Vestfrost VR-FF375-2H0I Instrukcja obsługi

Larder

Operation manual

Chłodziarka

Instrukcja obsługi

Chladnička

Návod k obsluze

Chladnička

Návod na obsluhu

VR-FF375-2H0I

VR-FF375-2H0H

VR-FF375-2H0P

VR-FF375-2H0D

EN-1

EN

Index

BEFORE USING YOUR FRIDGE ............................................................ 2

General warnings ............................................................................................. 2

Old and out-of-order fridges ............................................................................. 4

Installing and Operating your Fridge ............................................................ 5

Before using your Fridge .................................................................................. 5

Information on No-Frost Technology ................................................................ 6

USAGE INFORMATION ........................................................................... 7

Operating your Fridge ...................................................................................... 7

Fridge Department Temperature Adjustment............................................................. 8

Super Cooling Mode .................................................................................................. 8

Economy mode ......................................................................................................... 9

Function of Child lock ............................................................................................... 9

Screen saver mode .................................................................................................. 10

Drink cool mode ....................................................................................................... 10

Mute Mode ............................................................................................................... 11

Warnings about Temperature Adjustments ...................................................... 11

Accessories ..................................................................................................... 12

Chiller shelf ............................................................................................................... 12

Fresh dial ................................................................................................................. 12

FOOD STORAGE ................................................................................... 13

CLEANING AND MAINTENANCE ......................................................... 14

SHIPMENT AND REPOSITIONING ........................................................ 14

Repositioning the door .................................................................................... 15

BEFORE CALLING SERVICE ................................................................ 15

Tips for saving energy ..................................................................................... 18

THE PARTS OF THE APPLIANCE AND THE COMPARTMENTS ........ 19

TECHNICAL DATA ................................................................................. 21

INFORMATION FOR TEST INSTITUTES ............................................... 21

CUSTOMER CARE AND SERVICE ....................................................... 21

Symbol ISO 7010 W021

Warning; Risk of re / ammable materials

EN-2

EN

BEFORE USING YOUR FRIDGE

General warnings

WARNING: Keep vantilation openings, in the appliance

enclosure or in the built-in structure, clear of obstruction.

WARNING: Do not use mechanical devices or other means

to accelerate the defrosting process, other than those

recommended by the manufacturer.

WARNING: Do not use electrical appliances inside the food

storage compartments of the appliance, unless they are of

the type recommended by the manufacturer.

WARNING: Do not damage the refrigerant circuit.

WARNING: When positioning the appliance, ensure the supply

cord is not trapped or damaged.

WARNING: Do not locate multiple portable socket-outlets or

portable power supplies at the rear of the appliance.

WARNING: In order to avoid any hazards resulting from the

instability of the appliance, it must be xed in accordance

with the following instructions:

If your appliance uses R600a as a refrigerant (this

information will be provided on the label of the cooler) you

should take care during transportation and installation to prevent

the cooler elements from being damaged. R600a is an

environmentally friendly and natural gas, but it is explosive. In

the event of a leak due to damage of the cooler elements, move

your fridge away from open ames or heat sources and ventilate

the room where the appliance is located for a few minutes.

• While carrying and positioning the fridge, do not damage the

cooler gas circuit.

• Do not store explosive substances such as aerosol cans with

a ammable propellant in this appliance.

EN-3

EN

• This appliance is intended to be used in household and

domestic applications

• If the socket does not match the refrigerator plug, it must be

replaced by the manufacturer, a service agent or similarly

qualied persons in order to avoid a hazard.

• A specially grounded plug has been connected to the power

cable of your appliance. This plug should be used with

a specially grounded socket of 16 amperes. If there is no

such socket in your house, please have one installed by an

authorised electrician.

• This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children without

supervision.

• If the supply cord is damaged, it must be replaced by the

manufacturer, an authorised service agent or similar qualied

persons, in order to avoid a haz ard.

• This appliance is not intended for use at altitudes exceeding

2000 m.

EN-4

EN

Old and out-of-order fridges

• If your old fridge has a lock, break or remove the lock before discarding it, because

children may get trapped inside it and may cause an accident.

• Old fridges and freezers contain isolation material and refrigerant with CFC. Therefore,

take care not to harm environment when you are discarding your old fridges.

Please ask your municipal authority about the disposal of the WEEE for

the reuse, recycle and recovery purposes.

Notes:

• Please read the instruction manual carefully before installing and using your appliance.

We are not responsible for the damage occurred due to misuse.

• Follow all instructions on your appliance and instruction manual, and keep this manual

in a safe place to resolve the problems that may occur in the future.

• This appliance is produced to be used in homes and it can only be used in domestic

environments and for the specied purposes. It is not suitable for commercial or

common use. Such use will cause the guarantee of the appliance to be cancelled and

our company will not be responsible for the losses to be occurred.

• This appliance is produced to be used in houses and it is only suitable for cooling / storing

foods. It is not suitable for commercial or common use and/or for storing substances

except for food. Our company is not responsible for the losses to be occurred in the

contrary case.

Safety warnings

• Do not use multiple receptacles or extension cord.

• Do not plug in damaged, torn or old plugs.

• Do not pull, bend or damage the cord.

• This appliance is designed for use by adults, do not allow children to

play with the appliance or let them hang off the door.

• Do not plug-in or out the plug from the receptacle with wet hands to

prevent electrocution!

• Do not place explosive or ammable material in your fridge for your

safety. Place drinks with higher alcohol amount vertically and by

closing their necks tightly in the fridge.

• Do not cover the body or top of fridge with lace. This affects the

performance of your fridge.

• Fix the accessories in the fridge during transportation to prevent damage

to accessories.

EN-5

EN

Installing and Operating your Fridge

Before starting to use your fridge, you should pay attention to the following points:

• Operating voltage for your fridge is 220-240 V at 50Hz.

• Do not use plug adapter.

• We do not take the responsibility of the damages that occur due to ungrounded usage.

• Place your fridge in a place that it would not be exposed to direct sunlight.

• Your appliance should be at least 50 cm away from stoves, ovens and heater cores, and

should be at least 5 cm away from electrical ovens.

• It should never be used outdoors or left under the rain.

• When your fridge is placed next to a deep freezer, there should be at least

2 cm between them to prevent humidity on the outer surface.

• Do not place anything on your fridge, and install your fridge in a suitable

place so that at least 15 cm is available on the upper side.

• If you will place your fridge next to your kitchen cabinets, leave a space

of 2 cm between them.

• Fit the plastic wall spacers to the condenser at the back of the refrigerator

in order to prevent leaning to the wall for good performance.

• Install the distance adjustment plastic (the part with black vanes at the

rear) by turning it 90° to prevent the condenser from touching the wall.

• Refrigerator should be placed against a wall with a free distance not

exceeding 75 mm.

• The adjustable front legs should stabilized in an appropriate height to allow your fridge

operate in a stable and proper way. You can adjust the legs by turning them clockwise

(or in the opposite direction). This should be done before placing food in the fridge.

• Before using your fridge, wipe all parts with warm water added with a tea spoonful

of sodium bicarbonate, and then rinse with clean water and dry. Place all parts after

cleaning.

Before Using your Fridge

• When it is operated for the rst time or after transportation, keep

your fridge in the upright position for 3 hours and plug it on to allow

efcient operation. Otherwise, you may damage the compressor.

• Your fridge may have a smell when it is operated for the rst time; the smell will fade

away when your fridge starts to cool.

EN-6

EN

Information on No-Frost Technology

No-frost refrigerators differ from other static refrigerators in their

operating principle.

In normal refrigerators the humidity entering the refrigerators due

to opening the door and the humidity inherent in the food causes

freezing in the backside of air duct. To defrost the frost and ice

in the backside of air duct, you are periodically required to turn

off the refrigerator, place the food that needs to be kept cooled in

a separately cooled. The situation is completely different in no-

frost refrigerators. Dry and cold air is blown into the refrigerator

compartment homogeneously and evenly from several points

via a blower fan. Cold air dispersed homogeneously and evenly

between the shelves cools all of your food equally and uniformly,

thus preventing humidity and freezing. Therefore your no-frost

refrigerators allows you ease of use, in addition to its huge capacity

and stylish appearance.

EN-7

EN

USAGE INFORMATION

Operating your Fridge

18 7 6a 512 3

2911 4

106b

1. Fridge set button (CS)

2. Mode button (M)

3. Drink cool button

4. Mute button

5. Fridge set value screen

6a / 6b. Super cool symbol

7. Economy mode symbol

8. Low voltage symbol

9. Child lock symbol

10. Alarm (SR) symbol

11. Sound Off symbol

12. Drink cool value screen (Active symbol may change according to language (Min-Dk.))

EN-8

EN

Fridge Department Temperature Adjustment

• Initial temperature value for fridge Indicator is 5oC.

• Press fridge set button.

• The set value for fridge indicator starts to ash when you press this button.

• The value for fridge indicator changes for a lower temperature each time you press this

button when the indicator is ashing. (8oC, 7oC, 6oC, 5oC, 4oC, 3oC, 2oC)

• When you wait for 5 seconds without pressing any button after reaching the desired set

value, the set value is activated and your fridge operates with that set value.

• When you press set button until the value for fridge Indicator reaches 2oC (maximum

cold position), if you press the button again, display values start again from 8oC.

Recommended Temperature Values for the fridge

When would it be adjusted? Inner Temperature

For minimum cooling capacity 7oC, 8oC

In normal usage 4oC, 5oC, 6oC

For maximum cooling capacity. 2oC, 3oC

Super Cooling Mode

• To cool plenty of food

• To cool foods rapidly

How to use;

• Press the mode button until Super Cooling mode selected.

• While Super Cooling Mode Indicator is ashing if no button is clicked for 5 seconds then

a beep sound will be heard and the mode will be enabled.

• While the Super Cooling mode is active the letters “SC” will be seen at the Indicator of

the fridge.

Note: Super Cooling mode will be cancelled automatically after 5 hours or when the fridge

sensor temperature falls below 2°C.

EN-9

EN

Economy mode

Your fridge will consume minimum energy at 5°C set value which is the most optimum stor-

age condition.

When to use;

• When you want your appliance to operate economic ally.

How to use;

• Push “mode button” until a circle appears around economy symbol.

• If no pressed any button for 1 sec, mode will be set. Circle will blink 3 times. When mode

is set, buzzer will sound beep beep.

• While the Economy mode is active the letters “e” will be seen at the indicator in the

fridge.

Function of Child lock

When would it be used?

To prevent children from playing with the buttons and changing the settings you have made,

child lock is available in the appliance.

Activating Child Lock

Press Drink Cool and Mode buttons simultaneously for 5 seconds.

Deactivating Child Lock

Press Drink Cool and Mode buttons simultaneously for 5 seconds.

Note:

Child lock will also be deactivated if electricity is interrupted or the fridge is unplugged.

EN-10

EN

Screen saver mode

How to use?

This mode will be activated when you press Mute button for 5 seconds.

If pressed no button in 5 seconds when he mode is active, lights of the control panel will go

off.

If you press any button when lights of control panel are off, the current settings will appear on

the screen, and then you can maket he adjustment as you want. If you neither cancel screen

saver mode nor press any button in 5 seconds, the control panel will go off again.

To cancel screen saver mode press Mute button for 5 seconds again.

When screen saver mode is active you can also activate child lock.

If you do not press any button for 5 seconds after activating child lock, the lights of the control

panel will go off. Then, you can view the previous settings and that child lock symbol is active

when you pres any button, and you can cancel child lock as is described in the instruction

of that mode.

Drink cool mode

Drink cool button should be pressed to activate beverage cooling mode. Each press will

increment the time for 5 minutes up to 30 minutes, and then it returns to "0". You can view

the time zone you want to set on “Drink cool alarm counter” section. Drink cool mode only

lets the refrigerator release an audible alert after a specic period.

Important: It should not be confused with cooling.

Note: You must adjust the time according to the temperature of the bottles before you put

them in.

For example, you can set the time as “5 minutes” in the beginning. After this time, if the

cooling is insufcient, you might set another 5 or 10 minutes.

This mode may be used as simple timer in Fridge models

EN-11

EN

Warnings about Temperature Adjustments

• Do not pass to another adjustment before completing an adjustment

• Temperature adjustments should be made according to the frequency of door open-

ings, the quantity of food kept inside the fridge and ambient temperature of the place

of your fridge.

• Your fridge should be operated up to 24 hours according to the ambient temperature

without interruption after being plugged in to be completely cooled.

• Do not open doors of your fridge frequently and do not place much food inside it in this

period.

• A 5 minute delaying function is applied to prevent damage to the compressor of your

fridge, when you take the plug off and then plug it on again to operate it or when an

energy breakdown occurs. Your fridge will start to operate normally after 5 minutes.

• Your fridge is designed to operate in the ambient temperature intervals stated in the

standards, according to the climate class stated in the information label. We do not

recommend operating your fridge out of stated temperatures value limits in terms of

cooling effectiveness.

• This appliance is designed for use at an ambient temperature within the 10°C - 43°C

range.

Climate class and meaning:

T (tropical): This refrigerating appliance is intended to be used at ambient temperatures

ranging from 16 °C to 43 °C.

ST (subtropical): This refrigerating appliance is intended to be used at ambient

temperatures ranging from 16 °C to 38 °C.

N (temperate): This refrigerating appliance is intended to be used at ambient temperatures

ranging from 16 °C to 32 °C.

SN (extended temperate): This refrigerating appliance is intended to be used at ambient

temperatures ranging from 10 °C to 32 °C.

Mute Mode

This mode will be activated when you press Mute button. When this mode is activeted all

button sounds and sound alarms will be off.

This mode can be canceled by pressing mute button.

EN-12

EN

If turbo fan is available on your product ;

Do not block air inlet and outlet openings when storing

food, otherwise air circulation that provided by turbo fan

will be impaired.

Fresh dial

When the humidity controler in the closed position, it

allows fresh fruit and vegetables to be stored longer.

In case of the crisper is totally full, the fresh dial is located

in front of crisper, should be opened. By means of this

the air in the crisper and humidity rate will be controlled

and endurance life will be increased.

If you see any condensation on glass shelf, humidity

control should be taken into the open positions.

Chiller shelf

Keeping food in the Chiller compartment instead of the freezer

or refrigerator compartment allows food retain freshness and

avour longer, while preserving its fresh appearance. When

chiller tray becomes dirty, remove it and wash it with water.

(Water freezes at 0°C, but foods containing salt or sugar freeze

at temperature lower than that)

Normally people use the chiller compartment for raw sh, lightly

pickled, rice, etc...

!Do not put foods you want to freeze or ice trays in order to make ice.

Removing the Chiller shelf

• Pull the chiller shelf out toward you by sliding on rails.

• Pull the chiller shelf up from rail to remove.

Accessories

Visual and text descriptions on the accessories section may vary

according to the model of your appliance.

(In some models)

EN-13

EN

FOOD STORAGE

• To reduce humidity and avoid the consequent formation of frost, always store liquids in

sealed containers in the refrigerator. Frost tends to concentrate in the coldest parts of

the evaporating liquid and, in time, your appliance will require more frequent defrosting.

• Never place warm food in the refrigerator. Warm food should be allowed to cool at

room temperature and should be arranged to ensure adequate air circulation in the

refrigerator compartment.

• Make sure no items are in direct contact with the rear wall of the appliance as frost will

develop and packaging will stick to it. Do not open the refrigerator door frequently.

• We recommend that meat and clean sh are loosely wrapped and stored on the glass

shelf just above the vegetable bin where the air is cooler, as this provides the best

storage conditions.

• Store loose fruit and vegetable items in the crisper containers.

• Store loose fruit and vegetables in the crisper.

• Storing fruit and vegetables separately helps prevent ethylene-sensitive vegetables

(green leaves, broccoli, carrot, etc.) being affected by ethylene-releaser fruits (banana,

peach, apricot, g etc.).

• Do not put wet vegetables into the refrigerator.

• Storage time for all food products depends on the initial quality of the food and an

uninterrupted refrigeration cycle before refrigerator storage.

• To avoid cross-contamination do not store meat products with fruit and vegetables.

Water leaking from meat may contaminate other products in the refrigerator. You should

package meat products and clean any leakages on the shelves.

• Do not put food in front of the air ow passage.

• Consume packaged foods before the recommended expiry date.

NOTE: Potatoes, onions and garlic should not be stored in the refrigerator.

• For normal working conditions, it will be sufcient to adjust the temperature setting

of your refrigerator to +4 °C.

• The temperature of the fridge compartment should be in the range of 0-8 °C, fresh foods

below 0 °C are iced and rotted, bacterial load increases above 8 °C, and spoils.

• Do not put hot food in the refrigerator immediately, wait for the temperature to pass

outside. Hot foods increase the degree of your refrigerator and cause food poisoning

and unnecessary spoiling of the food.

• Meat, sh, etc. should be store in the chiller compartment of the food, and the vegetable

compartment is preferred for vegetables. (if available)

• To prevent cross contamination, meat products and fruit vegetables are not stored

together.

• Foods should be placed in the refrigerator in closed containers or covered to prevent

moisture and odors.

EN-14

EN

CLEANING AND MAINTENANCE

• Disconnect unit from the power supply before cleaning.

• Do not clean the appliance by pouring water.

• The refrigerator should be cleaned periodically using a solution of

bicarbonate of soda and lukewarm water

• Clean the accessories separately with soap and

water. Do not clean them in the washing machine.

• Do not use abrasive products, detergents or soaps. After washing,

rinse with clean water and dry carefully. When the cleaning

operations have been completed reconnect the plug of the unit

with dry hands.

• You should clean the condenser (back of the appliance)

with broom ones a year in order to provide energy saving

and increase the productivity.

THE POWER SUPPLY MUST BE DISCONNECTED.

Replacing LED Lighting

If your fridge has LED lighting contact the help desk as this should be changed by authorized

personnel only.

SHIPMENT AND REPOSITIONING

• Original package and foam may be kept for re-transportation (optionally).

• You should fasten your fridge with thick package, bands or strong cords and follow the

instructions for transportation on the package for re-transportation.

• Remove movable parts (shelves, accessories, veg-

etable bins etc.) or x them into the fridge against

shocks using bands during re-positioning and trans-

portation.

Carry your fridge in the upright position.

EN-15

EN

Repositioning the door

• It is not possible to change the opening direction of your fridge door, if the door handles

on your fridge are installed from the front surface of the door.

• It is possible to change the opening direction of the door on models without any handles.

• If the door opening direction of your fridge may be changed, you should contact the

nearest Authorized Service to have the opening direction changed.

BEFORE CALLING SERVICE

Errors

If you are experiencing problems with your refrigerator, please check the following before

contacting the after-sales service.

ERROR TYPE MEANING WHY WHAT TO DO

E01 Sensor warning Call Service for assistance as

soon as possible.

E02 Sensor warning Call Service for assistance as

soon as possible.

E03 Sensor warning Call Service for assistance as

soon as possible.

E06 Sensor warning Call Service for assistance as

soon as possible.

E07 Sensor warning Call Service for assistance as

soon as possible.

E08 Low Voltage Warning

Power supply to the device

has dropped to below

170 V.

- This is not a device failure, this

error helps to prevent damages

to the compressor.

- The voltage needs to be

increased back to required

levels

If this warning continues an

authorised technician needs to be

contacted.

E10 Fridge compartment is

not cold enough

Likely to occur after:

- Long term power failure.

- Hot food has been left in

the fridge.

1. Set the fridge temperature to

a colder value or set Super

Cool. This should remove the

error code once the required

temperature has been reached.

Keep doors closed to improve

time taken to reach the correct

temperature.

2. Please empty the location

at the front area of air duct

channel holes and avoid

putting food close to the

sensor.

If this warning continues an

authorised technician needs to be

contacted.

EN-16

EN

If your fridge is not operating ;

• Is there any electrical faults?

• Is the plug is placed properly in the receptacle?

• Is the fuse of the receptacle that the plug is plugged or the main fuse blown?

• Is there any fault in the socket? Examine this by plugging your fridge into a receptacle

which you are sure that is working.

ERROR TYPE MEANING WHY WHAT TO DO

E11 Fridge compartment is

too cold Various

1. Check is Super Cool mode is

activated

2. Reduce the fridge

compartment temperature

3. Check to see if vents are clear

and not clogged

If this warning continues an

authorised technician needs to be

contacted.

If your fridge is not working properly, it may be a minor problem, therefore check the following,

before calling an electrician to save time and money.

What to do if your appliance does not operate;

Check that;

• There is no power,

• The general switch in your home is disconnected ,

• The socket is not sufcient. To check this, plug in another appliance that you know which

is working into the same socket.

What to do if your appliance performs poorly;

Check that;

• You have not overloaded the appliance ,

• The fridge temperature set to 2.

• The door is closed perfectly ,

• There is no dust on the condenser ,

• There is enough place at the rear and side walls.

If your fridge is operating too loudly;

Normal Noises

Cracking (Ice cracking) Noise:

• During automatic defrosting.

• When the appliance is cooled or warmed (due to expansion of appliance material).

Short cracking: Heard when the thermostat switches the compressor on/off.

Compressor noise: Normal motor noise. This noise means that the compressor operates

normally Compressor may cause more noise for a short time when it is activated.

Bubbling noise and splash: This noise is caused by the

ow of the refrigerant in the tubes of the system.

EN-17

EN

Water ow noise: Normal ow noise of water owing to the evaporation

container during defrosting. This noise can be heard during defrosting.

Air Blow Noise: Normal fan noise. This noise can be heard in fridges

during normal operation of the system due to the circulation of air.

If the edges of fridge cabinet that the door joint contact are warm;

Especially in summer (hot weather), the surfaces that the joint contact may

get warmer during the operation of the compressor, this is normal.

If humidity builds up inside the fridge;

• Are all food packed properly? Are the containers dried before placing them in the fridge?

• Is the fridge's door opened frequently? Humidity of the room gets in the fridge when the

door is opened. Humidity build up will be faster when you open the door more frequently,

especially if the humidity of the room is high.

If the door is not opened and closed properly;

• Do the food packages prevent closing of the door?

• Are the door compartments, shelves and drawers placed properly?

• Are door joints broken or torn?

• Is your fridge on a level surface?

Recommendations

To stop the appliance completely, unplug from main socket (for cleaning and when the door

is left open)

IMPORTANT NOTES:

• Compressor protection function will be activated after sudden power breakdowns or

after unplugging the appliance, because the gas in the cooling system is not stabilized

yet. Your appliance will start after 5 minutes, there is nothing to worry about.

• If you will not use your fridge for a long time (e.g. in summer holidays) unplug it. Clean

your fridge according to chapter “CLEANING AND MAINTENANCE” and leave the door

open to prevent humidity and smell.

• If the problem persists after you have followed all the instructions above, please consult

to the nearest Authorized service.

• The lifetime of your appliance stated and declared by the Department of the Industry is

10 years (the period for retaining parts required for the proper functioning of the appli-

ance).

EN-18

EN

Tips for saving energy

1. Install the appliance in a cool, well ventilated room , but not in direct sunlight and not near

heat source (radiator, cooker.. etc). Otherwise use an insulating plate.

2. Allow ward food and drinks to cool down outside the appliance.

3. When thawing frozen food, place it in the refrigerator compartment. The low temperature

of the frozen food will help to cool the refrigerator compartment when it is thawing. So it

causes energy saving. If the frozen food is put out, it causes wastage of energy.

4. When placing, drinks and slops they must be covered. Otherwise humidity increases at

the appliance. Therefore the working time gets longer. Also covering drinks and slops

helps to save smell and taste.

5. When placing food and drinks, open the appliance door as briey as possible.

6. Keep close the covers of any different temperature compartment in the appliance (crisper,

chiller ...etc ).

7. Door gasket must be clean and pliable. Replace gaskets if worn.

EN-19

EN

THE PARTS OF THE APPLIANCE AND THE COMPARTMENTS

This presentation is only for information about the parts of the appliance.

Parts may vary according to the appliance model.

1) Control panel

2) Turbo fan *

3) Wine rack / bottle shelf *

4) Fridge shelves

5) Top crisper / Chiller shelves *

6) Bottom crisper cover

7) Bottom crisper

8) Levelling feet

9) Bottle shelf

10) Door shelves

11) Egg holder * In some models

This appliance is not intended to be used as a built-in appliance.

Strona jest ładowana ...

Vestfrost VR-FF375-2H0I Instrukcja obsługi

Vestfrost VR-FF375-2H0I Instrukcja obsługi

w innych językach

Inne dokumenty