Electrolux EXP11HSECI Instrukcja obsługi

Typ
Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

EN AIR CONDITIONER
FR CLIMATISEUR
IT CONDIZIONATORE D’ARIA
PL KLIMATYZATOR
SV LUFTKONDITIONERING
NO KLIMAANLEGG
DA KLIMAANLÆG
FI ILMASTOINTILAITE
CZ
KLIMATIZAČNÍ ZAŘÍZENÍ
EXP09HSECI
EXP11HSECI
USER MANUAL
MANUEL D’UTILISATION
MANUALE PER L’UTENTE
INSTRUKCJA OBSŁUGI
BRUKSANVISNINNG
BRUKSANVISNING
BRUGSVEJLEDNING
YTTÖOHJE
NÁVOD K POUŽITÍ
2
24
46
68
90
112
134
156
178
2 www.electrolux.com
WE’RE THINKING OF YOU
CUSTOMER CARE AND SERVICE
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with
it decades of professional experience and innovation. Ingenious and stylish, it has been
designed with you in mind. So whenever you use it, you can be safe in the knowledge that
you’ll get great results every time.
Welcome to Electrolux.
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data
available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Subject to change without notice.
Warning / Caution-Safety information.
General information and tips.
Environmental information.
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Visit our website to:
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CONTENTS
1. SAFETY INFORMATION ������������������������������������������������������������������������������������� 3
2. SAFETY INSTRUCTION ������������������������������������������������������������������������������������� 6
3. UNIT DESCRIPTION ����������������������������������������������������������������������������������� 10
4. ACCESSORIES INCLUDED ��������������������������������������������������������������������� 10
5. INSTALLATION INSTRUCTIONS ��������������������������������������������������������������������� 11
6. AIR CONDITIONER FEATURES ��������������������������������������������������������������������� 13
7. OPERATING INSTRUCTIONS ��������������������������������������������������������������������� 14
8. CARE & CLEANING ������������������������������������������������������������������������������������������� 17
9. TROUBLE SHOOTING ����������������������������������������������������������������������������������� 17
10. ADDITIONAL INFORMATION ��������������������������������������������������������������������� 18
11. ENVIRONMENTAL CONCERNS ��������������������������������������������������������������������� 23
3ENGLISH
1. SAFETY INFORMATION
1.1 Important notes
WARNING!
•This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved�
•Children shall not play with the appliance�
•If the supply cord is damaged, it must bereplaced by
the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard�
CAUTION!
•Contact authorised service technician for repair or
maintenance of this unit�
•Contact the installer for installation of this unit�
•The air conditioner is not intended for use by young
children of inrmed persons without supervision�
•Young children should be supervised to ensure that they
do not play with the air conditioner
•There are local council rules regarding maximum
allowable noise levels emitted by air conditioners�
•If the power cord is to be replaced, replacement work
shall be performed by authorised personnel only
•Installation work must be performed in accordance with
the national wiring standards by authorised personnel
only(if applicable)� Incorrect connection can cause
overheating and re�
•Take care not to catch ngers on fan when adjusting
horizontal louvres�
This manual explains the proper use of your new air
conditioner� Please read this manual carefully before using the
product� This manual should be kept in a safe place for handy
reference�
1� Do not operate unit without the air lter
2� Do not operate unit near any heat source or open re�
3� Do not expose the unit to direct sunlight�
4 www.electrolux.com
4� Always store or move the unit in an upright position�
5� Do not cover the appliance when in operation or
immediately after use�
6� Always ensure that when the water pump drain hose
is tted that the hose is run to an effective drain point�
7� Always drain condensate before storing unit�
1.2 Point to Keep in Mind When Using Your Air Conditioner
CAUTION!
Warnings for use
CAUTION!
Warning for power supply cord
•This power plug must only be plugged into an
appropriate wall socket� Do not use in conjunction with
any extension cords�
•Push the power plug securely into the socket and make
sure it is not loose�
•Do not pull, deform� or modify the power supply cord,
or immerse it in water� Pulling or misuse of the power
supply cord can result in damage to the unit and cause
electrical shock�
•If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualied
•Do not modify any part of this product�
•Do not insert anything into any part of the unit�
•Ensure the power supply used has an appropriate
voltage rating� Only use a 220V - 240V, 50Hz, 10A
mains electricity supply� Use of a power supply with an
improper voltage rating can result in damage to the unit
an possibly re�
•Always use a circuit breaker or fuse with the proper amp
rating� Do not, under any circumstances, use wire, pins
or other objects in place of a proper fuse�
•In the event of any abnormality with the air conditioner
(eg� a burning smell), turn it off immediately and
disconnect the power supply
5ENGLISH
1.3 Usage cautions
(only for UK)
•This appliance is equipped with a cord that has a earthed
wire connected to an earthed pin� The plug must be plugged
into a socket that is properly installed and earthed� Do not
under qny circumstances ccut or remove the square earthed
pin from this plug�
•Be sure to turn the unit off and disconnect the power supply
cord before performing any maintenance or cleaning�
•Do not splash or pour water directly onto the unit�Water can
cause electrical shock or equipment damage�
•Drainage should be performed whenever moving the air
conditioner (see page 14)� If any water remains in the tank, it
may spill out while being moved�
•To ensure proper drainage, the drainage hose must have
no kinks and must not be elevated during dehumidicatioin
mode� If not, the drained water may spill out into the room�
•The temperature around the drainage hose must not be
below freezing point when used� Drained water may freeze
inside the hose, causing water inside the unit to overow into
the room�
•Do not block the exhaust air outlet with obstacles� Cooling
Plug
Grounding tab
Plug
Square earthed pin
person in order to avoid a hazard� Use only the manufacturer
specied power cord for replacement�
•This appliance must be earthed� This appliance is equipped
with a cord having an earth wire� The plug must be plugged
into an outlet that is properly installed and earthed�
6 www.electrolux.com
performance may be reduced or stop completely
•Provide a residual current device (ROD) in order to protect
against electric shock in accordance with British Standard
and Wiring Rules�
•Exposure to direct airow for an extended period of time
could be hazardous to your health� Do not expose occupants,
pets, or plants to direct airow for extended periods of time�
•Do not use this air conditioner for non-specied special
purposes (e�g� preserving precision devices, food, pets,
plants, and art objects)� Usage in such a manner could harm
such property
2. SAFETY INSTRUCTION
2.1 Notes on Operation
• Allow 3 minutes for the compressor
to restart cooling� If you turn the air
conditioner off and immediately restart
it, allow 3 minutes for the compressor
to restart cooling� There is an electronic
device in the unit that keeps the
compressor turned off for 3 minutes for
safety
• In the event of a power failure during
use, allow 3 minutes before restarting
the unit� After power is reinstated,
restart the air conditioner� If the power
was off for less than three minutes,
be sure to wait at least three minutes
before restarting the unit� if you restart
the air conditioner within three minutes,
a protective device in the unit may
cause the compressor to shut off� This
protective device will prevent cooling for
about 5 minutes� Any previous setting
will be cancelled and the unit will return
to its initial setting�
• Low temperature operation: Is your
unit freezing up? Freezing may occur
when the unit is set close to 18°C in
low ambient temperature conditions,
especially at night� In these conditions, a
further temperature drop may cause the
unit to freeze� Setting the unit to a higher
temperature will prevent it from freezing�
• Dehumidication mode increases room
temperature� The unit generates heat
during dehumidication mode and the
room temperature will rise� Warm air will
be blown out from the exhaust air outlet,
but this is normal and does not indicate
a problem with the unit�
• This air conditioner blows the warm air
generated by the unit outside the room
via the exhaust hose while in cool mode�
In the mean time, the same amount
of air will enter the room from outside
through any openings of the room�
• Do not use means to accelerate the
defrosting process or to clean, other
than those recommended by the
manufacturer
• The appliance shall be stored in a room
without continuously operating ignition
sources (for example: open ames, an
operating gas appliance or an operating
electric heater)�
• Do not pierce or burn�
• Appliance should be installed, operated
and stored in a room with a oor area
larger than 12 m
2
• Compliance with national gas regulations
shall be observed�
• Keep ventilation openings clear of
obstruction�
7ENGLISH
2.2 Warning during usage
• The appliance shall be stored in a well-
ventilated area where the room size
larger than 12 m
2
• Any person who is involved with
working on or breaking into a refrigerant
circuit should hold a current valid
certicate from an industry-accredited
assessment authority, which authorises
their competence to handle refrigerants
safely in accordance with an industry
recognised assessment specication�
• Servicing shall only be performed
as recommended by the equipment
manufacturer� Maintenance and repair
requiring the assistance of other skilled
personnel shall be carried out under the
supervision of the person competent in
the use of ammable refrigerants�
• This product contains a lithium button/
coin cell battery� If a new or used lithium
button/coin cell battery is swallowed
or enters the body, it can cause severe
internal burns and can lead to death in
as little as 2 hours� Always completely
secure the battery compartment� If
the battery compartment does not
close securely, stop using the product,
remove the batteries, and keep it away
from children� If you think batteries might
have been swallowed or placed inside
any part of the body, seek immediate
medical attention�
To prevent injury to the user or other
people and property damage, the following
instructions must be followed�
Incorrect operation due to ignoring
instructions may cause harm or damage�
The seriousness is classied by the
following indications:
This symbol indicates the possibility
of death or serious injury
Warning during usage
This symbol indicates the possibility
of injury or damage to property
WARNING!
WARNING!
CAUTION!
Meanings of symbols used in this manual
are shown below:
This symbol indicates never to do
this�
This symbol indicates always do
this�
8 www.electrolux.com
warning meaning
Plug in power plug properly Otherwise, it may cause electric shock or
re due to excess heat generation
Do not operate or stop the unit by inserting
or pulling out Die power plug
It may cause electric shock or re due to
heat generation
Do not damage or use an unspecied
power cord
It may cause electric shook or re�
If the power cord is damaged, it must
be replaced by the manufacturer or an
authorised service centre or a similarly
qualied person in order to avoid a hazard
Do not modify power cord length or share
the outlet with other appliances
It may cause electric shock or re due to
heat generation
Do not operate with wet hands or in damp
environment
It may cause electric shock
Do not allow water to run into electric
parts
It may cause failure of unit or electric
shock
Always install circuit breaker and a
dedicated power circuit
Incorrect installation may cause Are and
electric shock
Unplug the unit if strange sounds, smell, or
smoke comes from it
It may cause re and electric shock
Do not use the socket if it is loose or
damaged
It may cause re and electric shock
Do not open the unit during operation It may cause re and electric shock
Keep rearms away It may cause re
Do not use the power cord close to
heating appliances
It may cause re and electric shock
Do not use the power cord near ammable
gas or combustibles, such as gasoline,
benzene, thinner, etc�
It may cause an explosion or re
Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance
It may cause explosion, re and burns
Do not disassemble or modify unit It may cause failure and electric shock
Always ensure effective earthing Incorrect earthing may cause electric
shock
Do not direct airow at room occupants This could harm your health
9ENGLISH
CAUTION!
caution meaning
When the air lter is to be removed, do not
touch the metal parts of the unit
It may cause an injury
Do not clean the air conditioner with water Water may enter the unit and degrade the
insulation� It may cause an electric shock
Ventilate the room well when used
together with a stove, etc�
An oxygen shortage may occur
When the unit is to be cleaned, switch off,
and turn off the circuit breaker
Do not clean unit when power is on as it
may cause re and electric shock, it may
cause an injury
Do not place a pet or house plant where it
will be exposed to direct air ow
This could injure the pet or plant
Do not use for special purposes Do not use this air conditioner to
preserve precision devices, food, pets,
plants, and art objects� It may cause
deterioration of quality, etc�
Stop operation and close the window in
storm or cyclone
Operation with windows opened may
cause wetting of indoor and soaking of
household furniture
Hold the plug by the head of the power
plug when taking it out
It may cause electric shock and damage
Turn off the main power switch when not
using the unit for a long time
It may cause failure of product or re
Do not place obstacles around air-inlets or
inside of air-outlet
It may cause failure of appliance or
accident
Always insert the lters securely� Clean
lter once every two weeks
Operation without lters may cause failure
Do not use strong detergent such as wax
or thinner - use a soft cloth
Appearance may be deteriorated due to
change of product colour or scratching of
its surface
Do not place heavy object on the power
cord and ensure that the cord is not
compressed
There is danger of re or electric shock
Do not drink water drained from air
conditioner
It contains contaminants and could make
you sick
Use caution when unpacking and installing Sharp edges could cause injury
If water enters the unit, turn the unit off
at the power outlet and switch off the
circuit breaker� Isolate supply by taking the
power-plug out and contact a qualied
service technician
It could cause electric shock and damage
10 www.electrolux.com
1
3
2
4
5
7
6
8
10
9
3. UNIT DESCRIPTION
• Check all the accessories are included in the package and please refer to the
installation instructions for their usage�
1
2
5
3
9
10
8
4
6
7
Room air discharge
Fig. 1
Fig. 2
Control panel
Remote control
Room air inlet
Drain outlet
Bottom tray drain outlet
Castor
Carrying handle(both sides)
Filter
Exhaust air outlet
4. ACCESSORIES INCLUDED
1
2
3
4
5
6
7
PARTS PARTS NAME: QUANTITY:
Exhaust hose
Window Sliding Kit
Drain Hose & Adaptor
3/8” Screw
Decoration lm
Fixing Strap
1 pcs
1 pcs
1 pcs
2 pcs
1 pcs
1 set
Remote Control 1 pcs
11ENGLISH
5. INSTALLATION INSTRUCTIONS
Fig. 3
5.1 Exhausting hot air
In the COOLING Mode the appliance must
be placed close to a window or opening
so that the warm exhaust air can be
ducted outside� First position unit on a at
oor and make sure there’s a minimum of
30cm clearance around the unit, and is
within the vicinity of a single circuit outlet
power source�
1. Extend either side of the hose (Fig� 3)�
3. Install the window kit on the window
and slide the adaptor B into the window
slider kit and seal� (Fig� 5 & 6)
2. Slide the adaptor A into the exchange
hole of the unit as shown on Fig� 4�
Fig. 4
Fig. 5
Fig. 6
Window Slider Kit
Minimum: 56cm
Maxmum: 112cm
Refer to " 5.2 Installation in a
casement window" about how to
install the window kit�
The hose can be extended from
its original length of 38cm up to
150cm, but it is the best to keep
the length to minimum required�
Also make sure that the hose does
not have any sharp bends or sags�
(Fig� 7)
Fig. 7
5.2 Installation in a casement
window
Fig. 9
B
1. Open the window sash and lift the
locking lever of the window slider kit (Fig�
9)
B: Locking lever
12 www.electrolux.com
C: Decoration lm
Fig. 10
Fig. 11 A
Fig. 11 B
Fig. 11 C
Fig. 12
Fig. 13
C
2. Place the window slider kit on the
window� Adjust the length of the window
slider kit according to the height of
window (Fig� 10)�
4. Cut the decoration lm to an appropriate
length and stick on the extend rod(Fig�
13)�
3. Press back the locking lever to x the
length of the window slider kit, then
close the window and pinch the window
kit between the window and the window
frame, to secure the window kit, peel off
the protect lm in the back of the tabs
of the anchor and attach on the window
frame, then fasten the strap(Fig� 12)�
The telescopic rod can be extended,
if the window is too high�
To do that, rst take out the
telescopic rod completely(Fig�11
A)� Then align the 3 hooks on the
extending rod(sold separately)
to the 3 slots on the end of the
telescopic rod and slide the 3
hooks into the slots, then press
down the extending rod to lock the
slots(Fig�11 B)� After that slide the
combined telescopic rod back into
the window kit(Fig�11C)�
13ENGLISH
Fig. 20
Fig. 21
1. Turn over the remote control� In the
button of the remote control there is a
slot�
2. Use a coin or something like that to
rotate the back cover anti-clockwise to
open it�(Fig�20 & 21)
3. Use the same way to open the
protecting cover inside and take out the
battery�(Fig�22)
6. AIR CONDITIONER FEATURES
6.1 CONTROL PANEL
6.2 Remote Control
1
234567
1 4
2
7
6
3
5
Displays temperature Increase temperature
Filter reset button (hold 3 secs to reset)
Turns unit on or off
Sets fan speed
Decrease temperature
Sets mode
Press to turn on or off unit
Press to select fan speeds
Press to increase temperature setting
Press to decrease temperature setting
Press to select modes
2
4
3
5
1
1
2
3
4
5
Open the back covers and remove
the protecting lm to activate the
remote control, when use for the
rst time�
To replace the battery
14 www.electrolux.com
7. OPERATING INSTRUCTIONS
Battery Type: RG15D/E-ELL (Rated
Voltage:3VDC)
WARNING!
Please use the battery
appropriately
4. Replace the battery and reinstall the
inside cover and back cover
Fig. 22
1.
Chemical Burn Hazard� Keep batteries
away from children�
2.
Be sure the batteries are inserted
properly
3.
Do not use batteries other than the
type specied�
4.
Do not use old batteries with new
ones �
5.
Do not dispose of batteries in re�
Batteries may explode or leak�
6.
The cells shall be disposed of
properly, including keeping them away
from children and even used cells may
cause injury
7.
To prevent damage, remove the
batteries when not being used for a
long time�
8.
This device complies with Part 15 of
the FCC Rules� Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation�
Some of the following instructions
can only be used by using the
Control Panel�
It is not necessary to use the
drainage hose in the "cool" mode�
Cooling mode
Fan mode
Heating mode (on some models)
In this mode the exhaust adaptor hose
MUST be used�
In this mode there is no need to use the
exhaust hose or drainage hose�
In this mode the exhaust adaptor hose
MUST be used�
7.1 Usage of the Control Panel
1. Press the "Modes" button until the
"Cool" indicator lights�
2. Press the " - " & " + " Temp buttons for
desired setting�
3. Press the "Fan speed" button for
desired fan speed�
1. Press the "Modes" button until the "Fan"
indicator is lit�
2. Press the "Fan speed" button to choose
the desired fan speed�
3. The fan will run at the selected speed
and the display will show the room
temperature�
1. Press the "Modes" button until the
"Heat" indicator is lit�
2. Press the " - " & " + " Temp buttons for
desired setting�
3. Press the "fan speed" button for desired
fan speed�
4. Connected drain hose� See 7�3
Drainage section�
15ENGLISH
After choosing the fan speed as
"Auto Fan", "High", "Mid" or "Low",
the corresponding fan speed
indicator light will illuminate�
Under Auto and Dry mode, you can
not select the fan speed�
Dry mode
Selecting fan speed
Check lter feature
Auto mode
Always have the exhaust hose attached in
this mode�
When you set the air conditioner in Auto
mode, it will automatically select cooling,
heating (inapplicable for cooling only
models), or fan only operation depending
on what temperature you have selected
and the room temperature� The air
conditioner will control room temperature
automatically round the temperature point
set by you�
Under AUTO mode, you can not select the
fan speed�
1� Press the "Modes" button until the
"Auto mode" indicator lights�
After the "Auto mode" is selected the unit
will run automatically according to the
actual room air temperature�
In this mode you do not need to use the
exhaust adaptor hose, BUT the water
collected must be discharged� See 7�3
Drainage Section�
If the display reads "A5" , the room
temperature sensor has failed� Contact
your Authorized Electrolux Service Centre�
If the display reads "E5" , the evaporator
temperature sensor has failed� Contact
your Authorized Electrolux Service Centre�
If the display reads "E7", the indoor
motor has failed� Contact your Authorized
Frigidaire Service Center
If the display reads "E4" , the display panel
communication has failed� Contact your
Authorized Electrolux Service Centre�
If the display reads "P1" , bottom tray
is full� Carefully move the unit to a drain
location, remove the bottom drain plug
and let the water drain away� Restart the
machine until the "P1" symbol disappears�
If error repeats, call for service�
You can select the desired fan speed, by
pressing the "Fan speed" button� The fan
speed will change in the sequence: "Auto
Fan", "High", "Mid", "Low"�
7.2 Fault code
1. Press the "Modes" button until the "Dry"
indicator is lit�
2. The fan will run at low speed and the
display will show the room temperature�
3. Keep doors & windows closed for best
effect�
4. Connected drain hose� See Drainage
section�
1. Cleaning the lter
2. Press and hold the "lter" button for 3
seconds to turn off the lter indicator
16 www.electrolux.com
Fig. 23
Fig. 24
Connect a 8-9mm hose here
to extend the draining hose
During the Heat and dry mode, you need
to connect the drain hose to the drain
outlet in the back of the unit to drain the
condensate from the unit� Otherwise, the
unit may not function normally and display
show “P1”�
A� Discharge into a drain that is lower than
the unit�
B� The unit have a pump to drain the
condensate�
During cooling mode, please replace the
rubber stopper to the hose connector to
reach the maximum performance�
If necessary you can extend the drain hose
by adapting the drain hose adpator in the
end of the drain hose, then use a 8-9mm
hose to extend�(Fig� 24)
Now that you have mastered the operating
procedure, here are more features in your
control that you should become familiar
with�
7.3 Drainage 7.4 Operation Tips
• The "Cool" circuit has an automatic 3
minutes time delayed start if the unit is
turned off and on quickly� This prevents
overheating of the compressor and
possible circuit breaker tripping� The fan
will continue to run during this time�
• Temperature can be set between 16 °C
and 32 °C�
• The control is capable of displaying
temperature in degrees Fahrenheit or
degrees Celsius� To convert from one to
the other and back, press and hold the
"TEMP" Up ( + ) and Down ( - ) buttons
together for 3 seconds�
• There is a 2-Second delay for the
compressor shutting down when
selecting Fan� This is to cover the
possibility of having to roll through to
select another mode�
• After a power outage, the unit will
memorize the last setting and return the
unit to the same setting once power is
restored�
• Indoor operating temperature range for
this product is 16 °C to 35 °C�
• During normal operation, the unit's
display will show room temperature
but when the room temperature is over
37°C the display will show "HI"�
• After 60 seconds of control inactivity the
display and indicator lights will turn off�
Press any button on the control panel
or remote control and the display will
resume�
17ENGLISH
8. CARE & CLEANING
Clean your air conditioner regularly to keep
it looking new
Be sure to unplug the unit before cleaning
to prevent shock or re hazards�
Enter the context of your task here
(optional)�
Be sure to unplug the air conditioner to
8.1 Air lter cleaning
8.2 Cabinet Cleaning
1. Grasp the lters tab and pull off the 4
lters on the back of the unit one by
one�
2. Wash the lter using liquid dishwashing
detergent and warm water� Rinse lter
thoroughly� Gently shake excess water
from the lter� Or, instead of washing
you may vacuum the lter clean�
3. Put back the lter after the lter is dry
Be sure lter is thoroughly dry
before replacing�
If you plan to store the appliance during
the winter, cover it with plastic or return it
to its carton box�
8.3 Winter Storage
• Never use harsh cleaners, wax or polish
on the cabinet front�
• Be sure to wring excess water from
the cloth before wiping around the
controls� Excess water in or around the
controls may cause damage to the air
conditioner
Caution when cleaning the unit�
prevent shock or re hazard�
The cabinet and front may be dusted with
an oil-free cloth or washed with a cloth
dampened in a solution of warm water and
mild liquid dishwashing detergent� Rinse
thoroughly and wipe dry
9. TROUBLE SHOOTING
Before calling for service, review this list� It
may save you time and expense� This list
includes common occurrences that are
not the result of defective workmanship or
materials in this appliance�
Air conditioner will not operate.
Air from unit does not feel cold
enough.
Air conditioner cooling, but room is
too warm - NO ice forming on cooling
coil behind decorative front.
• Wall plug disconnected� Push plug rmly
into wall outlet�
• House fuse blown or circuit breaker
tripped� Replace fuse with time delay
type or reset circuit breaker
• Control is OFF� Turn Control ON and set
to desired setting�
• P1 appears in the display window� Drain
water as described in 7�3 Drainage
Section �
• Room Temperature lower than the set
temperature (Cool Mode)� Reset the
temperature�
• Room temperature below 16 °C�
Cooling may not occur until room
temperature rises above 16 °C�
• Reset to a lower temperature�
• Compressor shut-off by changing
modes� Wait approximately 3 minutes
and listen for compressor to restart
when set in the COOL mode�
• Outdoor temperature below 16 °C� To
defrost the coil, set Fan mode�
• Air lter may be dirty� Clean lter� Refer
to 8� Care and Cleaning section� To
defrost, set to Fan mode�
• Temperature is set too low for nighttime
cooling� To defrost the coil, set to Fan
18 www.electrolux.com
• Dirty air lter - air restricted� Clean air
lter
• Outside temperature extremely hot� Set
FAN speed to a faster setting to bring air
through cooling coils more frequently
Room too cold.
• Set temperature too low� Increase set
temperature�
10. ADDITIONAL INFORMATION
Transport of equipment containing
ammable refrigerants
Disposal of equipment using
ammable refrigerants
Marking of equipment using signs
Storage of equipment/appliances
Storage of packed (unsold) equipment
Information on servicing
See transport regulations
See national regulations�
See local regulations
The storage of equipment should be
in accordance with the manufacturer’s
instructions�
Storage package protection should be
constructed such that mechanical damage
to the equipment inside the package will
not cause a leak of the refrigerant charge�
The maximum number of pieces of
equipment permitted to be stored together
will be determined by local regulations�
1. Checks to the area� Prior to beginning
work on systems containing ammable
refrigerants, safety checks are necessary
to ensure that the risk of ignition is
minimised� For repair to the refrigerating
system, the following precautions shall
be complied with prior to conducting
work on the system�
2. Work procedure� Work shall be
undertaken under a controlled
procedure so as to minimise the risk of a
ammable gas or vapour being present
while the work is being performed�
3. General work area� All maintenance
staff and others working in the local
area shall be instructed on the nature
of work being carried out� Work in
conned spaces shall be avoided� The
area around the workspace shall be
sectioned off� Ensure that the conditions
within the area have been made safe by
control of ammable material�
4. Checking for presence of refrigerant�
The area shall be checked with an
appropriate refrigerant detector prior
to and during work, to ensure the
technician is aware of potentially
ammable atmospheres� Ensure that
mode� Then, set temperature to a higher
setting�
• Exhaust duct not connected or blocked�
See 5�1 Exhausting hot air Section�
Air conditioner cooling, but room is
too warm - ice forming on cooling coil
behind decorative front
Air conditioner turns on and off
rapidly.
• Dirty air lter - air restricted� Clean air
lter� Refer to 8� Care and Cleaning
section�
• Temperature is set too high� Set
temperature to a lower setting�
• Air directional louvers positioned
improperly� Position louvers for better air
distribution�
• Front of unit is blocked by drapes,
blinds, furniture, etc� - restricts air
distribution� Clear blockage in front of
unit�
• Doors, windows, registers, etc� open -
cool air escapes� Close doors, windows,
registers, etc�
• Unit recently turned on in hot room�
Allow additional time to remove “stored
heat” from walls, ceiling, oor and
furniture�
19ENGLISH
the leak detection equipment being
used is suitable for use with ammable
refrigerants, i�e� nonsparking, adequately
sealed or intrinsically safe�
5. Presence of re extinguisher� If any
hot work is to be conducted on
the refrigeration equipment or any
associated parts, appropriate re
extinguishing equipment shall be
available to hand� Have a dry powder
or CO2 re extinguisher adjacent to the
charging area�
6. No ignition sources� No person carrying
out work in relation to a refrigeration
system which involves exposing
any pipe work that contains or has
contained ammable refrigerant shall
use any sources of ignition in such a
manner that it may lead to the risk of
re or explosion� All possible ignition
sources, including cigarette smoking,
should be kept sufciently far away
from the site of installation, repairing,
removing and disposal, during which
ammable refrigerant can possibly be
released to the surrounding space� Prior
to work taking place, the area around
the equipment is to be surveyed to
make sure that there are no ammable
hazards or ignition risks� “No Smoking”
signs shall be displayed�
7. Ventilated area� Ensure that the area
is in the open or that it is adequately
ventilated before breaking into the
system or conducting any hot work�
A degree of ventilation shall continue
during the period that the work is
carried out� The ventilation should safely
disperse any released refrigerant and
preferably expel it externally into the
atmosphere�
8. Checks to the refrigeration equipment�
Where electrical components are
being changed, they shall be t for the
purpose and to the correct specication�
At all times the manufacturer’s
maintenance and service guidelines
shall be followed� If in doubt consult the
manufacturer’s technical department
for assistance� The following checks
shall be applied to installations using
ammable refrigerants:
– The charge size is in accordance
with the room size within which the
refrigerant containing parts are installed;
– The ventilation machinery and outlets
are operating adequately and are not
obstructed;
– If an indirect refrigerating circuit is being
used, the secondary circuit shall be
checked for the presence of refrigerant;
– Marking to the equipment continues
to be visible and legible� Markings and
signs that are illegible shall be corrected;
– Refrigeration pipe or components are
installed in a position where theyare
unlikely to be exposed to any substance
which may corrode refrigerant containing
components, unless the components
are constructed of materials which are
inherently resistant to being corroded or
are suitably protected against being so
corroded�
9. Checks to electrical devices� Repair and
maintenance to electrical components
shall include initial safety checks and
component inspection procedures� If
a fault exists that could compromise
safety, then no electrical supply shall
be connected to the circuit until it is
satisfactorily dealt with� If the fault
cannot be corrected immediately but
it is necessary to continue operation,
an adequate temporary solution shall
be used� This shall be reported to the
owner of the equipment so all parties
are advised�
Initial safety checks shall include:
• That capacitors are discharged: this
shall be done in a safe manner to avoid
possibility of sparking;
• That there no live electrical components
and wiring are exposed while charging,
recovering or purging the system;
• That there is continuity of earth bonding�
Repairs to sealed components
1. During repairs to sealed components, all
electrical supplies shall be disconnected
from the equipment being worked upon
prior to any removal of sealed covers,
etc� If it is absolutely necessary to have
an electrical supply to equipment during
20 www.electrolux.com
Repair to intrinsically safe
components
NOTE: The use of silicon sealant may
inhibit the effectiveness of some types of
leak detection equipment� Intrinsically safe
components do not have to be isolated
prior to working on them�
Do not apply any permanent inductive or
capacitance loads to the circuit without
ensuring that this will not exceed the
permissible voltage and current permitted
for the equipment in use�
Intrinsically safe components are the only
types that can be worked on while live in
the presence of a ammable atmosphere�
The test apparatus shall be at the correct
rating� Replace components only with
parts specied by the manufacturer� Other
parts may result in the ignition of refrigerant
in the atmosphere from a leak�
Check that cabling will not be subject
to wear, corrosion, excessive pressure,
vibration, sharp edges or any other
adverse environmental effects� The check
shall also take into account the effects of
aging or continual vibration from sources
such as compressors or fans�
When breaking into the refrigerant circuit
to make repairs – or for any other purpose
– conventional procedures shall be
used� However, it is important that best
practice is followed since ammability is
a consideration� The following procedure
shall be adhered to:
• Remove refrigerant;
• Purge the circuit with inert gas;
• Evacuate;
Under no circumstances shall potential
sources of ignition be used in the
searching for or detection of refrigerant
leaks� A halide torch (or any other detector
using a naked ame) shall not be used�
The following leak detection methods are
deemed acceptable for systems containing
ammable refrigerants�
Electronic leak detectors shall be used
to detect ammable refrigerants, but the
sensitivity may not be adequate, or may
need re-calibration� (Detection equipment
shall be calibrated in a refrigerant-free
area�) Ensure that the detector is not a
potential source of ignition and is suitable
for the refrigerant used� Leak detection
equipment shall be set at a percentage
of the LFL of the refrigerant and shall be
calibrated to the refrigerant employed and
the appropriate percentage of gas (25 %
maximum) is conrmed�
Leak detection uids are suitable for use
with most refrigerants but the use of
detergents containing chlorine shall be
avoided as the chlorine may react with the
refrigerant and corrode the copper pipe-
work�
If a leak is suspected, all naked ames
shall be removed/ extinguished�
If a leakage of refrigerant is found which
requires brazing, all of the refrigerant shall
be recovered from the system, or isolated
(by means of shut off valves) in a part of
the system remote from the leak� Oxygen
free nitrogen (OFN) shall then be purged
through the system both before and during
the brazing process�
Cabling
Removal and evacuation
Detection of ammable refrigerants
Leak detection methods
servicing, then a permanently operating
form of leak detection shall be located
at the most critical point to warn of a
potentially hazardous situation�
2. Particular attention shall be paid to the
following to ensure that by working on
electrical components, the casing is not
altered in such a way that the level of
protection is affected� This shall include
damage to cables, excessive number
of connections, terminals not made to
original specication, damage to seals,
incorrect tting of glands, etc� Ensure
that apparatus is mounted securely
Ensure that seals or sealing materials
have not degraded such that they no
longer serve the purpose of preventing
the ingress of ammable atmospheres�
Replacement parts shall be in
accordance with the manufacturer’s
specications�
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192
  • Page 193 193
  • Page 194 194
  • Page 195 195
  • Page 196 196
  • Page 197 197
  • Page 198 198
  • Page 199 199
  • Page 200 200

Electrolux EXP11HSECI Instrukcja obsługi

Typ
Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla