c):
UTILISER DES GANTS ANTI-VIBRATION PENDANT L’UTILISATION DE L’OUTIL
PNEUMATIQUE SUITE À UNE ANALYSE SPÉCIFIQUE EN FONCTION DU NIVEAU
D’EXPOSITION QUOTIDIENNE AUX VIBRATIONS DU SYSTÈME MAIN-BRAS
UTILISER UN MASQUE DE PROTECTION CONTRE LES AGENTS PHYSIQUES
EN FONCTION DES VALEURS RELEVÉES LORS DE L’ENQUÊTE D’HYGIÈNE
ENVIRONNEMENTALE/INDUSTRIELLE
UTILISER UN CASQUE DE PROTECTION
Autres équipements de protection individuelle à utiliser en fonction des valeurs relevées au cours de l’analyse
d’hygiène environnementale/des risques si les valeurs dépassent les limites prévues par les normes en vigueur
CARACTÉRISTIQUES TECHNIQUES
CAPACITÉ MANDRIN
FILETAGE DE LA BROCHE
VITESSE À VIDE
PUISSANCE
FILETAGE D'ARRIVÉE D'AIR
PRESSION MAXIMUM
DIAMÈTRE INT. MINIMUM TUYAU AIR
CONSOMMATION MAXIMUM D'AIR
POIDS
LONGUEUR TOTALE
BRUIT (ISO 15744)
NIVEAU DE PUISSANCE SONORE
NIVEAU DE PRESSION SONORE
VIBRATIONS (ISO 28927)
NIVEAU DE VIBRATIONS
INCERTITUDE
1 ÷ 10 mm
3/8” 24 UNF
1800 rpm
0.44 kW
1/4” GAS Conique
6.2 bar
10 mm
160 l/min
1.2 kg
190 mm
L
WA
= 107.9 dB
L
PA
= 96.9 dB
3.3 m/s
2
K = 1.1 m/s
2
CARACTÉRISTIQUES TECHNIQUES
17
NOTICE D'UTILISATION ET INSTRUCTIONS
FR
“ F ” FORWARD AVANT sens horaire - vue du côté de l’opérateur
“ R ” REVERSE ARRIÈRE sens antihoraire - vue du côté de l’opérateur
Mandrin
Le mandrin est de type auto-serrant. Pour introduire le foret, procéder de la manière suivante:
• Bloquer manuellement la douille arrière du mandrin (image 4-e).
• Tourner manuellement la douille avant dans le sens antihoraire (image 4-d), ouvrir le mandrin jusqu’à l’introduction du foret.
• Introduire le foret souhaité.
• Tourner manuellement la douille avant dans le sens horaire, jusqu'au blocage du mandrin.
Remplacer le foret de la manière suivante:
• Bloquer manuellement la douille arrière du mandrin.
• Tourner manuellement la douille avant dans le sens antihoraire, le foret sera libéré du mandrin.
• Introduire le foret souhaité, tourner manuellement la douille avant dans le sens horaire, jusqu’au blocage du mandrin.
Interrompre systématiquement l’arrivée d’air avant d’effectuer des opérations d’introduction d’outils de coupe ou de faire des
réglages. Cette mesure de prévention empêche la mise en marche accidentelle de l’outil pneumatique.
Lubrication
Pour obtenir un usage optimal, relier l’outil pneumatique à un groupe ltre-lubricateur de ligne à micro-brouillard
“(art. Beta 1919F1/4) réglé à deux gouttes par minute. Dans ce cas, le rendement sera supérieur et l’usure des pièces mécaniques
sera limitée.
En l’absence de lubricateur dans la ligne, introduire périodiquement dans l’outil pneumatique une huile ISO 32 à travers l’orice
d’arrivée d’air (image 5-g).
MAINTENANCE
Les interventions de maintenance et de réparation doivent être effectuées par un personnel spécialisé. Pour ces interventions,
vous pouvez vous adresser au centre des réparations de Beta Utensili S.p.A.
ÉCOULEMENT
L’outil pneumatique, les accessoires et les emballages doivent être envoyés à un centre d’écoulement des déchets, conformément
aux lois en vigueur du pays où vous vous trouvez.
GARANTIE
Cet outil est fabriqué et testé conformément aux normes actuellement en vigueur dans la Communauté Européenne et est couvert
par une garantie de 12 mois pour une utilisation professionnelle et de 24 mois pour une utilisation non professionnelle.
Toutes les pannes dues à un défaut matériel ou de production seront réparées, en ajustant ou en remplaçant les pièces
défectueuses à notre discrétion.
La réalisation d’une ou de plusieurs interventions pendant la période de garantie n’en modie pas la date d’échéance.
La garantie ne couvre pas les problèmes dus à l’usure des composants, à un usage erroné ou incorrect de l’outil, aux ruptures
causées pas des coups et/ou des chutes. La garantie ne s’appliquera pas en cas de modications ou d’altérations de l’outil
pneumatique ou bien si celui-ci est envoyé à l’assistance technique démonté.
Tous les dommages causés aux personnes et/ou aux biens, directs et/ou indirects et de quelque genre ou nature que ce soit, sont
exclus de la garantie.
___________________________________________________________________________________________________
DÉCLARATION DE CONFORMITÉ
Nous déclarons, en en assumant la pleine responsabilité, que le produit décrit est conforme à toutes les dispositions de la Directive
Machines 2006/42/CE et modications et intégrations successives, ainsi qu’à la norme:
• EN ISO 11148-3
Le Fascicule Technique est disponible chez:
BETA UTENSILI S.P.A.
Via A. Volta 18
20845 Sovico (MB)
ITALIE
18
BEDIENUNGSANLEITUNG
DE
BEDIENUNGSANLEITUNG FÜR DRUCKLUFT-BOHRMASCHINEN HERGESTELLT VON:
BETA UTENSILI S.P.A.
Via A. Volta 18,
20845, Sovico (MB)
ITALIEN
Dokumentation Original in ITALIENISCHER SPRACHE verfasst.
Die Sicherheitsanweisungen sorgfältig aufbewahren und dem Bedienerpersonal übergeben.
BESTIMMUNGSZWECK
Das Druckluft-Bohrmaschine ist für die folgenden Anwendungen bestimmt:
• Bohren und Spitzensenken.
• Verwendung auch im Freien, kann Wasser und Luft ausgesetzt werden.
Nicht zulässig sind die folgenden Vorgänge:
• Schneiden und/oder Gewindeschneiden.
Einschrauben und/oder Aufschrauben.
• Unzulässig ist der Gebrauch in explosionsfähiger Arbeitsumgebung.
• Es ist verboten, den Betätigungsknopf mit Klebeband oder Schellen zu blockieren.
SICHERHEIT DES ARBEITSPLATZES
• Mit Vorsicht vorgehen auf Oberächen, die durch den Gebrauch der Maschine glatt bzw. rutschig werden können, und
aufpassen, nicht über die Druckluftleitung zu stolpern.
• Während des Gebrauchs des Werkzeugs in Höhe alle Sicherheitsmaßnahmen treffen, um die Risiken hinsichtlich möglichen
Herunterfallen der Gerätschaften zu beseitigen oder zu reduzieren (zum Beispiel Abgrenzung des Arbeitsbereichs,
angemessene Beschilderung usw.).
Das Druckluftwerkzeug nicht in explosionsfähiger Umgebung verwenden, da sich Funken entwickeln können, die Staub,
Dämpfe oder Gase entammen könnten.
Den Kontakt mit unter Spannung stehenden Geräten vermeiden: das Druckluftwerkzeug ist nicht isoliert und der Kontakt
mit unter Spannung stehenden Teilen kann einen elektrischen Schlag verursachen.
Zur Ermittlung von versteckten Stromleitungen, die entsprechenden Suchgeräte verwenden oder sich an die lokale
Energieversorgungsgesellschaft wenden. Eine Berührung mit elektrischen Leitungen kann zu Bränden oder
Stromschlägen führen. Bei Beschädigung von Gasleitungen besteht Explosionsgefahr. Das Durchtrennen von
Wasserleitungen verursacht schwere materielle Schäden.
Dafür sorgen, dass sich Kinder oder Besucher nicht dem Arbeitsplatz nähern können, wenn Sie mit dem Druckluftwerkzeug
arbeiten. Der Aufenthalt anderer Personen lenkt bei der Arbeit ab, wodurch die Kontrolle über das Druckluftwerkzeug
verloren gehen könnte.
SICHERHEIT DER DRUCKLUFTWERKZEUGE
Den Druckluftstrahl niemals auf sich selbst oder auf andere Personen richten. Die Druckluft kann schwere Verletzungen
verursachen.
Die Anschlüsse und Luftzufuhrleitungen stets überprüfen. Alle Aggregate, Kupplungen und Schläuche sind entsprechend
den technischen Daten hinsichtlich Druck und Luftuss zu installieren. Ein zu niedriger Druck beeinträchtigt den korrekten
Betrieb des Druckluftwerkzeugs; ein zu hoher Druck führt zu Schäden und/oder Verletzungen.
• Die Schläuche nicht biegen oder drücken, keine Lösemittel oder scharfe Kanten verwenden. Schützen Sie die Leitungen vor
Hitze, Öl und drehenden Teilen. Bei Beschädigungen eines Schlauchs ist dieser unverzüglich zu ersetzen. Eine fehlerhafte
Zufuhrleitung kann zu unkontrollierbaren Bewegungen der Druckluftleitung führen. Von der Luft aufgewirbelte Späne oder
WICHTIG! VOR GEBRAUCH DES DRUCKLUFTWERKZEUGS DIESE BEDIE-
NUNGSANLEITUNGEN VOLLSTÄNDIG LESEN. DIE NICHTBEACHTUNG DER
SICHERHEITSVORSCHRIFTEN UND DER BEDIENUNGSANLEITUNGEN KANN
SCHWERE VERLETZUNGEN VERURSACHEN.
ACHTUNG
19
BEDIENUNGSANLEITUNG
DE
Staub können die Augen verletzen. Sicherstellen, dass die Schellen für die Schläuche stets gut befestigt sind.
HINWEISE FÜR DIE SICHERHEIT DES PERSONALS
• Bei der Arbeit mit Druckluftwerkzeugen ist stets mit höchster Vorsicht und Konzentration vorzugehen. Auf keinen Fall mit dem
Druckluftwerkzeug arbeiten, wenn Sie müde sind oder unter Drogen-, Alkohol- oder Medikamenteneinuss stehen.
• Stets die folgenden persönlichen Sicherheitsausrüstungen tragen:
- Schutzbrille
- Sicherheitsschuhe
- Gehörschutz
- Schutzhandschuhe gegen physikalische Einwirkungen
- Vibrationsschutzhandschuhe, zu verwenden nach spezischer Analyse der Tages-Schwingungsbelastung bezüglich
Vibrationen für Hand-Arm
- Schutzmaske gegen physikalische Einwirkungen in Funktion der bei raum- und industriehygienischen Untersuchung
ermittelten Werte
Halten Sie den Körper im Gleichgewicht und suchen Sie einen sicheren Stand. Eine sichere Arbeitsposition und eine korrekte
Körperhaltung erlauben eine bessere Kontrolle über das Druckluftwerkzeug im Falle von unerwarteten Situationen.
Keine weite Kleidung, Armbänder, Armreife und Halsketten tragen. Haare, Kleidung und Handschuhe in Sicherheitsabstand zu
sich drehenden Teilen halten. Weite Kleidung, Schmuck oder lange Haare können sich in den drehenden Teilen verfangen.
Nicht direkt Abluft einatmen und vermeiden, dass sie in die Augen gerät. Die Abluft des Druckluftwerkzeugs enthält Wasser, Öl,
Metallteilchen und Unreinheiten, die gefährlich sind.
KORREKTER GEBRAUCH VON DRUCKLUFTWERKZEUGEN
Zum Blockieren und Stützen des Werkstücks Spannvorrichtungen oder Schraubstöcke verwenden. Halten Sie das Werkstück
weder mit der Hand noch mit dem Körper fest, da Sie sich so in Gefahr bringen könnten.
• Das Druckluftwerkzeug nicht überlasten. Das für die durchzuführende Arbeit geeignete Druckluftwerkzeug verwenden.
Stets die Unversehrtheit der Maschine überprüfen. Verwenden Sie keine Druckluftwerkzeuge deren Start-/Stopp-Schalter
fehlerhaft ist. Ein Druckluftwerkzeug, das weder angehalten noch gestartet werden kann, ist gefährlich und muss repariert
werden.
Trennen Sie das Werkzeug von der Luftleitung, bevor Sie Einstellungen am Gerät durchführen, Zubehörteile auswechseln oder
es nicht benutzen. Mit dieser Maßnahme wird das unbeabsichtigte Einschalten des Druckluftwerkzeugs ausgeschlossen.
Bei Nichtgebrauch der Druckluftwerkzeuge diese außer Reichweite von Kindern aufbewahren. Das Druckluftwerkzeug darf auf
keinen Fall von Personen benutzt werden, die nicht die Bedienungsanleitung gelesen haben.
Das Druckluftwerkzeug sorgfältig überprüfen und sicherstellen, dass die beweglichen Teile des Werkzeugs korrekt funktionieren,
sie nicht klemmen und keine Teile Brüche oder Beschädigungen aufweisen, die den korrekten Betrieb beeinträchtigen könnten.
Lassen Sie die beschädigten Teile vor Verwendung des Druckluftwerkzeugs reparieren.
Die Schneidwerkzeuge stets geschliffen und sauber halten. Die sorgfältig gepegten Schneidwerkzeuge mit geschliffenem
Schneidzubehör blockieren seltener und sind leichter zu bedienen.
Das Druckluftwerkzeug darf nicht verändert werden. Die eventuellen Umänderungen verringern die Sicherheitsmaßnahmen
und erhöhen das Risiko für den Bediener.
Das Druckluftwerkzeug darf ausschließlich von Fachpersonal repariert werden, das nur Original-Zubehörteile verwendet.
SICHERHEITSHINWEISE FÜR DRUCKLUFT-BOHRMASCHINEN
Kontrollieren Sie, dass das Typenschild lesbar ist. Ist dem nicht so, besorgen Sie sich bitte ein neues Typenschild zum
Austausch beim Hersteller.
Sollte das Schneidwerkzeug oder das Werkstück brechen, können die Teile mit hoher Geschwindigkeit herausgeschleudert
werden.
Das Bediener- und Wartungspersonal muss körperlich für den Umgang mit Größe, Gewicht und Leistungsvermögen des
Druckluftwerkzeugs in der Lage sein.
Es ist wichtig, auf unerwartete Bewegungen des Druckluftwerkzeugs wegen der Blockierung oder des Brechens des
Schneidwerkzeugs vorbereitet zu sein. Halten Sie das Druckluftwerkzeug gut fest und bringen Sie Ihren Körper und die Arme in
20
BEDIENUNGSANLEITUNG
DE
eine Stellung, die es zulässt, dass Sie die Bewegung des Werkzeugs kompensieren. Diese Maßnahmen können Verletzungen
verhindern.
• Das Druckluftwerkzeug kann blockieren, wenn:
- Es überlastet wird.
- Das Schneidwerkzeug im Werkstück hängen bleibt.
- Das Schneidwerkzeug über das zu bearbeitende Material geht.
• Bringen Sie niemals die Hand in die Nähe des Bohrfutters oder Schneidwerkzeugs: Sie könnten sich verletzen.
• Überprüfen Sie, dass die Drehrichtung der Druckluft-Bohrmaschine der des verwendeten Schneidwerkzeugs entspricht.
Im Fall einer Unterbrechung der Luftzufuhr oder eines reduzierten Betriebsdrucks ist das Werkzeug auszuschalten. Kontrollieren
Sie den Betriebsdruck und bei optimalem Betriebsdruck das Werkzeug erneut starten.
Nach lang andauernder Benutzung des Druckluftwerkzeugs ist es möglich, dass der Bediener bei der Arbeit durch die extremen
Schwingungen ein Kribbeln in den Händen oder ein unangenehmes Gefühl in Armen, Schultern und im Nackenbereich verspürt.
Eine bequeme Position oder die Haltung ändern helfen diese unangenehmen Ermüdungserscheinungen zu vermeiden.
Achtung: Bei längerem Gebrauch des Druckluftwerkzeugs können ein Teil des Werkzeugs und das Schneidwerkzeug
heiß werden. Verwenden Sie Schutzhandschuhe.
Gefahren aufgrund von Staub und Rauch: Je nach Art des bearbeiteten Materials können die beim Gebrauch des
Druckluftwerkzeugs entstehenden Verarbeitungsrückstände die Gesundheit der Bediener gefährden. Eine angemessene
Raumhygieneuntersuchung ist notwendig, damit Schutztyp und Schutzgrad der spezischen körperlichen Schutzausrüstung
für die Atemwege gewählt werden kann.
Während des Gebrauchs des Druckluftwerkzeugs entwickeln sich Geräusche, die für den Bediener schädigend sein
können. Um die korrekte persönliche Schutzausrüstung (Gehörschutz) festzulegen, muss eine genaue Untersuchung des
Geräuschpegels vorgenommen werden.
Wenn eine spezische Untersuchung ergibt, dass die Tages-Schwingungsbelastung während des Gebrauchs des
Druckluftwerkzeugs den von den geltenden Vorschriften im Benutzerland festgelegten Höchstwert überschreitet, müssen
spezische Vibrationsschutzhandschuhe benutzt werden.
• Wenn Sie merken sollten, dass die Haut der Finger weiß wird oder Taubheitsgefühle und Schmerzen eintreten, ist die Arbeit mit
dem Druckluftwerkzeug sofort einzustellen. Den Arbeitgeber informieren und sich an einen Arzt wenden.
Den Bohrer nicht auf dem Werkstück ruckeln lassen: Dadurch werden die Schwingungen bzw. Vibrationen sehr erhöht.
Halten Sie das Werkzeug sicher aber nicht zu fest in der Hand, da die erforderlichen Reaktionskräfte der Hand zu berücksichtigen sind.
• Das Druckluftwerkzeug niemals durch Ziehen des Schlauchs transportieren.
VORGESCHRIEBENE KÖRPERLICHE SCHUTZAUSRÜSTRUNG WÄHREND DES GEBRAUCHS DES DRUCKLUFTWERKZEUGS
BEI DEM GEBRAUCH DES DRUCKLUFTWERKZEUGS STETS
SCHUTZHANDSCHUHE GEGEN PHYSIKALISCHE EINWIRKUNGEN VERWENDEN
BEI DEM GEBRAUCH DES DRUCKLUFTWERKZEUGS STETS GEHÖRSCHUTZ
TRAGEN
BEI DER ARBEIT MIT DEM DRUCKLUFTWERKZEUG ODER WÄHREND DESSEN
WARTUNG STETS EINE SCHUTZBRILLE TRAGEN
STETS SICHERHEITSSCHUHE VERWENDEN
1 / 1

Beta 1931CD6 Instrukcja obsługi

Kategoria
Elektronarzędzia
Typ
Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla