Yamaha CLAVINOVA C L P - 3 8 Instrukcja obsługi

Marka: Yamaha

Model: CLAVINOVA C L P - 3 8

Kategoria: Pianina cyfrowe

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

CLP-156

CLP

156

Introduction

Thank you for choosing a Yamaha CLP-156 Clavinova. Your Clavinova is a fine musical instru-

ment that employs advanced Yamaha music technology. With the proper care, your Clavinova

will give you many years of musical pleasure.

● Stereo sampling of the acoustic piano voices offers unmatched realism and expressive power, while

the AWM (Advanced Wave Memory) tone generator system offers rich, realistic reproductions of all

other voices.

● Piano-like touch response — adjustable in 4 stages — provides extensive expressive control and out-

standing playability.

● Dual play mode allows 2 voices to be played simultaneously.

● Unique Clavinova Tone voice provides a fresh sound for new musical expression.

● Damper pedal includes natural resonance effect for the piano voices, simulating the string and sound-

board resonance of acoustic pianos.

● Metronome feature with variable tempo facilitates practice.

● 2-track digital recorder lets you record and play back anything you play on the keyboard.

● Internal 3.5" floppy disk drive provides extended Recorder capacity and Disklavier PianoSoft™ play-

back capability – one blank floppy disk for recording and one PianoSoft demonstration disk (excerpts

from the Disklavier PianoSoft disks) are provided.

● MIDI compatibility and a range of MIDI functions make the Clavinova useful in a range of advanced

MIDI music systems.

In order to make the most of your Clavinova’s performance potential and features, we urge you

to read this Owner’s Manual thoroughly, and keep it in a safe place for later reference.

Your Clavinova is a fine musical instrument, and deserves the most careful treatment.

Observe the following points and your Clavinova will sound and look great for many years.

Taking Care Of Your Clavinova

1. Never Tamper With the Internal Circuitry

Never open the case and touch or tamper with the internal

circuitry.

2. Turn Off After Use

Always turn the POWER switch OFF after use, and close the

key cover to protect the keyboard.

3. Clean Carefully

Clean the cabinet and keys of your Clavinova only with a

clean, slightly damp cloth. A neutral cleanser may be used if

desired. Never use abrasive cleansers, waxes, solvents or

chemical dust cloths since these can dull or damage the fin-

ish.

4. Avoid Vinyl

Never place any vinyl products on your Clavinova. Contact

with vinyl can cause irreversible damage to the finish.

5. Avoid Humidity & Heat

Install your Clavinova in a place that is away from direct sun-

light, excessive humidity or heat.

6. Handle With Care

Never apply excessive force to the controls, connectors or

other parts of your Clavinova, and avoid scratching or bump-

ing it with hard objects.

7. Name Plate Location

The CLP-156 name plate is located on the bottom panel.

8. Handling Floppy Disks

Yamaha Disklavier PianoSoft disk is write-protected, and

therefore cannot be used to save songs. To save Recorder

songs from the Recorder, a blank floppy disk should be

used (one blank disk is supplied with the Clavinova).

Taking Care of Your Floppy Disks

■ Do NOT eject the disk during recording or playback, or at

any time when the disk drive lamp is lit. Doing so may

damage both the disk and the FDD.

■ Do NOT turn the Clavinova on or off while the disk is in

the drive.

■ Always eject the disk before turning the Clavinova off.

■ When ejecting a floppy disk from the disk drive:

■ Never open or close the key cover while a disk is extend-

ing from the drive (i.e. in the ejected position). The key

cover may contact the disk, possibly damaging the disk or

even the disk drive.

■ Do not insert anything but floppy disks into the disk drive.

Other objects may cause damage to the disk drive or

floppy disk.

■ Use only double-sided double density (2DD) 3.5-inch

floppy disks with the Clavinova.

Write protect tab

open (locked —

write protected)

Write protect tab

closed (unlocked —

write enabled)

Precautions Regarding Floppy Disk Use

■ Never open the disk’s shutter. Dirt or dust on the Internal

magnetic surface will cause data errors.

■ Never leave disks near a speaker, TV, or other device that

emits a strong magnetic field.

■ Do not store disks in places exposed to direct sunlight or

sources of high temperature.

■ Do not place heavy objects such as books on top of a

disk.

■ Avoid getting the disks wet.

■ Be sure to store the disks in environmental conditions as

specified below:

• Storage temperature: 4

to 53

C (39

to 127

F).

• Storage humidity: 8 to 90% relative humidity.

• Store in an area free from dust, sand, smoke, etc.

■ Be sure to apply the disk label at the proper position.

When changing the label never cover the old label with a

new label; always remove the old label first.

Head Cleaning

The head of the disk drive unit will get dirty as you use it

eventually causing data errors. If this occurs, clean the head

with a 3.5 inch head cleaning disk (available from most

computer supply stores).

Data Backup

It is recommended that you copy your recorded songs to

another disk for backup (see page 25). If the original disk is

damaged or your song is deleted, the backup disk can be

used instead of the original.

Protecting Your Data (Write Protect Tab)

Disk drive lamp

• To eject a floppy disk, press the eject button slowly as far as it will

go. Then when the disk Is fully ejected, remove it by hand.

• The disk may not be ejected properly if the eject button is pressed

too quickly or if it is not pressed in far enough. (The eject button

may become stuck halfway with the disk extending from the slot

by only a few millimeters). If this is the case, do not attempt to pull

out the partially ejected disk. Doing so may damage the disk drive

mechanism and/or the floppy disk. To remove a partially ejected

disk, try pressing the eject button once again or push the disk

back into the slot, then repeat the eject procedure carefully.

Contents

The Control Panel............................................................4

Connections......................................................................6

Selecting & Playing Voices ...........................................7

■ Playing the Demonstration Tunes................................8

The Dual Mode..................................................................9

● Adjusting the Balance Between the Dual-mode

Voices......................................................................9

● Shifting a Dual-mode Voice Up One Octave ...........9

● Slow-attack Strings..................................................9

● Memorizing the Balance, Strings Type, & Octave

Shift Settings .........................................................10

Brilliance ..........................................................................10

● Memorizing the Brilliance Setting ..........................10

Reverb...............................................................................11

● Adjusting Reverb Depth ........................................11

● Memorizing the Reverb Type & Depth Settings ....11

Touch Sensitivity ...........................................................12

● Memorizing the Touch Sensitivity Setting .............12

The Pedals .......................................................................12

● Soft (Left) Pedal ....................................................12

● Sostenuto (Center) Pedal ......................................12

● Damper (Right) Pedal............................................12

Transposition..................................................................13

Pitch Control ...................................................................14

● Tuning Up ..............................................................14

● Tuning Down .........................................................14

● To Restore Standard Pitch ....................................14

● The Pitch Display ..................................................14

● Memorizing the Pitch Control Setting ....................14

The Metronome & Tempo Control.............................15

■ The Metronome..........................................................15

● Metronome Volume ...............................................15

● Metronome Time Signature ...................................15

■ Tempo Control ...........................................................15

Disk Playback .................................................................16

● Adjusting the Playback Tempo ..............................17

● Fast Reverse and Forward ....................................17

● Playing Back only One Track ................................17

● Repeat Playback ...................................................17

● Playing Other Types of Music Data .......................17

Using the Recorder .......................................................18

■ Recording...................................................................18

● Changing the Initial Settings..................................19

● Erasing a Single Track ..........................................20

● If You Record Without First Inserting a Disk … ...20

■ Playback ....................................................................20

Utility Functions.............................................................21

■ Utility 1: Individual key Tuning ...................................21

● To Lower the Pitch of a Single Key .......................21

● To Raise the Pitch of a Single Key ........................21

●

To Turn the Individual Key Tune Mode OFF or ON...

■ Utility 2: Save Individual Key Tuning..........................23

■ Utility 3: Load Individual Key Tuning..........................23

■ Utility 4: Floppy Disk Format ......................................24

■ Utility 5: Song Copy ...................................................25

● Copying to a Different Disk....................................26

■ Utility 6: Song Delete .................................................26

● Deleting a Single Track .........................................26

■ Utility 7: Disk Playback Track Selection.....................27

● Selecting the Playback Track for CLP-156

Track 1/R or 2/L.....................................................27

■ Utility 8: Convert to SMF ............................................27

■ Utility 9: All-song Random Repeat .............................28

■ Utility 10: Standard MIDI File Voice Mode .................29

MIDI Functions ...............................................................30

● A Brief Introduction to MIDI ...................................30

● MIDI “Messages” Transmitted & Received by the

Clavinova...............................................................30

● MIDI Transmit & Receive Channel Selection ........31

● MIDI Transmit Transpose ......................................31

■ Other MIDI Functions.................................................32

● Local Control ON/OFF...........................................32

● Program Change ON/OFF ....................................32

● Control Change ON/OFF.......................................33

● The Multi-Timbre Mode .........................................33

● The MIDI Split & Left Local OFF Mode .................33

● The MIDI Split & Right Local OFF Mode ...............34

● Transmitting the Panel Settings ............................34

Factory Preset Recall ...................................................34

Error Messages ..............................................................35

Troubleshooting.............................................................35

Options .............................................................................35

Keyboard Stand Assembly .........................................36

MIDI Data Format ...........................................................38

MIDI Implementation Chart.............................................40

Specifications .................................................................41

The Control Panel

1 [POWER] Switch

Press the [POWER] switch once to turn the power ON,

a second time to turn the power OFF. When the power

is initially turned ON, the [PIANO 1] voice selector

LED will light, and the power indicator located below

the left end of the keyboard will light.

2 [MASTER VOLUME] Control

The [MASTER VOLUME] control adjusts the volume

(level) of sound produced by the Clavinova’s internal

stereo sound system. The [MASTER VOLUME] con-

trol also adjusts headphone volume when a pair of

headphones is plugged into the PHONES jack (page 6).

3 [BRILLIANCE] Button

This button can be used to change the tonality or “tim-

bre” of the selected voice. See page 10 for details.

4 [REVERB] Button

The [REVERB] button selects a number of digital

reverb effects that you can use for extra depth and ex-

pressive power. See page 11 for details.

● The Music Stand

If you will be using sheet music with your

Clavinova, raise the music stand built into its top

panel by lifting the rear edge of the music stand, then

flip down the music stand braces and engage them

with the corresponding recesses.

The music stand can be lowered after slightly lift-

ing it and folding the two brackets which support it

against the back of the stand.

Soft pedal

Sostenuto pedal Damper pedal

C1 D1 E1 F1 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 F3 G3 A3 B3 C4 D4 E4 F4 G4 A4

B0A0G0F0E0D0C0B-1A-1

POWER

PHONES Jacks

(Bottom Panel)

Left voice shift up key

(See page 9)

Pitch control keys

(See page 14)

Transpose keys

(See page 13)

Balance/Depth keys (See page 9, 11)

578032

MASTER VOLUME

MIN MAX

MIDI/

TRANSPOSE

REVERB

ROOM

HALL 1

HALL 2

COSMIC

PIANO 1

PIANO 2

CLAVINOVA

TONE

E. PIANO

HARPSI-

CHORD

BRILLIANCE

MELLOW

NORMAL

BRIGHT

STRINGS

VIBES

ORGAN

METRONOME

TEMPO

RECORDER

1/R

2/L

PLAY

REC DEMO

▲

▼

SONG

MASTER VOLUME

MIN MAX

MIDI/

TRANSPOSE

REVERB

ROOM

HALL 1

HALL 2

COSMIC

PIANO 1

PIANO 2

CLAVINOVA

TONE

E. PIANO

HARPSI-

CHORD

BRILLIANCE

MELLOW

NORMAL

BRIGHT

STRINGS

VIBES

ORGAN

METRONOME

TEMPO

▲

▼

SONG

120

5 [MIDI/TRANSPOSE] Button

The [MIDI/TRANSPOSE] button allows access to the

Clavinova’s TRANSPOSE function (to shift the pitch

of the entire keyboard up or down), keyboard touch

sensitivity adjustment, Utility functions (to enhance the

versatility and flexibility of the Clavinova), and MIDI

functions. For details refer to “Transposition” on page

13, “Touch Sensitivity” on page 12, “Utility Functions”

on page 21, and “MIDI Functions” on page 30.

6 Voice Selectors

The CLP-156 has eight voice selectors. Simply press

any of the voice selectors to select the corresponding

voice. The voice selector LED will light to indicate

which voice is currently selected.

The CLP-156 also has a DUAL mode in which two

voices can be played simultaneously across the full

range of the keyboard — see page 9 for details.

NOTE

• The PIANO 1 voice is automatically selected

whenever the [POWER] switch is initially turned

ON.

7 [METRONOME] Button

Turns the metronome sound on and off. The TEMPO

[s] and [t] buttons, below, are used to set the tempo

of the metronome sound — see page 15 for details.

8 TEMPO [t] and [s] Buttons

These buttons adjust the tempo of the CLP-156 metro-

nome function as well as the recording and playback

functions. The tempo range is from 32 to 280 quarter-

note beats per minute.

9 TEMPO Display

This 3-digit LED display normally shows the current

tempo in quarter-note beats per minute. When the met-

ronome, recording, or playback is in operation, it dis-

plays the current measure number. It also displays the

selected song number when a disk is in the disk drive,

and various parameters of functions while they are in

operation.

0 SONG [r] and [f] Buttons

Select a song number on a floppy disk for recording or

playback. See page 18 or16 for details.

! RECORDER [PLAY] and [REC] Buttons

These buttons control the CLP-156 2-track recorder,

letting you record and play back just about anything

you play on the keyboard — the music data that you

record is stored on a 3.5" floppy disk loaded into the

Clavinova’s disk drive unit. See page 18 for details.

@ RECORDER [1/R] and [2/L] Buttons

Select the track for recording or playback. See page 18

or 16 for details.

# [DEMO] Button

Activates the demo playback mode in which you can

select playback of different demonstration sequences

for each of the Clavinova’s voices. See page 8 for de-

tails.

$ 3.5" Floppy Disk Drive

A floppy disk for recording and playback is inserted

into the 3.5" floppy disk drive. See page 2 for precau-

tions about handling the floppy disk and the disk drive.

% Pedals

The CLP-156’s soft (left), sostenuto (center), and

damper (right) pedals provide a range of expressive

control capabilities similar to the pedal functions on an

acoustic piano. See page 12 for details.

B4 C5 D5 E5 F5 G5 A5 B5 C6

D6 E6 F6 G6 A6 B6 C7

Right voice shift up key

(See page 9)

Memory key

(See page 10, 11, 12, 14)

RECORDER

1/R

2/L

PLAY

REC DEMO

Connections

Two pairs of standard pair of stereo headphones can be plugged in here

for private practice or late-night playing. The internal speaker system is

automatically shut off when a pair of headphones is plugged into either of

the PHONES jacks.

● PHONES Jacks (Bottom Panel)

AUX IN

AUX OUT

R L/L+R

OUT

THRU

MIDI

312

These jacks are intended primarily for use with external synthesizers or

tone generator modules.

For example, the outputs of the synthesizer/tone generator can be to the

Clavinova AUX IN jacks, allowing the sound of the synthesizer/tone gen-

erator to be reproduced via the Clavinova’s internal amplifier and speaker

system.

NOTE

• The input signal from the AUX IN jacks is delivered to the AUX OUT

jacks, but is not affected by the Clavinova’s volume control or reverb

effect.

The AUX OUT L/L+R and R jacks deliver the output of the Clavinova

for connection to an instrument amplifier, mixing console, PA system, or

recording equipment. If you will be connecting the Clavinova to a monaural

sound system, use only the L/L+R jack. When a plug is inserted into the L/

L+R jack only, the left- and right-channel signals are combined and deliv-

ered via the L/L+R jack so you don’t lose any of the Clavinova’s sound.

The Internal Amplifier & Speaker System

The CLP-156 features a powerful stereo amplifier delivering 30 watts per channel,

driving a speaker system that puts out exceptionally rich sound with natural re-

sponse from powerful lows to shimmering highs. The speaker system features a

bass-reflex type enclosure with two 13-centimeter and two 5-centimeter speaker

units.

NOTE

• The AUX OUT jack signal must never be returned to the AUX IN jacks,

either directly or through external equipment.

The MIDI IN connector receives MIDI data from an external MIDI de-

vice (such as a synthesizer, sequencer, music computer, etc.) which can be

used to control the Clavinova. The MIDI THRU connector re-transmits any

data received at the MIDI IN connector, allowing “chaining” of several

MIDI instruments or other devices. The MIDI OUT connector transmits

MIDI data generated by the Clavinova (e.g. note and velocity data produced

by playing the Clavinova keyboard).

More details on MIDI are given in “MIDI Functions” on page 30.

1 AUX IN L and R Jacks

AUX IN

Tone

Generator

AUX OUT

L/L+RR

2 AUX OUT L/L+R and R Jacks

Stereo System

3 MIDI IN, THRU and OUT

Connectors

MIDI

IN OUT THRU

MIDI

Sequencer

Tone Generator

ZTurn Power On

After making sure that the Clavinova’s AC plug is properly inserted into

a convenient AC wall outlet, press the [POWER] switch located to the left

of the keyboard to turn the power ON.

When the power is turned ON, the [PIANO 1] voice selector LED will

light (the PIANO 1 voice is automatically selected whenever the power is

turned ON).

Initially set the [MASTER VOLUME] control about half way between

the “MIN” and “MAX” settings. Then, when you start playing, re-adjust the

[MASTER VOLUME] control for the most comfortable listening level.

Select the desired voice by pressing one of the voice selectors.

The Clavinova also offers keyboard touch response, so the volume and

timbre of notes played can be controlled according to how “hard” you play

the keys. The amount of variation available depends on the selected voice.

You can also change the overall tone or add reverb and/or effects as de-

sired by using the [REVERB] and [BRILLIANCE] buttons (see page 10

for [BRILLIANCE] button operation, “Reverb” on page 11).

XSet the Volume

CSelect a Voice

VPlay

BAdjust Tone & Add Effects

As Required

Selecting & Playing Voices

POWER

MASTER VOLUME

MIN MAX

REVERB

ROOM

HALL 1

HALL 2

COSMIC

BRILLIANCE

MELLOW

NORMAL

BRIGHT

PIANO 1

PIANO 2

CLAVINOVA

TONE

E. PIANO

HARPSI-

CHORD

STRINGS

VIBES

ORGAN

Playing the Demonstration Tunes

The CLP-156 features 8 demonstration tunes that effectively demonstrate its sound

capabilities. Here’s how you can select and play the demo tunes.

Press the [DEMO] button to engage the demo mode — the voice selec-

tors will flash in sequence.

The 8 demo tunes are selected via the voice selectors. Press a selector to

start playback of the corresponding tune, featuring the voice normally se-

lected by that voice selector button. The demo tunes will play in sequence

until stopped, starting with the selected tune. The voice selector indicator

will flash during demo playback.

Use the [MASTER VOLUME] control to adjust the volume.

NOTE

• The TEMPO buttons do not affect demo playback (“_ _ _” appears on

the TEMPO display).

You can start playback of any other demo tune during playback by sim-

ply pressing the corresponding voice selector. Playback will stop and the

playback-ready mode described in step 2, above, will be re-engaged if you

press the voice selector of the demo that is currently playing.

Press the [DEMO] button when you want to stop demo playback and

return to the normal play mode.

ZEngage the Demo Mode

Selecting & Playing Voices

Select a Demo Tune

DEMO

MASTER VOLUME

MIN MAX

VPlay a Different Demo

B Stop the Demo

CSet the Volume

PIANO 1

PIANO 2

CLAVINOVA

TONE

E. PIANO

HARPSI-

CHORD

STRINGS

VIBES

ORGAN

The Demo Tunes

[PIANO 1] button: Etude op. 10-5 “Black Keys” by F. F. Chopin

[PIANO 2] button: “Le Rhône” by K. Hattori

[CLAVINOVA TONE] button: “Pavane pour une infante défunte” by M. J. Ravel

[HARPSICHORD] button: “Le Coucou” by L. C. Daquin

[VIBES] button: “Schmetterling (Papilions)” op. 43 by E. H. Grieg

[STRINGS] button: “Charmaine” by L. Polladk

[ORGAN] button:

“Jesu, Joy Of Man’s Desiring” (Chorale from Cantata No. 147) by J. S. Bach

• The demonstration pieces listed above are short excerpts from the original compositions.

NOTE

• One PianoSoft demonstration disk is also provided with the CLP-156. It

contains several excerpts from the Disklavier PianoSoft disks. Refer to

the “Disk Playback” section on page 16 for how to playback the Demon-

stration disk.

Left voice

shift up.

Right voice

shift up.

E. PIANO

HARPSI-

CHORD

The Dual Mode

The DUAL mode makes it possible to play two voices simultaneously across the entire range of the key-

board. To activate the DUAL mode simply press two voice selectors at the same time (or press one voice

selector while holding another). The voice indicators of both selected voices will light when the DUAL mode

is active. To return to the normal single-voice play mode, press any single voice selector.

● Adjusting the Balance Be-

tween the Dual-mode Voices

The volume levels of the two voices combined in the DUAL mode are

normally set automatically to produce a pleasing balance (see “Default Set-

tings” below). The balance can be adjusted manually by using the C2

through C4 keys on the keyboard or the TEMPO [s] and [t] buttons

while pressing the two voice selectors corresponding to the voices to be

combined in the DUAL mode. The selected balance value (1 … 15) will be

shown on the TEMPO display until the voice selectors are released.

When using the keyboard, the C3 keys produces equal balance between

the two voices (a setting of “8”), while keys to the left of C3 increase the

volume of the left voice in relation to the right voice, and keys to the right

of C3 increase the volume of the right voice in relation to the left voice. By

“left” and “right” voices we refer to the relative positions of the voice selec-

tors — i.e. in a STRINGS/ORGAN combination STRINGS is the left voice

and ORGAN is the right voice.

When using the TEMPO buttons the first time either button is pressed

the current balance appears on the TEMPO display, then pressing the [t]

button increases the volume of the left voice in relation to the right while

the [s] button has the opposite effect. Press both the [s] and [t] buttons

simultaneously to instantly recall the equal-volume (“8”) setting.

■ A setting of “1” sets the volume of the left voice to maximum and the

volume of the right voice to minimum.

■ A setting of “8” sets both voices to the same volume.

■ A setting of “15” sets the volume of the right voice to maximum and the

volume of the left voice to minimum.

NOTE

• Hold either the TEMPO [

] or [

] button for continuous scrolling in the

specified direction.

Depending on which voices you combine using the DUAL mode, the

combination may sound better if one of the voices is shifted up an octave.

To shift the right voice, press the C5 key while pressing the two voice se-

lectors corresponding to the voices to be combined in the DUAL mode.

Press C5 again to shift the voice back to its normal range. Use the C1 key

in the same way to shift the left voice.

Default octave settings are provided for all voice combinations, as listed

in the “Default Settings” chart, below.

TEMPO

▲

▼

● Slow-attack Strings

In a DUAL mode voice combination using STRINGS and any other

voice, it is possible to switch the STRINGS voice to a slow-attack variation

when initially selecting the voices by pressing the [STRINGS] selector

twice while holding the other voice selector. Repeat this operation to return

to the normal STRINGS voice attack.

● Shifting a Dual-mode Voice

Up One Octave

Equal

balance.

Left voice

maximum.

Right voice

maximum.

INOVA

E. PIANO

HARPSI-

CHORD

PIANO 1

PIANO 2

CLA

STRINGS

ORGAN

The Dual Mode

● Memorizing the Balance,

Strings Type, & Octave Shift

Settings

Press the C7 key while holding any two voice selectors to memorize all

balance, STRINGS voice attack variation, and octave shift settings made

since the power was turned on. The memorized settings will be retained in

memory for about one week after the power is turned off, then the default

settings will be restored. To keep the memorized settings for longer periods,

turn the power on briefly at least once a week.

If these settings are not memorized as described above, they are retained

in memory only until the Clavinova is turned off.

The [BRILLIANCE] button makes it possible to change the tonality or “timbre” of the selected

voice to suit your musical requirements. Three settings are provided: MELLOW, NORMAL, and

BRIGHT. To select one of these settings, press the [BRILLIANCE] button a few times until the

indicator corresponding to the desired setting lights.

NORMAL .....This setting produces the “normal” tone of the selected voice.

BRIGHT .......This setting creates a brighter, sharper tone.

MELLOW.....The MELLOW setting produces a rounder, softer tone.

● Memorizing the Brilliance

Setting

Press the C7 key while holding the [BRILLIANCE] button to memorize

the current brilliance setting. The memorized setting will be retained in

memory for about one week after the power is turned off, then the default

setting (NORMAL) will be restored. To keep the memorized setting for

longer periods, turn the power on briefly at least once a week.

If this setting is not memorized as described above, it is retained in

memory only until the Clavinova is turned off.

BRILLIANCE

MELLOW

NORMAL

BRIGHT

Brilliance

E. PIANO

HARPSI-

CHORD

PIANO 1 PIANO 2

CLAVINOVA

E. PIANO

HARPSI- VIBES STRINGS

ORGAN

TONE

CHORD

PIANO 1 8 (C3) 8 (C3) 8 (C3) 8 (C3) 8 (C3) 4 (F2) 3 (E2)

PIANO 2 0 8 (C3) 8 (C3) 8 (C3) 8 (C3) 4 (F2) 3 (E2)

CLAVINOVA TONE

0 0 8 (C3) 8 (C3) 8 (C3) 4 (F2) 4 (F2)

E. PIANO 0 0 0

8 (C3) 8 (C3) 4 (F2) 3 (E2)

HARPSICHORD 0 0 0 0 8 (C3) 4 (F2) 5 (G2)

VIBES R R R R R 7 (B2) 7 (B2)

STRINGS 0 0 0 0 0 L 8 (C3)

ORGAN 0 0 0 0 0 L 0

Default Settings

Octave Shift

C2 … C4: Balance keys 0: Normal octave L: Left voice up one octave R: Right voice up one octave

Balance

Reverb

The [REVERB] button selects a number of digital reverb effects that you can use for

extra depth and expressive power.

To select a reverb type press the [REVERB] button a few times until the indicator

corresponding to the desired type lights (the indicators light in sequence each time the

[REVERB] button is pressed). No reverb is produced when all indicators are off.

OFF............When no reverb effect is selected (no REVERB indicator is lit), a special natural

damper effect is applied to the piano voices. This simulates the natural resonance of

an acoustic piano’s strings and sound board when the damper pedal is pressed.

ROOM........This setting add a continuous reverb effect to the sound that is similar to the type of

acoustic reverberation you would hear in a medium-size room.

HALL 1 ......For a “bigger” reverb sound, use the HALL 1 setting. This effect simulates the natu-

ral reverberation of a medium-size concert hall.

HALL 2 ......For a really spacious reverb sound, use the HALL 2 setting. This effect simulates the

natural reverberation of a large concert hall.

COSMIC ....The COSMIC reverb effect produces an echo-plus-reverb sound that can add life and

animation to your music.

Press the C7 key while holding the [REVERB] button to memorize the

current effect type and all depth settings made since the power was turned

on. The memorized settings will be retained in memory for about one week

after the power is turned off, then the default settings will be restored. To

keep the memorized settings for longer periods, turn the power on briefly at

least once a week.

If these settings are not memorized as described above, they are retained

in memory only until the Clavinova is turned off.

● Memorizing the Reverb

Type & Depth Settings

REVERB

ROOM

HALL 1

HALL 2

COSMIC

The depth of the selected reverb effect can be adjusted for the current

voice (separate settings can be made for each voice and reverb type) by

using the C2 through C4 keys on the keyboard or the TEMPO [s] and [t]

buttons while holding the [REVERB] button. The selected reverb depth

value (0 … 15) will be shown on the TEMPO display until the [REVERB]

button is released. The default reverb depth settings are given in the “De-

fault Settings” chart below.

When using the keyboard, the C3 keys sets the “normal” depth (a setting

of “8”). Keys to the left of C3 decrease the reverb depth, and keys to the

right of C3 increase the reverb depth.

When using the TEMPO buttons the first time either button is pressed

the current depth setting appears on the TEMPO display, then pressing the

[

s] button increases the reverb depth while the [

t] button decreases the

reverb depth. Press both the [s] and [t] buttons simultaneously to in-

stantly recall the normal (“8”) setting.

■ A setting of “0” sets the minimum reverb depth (no reverb).

■ A setting of “8” sets medium “normal” reverb depth.

■ A setting of “15” sets the maximum reverb depth.

NOTE

• Hold either the TEMPO [

] or [

] button for continuous scrolling in the

specified direction.

• A setting of “1” cannot be entered via the keyboard.

● Adjusting Reverb Depth

Normal

depth.

Decrease

depth.

Increase

depth.

REVERB

ROOM

HALL 1

HALL 2

COSMIC

0 2 3 4 5 6 7 8 9 10 11 12 13 14 15

TEMPO

▲

▼

ROOM HALL 1 HALL 2

COSMIC

STRINGS, ORGAN 8 (C3) 8 (C3) 11 (F3) 10 (E3)

Default Settings

* All effect types set to 8 (C3) for all other voices.

* The default reverb type is ROOM.

Touch Sensitivity

Four different types of keyboard touch sensitivity — HARD, MEDIUM, SOFT or FIXED —

can be selected to match different playing styles and preferences. The different touch sen-

sitivity settings are selected by using the [MIDI/TRANSPOSE] and [REVERB] buttons.

To select a touch sensitivity setting press the [REVERB] button a few times

while holding the [MIDI/TRANSPOSE] button until the indicator correspond-

ing to the desired setting lights.

MIDI/

TRANSPOSE

REVERB

ROOM

HALL 1

HALL 2

COSMIC

● Memorizing the Touch

Sensitivity Setting

Press the C7 key while holding the [MIDI/TRANSPOSE] and [REVERB]

button to memorize the current touch sensitivity setting. The memorized setting

will be retained in memory for about one week after the power is turned off,

then the default setting (MEDIUM) will be restored. To keep the memorized

setting for longer periods, turn the power on briefly at least once a week.

If this setting is not memorized as described above, it is retained in memory

only until the Clavinova is turned off.

Pressing the soft pedal reduces the volume and slightly changes the timbre of

notes played.

If you play a note or chord on the keyboard and press the sostenuto pedal while

the note(s) are held, those notes will be sustained as long as the pedal is held (as if

the damper pedal had been pressed) but all subsequently played notes will not be

sustained. This makes it possible to sustain a chord, for example, while other notes

are played “staccato.”

The damper pedal functions in the same way as a damper pedal on an acoustic

piano. When the damper pedal is pressed notes played have a long sustain. When

no REVERB effect is selected and a piano voice is selected, the damper pedal also

produces a special “resonance” that simulates the ring of the strings and the sound

board of an acoustic piano. Releasing the pedal immediately stops (damps) any

sustained notes. The CLP-156 damper pedal additionally features continuous

damping. This allows you to create shorter effects by pressing the damper pedal

down only part of the way.

The CLP-156 has three foot pedals that produce a range of expressive effects similar to

those produced by the pedals on an acoustic piano.

● Soft (Left) Pedal

The Pedals

● Sostenuto (Center) Pedal

● Damper (Right) Pedal

MIDI/

TRANSPOSE

REVERB

ROOM

HALL 1

HALL 2

COSMIC

HARD (ROOM indicator) ...........The HARD setting requires the keys to be played quite hard to produce maxi-

mum loudness.

MEDIUM (HALL 1 indicator)......The MEDIUM setting produces a fairly “standard” keyboard response. This is

the initial factory default setting.

SOFT (HALL 2 indicator) ...........The SOFT setting allows maximum loudness to be produced with relatively

light key pressure.

FIXED (No indicator lit)..............All notes are produced at the same volume no matter how hard the keyboard is

played. This is an ideal setting for voices which normally have no keyboard

sensitivity (i.e. harpsichord and organ).

The Clavinova’s TRANSPOSE function makes it possible to shift the pitch of the entire key-

board up or down in semitone intervals up to a maximum of six semitones. “Transposing” the

pitch of the Clavinova keyboard facilitates playing in difficult key signatures, and you can easily

match the pitch of the keyboard to the range of a singer or other instrumentalist.

Transposition

The [MIDI/TRANSPOSE] button and keys F#2 through F#3 on the keyboard, or the TEMPO [s] and [t] buttons, are

used for transposition.

ZPress and hold the [MIDI/TRANSPOSE] button. The current transpose

setting will appear on the TEMPO display (“-6” semitones through “0”

through “6” semitones).

XPress a key between F#2 and F#3 according to the desired amount of

transposition*, or use the TEMPO [s] and [t] buttons to set the re-

quired transposition value. The “0” default setting can be instantly re-

called by simultaneously pressing the TEMPO [s] and [t] buttons.

CRelease the [MIDI/TRANSPOSE] button.

* Pressing the C3 key produces normal keyboard pitch. Pressing the key to

the left of C3 (B2) transposes the pitch of the keyboard down a semitone,

the next key to the left (Bb2) transposes down a whole tone (two semi-

tones), etc., down to the F#2 key which transposes down 6 semitones.

Upward transposition is accomplished in the same way using the keys to

the right of C3, up to F#3 which transposes up 6 semitones.

NOTE

• Hold either the TEMPO [

] or [

] button for continuous scrolling in the

specified direction.

• Notes below and above the A-1 — C7 of the Clavinova sound one octave

higher and lower, respectively.

Normal

pitch.

Transpose

down.

Transpose

up.

MIDI/

TRANSPOSE

-5 -3 -1 0 +2 +4 +5

-6 -4 -2 +1

+3 +6

TEMPO

▲

▼

-1

Pitch control makes it possible to tune the Clavinova over a ±50-cent range (approximate) in ap-

proximately 1.2-cent or 1-hertz intervals. A hundred “cents” equals one semitone, so the tuning range

provided allows fine tuning of overall pitch over a range of approximately a semitone. Pitch control is

useful for tuning the Clavinova to match other instruments or recorded music.

-1

Pitch Control

TEMPO

▲

▼

● Tuning Up

Z To tune up (raise pitch), hold the A-1 and B-1 keys simultaneously

(A-1 and B-1 are the two lowest white keys on the keyboard) and press

any key between C3 and B3. Each time a key in this range is pressed the

pitch is raised by approximately 1.2 cents, up to a maximum of about 50

cents above standard pitch. To raise the pitch in 1-hertz increments press

the TEMPO [s] button instead of the C3-B3 keys. The TEMPO [t]

button can also be used to tune down while the A-1 and B-1 keys are held.

X Release the A-1 and B-1 keys.

Z To tune down (lower pitch), hold the A-1 and A#-1 keys simultane-

ously and press any key between C3 and B3. Each time a key in this range

is pressed the pitch is lowered by approximately 1.2 cents, up to a maxi-

mum of about 50 cents below standard pitch. To lower the pitch in 1-hertz

increments press the TEMPO [t] button instead of the C3-B3 keys. The

TEMPO [s] button can also be used to tune up while the A-1 and A#-1

keys are held.

XRelease the A-1 and A#-1 keys.

ZTo restore the default pitch (A3 = 440 Hz), hold the A-1, A#-1, and B-1

keys simultaneously and press any key between C3 and B3, or simultane-

ously press the TEMPO [s] and [t] buttons.

XRelease the A-1, A#-1 and B-1 keys.

NOTE

• Hold either the TEMPO [

] or [

] button for continuous scrolling in the

specified direction.

• The PITCH CONTROL function has no effect when LOCAL OFF is active

(see “MIDI FUNCTIONS,” page 32).

● The Pitch Display The approximate pitch of A3 is shown on the TEMPO display in Hertz

while the pitch control function is in operation. The total display range is from

approximately 427 hertz (-50 cents) to 453 hertz (+50 cents).

The dots to the right of each figure in the display are used to provide a

general idea of fractional pitches.

442 442.0 .........442.24

4.42 442.25 .......442.49

44.2 442.5 .........442.74

442. 442.75 .......442.99

Example:

Press the C7 key while holding the A-1/B-1, A-1/A#-1, or A-1/A#-1/B-1 key

combination to memorize the current pitch control setting. The memorized

setting will be retained in memory for about one week after the power is

turned off, then the standard pitch will be restored. To keep the memorized

setting for longer periods, turn the power on briefly at least once a week.

If this setting is not memorized as described above, it is retained in memory

only until the Clavinova is turned off.

● Memorizing the Pitch Con-

trol Setting

TEMPO

▲

▼

● Tuning Down

-1

● To Restore Standard Pitch

TEMPO

▲

▼

The Metronome & Tempo Control

The CLP-156 built-in metronome is a convenient feature for practice, and it can also provide

a solid rhythmic guide when recording using the Recorder feature, described below.

The metronome sound is turned on and off via the [METRONOME] button. Press the

[METRONOME] button so that its indicator lights to turn the metronome on and then

again so that the indicator goes out to turn the metronome off. When the metronome is on

the current measure number is shown on the TEMPO display.

NOTE

• The metronome will not function when the supplied PianoSoft demonstration disk or a

Disklavier PianoSoft disk is in the disk drive.

The volume of the metronome sound can be independently adjusted by using the

TEMPO [s] and [t] buttons while holding the [METRONOME] button. The first time

either button is pressed the current volume setting appears on the TEMPO display, then

pressing the [s] button increases the volume while the [t] button decreases the volume.

Press both the [s] and [t] buttons simultaneously to instantly recall the default (“8”)

setting.

■ A setting of “1” sets the minimum metronome volume.

■ A setting of “8” sets the default metronome volume.

■ A setting of “15” sets the maximum metronome volume.

NOTE

• Hold either the TEMPO [

] or [

] button for continuous scrolling in the specified direc-

tion.

The time signature of the metronome sound can be set by pressing the appropriate

voice selector button while holding the [METRONOME] button, as follows:

METRONOME

The Metronome

● Metronome Volume

METRONOME

TEMPO

▲

▼

● Metronome Time

Signature

Tempo Control

The tempo of the Metronome as well as the song recording and playback functions can be

adjusted from 32 to 280 quarter-note beats per minute via the TEMPO [s] and [t] but-

tons. The current tempo normally appears on the TEMPO display. Although the TEMPO

display shows the current measure number during Metronome, song recording or play-

back operation, the tempo value is displayed when either of the TEMPO buttons are

pressed, and remains on the display for about one second after the TEMPO buttons are

released. “_ _ _” is displayed for any tempo value during playback of the supplied

PianoSoft demonstration disk or optional Disklavier PianoSoft disks.

The default tempo of 120 beats per minute is automatically set when the power is ini-

tially turned on. Press the TEMPO [s] and [t] buttons simultaneously to instantly re-

call the default tempo (120) at any time. The tempo value of the selected song is recalled

if the TEMPO [s] and [t] buttons are pressed simultaneously when a song which con-

tains data is selected.

NOTE

• Hold either the TEMPO [

] or [

] button for continuous scrolling in the specified direc-

tion.

1.20

Beat Indicator

PIANO 1

PIANO 2

CLAVINOVA

TONE

E. PIANO

METRONOME

No accent/

4 time 2 time 3 time

1st Beat

2nd Beat

3rd Beat

4th Beat

[METRONOME] + [PIANO 1] No accent (default)

[METRONOME] + [PIANO 2] 2 time

[METRONOME] + [CLAVINOVA TONE] 3 time

[METRONOME] + [E. PIANO] 4 time

The dots on the TEMPO display flash to indicate the current beat within

the current measure, as shown to the left.

TEMPO

▲

▼

120

Disk Playback

Performance data on the supplied PianoSoft demonstration disk (others are available from Yamaha), as

well as original performances you record using the Clavinova’s Recorder function (page 18) can be played

back as described below.

Insert the disk containing the data to be played back into the disk

drive, with the sliding door facing the drive slot and the label side facing

upward. The disk should click into place and the disk lamp will light

briefly while the Clavinova reads and identifies the disk. Song number

“1” will also appear on the display.

NOTE

• Any recorded data in the CLP-156 memory (i.e. data recorded with-

out first inserting a disk) will be erased when:

(1)the supplied PianoSoft demonstration disk or an optional

PianoSoft disk is inserted.

(2)a disk containing original performance data is inserted and the

“Select a Song Number” operation, below, is carried out.

If you want to keep the data that is in the instrument’s memory, copy

it to a recordable disk as described on page 20 before doing any of

the above.

Use the SONG [r] and [f] buttons to select the song number you

want to play. Select “ALL” if you want all songs on the disk to be played

back in sequence. When the desired song number is selected the [1/R]

and [2/L] track button indicators will glow green if the corresponding

tracks contain performance data.

NOTE

• The songs can be made to play back and repeat either in sequence

or in random order when “ALL” is selected, depending on the setting

of the “All-song Random Repeat” function (page 28).

Start playback of the selected song by pressing the [PLAY] button.

Unless “ALL” is selected, the selected song will play through to the end

and playback will stop automatically. The current measure number will

be shown on the display during playback. It is also possible to play along

on the keyboard during playback.

NOTE

• The measure number display may not be accurate with some songs.

• It is possible to change the playback voice by using the panel voice

selectors during playback of the supplied PianoSoft demonstration

disk or an optional Disklavier PianoSoft disk. In this case the play-

back voice will become the same as the voice played via the key-

board. The playback voice cannot be changed when playing back

other types of disks (the keyboard voice can be changed).

Adjust the playback volume as required via the [MASTER VOL-

UME] control.

Although playback will stop automatically at the end of the song, it

can be stopped at any time by pressing the [PLAY] button.

When you’ve finished with the currently loaded disk, simply press the

disk drive EJECT button to remove it.

CAUTION

• NEVER eject a disk or turn the power off while the disk drive lamp is

on or a disk is playing back.

Z Insert a Disk

NEject the Disk When Done

X Select a Song Number

RECORDER

1/R

2/L

PLAY

REC

SONG

C Start Playback

RECORDER

1/R

2/L

PLAY

REC

V Adjust the Volume

BStop Playback

MASTER VOLUME

MIN MAX

PLAY

REC

Song Number

Measure Number

The playback tempo can be adjusted either before or during playback by

using the TEMPO [▲] and [▼] buttons. Press the TEMPO [▲] and [▼]

buttons simultaneously to recall the original tempo. The tempo value in

beats per minute will appear on the display during adjustment. “_ _ _” is

displayed for any tempo value during playback of the supplied PianoSoft

demonstration disk or optional Disklavier PianoSoft disks.

● Adjusting the Playback Tempo

● Repeat Playback

● Playing Other Types of

Music Data

As mentioned in step 2 of the playback procedure described above, you can

select “ALL” instead of an individual song number if you want to hear all the

songs on the disk played back in sequence. It is also possible to automatically play

all songs from the currently selected song repeatedly by pressing the [PLAY]

button while holding the [MIDI/TRANSPOSE] button. Press the [PLAY] button

to stop repeat playback at any time.

In addition to the supplied PianoSoft demonstration disk and disks containing

performances you record yourself using the CLP-156 recorder function, the

Clavinova can play back optional Yamaha Disklavier PianoSoft™ disks available

from your Yamaha dealer, and disks containing songs recorded in Standard MIDI

File format (format 0 only).

When playing Standard MIDI Files, approximate panel voices will automati-

cally be selected for the voices specified by the song data.

In most cases pre-recorded Standard MIDI File disks will include data for more

tracks than the two available on the CLP-156. Only track-1 and track-2 data will

be played by the CLP-156, while the data for other tracks will be transmitted via

the CLP-156 MIDI OUT terminal (see page 6). The data for tracks 1 and 2 will

not be transmitted via MIDI OUT. It is possible, however, to re-assign the data for

other tracks to playback via tracks 1 and 2 by using the “Disk Playback Track

Selection” function described on page 27. In this case the data for all tracks other

than those assigned to be played by the CLP-156 will be transmitted via the MIDI

OUT terminal.

122

TEMPO

▲

▼

During playback the SONG [r] and [f] buttons function as fast reverse and

forward controls:

■ Fast reverse: Press the SONG [r] button during playback to move back-

ward rapidly through the song. The current measure number

will appear on the display. No sound is produced during fast

reverse.

■ Fast forward: Press the SONG [f] button during playback to move rapidly

forward through the song. The current measure number will

appear on the display, and the fast-forward sound can be heard.

If both the [1/R] and [2/L] track button indicators light green, both tracks con-

tain data which will be played back. If you only want to play back one track, how-

ever, you can turn either track off by pressing its track button so the indicator goes

out. Press the same track button again so the indicator lights to turn the track back

on. Both tracks can be turned on or off either before or during playback in this

way.

SONG

● Playing Back only One

Track

RECORDER

1/R

2/L

● Fast Reverse and Forward

PLAY

REC

MIDI/

TRANSPOSE

Measure Number

Using the Recorder

The CLP-156 features a two-track recorder that lets you record what you play on the keyboard and then

play it back. Since you have two tracks, you can “overdub” one part on top of another, using a different

voice if you like, to create complex, rich-sounding recordings. The recorder feature is a useful adjunct to

any keyboard study program, since it lets you hear exactly how you sound from the listener’s perspective.

It can also be just plain fun.

Each individual recording made using this function is known as a “song”, and up to 60 songs can be

recorded on a single floppy disk (less if the recorded songs contain a large amount of data).

Recording

Insert a properly formatted disk into the disk drive, with the sliding

door facing the drive slot and the label side facing upward. The disk

should click into place and the disk lamp will light briefly while the

Clavinova reads and identifies the disk. Song number “1” will also ap-

pear on the display.

NOTE

• If an unformatted disk or a disk that was not formatted by the CLP-

156 is inserted, “For” will appear flashing on the display and recording

will not be possible. Be sure to format the disk using the “Floppy Disk

Format” function described on page 24 before recording.

Use the SONG [r] and [f] buttons to select the song number you

want to record to.

NOTE

• When a song number is selected the [1/R] and [2/L] track button

indicators will light green if the corresponding tracks already contain

performance data. If you record to a song number that contains data,

the old data will be erased and replaced by the newly-recorded data.

Select an “empty” song if you don’t want to erase the existing data.

Use the voice selectors to select the voice you want to record with. In

addition to the notes played, the CLP-156 also records the data listed in

the charts below. “Initial Value” refers to settings that can be made be-

fore actually beginning recording — e.g. selecting a voice or brilliance

type. “During Recording” refers to parameter changes that will be re-

corded while recording. The initial settings can be changed after record-

ing as described in “Changing the Initial Settings” on page 20.

Z Insert a Disk

● Data Recorded Independently for Each Track ● Data Common to Both Tracks

Data Initial Value During Recording

Reverb type Yes Yes

Reverb depth Yes Yes

Tempo Yes No

Data Initial Value During Recording

Notes played No Yes

Voice Yes Yes

Damper pedal Yes Yes

Soft pedal Yes Yes

Sostenuto pedal No Yes

Brilliance type Yes Yes

Dual voice Yes Yes

Dual balance Yes Yes

X Select a Song Number

RECORDER

1/R

2/L

PLAY

REC

SONG

Song Number

Select a Voice & Other Initial

Settings As Required

PIANO 1

PIANO 2

CLAVINOVA

TONE

E. PIANO

HARPSI-

CHORD

VIBE

Press the RECORDER [REC] button to engage the record ready mode (re-

cording does not actually start yet). The [REC] button indicator will light red.

When the [REC] button is released the amount of space available on the cur-

rently loaded floppy disk will be shown on the display in kilobytes (approxi-

mate). Also, a dot on the right side of the display will flash at the current tempo.

The record ready mode can be disengaged before recording by simply press-

ing the [REC] button again.

NOTE

• It is not possible to record to a song which contains data recorded on an in-

strument other than the CLP-156 — “no” will appear on the display when you

press the [REC] button.

When the record mode is engaged in the previous step, the last-recorded track

will automatically be selected for recording and its indicator — i.e. the [1/R] or

[2/L] button indicator — will glow red. If you want to record on a different

track, press the appropriate track button so that its indicator glows red.

NOTE

• The track button indicators of tracks which contain previously recorded data

will glow green. The previously-recorded data on the non-record track will

normally be played back as you record, so you can play along with a previ-

ously-recorded track. If you don’t want to hear the previously recorded track as

you record, press the playback track button before pressing the [REC] button

(step 4, above) so that its indicator goes out.

• Recording on a track which already contains data will erase all previous data

on that track.

If you want to use the metronome while recording, press the [METRO-

NOME] button and adjust the tempo and volume as described on page 15. The

metronome sound will not be recorded.

Recording will begin automatically as soon as you play a note on the key-

board or press the [PLAY] button. The current measure number will appear on

the display during recording.

NOTE

• You can record up to a maximum of about 57,000 notes on a single floppy

disk (approximately 700 kilobytes disk capacity), depending on pedal usage

and other factors. If the disk becomes full while recording, “FUL” will appear

on the display and recording will stop automatically.

Press either the [REC] or [PLAY] button to stop recording. “rEc” will appear

on the display while the data is being written to the floppy disk, then the indica-

tor of the recorded track will glow green to indicate that it now contains data,

and the display will revert to the normal song number display.

Engage the Record Ready

Mode

700

RECORDER

1/R

2/L

PLAY

REC

RECORDER

1/R

2/L

PLAY

REC

BSelect the Record Track

METRONOME

Start the Metronome,

If Required

M Start Recording

< Stop Recording

RECORDER

1/R

2/L

PLAY

REC

● Changing the Initial Settings

The initial settings (see the chart in step 3, above) recorded by the CLP-156

can be changed after the recording is finished by pressing the [REC] button to

engage the record ready mode, pressing the appropriate track button, making the

required changes, and then pressing the [REC] button again to exit from the

record ready mode and register the changes. If you do this, be careful not to

press the [PLAY] button or a key on the keyboard, either of which will start

recording and erase all previous recorded data on the selected track. If you start

this procedure but decide to cancel, simply select a different track then press the

[REC] button a second time.

All data can be erased from either of the recorder’s tracks by engaging the

record mode, selecting the track you want to erase, and then pressing the

[PLAY] button twice without recording any data.

If you forget to insert a properly formatted floppy disk before recording, it is

possible to record up to approximately 600 notes before the 8-kilobyte internal

memory becomes full. If you want to keep this data, it is possible to copy it to

disk by following the procedure outlined below.

CAUTION

• Any of the following operations will erase all data in the internal memory. Be

sure to copy the data in memory to disk before:

1: Turning the power switch OFF.

2: Loading a PianoSoft disk (including the supplied disk).

3: Inserting any disk and selecting a song number.

Z While holding the [MIDI/TRANSPOSE] button, press either the SONG

[r] and [f] button several times until “cPy” appears on the display.

Release the [MIDI/TRANSPOSE] button when “c_ _” appears on the

display.

X Use the TEMPO [▲] or [▼] button to select the song number to which

you want to copy the data.

C Insert the disk you want to copy the data to.

V Press the [PLAY] button. If no previous data exists in the specified song

number “cPy” will appear on the display and the data in the CLP-156

memory will be copied to the disk. If the specified song number already

contains data, “n y” will appear on the display. In this case press the

TEMPO [▲] button (yes) if you want to go ahead with the copy operation,

thereby erasing the previous data, or the TEMPO [▼] button (no) if you

want to cancel the copy operation and leave the existing data intact. In the

latter case repeat the procedure, selecting an empty song number.

Using the Recorder

TEMPO

▲

▼

PLAY

REC

SONG

MIDI/

TRANSPOSE

cpY c__

● Erasing a Single Track

● If You Record Without First

Inserting a Disk …

Playback

To play back what you’ve recorded, simply press the RECORDER [PLAY]

button. Playback starts from the beginning of the recorded data, and will stop

automatically at the end of the recorded data. You can also stop playback at

any time by pressing the [PLAY] button. To mute a track so that it doesn’t play

back, press the corresponding track button so that its indicator goes out.

Also refer to the “Disk Playback” section (page 16) for other playback func-

tions.

NOTE

• If the metronome is being used during playback, the metronome will stop

when playback is stopped.

• The playback data is not transmitted via the MIDI OUT terminal.

PLAY

REC

Strona jest ładowana ...

Yamaha CLAVINOVA C L P - 3 8 Instrukcja obsługi

Marka: Yamaha

Model: CLAVINOVA C L P - 3 8

Kategoria: Pianina cyfrowe

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

CLP-156

ściągnij PDF

raport

w innych językach

čeština: Yamaha CLAVINOVA C L P - 3 8 Návod k obsluze
español: Yamaha CLAVINOVA C L P - 3 8 El manual del propietario
italiano: Yamaha CLAVINOVA C L P - 3 8 Manuale del proprietario
Deutsch: Yamaha CLAVINOVA C L P - 3 8 Bedienungsanleitung
svenska: Yamaha CLAVINOVA C L P - 3 8 Bruksanvisning
português: Yamaha CLAVINOVA C L P - 3 8 Manual do proprietário
français: Yamaha CLAVINOVA C L P - 3 8 Le manuel du propriétaire
Türkçe: Yamaha CLAVINOVA C L P - 3 8 El kitabı
English: Yamaha CLAVINOVA C L P - 3 8 Owner's manual
dansk: Yamaha CLAVINOVA C L P - 3 8 Brugervejledning
русский: Yamaha CLAVINOVA C L P - 3 8 Инструкция по применению
suomi: Yamaha CLAVINOVA C L P - 3 8 Omistajan opas
Nederlands: Yamaha CLAVINOVA C L P - 3 8 de handleiding
română: Yamaha CLAVINOVA C L P - 3 8 Manualul proprietarului

Yamaha CLAVINOVA C L P - 3 8 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Yamaha CLAVINOVA C L P - 3 8 Instrukcja obsługi

w innych językach

Powiązane dokumenty