Yamaha GX-707 Instrukcja obsługi

Marka: Yamaha

Model: GX-707

Kategoria: Odtwarzacze CD

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

GX707

UCA

DISC

OPEN

DISC CHANGE

DISC

3–DISC CD CHANGER

STANDBY

TIMER

PROGRAM B.BOOST MUSIC

INPUT

PRESET

TUNING

BAND A

VOLUME

DOWN

DIRECTION

AUTO REVERSE CASSETTE DECK

MINI COMPONENT SYSTEM GX

–

707

DOLBY B NR

OPEN

DOLBY SURROUND

PRO•LOGIC

DIGITAL AUDIO

Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an

equilateral triangle, is intended to alert you to the

presence of uninsulated “dangerous voltage” within

the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle

is intended to alert you to the presence of important

operating and maintenance (servicing) instructions in

the literature accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED SERVICE PERSONNEL.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR

MOISTURE.

IMPORTANT

Please record the serial number of this system in the space

below.

Model:

Serial No.:

The serial number is located on the rear of the main unit.

Retain this Owner’s Manual in a safe place for future

reference.

SAFETY INSTRUCTIONS

1 Read Instructions – All the safety and operating

instructions should be read before the unit is

operated.

2 Retain Instructions – The safety and operating

instructions should be retained for future reference.

3 Heed Warnings – All warnings on the unit and in the

operating instructions should be adhered to.

4 Follow Instructions – All operating and other

instructions should be followed.

5 Water and Moisture – The unit should not be used

near water – for example, near a bathtub, washbowl,

kitchen sink, laundry tub, in a wet basement, or near

a swimming pool, etc.

6 Carts and Stands – The unit should be used only with

a cart or stand that is recommended by the

manufacturer.

6A A unit and cart combination should be

moved with care. Quick stops,

excessive force, and uneven surfaces

may cause the unit and cart combination

to overturn.

7 Wall or Ceiling Mounting – The unit should be

mounted to a wall or ceiling only as recommended by

the manufacturer.

8 Ventilation – The unit should be situated so that its

location or position does not interfere with its proper

ventilation. For example, the unit should not be

situated on a bed, sofa, rug, or similar surface, that

may block the ventilation openings; or placed in a

built-in installation, such as a bookcase or cabinet

that may impede the flow of air through the

ventilation openings.

9 Heat – The unit should be situated away from heat

sources such as radiators, stoves, or other appliances

that produce heat.

10 Power Sources – The unit should be connected to a

power supply only of the type described in the

operating instructions or as marked on the unit.

11 Power-Cord Protection – Power-supply cords should

be routed so that they are not likely to be walked on

or pinched by items placed upon or against them,

paying particular attention to cords at plugs,

convenience receptacles, and the point where they

exit from the unit.

12 Cleaning – The unit should be cleaned only as

recommended by the manufacturer.

13 Nonuse Periods – The power cord of the unit should

be unplugged from the outlet when left unused for a

long period of time.

14 Object and Liquid Entry – Care should be taken so

that objects do not fall into and liquids are not spilled

into the inside of the unit.

15 Damage Requiring Service – The unit should be

serviced by qualified service personnel when:

A. The power-supply cord or the plug has been

damaged; or

B. Objects have fallen, or liquid has been spilled into

the unit; or

C. The unit has been exposed to rain; or

D. The unit does not appear to operate normally or

exhibits a marked change in performance; or

E. The unit has been dropped, or the cabinet

damaged.

16 Servicing – The user should not attempt to service the

unit beyond those means described in the operating

instructions. All other servicing should be referred to

qualified service personnel.

17 Power Lines – An outdoor antenna should be located

away from power lines.

18 Grounding or Polarization – Precautions should be

taken so that the grounding or polarization is not

defeated.

19 For US customers only:

Outdoor Antenna Grounding – If an outside antenna

is connected to this unit, be sure the antenna system

is grounded so as to provide some protection against

voltage surges and built-up static charges. Article

810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding

of the mast and supporting structure, grounding of the

lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna discharge

unit, connection to grounding electrodes, and

requirements for the grounding electrode.

Note to CATV system installer:

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in

particular, specifies that the cable ground shall be

connected to the grounding system of the building, as

close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING

MAST

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810–20)

GROUNDING CONDUCTORS

(NEC SECTION 810–21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

ELECTRIC

SERVICE

EQUIPMENT

NEC

– NATIONAL ELECTRICAL CODE

FCC INFORMATION (for US customers only)

1. IMPORTANT NOTICE : DO NOT MODIFY

THIS UNIT!

This product, when installed as indicated in the

instructions contained in this manual, meets FCC

requirements. Modifications not expressly

approved by Yamaha may void your authority,

granted by the FCC, to use the product.

2. IMPORTANT : When connecting this product to

accessories and/or another product use only high

quality shielded cables. Cable/s supplied with this

product MUST be used. Follow all installation

instructions. Failure to follow instructions could

void your FCC authorization to use this product in

the USA.

3. NOTE : This product has been tested and found

to comply with the requirements listed in FCC

Regulations, Part 15 for Class “B” digital devices.

Compliance with these requirements provides a

reasonable level of assurance that your use of this

product in a residential environment will not result

in harmful interference with other electronic

devices.

This equipment generates/uses radio frequencies

and, if not installed and used according to the

instructions found in the users manual, may cause

interference harmful to the operation of other

electronic devices.

Compliance with FCC regulations does not

guarantee that interference will not occur in all

installations. If this product is found to be the

source of interference, which can be determined

by turning the unit “OFF” and “ON”, please try to

eliminate the problem by using one of the

following measures:

Relocate either this product or the device that is

being affected by the interference.

Utilize power outlets that are on different branch

(circuit breaker or fuse) circuits or install AC line

filter/s.

In the case of radio or TV interference, relocate/

reorient the antenna. If the antenna lead-in is 300

ohm ribbon lead, change the lead-in to coaxial

type cable.

If these corrective measures do not produce

satisfactory results, please contact the local

retailer authorized to distribute this type of

product. If you can not locate the appropriate

retailer, please contact Yamaha Electronics Corp.,

U.S.A. 6660 Orangethorpe Ave, Buena Park, CA

90620.

The above statements apply ONLY to those

products distributed by Yamaha Corporation of

America or its subsidiaries.

We Want You Listening For A Lifetime

YAMAHA and the Electronic Industries Association’s Consumer

Electronics Group want you to get the most out of your

equipment by playing it at a safe level. One that lets the sound

come through loud and clear without annoying blaring or

distortion – and, most importantly, without affecting your

sensitive hearing.

Since hearing damage from loud sounds is often

undetectable until it is too late, YAMAHA and the

Electronic Industries Association’s Consumer

Electronics Group recommend you to avoid

prolonged exposure from excessive volume levels.

Unpacking ● After unpacking, check that the following parts are contained.

Déballage ● Après le déballage, vérifier que les pièces suivantes sont incluses.

● Main unit

● Appareil principal

● Remote control

● Télécommande

● Batteries (size AA, UM/SUM-3, R6, HP-7)

● Piles (format AA, UM/SUM-3, R6, HP-7)

● Mounting brackets

● Supports de montage

● Screws

● Vis

● Velcro strips

● Bandes Velcro

● Front speakers

● Enceintes avant

● Indoor FM antenna

● Antenne intérieure FM

● AM loop antenna

● Antenne-cadre AM

● Speaker cords

● Câbles d'enceintes

● Rear speakers

● Enceintes arrière

● Center speaker

● Enceinte centrale

DISC3

OPEN

DISC CHANGE

DISC2DISC1

3–DISC CD CHANGER

STANDBY

TIMER

PROGRAM B.BOOST MUSIC

INPUT

PRESET

TUNING

BAND A

VOLUME

DOWN

DIRECTION

AUTO REVERSE CASSETTE DECK

MINI COMPONENT SYSTEM GX

–

707

DOLBY B NR

OPEN

DOLBY SURROUND

PRO•LOGIC

DIGITAL AUDIO

POWER

PRESET

TUNER

PRESET

TIME

PROG

R.TIME

EDIT

DISC SKIP

MODE

DIRECTION

LEVEL

REC

PAUSE

TEST

—

PROGRAM

CENTER

REAR

DELAY

MUSIC

SLEEP

INPUT

TAPE

VOLUME

Setting this system Installation de ce système

English

Set this system by allowing enough spaces around and behind the main unit to assure good ventilation. Be sure not to place

another unit or any object on top of the main unit to prevent the ventilation holes from being obstructed. Otherwise, it may

cause fire or damage to the main unit.

Caution

When placing the speakers apart from the main unit, be sure to allow spaces of at least 20 cm (3-15/16”) above, behind and

on both sides of the main unit. If the main unit is put inside a rack, the front of it must be fully opened.

Français

Installer ce système en laissant assez d’espace autour et derrière l’appareil principal pour assurer une bonne ventilation.

Veiller à ne pas empiler un autre appareil ou un autre objet sur l’appareil principal afin de ne pas boucher les orifices de

ventilation. Sinon, on risquerait de provoquer un incendie ou d’endommager l’appareil principal.

Attention

Lorsqu’on place les enceintes à une certaine distance de l’appareil principal, veiller à laisser un espace d’au moins 20 cm

au-dessus, derrière et sur les deux côtés de l’appareil principal. Si l’on place l’appareil principal dans un meuble, veiller à ce

que le côté avant du meuble soit grand ouvert.

1 cm 1 cm

20 cm20 cm

20 cm

20 cm 20 cm

20 cm

DISC3

OPEN

DISC CHANGE

DISC2DISC1

3–DISC CD CHANGER

STANDBY

TIMER

PROGRAM

B.BOOST MUSIC

INPUT

PRESET

TUNING

BAND A

VOLUME

DOWN

DIRECTION

AUTO REVERSE CASSETTE DECK

MINI COMPONENT SYSTEM GX

–

707

DOLBY B NR

OPEN

DIGITAL AUDIO

DISC3

OPEN

DISC CHANGE

DISC2DISC1

3–DISC CD CHANGER

STANDBY

TIMER

PROGRAM

B.BOOST MUSIC

INPUT

PRESET

TUNING

BAND A

VOLUME

DOWN

DIRECTION

AUTO REVERSE CASSETTE DECK

MINI COMPONENT SYSTEM GX

–

707

DOLBY B NR

OPEN

DIGITAL AUDIO

Front panel

Front panel Panneau avant

DISC 3

OPEN

DISC CHANGE

DISC 2DISC 1

3–DISC CD CHANGER

STANDBY

TIMER

PROGRAM

B.BOOST MUSIC

INPUT

PRESET

TUNING

BAND A

VOLUME

DOWN

DIRECTION

AUTO REVERSE CASSETTE DECK

DOLBY B NR

OPEN

PHONES

BASS TREBLE

MODE DOLBY NR

REC

PAUSE

AUTO

MANUAL

TIMER

MEMORY

TIME ADJ

RANDOM

HOUR

REPEAT

TIME DISPLAY

MIN

DIGITAL AUDIO

LM NO

0, P

F, S

G, U

[

]

Q, A

R, B

1 Display

Panneau d'affichage

2 Remote control sensor

Capteur de télécommande

3 TIMER

4 STANDBY [p. 13]

5 B. BOOST [p. 32]

6 PROGRAM [p. 35]

7 PHONES [p. 33]

Amplifier/tuner Amplificateur/tuner

8 BASS/TREBLE [p. 32]

9 Front cover

Couvercle avant

0 / [p. 20, 22]

A A/B/C/D/E [p. 22]

B PRESET/TUNING/BAND

[p. 20]

C VOLUME [p. 32]

D MUSIC [p. 33]

E INPUT( / ) [p. 13, 20,

24, 26]

TUNER → TAPE → CD

↑↓

AUX/MD ← VCR ← VIDEO

F HOUR [p. 10, 37]

G MIN [p. 10, 37]

H DISPLAY [p. 10, 37]

I MEMORY [p. 21, 22]

TIME ADJ [p. 10]

J STANDBY/ON [p. 13]

K AUTO/MANUAL [p. 20]

TIMER [p. 37, 38]

L Disc tray

Plateau de disque

[p. 13]

M DISC (1, 2, 3) [p. 14]

N DISC CHANGE [p. 13]

O OPEN/CLOSE [p. 13]

P ( )/ ( ) [p. 15]

Q / [p. 13]

R [p. 13]

S RANDOM [p. 18]

T TIME [p. 18]

U REPEAT [p. 17]

V Tray

Plateau

[p. 24]

W MODE [p. 24]

X OPEN/CLOSE [p. 24]

Y DIRECTION [p. 24]

Z / [p. 25]

[ [p. 24]

\ [p. 24]

] REC/PAUSE [p. 26]

` DOLBY NR [p. 23, 26]

CD player Lecteur de disque compact

Tape deck Platine cassette

Remote control Telecommande

POWER

PRESET

TUNER

PRESET

TIME

PROG

R.TIME

EDIT

DISC SKIP

MODE

DIRECTION

LEVEL

REC

PAUSE

TEST

—

PROGRAM

CENTER

REAR

DELAY

MUSIC

SLEEP

INPUT

TAPE

VOLUME

POWER

PRESET

TUNER

PRESET

TIME

PROG

R.TIME

EDIT

DISC SKIP

MODE

DIRECTION

LEVEL

REC

PAUSE

TEST

—

PROGRAM

CENTER

REAR

DELAY

MUSIC

SLEEP

INPUT

TAPE

VOLUME

1 Transmission window

Fenêtre de transmission

[p. 5]

2 Numeric buttons

Touches numériques

[p. 22]

3 A, B, C, D, E [p. 22]

4 TEST [p. 11]

5 CENTER/REAR/DELAY [p. 36]

6 LEVEL (–/+) [p. 36]

E Numeric buttons

Touches numériques

[p. 14]

F TIME [p. 16]

G PROG [p. 16]

7 POWER [p. 13]

8 SLEEP [p. 38]

9 PRESET ( / ) [p. 20, 22]

0 TUNER [p. 20]

A PROGRAM [p. 35]

B MUSIC [p. 33]

C VOLUME [p. 32]

D INPUT [p. 13, 20, 24, 26]

TUNER → TAPE → CD

↑↓

AUX/MD ← VCR ← VIDEO

H MODE [p. 14]

I DISC SKIP [p. 14]

J ( )/ ( )

[p. 15]

K [p. 13]

L / [p. 13]

M EDIT [p. 28, 29, 30]

N R. TIME [p. 28, 29, 30]

Amplifier/tuner Amplificateur/tuner

CD player

Lecteur de disque compact

Tape deck Platine cassette

O REC/PAUSE [p. 26]

P / [p. 25]

Q [p. 24]

R [p. 24]

S DIRECTION [p. 24]

For basic source play, the following illustrations on top of the

pages will help you look for the section you need.

...... CD play .......Tuning

...... Tape playback/recording

Contents

Precautions....................................... 1

Features ............................................ 4

Preparations and connections........ 5

Installing batteries in the remote control............. 5

Remote control operation range ......................... 5

Setting up the speakers...................................... 6

Connections........................................................ 8

Setting the clock ............................................... 10

Adjusting brightness of the display ................... 10

Speaker balance adjustment ............................ 11

CD player operation ....................... 12

Basic play ......................................................... 13

To change the disc play mode .......................... 14

To select another disc....................................... 14

To directly select the desired track.................... 14

To play the desired track (Skip) ........................ 15

To advance or reverse play rapidly (Search) .... 15

To exchange a disc (or discs) while playing

(PLAYXCHANGE) ........................................ 15

Program play .................................................... 16

Repeat play ...................................................... 17

Random play .................................................... 18

Switching the time display ................................ 18

Tuning operation ............................ 19

Automatic tuning............................................... 20

Manual tuning ................................................... 20

Automatic preset tuning.................................... 21

Manual preset tuning ........................................ 22

Playing back a tape........................ 23

General information .......................................... 23

Basic operation................................................. 24

Winding the tape............................................... 25

Searching for the beginning of

the desired selection .................................... 25

Recording ....................................... 26

Basic recording................................................. 26

Recording from CDs

utilizing the EDIT function ............................ 28

Operating an external unit

connected to this system ........... 31

Various sound control ................... 32

General sound control ...................................... 32

Graphic equalizer ............................................. 33

Sound field processor....................................... 34

Using the built-in timer .................. 37

Timer play ......................................................... 37

Timer recording................................................. 38

Sleep timer operation ....................................... 38

Appendix......................................... 39

Troubleshooting................................................ 39

Specifications ................................................... 41

English

Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment.

For the best performance, read this manual carefully. It will guide you in operating your YAMAHA product.

E-1

English

■ To assure the finest performance, please read this manual

carefully. Keep it in a safe place for future reference.

■ Choose the installation location of this system carefully. Avoid

placing it in direct sunlight or close to a source of heat. Also

avoid locations subject to vibration and excessive dust, heat,

cold or moisture. Keep it away from sources of hum such as

transformers and electric motors.

■ Do not operate this system upside-down. It may overheat,

possibly causing damage.

■ Never open the cabinet. If something drops into the set, contact

your dealer.

■ The openings on the main unit cover assure proper ventilation

of the main unit. If these openings are obstructed, the

temperature inside the main unit will rise rapidly. Avoid

placing objects against these openings, and install the main

unit in a well-ventilated area to prevent fire or damage.

■ Always set the VOLUME control to minimum before starting

an audio source play. Increase the volume gradually to an

appropriate level after play has started.

■ When not planning to use this system for a long period of time

(ie., vacation, etc.), disconnect the AC power plug from the

wall outlet.

■ Grounding or polarization – Precautions should be taken so

that the grounding or polarization of this system is not

defeated.

■ Do not use force on switches, controls or connection wires.

When moving the main unit, first disconnect the power plug

and the wires connected to other equipments. Never pull the

wire itself.

■ If an external appliance (TV, radio, etc.) interferes with the

operation of this system, move the main unit away from such

appliance.

■ Do not attempt to clean this system with chemical solvents;

this might damage the finish. Use a clean, dry cloth.

■ Be sure to read the “Troubleshooting” section regarding

common operating errors before concluding that this system is

faulty.

■ To prevent lightning damage, disconnect the AC power plug

and the antenna cable when there is an electric storm.

■ Do not plug the AC power plug to the wall socket before you

finish all connections.

■ Never allow metallic items (e.g. screwdrivers, tools, etc.) to

come near the tape deck’s record/playback head assembly.

Doing so may not only scratch or damage the head’s mirror-

smooth finish, it may change the magnetic characteristics of

the heads, causing a deterioration in reproduction performance

quality.

■ Although the tape deck’s record/playback heads are of high

quality with outstanding reproduction characteristics, they can

get dirty through the use of old tapes or from dust

accumulation over time. This can have a serious effect on

reproduction quality. Clean the heads regularly with

commonly available head cleaners or with cleaning solutions.

■ The voltage to be used must be the same as that specified on

this system. Using this system with a higher voltage than

specified is dangerous and may result in a fire or other types of

accidents causing damage. YAMAHA will not be held

responsible for any damage resulting from use of this system

with a voltage other than specified.

■ The sound level at a given volume setting depends on speaker

location and other factors. Care should be taken to avoid

exposure to sudden high levels of sound, which may occur

when turning this system on with the volume control setting at

high. Also avoid exposure to continuous high levels of sound.

■ Sudden temperature changes and storage or operation in an

extremely humid environment may cause condensation inside

the cabinet. Condensation can cause this system to

malfunction.

To eliminate condensation:

• Pickup

Leave the power on with no disc loaded until normal play

becomes possible (about 1 hour).

• Tape head

Leave the power on with no tape loaded until normal

playback becomes possible (about 1 hour).

Note:

If condensation forms on the tape head, dirt or dust may

accumulate during use.

• Remote control

Wipe off condensation on the transmission window with a

soft cloth before operating this system.

■ The carousel will turn when you open the disc tray by pressing

OPEN/CLOSE; therefore, make sure the carousel stopped

moving completely before you perform further operations such

as placing or removing a disc from the disc tray. Otherwise,

you may cause damage to your discs, or you might injure

yourself.

Precautions: Read this before operating your system

E-2

As the laser beam used in this unit is harmful to the eyes, do not

attempt to disassemble the cabinet. Refer servicing to qualified

personnel only.

This system is not disconnected from the AC power source as

long as it is connected to the wall outlet, even if this system

itself is turned off. This state is called the standby mode.

In this state, this system is designed to consume a certain

amount of power.

Note

Please check the copyright laws in your country to record

from records, compact discs, radio, etc. Recording of

CAUTION FOR CARRYING THE MAIN UNIT

Be sure not to carry or tip the main unit with discs

in it.

WARNING

To reduce the risk of fire or electric shock, do not expose this

system to rain or moisture.

To avoid electric shock, do not open the cabinet. Refer

servicing to qualified personnel only.

CAUTION

Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous

radiation exposure.

Laser component in this product is capable of emitting

radiation exceeding the limit for Class 1.

Precautions: Read this before operating your system

CAUTION FOR MOVING THE MAIN UNIT

Before moving the main unit, first remove all discs from the

disc tray and close the tray by pressing the

OPEN/

CLOSE button. After you confirm that “NO DISC” lights up

on the display, turn this system into the standby mode by

pressing the STANDBY/ON switch, and then disconnect the

power plug from the AC outlet.

For Canadian Customers

To prevent electric shock, match wide blade of plug to wide

slot and fully insert.

This Class B digital apparatus complies with Canadian ICES–

003.

E-3

English

Precautions: Read this before operating your system

To prevent a malfunction of this

system:

• Do not use any nonstandard shaped disc

(heart etc.) available on the market

because it might damage the system.

• Do not use a disc with tape, seals, or

paste on it. If you use such a disc, a disc may get stuck

in the system, or damage to the system may result.

Notes about handling discs

• Always handle the disc with care so that its surface is not

scratched.

• Discs are not subjected to wear during play, but damage to the

disc surface when the disc is being handled can adversely

affect the disc’s play.

• Be sure to use a felt-tip pen or similar writing tool when

writing on the label side of the disc. Do not use a ball-point

pen, pencil, or other hard-tipped writing tool, as these may

damage the disc and may adversely affect the disc’s play.

• Do not warp discs.

• When a disc is not currently being used, remove it from the

system and store in an appropriate case.

• When removing or storing a disc, be careful not to scratch the

playing surface.

• Discs are not affected by small particles of dust or fingerprints

on their playing surface, but even so they should be kept clean.

Wipe by using a clean, dry cloth. Do not wipe with a circular

motion; wipe straight outward from the center.

• Do not try to clean the disc’s surface by using any type of disc

cleaner, record spray, anti-static spray or liquid, or any other

chemical-based liquid because such substances might

irreparably damage the disc’s surface.

• Do not expose discs to direct sunlight, high temperature or

high humidity for a long period of time because these might

warp or otherwise damage the disc.

No!

