Saeco BRI958/00 Instrukcja obsługi

Lumea

BRI958, BRI957,

BRI955

1

2a

7

36

4

14

15

16

BRI955 (2a, 2b, 2e)

BRI957, BRI958 (2a, 2b, 2c, 2d)

2d

3

4

2e

3

4

1

8

12

11

9

10

17

18

2c

3

4

2b

3

4

5

13

Suitable skin tones / Vhodné odstíny pleti /

Prikladne nijanse kože / Megfelelő bőrtónusok

/ Odpowiednie odcienie skóry / Tonuri de piele

potrivite / Primerni odtenki kože / Vhodné

odtiene pokožky / Подходящи тонове на

кожата /

Suitable body hair colors / Vhodné barvy

chloupků / Pogodne boje dlačica / Alkalmas

testszőrzetszínek / Odpowiednie kolory włosów

na ciele / Culori adecvate ale părului de pe corp /

Primerne barve dlačic / Vhodné farby telesného

ochlpenia / Подходящ цвят на телесно

окосмяване

Suitable skin tones Suitable body hair colors

BRI958-BRI957-BRI955_ONYX_3000.058.8021.1_SkintoneTable_A5_fc.indd 1BRI958-BRI957-BRI955_ONYX_3000.058.8021.1_SkintoneTable_A5_fc.indd 1 22-09-20 17:0222-09-20 17:02

English 6

Čeština 36

Hrvatski 66

Magyar 96

Polski 126

Română 160

Slovenščina 191

Slovensky 221

Български 252

English

6

English

Contents

Welcome______________________________________________________________________________________________ 6

Device overview_______________________________________________________________________________________ 7

Contraindications ____________________________________________________________________________________ 7

Important safety instructions_________________________________________________________________________ 10

How IPL works________________________________________________________________________________________ 14

Recommended treatment schedule_________________________________________________________________ 15

What to expect________________________________________________________________________________________ 15

How to use your Lumea Series 9000________________________________________________________________ 16

Learning more about your Lumea Series 9000______________________________________________________ 21

Charging_______________________________________________________________________________________________ 21

Attachments__________________________________________________________________________________________ 21

SmartSkin sensor_____________________________________________________________________________________ 23

Selecting the light intensity___________________________________________________________________________ 24

Two treatment modes: Stamp & Flash and Slide & Flash___________________________________________ 25

Treatment time per area______________________________________________________________________________ 26

Using your Lumea Series 9000 before and after tanning___________________________________________ 27

Traveling with the device_____________________________________________________________________________ 27

After use_______________________________________________________________________________________________ 27

Troubleshooting______________________________________________________________________________________ 29

Warranty and support________________________________________________________________________________ 32

Recycling______________________________________________________________________________________________ 32

Technical specifications______________________________________________________________________________ 33

Electromagnetic compatibility - Compliance information___________________________________________ 33

Explanation of symbols_______________________________________________________________________________ 33

Welcome

Welcome to the beauty world of Lumea Series 9000! You are only a few

weeks away from silky-smooth skin.

Philips Lumea Series 9000 uses Intense Pulsed Light (IPL) technology,

known as one of the most effective methods to continuously prevent hair

regrowth. In close collaboration with skin experts we adapted this light-

based technology, originally used in professional beauty salons, for easy

and effective use in the comfort of your home. Philips Lumea Series 9000

is gentle and offers convenient and effective treatment at a light intensity

that you find comfortable. Unwanted hairs are finally a thing of the past.

Enjoy the feeling of being hair-free and look and feel amazing every day.

Philips Lumea Series 9000 has been designed and developed for women,

but may be suitable for use by men.

To fully benefit from the support that Philips offers, register your product

and find further information about your product at

www.philips.com/support to find our experts' advice, tutorial videos and

FAQs and make the most of your Lumea Series 9000.

Note: Keep these instructions with your product at all times.

