Whirlpool LLD 8M132 X EU instrukcja

Marka: Whirlpool

Model: LLD 8M132 X EU

Kategoria: Zmywarki

Typ: instrukcja

English, 1

LLD 8M132

Contents

Product Fiche, 2

Precautions and safety advice, 3-4

General safety

Disposal of old electrical appliances

Saving energy and respecting the environment

Recycling & Disposal Information

Assistance

Installation, 5-6

Positioning and levelling

Connecting the electricity and water supplies

Technical data

Switching the appliance on for the first time

Advice regarding the first wash cycle

Description of the appliance, 7

Overall view

Control panel

Loading the racks, 8-9

Lower rack

Upper rack

Cutlery basket

Adjusting the upper rack

Cutlery tray*

Unsuitable crockery

Damage to glass and crockery

Start-up and use, 10

Starting the dishwasher

Measuring out the detergent

Wash cycles, 11

Table of wash cycles

Special wash cycles and options, 12

Rinse aid and refined salt, 13

Measuring out the rinse aid

Measuring out the refined salt

Care and maintenance, 14

Cutting off the water and electricity supplies

Cleaning the dishwasher

Preventing unpleasant odours

Cleaning the sprayer arms

Cleaning the water inlet filter

Cleaning the filters

Leaving the machine unused for extended periods

Troubleshooting, 15

Instructions for use

DISHWASHER

Polski, 16 Česky, 31

Slovensky, 46

Product Fiche

Brand

HOTPOINT ARISTON

Model

LLD 8M132

Rated capacity in standard place settings (1)

Energy efciency class on a scale from A+++ (low consumption) to D (high consumption)

A+++

Energy consumption per year in kWh (2)

238.0

Energy consumption of the standard cleaning cycle in kWh

0.83

Power consumption of the off-mode in W

0.5

Power consumption of the left-on mode in W

5.0

Water consumption per year in litres (3)

2520.0

Drying efcacy class on a scale from G (low efcacy) to A (high efcacy)

Programme time for standard cleaning cycle in minutes

190’

The duration of the left-on mode in minutes

Noise in dB(A) Re 1pW

Built-in model

Yes

NOTES

1) The information on the label and che relates to the standard cleaning cycle, this programme is suitable to clean normally soiled

tableware and it is the most efcient programme in terms of combined energy and water consumption. The standard cleaning cycle

corresponds to the Eco cycle.

2) Based on 280 standard cleaning cycles using cold water ll and the consumption of the low power modes. Actual energy

consumption depends on how the appliance is used.

3) Based on 280 standard cleaning cycles. Actual water consumption depends on how the appliance is used.

Product Fiche

Precautions and advice

* Only available in selected models.

This appliance was designed and

manufactured in compliance with international

safety standards The following information has

been provided for safety reasons and should

therefore be read carefully.

Keep this instruction manual in a safe place for

future reference. If the appliance is sold, given

away or moved, please ensure the manual is kept

with the machine.

Please read these instructions carefully: they

contain important information on installation, use

and safety.

This appliance is designed for domestic use or

similar applications, for example:

- staff kitchen areas in shops, offices and other

work environments;

- farmhouses;

- use by guests in hotels, motels and other

residential settings;

- bed & breakfasts.

General safety

• This appliance should not be operated by

children younger than 8 years, people with

reduced physical, sensory or mental capacities,

or inexperienced people who are not familiar

with the product, unless they are given

supervision or instructions on how to use it

safely and are made aware of the dangers its

use might entail.

• Childrenmustnotplaywiththeappliance.Itis

the user’s responsibility to clean and maintain

theappliance.Childrenshouldnevercleanor

maintain it unless they are given supervision.

• The appliance was designed for domestic

use inside the home and is not intended for

commercial or industrial use.

• Theappliancemustbeusedbyadultsonlyto

wash domestic crockery in accordance with

the instructions in this manual.

• Theappliancemustnotbeinstalledoutdoors,

even in covered areas. It is extremely dangerous

to leave the machine exposed to rain and

storms.

• Donottouchtheappliancewhenbarefoot.

• Whenunpluggingtheappliancealwayspullthe

plugfromthemainssocket.Donotpullonthe

cable.

• Thewatersupplytapmustbeshutoffandthe

plug should be removed from the electrical

socket before cleaning or maintaining the

appliance.

• Iftheappliancebreaksdown,donotunderany

circumstances touch the internal parts in an

attempt to perform the repair work yourself.

• Do not lean or sit on the open door of the

appliance: this may cause the appliance to

overturn.

•Thedoorshouldnotbeleftopenasitmaycreate

a dangerous obstacle.

• Keepdetergentandrinseaidoutofreachof

children.

• Knives and other utensils with sharp edges

must be placed either in the cutlery basket with

the points facing downwards or horizontally in

the tip-up compartments on the upper rack.

Disposal

• Disposalofpackagingmaterial:observelocal

legislation so that the packaging may be

reused.

• The European Directive 2012/19/EU relating

toWasteElectricalandElectronicEquipment

(WEEE) states that household appliances

should not be disposed of using the normal

solidurbanwastecycle.Exhaustedappliances

should be collected separately in order to

optimise the re-using and recycling rate of the

materials inside the machine, while preventing

potential damage to the environment and public

health. The crossed-out dustbin symbol is

marked on all products to remind the owners

of their obligations regarding separated waste

collection.

For further information relating to the correct

disposal of household appliances, owners may

contact the relevant public authority or the local

appliance dealer.

Saving energy and respecting the

environment

Saving water and energy

• Onlybeginawashcyclewhenthedishwasher

isfull.Whilewaitingforthedishwashertobe

filled, prevent unpleasant odours using the Soak

cycle

(seeWashcycles)

• Selectawashcyclethatissuitedtothetype

of crockery and to the soil level of the crockery

using the Table of wash cycles:

 -fordisheswithanormalsoillevelusetheEco

washcycle, whichensures lowenergy/water

consumption levels.

- If the load is smaller than usual activate the

Half Load option*

(see Start-up and use).

• Ifyourelectricitysupplycontractgivesdetailsof

electricity-saving time bands, run wash cycles

whenelectricitypricesarelower.TheDelayed

Start button *

(see Start-up and use)

helps you

organise the wash cycles accordingly.

Phosphate-free and chlorine-free detergents

containing enzymes

• Westronglyrecommendthatyouusedetergents

that do not contain phosphates or chlorine, as

these products are harmful to the environment.

• Enzymesprovideaparticularlyeffectiveaction

at temperatures around 50°C. As a result

detergents containing enzymes can be used in

conjunction with low-temperature wash cycles

in order to achieve the same results as a normal

65°Cwashcycle.

•To avoidwasting detergent,use theproduct

in appropriate quantities based on the

manufacturer’s

recommendations, the hardness

of the water, the soil level and the quantity

of crockery to be washed. Even if they are

biodegradable, detergents contain substances

which may alter the balance of nature.

Assistance

Before contacting Assistance:

• Checkwhethertheproblemcanberesolvedusingthe

Troubleshooting guide

(see Troubleshooting).

• Restarttheprogrammetocheckwhethertheproblem

has ceased to exist.

• Ifthe problem persists, contact the Authorised

TechnicalAssistanceService.

Never use the services of unauthorised technicians.

Please have the following information to hand:

• Thetypeofmalfunction.

• Theappliancemodel(Mod.).

• Theserialnumber(S/N).

This information can be found on the appliance data plate

(seeDescriptionoftheappliance)

Installation

* Only available in selected models.

If the appliance must be moved at any time, keep it in an

upright position; if absolutely necessary, it may be tilted onto its

back.

Positioning and levelling

1.Remove the appliance from all packaging andcheck that

it has not been damaged during transportation. If it has been

damaged, contact the retailer and do not proceed any further

with the installation process.

2.Arrangethedishwashersothatitssidesorbackpanelarein

contact with the adjacent cabinets or the wall. This appliance

can also be recessed under a single worktop

(seetheAssembly

Instruction sheet.)

3. Position the dishwasher on a level sturdy floor. If the floor

is uneven, the front feet of the appliance should be adjusted

until it reaches a horizontal position. If the appliance is levelled

correctly, it will be more stable and much less likely to move or

cause vibrations and noise while it is operating.

*. To adjust the height of the rear foot, turn the red hexagonal

bushing on the lower central part at the front of the dishwasher

using a hexagonal spanner with an opening of 8 mm. Turn the

spanner in a clockwise direction to increase the height and in an

anticlockwise direction to decrease it

(see Building-in Instruction

sheet attached to the documentation.)

Connecting the water and electricity supplies

Connectiontothewaterandelectricitysuppliesshouldonly

beperformedbyaqualifiedtechnician.

The dishwasher should not stand on the water hoses or

electricity supply cable.

The appliance must be connected to the water supply

network using new hoses.

Donotuseoldpiping.

The water inlet and outlet hoses and the electricity supply cable

may be positioned towards the right or the left in order to achieve

the best possible installation.

Connecting the water inlet hose

• Toasuitablecoldwaterconnectionpoint:beforeattaching

the hose, run the water until it is perfectly clear so that any

impurities that may be present in the water do not clog the

appliance; after performing this operation, screw the inlet

hose tightly onto a tap with a ¾ gas threaded connection.

• Toasuitablehotwaterconnectionpoint:your dishwasher

may be supplied with hot water from the mains supply (if you

have a central heating system with radiators) provided that it

doesnotexceedatemperatureof60°C.

Screw the hose to the tap as described for connection to a

cold water supply.

If the inlet hose is not long enough, contact a specialist store

or an authorised technician

(seeAssistance.)

The water pressure must be within the values indicated in

theTechnicalDatatable

(see adjacent information.)

The hose should not be bent or compressed.

Connecting the water outlet hose

Connecttheoutlethose(withoutbendingit)toadrainductwith

a minimum diameter of 4 cm.

Theoutlethosemustbeataheightrangingfrom40to80cm

fromthefloor/surfacewherethedishwasherrests(A).

Before connecting the water outlet hose to the sink drain, remove

the plastic plug (B).

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the water supply

in the event of anomalies or leaks from inside the appliance.

Somemodelsarealsoequippedwiththesupplementarysafety

device New Acqua Stop

*, which guarantees anti-flooding

protection even in the event of a supply hose rupture.

WARNING: HAZARDOUS VOLTAGE!

Undernocircumstancesshouldthewaterinlethosebecut,as

it contains live electrical parts.

Electrical connection

Before inserting the plug into the electrical socket, make sure

that:

• Thesocketisearthedandcomplieswithcurrentregulations.

• thesocketcanwithstandthemaximumloadoftheappliance,

which is indicated on the data plate located on the inside of

the door

(seeDescriptionoftheappliance);

• Thepowersupplyvoltagefallswithinthevaluesindicatedon

the data plate on the inside of the door.

• Thesocketiscompatiblewiththeplugoftheappliance.If

this is not the case, ask an authorised technician to replace

the plug (

seeAssistance

); do not use extension cables or

multiple sockets.

Once the appliance has been installed, the power supply

cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be replaced

bythemanufactureroritsTechnicalAssistanceServiceinorder

to prevent all potential hazards

(seeAssistance.)

Switching the appliance on for the first time

Advice regarding the first wash cycle

Aftertheinstallation,removethestoppersfromtheracksandthe

retaining elastic elements from the upper rack, if any.

Immediately before the first washing, completely fill the salt

dispenserwithwaterandaddonlythenapproximately1kgofsalt

(seechapterentitledRinseaidandrefinedsalt).Thewatermay

overflow: this is normal and is not a cause for concern. Select

thewaterhardnessvalue(seechapterentitledRinseaidand

refinedsalt).-Afterthesalthasbeenpouredintothemachine,

theLOWSALTindicatorlight*switchesoff.

If the salt dispenser is not filled, the water softener and the

heating element may get damaged as a result.

Anti-condensation strip*

Afterinstallingthedishwasher,openthedoorandstickthe

adhesive transparent strip under the wooden shelf in order

to protect it from any condensation which may form.

Technical data

Dimensions

width 59.6 cm

height 82 cm

depth 57 cm

Capacity 14 standard place-settings

Water supply

pressure

0,05 ÷ 1MPa (0.5 ÷ 10 bar)

7,25 – 145 psi

Power supply

voltage

See appliance data plate

Total absorbed

power

See appliance data plate

Fuse See appliance data plate

This dishwasher conforms to the

following European Community

Directives:

-2006/95/EC (Low Voltage)

-2004/108/EC (Electromagnetic

Compatibility)

-2009/125/EC (Comm. Reg.

1016/2010) (Ecodesign)

-97/17/EC (Labelling)

-2012/19/EU Waste Electrical

and Electronic Equipment

(WEEE)

The control panel features a “Touch Control” system;

press the symbols lightly with your fingertips to activate the

command.

The symbols in the key to the wash cycles (to the left of the

control panel) DO NOT light up.

Wash cycles are selected by pressing the P symbol.

The machine has a buzzer/set of tones

(depending on the

dishwasher model

) to inform the user that a command has

been implemented: power on, cycle end etc.

The symbols/indicator lights/LEDs on the control panel/

display may vary in colour and may have a flashing or fixed

light

(depending on the dishwasher model)

The display provides useful information concerning the type

of wash cycle, drying/wash-cycle phase, remaining time,

temperature etc.

* Only available in selected models.

Overall view

Description of the

appliance

1. Upperrack

2. Uppersprayerarm

3. Tip-up dispensers

4. Rackheightadjuster

5. Lower rack

6. Lower sprayer arm

7. Washingfilter

8. Salt dispenser

9. Detergentandrinse-aiddispensersand

deviceActiveOxigen

10. Dataplate

11. Controlpanel

***

12. TurboDry*

*** Only in completely built-in models * Only available in selected models.

The number and type of wash cycles and options may vary depending on the dishwasher model.

Control panel

On-Off/Reset

Wash cycle select

Delayed Start option

Zone Wash option

Option

Multi-functional tablets (Tabs)

Extra Drying option

Short Time option

Start/Pause

Display

Key to wash cycle symbols

Display

Remaining time / ON / OFF /

END indicator light

Rinse-aid indicator light

Indicator light

Delayed start

Wash cycle number

Salt indicator light

Zone Wash indicator lights

Washing indicator light

Drying indicator light

Extra Drying indicator light

Short Time indicator light

Pause indicator light

Indicator light

Multi-functional tablets

Start indicator light

Loading the racks

Tips

Before loading the racks, remove all food residues from the

crockeryandemptyliquids fromglassesandcontainers.No

preventive rinsing is needed under running water.

Arrangethecrockerysothatitisheldinplacefirmlyanddoes

not tip over and arrange the containers with the openings facing

downwards and the concave/convex parts placed obliquely,

thus allowing the water to reach every surface and flow freely.

Makesurethatthelids,handles,traysandfryingpansdonot

prevent the sprayer arms from rotating. Place any small items

in the cutlery rack.

Since plastic dishes and non-stick frying pans usually retain more

water drops, their drying will be not so good as that of ceramic

or stainless-steel dishes.

Lightweight items such as plastic containers should be placed

in the upper rack and arranged so that they cannot move.

Afterloadingtheappliance,makesurethatthesprayerarms

can rotate freely.

Lower rack

The lower rack can hold pans, lids, dishes, salad bowls, cutlery

etc. Large plates and lids should be placed at the sides of the

rack.

Very soiled dishes and pans should be placed in the lower rack

because in this sector the water sprays are stronger and allow

a higher washing performance.

*Only available in selected models with different numbers and

positions.

Several dishwasher models are fitted with tip-up sectors*.

They can be used in a vertical position when arranging dishes

or in a horizontal position (lower) to load pans and salad bowls

easily.

Cutlery basket

Themodularbasketisequippedwithtopgrillesforimproved

cutlery arrangement. The basket must only be positioned at

the front of the lower rack.

Knives and other utensils with sharp edges must be placed

in the cutlery basket with the points facing downwards or they

must be positioned horizontally in the tip-up compartments on

the upper rack

Upper rack

Load this rack with delicate and lightweight crockery such as

glasses, cups, saucers and shallow salad bowls.

Several dishwasher models are fitted with tip-up sectors

They can be used in a vertical position when arranging tea/

dessert saucers or in a lower position to load bowls and food

containers.

Unsuitable crockery

• Woodencrockeryandcutlery.

• Delicatedecoratedglasses,artistichandicraftandantique

crockery. Their decorations are not resistant.

• Parts in synthetic material which do not withstand high

temperatures.

• Copperandtincrockery.

• Crockerysoiledwithash,wax,lubricatinggreaseorink.

Thecoloursofglassdecorationsandaluminium/silverpiecescan

change and fade during the washing process. Some types of

glass(e.g.crystalobjects)canbecomeopaqueafteranumber

of wash cycles too.

Damage to glass and crockery

Causedby:

•Typeofglassandglassproductionprocess.

•Chemicalcompositionofdetergent.

•Watertemperatureofrinsecycle.

Tips:

•Onlyuseglassesandporcelainguaranteedbythe

manufacturer as dishwasher safe.

•Useadelicatedetergentsuitableforcrockery.

•Collectglassesandcutleryfromthedishwasherassoonas

the wash cycle is over.

* Only available in selected models.

The upper rack can be adjusted for height based on

requirements:highpositiontoplacebulkycrockeryinthelower

rackandlowpositiontomakethemostofthetip-updispensers/

sectors by creating more space upwards.

Adjusting the height of the upper rack

In order to make it easier to arrange the crockery, the upper rack

may be moved to a higher or lower position.

The height of the upper rack should be adjusted WHEN THE

RACK IS EMPTY.

NEVER raise or lower the rack on one side only.

IftherackisequippedwithaLift-Up

device*

(see figure)

, lift

it up by holding its sides. To restore the lower position, press

the levers (A) at the sides of the rack and follow the rack down.

The upper rack cannot be used in the high position and

with the tip-up compartments closed in a vertical position.

Tip-up compartments with adjustable position

The side tip-up compartments can be positioned at three

different heights to optimize the arrangement of crockery inside

the rack.

Wineglassescanbeplacedsafelyinthetip-upcompartments

by inserting the stem of each glass into the corresponding slots.

Cutlery tray*

Some dishwasher models are fitted with a sliding tray which

can be used to hold serving utensils or small cups. For optimum

washing performance avoid positioning bulky crockery directly

below the tray. The cutlery tray can be removed

(see Figure).

Before loading the tray, make sure the supports are properly

coupled to the upper rack

(see Figure).

Start-up and use

Measuring out the detergent

A good wash result also depends on the correct amount of

detergent being used. Exceeding the stated amount does not

result in a more effective wash and increases environmental

pollution.

Based on how soiled the items are, the amount can be

adjusted to individual cases using powder or liquid detergent.

In the case of normally soiled items, use approximately either

35 gr (powder detergent) or 35 ml (liquid detergent). If tablets

are used, one tablet will be enough.

If the crockery is only lightly soiled or it has been rinsed

with water before being placed in the dishwasher, reduce

the amount of detergent considerably.

For good washing results also follow the instructions shown

on the detergent box.

For further questions please ask the detergent producers'

Advice Offices.

If the detergent dispenser is still closed, use the closing

device “A” to open it.

Introduce the detergent into the dry dispenser “B” only.

Place the amount of detergent for pre-washing directly

inside the tub.

1.WhenmeasuringoutthedetergentrefertotheTableofwash

cyclestoaddtheproperquantity.

Compartment B comprises a level showing the maximum

quantity of liquid or powder detergent that can be added to

each cycle.

2.Removedetergentresiduesfromtheedgesofthedispenser

and close the cover until it clicks.

3.Closethelidofthedetergentdispenserbypullingitupuntil

the closing device is secured in place.

The detergent dispenser automatically opens up at the right time

according to the wash cycle.

Ifall-in-onedetergentsareused,werecommendusingtheTABS

option, because it adjusts the cycle so that the best washing

and drying results are always achieved.

Only use detergent which has been specifically designed

for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam residue

remaining in the machine after the cycle has ended.

The use of tablets is only recommended for models which

offer the MULTI-FUNCTIONAL TABLETS option.

To achieve the best results from each washing and drying

cycle, powder detergent, rinse-aid liquid and salt should

be used.

* Only available in selected models.

Starting the dishwasher

1.Turnthewatertapon.

2.Press the ON-OFF symbol: the display lights up for a few

seconds and the text ON appears.

3. Open the door and pour in a suitable amount of detergent

(seeMeasuringoutthedetergent.)

4. Load the racks

(see Loading the racks)

and shut the door.

5. Press the P symbol to select the wash cycle based on the

type of crockery and its soil level

(see Table of wash cycles)

6. Select the wash options*

(see Special wash cycles and

options.)

7. Press Start/Pause; the Start indicator light on the display lights

up. The wash cycle number, the indicator lights corresponding

to washing, any selected options and the time remaining until

the end of the cycle appear on the display.

8. Once the wash cycle has ended, its corresponding number

appears on the display along with the text END. Switch off

the appliance using ON/OFF; the text OFF will appear on the

display. Shut off the water tap and unplug the appliance from

the electricity socket.

9.Waitafew minutesbeforeremovingthe crockerytoavoid

gettingburnt.Unloadtheracks,beginningwiththelowerlevel.

- The machine will temporarily switch off automatically

during certain extended periods of inactivity in order to

minimise electricity consumption.

AUTO WASH CYCLES*: this model of dishwasher is

equippedwithaspecialsensorwhichcanbeusedtoassess

the level of soiling and automatically select the most efficient

and economic wash cycle accordingly. The duration of the auto

wash cycles may vary due to the operation of the sensor.

If the crockery is only lightly soiled or has been rinsed

with water before being placed in the dishwasher, reduce

the amount of detergent used accordingly.

Changing a wash cycle in progress

If a mistake was made during the wash cycle selection process,

it is possible to change the cycle, provided that it has only just

begun. To change the wash cycle, switch off the machine by

pressing and holding down ON/OFF/Reset; the text 3-2-1 OFF

willappearonthedisplay.SwitchthemachinebackonusingON/

OFF; and select the wash cycle and any desired options again.

Adding extra crockery

Press Start/Pause: the Pause symbol lights up. Open the door,

taking care to avoid the escaping steam, and place the crockery

inside the appliance. Press Start/Pause again: the Start symbol

lights up and the cycle is resumed.

Press Start/Pause to pause the machine; the wash cycle is

stopped temporarily.

Atthisstagethewashcyclecannotbechanged.

Accidental interruptions

If the door is opened during the wash cycle or there is a power

cut, the cycle stops. It starts again from the point at which it

was interrupted once the door has been shut or the electricity

supply restored.

Wash cycles

The number and type of wash cycles and options may vary depending on the dishwasher model.

Instructions on wash-cycle selection and detergent dosage

1. TheECOwashcycleisthestandardcycletowhichtheenergylabeldatarefers.Itcanbeusedtowashcrockerywithanormal

soillevelandisthemostefficientcycleintermsofenergyandwaterconsumptionforthistypeofcrockery.29gr/ml+6gr/ml**

–1Tab

(**Quantity of pre-washing detergent)

2. Heavilysoileddishesandpans(nottobeusedfordelicateitems).35gr/ml–1Tab

3.Normallysoiledpansanddishes.29gr/ml+6gr/ml**–1Tab

4.Limitedquantityofdailysoiling(idealfor4placesettings)25gr/ml–1Tab

5.Washspreadoverthetworacks:delicateonupperrackandheavy-dutyforpansonlowerrack.35gr/ml–1Tab

6.Cyclefordelicateitems,whicharemoresensitivetohightemperatures35gr/ml–1Tab

7.Fastcycletobeusedforslightlydirtydishes(idealfor2placesettings)25gr/ml–1Tab

8.Pre-washwhileawaitingcompletionoftheloadwiththedishesfromthenextmeal.Nodetergent.

Standbyconsumption:Left-onmodeconsumption:5,0W-Offmodeconsumption:0.5W.

Wash-cycledataismeasuredunderlaboratoryconditionsaccordingtoEuropeanStandardEN50242.

Based on the different conditions of use, the wash-cycle duration and data can change.

Wash cycle

which

include

drying

Options

Approximate

duration of wash

cycles

Water

consumption

(l/cycle)

Energy

consumption

(KWh/cycle)

1. Eco Yes

Delayed start – Tabs –

Extra Dry

03:10’ 9,0 0,83

2. Auto Intensive Yes

Delayed start – Tabs –

Extra Dry – Zone wash –

Short Time

02:00’ - 03:10’ 14,0 - 15,5 1,40 - 1,70

3. Auto Normal Yes

Delayed start – Tabs –

Extra Dry – Zone wash –

Short Time

01:30’ - 02:30’ 14,5 – 16,0 1,15 - 1,30

4. Auto Fast No

Delayed start – Tabs

00:40’ - 01:20’ 13,0 - 14,5 1,15- 1,25

5. Duo Wash Yes

Delayed start – Tabs –

Extra Dry – Short Time

02:00’ 18,0 1,25

6. Delicate Yes

Delayed start – Tabs –

Extra Dry

01:40’ 11,0 1,05

7. Express 30’ No

Delayed start – Tabs

00:30’ 9,0 0,50

8. Soak No

Delayed start

00:12’ 4,5 0,01

Special wash cycles and Options

Notes:

Optimum performance levels when using the “Fast wash”

and“Express30’”cyclescanbeachievedbyrespectingthe

specified number of place settings.

To reduce consumption even further, only run the dishwasher

when it is full.

Note for Test Laboratories: forinformationoncomparativeEN

testing conditions, please send an email to the following address:

[email protected]

Wash options*

The OPTIONS may only be set, changed or reset after

the wash cycle has been selected and before the Start/

Pause button has been pressed.

Only the options which are compatible with the type of wash

cycle set may be selected. If an option is not compatible

with the selected wash cycle

(see Table of wash cycles)

, the

correspondingsymbol/indicatorlightflashesrapidly3times.

If an option is selected which is not compatible with another

previously-selected option, it flashes 3 times and goes off, while

the option selected first will remain active.

To deselect an option which has been set by mistake, press

the corresponding symbol/button again.

Delayed start

It is possible to delay the start of the cycle for a period

of time between 1 and 24 hours.

1.Afterselectingthedesiredwashcycleandanyotheroptions,

presstheDELAYEDSTARTsymbol;thesymbolonthedisplay

lightsup.PresstheDELAYEDSTARTsymboltoselectthetime

atwhichyouwishthewashcycletobegin(1to24hours.)

2. Confirm your selection using the Start/Pause symbol; the

countdown will begin. The selected delay period is displayed.

3.Oncethistimehaselapsed,theDELAYEDSTARTindicator

light goes off and the wash cycle begins.

Todeselectit,pressandholdtheDELAYEDSTARTsymboluntil

the text OFF appears.

The DELAYED START function cannot be set once a

wash cycle has been started.

Multi-functional tablets

This option optimises washing and drying results.

When using multi-functional tablets, press the MULTI-

FUNCTIONAL TABLETS button, the indicator light will

illuminate. The “Multi-functional tablets” option results in

the lengthening of the wash cycle.

The use of tablets is only recommended when the

MULTI-FUNCTIONAL TABLETS option is available.

This option is not recommended for use with wash

cycles which do not specify the use of multi-functional

tablets.

Extra drying

To improve the dryness level of the crockery, press

theEXTRADRYINGbutton,theindicatorlightwillilluminate.

If it is pressed again the option will be deselected.

Ahighertemperatureduringthefinalrinseandanextended

drying phase allow for improving drying.

The EXTRA DRYING option increases the duration of

the wash cycle.

* Only available in selected models.

Zone Wash

This option makes it possible to carry out the wash

cycle in the selected rack only. Select the wash cycle and

thenpresstheZONEWASHbutton:theselectedracklights

up and the wash cycle starts in the selected rack only. Press

the button again to deselect the option.

The option is available with the following wash cycles:

Intensive and Normal.

Select the option and the Intensive cycle to start the

ULTRAINTENSIVEZONEwashing.Thiswashcycleisideal

for very soiled mixed loads, e.g. pans and saucepans,

dishes with heavy encrustation or difficult-to-clean crockery

(grater, vegetable mill, dirty cutlery). The spraying pressure is

stronger and the washing temperature higher, thus ensuring

optimum handling of stubborn stains.

Select the option and the Normal cycletostarttheSAVING

ZONEwashing.Thisfunctionmakesitpossibletoreduce

energyconsumption.Cycledurationmightchange.

Remember to load the crockery in the selected rack only

Short Time

This option can be used to reduce the duration of

the main wash cycles while, maintaining the same washing

and drying performance levels. After selecting the wash

cycle,presstheSHORTTIMEbutton;theilluminationofthe

corresponding indicator light indicates its selection. Press

it again to deselect it.

Rinse aid and refined salt

Only use products which have been specifically designed

for dishwashers.

Do not use table salt or industrial salt, or washing up liquid.

Follow the instructions given on the packaging.

If using a multi-functional product it is not necessary to any

add rinse aid; however, we recommend that you add salt,

especially if you live in an area where the water is hard or

very hard.

(Follow the instructions given on the packaging).

If you do not add salt or rinse aid, the LOW SALT* and

LOW RINSE AID indicator lights will remain lit.

Measuring out the rinse aid

Rinseaidmakesiteasierforthecrockerytodry,aswaterruns

off surfaces more readily and therefore does not leave streaks

or marks. The rinse aid dispenser should be filled:

•WhentheLOWRINSEAID* indicator light on the control panel

is illuminated, a reserve supply of rinse aid is still available

for1-2cycles;

1.Openthedispenser

“D” by pressing and pulling up the tab

on the lid;

2. Carefully introduce the rinse aid as far as the maximum

reference notch of the filling space - avoid spilling it. If this

happens, clean the spill immediately with a dry cloth.

3. Press the lid down until you hear a click to close it.

NEVER pour the rinse aid directly into the tub.

Rinse-aid quantity setting

If you are not completely satisfied with the drying results, you

canadjustthequantityofrinseaid.Switchthedishwasheron

and off using the ON/OFF button. Press the Start/Pause button

3 times. Start it using the ON/OFF button; the setting is shown

on the display

(set to factory level).

AdjustthelevelofrinseaidsupplyusingtheP button.

Press ON/OFF to save the setting.

IftherinseaidlevelissettoZERO,norinseaidwillbesupplied.

TheLOWRINSEAIDindicatorlightwillnotgoonifyourunout

of rinse aid.

Uptomaximum4levelscanbesetbasedonthedishwasher

model.

• Iftherearestreaksonthecrockery,setalownumber(1-2.)

• If thereare drops of wateror limescale marks, seta high

number (3-4.)

Setting water hardness

Everydishwasherisequippedwithawatersoftenerwhichuses

refined salt designed specially for this type of appliance to supply

water without limescale - used to wash the crockery.

This dishwasher has a setting which helps to reduce pollution

and optimises washing performance in accordance with the

water hardness level in your area. This information can be

obtained from your local water supplier.

Switch the dishwasher on and off using the ON/OFF button.

Water Hardness Table

Average salt container

capacity duration**

Level °dH °fH mmol/l months

1 0 - 6 0 - 10 0 - 1 7 months

2 6 - 11 11 - 20 1,1 - 2 5 months

3 12 - 17 21 - 30 2,1 - 3 3 months

4 17 - 34 31 - 60 3,1 - 6 2 months

34 - 50 61 - 90 6,1 - 9 2/3 weeks

For values between 0°f and 10°f, we do not recommend the

use of salt

. * this setting may cause a slight increase in the

duration of the cycles. ** for 1 wash cycle per day.

Press and hold down the Start/Pause button for a few seconds

until you hear a beep. Switch the dishwasher on using ON/

OFF; the set level will appear on the display

(water softener set

to medium level).

AdjustthehardnesslevelusingtheP button

(1-2-3-4-5* see the

water hardness table)

up to max 5 levels.

Press ON/OFF to save the setting.

Evenifusingmulti-functionaltablets,fillthesaltdispenser.

(°dH=hardnessmeasuredinGermandegrees-°f=hardness

measuredinFrenchdegrees–mmol/l=millimolesperlitre)

Measuring out the refined salt

In order to obtain the best possible results from a wash cycle,

make sure that the salt dispenser is never empty.

Refinedsaltremoveslimescalefromthewater,thusavoiding

the formation of deposits on crockery.

The salt dispenser is located in the lower part of the dishwasher

(seeDescription)

and should be filled:

• Whenthegreenfloat

* cannot be seen by simply looking at

the cap of the salt dispenser;

•WhentheLOWRINSEAIDindicatorlightonthecontrolpanel

is illuminated

1. Remove the lower rack and

unscrew the cap (anticlockwise).

2.Thefirsttimeyoudothis:fillthe

water tank right up to its edge.

3. Position the funnel

(see figure)

and fill the salt dispenser up to the

edge (approximately 1 kg). It is

normal for a little water to leak out.

4.Removethefunnel*andwipeany

salt residues away from the opening; rinse the cap under running

water and then screw it on, the head facing downwards so as to

let the water flow out of the four slots (star-shaped) on the lower

part of the cap (cap with green float

*).

It is advisable to perform this procedure every time you add

salt to the dispenser.

Makesurethecapisscrewedontightlysothatnodetergentcan

get into the container during the wash cycle (this could damage

the water softener beyond repair).

Whennecessary,measureoutthesaltbeforeawashcycle

so that any saline solution which has leaked out of the salt

dispenser is removed.

* Only available in selected models.

Shutting off the water and electricity

supplies

• Turnoffthewatertapaftereverywashcycletoavoidleaks.

• Always unplug the appliance when cleaning it and when

performing maintenance work.

Cleaning the dishwasher

• Theexternalsurfacesofthemachineandthecontrolpanel

can be cleaned using a non-abrasive cloth which has been

dampenedwithwater.Donotuseabrasivedetergentsor.

solvents.

• Anymarksontheinsideoftheappliancemayberemoved

using a cloth dampened with water and a little vinegar.

Preventing unpleasant odours

• Alwayskeepthedooroftheapplianceajarinordertoavoid

moisture from forming and being trapped inside the machine.

• Cleanthesealsaroundthedooranddetergentdispensers

regularly using a damp sponge. This will avoid food becoming

trapped in the seals, which is the main cause behind the

formation of unpleasant odours.

Cleaning the sprayer arms

Food residue may become encrusted onto the sprayer arms

and block the holes used to spray the water. It is therefore

recommended that you check the arms from time to time and

clean them with a small non-metallic brush.

The two sprayer arms may both be removed.

To remove the upper sprayer

arm, turn the plastic locking ring

in an anti-clockwise direction.

The upper sprayer arm should be

replaced so that the side with the

greater number of holes is facing

upwards.

The lower sprayer arm can be

removed by pressing on the side

tabs and pulling it upwards.

Cleaning the water inlet filter*

If the water hoses are new or have not been used for an extended

period of time, let the water run to make sure it is clear and free of

impurities before performing the necessary connections. If this

precaution is not taken, the water inlet could become blocked

and damage the dishwasher.

Cleanthewaterinletfilteratthetapoutletregularly.

- Turn off the water tap.

-Unscrewtheendofthewaterinlethose,removethefilterand

clean it carefully under running water.

-Re-placethefilterandscrewthewaterhosebackintoposition.

Cleaning the filters

The filter assembly consists of three filters which remove food

residues from the washing water and then recirculate the water.

They should be cleaned if you wish to achieve the best results

in every wash.

Cleanthefiltersregularly.

The dishwasher should not be used without filters or if the

filter is loose.

•Afterseveralwashes,checkthefilterassemblyandifnecessary

clean it thoroughly under running water, using a non-metallic

brush and following the instructions below:

1. Turn the cylindrical filter C in an anti-clockwise direction and

pull it out

(fig.1).

2.RemovethecupfilterB by exerting a slight pressure on the

side flaps

(fig.2);

3. Slide out the stainless-steel plate filter A.

(fig. 3).

4. Inspect the trap and remove any food residues. NEVER

REMOVE the wash-cycle pump protection

(black detail) (fig.4).

Aftercleaningthefilters,re-placethefilterassemblyandfixitin

position correctly; this is essential for maintaining the efficient

operation of the dishwasher.

Leaving the machine unused for extended

periods

• Disconnecttheappliancefromtheelectricitysupplyandshut

off the water tap.

• Leavethedooroftheapplianceajar.

•Whenyoureturn,runawashcyclewhenthedishwasheris

empty.

Care and maintenance

* Only available in selected models.

Troubleshooting

Whenevertheappliancefailstoworkproperly,checkforasolutionfromthefollowinglistbeforecallingforAssistance

* Only available in selected models.

Problem: Possible causes / Solutions:

The dishwasher does not start or

cannot be controlled.

• Switch off the appliance by pressing the ON/OFF button, switch it back on

after approximately one minute and reset the program.

• The appliance has not been plugged in properly.

• The dishwasher door has not been shut properly.

The door won’t close.

• The lock was released. Strongly push the door until a “clacking” noise is

heard.

No water drains from the

dishwasher.

• The dishwasher cycle has not finished yet.

• The water drain hose is bent (see Installation).

• The drain duct is blocked.

• The filter is clogged up with food residues.

The dishwasher is too noisy.

• The dishes are rattling against each other or against the sprayer arms.

• An excessive amount of foam has been produced: the detergent has not

been measured out correctly or it is not suitable for use in dishwashers (see

Start-up and use.)

The dishes and glasses are

covered in a white film or

limescale deposits.

• The level of refined salt is low or the dosage setting is not suited to the

hardness of the water (see Rinse aid and salt.)

• The lid on the salt dispenser was not closed properly.

• The rinse aid has been used up or the dosage is too low.

The dishes and glasses are

streaked or have a bluish tinge.

• The rinse aid dosage is too high.

The crockery has not been dried

properly.

• A wash cycle without a drying cycle has been selected.

• The rinse aid has been used up or the dosage is too low (see Rinse aid and

salt).

• The rinse aid setting is not suitable.

• The crockery is made from non-stick material or plastic.

The crockery is not clean.

• The racks are overloaded (see Loading the racks.)

• The crockery has not been arranged properly.

• The sprayer arms cannot move freely.

• The wash cycle is too gentle (see Wash cycles.)

• An excessive amount of foam has been produced: the detergent has not

been measured out correctly or it is not suitable for use in dishwashers (see

Start-up and use.)

• The lid on the rinse aid compartment was not shut correctly.

• The filter is dirty or blocked (see Care and maintenance.)

• The refined salt level is low (see Rinse aid and salt.)

• Switch off the appliance by pressing the ON/OFF button. Turn off the water

tap to avoid any flooding and unplug the appliance.

Make sure the water inlet filter has not become blocked by impurities (see

“Care and maintenance” chapter.)

The dishwasher does not take

any water in - Tap shut-off

alarm.

Beeps are heard and H2O is displayed.

F 6 is displayed.

• There is no water in the mains supply.

• The water inlet hose is bent (see Installation.)

• Turn on the tap and the appliance will start after a few minutes.

• The appliance stopped because no action was taken when the beeps

sounded.

Switch off the machine using the ON/OFF button, turn on the tap and switch

the machine back on after a few seconds by pressing the same button. Re-

program the appliance and restart the wash cycle.

Instrukcja obsługi

Polski, 16

LLD 8M132

ZMYWARKA

Spis treści

Karta produktu, 17

Zalecenia i środki ostrożności, 18-19

Bezpieczeństwo ogólne

Utylizacja

Oszczędność i ochrona środowiska

Instalacja i serwis, 20-21

Ustawienie i wypoziomowanie

Połączenie hydrauliczne i elektryczne

Dane techniczne

Przed pierwszym użyciem

Serwis

Opis urządzenia, 22

Widok ogólny

Panel sterowania

Napełnianie koszy, 23-24

Kosz dolny

Koszyk na sztućce

Kosz górny

Taca na sztućce

Regulacja górnego kosza

Uruchomienie i użytkowanie, 25

Uruchomienie zmywarki

Napełnianie dozownika detergentu

Programy, 26

Tabela programów

Programy specjalne i opcje, 27

Środek nabłyszczający i sól

regeneracyjna, 28

Wlewanie płynu nabłyszczającego

Wsypywanie soli ochronnej

Konserwacja i utrzymanie, 29

Odłączenie od wody i prądu

Czyszczenie zmywarki

Zapobieganie nieprzyjemnym zapachom

Czyszczenie spryskiwaczy

Czyszczenie ltra dopływu wody

Czyszczenie ltrów

W przypadku dłuższej nieobecności

Nieprawidłowości w działaniu i sposoby

ich usuwania, 30

Karta produktu

Marka

HOTPOINT ARISTON

Nazwa modelu

LLD 8M132

Pojemność znamionowa, wyrażona liczbą standardowych kompletów naczyń (1)

Klasa efektywności energetycznej, skla od A+++ (niskie zużycie) do D (wysokie zużycie)

A+++

Zużycie energii w kWh rocznie (2)

238.0

Zużycie energii w standardowym cyklu zmywania w kWh

0.83

Zużycie energii w trybie wyłączenia i trybie czuwania w W

0.5

Zużycie energii w trybie włączenia i trybie czuwania w W

5.0

Roczne zużycie wody w litrach rocznie (3)

2520.0

Klasa efektywności suszenia, skala od G (minimalna efektywność) do A (maksymalna efektywność)

Czas programu dla standardowego cyklu zmywania w minutach

190’

Czas trwania trybu czuwania w minutach

Poziom emitowanego hałasu w dB(A) re1 pW

Model do zabudowy

Tak

Uwagi

1) Informacja, że cykl jest odpowiedni do zmywania normalnie zabrudzonych zastaw stołowych oraz że jest najbardziej efektywnym

programem pod względem łącznego zużycia energii i wody dla tego rodzaju zastawy stołowej; Standardowy cykl zmywania odpowiada

cyklowi Eco.

2) Na podstawie 280 standardowych cykli zmywania, przy użyciu zimnej wody, oraz w trybie niskiego zużycia energii. Rzeczywiste

zużycie energii zależy od sposobu użycia urządzenia.

3) Na podstawie 280 standardowych cykli zmywania. Rzeczywiste zużycie energii zależy od sposobu użycia urządzenia.

Karta produktu

* Tylko w niektórych modelach.

Zalecenia i środki ostrożności

Niniejsze urządzenie zostało zaprojektowane

i wyprodukowane zgodnie z międzynarodowymi

normami bezpieczeństwa. Poniższe ostrzeżenia

podane zostały ze względów bezpieczeństwa i

należy je uważnie przeczytać.

Należy zachować niniejszą książeczkę instrukcji

dla przyszłych konsultacji. W przypadku sprzedaży,

odstąpienia lub przeprowadzki należy dopilnować,

aby została przekazana wraz z urządzeniem

nowemu właścicielowi.

Uważnie przeczytać instrukcję: zawiera ona ważne

informacje dotyczące instalacji, użytkowania i

bezpieczeństwa.

To urządzenie zostało zaprojektowane do użytku

domowego lub podobnych zastosowań, na

przykład:

- w pomieszczeniach przystosowanych do użytku

kuchennego przez personel w sklepach, biurach i

innych miejscach pracy;

- w domach kolonijnych;

- do użytku przez klientów w hotelach, motelach i

innych obiektach typu mieszkaniowego;

- w pensjonatach bed and breakfast.

Bezpieczeństwo ogólne

• Niniejsze urządzenie może być używane

przez dzieci powyżej 8 roku życia oraz osoby

o ograniczonych zdolnościach fizycznych,

zmysłowych i umysłowych lub nie posiadające

jego odpowiedniej znajomości lub doświadczenia,

pod warunkiem, że są one nadzorowane

bądź też otrzymały instrukcje dotyczące

bezpiecznego użytkowania urządzenia oraz

zrozumiały związane z nim zagrożenia.

• Dzieci nie powinny bawić się urządzeniem.

Czyszczenie oraz konserwację urządzenia musi

przeprowadzać użytkownik. Nie mogą być one

przeprowadzane przez dzieci bez nadzoru.

• Urządzenie jest przeznaczone do użytku

nieprofesjonalnego wewnątrz pomieszczeń

mieszkalnych.

• Urządzenie powinno być używane do mycia

naczyń w warunkach domowych wyłącznie

przez osoby dorosłe i zgodnie z niniejszymi

instrukcjami.

• Urządzenia nie należy instalować na świeżym

powietrzu, nawet w miejscu zadaszonym, gdyż

wystawienie go na działanie deszczu i burz jest

bardzo niebezpieczne.

• Nie dotykać zmywarki, stojąc boso na podłodze.

• Przy wyjmowaniu wtyczki z gniazdka nie

ciągnąć za kabel, lecz trzymać za wtyczkę.

• Przed przystąpieniem do czyszczenia i

konserwacji urządzenia należy zamknąć zawór

wody i wyjąć wtyczkę z gniazdka.

• W razie uszkodzenia w żadnym wypadku

nie ingerować w wewnętrzne mechanizmy

urządzenia i nie próbować go samodzielnie

naprawiać.

• Nie opierać się ani nie siadać na otwartych

drzwiach: urządzenie mogłoby się przewrócić.

• Nie należy pozostawiać otwartych drzwi

zmywarki, gdyż można o nie zawadzić.

• Trzymać detergenty i płyn nabłyszczający z dala

od dzieci.

• Opakowania nie są zabawkami dla dzieci.

• Noże i przyrządy o ostrych końcach należy

wkładać do kosza na sztućce, tak aby czubki były

skierowane do dołu, lub układać na półeczkach

kosza górnego w położeniu poziomym.

Utylizacja

• Utylizacja materiałów opakowaniowych:

dostosować się do lokalnych przepisów; w

ten sposób opakowanie będzie mogło zostać

ponownie wykorzystane.

• Dyrektywa wspólnotowa 2012/19/EU w sprawie

zużytego sprzętu elektrycznego i elektronicznego

(WEEE) przewiduje, że sprzęt gospodarstwa

domowego nie powinien być usuwany jako

nieposortowane odpady komunalne. Zużyte

urządzenia powinny podlegać selektywnej

zbiórce w celu uzyskania maksymalnego

wskaźnika odzysku i recyklingu ich materiałów

składowych oraz uniknięcia ewentualnych

zagrożeń dla zdrowia i środowiska. Symbol

przekreślonego kosza umieszczany jest na

wszystkich produktach w celu przypominania

o obowiązku segregacji odpadów.

W celu uzyskania bliższych informacji na

temat prawidłowego złomowania urządzeń

gospodarstwa domowego ich właściciele mogą

się zwrócić do właściwych służb publicznych lub

do sprzedawców tych urządzeń.

Oszczędność i ochrona środowiska

Oszczędność wody i energii

• Uruchamiać zmywarkę tylko z pełnym ładunkiem.

• W oczekiwaniu na napełnienie maszyny

zapobiegać przykrym zapachom przy pomocy

cyklu namaczania

(patrz programy)

• Wybierać programy odpowiednie do rodzaju

naczyń i stopnia zabrudzenia, stosując się do

Tabeli programów:

- dla naczyń normalnie zabrudzonych stosować

program Eco, który zapewnia niskie zużycie

energii i wody.

- przy ograniczonym ładunku włączyć opcję

Połowa ładunku*

(zob. Uruchomienie i

użytkowanie).

• Jeśli zawarta umowa na dostawę energii

elektrycznej przewiduje strefy czasowe

oszczędności energetycznej, uruchamiać

zmywarkę w godzinach obowiązywania

niższej taryfy. Opcja Opóźnienia startu*

(zob.

Uruchomienie i użytkowanie)

może pomóc

zorganizować zmywanie pod tym kątem.

Detergenty bez fosforanów, bez chloru i

zawierające enzymy

• Zdecydowanie zaleca się stosowanie

detergentów niezawierających fosforanów i

chloru, gdyż są one najbardziej wskazane dla

ochrony środowiska.

• Enzymy wykazują szczególną skuteczność

w temperaturach zbliżonych do 50°C, przez

co enzymatyczne środki myjące mogą

być stosowane do zmywania w niższych

temperaturach uzyskując takie samy wyniki

jakie osiągnięto by bez nich w przypadku

temperatury 65°C.

• Odpowiednio dozować detergenty w oparciu o

zalecenia producenta, zależnie od twardości

wody, stopnia zabrudzenia i ilości naczyń,

unikając tym samym niepotrzebnych strat.

Choć środki myjące są biodegradalne, zawsze

zawierają one składniki zakłócające równowagę

środowiska.

W przypadku przenoszenia należy trzymać urządzenie w

pozycji pionowej; w razie konieczności przechylić je do tyłu.

Ustawienie i wypoziomowanie

1. Rozpakować urządzenie i sprawdzić, czy nie zostało

uszkodzone podczas transportu. Jeśli okazałoby się uszkodzone,

nie podłączać go, lecz skontaktować się ze sprzedawcą.

2. Ustawić zmywarkę, przysuwając jej boki lub tył do sąsiadujących

mebli lub do ściany. Urządzenie można również wbudować pod

blatem kuchennym

(zob. Karta montażu)

3. Postawić zmywarkę na równym i twardym podłożu.

Skompensować nierówności odkręcając lub dokręcając przednie

nóżki, aż urządzenie znajdzie się w pozycji poziomej. Dokładne

wypoziomowanie zapewnia stabilność i zapobiega drganiom,

hałasom i zmianom pozycji urządzenia.

*. Aby wyregulować wysokość tylnej nóżki, należy przekręcić

sześciokątną tuleję w kolorze czerwonym, znajdującą się w

dolnej, przedniej, środkowej części zmywarki za pomocą klucza

sześciokątnego 8 mm, obracając ją w kierunku zgodnym z

ruchem wskazówek zegara, aby zwiększyć wysokość, a w

kierunku przeciwnym do ruchu wskazówek zegara, aby ją

zmniejszyć.

(patrz ulotka z instrukcjami dotyczącymi zabudowy

załączona do dokumentacji)

Połączenie hydrauliczne i elektryczne

Przystosowanie instalacji elektrycznej oraz hydraulicznej

powinno być dokonywane wyłącznie przez wykwalikowany

personel.

Zmywarka nie może być ustawiona na przewodach rurowych

ani na kablu zasilania elektrycznego.

Zmywarkę należy podłączyć do sieci wodociągowej za

pomocą nowych węży doprowadzających.

Nie używać starych węży.

Wąż doprowadzający i odprowadzający wodę, jak również kabel

zasilający można skierować na prawo lub na lewo, aby umożliwić

optymalną instalację.

Podłączenie węża doprowadzającego wodę

• Do zaworu wody zimnej: dokładnie przykręcić wąż

doprowadzający do zaworu z gwintem 3/4 GAZ; przed

przykręceniem węża odkręcić wodę i poczekać, aż będzie

całkiem czysta, tak aby ewentualne nieczystości nie zapchały

urządzenia.

• Do zaworu wody ciepłej: w przypadku instalacji centralnego

ogrzewania zmywarka może być zasilana ciepłą wodą

wodociągową, pod warunkiem że jej temperatura nie

przekracza 60°C.

Przykręcić wąż do zaworu w taki sam sposób jak w przypadku

wody zimnej.

Jeśli wąż doprowadzający okaże się za krótki, zwrócić się

do specjalistycznego sklepu lub wykwalikowanego technika

(zob. Serwis)

Ciśnienie wody powinno mieścić się w zakresie wartości

podanych w tabeli danych technicznych

(patrz obok)

Dopilnować, aby nie zgiąć ani nie skręcić węża.

Podłączenie węża odprowadzającego wodę

Podłączyć przewód odprowadzający, nie zginając go, do

przewodu kanalizacyjnego o średnicy minimum 4 cm.

Przewód odprowadzający musi znajdować się na wysokości od

40 do 80 cm od podłogi lub podłoża, na którym umieszczono

zmywarkę (A).

Przed podłączeniem przewodu odprowadzającego wodę do

syfonu zlewozmywaka, należy usunąć plastikową zatyczkę (B).

Zabezpieczenie przed zalaniem

Aby zagwarantować, że nie dojdzie do zalania, zmywarka:

- posiada system przerywający dopływ wody w przypadku

wystąpienia anomalii lub wydostawania się wody ze środka.

Niektóre modele wyposażone są w dodatkowe urządzenie

zabezpieczające New Acqua Stop

*, które gwarantuje ochronę

przed zalaniem również w przypadku pęknięcia przewodu

doprowadzającego wodę.

UWAGA: NIEBEZPIECZNE NAPIĘCIE!

Węża doprowadzającego wodę nie można w żadnym wypadku

przecinać, gdyż zawiera części pod napięciem.

Podłączenie do sieci elektrycznej

Przed włożeniem wtyczki do gniazdka należy się upewnić, czy:

• gniazdko ma uziemienie i jest zgodne z obowiązującymi

przepisami;

• gniazdko jest w stanie wytrzymać obciążenie maksymalnej

mocy urządzenia wskazane na tabliczce znamionowej

umieszczonej na drzwiach wewnętrznych

(zob. Opis zmywarki);

• napięcie zasilania zawiera się w przedziale wartości podanych

na tabliczce znamionowej umieszczonej na drzwiach

wewnętrznych;

• gniazdko jest kompatybilne z wtyczką urządzenia. W

przeciwnym wypadku zwrócić się do wykwalikowanego

technika o wymianę wtyczki

(zob. Serwis)

; nie używać

przedłużaczy ani rozgałęziaczy.

Po zainstalowaniu urządzenia przewód zasilana elektrycznego

oraz gniazdko elektryczne powinny być łatwo dostępne.

Kabel nie powinien być powyginany ani przygnieciony.

Jeśli przewód zasilający jest uszkodzony, powinien zostać

wymieniony przez producenta lub jego serwis techniczny, aby

uniknąć wszelkiego ryzyka.

(zob. Serwis)

Instalacja Serwis Techniczny

* Tylko w niektórych modelach.

Strona jest ładowana ...

Whirlpool LLD 8M132 X EU instrukcja

Marka: Whirlpool

Model: LLD 8M132 X EU

Kategoria: Zmywarki

Typ: instrukcja

ściągnij PDF

raport

w innych językach

slovenčina: Whirlpool LLD 8M132 X EU Užívateľská príručka
English: Whirlpool LLD 8M132 X EU User guide

Powiązane dokumenty

Inne dokumenty

KitchenAid KICO 3T133 PFES instrukcja