DeskHaus 1.75 Inch Select Solid Wood Instrukcja obsługi
- Typ
- Instrukcja obsługi
SOLID WOOD TOP INFORMATION
SOLID WOOD TOPS
WWW.DESK.HAUS
INFORMATION SHEET
Actual colors may vary slightly. Please call us with any questions about our desk surfaces.
White Oak
Maple Butcher Block
Walnut
Maple Butcher Block
White Oak
Walnut
SOLID WOOD TOPS
WWW.DESK.HAUS
INFORMATION SHEET
Disclaimer:
Solid wood has imperfections and irregularities that will vary from one top to the other, such as knots, small holes and
cracks. These are the things that give solid wood its character and uniqueness.
We fill the holes and cracks on the topside of the surface with epoxy to ensure that your work surface is smooth and
durable. However, we do not fill any knots, cracks or holes on the underside of the surface. This not only saves on
materials but keeps the wood in its most natural state.
Installation:
After delivery, please store the wood top in the room it will eventually be used in for 48-72 hours. Maintain airflow to
all sides. This will allow the top to acclimate to it's new environment.
It is good practice to use a smaller screw and a washer to attach the top. This allows for slight wood movement
across the grain.
Pre-drilling is necessary and will eliminate adding stress to the wood.
We discourage the use of rubber mats, glass, leather, or any type of blotter on the top. This limits airflow which
can cause delamination, warping and cracking.
Warranty Limitations:
At the reception of our product, it’s your responsibility to inspect the usable surface of the wooden top for defects in
material and workmanship. The surface will be deemed clear of any defects if no issues are revealed by your inspection
3 days after you received the table top. Afterward, any minor cracks or irregularities is deemed to be resulting from the
natural movement of the wood.
Please note that solid wood is subject to:
1) Variations in the wood grain.
2) A slight change of color over time.
3) Minor cracks and irregularities due to normal wood movement.
4) Slight bending, if the room temperature the surface is in is subject to variations of temperature and/or humidity.
5) Scratches if a sharp object is used on the surface of the table, without any protective intermediary surface.
* These situations are not covered by the warranty
-
1
-
2
-
3
