Biamp BPAK (Backpack Clip Kit) Instrukcja instalacji

A: 9300 Gemini Drive, Beaverton, OR 97008 W: biamp.com

Desono BPAK

Installation Guide

PRODUCT DESCRIPTION

The Desono BPAK Backpack Kit allows a Tesira AMP-450BP, AMP-450P,

TCM-X or TCM-XA to be attached to the top of a Desono C-IC6 or C-IC6LP

back can.

C-IC6 or C-IC6LP with Tesira unit

secured with backpack clips and

conduit cover

(shown with an AMP-450BP)

Tesira Unit

(AMP-450BP shown)

C-IC6

C-IC6LP

Kit Contents

Clips and M3 screws

(2 each)

Tesira CAT5 Jumper

cable (not shown)

Cover

A: 9300 Gemini Drive, Beaverton, OR 97008 W: biamp.com

INSTALLATION

3. A cover is provided for conduit usage or strain relief. Punch out the

cut-out, attach conduit tting or cable clamp and feed wiring through

the opening. Connect wiring per the device instructions. Insert cover

tabs into the slots on the Tesira unit and secure the cover with the

thumbscrew.

1. Attach clips. Installation method is the same for C-IC6LP.

2. Fully slide unit into clips

M3 Flat Head Screw

Backpack Clip

Use this hole for seismic

wire attachment or to

further prevent movement

on the back can

585.0111 25MAY2023

Pobierz PDF