before plugging in
l
Make sure your electricity supply is
the same as the one shown on the
rear of your handmixer.
l
No action is required to switch
between 50Hz and 60Hz
Important – Plug and Fuse
Information
l
The wires in the cord are coloured
as follows:
Blue = Neutral
Brown = Live
l
If the plug supplied with your
appliance has a fuse fitted it is
rated 3A. If the fuse fails it must
be replaced with one of the same
rating.
Note:
l
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse
cover is lost then the plug must
not be used until a replacement
can be obtained. The correct fuse
cover is identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
l
If a non-rewireable plug is cut
off it must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
l
This appliance conforms to EC
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
before using your handmixer
for the first time
l
Wash the parts (see ‘cleaning’).
key
a speed switch
HM520 - 3 speed
HM530 - 5 speed
b tool release button
c beaters
d kneader with collar (if supplied)
e kneader without collar (if supplied)
f tool storage
g cord tidy
to use your handmixer
1 Unwrap the cord and make sure
the speed switch a is in the off “O”
position. Ensure the tool storage f
has been removed.
2 Insert the beaters or kneaders 1 –
turn and push until a positive click is
felt.
Important: The kneader with the
collar d will only fit into the larger
socket.
3 Plug in.
4 With the ingredients in a bowl of an
appropriate size, place the beaters/
kneaders into the bowl.
5 Pull the speed switch backwards
to reach the desired speed (the first
dot on the handmixer body is the
slowest speed setting). Line up the
dot on the side of the speed switch
with the corresponding speed.
l
As the mixture thickens, increase the
speed.
l
If the machine starts to slow or
labour, increase the speed.
l
Move the speed switch forwards
to the pulse “P” position to operate
the motor at maximum speed. The
motor will operate for as long as the
pulse is held in position.
6 When the mixture has reached the
desired consistency, return the speed
switch to the off “O” position and
then lift the beaters/kneaders out of
the bowl.
7 To remove the tools, make sure
the speed switch is in the off “O”
position and unplug the handmixer.
Press the tool release button b.
Hold onto the tool shafts when
ejecting the tools.
Important:
l
kneaders only - when making
bread dough, we recommend that
the dough load does not exceed
450g flour.
hints
l
When creaming for cake mixtures,
use butter or margarine at room
temperature or soften before use.
l
To avoid overloading your mixing
bowl, select one of an appropriate
size.
4