To play an 8-cm CD

Place it in the inner recessed area of the disc tray. Do not put a

normal (12-cm) CD on top of an 8-cm CD.

NOTES ABOUT DISCS

E-4

Features

General

• 5-Speaker Multi-Channel Audio System (Two

Front, One Center and Two Paralleled Rear

Speakers)

• High Power Output

Front L, R: 80W + 80W (6Ω) RMS, 0.9% THD, 1

kHz

Center: 80W (6Ω) RMS Output Power, 0.9%

THD, 1 kHz

Rear: 25W (6Ω) RMS Output Power, 0.9%

THD, 1 kHz

• 4 External Audio/Video Component Connecting

Capability

• Multi-Use Timer/Sleep Timer

• SUBWOOFER Output for Low Frequency

Expansion

• Remote Control Capability

• BASS BOOST

• 5-Band Spectrum Analyzer

• DOLBY PRO LOGIC and DOLBY 3 STEREO

Decoding

• Sound Field Processing (HALL and YMERSION)

• Test Tone Generator for Easier Speaker Balance

Adjustment

• 3 Preset Graphic Equalizer Modes (ROCK, POPS

and JAZZ)

• Balance control for the left and right main

speakers in DOLBY PRO LOGIC mode

CD Player

• 3-Disc Carousel Type CD Changer

• PLAY

CHANGE

Disc changing while playing

• 20-Track Random Access Programming

• Repeat Play for Single Track/Entire Disc/All

Discs

• Random Sequence Play

Tape Deck

• Automatic Synchronized Recording with CD

• EDIT Function Useful for Recording CD(s)

• Automatic Reverse

• Dolby B Type Noise Reduction System

Tuner

• 40 Station Preset Tuning

• Automatic Preset Tuning

E-5

English

Preparations and connections

1Turn the remote control over and remove the battery

compartment cover by sliding it in the direction of the

mark.

2Insert the batteries (AA, R6, UM-3 type) according to the

polarity markings on the inside of the battery compartment.

3Attach the battery compartment cover.

Notes

• Be sure the polarities are correct. (see the illustration inside the battery

compartment.)

• Remove the batteries if the remote control is not used for an extended

period of time.

• If batteries leak, dispose of them immediately. Avoid touching the leaked

material or letting it come in contact with clothing, etc. Clean the battery

compartment thoroughly before installing new batteries.

• Be sure to use the same type of batteries.

• Do not use a new battery and an old battery together.

Notes

• The area between the remote control and the main unit must be clear of

large obstacles.

• Do not expose the remote control sensor to strong lighting, in particular,

an inverter type fluorescent lamp. Otherwise, the remote control may not

work properly. If necessary, position the main unit away from direct

lighting.

Battery replacement

If you find that the remote control must be used closer to the main

unit, the batteries are weak. Replace both batteries with new ones.

DISC

OPEN

DISC CHANGE

DISC

3–DISC CD CHANGER

STANDBY

TIMER

PROGRAM B.BOOST MUSIC

INPUT

PRESET

TUNING

BAND A

VOLUME

DOWN

DIRECTION

AUTO REVERSE CASSETTE DECK

MINI COMPONENT SYSTEM GX

–

707

DOLBY B NR

OPEN

DOLBY SURROUND

PRO•LOGIC

DIGITAL AUDIO

30°

0.2 m – 6 m

(8” – 20’)

Installing batteries in the remote control

Remote control operation range

E-6

Preparations and connections

■4 channel 5 speaker configuration

This system employs a 5 speaker configuration: 2 front speakers, 2

rear paralleled speakers and a center speaker.

The front speakers are used for outputting main source sound. The

rear speakers are for effect and surround sounds when the sound

field program

PRO LOGIC or HALL is selected. The center

speaker is for center sounds (dialogue etc.) when the sound field

program PRO LOGIC or 3 STEREO is selected.

■Placing the speakers

Front speakers: On both sides of and at approximately the

same height as the TV.

Center speaker: Precisely between the front speakers.

Rear speakers: Behind your listening position, facing

slightly inward. About 1.8 m (approx. six

feet) from the floor.

Subwoofer: The position of the subwoofer is not so

critical because low bass tones are not highly

directional. However, we recommend that

you place the subwoofer anywhere in front of

your listening position.

■Mounting the center speaker

Place the speaker on top of the TV or on the floor under the TV or

inside the TV rack so that it is stable.

When placing the speaker on top of the TV, put the provided velcro

strips at two corners on both the bottom of the speaker and top of

the TV to prevent the speaker from falling.

Setting up the speakers

Front L

Center

Front R

Rear L Rear R

Dialogue

Front L

Center

Front R

(Subwoofer)

(TV set)

Rear L

Rear R

Velcro strip

TV set

(not included in

this system)

E-7

English

Preparations and connections

■Mounting the rear speakers

Mount the rear speakers on a shelf, rack or on the floor, or hang

them on the wall.

To mount the rear speakers by using commercially

available speaker stands

The provided mounting bracket has 1 pair of screw holes (at an

interval of 60 mm). They are for mounting the speaker on a speaker

stand.

* These screw holes can be used with M4 screws only.

Note

It is recommended that you connect the speaker cords to the

speaker’s terminals before attaching the bracket to the speaker.

1 Attach the bracket to the bottom of the speaker by using the

provided screw so that the convex part of the bracket fits in the

grooved part of the speaker as shown left.

2 Mount the speaker on the speaker stand by using the screw holes

on the bracket.

To mount the rear speakers directly on the wall

If desired, you can hang the speaker on the protruding screws on

the wall without using the bracket.

Fasten screws into a firm wall or wall support as shown left, and

hang the holes of the speaker on the protruding screws.

* Make sure that the screws are securely caught by a narrow part

of the holes.

WARNING

• Each of the rear speakers weighs 0.8 kg (1 lbs. 12 oz.). Do not

mount them on thin plywood or soft wall surface material, as the

screws may come out of the flimsy surface, causing the speakers

to fall and be damaged, or result in personal injury.

• Do not fasten the speakers to the wall with nails, adhesives, or

other unstable hardware. Long-term use and vibrations may

cause them to fall.

• To avoid accidents resulting from tripping over loose speaker

cords, fix them to the wall.

• Select a proper position on the wall to mount the speaker and the

stand so that no one will injure his/her head or face with the edge

of the stand.

60 mm

Tapping screw (Available

at the hardware store)

Min.

12 mm

65 mm

Wall or wall support

Mounting bracket

Screw

E-8

MAINS

SUBWOOFER

OUT

VIDEO SIGNAL

OUT

VCR

VIDEO

R L

OUT

AUX/MD

SPEAKERS

SEE OWNER'S MANUAL

FOR CONNECTION.

REAR CENTER REAR

R L

CENTER: 6 MIN./SPEAKER

REAR: 12 MIN./SPEAKER

FRONT

R L

6 MIN./SPEAKER

SPEAKERS

MONITOR

OUT

L R

Preparations and connections

Connections

Never plug the AC supply lead of this system into the AC outlet until all connections are

completed.

On the main unit

Red: positive (+)

Black: negative (–)

Caution

Do not let the bare speaker wires touch each other as this could damage the amplifier and/or speakers.

When connecting a subwoofer (not included in this system)

You may wish to add a subwoofer to reinforce the bass frequencies.

When connecting a subwoofer to this system, connect the SUBWOOFER OUT terminal of this system to the INPUT

terminal of the subwoofer.

* Ordinary subwoofers, including the Yamaha Active Servo Processing Subwoofer System, are designed so that both the

amplifier and subwoofer are contained in the same unit.

* The SUBWOOFER OUT terminal outputs low frequencies from the left front, center and right front channels.

(The cut-off frequency of this terminal is 200 Hz.)

■ Connecting speakers

Connect the speakers to the corresponding speaker terminals on the rear of the main unit by using the speaker cords. Make

sure that the polarity of the speaker cords is correct, that is the + and – markings are observed. If these cords are reversed,

the sound will be unnatural and lack bass.

Subwoofer system

(not included in this system)

Rear speaker

Center speaker

Rear speaker

INPUT

Front speakers

To AC outlet

On the speakers

Red: positive (+)

Black: negative (–)

1Press the tab.

2Insert the bare wire.

[Remove approx. 5mm (1/

4”) insulation from the

speaker wires.]

3Release the tab and secure

the wire.

1Pull up the tab.

2Insert the bare wire.

[Remove approx. 5mm (1/

4”) insulation from the

speaker wires.]

3Press down the tab and

secure the wire.

E-9

English

DIGITAL OUT

OPTICAL

SUBWOOFER

OUT

VCR

VIDEO

R L

OUT

AUX/MD

SEE

FOR

REAR

CENTE

REAR:

VIDEO SIGNAL

MONITOR

OUT

FREQUENCY STEP

100

FM AM

DIGITAL OUT

OPTICAL

ANTENNA

FM GND AM

75 UNBAL.

ANTENNA

FM GND AM

75 UNBAL.

ANTENNA

FM GND AM

75 UNBAL.

FREQUENCY STEP

50KH Z 9 KHZ

100 KHZ 10 KHZ

FM AM

(1)

(2)

Preparations and connections

■Antenna connection

(1) Supplied FM antenna

Connect the FM antenna wire to the corresponding terminal and

direct it to the direction where the strongest signal can be received.

(2) Supplied AM loop antenna

Connect the AM loop antenna wires to the corresponding

terminals. Position the AM loop antenna for optimum reception.

Notes

• When static is still heard even after adjusting the position of the AM loop

antenna, try reversing the wire connections (from the right terminal to

the left one, and vice versa).

• The AM loop antenna should be placed apart from the main unit. The

antenna may be hung on a wall.

Using an external antenna

• If you need better reception, use an external FM antenna instead

of an indoor FM antenna. Consult your dealer.

• Use an external AM antenna if you need better reception.

Consult your dealer.

■Connecting external components

This system can be connected with external audio and video

components. Make connections between this system and the

components using RCA pin plug connector cables, by correctly

connecting L (left) to L and R (right) to R. Also, refer to the

owner’s manual for the component to be connected to this system.

* A digital-to-digital recording is possible from a CD played on

the built-in CD player to an MD (or tape) on an external MD

recorder (or DAT) by connecting the DIGITAL OUT

(OPTICAL) terminal on the rear of the main unit to the MD

recorder (or DAT).

TV monitor

VCR

LD/DVD player, etc.

MD recorder, etc.

E-10

Setting the clock

1 While the power is on, press DISPLAY to display time.

2 While holding down TIME ADJ, press HOUR and set the hour.

* Press HOUR once to advance the time by 1 hour. Press and

hold to advance continuously.

3 While holding down TIME ADJ, press MIN and set the minute.

* Press MIN once to advance the time by 1 minute. Press and

hold to advance continuously.

* The hour setting will not advance even if minute is advanced

from “59” to “00”.

Australia model uses a 24-hour display. U.S.A. and Canada

models use a 12-hour display. For General model, either the 24-

hour display or the 12-hour display [shown by “AM (PM)

12:00”] is selected depending on the setting of the

FREQUENCY STEP switch on the rear panel.

* Set this system into the standby mode and disconnect the AC supply

lead when switching the FREQUENCY STEP.

Note

In the event of a power failure or when the AC supply lead is disconnected,

the time display will go out; however, the clock will function for about 5

minutes without any power supply. Otherwise, the time display will flash

on and off to indicate that time must be reset.

Adjusting brightness of the display

If desired, you can adjust the brightness of the display.

Press and hold DISPLAY for more than 2 seconds so that

“DIMMER ±0” appears on the display.

While holding down DISPLAY, turn VOLUME clockwise to

increase or counterclockwise to decrease brightness.

Control range: ±0 to –6 (Preset value: ±0)

Preparations and connections

DISC3

OPEN

DISC CHANGE

DISC2DISC1

3–DISC CD CHANGER

STANDBY

TIMER

PROGRAM

B.BOOST MUSIC

INPUT

PRESET

TUNING

BAND A

VOLUME

DOWN

DIRECTION

AUTO REVERSE CASSETTE DECK

DOLBY B NR

OPEN

PHONES

BASS TREBLE

MODE DOLBY NR

REC

PAUSE

AUTO

MANUAL

TIMER

MEMORY

TIME ADJ

RANDOM

HOUR

REPEAT

TIME DISPLAY

MIN

DIGITAL AUDIO

DISPLAY

MEMORY

RANDOM

TIME ADJ

REPEAT

HOUR

MIN

MEMORY

RANDOM

TIME ADJ

REPEAT

HOUR

MIN

Changes.

OPEN

DISC CHANGE

PROGRAM B.BOOST MUSIC

VOLUME

DOWN

RANDOM

HOUR

REPEAT

TIME DISPLAY

MIN

DIGITAL AUDIO

VOLUME

DISPLAY

Strona jest ładowana ...

Yamaha GX-707 Instrukcja obsługi

Marka: Yamaha

Model: GX-707

Kategoria: Odtwarzacze CD

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

GX707

ściągnij PDF

raport

w innych językach

čeština: Yamaha GX-707 Uživatelský manuál
español: Yamaha GX-707 Manual de usuario
italiano: Yamaha GX-707 Manuale utente
Deutsch: Yamaha GX-707 Benutzerhandbuch
svenska: Yamaha GX-707 Användarmanual
português: Yamaha GX-707 Manual do usuário
français: Yamaha GX-707 Manuel utilisateur
Türkçe: Yamaha GX-707 Kullanım kılavuzu
English: Yamaha GX-707 User manual
dansk: Yamaha GX-707 Brugermanual
русский: Yamaha GX-707 Руководство пользователя
suomi: Yamaha GX-707 Ohjekirja
Nederlands: Yamaha GX-707 Handleiding
română: Yamaha GX-707 Manual de utilizare

Yamaha GX-707 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Yamaha GX-707 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty