Panasonic SC-PT170 Instrukcja obsługi

Kategoria
Odtwarzacze DVD
Typ
Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

[EP]
RQTX0241-R
Operating Instructions
Instrukcja obsługi
Návod k obsluze
DVD Home Theater Sound System
Zestaw kina domowego z odtwarzaczem DVD
Systém zvuku domácího kina s DVD pâehrávaçem
Model No. SC-PT170
SC-PT175
until
2009/02/25
The illustrations shown may differ from your unit.
Urzdązenie pokazane na ilustracjach może siężnić od zakupionego urządzenia.
Uvedené ilustrace se mohou od vašeho přístroje lišit.
Region number/Numer regionu/Číslo regionu
The player plays DVD-Video marked with labels containing the region number 2” or “ALL”.
Odtwarzacz obsługuje płyty DVD-Video z numerami regionów „2“ lub „ALL“.
Přehrávač přehrává disky DVD-Video označené štítky s číslem regionu „2“ nebo „ALL“.
Example/Przykład/Příklad:
2 ALL
3
5
2
The illustration shows SC-PT170.
Na rysunku przedstawiono model SC-PT170.
Obrázek představuje model SC-PT170.
SC-PT170-175EP-RQTX0241-R_eng.book Page 1 Wednesday, February 4, 2009 12:19 PM
2
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Dear customer
Thank you for purchasing this product. For optimum performance and
safety, please read these instructions carefully.
Before connecting, operating or adjusting this product, please read
the instructions completely.
Please keep this manual for future reference.
Indicates features applicable to:
Accessories
Please check and identify the supplied accessories.
Operations in these instructions are described mainly with the
remote control, but you can perform the operations on the main
unit if the controls are the same.
[PT170] : SC-PT170 [PT175] : SC-PT175
System SC-PT170 SC-PT175
Main unit SA-PT170 SA-PT170
Front speakers SB-HF170 SB-HF175
Center speaker SB-HC170 SB-HC175
Surround speakers SB-HS170 SB-HS175
Subwoofer SB-HW170 SB-HW170
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PRODUCT DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO RAIN,
MOISTURE, DRIPPING OR SPLASHING AND THAT NO
OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
USE ONLY THE RECOMMENDED ACCESSORIES.
DO NOT REMOVE THE COVER (OR BACK); THERE
ARE NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE,
BUILT-IN CABINET OR IN ANOTHER CONFINED SPACE.
ENSURE THE UNIT IS WELL VENTILATED. TO PREVENT RISK
OF ELECTRIC SHOCK OR FIRE HAZARD DUE TO
OVERHEATING, ENSURE THAT CURTAINS AND ANY OTHER
MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
DO NOT OBSTRUCT THE UNIT’S VENTILATION OPENINGS
WITH NEWSPAPERS, TABLECLOTHS, CURTAINS, AND
SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS
LIGHTED CANDLES, ON THE UNIT.
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY
FRIENDLY MANNER.
This product may receive radio interference caused by mobile
telephones during use. If such interference is apparent, please
increase separation between the product and the mobile telephone.
The socket outlet shall be installed near the equipment and easily
accessible.
The mains plug of the power supply cord shall remain readily
operable.
To completely disconnect this apparatus from the AC Mains,
disconnect the power supply cord plug from AC receptacle.
THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.
(Back of product)
(Inside of product)
1 Remote control
(N2QAYB000366)
2 Remote control batteries
1 FM indoor antenna
[PT170]
4 Speaker cables
[PT175]
2 Speaker cables
1 AC mains lead
1 Sheet of speaker cable stickers
[PT175] 2 Speaker stands (with cable)
[PT175] 2 Bases
[PT175] 8 Screws
2
SC-PT170-175EP-RQTX0241-R_eng.book Page 2 Wednesday, February 4, 2009 12:19 PM
3
Getting StartedPlaying DiscsOther OperationsReference
RQTX0241
ENGLISH
TABLE OF CONTENTS
Getting Started
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Quick Start Guide
step 1 Assembling the front speakers [PT175] . . . . . 4
step 2 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
step 3 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Speaker connections. . . . . . . . . . . . . . . . . . . . . .6
Radio antenna connections. . . . . . . . . . . . . . . . .6
Audio and video connections . . . . . . . . . . . . . . .7
step 4 AC mains lead connection. . . . . . . . . . . . . . . 8
step 5 Preparing the remote control . . . . . . . . . . . . 8
step 6 EASY SETUP
. . . . . . . . . . . . . . . . . . . . . . . 9
Setting up the radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Presetting stations automatically . . . . . . . . . . . . . . . . . . . . 10
Confirming the preset channels. . . . . . . . . . . . . . . . . . . . . 10
Manual tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Selecting the playback source . . . . . . . . . . . . . . . . . . . . 11
Selecting the source from the START menu . . . . . . . . . . . 11
Selecting the source by the remote control . . . . . . . . . . . . 11
Playing Discs
Basic play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Using the main unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using the remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Other modes of play. . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Repeat play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Program and Random play. . . . . . . . . . . . . . . . . . . . . . . . . 16
Using navigation menus. . . . . . . . . . . . . . . . . . . . . . . . . 17
Playing data discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Playing RAM and DVD-R/-RW (DVD-VR) discs . . . . . . . . 17
Using on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . 18
Other Operations
Using the VIERA Link “HDAVI Control
TM
. . . . . . . . . . .20
One touch play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Auto input switching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Power off link . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Speaker control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
VIERA Link Control only with TV’s remote control
(for “HDAVI Control 2 or later”) . . . . . . . . . . . . . . . . . . . . 21
Operating other devices . . . . . . . . . . . . . . . . . . . . . . . . . 22
Playing from an USB device . . . . . . . . . . . . . . . . . . . . . . . 22
Playing from MUSIC PORT . . . . . . . . . . . . . . . . . . . . . . . . 22
Reference
Changing the player settings . . . . . . . . . . . . . . . . . . . . .23
DivX information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Displaying DivX subtitles text . . . . . . . . . . . . . . . . . . . . . . . 25
Speaker installation option . . . . . . . . . . . . . . . . . . . . . . .26
Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Discs that can be played . . . . . . . . . . . . . . . . . . . . . . . . .28
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Control reference guide . . . . . . . . . . . . . . . . . . . . . . . . . 34
Enjoying sound from all
speakers and various sound
effects
Enjoying surround sound effects . . . . . . . . . . . . . . 12
Selecting sound mode . . . . . . . . . . . . . . . . . . . . . . . 12
Whisper-mode Surround . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the speaker output level manually . . . . 13
3
SC-PT170-175EP-RQTX0241-R_eng.book Page 3 Wednesday, February 4, 2009 12:19 PM
4
RQTX0241
Quick Start Guide
Getting Started
ENGLISH
Preparation
To prevent damage or scratches, lay down a soft cloth to assemble speakers.
For assembly, use a Phillips-head screwdriver (not included).
You will need to obtain the appropriate screw eyes to match the walls
or pillars to which they are going to be fastened.
Consult a qualified housing contractor concerning the appropriate
procedure when attaching to a concrete wall or a surface that may not
have strong enough support. Improper attachment may result in
damage to the wall or speakers.
Caution
Do not stand on the base. Be cautious when children are near.
step 1 Assembling the front speakers [PT175]
Speaker assembly option
Make sure you have all the indicated components before starting assembly, setup, and connection.
Keep the screws out of reach of children to prevent swallowing.
For optional wall mount, refer to page 26.
2 Front speakers
2 Stands (with cable)
2 Bases 8 Screws
2
1
2
1
Slide into the groove.
Tighten securely.
Position the cable
between the ridges.
Press into the groove.
Leave about 90 mm.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Push!
Insert the wire fully.
i: White
j: Blue
Tighten securely.
Leave about
100 mm.
You can remove and use the
cable from the stand. To reattach
the cable, refer page 26.
Thread the speaker cable through
the base.
Attach the speaker.
Slide into the
groove.
Preventing the speakers from falling
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the
speaker
Screw eye
(not included)
Wall
Approx.
150 mm
DO
NOT
4
SC-PT170-175EP-RQTX0241-R_eng.book Page 4 Wednesday, February 4, 2009 12:19 PM
5
RQTX0241
Getting Started
Quick Start Guide
ENGLISH
How you set up your speakers can affect the bass and the sound field.
Note the following points:
Place speakers on flat secure bases.
Placing speakers too close to floors, walls, and corners can result in excessive bass. Cover walls and windows with thick curtains.
For optional wall mount, refer to page 26.
[Note]
Keep your speakers at least 10 mm away from the system for proper ventilation.
Setup example
Place the front, center, and surround speakers at approximately the same distance from the seating position. The angles in the diagram are
approximate.
Notes on speaker use
Use only supplied speakers
Using other speakers can damage the unit, and sound quality will be
negatively affected.
You can damage your speakers and shorten their useful life if you play
sound at high levels over extended periods.
Reduce the volume in the following cases to avoid damage:
– When playing distorted sound.
– When the speakers are reverberating due to a record player, noise
from FM broadcasts, or continuous signals from an oscillator, test
disc, or electronic instrument.
– When adjusting the sound quality.
– When turning the unit on or off.
If irregular colouring occurs on your TV
The center speaker is designed to be used close to a TV, but the picture
may be affected with some TVs and setup combinations.
If this occurs, turn the TV off for about 30 minutes.
The demagnetising function of the TV should correct the problem. If it
persists, move the speakers further away from the TV.
Caution
Do not touch the front netted area of the speakers. Hold by the sides.
e.g. [PT170] Center speaker
step 2 Positioning
Subwoofer Front speakers
e.g. [PT170]
Center speaker
e.g. [PT170]
Main unit
Surround speakers
e.g. [PT170]
To allow for proper ventilation and to maintain
good airflow around the main unit, position it with
at least 5 cm of space on all sides.
Put on a rack or shelf. Vibration caused by the
speaker can disrupt the picture if it is placed
directly on the TV.
Place to the right or left of the
TV, on the floor or a sturdy
shelf so that it will not cause
vibration. Leave about 30 cm
from the TV.
Caution
The main unit and supplied speakers are to be used only as
indicated in this setup. Failure to do so may lead to damage to
the amplifier and/or the speakers, and may result in the risk of
fire. Consult a qualified service person if damage has occurred
or if you experience a sudden change in performance.
Do not attempt to attach these speakers to walls using
methods other than those described in this manual.
DO
DO
NOT
5
SC-PT170-175EP-RQTX0241-R_eng.book Page 5 Wednesday, February 4, 2009 12:19 PM
6
RQTX0241
Quick Start Guide
Getting Started
ENGLISH
Turn off all equipment before connection and read the appropriate operating instructions.
Do not connect the AC mains lead until all other connections are complete.
Setup example
Pay attention to the type of speaker and the connector colour when you place the speakers.
Connect to the terminals of the same colour.
Use of the speaker cable stickers is convenient when making cable connections.
step 3 Connections
1
Speaker connections
Main unit
CENTERSUBWOOFER FRONT
6 5 2 1 4 3
L
R
L
R
SURROUND
FM ANT
(75 )
2
1
SPEAKERS
2
Radio antenna connections
Using an indoor antenna
FM ANT
(75 )
Adhesive tape
Main unit
FM indoor antenna
(included)
Affix this end of the antenna
where reception is best.
Using an outdoor antenna
FM ANT
(75 )
Main unit
FM outdoor antenna
[Using a TV antenna
(not included)]
The antenna should be
installed by a competent
technician.
75 coaxial cable
(not included)
Use outdoor antenna if FM radio reception is poor.
Disconnect the antenna when the unit is not in use.
Do not use the outdoor antenna during an electrical storm.
6
SC-PT170-175EP-RQTX0241-R_eng.book Page 6 Wednesday, February 4, 2009 12:19 PM
7
RQTX0241
Getting Started
Quick Start Guide
ENGLISH
Basic setup example
[Note]
Do not make the video connections through the VCR.
Due to copy guard protection, the picture may not be displayed properly.
Only one video connection is required. Choose one of the video connections above depending on your TV.
If you have various sound sources (such as Blu-ray player, DVD recorder, VCR, etc.), connect them to the available inputs on the TV and the TV
output should then be connected to the AUX or OPTICAL IN terminal of the main unit.
Main unit
OPTICAL
IN
AUX
L
R
AV
3
3
Audio and video connections
Other video connection
TV terminal
Cable required
(not included)
Main unit terminal Features
[Note]
If there is more than
one HDMI terminal,
refer to the operating
instructions for the TV
to determine which
terminal to connect to.
[Note]
Non-HDMI-compliant cables
cannot be utilized.
It is recommended that you use
Panasonic’s HDMI cable.
Recommended part number:
RP-CDHG15 (1.5 m),
RP-CDHG30 (3.0 m),
RP-CDHG50 (5.0 m), etc.
[\\\\\\\\\\\HDMI\\\\\\\\\\\] This connection provides the best picture quality.
Set “VIDEO PRIORITY” to “ON” (B 24, HDMI menu).
Set “VIDEO FORMAT” in Menu 4 (HDMI) (B 19).
VIERA Link “HDAVI Control”
If your Panasonic TV is VIERA Link compatible, you
can operate your TV synchronising with home theater
operations or vice versa (B 20, Using the VIERA Link
“HDAVI Control
TM
”).
Make the extra audio connection (B below) when you
use
VIERA Link “
HDAVI Control
function.
AV1
AV2
AV OUT
AV
Scart cable
(not included)
TV (not included)
Main unit
Scart cable
(not included)
Set top box (STB) or VCR
(not included)
§
This connection will also enable you to play TV audio through your
home theater system (B 11, Selecting the source by the remote
control). Select the appropriate audio out (e.g. Monitor) on the TV.
To improve picture quality, you can change the video signal output from
the SCART (AV) terminal to suit the type of TV you are using.
Select “S-VIDEO”, “RGB 1” or “RGB 2” from “VIDEO OUT – SCART”
in VIDEO menu (B 24).
When both the HDMI cable and scart cable are connected, there will
be no RGB output from the SCART (AV) terminal.
AV IN
HDMI cable
Other audio connections
TV or external
equipment
terminal
Cable required
(not included)
Main unit terminal Features
Do not bend sharply when
connecting.
[\\\\\\OPTICAL\IN\\\\\\] This is the preferred connection for best sound and true
surround sound.
This unit can decode the surround signals received
from your TV, cable or satellite STB. Refer to the
operating instructions for the TV, cable or satellite STB
for the settings necessary to output its audio from the
digital audio output to your home theater system. Only
Dolby Digital and PCM can be played with this
connection.
After making this connection, make settings to suit the
type of audio from your digital equipment (B 11).
[\\\\\\\\\\\AUX\\\\\\\\\\\] This connection enables you to play audio from your
TV, STB or VCR through your home theater system
(B 11, Selecting the source by the remote control).
OPTICAL OUT
Optical digital audio cable
OPTICAL
IN
AUDIO
OUT
L
R
Audio cable
AUX
L
R
7
SC-PT170-175EP-RQTX0241-R_eng.book Page 7 Wednesday, February 4, 2009 12:19 PM
8
RQTX0241
Quick Start Guide
Getting Started
ENGLISH
Conserving power
The main unit consumes a small amount of power, even when it is in
standby mode (approx. 0.2 W). To save power when the unit is not to be
used for a long time, unplug it from the household mains socket.
You will need to reset some memory items after plugging in the main
unit.
[Note]
The included AC mains lead is for use with the main unit only.
Do not use it with other equipment. Also, do not use cords for other
equipment with the main unit.
Do not:
mix old and new batteries.
use different types of batteries at the same time.
take apart or short circuit.
attempt to recharge alkaline or manganese batteries.
use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can
severely damage the remote control.
Remove the batteries if the remote control is not going to be used for a
long period of time. Store in a cool, dark place.
Aim at the remote control signal sensor (B 35), avoiding obstacles, at a
maximum range of 7 m directly in front of the unit.
step 4 AC mains lead connection
AC IN
Main unit
To household mains socket
AC mains lead (included)
step 5 Preparing the remote control
Batteries
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
R6/LR6, AA
Insert so the poles ( and ) match those in the remote control.
Press in and lift up.
Replace the cover.
Use alkaline or manganese batteries.
Do not heat or expose to flame.
Do not leave the battery(ies) in an automobile exposed to direct
sunlight for a long period of time with doors and windows closed.
Use
8
SC-PT170-175EP-RQTX0241-R_eng.book Page 8 Wednesday, February 4, 2009 12:19 PM
9
RQTX0241
Getting Started
Quick Start Guide
ENGLISH
The Easy setup screen assists you in making necessary
settings.
Language
Select the language used on menu screen.
TV aspect
Select the aspect to suit your TV.
Speaker check
Listen to speaker output to confirm speaker connections.
Speaker output
Make surround sound setting for speaker output.
TV audio
Select the audio input connection from your TV.
For AUX connection (B 7): Select “AUX”.
For OPTICAL IN connection (B 7): Select “DIGITAL IN”.
This will be the TV audio setting for VIERA Link “HDAVI Control”. (
B
20)
[Note]
If this unit is connected to a “HDAVI Control 3 or later” compatible TV
via HDMI cable, the menu language and TV aspect information will be
retrieved via VIERA Link.
If this unit is connected to a “HDAVI Control 2” compatible TV via
HDMI cable, the menu language information will be retrieved via
VIERA Link.
Settings in the Easy setup can also be changed in the player settings
[e.g. language, TV aspect, speaker level and TV audio (B 23)].
step 6 EASY SETUP
Preparation
Turn on your TV and select the appropriate
video input mode (e.g. VIDEO 1, AV 1, HDMI,
etc.) to suit the connections to this unit.
To change your TV’s video input mode, refer
to its operating instructions.
This remote control can perform some basic
TV operations (B 34).
1
Turn on the unit.
When the Easy setup screen appears
automatically, skip step 2 to 6.
2
Select “DVD/CD”.
3
Show the setup menu.
4
Select “OTHERS”.
5
Select “EASY SETUP”.
6
Select “SET”.
7
Select “Yes”.
8
Follow the messages and
make the settings.
(B right, Easy setup settings)
9
Finish Easy setup.
DVD
DVD
OK
SETUP
OK
SETUP
DVD
-
CH SELECT
SETUP
SET
MAIN
DISC
VIDEO
AUDIO
DISPLAY
HDMI
OTHERS
EXIT : SETUP
RETURN
Menu
OK
OK
OK
OK
OK
OK
Easy setup settings
9
SC-PT170-175EP-RQTX0241-R_eng.book Page 9 Wednesday, February 4, 2009 12:19 PM
10
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Setting up the radio
Up to 30 stations can be set.
“SET OK” is displayed when the stations are set, and the radio tunes to
the last preset station.
“ERROR” is displayed when automatic presetting is unsuccessful.
Preset the channels manually (B right).
The FM setting is also shown on the TV display.
Press and hold the button again to cancel the mode.
The mode is also cancelled when you change the frequency.
Up to 30 stations can be set.
A station previously stored is overwritten when another station is stored in
the same channel preset.
Presetting stations automatically
1
Select “FM”.
Main unit:
Press [SELECTOR].
2
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest
frequency.
CURRENT:
To begin auto preset with the current
frequency.
§
§
To change the frequency, refer to “Manual
tuning” (B right).
3
(press and hold)
Release the button when
“FM AUTO” is displayed.
Main unit:
Press and hold [MEMORY].
The tuner starts to preset all the stations it
can receive into the channels in ascending
order.
1 2 3
4 5 6
7 8
0
9
SEARCH SEARCH
OK
EXT-IN
RADIO
10
MENU
SKIP SKIP
,
SEARCH
Numbered
buttons
RADIO
OK
PLAY MODE
MENU
,
PLAY MODE
SELECTOR
TUNE
MEMORY
-TUNE MODE/—FM MODE
EXT-IN
RADIO
MENU
PLAY
LIST
OK
Confirming the preset channels
1
Select “FM”.
Main unit:
Press [SELECTOR].
2
Select the channel.
To select a 2-digit number
e.g. 12: [S10] B [1] B [2]
Alternatively, press [X, W].
Main unit:
Press [-TUNE MODE] to select “PRESET”
on the display, and then press
[X TUNE W] to select the channel.
When a stereo FM broadcast is being
received, “ST” lights in the display.
If noise is excessive
Press and hold [PLAY MODE]
(main unit: [—FM MODE]) to
display “MONO”.
Manual tuning
1
Select “FM”.
Main unit:
Press [SELECTOR].
2
Select the frequency.
Main unit:
Press [-TUNE MODE] to select “MANUAL”
on the display, and then press
[X TUNE W] to select the frequency.
To start automatic tuning, press and hold
[6, 5] (main unit: [X TUNE W]) until
the frequency starts scrolling. Tuning
stops when a station is found.
Presetting stations manually
1 While listening to the radio broadcast
Press [OK].
2 While the frequency is flashing on the display
Press the numbered buttons to select a channel.
To select a 2-digit number
e.g. 12: [S10] B [1] B [2]
Alternatively, press [X, W],
and then press [OK].
Main unit:
1 While listening to the radio broadcast
Press [MEMORY] twice.
2 While a channel number is flashing on the display
Press [X TUNE W], and then press [MEMORY].
EXT-IN
RADIO
1 2 3
4 5 6
7 8
0
9
10
ST
MONO
EXT-IN
RADIO
SEARCH SEARCH
10
SC-PT170-175EP-RQTX0241-R_eng.book Page 10 Wednesday, February 4, 2009 12:19 PM
11
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Selecting the playback source
You can select sound effects, desired source, or access playback/menus
by using the START menu.
When “Input Selection” is selected
You can select a desired source from the menu.
DVD/CD (B 9), FM (B 10), AV (B right), AUX
§
(B right),
DIGITAL IN
§
(B right), USB (B 22), MUSIC PORT (B 22)
§
“(TV)” will appear beside “AUX” or “DIGITAL IN”, indicating the TV
audio setting for VIERA Link “HDAVI Control” (B 20).
When “Sound” is selected
You can select sound quality settings (B 12, Equalizer).
When a disc is loaded or an USB device is connected, you can also
access playback or menus from the START menu.
e.g. [DVD-V]
When the on-screen control panel appears
e.g. [DVD-V] (when “Playback Disc” is selected from the START menu)
You can operate the playback with the indicated controls.
Press [SELECTOR] on the main unit to select source from the main unit.
(B 35)
[Note]
Confirm the audio connection to the SCART (AV), AUX or OPTICAL IN
terminal on the main unit when you select the corresponding sources
(B 7). Reduce the volume on the TV to its minimum, and then adjust the
volume of the main unit.
Select to suit the type of audio from the OPTICAL IN terminal on the main
unit.
(When receiving true 5.1-channel surround sound, select “PCM OFF”.)
[Note]
Audio that is input through the OPTICAL IN terminal is not output from
the HDMI terminal.
Underlined items in the above paragraphs are factory settings.
Selecting the source from the START menu
1
Show the START menu.
This unit automatically turns on.
(The TV also turns on when using VIERA Link
“HDAVI Control”. This works only when in
“DVD/CD” or “USB” mode without any disc/
device being loaded/connected.)
e.g.
2
Select an item.
To exit, press [START].
3
Make the setting.
OK
DVD
USB
EXT-IN
RADIO
S
T
A
R
T
SETUP
DVD
USB
START
RADIO, EXT-IN
OK
SETUP
S
T
A
R
T
DVD/CD Home Cinema
OK
RETURN
Input Selection
Sound
OK
OK
DVD/CD Home Cinema
OK
RETURN
Input Selection
Sound
Playback Disc
TOP MENU (DVD)
MENU (DVD)
Playback/menu access
Selecting the source by the remote control
DVD/CD (B 9)
Each time you press the button:
FM (B 10)
AV:
AUX
§
:
D-IN
§
:
MUSIC P.:
For audio input through the
SCART (AV) terminal.
For audio input through the AUX
terminal.
For audio input through the
OPTICAL IN terminal. (B below)
For audio input through MUSIC
PORT. (B 22)
§
“(TV)” will appear beside “AUX” or
“D-IN”, indicating the TV audio setting for
VIERA Link “HDAVI Control” (B 20).
USB (B 22)
Making settings for digital audio input
1 While in “D-IN” mode
Press [SETUP] to select “MAIN/SAP”, “DRC” or “PCM FIX”.
2 While the selected mode is displayed
Press [3, 4] to make the setting.
MAIN/SAP mode (Only works with Dolby Dual Mono):
MAIN, SAP
§
, MAIN+SAP
§
(stereo audio)
§
“SAP” = Secondary Audio Program
Dynamic Range Compression
DRC ON: Adjust for clarity even when the volume is low by
compressing the range of the lowest sound level and the
highest sound level. Convenient for late night viewing.
(Only works with Dolby Digital)
DRC OFF
: The full dynamic range of the signal is reproduced.
PCM FIX mode
PCM ON: Select when receiving only PCM signals.
PCM OFF
: Select when receiving Dolby Digital and PCM signals.
DVD
EXT-IN
RADIO
USB
11
SC-PT170-175EP-RQTX0241-R_eng.book Page 11 Wednesday, February 4, 2009 12:19 PM
12
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Enjoying sound from all speakers and various
sound effects
The following sound effects may not be available or may have no effect
with some sources.
You may experience a reduction in sound quality when these sound effects
are used with some sources. If this occurs, turn the sound effects off.
§
ÎPLII” lights in the main unit’s display when there is effect.
Except [DivX]
You can enhance the surround effect for low volume 5.1-channel sound.
(Convenient for late night viewing.)
Enjoying surround sound effects
SURROUND OUTPUT indicator on the main
unit will light up when there is surround sound
effect.
Each time you press the button:
STANDARD:
Sound is output as it was recorded/encoded.
Speaker output varies depending on the
source.
MULTI-CH:
You can enjoy sound from the front speakers,
as well as the surround speakers even when
playing a 2-channel sound or non-surround
sound.
MANUAL: (B below)
While “MANUAL” is
displayed
Select other surround modes.
Each time you press [2, 1]:
PLII MOVIE
§
Suitable for movie software, or softwares
recorded in Dolby Surround. (except [DivX])
PLII MUSIC
§
Adds 5.1-channel effects to stereo sources.
(except [DivX])
S.SRND
You can enjoy sound from all speakers with
stereo sources. (Surround output will be in
mono.)
STEREO
Sound will only be output to the front
speakers and the subwoofer from any source.
Recommended modes to enjoy TV audio or stereo
sources from all speakers:
PLII MOVIE
PLII MUSIC
S.SRND
OK
SOUND
SURROUND
-
CH SELECT
SETUP
W.SRD
VOL
OK
SOUND
SURROUND
-
CH SELECT
SETUP
W.SRD
OK
+, VOL
SETUP,
—CH SELECT
SURROUND
SOUND
W.SRD
SURROUND
Selecting sound mode
1
Select a sound mode.
Each time you press the button:
EQ: Equalizer
SUBW LVL: Subwoofer Level
C.FOCUS: Center Focus
2
While the selected
mode is displayed
Make settings.
Refer to the following for setting details of
each sound effect.
Equalizer
You can select sound quality settings.
Each time you press [2, 1]:
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT: For background music.
FLAT: Cancel (no effect is added).
Subwoofer level
You can adjust the amount of bass. The unit automatically
selects the most suitable setting according to the type of
playback source.
SUB W 1
,#
SUB W 2
,#
SUB W 3
,#
SUB W 4
^-------------------------------------------------------------------J
The setting you make is retained and recalled every time you
play the same type of source.
Center Focus
(Effective when playing audio containing center channel
sound or when “ÎPLII” lights in the main unit display.)
You can make the sound of the center speaker seem like it is
coming from within the TV.
C.FOCUS ON,------.C.FOCUS OFF
Whisper-mode Surround
“(( ))” lights when there is effect.
Each time you press the button:
WHISPER-MODE SRD ON
WHISPER-MODE SRD OFF
SOUND
W.SRD
12
SC-PT170-175EP-RQTX0241-R_eng.book Page 12 Wednesday, February 4, 2009 12:19 PM
13
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Preparation
To display the picture, turn on the TV and select the appropriate video
input mode.
Press [r, s VOL] to adjust the volume to normal listening level.
Select “TEST TONE” from “SPEAKER SETTINGS” in AUDIO menu
(B 24).
(Effective when playing 5.1-channel sound or when “ÎPLII” lights.)
Adjusting the speaker output level manually
1
Enter test tone mode.
Test tone will be output to each channel in the
following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND LEFT
2
Adjust the speaker level for each
speaker. (CENTER, SURROUND
RIGHT, SURROUND LEFT)
`
6dB to
i
6 dB (Factory preset: 0 dB)
To exit the screen, press [SETUP].
To adjust speaker level during play
1 Press and hold [—CH SELECT] to select the speaker.
While the speaker channel is displayed, press [—CH SELECT].
L# C# R# RS# LS# SW
^---------------------------------------------}
You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel and “ÎPLII” is not lit.
“S” appears on the main unit’s display when you have selected
“S.SRND” (
B 12
, Enjoying surround sound effects). In this case, you
can adjust both surround speaker levels at the same time using
[3, 4]
.
S: `6dB to i6dB
2 Press [3] (increase) or [4] (decrease) to adjust the speaker level
for each speaker.
C, RS, LS, SW: `6dB to i6dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while “L” or “R” is selected,
press [2, 1].
OK
e.g.
SET
RETURN
AUDIO-SPEAKER SETTINGS-TEST TONE
SPEAKER
LEFT
CENTER
RIGHT
SURROUND RIGHT
SURROUND LEFT
TRIM LEVEL
− −
0dB
− −
0dB
0dB
EXIT : SETUP
OK
13
SC-PT170-175EP-RQTX0241-R_eng.book Page 13 Wednesday, February 4, 2009 12:19 PM
14
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Basic play
Preparation
To display the picture, turn on your TV and change its video input mode (e.g. VIDEO 1, AV 1, HDMI, etc.) to suit the connections to this unit.
[Note]
DISC CONTINUES TO ROTATE WHILE MENUS ARE DISPLAYED.
To preserve the unit’s motor and your TV screen, press [] (Stop) when you are finished with the menus.
Total title number may not be displayed properly on iR/iRW.
ABOUT DIVX VIDEO:
DivX
®
is a digital video format created by DivX, Inc. This is an official DivX Certified device that plays DivX video.
If you are experiencing problems, refer to troubleshooting (B 30 to 31)
Using the main unit
TUNE
SELECTOR
VOLUME
TUNE
3
4
5
, + VOLUME
OPEN CLOSE
21
SELECTOR
MEMORY
(Stop)
Start play.
Turn [s, r VOLUME] to
adjust the volume.
Select “DVD/CD”.Turn on the unit.
Press to skip.
Press and hold to:
– search during play
– start slow-motion play during
pause
Press [1] (Play) to start
normal play.
Open the disc tray.
Load the disc.
Load double-sided discs
so the label for the side
you want to play is facing
up.
For DVD-RAM,
remove the disc from
its cartridge before
use.
Label facing up
14
SC-PT170-175EP-RQTX0241-R_eng.book Page 14 Wednesday, February 4, 2009 12:19 PM
15
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Using the remote control
One touch
play
(during standby
mode)
(Remote control only)
The main unit automatically turns
on and starts playing the disc in the
tray.
Stop
The position is memorised while
“RESUME STOP” is on the screen.
Press [1 PLAY] to resume.
Press [ STOP] again to clear
the position.
Pause
Press [1 PLAY] to restart play.
Skip
Search
(during play)
Up to 5 steps.
Press [1 PLAY] to start normal
play.
Slow-motion
(during pause)
[VCD] Slow-motion: Forward
direction only.
[MPEG4] [DivX]
Slow-motion: Does
not work.
Frame-by-
frame
(during pause)
[DVD-VR] [DVD-V] [VCD]
[DVD-VR] [VCD] Forward direction
only.
RETURN
VOL
STOP
1 2 3
4 5 6
7 8
0
9
SEARCH
SKIP
SLOW
SKIP
PLAY
PAU SE
SEARCH
OK
DVD
T
O
P
M
E
N
U
10
&
+
4
'
%
6
0
#
8
+
)
#
6
1
4
PLAY
LIST
MENU
FL DISPLAY
1
2
5
SLOW, SEARCH
,
,
SKIP
PAUSE
STOP
OK
RETURN
MENU, PLAY LIST
FL DISPLAY
TOP MENU,
DIRECT NAVIGATOR
Numbered
buttons
+, VOL
PLAY
STOP
PAUSE
SKIP SKIP
SEARCH
SLOW
SEARCH
OK
On-screen
item select
Enter number
[DVD-VR] [DVD-V] [VCD] [CD]
e.g. To select 12:
[S10] B [1] B [2]
[VCD] with playback control
Press [ STOP] to cancel the PBC
function, and then press the
numbered buttons.
Disc menu
[DVD-V]
Shows a disc top menu.
[DVD-VR]
Press the button to show the
programs (B 17).
[DVD-V]
Shows a disc menu.
[DVD-VR]
Press the button to show a play list
(B 17).
[VCD] with playback control
Shows a disc menu.
Return to
previous
screen
Main unit
display
[DVD-VR] [DVD-V] [WMA] [MP3]
[MPEG4] [DivX]
Time display
,-. Information display
(e.g. [DVD-VR] Program
number)
[JPEG]
SLIDE
,-.Contents number
OK
Select
Confirm
1 2 3
4 5 6
7 8
0
9
10
T
O
P
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
PLA
Y
LIST
MENU
RETURN
RETURN
-
SLEEP
FL DISPLA
Y
15
SC-PT170-175EP-RQTX0241-R_eng.book Page 15 Wednesday, February 4, 2009 12:19 PM
16
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Other modes of play
This works only when the elapsed play time can be displayed. It also
works with all JPEG content.
Items shown differ depending on the type of disc and playback mode.
Preparation
[DVD-VR] Select “DATA” in “DVD-VR/DATA” (B 25, OTHERS menu) to
play WMA, MP3, JPEG, MPEG4 or DivX contents.
If “PLAYBACK MENU” screen appears, select “AUDIO/PICTURE” or
“VIDEO” (B 17, Using PLAYBACK MENU), then proceed with the
above.
For a disc with both WMA/MP3 and JPEG contents, select either music
or picture contents.
WMA/MP3: Select “MUSIC PROGRAM” or “MUSIC RANDOM”.
JPEG: Select “PICTURE PROGRAM” or “PICTURE RANDOM”.
[DVD-V] Some items cannot be played even if you have programmed
them.
To select all the items
Press [3, 4] to select “ALL” and press [OK].
To clear the selected program
1Press [1] and then press [3, 4] to select the program.
2Press [CANCEL].
To clear the whole program
Press [1] several times to select “CLEAR ALL”, and then press [OK].
The whole program is also cleared when the disc tray is opened, the unit
is turned off or another source is selected.
Repeat play
During play
Select an item to be repeated.
e.g. [DVD-V]
`TITLE ---. `CHAP. ---. `OFF
^----------------------------------------------------b
To cancel, select “OFF”.
Program and Random play
[DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG] [MPEG4] [DivX]
While stopped
Select the play mode.
Program and random playback screens appear
sequentially.
Program ------------------------------------------) Random
^--- Exit program and random screens (}
RETURN
PLAY
OK
CANCEL
PLAY MODE
REPEAT
OK
RETURN
CANCEL
PLAY
REPEAT
PLAY MODE
REPEAT
PLAY MODE
Program play (up to 30 items)
1
Select an item.
e.g. [DVD-V]
Repeat this step to program other items.
To return to the previous menu, press
[RETURN].
2
Start play.
Random play
1
(Only when the disc has groups or multiple
titles.)
Select a group or title.
e.g. [DVD-V]
¢” represents selected. To deselect,
press [OK] again.
2
Start play.
OK
DVD-V PROGRAM
SELECT TITLE
TITLE CHAPTER
TITLE 1
TITLE 2
TITLE 3
TITLE 4
1
2
3
4
5
6
7
8
9
10
START:PLAY
CLEAR ALL
PLAY
OK
DVD-V RANDOM
SELECT TITLE
PRESS PLAY TO START
TITLE 1
TITLE 2
TITLE 3
PLAY
16
SC-PT170-175EP-RQTX0241-R_eng.book Page 16 Wednesday, February 4, 2009 12:19 PM
17
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Using navigation menus
[DVD-VR] Select “DATA” in “DVD-VR/DATA” (B 25, OTHERS menu) to
play WMA, MP3, JPEG, MPEG4 or DivX contents.
“PLAYBACK MENU” screen appears when the disc contains both video
(MPEG4/DivX) and other format (WMA/MP3/JPEG).
You can select to play from your desired item while the “DATA-DISC”
screen is displayed.
e.g.
To display/exit the screen, press [MENU].
Play starts from the selected content.
Selecting the picture in Thumbnail menu
[JPEG]
To go to other group
1 Press [3] to select the group name.
2 Press [2, 1] to select the group and press [OK].
Titles appear only if the titles are recorded on the disc.
You cannot edit programs, play lists and disc titles.
This works only when the disc contains a play list.
Playing data discs
[WMA] [MP3] [JPEG] [MPEG4] [DivX]
Using PLAYBACK MENU
Select “AUDIO/PICTURE” or “VIDEO”.
To start play, press [1 PLAY].
To select an item to play, refer “Playing from
the selected item” (B below).
Playing from the selected item
Select an item.
Press [2, 1] to skip page by page.
To return to 1 level up from the current folder,
press [RETURN].
Maximum: 28 characters for file/folder name.
RETURN
STOP
SKIP SKIP
PLAY
OK
T
O
P
M
E
N
U
&
+
4
'
%
6
0
#
8
+
)
#
6
1
4
PLAY
LIST
MENU
,
SKIP
OK
RETURN
MENU, PLAY LIST
TOP MENU,
DIRECT NAVIGATOR
PLAY
OK
PLAYBACK MENU
WMA/MP3/JPEG
MPEG4/DivX
AUDIO/PICTURE
VIDEO
OK
DATA-DISC
ROOT
OK
RETURN
Perfume
My favorite1
My favorite2
My favorite3
Underwater
Fantasy planet
Starpersons1
Starpersons2
Group (Folder):
Content (File):
: WMA/MP3
: JPEG
: MPEG4/DivX
OK
1
While picture is
displayed
e.g.
2
Select a picture.
Press [:, 9 SKIP] to skip page by
page.
Playing RAM and DVD-R/-RW (DVD-VR) discs
[DVD-VR]
Playing the programs
1
While stopped e.g.
To exit the screen, press [DIRECT
NAVIGATOR].
2
Select the program.
Press [2, 1] to skip page by page.
Playing a play list
1
While stopped e.g.
To exit the screen, press [PLAY LIST].
2
Select the play list.
Press [2, 1] to skip page by page.
T
O
P
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
JPEG images G 1/ 1:C 3/ 9
Group name
Group and content
number
OK
T
O
P
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
PG
DATE
LENGTH
TITLE
1
0:16:02
10/11
LIVE CONCERT
02:15
2
0:38:25
12/05
AUTO ACTION
3
1:16:05
04/03
CINEMA
02:10
01:30
OK
RETURN
OK
PLA
Y
LIST
MENU
PL
DATE
LENGTH
TITLE
1
0:00:10
11/11
CITY PENGUIN
00:01
2
0:01:20
12/01
FOOTBALL
3
1:10:04
01/02
SPECIAL
01:10
01:20
OK
RETURN
OK
17
SC-PT170-175EP-RQTX0241-R_eng.book Page 17 Wednesday, February 4, 2009 12:19 PM
18
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Using on-screen menus
1
Show the on-screen
menu.
Each time you press the button:
Menu 1 (Disc/Play)
Menu 2 (Video)
Menu 3 (Audio)
Menu 4 (HDMI)
Exit
2
Select the item.
3
Make the settings.
4
Exit.
RETURN
1 2 3
4 5 6
7 8
0
9
PLAY
OK
F
U
N
C
T
I
O
N
S
10
CANCEL
OK
RETURN
FUNCTIONS
CANCEL
Numbered
buttons
PLAY
F
U
N
C
T
I
O
N
S
T
1
C1
1:ENG
3/2.
1 :E
OFF
TITLE SEARCH
Current item
Item name
e.g. Menu 1 (Disc/Play) [DVD-V]
OK
T
1
C 1
1:ENG
3/
1
OFF
CHAPTER SEARCH
Current setting
e.g. Menu 1 (Disc/Play) [DVD-V]
OK
RETURN
Items shown differ depending on the type of disc.
Menu 1 (Disc/Play)
TRACK SEARCH
TITLE SEARCH
CONTENT SEARCH
CHAPTER SEARCH
PG SEARCH
(Program
Search)
PL SEARCH
(Playlist Search)
To start from a specific item
[VCD] This does not work when using playback
control.
e.g. [DVD-V]: T2 C5
To select numbers for data disc
e.g. 123: [S10] B [1] B [2] B [3] B [OK]
AUDIO
[DVD-V] [DivX] (with multiple soundtracks)
To select audio soundtrack
[DVD-VR] [VCD]
To select “L”, “R”, “L+R” or “L R”
[DVD-V] (Karaoke disc)
To select “ON” or “OFF” for vocals
To select “OFF”, “V1”, “V2” or “V1+V2” for
vocal selections
Actual operations depend on the disc. Read the
disc’s instructions for details.
Signal type/data
LPCM/PPCM/ D/DTS/MP3/MPEG: Signal
type
kHz (Sampling frequency)/bit/ch (Number of
channels)
[DivX] It may take some time for play to start if
you change the audio on a DivX video disc.
PLAY SPEED
[DVD-VR] [DVD-V]
To change play speed
– from “k0.6” to “k1.4” (in 0.1-unit steps)
Press [1 PLAY] to return to normal play.
After you change the speed
– Dolby Pro Logic II has no effect.
– Audio output switches to 2-channel stereo.
– Sampling frequency of 96 kHz is converted to
48 kHz.
This function may not work depending on the
disc’s recording.
REPEAT MODE
(B 16, Repeat play)
A-B Repeat (To repeat a specified section)
Except [JPEG] [MPEG4] [DivX] [DVD-VR]
(Still picture part) [VCD] (SVCD)
Press [OK] at the starting and ending points.
Select “OFF” to cancel.
SUBTITLE
[DVD-V] [DivX] (with multiple subtitles)
[VCD] (SVCD only)
To select subtitle language
On iR/iRW, a subtitle number may be shown
for subtitles that are not displayed.
[DVD-VR] (with subtitle on/off information)
To select “ON” or “OFF”
This may not work depending on the disc.
[DivX] (B 25, Displaying DivX subtitles text)
ANGLE
[DVD-V] (with multiple angles)
To select a video angle
3/2 .1ch
.0: No surround
.1: Mono surround
.2: Stereo surround (left/right)
.1: Low frequency effect
(not displayed if there is no signal)
.1: Center
.2: Front leftiFront right
.3: Front leftiFront rightiCenter
e.g.
18
SC-PT170-175EP-RQTX0241-R_eng.book Page 18 Wednesday, February 4, 2009 12:19 PM
19
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Confirming HDMI information
1 Connection status
2 Shows the output signal type.
3 Shows the number of audio channels.
4 (B above, VIDEO FORMAT)
5 (B above, COLOUR SPACE)
[Note]
When “OFF” is selected in “AUDIO OUT” (B 24, HDMI menu), “– – –” will
be displayed in “AUDIO STREAM”.
DATE DISPLAY
[JPEG] To select “ON” or “OFF” for picture’s
date display
ROTATION
To rotate a picture (during pause)
[JPEG]:
0,------. 90,------.180,------.270
^--------------------------------------------J
Menu 2 (Video)
PICTURE MODE
NORMAL
CINEMA1:
CINEMA2:
DYNAMIC:
ANIMATION:
Mellows images and enhances
detail in dark scenes.
Sharpens images and enhances
detail in dark scenes.
Enhances the contrast for
powerful images.
Suitable for animation.
ZOOM
To select zoom sizes
NORMAL, AUTO (
[DVD-VR]
[DVD-V] [VCD]
),
k
2,
k
4
[JPEG]: during pause
TRANSFER
MODE
If you have chosen “480p”/“576p”/“720p”/“1080p”
(progressive), “1080i” (interlaced)
[“VIDEO FORMAT” in Menu 4 (HDMI)], select the
method of conversion for progressive output to
suit the type of material.
The setting will return to “AUTO” or “AUTO1”
when the disc tray is opened, the unit is turned
off or another source is selected.
When playing PAL discs
AUTO:
VIDEO:
FILM:
Automatically detects the film and
video content, and appropriately
converts it.
Select when using “AUTO”, and
the content is distorted.
Select this if the
edges of the film
content appear
jagged or rough
when “AUTO” is
selected.
However, if the video content is
distorted as shown in the
illustration to the right, then select
“AUTO”.
When playing NTSC discs
AUTO1:
AUTO2:
VIDEO:
Automatically detects the film and
video content, and appropriately
converts it.
In addition to “AUTO1”,
automatically detects film
contents with different frame rates
and appropriately converts it.
Select if the video content is
distorted when using “AUTO1” or
“AUTO2”.
SOURCE
SELECT
[DivX]
When you select “AUTO” the constructing
method of the DivX contents is automatically
distinguished and output. If the picture is
distorted, select “INTERLACE” or
“PROGRESSIVE” depending on which
constructing method was used when the contents
were recorded to disc.
AUTO, INTERLACE, PROGRESSIVE
JPG
DATE
Menu 3 (Audio)
DIALOGUE
ENHANCER
To make the dialogue in movies easier to hear
[DVD-V] (Dolby Digital, DTS, 3-channel or higher,
with the dialogue recorded in the center channel)
[DivX] (Dolby Digital, 3-channel or higher, with the
dialogue recorded in the center channel)
OFF, ON
Menu 4 (HDMI)
HDMI STATUS
To show HDMI information.
(B below, Confirming HDMI information)
HD ENHANCER
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (B 24, HDMI
menu) set to “ON”.
To sharpen the “720p”, “1080i” and “1080p”
picture quality
OFF, 1 (weakest) to 3 (strongest)
VIDEO FORMAT
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (B 24, HDMI
menu) set to “ON”.
To select suitable picture quality with your TV
(Video recordings will be converted to, and output
as, high-definition video.)
§
480p/576p/720p/1080p (progressive)
§
480i/576i/1080i (interlaced)
If the picture is distorted, press and hold
[CANCEL] until the picture is displayed
correctly. (The output will return to “480p”/
“576p”.)
§
The numbers displayed depend on the disc
being played. One of the above numbers is
displayed.
COLOUR SPACE
This works when the HDMI connection is being
used with “VIDEO PRIORITY” (B 24, HDMI
menu) set to “ON”.
To select suitable picture colour with your TV
YCbCr 4:2:2
YCbCr 4:4:4
RGB
If the setting above is not compatible with your
TV, it will not be displayed.
e.g.
HDMI
H D M I --- I N F O R M ATION
CONNECTED STATE
AUDIO STREAM
MAX CHANNEL
VIDEO FORMAT
COLOUR SPACE
CONNECTED
PCM
2ch
720p
YCbCr 4:4:4
1
2
3
4
5
19
SC-PT170-175EP-RQTX0241-R_eng.book Page 19 Wednesday, February 4, 2009 12:19 PM
20
RQTX0241
Getting StartedPlaying DiscsOther OperationsReference
ENGLISH
Other Operating
Using the VIERA Link “HDAVI Control
TM
VIERA Link “HDAVI Control”
VIERA Link “HDAVI Control” is a convenient function that offers linked
operations of this unit, and a Panasonic TV (VIERA) under “HDAVI
Control”. You can use this function by connecting the equipment with the
HDMI cable. See the operating instructions for connected equipment for
operational details.
VIERA Link “HDAVI Control”, based on the control functions provided by
HDMI which is an industry standard known as HDMI CEC (Consumer
Electronics Control), is a unique function that we have developed and
added. As such, its operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
This unit supports “HDAVI Control 4” function.
“HDAVI Control 4” is the newest standard (current as of December,
2008) for Panasonic’s HDAVI Control compatible equipment. This
standard is compatible with Panasonic’s conventional HDAVI
equipment.
Please refer to individual manuals for other manufacturers’ equipment
supporting VIERA Link function.
The TV with “HDAVI Control 2 or later” function enables the following
operation: VIERA Link Control only with TV’s remote control (for
“HDAVI Control 2 or later”) (B 21).
Preparation
Confirm that the HDMI connection has been made (B 7).
Set “VIERA Link” to “ON” (B 24, HDMI menu).
To complete and activate the connection correctly, turn on all VIERA
Link “HDAVI Control” compatible equipment and set the TV to the
corresponding HDMI input mode for this unit.
Whenever the connection or settings are changed, reconfirm the points
above.
(Available when using VIERA Link “HDAVI Control” with
“HDAVI Control 3 or later” compatible TV)
This function automatically provides synchronised audio and video
output. (This works only when the source is “DVD/CD”, “USB”, “AUX” or
“D-IN”.)
When using “DVD/CD” or “USB” as the source, set “TIME DELAY” in
VIDEO menu to “0 ms/AUTO” (B 23).
You can turn on this unit and the TV, and start playing the disc with a
single press of a button.
[Note]
Playback may not be immediately displayed on the TV. If you miss the
beginning portion of playback, press [:] or [6] to go back to where
playback started.
When you switch the TV input to TV tuner mode, this unit will
automatically switch to “AUX”
§
or “D-IN”
§
.
When this unit is in “DVD/CD” mode, the TV will automatically switch its
input mode for this unit.
When playback stops ([DVD-V] [VCD]) or when this unit turns off, the TV
will automatically return to TV tuner mode.
When you select
“AUX”
§
or “DIGITAL IN”
§
from “Input Selection” in
START menu (B 11), the TV will automatically switch to TV tuner mode.
When the TV is turned off, this unit goes into standby mode automatically.
To continue audio playback even when the TV is turned off, select
“VIDEO” (B 24, “POWER OFF LINK” in HDMI menu).
[Note]
When you press [Í], only this unit turns off. Other connected equipment
compatible with VIERA Link “HDAVI Control” stays on.
If this unit is connected to a “HDAVI Control 4” compatible TV with the
“Intelligent Auto Standby” setting activated on the TV, the main unit will
be automatically turned to standby under the following conditions:
e.g.,
For details, refer also to the operating instructions for your TV.
Setting the TV audio for VIERA Link “HDAVI Control”
Select “AUX” or “DIGITAL IN” to work with the linked operations.
Refer to TV audio setting in Easy setup (B 9) or “TV AUDIO” in HDMI
menu (B 24).
Confirm the audio connection to the AUX terminal (for “AUX”) or
OPTICAL IN terminal (for “DIGITAL IN”) (B 7).
§
“AUX” or “D-IN” (“DIGITAL IN”) works depending on the TV audio
setting (B above, Setting the TV audio for VIERA Link “HDAVI
Control”).
SEARCH
SKIP
PLAY
SEARCH
SKIP
PLAY
Auto lip sync
One touch play
During standby mode (Remote control only)
Start disc playback.
This unit’s speakers will be automatically
activated (B 21).
Auto input switching
Power off link
– when changing the TV input from the one the main unit is
connected to
– when changing the speaker use from this unit’s speakers to the
TV speakers
PLAY
20
SC-PT170-175EP-RQTX0241-R_eng.book Page 20 Wednesday, February 4, 2009 12:19 PM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104

Panasonic SC-PT170 Instrukcja obsługi

Kategoria
Odtwarzacze DVD
Typ
Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla

w innych językach