User Manual •Instrukcja Obsługi
• Please keep this User Manual for future
user, be sure that they also receive this
instruction booklet.
• Unpack and check carefully there is no
transportation damage before using the
• Before operating, ensure that the voltage
and frequency of power supply match the
• It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
• Disconnect main power before servicing
and maintenance.
•
but always by taking its base.
IMPORTANT!
Do not point strong light output from other fixtures
at the Mega FOAM Machine, as intense illumination
can damaged the equipment.
•
Don’t operate it where the temperature is
higher than this.
• In the event of serious operating problem,
carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare parts.
• Do not connect the device to any dimmer
pack.
• Do not touch any wire during operation and
there might be a hazard of electric shock.
• To prevent or reduce the risk of electrical
or moisture.
• The housing must be replaced if they are
visibly damaged.
• Do not look directly at the LED light spot
2. SAFETY INFORMATION
1. INTRODUCTION
MEGA FOAM MACHINE
Figure 2.
WARNING!