Aeg-Electrolux F78002VI0P Instrukcja obsługi

Kategoria
Zmywarki
Typ
Instrukcja obsługi
FAVORIT 78002 VI
EN
DISHWASHER USER MANUAL
2
IT
LAVASTOVIGLIE ISTRUZIONI PER L’USO
24
PL ZMYWARKA INSTRUKCJA OBSŁUGI 47
FOR PERFECT RESULTS
Thank you for choosing this AEG product. We have
created it to give you impeccable performance for many
years, with innovative technologies that help make life
simpler – features you might not find on ordinary
appliances. Please spend a few minutes reading to get the
very best from it.
ACCESSORIES AND CONSUMABLES
In the AEG webshop, you’ll find everything you need to
keep all your AEG appliances looking spotless and
working perfectly. Along with a wide range of accessories
designed and built to the high quality standards you
would expect, from specialist cookware to cutlery baskets,
from bottle holders to delicate laundry bags…
Visit the webshop at:
www.aeg-electrolux.com/shop
2
CONTENTS
4 Safety information
7 Product description
8 Control panel
10 Use of the appliance
11 Setting the water softener
12 Use of dishwasher salt
13 Use of detergent and rinse aid
14 Multitab function
14 Loading cutlery and dishes
15 Washing programmes
17 Select and start a washing
programme
18 Care and cleaning
20 What to do if…
22 Technical data
23 Environment concerns
The following symbols are used in this user
manual:
Important information concerning your
personal safety and information on how to
avoid damaging the appliance.
General information and tips
Environmental information
Subject to change without notice
Contents
3
SAFETY INFORMATION
Before the installation and use, read this manual carefully:
For your safety and the safety of your property.
To help the environment.
For the correct operation of the appliance.
Always keep these instructions with the appliance also if you move or give it to a different
person.
The manufacturer is not responsible if an incorrect installation and use causes damage.
Children and vulnerable persons safety
Do not let persons, children included, with reduced physical sensory, reduced mental
functions or lack of experience and knowledge to use the appliance. They must have su-
pervision or instruction for the operation of the appliance by a person who is responsible
for their safety.
Keep all packaging away from children. There is the risk of suffocation or injury.
Keep all detergents in a safe area. Do not let the children touch the detergents.
Keep children and pets away from the appliance when the door is open.
General safety
Do not change the specifications of this appliance. There is the risk of injury and damage
to the appliance.
Obey the safety instructions from the detergent manufacturer to prevent burns to eyes,
mouth and throat.
Do not drink the water from the appliance. Particles of detergent can stay in your appli-
ance.
Do not keep the appliance door open without supervision. This to prevent injury and to
fall on an open door.
Do not sit or stand on the open door.
Use
The appliance is only for domestic use. Do not use the appliance for other uses to pre-
vent injury to persons and damage to property.
Only use the appliance to clean accessories that are applicable for dishwashers.
Do not put flammable products or items that are wet with flammable products in, near
or on the appliance. Risk of explosion or fire.
Put the knives and all items with sharp points in the cutlery basket with their points
down. If not, put in a horizontal position in the upper basket or in the knife basket. (Not
all models have the knife basket).
Use only specified products for dishwashers (detergent, salt, rinse aid).
Types of salt that are not specified for dishwashers can cause damage to the water soft-
ener.
Fill the appliance with salt before you start a washing programme. Remaining salt in the
appliance can cause corrosion or make a hole in the bottom of the appliance.
4 Safety information
Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher
cleaning agent, liquid detergent). This can cause damage to the appliance.
Make sure that the spray arms can move freely before you start a washing programme.
The appliance can release hot steam if you open the door while a washing programme
operates. There is a risk of skin burns.
Do not remove the dishes from the appliance until the washing programme is comple-
ted.
Care and cleaning
Before you clean the appliance, deactivate it and disconnect the mains plug from the
mains socket.
Do not use flammable products or products that can cause corrosion.
Do not use the appliance without the filters. Make sure that the installation of the filters
is correct. An incorrect installation causes unsatisfactory washing results and damage to
the appliance.
Do not use spray water or steam to clean the appliance. Risk of electrical shock and
damage to the appliance.
Installation
Make sure that the appliance is not damaged. Do not install or connect a damaged appli-
ance, contact the supplier.
Remove all packaging before you install and use the appliance.
Only a qualified person must do the electrical connection, the plumbing and the installa-
tion of the appliance. This to prevent the risks of structural damage or injury.
Make sure that the mains plug is disconnected from the mains socket during installation.
Do not drill into the sides of the appliance to prevent damage to hydraulic components
and electrical components.
Important! Obey the instructions in the template supplied with the appliance:
To install the appliance.
To assemble the door panel.
To connect to the water supply and drain.
Make sure that the appliance is installed below and adjacent to safe structures.
Frost precautions
Do not install the appliance where the temperature is less than 0 °C.
The manufacturer is not responsible for frost damage.
Water connection
Use new hoses to connect the appliance to the water supply. Do not use used hoses.
Do not connect the appliance to new pipes or pipes not used for a long time. Let the
water flow for some minutes, then connect the inlet hose.
Make sure not to squash or cause damage to the water hoses when you install the appli-
ance.
Make sure that the water couplings are tight to prevent a water leakage.
Safety information
5
The first time you use the appliance, make sure that the hoses do not have water leaks.
The water inlet hose has a safety valve and a double sheath with an inner mains cable.
There is pressure in the water inlet hose only when the water flows. If there is a leak in
the water inlet hose, the safety valve interrupts the flow of water.
Be careful when you connect the water inlet hose:
Do not put the water inlet hose or the safety valve in water.
If the water inlet hose or the safety valve are damaged, immediately disconnect the
mains plug from the mains socket.
Contact the service centre to replace the water inlet hose with safety valve.
WARNING!
Dangerous voltage.
Electrical connection
The appliance must be earthed.
Make sure that the electrical information on the rating plate agrees with the power sup-
ply.
Always use a correctly installed shockproof socket.
Do not use multiple plugs and extension cables. There is a risk of fire.
Do not replace or change the mains cable. Contact the service centre.
Make sure not to squash or cause damage to the mains plug and cable behind the appli-
ance.
Make sure that there is access to the mains plug after the installation.
Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
Service centre
Only a qualified person can repair or work on the appliance. Contact the service centre.
Use only original spare parts.
To discard the appliance
To prevent the risk of injury or damage:
Disconnect the mains plug from the mains socket.
Cut off the mains cable and discard it.
6 Safety information
Remove the door catch. This prevents children or pets to be closed in the appliance.
There is a risk of suffocation.
Discard the appliance at the local waste disposal centre.
WARNING!
The dishwasher detergents are dangerous and can cause corrosion !
If an accident occurs with these detergents, contact immediately a physician.
If the detergent gets into the mouth, contact immediately a physician.
If the detergent gets into the eyes, contact immediately a physician and clean the eyes
with water.
Keep dishwasher detergents in a safe area and out of children touch.
Do not keep the appliance door open when there is detergent in the detergent dispenser.
Fill the detergent dispenser only before you start a washing programme.
PRODUCT DESCRIPTION
2
3
4
5
6
7
1
8
9
10
1 Upper basket
2 Water hardness dial
3 Salt container
4 Detergent dispenser
5 Rinse aid dispenser
6 Rating plate
7 Filters
8 Lower spray arm
9 Upper spray arm
10 Top spray arm
Product description
7
Visual signal
When the washing programme starts, a red visual signal shows on the floor below the
appliance door. This red signal stays on until the washing programme is completed.
When the washing programme is completed , a green visual signal shows on the floor
below the appliance door.
When the appliance has a malfunction, a red visual signal flashes on the floor below the
appliance door.
If the appliance is installed in height, with a flush kitchen furniture door, the visual signal
does not show.
CONTROL PANEL
The controls are on the top on the control panel. To operate with the controls, keep the
appliance door ajar.
1
2
3
4
5
6
7 8
9
1 On/off button
2 Display
3 Delay button
4 Programme button (down)
5 Programme button (up)
6 Extra-Hygiene button
7 Multitab button
8 RESET button
9 Indicators
Indicators
Salt indicator. It comes on when it is necessary to fill the salt container.
1)
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispens-
er.
1)
End indicator. It comes on when the washing programme is completed.
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a
washing programme operates.
On/off button
Press this button to activate or deactivate the appliance.
8 Control panel
After ten minutes from the end of the washing programme, the AUTO OFF function auto-
matically deactivates the appliance. This helps to decrease energy consumption.
Display
The display shows:
The electronic adjustment of the level of the water softener
The activation and deactivation of the rinse aid dispenser (only with the multitab func-
tion on)
The number of the washing programme
The remaining time to the end of the washing programme
The end of a washing programme (the display shows a zero)
The time of the delay start
The alarm codes
The activation and deactivation of the acoustic signals.
Delay button
Press this button again and again to delay the start of the washing programme from 1 to
24 hours.
Programme buttons
Press one of these buttons again and again to set a washing programme. Each time you
press a button, the display shows a number that is related to a washing programme. Refer
to 'Washing programmes'.
Extra-Hygiene button
This function gives better results for the hygiene. During the rinsing phase, the temperature
stays at 70 °C for 10 to 14 minutes.
Press this button to activate the function. The related indicator comes on.
Multitab button
Press this button to activate or deactivate the multitab function. Refer to 'Multitab func-
tion'.
RESET button
Press this button to cancel:
A washing programme in operation
The countdown of the delay start.
Setting mode
The appliance must be in setting mode for these operations:
To set and start a washing programme.
To set and start a delay start.
To adjust electronically the level of the water softener.
To activate or deactivate the rinse aid dispenser (only with the multitab function on.
To deactivate or activate the acoustic signals.
Control panel
9
Activate the appliance. The appliance is in setting mode when:
The display shows two horizontal status bars.
Activate the appliance. The appliance is not in setting mode when:
The display shows the time of the washing programme or of the delay start.
It is necessary to cancel the programme or the delay start to go back to the setting
mode. Refer to 'Select and start a washing programme'.
Acoustic signals
You can hear the acoustic signals in these conditions:
The washing programme is completed.
The level of the water softener is adjusted electronically.
The appliance has a malfunction.
Factory setting: on.
Deactivating the acoustic signals
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold button (4) and button (5) at the same time until the indicators of but-
tons (3), (4) and (5) flash.
4. Release button (4) and button (5).
5. Press button (5),
The indicators of buttons (3) and (4) go off.
The indicator of button (5) continues to flash.
The display shows the setting of the acoustic signals.
The acoustic signals are on.
The acoustic signals are off.
6. Press button (5) to change the setting.
7. Deactivate the appliance to confirm.
To activate the acoustic signals again, do steps (1) through (7).
USE OF THE APPLIANCE
1. Be sure that the set level of the water softener agrees with the water hardness in your
area. If not, adjust the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appliance.
5. Set the correct washing programme for the type of load and soil.
6. Fill the detergent dispenser with the correct quantity of detergent.
7. Start the washing programme.
10 Use of the appliance
If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function
(refer to 'Multitab function').
SETTING THE WATER SOFTENER
The water softener removes minerals and salts from the water supply. These minerals and
salts can cause damage to the appliance.
Adjust the level of the water softener if this does not agree with the water hardness in your
area.
Contact your local water authority to know the water hardness in your area.
Water hardness
Water hardness ad-
justment
German degrees
(°dH)
French degrees
(TH°)
mmol/l Clarke de-
grees
manually elec-
tronical-
ly
51 - 70 91 - 125 9,1 - 12,5 64 - 88
2
1)
10
43 - 50 76 - 90 7,6 - 9,0 53 - 63
2
1)
9
37 - 42 65 - 75 6,5 - 7,5 46 - 52
2
1)
8
29 - 36 51 - 64 5,1 - 6,4 36 - 45
2
1)
7
23 - 28 40 - 50 4,0 - 5,0 28 - 35
2
1)
6
19 - 22 33 - 39 3,3 - 3,9 23 - 27
2
1)
5
1)
15 - 18 26 - 32 2,6 - 3,2 18 - 22 1 4
11 - 14 19 - 25 1,9 - 2,5 13 - 17 1 3
4 - 10 7 - 18 0,7 - 1,8 5 - 12 1 2
< 4 < 7 < 0,7 < 5
1
2)
1
2)
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener manually and electronically.
Manual adjustment
Turn the water hardness dial to the position 1 or 2
(refer to the table).
Setting the water softener 11
Electronic adjustment
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold buttons (4) and (5) at the same time until the indicators of buttons (3),
(4) and (5) flash.
4. Release buttons (4) and (5).
5. Press button (3),
The indicators of buttons (4) and (5) go off.
The indicator of button (3) continues to flash.
The acoustic signals sound.
The display shows the setting of the water softener (example:
and you hear five
acoustic signals = level 5).
6. Press button (3) again and again to change the setting.
7. Deactivate the appliance to confirm.
If the water softener is set electronically to the level 1, the salt indicator stays off.
USE OF DISHWASHER SALT
How to fill the salt container
1. Turn the cap counterclockwise and open
the salt container.
2. Fill the salt container with 1 litre of water
(only for the first time you fill with salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from the
salt container when you fill it with salt.
12 Use of dishwasher salt
USE OF DETERGENT AND RINSE AID
20
30
M
A
X
1
2
3
4
+
-
1
2
3
4
5
6
7
Use of detergent
To help the environment, do not use more than the correct quantity of detergent.
Obey the instructions on the detergent packaging.
How to fill the detergent dispenser:
1.
Press the release button
2
to open the lid
7
of the detergent dispenser.
2.
Put the detergent in the dispenser
1
.
3. If the washing programme has a prewash phase, put a small quantity of detergent on
the inner part of the appliance door.
4.
If you use the detergent tablets, put the tablet in the detergent dispenser
1
.
5. Close the detergent dispenser. Press the lid until it locks into position.
Use long washing programmes when you use the detergent tablets. These cannot fully dis-
solve with short washing programmes and can decrease the washing results.
Use of rinse aid
Rinse aid makes it possible to dry the dishes without streaks and stains.
The rinse aid dispenser automatically adds rinse aid during the last rinsing phase.
Do these steps to fill the rinse aid dispenser:
1.
Press the release button
6
to open the lid
5
of the rinse aid dispenser.
2.
Fill the rinse aid dispenser
3
with rinse aid. The mark 'max' shows the maximum level.
3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during
the washing programme.
4. Close the rinse aid dispenser. Press the lid until it locks into position.
Adjust the rinse aid dosage
Factory set: position 3.
Use of detergent and rinse aid
13
You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest
dosage).
Turn the rinse aid selector
4
to increase or decrease the dosage.
MULTITAB FUNCTION
The multitab function is for combi detergent tablets.
These tablets contain agents as detergent, rinse aid and dishwasher salt. Some types of tab-
lets can contain other agents.
Be sure that these tablets are applicable for the water hardness in your area (refer to the
instructions on the packaging of the products).
The multitab function deactivates the flow of rinse aid and salt.
The multitab function deactivates the indicators of salt and rinse aid.
The programme duration can increase if you use the multitab function.
Activate or deactivate the multitab function before the start of a washing programme. You
cannot activate or deactivate the function when a washing programme operates.
To activate the multitab function
Press the multitab button, the multitab indicator comes on. The function is activated.
When you activate the multitab function, it stays on until you deactivate it.
To deactivate the multitab function and use separately detergent, salt and rinse aid
1. Press the multitab button, the multitab indicator goes off. The function is deactivated.
2. Fill the salt container and the rinse aid dispenser.
3. Adjust the water hardness to the highest level.
4. Start a washing programme without dishes.
5. When the washing programme is completed, adjust the water softener to the water
hardness in your area.
6. Adjust the quantity of rinse aid.
LOADING CUTLERY AND DISHES
Refer to the leaflet 'Examples of ProClean loads'.
Hints and tips
Do not put in the appliance items that can absorb water (sponges, household cloths).
Remove the remaining food from the items.
Make soft the remaining burned food on the items.
Put hollow items (cups, glasses and pans) with the opening down.
Make sure that water does not collect in containers or in bowls.
Make sure that cutlery and dishes do not bond together.
Make sure that the glasses do not touch other glasses.
Put small items in the cutlery basket.
14 Multitab function
Mix the spoons with other cutlery to prevent them to bond together.
When you put the items in the baskets, make sure that the water can touch all surfaces.
Put light items in the upper basket. Make sure that the items do not move.
Water droplets can collect on plastic items and non-stick pans.
WASHING PROGRAMMES
Programme Type of soil Type of load Programme descrip-
tion
Extra-Hy-
giene func-
tion
1
1)
All Crockery, cutlery,
pots and pans
Prewash
Wash 45 °C or 70 °C
Rinses
Dry
Yes, with ef-
fect
2 Heavy soil Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
Yes, without
effect
3
2)
Normal soil Crockery and cutlery Prewash
Wash 50 °C
Rinses
Dry
Yes, without
effect
4
3)
Fresh soil Crockery and cutlery Wash 60 °C
Rinse
Yes, with ef-
fect
5
4)
Normal soil Crockery and cutlery Prewash
Wash 50 °C
Rinses
Dry
Yes, with ef-
fect
6 Light soil Crockery and cutlery Wash 55 °C
Rinses
Yes, with ef-
fect
7 Normal or light
soil
Delicate crockery and
glassware
Wash 45 °C
Rinses
Dry
Yes, without
effect
Washing programmes 15
Programme Type of soil Type of load Programme descrip-
tion
Extra-Hy-
giene func-
tion
8 Use this programme to quickly rinse the
dishes. This prevents the remaining food
to bond on the dishes and bad odours to
come out from the appliance.
Do not use detergent with this pro-
gramme.
Rinse Yes, without
effect
1) The appliance senses the type of soil and the quantity of items in the baskets. It automatically adjusts the
temperature and quantity of the water, the energy consumption and the programme time.
2) This is the most silent washing programme. The pump works at a very low speed to decrease the level of noise.
Because of the low speed, the programme time is long.
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
4) This is the standard programme for test institutes. With this programme you have the most efficient use of
water and energy consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test
information.
Consumption values
Programme Programme time (mi-
nute)
Energy (kWh) Water (litre)
1 90 - 160 0,9 - 1,7 8 - 15
2 140 - 160 1,5 - 1,6 13 - 14
3 200 - 220 1,1 - 1,2 9 - 11
4 30 0,9 9
5 160 - 170 0,9 - 1,0 9 - 11
6 50 - 60 1,0 - 1,2 10 - 11
7 65 - 75 0,8 - 0,9 11 - 12
8 14 0,1 4
16 Washing programmes
The water pressure and temperature, the variations of the mains supply and the quantity of
dishes can change the consumption values.
SELECT AND START A WASHING PROGRAMME
Starting the washing programme without delay start
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Set the washing programme.
The number related to the washing programme flashes in the display.
4. If necessary, set the extra-hygiene function.
5. Close the appliance door, the washing programme starts automatically.
Starting the washing programme with delay start
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Set the washing programme and, if necessary, set the function extra-hygiene.
4. Press the delay touchpad again and again until the display shows the time of the delay
start.
The time of the delay start flashes in the display.
The delay indicator is on.
5. Close the appliance door, the countdown starts automatically.
When the countdown is completed, the washing programme starts automatically.
The opening of the appliance door stops the countdown. When you close the door, the
countdown continues from the point of interruption.
Cancelling the delay start
If the appliance door is open, and the countdown has not started
1. Press the delay button again and again until the display shows the number of the
washing programme.
The number flashes in the display.
2. Close the appliance door, the washing programme starts automatically.
If the appliance door is closed, and the countdown operates
1. Open the appliance door.
2. Press the delay button again and again until the display shows the number of the
washing programme.
The number flashes for some seconds and then the time of the washing programme
shows in the display.
3. Close the appliance door, the washing programme starts automatically.
Select and start a washing programme
17
Interruption of a washing programme
Open the appliance door.
The washing programme stops.
Close the appliance door.
The washing programme continues from the point of interruption.
Cancelling the washing programme
If the washing programme has not started, you can change the selection.
To change the selection while the washing programme operates, it is necessary to cancel
the programme.
Press the RESET button until the display shows two horizontal status bars.
Make sure that there is detergent in the detergent dispenser before you start a new wash-
ing programme.
End of the washing programme
When the washing programme is completed, an intermittent acoustic signal sounds.
1. Open the appliance door.
The end indicator is on
The display shows a zero.
2. Deactivate the appliance.
3. For better drying results, keep the appliance door ajar for some minutes.
Remove the items from the baskets
Let the dishes become cold before you remove them from the appliance. Hot dishes can
be easily damaged.
First remove the items from the lower basket, then from the upper basket.
There can be water on the sides and on the door of the appliance. Stainless steel be-
comes cool more quickly than the dishes.
CARE AND CLEANING
To remove and clean the filters
Dirty filters decrease the washing results.
Although the maintenance is very low with these filters, make a check at intervals and if
necessary, clean them.
18 Care and cleaning
1. Turn the filter (A) counterclockwise and
remove it out from filter (B).
2. Filter (A) has two parts. To disassemble the
filter, pull them apart.
3. Fully clean the parts with water.
4. Put the two parts of the filter (A) together
and push. Make sure that they assemble
correctly in each other.
5. Remove the filter (B).
6. Fully clean the filter (B) with water.
7. Put the filter (B) to its initial position.
Make sure that it assembles correctly in
the two guides (C).
8. Put the filter (A) into position in filter (B).
Turn the filter (A) clockwise until it locks.
To clean the spray arms
Do not remove the spray arms.
If the holes in the spray arms become clogged, remove remaining parts of soil with a thin
pointed object.
To clean the external surfaces
Clean the external surfaces of the appliance and control panel with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive cleaning pads or solvents (acetone).
A
B
C
Care and cleaning 19
WHAT TO DO IF…
The start of the appliance does not occur or it stops during operation.
First try to find a solution to the problem (refer to the table). If not, contact the service
centre.
With some malfunctions, the display shows an alarm code:
- The appliance does not fill with water
- The appliance does not drain the water
- The anti-flood device is on.
WARNING!
Deactivate the appliance before you do the checks.
Malfunction Possible cause Possible solution
The appliance does not fill with
water.
The water tap is blocked or
there is limescale on it.
Clean the water tap.
The water pressure is too low. Contact your local water au-
thority.
The water tap is closed. Open the water tap.
The filter in the water inlet
hose is blocked.
Clean the filter.
The connection of the water
inlet hose is not correct.
Make sure that the connection
is correct.
The water inlet hose is dam-
aged.
Make sure that the water inlet
hose has no damages.
The appliance does not drain
the water.
There is a blockage in the sink
spigot.
Clean the sink spigot.
The connection of the water
drain hose is not correct.
Make sure that the connection
is correct.
The water drain hose is dam-
aged.
Make sure that the water drain
hose has no damages.
The anti-flood device is on. Close the water tap and con-
tact the service centre.
The start of the washing pro-
gramme does not occur.
The appliance door is open. Close the appliance door.
The mains plug is not connec-
ted in the mains socket.
Connect the mains plug.
The fuse in the fuse box is
damaged.
Replace the fuse.
20 What to do if…
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Aeg-Electrolux F78002VI0P Instrukcja obsługi

Kategoria
Zmywarki
Typ
Instrukcja obsługi