Yamaha PSR-E243 Instrukcja obsługi

Marka: Yamaha

Model: PSR-E243

Kategoria: Klawiatury MIDI

Typ: Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

DIGITAL KEYBOARD

Owner’s ManualOwner’s Manual

PSR-E243/YPT-240 Owner’s Manual

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter).

DO NOT connect this product to any power supply or adapter other

than one described in the manual, on the name plate, or specifically

recommended by Yamaha.

WARNING:

Do not place this product in a position where anyone could

walk on, trip over, or roll anything over power or connecting cords of any

kind. The use of an extension cord is not recommended! If you must use an

extension cord, the minimum wire size for a 25’ cord (or less ) is 18 AWG.

NOTE: The smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at

the time of printing. However, Yamaha reserves the right to change or

modify any of the specifications without notice or obligation to update

existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound levels

that could cause permanent hearing loss. DO NOT operate for long

periods of time at a high volume level or at a level that is uncomfort-

able. If you experience any hearing loss or ringing in the ears, you

should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be dealer

assembled or installed. Please make sure that benches are stable and

any optional fixtures (where applicable) are well secured BEFORE

using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are

not covered by the manufacturer’s warranty, and are therefore the

owners responsibility. Please study this manual carefully and consult

your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi-

ronmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In keep-

ing with both the letter and the spirit of the law, we want you to be

aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of bat-

tery is approximately five years. When replacement becomes neces-

sary, contact a qualified service representative to perform the

replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery being

charged.

When installing batteries, never mix old batteries with new ones, and

never mix different types of batteries. Batteries MUST be installed cor-

rectly. Mismatches or incorrect installation may result in overheating and

battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all bat-

teries away from children. Dispose of used batteries promptly and as

regulated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some rea-

son its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of prod-

ucts that contain lead, batteries, plastics, etc. If your dealer is unable

to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model

number, serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number, and the

date of purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reason-

able level of assurance that your use of this product in a residential

environment will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in

the users manual, may cause interference harmful to the operation

of other electronic devices. Compliance with FCC regulations does

not guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please con-

tact Yamaha Corporation of America, Electronic Service Division,

6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

PSR-E243/YPT-240 Owner’s Manual

OBSERVERA!

Apparaten kopplas inte ur växelströmskällan (nätet) så länge som den

ar ansluten till vägguttaget, även om själva apparaten har stängts av.

ADVARSEL: Netspændingen til dette apparat er IKKE afbrudt,

sålænge netledningen sidder i en stikkontakt, som er tændt — også

selvom der er slukket på apparatets afbryder.

VAROITUS: Laitteen toisiopiiriin kytketty käyttökytkin ei irroita koko

laitetta verkosta.

(standby)

Entsorgung leerer Batterien (nur innerhalb

Deutschlands)

Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte Batterien

oder Akkumulatoren dürfen nicht in den Hausmüll. Sie können bei

einer Sammelstelle für Altbatterien bzw. Sondermüll abgegeben

werden. Informieren Sie sich bei Ihrer Kommune.

(battery)

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park, Calif.

90620

Telephone : 714-522-9011

Type of Equipment : Digital Keyboard

Model Name : PSR-E243/YPT-240

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including

interference that may cause undesired operation.

See user manual instructions if interference to radio reception is

suspected.

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

(FCC DoC)

The model number, serial number, power requirements, etc., may be

found on or near the name plate, which is at the bottom of the unit.

You should note this serial number in the space provided below and

retain this manual as a permanent record of your purchase to aid

identification in the event of theft.

Model No.

Serial No.

(bottom_en_01)

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should

not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points, in accordance with

your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and prevent any potential negative effects on human

health and the environment which could otherwise arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service

or the point of sale where you purchased the items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the

correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical

involved.

(weee_battery_eu_en_01)

PSR-E243/YPT-240 Owner’s Manual

About the Manuals

In addition to this Owner’s Manual, the following Online materials (PDF files) are available.

MIDI Reference

Contains MIDI-related information, such as the MIDI Implementation Chart.

MIDI Basics (only in English, French, German and Spanish)

Contains basic explanations about what MIDI is and can do.

Computer-related Operations

Contains instructions about computer-related functions.

iPhone/iPad Connection Manual

Explains how to connect the instrument to smart devices, such iPhone, iPad, etc.

To obtain these manuals, access the Yamaha Downloads, enter “PSR-E243, for example” to the Model

Name box, then click [SEARCH].

Yamaha Downloads

http://download.yamaha.com/

Song Book (only in English, French, German and Spanish)

Contains music scores for the preset Songs (excluding the Demo Songs) of this instrument. After completing the user

registration at the website below, you can download this Song Book free of charge.

Yamaha Online Member

https://member.yamaha.com/myproduct/regist/

You will need the PRODUCT ID on the sheet (“Online Member Product Registration”) packaged with this

manual in order to fill out the User Registration form.

Included Accessories

• Owner’s Manual (this book)

• AC Power Adaptor

• Music Rest

• Online Member Product Registration

*1: May not be included depending on your particular locale. Check with your Yamaha dealer.

*2: The PRODUCT ID on the sheet will be needed when you fill out the User Registration form.

Formats and functions

GM System Level 1

“GM System Level 1” is an addition to the MIDI

standard which ensures that any GM-compatible

music data can be accurately played by any GM-

compatible tone generator, regardless of manufac-

turer. The GM mark is affixed to all software and

hardware products that support GM System

Level.

XGlite

As its name implies, “XGlite” is a simplified ver-

sion of Yamaha’s high-quality XG tone genera-

tion format. Naturally, you can play back any XG

song data using an XGlite tone generator. How-

ever, keep in mind that some songs may play back

differently compared to the original data, due to

the reduced set of control parameters and effects.

USB

USB is an abbreviation for Universal Serial

Bus. It is a serial interface for connecting a

computer with peripheral devices. It allows

“hot swapping” (connecting peripheral

devices while the power to the computer is

on).

PSR-E243/YPT-240 Owner’s Manual

About the Manuals................................................ 4

Included Accessories............................................ 4

Formats and functions .......................................... 4

Setting Up

Panel Controls and Terminals 8

Setting Up 10

Power Requirements .......................................... 10

Using the music rest ........................................... 11

Connecting Headphones or External Audio Equipment

.. 11

Connecting a Footswitch to the SUSTAIN jack .. 11

Turning the Power On/Off................................... 11

Auto Power Off Function .................................... 12

Selecting an EQ Setting for the Best Sound....... 12

Display Items and Basic Operations 13

Display Items ...................................................... 13

Basic Operations ................................................ 13

Reference

Playing a Variety of Instrument Voices 14

Selecting a Voice................................................ 14

Fun Sounds ........................................................ 14

Playing the “Grand Piano” .................................. 14

Using the Metronome ......................................... 15

Playing with enhanced, more spacious sound

(Ultra-Wide Stereo)........................................ 15

Applying Effects to the Sound ............................ 15

Playing Styles 16

Style Variations—Sections ................................. 17

Changing the Tempo.......................................... 17

Chord Types for Style Playback ......................... 18

Looking Up Chords Using the Chord Dictionary. 19

Playing Songs 20

Listening to a Demo Song .................................. 20

Selecting and Playing Back a Song.................... 20

BGM Playback.................................................... 20

Song Fast Forward, Fast Reverse, and Pause .. 21

Changing the Melody Voice................................ 21

A-B Repeat......................................................... 21

Turning Each Part On/Off................................... 22

Using the Song Lesson Feature 23

Three Types of Song Lesson..............................23

Practicing with Song Lesson ............................... 23

The Functions 24

Using with a Computer or iPad/iPhone 26

Connecting to a computer ...................................26

Connecting an iPad/iPhone.................................26

Backup and Initialization 26

Backup Parameters.............................................26

Initialization .........................................................26

Appendix

Troubleshooting.............................................27

Voice List ........................................................28

Drum Kit List ..................................................32

Song List......................................................... 35

Style List .........................................................36

Effect Type List ..............................................37

Specifications................................................. 38

Index................................................................ 39

Thank you for purchasing this Yamaha Digital Keyboard!

We recommend that you read this manual carefully so that you can fully take advantage of the advanced

and convenient functions of the instrument.

We also recommend that you keep this manual in a safe and handy place for future reference.

Contents

PSR-E243/YPT-240 Owner’s Manual

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

Please keep this manual in a safe and handy place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical

shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the

following:

• Do not place the power cord near heat sources such as heaters or radiators. Also,

do not excessively bend or otherwise damage the cord, or place heavy objects on

it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the specified adaptor (page 38) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as

water seeps into the instrument, turn off the power immediately and unplug the

power cord from the AC outlet. Then have the instrument inspected by qualified

Yamaha service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit. A burning item may fall

over and cause a fire.

• Follow the precautions below. Failure to do so might result in explosion, fire,

overheating or battery fluid leakage.

- Do not tamper with or disassemble batteries.

- Do not dispose of batteries in fire.

- Do not attempt to recharge batteries that are not designed to be charged.

- Keep the batteries separate from metallic objects such as necklaces, hairpins,

coins, and keys.

- Use the specified battery type (page 10) only.

- Use new batteries, all of which are the same type, same model, and made by

the same manufacturer.

- Always make sure all batteries are inserted in conformity with the +/- polarity

markings.

- When the batteries run out, or if the instrument is not to be used for a long

time, remove the batteries from the instrument.

- When using Ni-MH batteries, follow the instructions that came with the

batteries. Use only the specified charger device when charging.

• Keep batteries away from small children who might accidentally swallow them.

• If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid

should come in contact with your eyes, mouth, or skin, wash immediately with

water and consult a doctor. Battery fluid is corrosive and may possibly cause loss

of sight or chemical burns.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. (If you are using batteries,

remove all batteries from the instrument.) Then have the device inspected by

Yamaha service personnel.

- The power cord or plug becomes frayed or damaged.

- It emits unusual smells or smoke.

- Some object has been dropped into the instrument.

- There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage

to the instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold

the plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• Before moving the instrument, remove all connected cables, to prevent damage

to the cables or injury to anyone who might trip over them.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

Battery

If you notice any abnormality

Power supply/AC power adaptor

Location

DMI-5 1/2

PSR-E243/YPT-240 Owner’s Manual

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power

cord from the wall AC outlet.

• Use only the stand specified for the instrument. When attaching the stand or rack,

use the provided screws only. Failure to do so could cause damage to the internal

components or result in the instrument falling over.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the

desired listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel or

keyboard. This could cause physical injury to you or others, damage to the

instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing

loss. If you experience any hearing loss or ringing in the ears, consult a

physician.

Always turn the power off when the instrument is not in use.

Even when the [ ] (Standby/On) switch is in standby status, electricity is still flowing to the instrument at the minimum level.

When you are not using the instrument for a long time, make sure you unplug the power cord from the wall AC outlet.

Make sure to discard used batteries according to local regulations.

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the

notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio

may generate noise. When you use the instrument along with the application on your iPhone/iPad, we recommend that you set “Airplane Mode” to “ON”

on your iPhone/iPad in order to avoid noise caused by communication.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)

to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° –

40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

 Saving data

• Saved data may be lost due to malfunction or incorrect operation.

Information

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal

use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use

others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and

sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of

 About functions/data bundled with the instrument

• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.

 About this manual

• The illustrations and LCD screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your

instrument.

• iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-5 2/2

PSR-E243/YPT-240 Owner’s Manual

Panel Controls and Terminals

q [ ] (Standby/On) switch..................... page 11

w [MASTER VOLUME] control ................ page 11

e [DEMO] button......................................page 20

r [FUNCTION] button..............................page 24

t [METRONOME] button.........................page 15

y [TEMPO/TAP] button............................page 17

u LESSON PART

[L] button ..............................................page 23

[R] button..............................................page 23

i [1 LISTEN & LEARN] button................page 23

o [2 TIMING] button.................................page 23

!0 [3 WAITING] button..............................page 23

!1 [A-B REPEAT] button...........................page 21

!2 [REW] button........................................ page 21

!3 [FF] button ............................................ page 21

!4 [PAUSE] button ....................................page 21

!1 [ACMP ON/OFF] button ....................... page 16

!2 [INTRO/ENDING/rit.] button................. page 17

!3 [MAIN/AUTO FILL] button.................... page 17

!4 [SYNC START] button .......................... page 16

In the Song mode

In the Style mode

Setting Up

Keyboard

Since this keyboard does not have touch response, the level

of the sound does not change in response to your playing

strength. Therefore, your performance may not sound cor-

rectly as in the preset Songs.

The “Press & Hold” Symbol

Buttons having this indication can be used to call up

an alternate function when the relevant button is

pressed and held. Hold down this button until the

function is called up.

Song List

(page 35)

Voice List

(page 28)

Display

(page 13)

Front Panel

GrandPno

001

!1 !2 !3 !4 !5

@0 @1

C1 C2 C3 C4

PSR-E243/YPT-240 Owner’s Manual

Panel Controls and Terminals

!5 [START/STOP] button.......................... page 20

!6 [SONG] button ..................................... page 20

!7 [VOICE] button......................................page 14

!8 [STYLE] button .....................................page 16

!9 Number buttons [0]–[9], [+], [-]............page 13

@0 [PORTABLE GRAND] button ...............page 14

@1 [ULTRA-WIDE STEREO] button...........page 15

@2 [SOUND EFFECT] button.....................page 14

@3 Drum illustrations for the Drum Kit ....page 14

Each of these indicates the drum or percussion instrument

assigned to the corresponding key for “Standard Kit 1.”

@4 SUSTAIN jack........................................ page 11

@5 USB TO HOST terminal* ......................page 26

@6 PHONES/OUTPUT jack ........................ page 11

@7 DC IN jack .............................................page 10

* For connecting to a computer. For details, refer to “Computer-

related Operations” (page 4) on the website. When connecting,

use an AB type USB cable of less than 3 meters. USB 3.0 cables

cannot be used.

Style List

(page 36)

C5 C6

Rear Panel

@6 @7

PSR-E243/YPT-240 Owner’s Manual

Setting Up

Power Requirements

Although the instrument will run either from an

optional AC adaptor or batteries, Yamaha recom-

mends use of an AC adaptor whenever possible. An

AC adaptor is more environmentally friendly than bat-

teries and does not deplete resources.

Using an AC Power Adaptor

1 Make sure that the power of the instrument is off

(display is blank, except for notation staff).

2 Connect the AC adaptor to the power supply jack.

3 Plug the AC adaptor into an AC outlet.

Using Batteries

This instrument requires six “AA” size, Alkaline

(LR6)/Manganese (R6) batteries, or rechargeable

nickel-metal hydride batteries (rechargeable Ni-MH

batteries). The Alkaline batteries or rechargeable Ni-

MH batteries are recommended for this instrument,

since other types may result in poorer battery perfor-

mance.

 Installing the batteries

1 Make sure that the power of the instrument is off

(display is blank, except for notation staff).

2 Open the battery compartment cover located on the

instrument’s bottom panel.

3 Insert the six new batteries, being careful to follow

the polarity markings on the inside of the compart-

ment.

4 Replace the compartment cover, making sure that it

locks firmly in place.

When battery power becomes too low for proper oper-

ation, the volume may be reduced, the sound may be

distorted, and other problems may occur. When this

happens, make sure to replace all batteries with new

ones or already-recharged ones.

• Use the specified adaptor (page 38) only. Using the

wrong adaptor can result in damage to the instrument

or overheating.

• When setting up the product, make sure that the AC

outlet you are using is easily accessible. If some trou-

ble or malfunction occurs, immediately turn off the

power switch and disconnect the plug from the outlet.

Even when the power switch is turned off, electricity is

still flowing to the product at the minimum level. When

you are not using the product for a long time, make

sure to unplug the power cord from the wall AC outlet.

• When using Ni-MH batteries, follow the instructions that

came with the batteries. Use only the specified charger

device when charging.

WARNING

CAUTION

AC outlet

AC power

adaptor

WARNING

• Connecting or disconnecting the power adaptor with bat-

teries installed may turn the power off, resulting in loss of

data being recorded or transferred at the time.

• This instrument cannot charge the batteries. Use only the

specified charger device when charging.

• Power will be automatically drawn from the AC adaptor if an

AC adaptor is connected while batteries are installed in the

instrument.

NOTICE

NOTE

PSR-E243/YPT-240 Owner’s Manual

Setting Up

 Setting the battery type

After installing new batteries and turning the power

on, make sure to set the Battery Type appropriately

(rechargeable or not) via Function number 025 (page

25).

Using the music rest

Connecting Headphones or

External Audio Equipment

Any pair of stereo headphones with a 1/4” stereo

phone plug can be plugged in here for convenient

monitoring. The speakers are automatically shut off

when a plug is inserted into this jack.

The PHONES/OUTPUT jack also functions as an

external output. You can connect the PHONES/OUT-

PUT jack to a keyboard amplifier, stereo system,

mixer, tape recorder, or other line-level audio device

to send the instrument’s output signal to that device.

Connecting a Footswitch to the

SUSTAIN jack

You can produce a natural sustain as you play by

pressing an optional Footswitch plugged into the

[SUSTAIN] jack.

Turning the Power On/Off

Turn down the [MASTER VOLUME] control to

“MIN” then press the [ ] (Standby/On) switch to

turn on the power. While playing the keyboard, adjust

the [MASTER VOLUME] control. To turn off the

power, press the [ ] (Standby/On) switch again for

a second.

While playing the keyboard, use the [MASTER VOL-

UME]

control

to adjust the volume to an appropriate

level.

• Failure to set the Battery Type may shorten the amount of

the battery life. Make sure to set the Battery Type correctly.

• Do not use the instrument/device or headphones for a long

period of time at a high or uncomfortable volume level,

since this can cause permanent hearing loss. If you experi-

ence any hearing loss or ringing in the ears, consult a phy-

sician.

• Before connecting the instrument to other electronic com-

ponents, set all volume levels to the minimum, then turn

off the power for all components.

NOTICE

Insert the music rest

into the slots as shown.

CAUTION

• When the instrument’s sound is output to an external

device, first turn on the power to the instrument, then to

the external device. Reverse this order when you turn the

power off.

• Make sure that the footswitch plug is properly connected to

the SUSTAIN jack before turning on the power.

• Do not press the footswitch while turning the power on. Doing

this changes the recognized polarity of the footswitch, result-

ing in reversed footswitch operation.

• When using a power adaptor, even when the power is off, a

small amount of electricity is still being consumed by the

instrument. When you are not using the instrument for a

long time, make sure to unplug the AC power adaptor from

the wall AC outlet.

NOTICE

NOTE

CAUTION

PSR-E243/YPT-240 Owner’s Manual

Setting Up

Auto Power Off Function

To prevent unnecessary power consumption, this

instrument features an Auto Power Off function that

automatically turns the power off if the instrument is

not operated for a specified period of time. The

amount of time that will elapse before the power is

automatically turned off is set by default to 30 min-

utes.

 To disable the Auto Power Off func-

tion:

Turn off the power, then press the [ ] (Standby/On)

switch to turn on the power while holding down the

lowest key.



To set the time that elapses before Auto

Power Off is executed:

While holding down the [FUNCTION] button, press

the [+] or [-] button several times until “AutoOff”

(Function 024) appears then select the desired value.

Settings: OFF, 5, 10, 15, 30, 60, 120 (minutes)

Default value: 30 (minutes)

Selecting an EQ Setting for the

Best Sound

Several different master equalizer (EQ) settings give

you the best possible sound when listening through

different reproduction systems—the instrument’s

internal speakers, headphones, or an external speaker

system.

Hold down the [ULTRA-WIDE STEREO]

button for longer than a second to call

up “013 MasterEQ.”

“MasterEQ” is shown in the display for a few sec-

onds, and the current Master EQ type appears.

Use the [+] or [-] button to select the

desired Master EQ type.

Master EQ types

• Generally, the settings are maintained even when the power is

turned off. For details, see page 26.

• Depending on the instrument status, the power may not

turn off automatically, even after the elapse of the specified

period of time. Always turn off the power manually when

the instrument is not in use.

• When the instrument is not operated for a specified period

of time while connected to an external device such as an

amplifier, speaker or computer, make sure to follow the

instructions in the Owner’s Manual to turn off the power to

the instrument and the connected devices, in order to pro-

tect the devices from damage. If you do not want the

power to turn off automatically when a device is con-

nected, disable Auto Power Off.

NOTE

NOTICE

1 Speaker

Optimum for listening via the instru-

ment’s built-in speakers.

2 Headphone

Optimum for headphones, or for listen-

ing via external speakers.

3 Boost Features more powerful sound.

4 Piano Optimum for piano solo performance.

5Bright

Lowers the mid range for a brighter

sound.

6 Mild

Lowers the high range for a softer

sound.

013

MasterEQ

013

Speaker

Current Master

EQ type

Hold for longer

than a second.

PSR-E243/YPT-240 Owner’s Manual

Display Items and Basic Operations

Display Items

Basic Operations

Before operating the instrument, it may be helpful to familiarize yourself with the basic controls below that are

used to select items and change values.

 Number buttons

Use the Number buttons to directly enter an item or

value. For numbers that start with one or two zeroes,

the first zeroes can be omitted.

 [-] and [+] buttons

Press the [+] button briefly to increase the value by 1, or

press the [-] button briefly to decrease the value by 1.

Press and hold either button to continuously increase or

decrease the value in the corresponding direction.

GrandPno

001

003

These indicate the operating

condition of the instrument.

Song/Voice/Style

Normally this indicates the notes you

play. When the Song Lesson function

is used, this indicates the current

notes and chord of playback. When

the Dictionary function (page 19) is

used, this indicates the notes of the

chord you specify.

Notation

• Any notes occurring below or above

the staff are indicated by “8va.”

• For a few specific chords, not all notes

may be shown, due to space limita-

tions in the display.

NOTE

This area indicates the on/off status of

each function. Each indication is shown

when the corresponding function is

turned on.

Page 15

Page 16

Indicates that a Dual Voice

(No.122–131) is selected.

On/Off status

Indicates the chord which is played in the Auto

Accompaniment range (page 16) of the keyboard, or

specified via Song playback.

Normally indicates the current measure number of current Style or

Song. When the [FUNCTION] button (

page 24

) is in use, this indi-

cates the Function number.

Indicates notes currently being played. Indi-

cates the melody and chord notes of a Song

when the Song lesson function is in use.

Also indicates the notes of a chord—either when playing a chord or

when using the Dictionary function.

Chord

Measure or Function

Keyboard Display

003

025

Information related to the Song tracks is shown

here (page 22).

Lit: Track contains data

Unlit: Track is muted or contains no data

Indicates the current beat of playback.

Song Track status

Beat

Press number buttons

[0], [0], [3], or simply

press [3].

Example: Selecting Voice 003,

Bright Piano.

Press briefly to

increase.

Press briefly to

decrease.

PSR-E243/YPT-240 Owner’s Manual

Playing a Variety of Instrument Voices

In addition to piano, organ, and other “standard” keyboard instruments, this instru-

ment has a large range of voices that includes guitar, bass, strings, sax, trumpet,

drums and percussion, and even sound effects—giving you a wide variety of musical

sounds.

Press the [VOICE] button.

The Voice number and name will be shown.

Use the number buttons [0]–[9], [+], [-]

buttons to select the desired Voice.

Refer to the Voice List on page 28.

Play the keyboard.

Preset Voice Types

You’ll be able to play various sound effects from the

keyboard: barking, braying, yelling, and much more.

Press the [SOUND EFFECT] button.

Try out each key and enjoy the sounds. Don’t forget

the black keys! After trying out these sounds, press

the [PORTABLE GRAND] button to reset the instru-

ment Voice to the default setting of Voice “Grand

Piano1.”

For details on the sound effects assigned to each key,

refer to Drum Kit List (Voice No.152) on page 34.

When you want to reset various settings to default and

simply play a Piano sound, press the [PORTABLE

GRAND] button.

The Voice “Grand Piano” will automatically be

selected as the Voice.

Selecting a Voice

001–139 Instrument Voices (including sound effects).

140–152

(Drum Kit)

Various drum and percussion sounds are

assigned to individual keys, from which they

can be played. Details on the instruments and

key assignments of each Drum Kit can be

found in the Drum Kit List on page 32.

153–385 XGlite Voices

000

One Touch Setting (OTS)

The One Touch Setting feature automatically

selects the most suitable Voice when you

select a Style or Song. Simply select Voice

number “000” to activate this feature.

GrandPno

001

Voice n am e

The Voice shown here

becomes the Voice for

the instrument.

Voice number

Appears after the

[VOICE] button is

pressed.

Flute

065

Fun Sounds

Playing the “Grand Piano”

Reference

Playing a Variety of Instrument Voices

PSR-E243/YPT-240 Owner’s Manual

The instrument features a built-in metronome (a

device that keeps an accurate tempo), convenient for

practicing.

Press the [METRONOME] button to start

the metronome.

Press the [METRONOME] button again

to stop the metronome.

To change the tempo:

Press the [TEMPO/TAP] button to call up the Tempo

value, then use the number buttons [0]–[9], [+], [-].

Press the [+] and [-] buttons simultaneously to

instantly reset the value to the default tempo.

To set the Time Signature:

Press and hold the [METRONOME] button to call up

“TimeSig” (Functions 018; page 25), then use the

Number buttons.

To set the Metronome Volume:

This can be set via Function number 019 (page 25).

You can play the keyboard with a spacious, wider

sound effect that gives you the sensation of hearing

the sound outside of the speakers by turning on the

Ultra-Wide Stereo effect.

Press the [ULTRA-WIDE STEREO] but-

ton to turn it on.

The sound will expand around you—as if the

speaker position is outside of the instrument.

Press the [ULTRA-WIDE STEREO] but-

ton again to turn it off.

To select the Ultra-Wide Stereo type:

Press and hold the [ULTRA-WIDE STEREO] button

to call up “Wide” (Function 014; page 25), then use

the Number buttons.

This instrument can apply various Effects as listed

below to the instrument’s sound.

Reverb

Adds the ambience of a club or concert hall to the sound.

Although the best-suited Reverb type is called up by

selecting a Song or Style, you can select another one via

Function number 009 (

page 25

). You can also set the

Reverb depth via Function number 010 (

page 25

Chorus

Makes the Voice sound richer, warmer and more spa-

cious. Although the best-suited Chorus type is called

up by selecting a Song or Style, you can select another

one via Function number 011 (page 25).

Sustain

By turning on the Sustain parameter of Function num-

ber 012 (page 25), you can add a fixed sustain to the

keyboard Voices. Sustain can also be applied with the

optional footswitch (page 11).

Using the Metronome

Playing with enhanced, more spa-

cious sound (Ultra-Wide Stereo)

Tempo

090

Current Tempo value

GrandPno

001

Appears when Ultra-

Wide Stereo is on.

Applying Effects to the Sound

PSR-E243/YPT-240 Owner’s Manual

Playing Styles

This instrument includes the Auto Accompaniment feature that plays appropriate

“Styles” (rhythm + bass + chord accompaniment). You can select from a huge variety of

Styles covering a wide range of musical genres.

Press the [STYLE] button, then use the

number buttons [0]–[9], [+], [-] to select

the desired Style.

The Style List is provided on the front panel, or in

the Style List (page 36).

Press the [ACMP ON/OFF] button to turn

on the Auto Accompaniment.

With this operation, the area of the keyboard to the

left of the Split Point (54: F#2) becomes the “Auto

Accompaniment range” and is used only for spec-

ifying the chords.

The highest key for the Auto Accompaniment

range is referred to as the “Split Point,” which can

be changed from the default of F#2 via Function

number 005 (page 24).

Press the [SYNC START] button to turn

Synchro Start on.

Play a chord in the Auto Accompani-

ment range to start playback.

Play a melody with the right hand and chords with

the left hand.

For information about chords, refer to “Chord

Types for Style Playback” (page 18) or use the

Chord Dictionary function (page 19).

Press the [START/STOP] button to stop

playback.

You can add intro, ending and rhythm variations to

Style playback by using “Sections.” For details,

refer to page 17.

Adjusting the Style Volume

To adjust the volume balance between Style playback

and keyboard, you can adjust the Style Volume. This

can be set via Function number 001 (page 24).

8BtModrn

001

Style Name

Style Number

This icon appears when the [STYLE]

button is pressed.

LoveSong

018

This icon appears when auto-

matic accompaniment is on.

36 48

7260

Split Point ... default setting: 54 (F#2)

Auto

Accompaniment

range

To play back the rhythm part only

If you press the [START/STOP] button (without press-

ing the [ACMP ON/OFF] button in step 2), only the

rhythm part can be played back, and you can play a

melody performance using the entire keyboard range.

LoveSong

018

Flashes when sync start is on.

Split Point

• Since the Pianist category Styles (093–100) have no

rhythm parts, no sound will be produced if you start

rhythm-only playback.

NOTE

Playing Styles

PSR-E243/YPT-240 Owner’s Manual

Each Style consists of “Sections” that allow you to

vary the arrangement of the accompaniment to match

the song you are playing. These instructions cover a

typical example for using the Sections.

1–3

Same as Steps 1–3 in page 16.

Press the [MAIN/AUTO FILL] button to

select Main A or Main B.

Press the [INTRO/ENDING/rit.] button.

Now, you’re ready to start Style playback from the

Intro section.

Play a chord with your left hand to start

playback of the Intro.

For this example, play a C major chord (as shown

below). For information on how to enter chords,

refer to “Chord Types for Style Playback” on page

18.

After the Intro finishes, play the key-

board according to the progression of

the Song you are playing.

Play chords with your left hand while playing

melodies with your right hand, and press the

[MAIN/AUTO FILL] button as necessary. The

Section will change to Fill-in then Main A or B.

Press the [INTRO/ENDING/rit.] button.

The Section switches to the Ending. When the End-

ing is finished, Style playback stops automatically.

You can have the Ending gradually slow down

(ritardando) by pressing the [INTRO/ENDING/rit.]

button again while the Ending is playing back.

Press the [TEMPO/TAP] button to call up the Tempo

value, then use the [-] and [+] buttons to adjust the

Tempo value.

Press the [+] and [-] buttons simultaneously to reset

the value to the default tempo of the current Style or

Song.

Using the Tap function

While a Song or Style is playing back, press the

[TEMPO/TAP] button just twice at the desired tempo

to change the tempo. While Song or Style playback is

stopped, tap the [TEMPO/TAP] button several times

to start playback at the tapped tempo—four times for

a 4-beat Song or Style or three times for a 3-beat Song

or Style.

Style Variations—Sections

MAIN A

Current Section

INTRO≥A

Split Point

Accompani-

ment range

Changing the Tempo

FILL A≥B

ENDING

Tempo

090

Current Tempo value

Playing Styles

PSR-E243/YPT-240 Owner’s Manual

For users who are unfamiliar with chords, this chart conveniently shows how to play common chords in the Auto

Accompaniment range of the keyboard. Since there are many useful chords and many different ways to use them

musically, refer to commercially available chord books for further details.

 indicates the root note.

• Inversions can be used as well as in “root” position—with the following exceptions:

m7, m7

5, 6, m6, sus4, aug, dim7, 7

5, 6(9), sus2

• Inversion of the 7sus4 and m7(11) chords are not recognized if the notes are omitted.

• Sus2 chords are indicated by the root name only.

• When playing a chord which cannot be recognized by this instrument, nothing is shown on the display. In such a case, only the rhythm

and bass parts will be played.

Chord Types for Style Playback

Major Minor Seventh Minor Seventh Major Seventh

Easy Chords

This method lets you easily play chords in the accompaniment range of the keyboard using only one, two, or three

fingers.

For root “C”

To play a major chord

Press the root note ()

of the chord.

To play a minor chord

Press the root note

together with the nearest

black key to the left of it.

To play a seventh chord

Press the root note

together with the nearest

white key to the left of it.

To play a minor seventh chord

Press the root note together

with the nearest white and

black keys to the left of it (three

keys altogether).

Playing Styles

PSR-E243/YPT-240 Owner’s Manual

The Dictionary function is useful when you know the

name of a certain chord and want to quickly learn how

to play it.

Press and hold the [3 WAITING] button

for longer than a second to call up

“Dict.”

“Dict.” will appear in the display.

This operation will divide the entire keyboard into

the three ranges as illustrated below.

• The range to the right of “ROOT ”:

Lets you specify the Chord Root, but produces no

sound.

• The range between “CHORD TYPE ” and

“ROOT ”:

Lets you specify the Chord Type, but produces no

sound.

• The range to the left of “CHORD TYPE ”:

Lets you play and confirm the Chord specified in the

above two ranges.

As an example, learn how to play a GM7

(G major seventh) chord.

2-1.

Press the “G” key in the section to the right

of “ROOT ” so that the “G” is shown as

the root note.

2-2.

Press the key labeled “M7” in the section

between “CHORD TYPE ” and “ROOT.”

The notes you should play for the specified

chord (root note and chord type) are conve-

niently shown in the display, both as nota-

tion and in the keyboard diagram.

To call up possible inversions of the chord, press

the [+]/[-] buttons.

Following the notation and keyboard

diagram in the display, try playing a

chord in the range to the left of “CHORD

TYPE .”

When you’ve played the chord properly, a bell

sound signals your success and the chord name in

the display flashes.

Looking Up Chords Using the

Chord Dictionary

Dict.

Hold for longer

than a second.

Chord Type range Root range

Keyboard

playing range

• About major chords: Simple major chords are usually

indicated only by the root note. For example, “C” refers

to C major. However, when specifying major chords

here, make sure to select “M” (major) after pressing the

root note.

• These chords are not shown in the Chord Dictionary

function: 6(9), M7(9), M7(

11 ),

5, M7

5, M7aug,

m7(11), mM7(9), mM7

5, 7

5, sus2

Dict.

001

Dict.

001

Chord name (root and type)

Individual notes of chord

(keyboard)

Notation of

chord

NOTE

PSR-E243/YPT-240 Owner’s Manual

Playing Songs

You can simply enjoy listening to the internal Songs, or use them with just about any of

the functions, such as Lesson.

Press the [DEMO] button to play Songs in

sequence. Playback will repeat continuously,

starting again from the first Song (001).

To stop playback, press the [DEMO] button.

Press the [SONG] button, then use the

Number buttons to select the desired

Song.

Refer to the Song List (page 35).

Press the [START/STOP] button to start

playback.

To stop playback, press the [START/STOP] button

again.

To change the tempo:

Refer to page 17.

Adjusting the Song Volume

To adjust the volume balance between Song playback

and keyboard, you can adjust the Song Volume. This

can be set via Function number 002 (page 24).

With the default setting, pressing the [DEMO] button

will play back only three internal Demo Songs repeat-

edly. This setting can be changed so that, all internal

Songs automatically play back, letting you use the

instrument as a background music source.

Hold down the [DEMO] button for longer

than a second.

“DemoGrp” is shown in the display for a few sec-

onds, followed by the current repeat playback tar-

get.

Use the [+] or [-] button to select a play-

back group.

Press the [DEMO] button to start play-

back.

To stop playback, press the [DEMO] button again

or press the [START/STOP] button.

Random Song Playback

When the Demo Group (above) is set to “Preset,” the

playback order via the [DEMO] button can be

changed between numerical order and random order.

To do this, press the [FUNCTION] button several

times until “PlayMode” (Function 022; page 25) is

called up, then select “Normal” or “Random.”

Listening to a Demo Song

• You can select a song by using the [+] button after pressing

the [DEMO] button. The [-] button can be used to go back to

the beginning of the selected Song.

Selecting and Playing Back a

Song

NOTE

Mirliton

004

Song name

Song number

Appears after the [Song]

button is pressed.

BGM Playback

Demo Preset songs (001–003)

Preset All preset songs (001–102)

Hold for longer

than a second.

Strona się ładuje...

Yamaha PSR-E243 Instrukcja obsługi

Marka: Yamaha

Model: PSR-E243

Kategoria: Klawiatury MIDI

Typ: Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Pobierz PDF

raport

w innych językach

čeština: Yamaha PSR-E243 Návod k obsluze
español: Yamaha PSR-E243 El manual del propietario
italiano: Yamaha PSR-E243 Manuale del proprietario
Deutsch: Yamaha PSR-E243 Bedienungsanleitung
svenska: Yamaha PSR-E243 Bruksanvisning
português: Yamaha PSR-E243 Manual do proprietário
français: Yamaha PSR-E243 Le manuel du propriétaire
Türkçe: Yamaha PSR-E243 El kitabı
English: Yamaha PSR-E243 Owner's manual
dansk: Yamaha PSR-E243 Brugervejledning
русский: Yamaha PSR-E243 Инструкция по применению
suomi: Yamaha PSR-E243 Omistajan opas
Nederlands: Yamaha PSR-E243 de handleiding
română: Yamaha PSR-E243 Manualul proprietarului

Yamaha PSR-E243 Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Yamaha PSR-E243 Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty