Fieldmann FZS 2002-E Instrukcja obsługi

Kategoria
Przycinarki do trawy
Typ
Instrukcja obsługi
FZS 2002-E
FZS 2002-E
2
English .................................................................................................................................................. 9 - 20
Čeština .............................................................................................................................................. 21 - 32
Slovenčina ...................................................................................................................................... 33 - 44
Magyarul .......................................................................................................................................... 45 - 56
Polski ................................................................................................................................................... 57 - 68
Русский ................................................................................................................................................ 69 - 81
3
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
FZS 2002-E
4
2
A
BC
5
4
3
AB
1
2
AB
3
FZS 2002-E
6
5 6
7
8
3
2
1
1
2
7
910
11 12
13 14
FZS 2002-E
8
15
9
OPERATING INSTRUCTIONSELECTRIC STRING TRIMMER
ENContents
Electric String Trimmer
INSTRUCTION MANUAL
hank you for your purchase of the electric string trimmer. For your personal safety,
read and understand the Instruction Manual before using. Keep the Instruction
Manual in a safe place for future reference.
CONTENTS
PICTORIAL APPENDIX .................................................................................................................... 3
GENERAL SAFETY INSTRUCTIONS .......................................................................................... 10
Important Safety Instructions
Package
Instruction Manual
SYMBOLS AND WARNINGS ON MACHINE ....................................................................... 11
MACHINE DESCRIPTION AND ITEMS DELIVERED ........................................................... 12
SAFETY INSTRUCTIONS ................................................................................................................ 12
APPLICATION ................................................................................................................................... 13
ASSEMBLY INSTRUCTIONS .......................................................................................................... 14
OPERATION ...................................................................................................................................... 15
STRING TRIMMER STARTUP ........................................................................................................ 16
MAINTENANCE ............................................................................................................................... 17
TECHNICAL SPECIFICATIONS ................................................................................................... 17
DECLARATION OF CONFORMITY .......................................................................................... 18
DISPOSAL ......................................................................................................................................... 19
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
FZS 2002-E
10EN General safety instructions
1. GENERAL SAFETY INSTRUCTIONS
Important safety warnings
Unpack the product carefully and be sure not to throw away any part of the package before
having found all components of the product.
Keep the product in a dry place out of reach of children.
Read all cautions and instructions. The failure to adhere to warning cautions and instructions
may result in an accident, fire and/or a serious injury.
Packaging
The product is placed in a package preventing damage during transport. This package is a raw
material therefore it can be handed-over for recycling.
Instructions for use
Before beginning to work with the machine, read the following safety rules and instructions for
use. Familiarize with operating elements and the proper use of the device. Keep the manual in a
safe place for future reference. We recommend keeping the original package including the inner
packaging materials, cash voucher and guarantee card for a period of warranty at minimum.
For a case of transportation, pack the machine into the original box from the manufacturer,
thus ensuring a maximum protection of the product during a possible transport (e.g. moving or
sending into a service station).
Note: If you hand the machine over to next persons, hand it over together with the manual.
Adherence to the attached instructions for use is a precondition for the proper use of the
machine. The operation manual includes also instructions for operation, maintenance and
repairs.
The manufacturer does not take any responsibility for accidents or damages
resulting from the failure to adhere to this manual.
11
OPERATING INSTRUCTIONSELECTRIC STRING TRIMMER
ENSymbols and warnings on machine
2. SYMBOLS AND WARNINGS ON MACHINE
Keep other persons inasafe
distance off the tool!
Do not operate the tool if raining
or in wet conditions.
Read the Instruction Manual
attentively before operating the tool.
Warning!
Alwayswear eyeprotection.
FZS 2002-E
12EN Machine description and items delivered | Safety instructions
3. MACHINE DESCRIPTION AND ITEMS
DELIVERED
Machine Description (See fig. 1)
Trigger
Handle
Adjustable second handle
Second handle locking bolt
Telescopic boom to adjust the working height
Telescopic boom locking bolt
Trimmer head
1 -
2 -
3 -
4 -
5 -
6 -
7 -
Safeguard
String
String spool
Line-cutting edge
Cable retainer
Mains plug
Edge guide wheels
8 -
9 -
10 -
11 -
12 -
13 -
14 -
Items Delivered
Remove all contents from the box and inspect to ensure no damage was incurred during
shipping, and that the items listed below are included.
Electric garden string trimmer
Safeguard
Handle with a locking bolt
Warranty card
Instruction Manual
Should the components be missing or damaged, contact the dealer of the machine.
4. SAFETY INSTRUCTIONS
WARNING! Keep all safety instructions when operating the electric tool. For your as well as
other persons´ safety, read and understand the Instruction Manual attentively prior to use of
the tool. Keep the Instruction Manual in a safe place for future reference.
When operating the tool, wear the safety glasses.
When operating the tool, wear the safety gloves.
Do not expose the tool to rain or moisture.
Read the Instructions Manual attentively and get familiarized with all control features and their
functions.
Do not allow children or untrained individuals to use the tool.
Keep all bystanders, children and pets away from the trimmer; the grass which is cut
and dispersed may contain stones and debris. Should other persons be in your close vicinity,
particularly the children, stop mowing.
13
OPERATING INSTRUCTIONSELECTRIC STRING TRIMMER
ENSafety instructions | Application
When operating the tool, keep other persons, children or animals at the minimum distance of
4,5 m from the string trimmer.
Operate the tool only by daylight or by appropriate artificial lighting.
Prior to use of the tool or after any impact, always check the string trimmer for damage or
wear. Repair the string trimmer, if necessary. Do not operate the string trimmer if the cutting
string is not properly fixed or is damaged.
Always check whether the tool is in a good condition. If not, it can endanger the user.
When operating the trimmer, always use all the safeguards.
Do not operate the trimmer in case the safeguards are damaged.
Clear the work area before each use. Remove all objects such as stones, metal pieces, roots,
other hard objects and plastic bags, nylon ropes and other objects that cannot be cut.
Prior to startup of the trimmer, make sure the nylon string does not touch stones or debris.
Do not place your arms and legs to the cutting area; especially not when starting up the
motor.
Protect yourselves from injuries caused by the trimmer string. After you fixed a new cutting
string, return the string trimmer to the standard operation position.
Do not use damaged or cracked cutting elements.
Do not use spare parts or accessories not delivered or not recommended by the string
trimmer manufacturer.
Always clean the debris from the ventilation slots.
Do not carry the trimmer with your finger on the trigger; you will avoid the accidental startup
of the machine.
Keep the balanced and safety position when mowing.
Clean the work area from wires, stones and debris.
Do not cut hard objects. Imminent danger of an injury or damage of the trimmer.
WARNING! Cutting elements keep rotating for a certain time after the motor was
switched off!
Do not attempt to stop the cutting element (nylon string) by your hands. Let it stop by itself.
Do not use the string trimmer to cut grass which is not in contact with the ground i. e. grass
on low walls, rockeries, etc.
Do not cross the roads or gravel paths with the string trimmer still running.
5. APPLICATION
The electric string trimmer is intended for grass mowing.
Use for other purposes is strictly forbidden.
The string trimmer is intended for domestic use only.
FZS 2002-E
14EN Assembly instructions
6. ASSEMBLY INSTRUCTIONS
For Your Safety
WARNING! Prior to any adjustments, disconnect the plug from the power supply source.
Select the appropriate operation position (Fig. 2)
You can select one out of three operation positions (A, B, C):
The operation position A is intended for grass mowing. The wheel assembly can be used at
your discretion.
The operation position B is intended for edge mowing. Use the wheel assembly.
The operation position C is also intended for edge mowing. Do not use the wheel assembly.
Safeguard Attachment (Fig. 3)
Remove two screws (1) from the string trimmer casing (Fig. 3/B).
Place the motor cover so that the string head carrier faces upwards (Fig. 3/A).
Slide the safeguard (2) over the motor cover (Fig. 3/A).
Insert two screws back to the trimmer head through the safeguard openings and tighten
them, see the figure 3/B.
Check the nylon strings (Fig. 4)
Prior to the first startup of the electric string trimmer, check whether the nylon strings touch
the cut-off blade or whether it is by-passed. If the strings are not long enough (1), press the
button (2) and pull out the nylon string to have the sufficient length. (See the figure 4/A)
The extended nylon string will be automatically cut by the cut-off blade to the appropriate
length as soon as you turn the string trimmer on.
The nylon string gets shorter or worn during the string trimmer operation. To extend the nylon
string automatically or to move the string, tap the spool button (3) slightly to the ground (the
string trimmer is ON), see the figure 4/B.
You should repeat the above mentioned steps several times prior to start working with the string
trimmer in order to be sure the trimmer works properly and to get familiarized with the trimmer
control elements. Start off slowly, when you have gained experience, you will be able to use the
string trimmer to its full potential.
Replacement of the Nylon String Spool
Turn the machine upside down.
Press the locking latches on the string head cover, as depicted in figure 5, pull the cover and
remove it.
15
OPERATING INSTRUCTIONSELECTRIC STRING TRIMMER
ENAssembly instructions | Operation
Remove the worn spool from the trimmer and dispose the remaining string on the spool.
Pass the string end through the spool neck, see figure 6. Make sure the spring is securely
placed under the spool. Place the spool to the cutting head and pull the string through the
opening in order to create sufficient tension, see figure 6.
Note: Be careful, the head contains the spring which can get easily lost. Make sure the
spring is securely placed in its position.
Press the spool slightly downwards to the spring while turning it, until it gets engaged. Check
that the string is not snagged under the spool.
Click the cover shut back in the position, place the string trimmer in the operation position and
turn it on. Within a few seconds, you will hear that the nylon string is cut to the appropriate
length. If not, tap slightly with the trimmer head to the ground in order to release the
appropriate length of the string.
Adjustable Handle Attachment (Fig. 7)
Turn the handle knob (3) and pull out the screw (2) of the adjustable handle (1).
Insert the adjustable handle (1) to the trimmer handle.
Insert the screw (2) and the handle knob (3) back and tighten the knob slightly.
Prior to final tightening of the knob (3), turn the adjustable handle (1) to the desired angle.
When the adjustable handle (1) is in the required position, tighten the handle knob finally (3).
Edge Guide Wheel Assembly (Fig. 8)
WARNING!
The edge guide wheel assembly (1) may or need not be used to cut grass
(operation position A).
The edge guide wheel assembly (1) must be used to cut edges (operation position B).
The edge guide wheel assembly (1) must not be used to cut grass (operation position C).
While fixing the edge guide wheel assembly (1) to the guide (2) of the handle, you will hear a
click when the lock gets engaged on one side.
remove the edge guide wheel assembly from the trimmer, press the „PUSH“ button and pull
out the assembly from the guide (2) of the trimmer handle.
7. OPERATION
WARNING! RISK OF INJURY! There is an imminent risk of injury in case the string trimmer
does not turn off after you have released the trigger. Never override the safety devices (e.g. by
strapping down one of the start buttons).
FZS 2002-E
16EN Operation | String trimmer startup
Adjustment of Trimming Head Angle (Fig. 9)
The trimmer head can be set to 4 different operation positions.
Press the „PUSH“ button by one hand and turn the trimmer head to the desired position by
other hand. The „PUSH“ button will lock the head automatically.
Adjustment of Handle Length and Angle (Fig. 10)
Turn the locking sleeve (A) in the „UNLOCK“ direction and extend the upper part of the handle
to the desired length. Then, turn the locking sleeve (A) in the „LOCK“ direction and tighten
firmly.
Pull the locking screw (B) upwards in the direction „1“. Turn the upper part of the handle in the
direction „2“ to the operation position 0°, 90°, 180°. • The operation position 0° is intended
for grass mowing only. • The operation positions 90° and 180° are intended for edge
mowing only.
Adjustment of Adjustable Handle Angle (Fig. 11)
Press the lock button and turn the adjustable handle to the desired position.
There are 7 operation positions available.
Then, tighten the lock button firmly.
Adjustment of Edge Guide Wheel Assembly Angle (Fig. 12)
Release the lock knob and turn the edge guide wheel assembly to the desired angle.
The positions „1“, „2“, „3“ are the available operation positions.
In case you do not use the edge guide wheel assembly, you can either remove it from the
trimmer or set it to the position „4“.
Safeguard Adjustment (Fig. 13)
Position „1“ is the parking position; position „2“ is the operation position.
Turn the safeguard (A) to the desired position, until the lock gets engaged.
8. STRING TRIMMER STARTUP (Fig. 14)
Switching the Trimmer ON
Push and hold the safety button (A), and then press the trigger (B) on the handle.
Release the safety button (A).
Switching the Trimmer OFF
Release the trigger (B) on the handle.
17
OPERATING INSTRUCTIONSELECTRIC STRING TRIMMER
ENString trimmer startup | Maintenance | Technical specifications
WARNING! RISK OF INJURY! Cutting elements keep rotating for a certain time after the
motor was switched off. • Do not attempt to stop the cutting element (nylon string) by your
hands. Let it stop by itself.
Note: Recommendation: When cutting grass in the operation position A, set the angle
between the cutting blades and ground to ca. 10°, you will reach the optimum performance
of the trimmer. When operating, you can hold the string trimmer and move it from left to right
and consequently from right to left. You will reach the optimum performance of the electric
string trimmer. (Fig. 15).
9. MAINTENANCE
The trimmer string can dry out in the process of time. To keep the nylon string in a perfect
condition, store the spare pre-wound spools or loose string in a plastic bag with a spoon of
water.
clean the string trimmer, remove the battery and use a mild soap and a damp cloth only.
Do not immerse the trimmer in water, nor hose it down. Avoid any liquid to get inside the
string trimmer. Do not use pressurized water when cleaning the machine.
The line-cutting blade on the safeguard side can get blunt. Regular sharpening of the blade
with a file is recommended.
10. TECHNICAL SPECIFICATIONS
Voltage / frequency 230-240V~/50Hz
Input power 500W
No-load speed 11000 rpm
Cutting width 300mm
Instructions Manual - language version only.
FZS 2002-E
18EN Declaration of conformity
11. DECLARATION OF CONFORMITY
Product/Name: ELECTRIC STRING TRIMMER / FIELDMANN
Type/Model: FZS 2002-E …......................................................................................……………….. 230V,500W
The product complies with the following directives:
The Directive of the European Parliament and the Council No. 2006/95/EC dated
12 December 2006 on the harmonisation of the laws of Member States relating to electrical
equipment designed for use within certain voltage limits.
The Directive of the European Parliament and the Council No. 2004/108/EC dated
15 December 2004 on the harmonisation of the laws of the Member States relating to
electromagnetic compatibility and repealing Directive No. 89/336/EEC.
The Directive of the European Parliament and the Council No. 2006/42/EC dated
17 May 2006 on machinery, and amending Directive No. 95/16/EC.
The Directive of the European Parliament and the Council No. 2002/95/EC dated
27 January 2003 on the restriction of the use of certain hazardous substances in electrical
and electronic equipment.
a normami:
EN 60335-1:2002+A11:2004+A1:2004+A12:2006+A2:06+A13:08
EN 60335-2-91:2003
EN 786:1996+A2:2009
EN 50366:2003+A1:2006
EN 60335-1:2002FPRAF:09PREN 60335-2-91:2007+FPRAA:09
EN 55014-1:2000/A1:2001/A2:2002
EN 55014-2:1997+A1:2001
EN 61000-3-2:2000/A2:2005
EN 61000-3-3:1995/A1:2001/A2:2005
CE Certification: ............................................................................................................................................... 11
FAST ČR, a.s. is authorised to act on behalf of the manufacturer.
Manufacturer:
FAST ČR, a.s.
Černokostelecká 2111, 100 00 Praha 10, Česká republika
Tax ID:: CZ26726548
In Prague, 07/04/2011
Name: Zdeněk Pech
Chairman of Board Signature and stamps:
19
OPERATING INSTRUCTIONSELECTRIC STRING TRIMMER
ENDisposal
12. DISPOSAL
The machine and its accessories are made of various materials, e.g. of metal and plastics.
Hand-over damaged components to sorted waste. Get yourselves informed at a respective
authority.
INSTRUCTIONS AND INFORMATION ON DISPOSAL OF USED PACKAGING.
Put any used package material to the place determined by the municipality for waste
disposal.
DISPOSAL OF USED ELECTRIC AND ELECTRONIC EQUIPMENT
This symbol on products or accompanying documents means that used
electric or electronic products must not be put to ordinary municipal waste.
Hand over such products to determined collection points for proper disposal,
restoration and recycling. Alternatively, in some countries of the European
Union or other European countries you can return your products to your local
dealer when you buy an equivalent new product. By dutiful disposal of this
product you can preserve precious natural resources and you help prevent any
potential adverse effects on the environment and human health which could
be the results of wrong waste disposal. Ask your local authority or the nearest
collection point for additional details. In case of improper disposal of this waste
kind penalties can be imposed in accordance with national regulations.
For companies in the European Union countries
Should you want to dispose of electric and electronic devices, ask your dealer
or vendor for necessary information. Disposal in other countries outside the
European Union. Should you want to dispose of this product, ask your local
authorities or your dealer for necessary information about disposal method.
This product fulfils all basic requirements of the EU directives that apply to it.
Text, design and technical specifications can change without prior notice and we reserve
the right for their change.
FZS 2002-E
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82

Fieldmann FZS 2002-E Instrukcja obsługi

Kategoria
Przycinarki do trawy
Typ
Instrukcja obsługi

w innych językach