7

English

Device overview

1 Light exit window with integrated UV filter

2 Attachments

a Body attachment

b Facial attachment

c Bikini attachment (BRI957, BRI958)

d Underarm attachment

(BRI957, BRI958)

e Precision attachment

(BRI955 )

3 SmartSkin sensor

4 Integrated safety system

5 Reflector inside the attachment

6 Electronic contacts

7 Opening for electronic contacts

8 Flash button

9 On/off button

10 Confirmation button

11 Toggle buttons

12 Intensity lights

13 Setting advice button

14 'READY to flash' light

15 Air vents

16 Device socket

17 Adapter

18 Small plug

19 Luxurious pouch (not shown)

20 Cleaning cloth (not shown)

Contraindications

Conditions

Never use the device:

-

If you have skin type VI (you rarely to never sunburn, very dark

tanning). In this case you run a high risk of developing skin

reactions, such as hyperpigmentation and hypopigmentation,

strong redness or burns.

-

If you are pregnant or breastfeeding as the device was not tested

on pregnant or breastfeeding women.

-

If you have any active implants such as a pacemaker,

neurostimulator, insulin pump etc.

8

English

Medications/History

Never use the device if you take any of the medications listed

below:

-

If your skin is currently being treated with or has recently been

treated in the past week with Alpha-Hydroxy Acids (AHAs), Beta-

Hydroxy Acids (BHAs), topical isotretinoin and azelaic acid.

-

If you have taken any form of isotretinoin Accutane or Roaccutane

in the last six months. This treatment can make skin more

susceptible to tears, wounds and irritations.

-

If you are taking photosensitizing agents or medications, check

the package insert of your medicine and never use the device if it

is stated that it can cause photo-allergic reactions, photo-toxic

reactions or if you have to avoid sun when taking this medicine.

-

If you take anticoagulation medications, including heavy use of

aspirin, in a manner which does not allow for a minimum 1-week

washout period prior to each treatment.

Never use the device:

-

If you have received radiation therapy or chemotherapy within the

past 3 months.

-

If you are on painkillers which reduce the skin's sensitivity to heat.

-

If you take immunosuppressive medications.

Pathologies/Disorders

Never use the device:

-

If you have diabetes or other systemic or metabolic diseases.

-

If you have congestive heart disease.

-

If you have a disease related to photosensitivity, such as

polymorphic light eruption (PMLE), solar urticaria, porphyria etc.

-

If you have a history of collagen disorder, including a history of

keloid scar formation or a history of poor wound healing.

-

If you have epilepsy with flashlight sensitivity.

9

English

-

If your skin is sensitive to light and easily develops a rash or an

allergic reaction.

-

If you have a skin disease such as active skin cancer, you have a

history of skin cancer or any other localized cancer in the areas to

be treated.

-

If you have a history of vascular disorder, such as the presence of

varicose veins or vascular ectasia in the areas to be treated.

-

If you have any bleeding disorder.

-

If you have a history of immunosuppressive disease (including HIV

infection or AIDS).

Skin conditions

Never use the device:

-

If you have infections, eczema, burns, inflammation of hair

follicles, open lacerations, abrasions, herpes simplex (cold sores),

wounds or lesions and haematomas (bruises) in the areas to be

treated.

-

On irritated (red or cut), sunburned, recently tanned or

fake‑tanned skin.

-

On the following areas: On moles, freckles, large veins, darker

pigmented areas, scars, skin anomalies without consulting your

doctor. This can result in a burn and a change in skin color, which

makes it potentially harder to identify skin-related diseases.

-

On the following areas: warts, tattoos or permanent make‑up.

Location/areas

Never use the device on the following areas:

-

Around the eyes and near the eyebrows.

-

On the lips, nipples, areolas, labia minora,

vagina, anus and the inside of the nostrils and

ears.

-

If you have had surgery in the areas to be

treated in the last three weeks.

10

English

-

Men must not use the device on the face and

neck including all beard-growing areas, nor on

the whole genital area.

-

On areas where you use long-lasting

deodorants. This can result in skin reactions.

-

Over or near anything artificial like silicone

implants, subcutaneous injection ports (insulin

dispenser) or piercings.

Note: This list is not exhaustive. If you are not sure

whether you can use the device, we advise you to

consult your doctor.

Important safety instructions

Warnings

-

Please read and follow these instructions to optimize the use of

the device and prevent/ minimize the risk of injury, skin reactions

and side effects.

-

Before you use Lumea Series 9000, you should clean your skin

and make sure it is hair‑free, entirely dry and free from any lotion

or gel.

-

Keep the device and the adapter dry.

-

This device is not washable. Never immerse the device in water

and do not rinse it under the tap.

-

Water and electricity are a dangerous combination. Do not use

this appliance in wet surroundings (e.g. near a filled bath, a

running shower or a filled swimming pool). Moisture can damage

the device and lead to a potential safety hazard.

-

Always check the device before you use it. Do not use the device

or adapter if it is damaged. Always replace a damaged part with

one of the original type.

11

English

-

If the device or adapter is broken or damaged, do not touch any

inner part to avoid electric shock.

-

Do not use the device if the UV filter of the light exit window

and/or attachment is broken, as safe operation cannot be

guaranteed under these circumstances.

-

Do not attempt to open or repair your device or change the non-

replaceable batteries. Opening Philips Lumea Series 9000 may

expose you to dangerous electrical components and to pulsed

light energy, either of which may cause bodily and/or eye injury.

-

Always return the device to a service center authorized by Philips

for examination or repair. Repair by unqualified people could

cause an extremelyhazardous situation for the user.

-

No modification of this equipment is allowed. Do not modify,

override or cut off any part of the device (e.g. battery, adapter or

the cord), as this causes a hazardous situation.

-

Do not look at the flash while using the device. Use the device in a

well-lit room so that the light is less glaring to your eyes. While not

necessary for safety, you may wear sunglasses or goggles for your

convenience if you find the light uncomfortable or too bright.

-

Do not treat the same skin area more than once during a session.

This may increase the risk of skin reactions.

-

For hygienic reasons, the device should only be used by one

person.

-

Do not use hair removal creams in the area (to be) treated with

the device, as chemicals may cause skin reactions.

-

Do not use any pencil or pen to mark the areas to be treated. This

may cause burns on your skin.

-

The device can be stored at a temperature between -25°C and

70°C. Charge and use the device at a temperature between 5°C

and 35°C. The device will not work properly outside of this

temperature range. This may cause burns on your skin.

12

English

-

Only use thisproduct for its intended purpose and follow the

general and battery safety instructions as described in this user

manual. Any misuse can cause electric shock, burns, fire and other

hazards or injuries.

-

Hair removal by intense pulsed light sources can cause increased

hair growth in some individuals. Based upon currently available

data, the highest risk groups for this response are females of

Mediterranean, Middle Eastern and South Asian heritage treated

on the face and neck.

-

If you experience skin irritation or skin redness after treatment,

wait until it disappears before applying any product to your skin. If

you experience skin irritation after applying a product to your skin,

wash it off with water. If you still get skin reactions, stop using the

device and consult your doctor.

-

If shaving, epilating or waxing causes skin irritation, we advise you

not to use the device until skin irritation has disappeared.

-

This device is not intended for use by persons with reduced

physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction

concerning use of the device by a person responsible for their

safety.

-

Children should be supervised to ensure that they do not play

with the device. Supervision is required to avoid potential risks

such as exposure to the light output, electrocution, strangulation

from the cables or choking on the attachments.

-

Tanning with natural or artificial sunlight might influence the

sensitivity and color of your skin. Perform a skin test to determine

the appropriate light intensity setting.

-

After each treatment, wait at least 48 hours before tanning to

ensure any skin reaction has been resolved.

-

If you notice a skin tone change since the last treatment, we

advise you to perform a skin test and to wait 24 hours before your

next treatment.

13

English

-

Always check the device before you use it. Make sure that the

SmartSkin sensor window is clean when using the device, to avoid

improper operation (see 'D Clean & store after treatment').

-

The adapter, light exit window and the filter of the attachments

can become very hot ( >210°C/>410°F ) during usage. Always let

the adapter, the light exit window as well as the filter and inner

parts of the attachments cool down before you touch them.

-

This device has a detachable power supply unit that is IEC

60601-1 and IEC 60950-1 class II compliant. Only use the adapter

provided with this device. Do not use an extension cord. The

reference number (AD2069x20020HF) can be found on your

device. The 'x' in this number refers to the plug type for your

country.

-

Never leave the product unattended when it is plugged in.

-

Always unplug the product when it is fully charged.

-

Do not expose the device to direct sunlight or to high

temperatures (near hot stoves, in microwave ovens or on

induction cookers). Batteries may explode if overheated.

-

If the battery is damaged or leaking, avoid contact with skin or

eyes. If this occurs, immediately rinse well with water and seek

medical attention.

-

If the device behaves in a different way during your normal routine

(e.g. abnormal smell or vibrations, longer charging time) stop using

and charging your device and contact customer support for help.

-

Follow the recommended treatment schedule. Increasing the

frequency, especially in the initial phase, can increase the risk of

skin reactions.

14

English

How IPL works

1

With Intense Pulsed Light technology, gentle pulses of light are applied to

the skin and absorbed by the hair root. The lighter the skin and the darker

the hair, the better the pulses of light are absorbed.

2

The pulses of light stimulate the hair follicle to go into a resting phase. As a

consequence, the hair sheds naturally and hair regrowth is prevented.

3

The cycle of hair growth consists of different phases. IPL technology is only

effective when the hair is in its growing phase. Not all hairs are in the

growing phase at the same time. This is why we recommend you to follow

the initial treatment phase (4 treatments, every treatment 2 weeks apart)

and then the follow‑up treatment phase (touch‑ups every 4 weeks) to make

sure all hairs are effectively treated in the growing phase.

Tip: To assure long lasting hair removal, touch-ups every 4 weeks are

recommended.

Suitable body hair colors

Treatment with Lumea Series 9000 is not effective if you have light blond,

grey, red or white hairs as hairs with these colors do not absorb enough

light.

Note: To check if your body hair color allows usage of the device, consult

the hair color table on the foldout page.

15

English

Recommended treatment schedule

Initial phase

To achieve effective hair reduction, follow the initial treatment schedule.

Initial treatment schedule

For the first 4 treatments, use Lumea Series 9000 once every two weeks to

ensure that all hairs are treated.

-

Treat yourself within 3 days before or after the planned treatment date.

-

If you have not treated yourself within 3 days before or after the

planned treatment date, restart the initial phase. Plan in 4 treatments,

one treatment every two weeks.

Note: If you do not restart the initial phase, you may not see effective hair

reduction.

Note: Replacing one of the IPL treatments with another hair removal

method (waxing, epilating, etc.) will not help to reach the desired hair

reduction.

If you want to remove hairs in between the Lumea Series 9000 treatments,

you can use your normal hair removal method (excluding hair removal

creams).

Touch-up phase

After the initial phase (4 treatments), we recommend touch-ups every 4

weeks.

Touch-up treatment schedule

Treat yourself every 4 weeks. Repeat this 8 times to achieve effective hair

reduction. This is to maintain results and enjoy smooth skin for months.

-

We advise you to treat yourself within 4 days before or after the planned

treatment date.

-

The results may vary based on your individual hair regrowth and also

across different body areas.

-

If you have completed the touch-up phase and you see the need to

continue treatment (hair starts coming back), we advise you to restart

the initial phase.

Tip: Mark the treatment schedule on your calendar to remind yourself of

the planned treatments.

Note: Using the device more often does not enhance the effectiveness.

What to expect

After initial phase

-

Afterthe first treatment, it can take 1 to 2 weeks for the hairs to fall out.

In the first weeks following the initial treatments, you still see some hairs

growing.These are likely to be hairs that were not in their growing phase

during the first treatments.

16

English

-

After 2-3 treatments, you should see a noticeable reduction in hair

growth. However, to effectively treat all hairs, it is important to keep on

treating according to the recommended treatment schedule.

-

After 4 treatments, you should see a significant reduction of hair growth

in the areas that you treated with Lumea Series 9000. A reduction of

hair density should be visible as well.

During touch-up phase

-

Keep on treating with frequent touch-ups (every 4 weeks) to maintain

the result.

How to use your Lumea Series 9000

A Remove hair & clean your skin

1 Remove hair before every treatment as long as hair is still visible. You

can either shave, epilate or wax. Make sure you start to treat before new

hair is visible on your skin. If you choose to wax, wait 24 hours before

you use Lumea Series 9000.

2 Clean and dry your skin. Make sure that it is free from any lotion or gel.

B Test skin 24 hrs before treatment

1 Test your skin to find the correct light setting:

-

For every new body area.

-

After recent tanning.

17

English

2 Select the correct attachment to test your skin (see 'Attachments').

3 Press the on/off button to turn on the device.

4 Choose an area for your skin test.

5 Press the device firmly onto your skin and hold it in place.

The integrated safety system prevents unintentional flashingwithout full

skin contact.

6 Confirm that the 'READY to flash' light lights up white to ensure that

there is full contact with your skin.

-

If the 'READY to flash' light is orange, your skin is too dark to treat. Try

Lumea Series 9000 on a lighter body area.

18

English

7 Try each setting on your skin if comfortable:

-

When the 'READY to flash' light is white, press the flash button on the

handle once, to treat one spot with setting ➀

The device makes a soft popping sound. The flash gives you a warm

sensation.

 • You will see a flash of light •

Note: You can toggle through the light intensity settings by pressing the

toggle button.

-

Move to next area. Treat one spot with setting ➁

1

2

3

4

5

-

Move to next area. Treat one spot with setting ➂

-

Move to next area. Treat one spot with setting ➃

-

Move to next area. Treat one spot with setting ➄

24 hrs

8 Wait 24 hours.

9 Check your skin. The highest setting that...

-

still felt comfortable and

-

did not show a skin reaction (e.g. redness, irritation, rash)

... is the setting to start the treatment with.

19

English

C Treatment

IMPORTANT: First finish section A (Remove hair & clean your skin) and B

(Test skin 24 hrs before treatment).

1 Connect the power adapter to the device and plug into a power outlet

or charge the device and use cordless.

2 Press the on/off button to turn on the device.

3 Choose the setting you selected after the skin test (section B, step 9).

4 Press the device firmly onto your skin and hold it in place. The 'READY to

flash' light should light up white.

5 Press the flash button to release a flash on your skin. The flash treats the

skin in that spot.

The device makes a soft popping sound. The flash gives you a warm

sensation.

After each flash, it takes up to 3.5 seconds until the device is ready to

flash again. You can release a flash when the 'READY to flash' light lights

up white.

20

English

6 Move the device to the next spot, close to, but not overlapping the

previous spot. Make sure that you flash the same area only once.

7 Continue until you have treated the full area. There are two treatment

modes (see 'Two treatment modes: Stamp & Flash and Slide & Flash').

8 Turn off the device when you finished the treatment.

9 Remove hair before every next treatment, as long as hair is still visible.

Note: Do not try the device on difficult or sensitive areas (ankle and bony

area).

D Clean & store after treatment

1 Unplug the device from the power outlet if you have used it with the

power adapter.

2 Let the device cool down.

3 Moisten the soft cloth supplied with a few drops of water.

4 Take the attachment off the device.

A

5 Clean the light exit window of the device (A).

Strona jest ładowana ...

Saeco BRI958/00 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Saeco BRI958/00 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty