Yamaha R96V Instrukcja obsługi

Marka: Yamaha

Model: R96V

Kategoria: Korektory dźwięku

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Using Studio Manager

Windows

Getting Started

Using SM WindowsKeyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Special Notices

•The software and this owner’s manual are the exclu-

sive copyrights of Yamaha Corporation.

•Copying of the software or reproduction of this man-

ual in whole or in part by any means is expressly for-

bidden without the written consent of the

manufacturer.

•Copying of the commercially available music

sequence data and/or digital audio ﬁles is strictly pro-

hibited except for your personal use.

•Yamaha makes no representations or warranties with

regard to the use of the software and documentation

and cannot be held responsible for the results of the

use of this manual and the software.

•This disc is a CD-ROM. Do not attempt to play the

disc on an audio CD player. Doing so may result in

irreparable damage to your audio CD player.

•The screen displays as illustrated in this owner’s man-

ual are for instructional purposes, and may appear

somewhat different from the screens which appear on

your computer.

•Future upgrades of application and system software

and any changes in speciﬁcations and functions will

be announced separately.

Trademarks

•Adobe, Acrobat, and Reader are registered trademarks of

Adobe Systems Incorporated. Apple, AppleTalk, and

Macintosh are registered trademarks of Apple Com-

puter, Inc. Microsoft and Windows are registered trade-

marks of Microsoft Corporation. All other trademarks

are the property of their respective holders and are

hereby acknowledged.

•No part of the Studio Manager software or its docu-

mentation may be reproduced or distributed in any

form or by any means without the prior written

authorization of Yamaha Corporation.

YAMAHA PRO AUDIO GLOBAL

SITE

http://www.yamahaproaudio.com/

Contents

Getting Started ......................................... 2

Starting and Setting Up Studio Manager ............ 2

Quitting Studio Manager ..................................... 3

Configuring the Editor ......................................... 4

Synchronizing Studio Manager ........................... 6

Offline Edit Function ............................................ 6

Working with Sessions ......................................... 7

Undo/Redo Function ........................................... 7

Other Functions .................................................... 8

Using Studio Manager Windows .............. 9

Master Window .................................................... 9

Layer Windows ................................................... 10

Selected Channel Window ................................. 14

Library Window .................................................. 19

Patch Editor Window ......................................... 21

Surround Editor Window .................................. 26

Timecode Counter Window .............................. 27

Effect Editor Window ......................................... 27

Meter Window .................................................... 28

Keyboard Shortcuts ................................ 29

Index ....................................................... 30

*Speciﬁcations and descriptions in this owner ’s manual

are for information purposes only. Yamaha Corp.

reserves the right to change or modify products or

speciﬁcations at any time without prior notice. Since

speciﬁcations, equipment or options may not be the

same in every locale, please check with your Yamaha

dealer.

Owner’s Manual

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Getting Started

To use Studio Manager, you must follow these steps:

> Start Studio Manager.

> Conﬁgure the Editor.

> Synchronize Studio Manager.

Starting and Setting Up Studio Manager

Start Studio Manager.

Windows 2000:

Click the Start button, move the cursor to [Programs], then [YAMAHA Studio

Manager], then click [Studio Manager].

Windows XP:

Click the Start button, move the cursor to [All Programs], then [YAMAHA

Studio Manager], then click [Studio Manager].

Mac OS X:

Select [Applications], [YAMAHA], then [Studio Manager], then double-click [Stu-

dio Manager].

Select the device you want to edit.

The names of all installed devices are displayed in the

Device Editor section. Select the desired device, the click

the [Add ->] button.

The selected device name appears in the Workspace sec-

tion.

Specify a MIDI port.

Select the [MIDI Ports] tab and specify the MIDI In, Out,

and Thru ports to which the console is connected.

Description of menus and buttons

In the event that menu and button names on the Windows system are different from those on

the Macintosh system, this manual uses the Windows menu and button names followed by the

Macintosh menu and button names in parentheses.

Note: If you plan to use the same device in the future, click

the [Set Default] button while the appropriate device name

is listed in the Workspace section. The next time you start

Studio Manager, the device will be automatically selected.

Note: To activate a MIDI port in Studio Manager, you must

also specify the MIDI port in the console’s Editor separately.

Refer to the “Conﬁguring the Editor” on page 4 described

later for information on specifying a MIDI port in Editor.

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Click [OK].

The Studio Manager host window is displayed.

Double-click the icon of the console you want to edit.

The Editor for the console is displayed.

Quitting Studio Manager

Choose [Exit (Quit)] from the [File] menu in the host window.

If there are no unsaved changes, all windows close and Studio Manager quits. If there are unsaved

changes, a message asking whether or not you want to save the changes appears. Click [Yes] to save

the changes and quit, click [No] to quit, or click [Cancel] to cancel the operation. You can also quit

Studio Manager by clicking the host window’s Close button.

Studio Manager host window

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Conﬁguring the Editor

You must conﬁgure the following settings for each open Editor.

System Setup

To open the Setup window, choose [System Setup] from the [File] menu.

Be sure to specify the Input port and Output port.

Input port/Output port:

These pop-up menus are used to select the ports through which

Studio Manager will communicate with your Yamaha mixing console.

Console Device ID:

Studio Manager can control any one of up to eight Yamaha mixing con-

soles, each with its own exclusive ID. Select the ID of the console you want to control.

Channel Select:

These options determine whether or not channel selection is linked. When the

PC->Console option is on, selecting a channel in Studio Manager selects the same channel on the

console. When the Console->PC option is on, selecting a channel on the console selects the same

channel in Studio Manager.

Conﬁrmation:

These options determine whether or not a conﬁrmation dialog box appears

when storing, recalling, or patching.

Layer Select:

These options determine whether or not Layer selection is linked. When the

PC->Console option is on, selecting a Layer in Studio Manager selects the same Layer on the con-

sole. When the Console->PC option is on, selecting a Layer on the console selects the same Layer

in Studio Manager.

Window Control from Console:

This option determines whether or not using the USER

DEFINED KEYS on the console enables you to remotely open and close the Studio Manager win-

dows.

Note: Specify a MIDI port (page 2) before making the following settings.

Note: Select the same MIDI ports that you speciﬁed in Step 3 as described on page 2.

Macintosh System Setup windowWindows System Setup window

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Console Setup

To open the Console Setup window, choose [Console Setup] from the [File] menu.

Surround Mode:

Select a Surround mode from STEREO, 3-1, 5.1, and 6.1.

Pair Mode:

These options determine whether the fader pair is Horizontal or Vertical.

Channel Copy Parameter:

Select desired parameters to copy from channel to channel.

02R96 Editor window

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Synchronizing Studio Manager

When Studio Manager starts up, the parameter settings on the console and the parameter settings

in Studio Manager may be different. Therefore, you must ﬁrst match the parameter settings on the

console with those in Studio Manager. This operation is called “synchronization.” Follow the steps

below to synchronize Studio Manager.

Select [Synchronize], then [Total Recall...] in the host window.

The following window opens.

Select whether you want to transfer your settings to Studio Manager, or vice versa.

To Hardware:

Tr ansfers the settings of the current Studio Manager Session to your console.

From Hardware:

Tr ansfers the settings of your console to the current Studio Manager Session.

Click [OK].

Ofﬂine Edit Function

If you do not want to synchronize your console with Studio Manager, select [Ofﬂine Edit] from the

[Synchronization] menu of each editor. To apply your off-line edits to your console, synchronize

the console with Studio Manager by selecting the To Hardware option.

The Ofﬂine Edit function is also activated when you click the [ONLINE]/[OFFLINE] button in the

Master window.

Do not operate the console while synchronization is in progress.

Note:

•You can synchronize the system for each Editor by choosing [Re-synchronize] from the [Syn-

chronization] menu of each Editor. At this time, the All Lib option determines whether or not

Scene and Library data is synchronized. If you synchronize the system from the host window,

Scene and Library data will always be synchronized.

•To protect any communication ports that are used with Studio Manager, synchronizing Studio

Manager by selecting the To Hardware option does not affect any communication settings on

the console (such as the MIDI, Remote Layers, and Machine Control settings).

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Working with Sessions

All of your Yamaha mixing console’s mix settings in Studio Manager, including Scene and library

data, are called Sessions. The following table describes how to handle Sessions.

If you save a Session in the host window, all selected Editor settings are saved in a ﬁle with a ﬁle

extension of “.YSM.”

If you save a Session in an Editor, only that Editor’s settings are saved in a ﬁle.

The Editor’s settings are saved in either the Studio Manager V2 format (ﬁle extension “.YSE”) or a

format that is compatible with earlier versions of Studio Manager (ﬁle extension varies depending

on the console you are using).

Note that earlier versions of Studio Manager cannot open a Session saved in the “.YSE” format.

Undo/Redo Function

In Studio Manager, you can cancel the latest operation (Undo) and also cancel the cancellation of

the latest operation (Redo). If you perform an Undo operation twice in a row, you can cancel the

two most-recent operations. If you perform an Undo operation three times in a row, you can can-

cel the three most-recent operations. In this way, you can cancel multiple recent operations. The

following table describes how to use the Undo/Redo function.

Please note, however, that after you perform one of the following operations, you cannot success-

fully undo or redo any previous operation:

•Closing Studio Manager

•Changing Surround mode (Stereo/3-1/5.1/6.1)

•Changing Pair mode (Horizontal/vertical)

•Synchronizing the console with Studio Manager

•Creating a new Session

•Saving a Session

•Copying and pasting a channel

•Creating or cancelling a channel pair

•Storing or recalling a scene or library

•Turning on or off the GATE: [LINK] button in the Selected Channel window

•Turning on or off the COMPRESSOR: [LINK] button in the Selected Channel window

•Turning on or off the [LINK] button in the Surround Editor window

Creating a new Session Choose [New (Session)] from the [File] menu.

Opening a previously saved Session Choose [Open (Session)] from the [File] menu.

Saving the current Session Choose [Save (Session)] from the [File] menu.

Saving the current Session with a new name Choose [Save (Session)] As from the [File] menu.

Note: In order to save the current Automix, or the settings of an optional Y56K card, in a Session, you

must ﬁrst resynchronize Studio Manager by selecting the From Hardware option.

Note:

•If you try to create a new session in the host window or open a saved session, a message asking

whether or not you want to save the currently-open session appears. Click [Yes] to save the current

session and open the new or saved session. Click [No] to open the new or saved session without

saving the current session. Click [Cancel] to cancel the operation.

•Studio Manager may be unable to open some ﬁles stored in SmartMedia. In this case, copy those

ﬁles onto a hard disk, then try to open them in Studio Manager.

Undo Choose [Undo] from the [Edit] menu.

Redo Choose [Redo] from the [Edit] menu.

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

•Changing Aux Send mode (Fixed/variable) on the console

• Starting automix recording or playback on the console

•Changing the sampling frequency (operated on the device)

•Changing the User Assignable Layer settings (operated on the device)

Other Functions

Copy & Paste Function

You can copy and paste not only the characters but the control positions in Studio Manager.

In the Console Setup window (page 5), you can also specify the parameters to be copied.

The following table describes how to use the Copy & Paste function.

Resetting to the default value (Ctrl ( ) + click)

Move the cursor to a control or a parameter value, then hold down the <Ctrl> key ( ) and click

the mouse button to reset the value to the default (e.g., to reset an Input Channel fader to –

∞

, or

reset a pan setting to Center).

Ctrl( )+Shift+Click

Move the cursor to a fader or AUX Send control, then hold down the <Ctrl> key ([ ]) and

<Shift> key and click the mouse button to reset the value to the nominal level.

Note: You cannot Undo or Redo the following operations:

•Edits in the Setup window

•Synchronization

•Opening and closing the windows

•Resizing the windows

Note: In the Library window, you can Undo or Redo only the most recent operation. You cannot cancel

the preceding operations.

Copying characters

Select copy source characters, right-click (<control>+click), then choose

[Copy].

Pasting characters

Move the cursor to the copy destination, right-click (<control>+click), then

choose [Paste].

Copying a channel Right-click (<control>+click) a copy source channel, then choose [Copy].

Pasting a channel

Right-click (<control>+click) the copy destination channel, then choose

[Paste].

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Using Studio Manager Windows

Master Window

The Master window enables you to switch between layers and control Stereo Out sig-

nals. To open this window, choose [Master] from the [Windows] menu.

[ONLINE]/[OFF LINE] button

Repeatedly clicking this button toggles between online and ofﬂine status.

This indicator is displayed when Studio Manager is connected to

the 02R96 correctly. If the connection is correct, the Studio Man-

ager parameters will work in unison with the 02R96 parameters.

This indicator is displayed when Studio Manager is not connected or

is not communicating with the 02R96, or when you have selected

Ofﬂine Edit. If the connection is incomplete, the Studio Manager

parameters will not work in unison with the 02R96 parameters.

Meters

These meters display the output level of the

Stereo Out when Surround mode is set to

“STEREO,” or the Bus Outs used for sur-

round processing when Surround mode is

set to 3-1, 5.1 or 6.1. The meters in 3-1, 5.1

and 6.1 Surround modes are shown on the

right.

LAYER buttons

These buttons are used to select the Layers.

PAN CONTROL

These buttons are used to select either

“STEREO” (Stereo mode) or “SURR” (Sur-

round mode). The Pan control on the Input

Channels is a rotary control when “STEREO” is selected, and a dot on a pan

graph when “SURR” is selected.

Scene number display

This display indicates the currently-recalled scene’s number.

[AUTO] button

This button displays the Automix status of the Stereo Out.

[SELECT] button

This button is used to select the Stereo Out.

[ON] button

This button turns the Stereo Out on and off. It appears orange while the Stereo

Out is on.

I Master fader

This is the Stereo Out fader.

J Fader value indicator

This indicator indicates the fader position in decibels (dB).

Note: If Studio Manager is not connected or is not communicating with the 02R96,

clicking this button will not switch the unit from ofﬂine to online.

3-1 5.1 6.1

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Layer Windows

The 02R96 Editor’s Layer window displays 24 channel strips. You can select a layer using the LAYER

buttons in the Master window. To open the Layer window, choose [Layer] from the [Windows] menu.

Input Channels

Selecting the 1-24, 25-48, or MASTER LAYER button in the Master window displays the

corresponding Input Channel strips.

A SOURCE parameter

This parameter is used to select an Input source. To select an Input source, click the

parameter and choose from the list that appears.

B Routing buttons

These buttons are used to route the Input Channel to the Bus Outs.

C [STEREO] button

This button is used to route the Input Channel’s signal to the Stereo Out.

D [DIRECT] button

This button turns on and off the Input Channel’s routing to its Direct Out.

E Direct Out parameter

This parameter is used to select the Direct Out destination. To select a destination,

click the parameter and choose from the list that appears.

F [PHASE] button

This button is used to reverse the signal phase of the channel.

G [INSERT] button

This button is used to turn on and off the Input Channel’s Insert.

H [GATE] button

This button is used to turn on and off the Input Channel’s Gate.

I Gate open/close indicators

These indicators display whether the Gate is open (green) or closed (red).

J Gate threshold

This displays the Gate Threshold, which can be set by dragging.

K [COMP] button

This button is used to turn on and off the Input Channel’s Compressor.

L Compressor curve

This display shows the Compressor’s curve.

M [EQ] button

This button is used to turn on and off the Input Channel’s EQ.

N EQ curve

This display shows the Equalizer’s curve, which can be set by dragging.

O [DELAY] button

This button is used to turn on and off the Input Channel’s Delay function.

P Delay parameter

This parameter is used to set the delay time of the Delay function. Delay times can be

set by dragging.

Note:

•You can selectively turn on or off some of channel strips by using the [View] menu.

•You can open multiple Layer windows. The second and subsequent open windows will indicate

“Locked” in the title, which means that these windows do not reﬂect layer selections made on the console

or in the Master window. If you want the Layer windows to reﬂect the changes, right-click each window

(Macintosh: <control> + click), then select the desired layer using the LAYER buttons.

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Q Channel number

This is the channel number. Double-click the channel number to open the Selected

Channel window.

R AUX section

These controls are used to set the levels of the Aux Sends. To set an Aux

Send level, drag its bar or click a point along the length of the bar. To turn

an Aux Send on or off, click its number.

The following table shows how the Aux Send controls appear depending

on the Aux Send On/Off and Pre/Post settings. Aux Sends can be set to

pre-fader or post-fader on the Selected Channel window (see “AUX

SEND section” on page 15).

S Pan/Aux Send display

This display shows the stereo or surround pan position or, while setting an Aux Send,

the Aux Send level in dB.

T PAN control

This control is used to set the Input Channel’s stereo or surround pan position.

When the PAN CONTROL in the Master Window is set to “STEREO,” the Pan con-

trol appears as a rotary control, and when set to “SURR,” the control appears as dot

on a pan graph. The surround pan position can be set by dragging the dot.

U LFE control

When 5.1 or 6.1 Surround mode is selected, this control is used to set the

surround LFE Channel level. It appears when the PAN CONTROL in the

Master Window is set to “SURR.” To set the Channel level, drag the end of

its bar or click a point along the length of the bar.

V [AUTO] button

This button displays the Automix status of the Input Channel.

W [SELECT] button

This button is used to select the Input Channel.

X [SOLO] button

This button solos the Input Channel. It appears orange while the channel is soloed.

Y [ON] button

This button turns the Input Channel on and off. It appears orange while the channel

is on.

Z Short channel name

This is the channel’s short name. To edit the name, click it and type.

a Channel fader and channel meter

This is the Input Channel fader. The channel meter to the right of the fader displays

the Input Channel signal level.

b Fader value indicator

The fader value indicator indicates the fader position in decibels (dB).

Aux Send status Appearance

On or off but no level set Dark blue bar

Off, pre-fader Green bar outline displays level

On, pre-fader Green bar displays level

Off, post-fader Orange bar outline displays level

On, post-fader Orange bar displays level

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Output Channels

When you select the Master LAYER button in the Master window, the Bus Out and

Aux Send channels are displayed. The Aux Send channel appears the same as the Bus

Out channels except that the Bus Out channels feature a [STEREO] button.

A [STEREO] button (Bus Out only)

This button is used to route the Bus Out to the Stereo Out.

B [INSERT] button

This button is used to turn on and off the Bus Out’s Insert.

C [COMP] button

This button is used to turn on and off the Bus Out’s Compressor.

D Compressor curve

This display shows the Compressor’s curve.

E [EQ] button

This button is used to turn on and off the Bus Out’s EQ.

F EQ curve

This display shows the Equalizer’s curve, which can be set by dragging.

G [DELAY] button

This button is used to turn on and off the Bus Out’s Delay function.

H Delay parameter

This parameter is used to set the delay time of the Delay function. Delay times

can be set by dragging.

I Channel number

This is the channel number. Double-click the channel number to open the

Selected Channel window.

J [AUTO] button

This button displays the Automix status of the Bus Out.

K [SELECT] button

This button is used to select the Bus Out.

L [SOLO] button

This button solos the Bus Out. It appears orange while the Bus Out is soloed.

M [ON] button

This button turns the Bus Out on and off. It appears orange while the Bus Out is

on.

N Short channel name

This is the channel’s short name. To edit the name, click it and type.

O Channel fader and channel meter

This is the Bus Out fader. The meter to the right of the fader displays the Bus Out

signal level.

P Fader value indicator

The fader value indicator indicates the fader position in decibels (dB).

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Remote Channels

When you select the REMOTE LAYER button in the Master window, Remote Chan-

nels are displayed.

A Channel number

This is the channel number. Double-click the channel number to open the

Selected Channel window.

B [SELECT] button

This button is used to select the Remote Channel.

C [ON] button

This button turns the Remote Channel on and off. It appears orange while the

channel is on.

D Remote target name

This name indicates the remote target assigned on the 02R96.

E Channel fader

This is the Bus Out’s fader.

F Fader value indicator

This indicator indicates the fader position in the range of 0 through 127.

If the remote target is set to User Assignable Layer:

In this case, the assigned channels are displayed. For more information, refer to

“Input Channels” on page 10 and “Output Channels” on page 12. If the Group Mas-

ter Fader is assigned, only the [AUTO], [SOLO], and [ON] buttons and channel fad-

ers are displayed.

Note: When the remote target setting on the 02R96 is set to User Deﬁned, you can

use the [ON] buttons and channel faders to control the functions speciﬁed on the

Remote page.

Note: When the remote target setting on the 02R96 is set to User Deﬁned, you can

use the [ON] buttons and channel faders to control the functions speciﬁed on the

Remote page.

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Selected Channel Window

The Selected Channel window allows detailed editing of the currently selected channel. To open the

Selected Channel window, choose [Selected Channel] from the [Windows] menu.

There are ﬁve variations of the layout of the Selected Channel window, as follows:

•Input Channels (see below)

•Bus Outs (see page 16)

•Aux Sends (see page 17)

•Stereo Outs (see page 18)

•Remote Channels (see page 19)

Input Channels

A CHANNEL SELECT, INPUT PATCH & LIBRARY section

Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. To edit the name, click it and type. The INPUT PATCH parameter is used to select an input

source. To select an input, click the parameter and choose from the list that appears. The [LIBRARY]

button opens the Channel Library window.

B GATE section

This section contains the Gate controls and display graph for the currently selected Input Channel.

The rotary controls are used to set the threshold, range, attack, decay, and hold. The GR meter indi-

cates the amount of gain reduction being applied by the Gate. The [ON] button turns the Gate on and

off. The [LINK] button links the Gate of the currently selected Input Channel with the Gate of its part-

ner channel. The KEY IN parameter is used to select a Gate trigger source. The [LIBRARY] button

opens the Gate Library window.

Note: You can open multiple Selected Channel windows. The second and subsequent open

windows will indicate “Locked” in the title, which means that you cannot open Library

windows from these windows. In addition, these windows will not reﬂect the following

edits:

• Channel selections made in the Layer window (via the SELECT button)

•Edits in the Surround Editor window

AB DC E F

G H I

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

C EQUALIZER section

This section contains the EQ controls and display graph for the currently selected Input Channel. The

rotary controls are used to set the gain, center frequency, and Q of each band, and the pre-EQ attenuation

level. EQ can also be set by dragging the EQ curve on the EQUALIZER graph. The [ON] button turns the

EQ on and off. The TYPE buttons select the EQ type. The [LIBRARY] button opens the Equalizer Library

window.

D DELAY & PHASE section

This section contains the delay and phase controls for the currently selected Input Channel. The rotary

controls are used to set the delay time, feedback gain, and mix balance (wet/dry balance). The [ON]

button turns the Delay on and off. The [PHASE] button reverses the channel’s signal phase.

E ROUTING, PAN & level section

This section contains the routing, pan, and level controls and the [AUTO], [SOLO], and [ON] buttons

for the currently selected Input Channel. ROUTING buttons 1–8 are used to route the channel to the

Bus Outs. The [STEREO] button routes the channel to the Stereo Out. The [DIRECT] button routes

the channel to its Direct Out, and the Direct Out parameter below it selects a Direct Out destination.

The [F.PAN] button turns on and off the Bus Out Follow Pan function. The PAN control is used to

pan the channel. The [AUTO] button displays the Automix status. The [SOLO] button is used to solo

the channel, the [ON] button, to turn on and off the channel, and the channel fader, to set the channel

level. The meter to the right of the fader indicates the signal level, and the value indicator under the

fader indicates the fader position in decibels (dB).

F AUX SEND section

This section contains the Aux Send controls for the currently selected Input Channel. Use the rotary

controls to set the Aux Send levels, and click them to turn Aux Sends on and off. Use the button below

each Aux Send control to select pre-fader or post-fader. In Fixed mode, this button is used to turn Aux

Sends on and off (the level is ﬁxed at nominal).

When Aux Sends are paired, a heart icon is displayed between them, and the odd-numbered Aux Send

control sets the level, while the even-numbered control works as a pan control.

G INSERT section

This section contains the Insert parameters for the currently selected Input Channel. The [ON] button

turns the Insert on and off. The OUT and IN parameters are used to specify the insert out destination

and insert in source respectively. The POSITION parameter is used to specify the position of the Insert

in the signal path.

H COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Input

Channel. The rotary controls are used to set the threshold, ratio, attack, release, gain, and knee. The

GR meter indicates the amount of gain reduction being applied by the Compressor. The OUT meter

indicates its output level. The [ON] button turns the Compressor on and off. The [LINK] button links

the Compressor of the currently selected Input Channel with the Compressor of its partner channel.

The POSITION parameter is used to specify the position of the Compressor in the signal path. The

ORDER parameter is used to specify the order of the Compressor and Insert when both are inserted

at the same position. The [LIBRARY] button opens the Compressor Library window.

I PAIR, FADER GROUP & MUTE GROUP section

This section contains the Pair, Fader and Mute group functions for the currently selected

Input Channel. Click the heart icon to pair and unpair the channel with its partner channel.

Use the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE

GROUP buttons to add it to Mute groups.

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Bus Outs

A CHANNEL SELECT section

Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. The [LIBRARY] button opens the Channel Library window.

B EQUALIZER section

This section contains the EQ controls and display graph for the currently selected Bus Out. It’s layout

is identical to the EQUALIZER section for Input Channels. See “EQUALIZER section” on page 15 for

more information.

C DELAY section

This section contains the delay controls for the currently selected Bus Out. The rotary control is used

to set the delay time, and the [ON] button turns the Delay function on and off.

D TO STEREO & level section

This section contains the TO STEREO, pan and level controls and the [AUTO], [SOLO], and [ON] but-

tons for the currently selected Bus Out. The TO STEREO button routes the Bus Out to the Stereo Out,

and the rotary controls are used to set the Bus to Stereo send level and pan. The [AUTO] button displays

the Automix status. The [SOLO] button is used to solo the Bus Out, the [ON] button, to turn the Bus

Out on and off, and the channel fader, to set the Bus Out level. The meter to the right of the fader indi-

cates the signal level, and the value indicator under the fader indicates the fader position in dB.

E INSERT section

This section contains the Insert parameters for the currently selected Bus Out. The [ON] button turns

the Insert on and off. The OUT and IN parameters are used to select the insert out destination and

insert in source respectively. The POSITION parameter is used to specify the position of the Insert in

the signal path.

F COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Bus Out.

Its layout is identical to the COMPRESSOR section for Input Channels. See “COMPRESSOR section”

on page 15 for more information.

G PAIR, FADER GROUP & MUTE GROUP section

This section contains the Pair, Fader and Mute group functions for the currently selected

Bus Out. Click the heart icon to pair and unpair the channel with its partner channel. Use

the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE

GROUP buttons to add it to Mute groups.

ACB D

E F G

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Aux Sends

A CHANNEL SELECT section

Channels can be selected by clicking the Channel ID and choosing from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. The [LIBRARY] button opens the Channel Library window.

B EQUALIZER section

This section contains the EQ controls and display graph for the currently selected Aux Send. It’s layout

is identical to the EQUALIZER section for Input Channels. See “EQUALIZER section” on page 15 for

more information.

C DELAY section

This section contains the delay controls for the currently selected Aux Send. The rotary control is used

to set the delay time, and the [ON] button turns the Delay function on and off.

D Aux Send level section

This section contains the [AUTO], [SOLO], and [ON] buttons and the channel fader for the currently

selected Aux Send. The meter to the right of the fader indicates the signal level, and the value indicator

under the fader indicates the fader position in decibels (dB).

E INSERT section

This section contains the Insert parameters for the currently selected Aux Send. The [ON] button

turns the Insert on and off. The OUT and IN parameters are used to specify the insert out destination

and insert in source respectively. The POSITION parameter is used to specify the position of the Insert

in the signal path.

F COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Aux Send.

Its layout is identical to the COMPRESSOR section for Input Channels. See “COMPRESSOR section”

on page 15 for more information.

G PAIR, FADER GROUP & MUTE GROUP section

This section contains the Pair, Fader and Mute group functions for the currently selected

Aux Send. Click the heart icon to pair and unpair the channel with its partner channel. Use

the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE

GROUP buttons to add it to Mute groups.

ACB D

E F G

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Stereo Out

A CHANNEL SELECT section

Channels can be selected by clicking the Channel ID and choosing from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. The [LIBRARY] button opens the Channel Library window.

B EQUALIZER section

This section contains the EQ controls and display graph for the Stereo Out. It’s layout is identical to

the EQUALIZER section for Input Channels. See “EQUALIZER section” on page 15 for more infor-

mation.

C DELAY section

This section contains the delay controls for the Stereo Out. The rotary control is used to set the delay

time, and the [ON] button turns the Delay function on and off.

D Balance & level section

This section contains the balance control, [AUTO] and [ON], and channel fader for the Stereo Out.

The meter to the right of the fader indicates the signal level, and the value indicator under the fader

indicates the fader position in decibels (dB).

E INSERT section

This section contains the Insert parameters for the Stereo Out. The [ON] button turns the Insert on

and off. The OUT and IN parameters are used to specify the insert out destination and insert in source

respectively. The POSITION parameter is used to specify the position of the Insert in the signal path.

F COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Stereo Out.

Its layout is identical to the COMPRESSOR section for Input Channels except there is no [LINK] but-

ton. See “COMPRESSOR section” on page 15 for more information.

G FADER GROUP & MUTE GROUP section

This section contains the Fader and Mute group functions for the Stereo Out. Use the FADER GROUP

buttons to add the Stereo Out to Fader groups, and use the MUTE GROUP buttons to add it to Mute

groups.

ACB D

E F G

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

Remote Channels

If the remote target is set to User Assignable Layer, the assigned channels are displayed. For more infor-

mation, refer to “Input Channels” on page 10 and “Output Channels” on page 12. If the Group Master

Fader is assigned, only the [AUTO], [SOLO], and [ON] buttons and channel faders are displayed.

Library Window

The Library window enables you to control and manage Scenes and libraries. In addition, Scenes and

libraries can be saved to disk on your computer as Library ﬁles.

To open the Library window, choose [Library] from the [Windows] menu. The Library window con-

sists of 9 display pages. You can access each of these pages by clicking the tabs along the top of the win-

dow, or by following the action described below:

The layout of the Library window pages is the same regardless of which page is selected (the Scene

Memory library is shown below). The Library window consists of two panes. The pane on the left,

called the [FILE] section, displays the status of the currently open library ﬁle. The pane on the right,

called the [INTERNAL DATA] section, displays the status of the corresponding library in the console.

You can copy and sort the items in the list (memories) by dragging them between the panes. Within

the same pane, you can copy a memory by dropping it on top of another memory, and you can sort

memories by dropping a memory between two memories. Memory contents can be swapped by hold-

ing down the <Shift> key while dragging. In all cases, the contents of the destination memory are

overwritten. To edit a memory title, click the title, then type.

Library page Action

Channel Library

[LIBRARY] buttons on the Selected Channel window

Gate Library

Compressor Library

Equalizer Library

Input Patch Library

[LIBRARY] button on the Patch Editor window

Output Patch Library

Effect Library [LIBRARY] buttons on the Effect Editor window

B C D E

G H IL M

Using Studio Manager

Windows

Getting Started

Keyboard Shortcuts

Index

Studio Manager for V2 02R96 Editor—Owner’s Manual

Using SM Windows

A File name

This is the ﬁle name of the currently open Library ﬁle.

B [OPEN] button

This button is used to open Library ﬁles.

C [CLOSE] button

This button is used to close the currently open Library ﬁle.

D [SAVE] button

This button is used to save the currently open Library ﬁle.

E [SAVE AS] button

This button is used to save the currently open Library ﬁle with a different name.

F TITLE

This column displays the memory titles.

G PROTECT (only for Scene memories and Automix memories)

This column displays padlock icons for protected memories. It also displays an “ ” (read-only) icon

for preset data.

H INPUT PATCH LINK (only for Scene memories)

This column displays the input patch memory numbers linked to the Scene library. When you store

or recall a Scene memory, the linked Input Patch Library memory is stored or recalled at the same

time.

I OUTPUT PATCH LINK (only for Scene memories)

This column displays the Output Patch memory numbers linked to the Scene library. When you store

or recall a Scene memory, the linked Output Patch Library memory is stored or recalled at the same

time.

J [STORE] button

This button is used to store the contents of the library to the speciﬁed location.

K [RECALL] button

This button is used to recall the selected memory.

L [FILE] section

This section displays the contents of the currently open library ﬁle.

M [INTERNAL DATA] section

This section displays the console’s status of the currently selected library.

N [CLEAR] button

This button clears the selected memory from the list.

O [UNDO] button

This button undoes the last recall, store, copy, clear, sort or titling operation.

P [PROTECT] button (only for Scene memories and Automix memories)

This button is used to protect or unprotect the selected memory.

Note: Studio Manager may be unable to open some ﬁles stored in SmartMedia. In this case, copy those

ﬁles onto a hard disk, then try to open them in Studio Manager.

Note: You cannot store Automix memories during ofﬂine editing.

Note: You cannot recall Automix memories during ofﬂine editing.

Note: If the OFFLINE indicator is selected by the [ONLINE]/[OFFLINE] button in the Master window,

Studio Manager is not synchronizing with the console. Therefore, this section does not display the console’s

correct status.

Note: In the Library window, you can undo only the most recent operation. You cannot undo any oper-

ations performed prior to the most recent operation.

Strona jest ładowana ...

Yamaha R96V Instrukcja obsługi

Marka: Yamaha

Model: R96V

Kategoria: Korektory dźwięku

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

ściągnij PDF

raport

w innych językach

čeština: Yamaha R96V Návod k obsluze
español: Yamaha R96V El manual del propietario
italiano: Yamaha R96V Manuale del proprietario
Deutsch: Yamaha R96V Bedienungsanleitung
svenska: Yamaha R96V Bruksanvisning
português: Yamaha R96V Manual do proprietário
français: Yamaha R96V Le manuel du propriétaire
Türkçe: Yamaha R96V El kitabı
English: Yamaha R96V Owner's manual
dansk: Yamaha R96V Brugervejledning
русский: Yamaha R96V Инструкция по применению
suomi: Yamaha R96V Omistajan opas
Nederlands: Yamaha R96V de handleiding
română: Yamaha R96V Manualul proprietarului

Powiązane dokumenty

Inne dokumenty

BaByliss ELECTROLISS Instrukcja obsługi