Parkside PAEXS 20-Li A1 Instrukcja obsługi

CORDLESS ORBITAL SANDER / AKKU-EXZENTER-

SCHLEIFER / PONCEUSE EXCENTRIQUE SANS FIL

PAEXS 20-Li A1

PONCEUSE EXCENTRIQUE SANS FIL

Traduction des instructions d’origine

AKKU-EXZENTERSCHLEIFER

Originalbetriebsanleitung

CORDLESS ORBITAL SANDER

Translation of the original instructions

AKU EXCENTRICKÁ BRUSKA

Překlad originálního provozního návodu

ACCU-EXCENTERSCHUURMACHINE

Vertaling van de originele gebruiksaanwijzing

AKKU-EXZENTERSCHLEIFER

Preklad originálneho návodu na obsluhu

AKUMULATOROWA SZLIFIERKA

MIMOŚRODOWA

Tłumaczenie oryginalnej instrukcji obsługi

LIJADORA EXCÉNTRICA

RECARGABLE

Traducción del manual de instrucciones original

BATTERIDREVEN EXCENTERSLIBER

Oversættelse af den originale driftsvejledning

IAN 351737_2007

GB Translation of the original instructions Page 1

DE Originalbetriebsanleitung Seite 15

FR Traduction des instructions d’origine Page 29

NL Vertaling van de originele gebruiksaanwijzing Pagina 45

CZ Překlad originálního provozního návodu Strana 59

PL Tłumaczenie oryginalnej instrukcji obsługi Strona 73

SK Preklad originálneho návodu na obsluhu Strana 87

ES Traducción del manual de instrucciones original Página 101

DK Oversættelse af den originale driftsvejledning Side 115

Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of

the device.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen

Funktionen des Gerätes vertraut.

Avant de lire le mode d‘emploi, ouvrez la page contenant les illustrations et familiarisez-vous ensuite avec

toutes les fonctions de l‘appareil.

Vouw vóór het lezen de pagina met de afbeeldingen open en maak u vertrouwd met alle functies van het

apparaat.

Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z wszystkimi

funkcjami urządzenia.

Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.

Antes de empezar a leer abra la página que contiene las imágenes y, en seguida, familiarícese con todas

las funciones del dispositivo.

Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.

A

20V max.

18V

Alle Parkside Geräte und die Lade geräte PLG 20 A1/A4/PLG 20 A2/PLG20A3/

PDSLG 20 A1 der X20V Team Serie sind mit dem Akku-Pack PAP 20 A1/PAP 20 A2/

PAP20 A3/PAP 20 B1/PAP 20 B3 kompatibel.

All Parkside tools and the chargers PLG20A1/PLG20A2/PLG20A3/PDSLG 20 A1 of the

X20V Team series are compatible with the PAP20 A1/PAP20A2 / PAP 20 A3 /PAP 20 B1/

PAP 20 B3battery pack.

Tous les outils Parkside et les chargeurs PLG 20 A1/PLG20A2/PLG 20 A3/PDSLG 20 A1 de

la série X20V Team sont compatibles avec la batterie PAP 20 A1/PAP 20 A2/PAP 20 A3/

PAP 20 B1/PAP 20 B3.

Ladezeiten

Charging times

Temps de charge

Ladeströme

Charging currents

Courants de charge

2 Ah

Akku

Battery pack

Batterie

PAP 20 A1/B1

3 Ah

Akku

Battery pack

Batterie

PAP 20 A2

4 Ah

Akku

Battery pack

Batterie

PAP 20 A3/B3

max. 2,4 A

Ladegerät PLG 20 A1/A4

Charger

Chargeur

60 min

2,4 A

90 min

2,4 A

120 min

2,4 A

max. 3,5 A

Ladegerät PLG 20 A2

Charger

Chargeur

45 min

3,5 A

60 min

3,5 A

80 min

3,5 A

max. 4,5 A

Ladegerät PLG 20 A3

Charger

Chargeur

35 min

3,8 A

45 min

4,5 A

60 min

4,5 A

max. 4,5 A

Ladegerät PDSLG 20 A1

Charger

Chargeur

35 min

3,8 A

45 min

4,5 A

60 min

4,5 A

PAEXS 20-Li A1 GB│IE │ 1 ■

Contents

Introduction ............................................................ 2

Intended use ........................................................................2

Features ...........................................................................2

Package contents ....................................................................2

Technical speciﬁcations ...............................................................2

General power tool safety warnings .......................................3

1. Work area safety ..................................................................3

2. Electrical safety ...................................................................3

3. Personal safety ....................................................................4

4. Power tool use and care ............................................................4

5. Use and handling of the cordless electrical power tool .....................................5

6. Service ..........................................................................5

Safety guidelines for battery chargers ....................................................6

Appliance-speciﬁc safety instructions .....................................................6

Original accessories/auxiliary equipment .................................................7

Before use ............................................................. 7

Charging the battery pack (seeﬁg.A) ....................................................7

Attaching/disconnecting the battery pack to/from the appliance ...............................8

Checking the battery charge level .......................................................8

Selecting a sanding sheet ..............................................................8

Fitting the sanding sheet ...............................................................8

Dust extraction ......................................................................8

Dust box ..........................................................................9

Reducer ...........................................................................9

Use ...................................................................9

Adjusting the additional handle .........................................................9

Switching on and oﬀ .................................................................9

Setting the rotational speed ............................................................9

Working procedures ..................................................................9

Maintenance and cleaning ...............................................10

Kompernass Handels GmbH warranty ....................................10

Service ...............................................................12

Importer .............................................................12

Disposal ..............................................................12

Original Declaration of Conformity .......................................13

Ordering a replacement battery ..........................................14

Telephone ordering .................................................................14

PAEXS 20-Li A1

■ 2 │ GB│IE

CORDLESS ORBITAL SANDER

PAEXS 20-Li A1

Introduction

Congratulations on the purchase of your

new appliance. You have selected a high-

quality product. The operating instructions

are part of this product. They contain important

information about safety, usage and disposal.

Before using the product, please familiarise your-

self with all the operating and safety instructions.

Use the product only as described and for the

range of applications speciﬁed. Please also pass

these operating instructions on to any future owner.

Intended use

Depending on the sandpaper being used, this

appliance is suitable for the dry sanding of wood,

plastic, metal, ﬁller and also painted surfaces.

Any other usage or modiﬁcation of the appliance

is deemed to be improper and carries a signiﬁcant

risk of accidents. The manufacturer accepts no

responsibility for damage(s) resulting from

improper usage. This appliance is not intended for

commercial use.

Features

ON/OFF switch

Release button

Tab (dust box)

Dust box

Reducer for external extraction appliances

Adapter ﬁtting

Sanding sheet

Sanding plate

Screw

Additional handle

Speed setting wheel

Figure A

Battery display LED

Battery charge level button

Battery pack*

Quick charger*

Green control LED

Red control LED

Package contents

1 cordless Orbital Sander

4 random orbital sanding discs

(grain size 60/80/120/240)

1 dust box

1 reducer for external extraction appliances

1 set of operating instructions

Technical speciﬁcations

Cordless Orbital Sander PAEXS 20-Li A1

Rated voltage 20 V (DC)

Rated speed n0 3000–12000 rpm

Sanding sheet Ø 125mm

Battery PAP 20 A1*

Type LITHIUM-ION

Rated voltage 20 V (DC)

Capacity 2 Ah

Cells 5

High-speed battery charger PLG 20 A1*

INPUT

Rated voltage 230–240 V ∼, 50 Hz

(AC)

Rated power

consumption 65 W

Fuse (internal) 3.15 A T3.15A

OUTPUT

Rated voltage 21.5 V (DC)

Rated current 2.4 A

Charging time approx. 60 min

Protection class II / (double insulation)

* BATTERY AND CHARGER ARE NOT SUPPLIED

PAEXS 20-Li A1 GB│IE │ 3 ■

Noise and vibration data

Noise measurement value determined in

accordance with EN 62841. The A-rated noise

level of the power tool is typically as follows

Sound pressure level LPA = 82.3 dB (A)

Sound power level LWA = 93.3 dB (A)

Uncertainty K = 3 dB

Wear ear muﬀs!

Rated acceleration, typically

Main handle ah = 10.6 m/s2

Uncertainty K = 1.5 m/s2

Additional handle ah = 18.6 m/s2

Uncertainty K = 1.5 m/s2

NOTE

► The vibration emission values and the noise

emission values given in these instructions

have been measured in accordance with

a standardised test procedure and can be

used for comparison of the power tool with

another tool.

► The speciﬁed total vibration values and the

noise emission values can also be used to

make a provisional load estimate.

WARNING!

► Depending on the manner in which the

power tool is being used, and in particular

the kind of workpiece being worked, the

vibration and noise emission values can

deviate from the values given in these instruc-

tions during actual use of the power tool.

► Try to keep the vibration load as low as

possible. Measures to reduce the vibration

load are, e.g. wearing gloves and limiting

the working time. Wherein all states of oper-

ation must be included (e.g. times when the

power tool is switched oﬀ and times where

the power tool is switched on but running

without load).

General power tool

safety warnings

WARNING!

►Read all safety warnings, instructions, illus-

trations and speciﬁcations provided with

this power tool. Failure to follow all instruc-

tions listed below may result in electric shock,

ﬁre and/or serious injury.

Save all warnings and instructions for future

reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-

operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmos-

pheres, such as in the presence of ﬂammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed plugs

and matching outlets will reduce risk of electric

shock.

b) Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or

grounded.

PAEXS 20-Li A1

■ 4 │ GB│IE

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the power

tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled

cords increase the risk of electric shock.

e) When working outdoors with an electrical

power tool, always use extension cords that

are also suitable for use outdoors. Use of a

cord suitable for outdoor use reduces the risk of

electric shock.

f) If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

3. Personal safety

a) Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired

or under the inﬂuence of drugs, alcohol or

medication. A moment of inattention while

operating a power tool may result in serious

personal injury.

b) Use

personal protective equipment. Always

wear eye protection. Protective equipment such

as a dust mask, non-skid safety shoes, hard hat

or hearing protection used for appropriate condi-

tions will reduce personal injuries.

c) Prevent unintentional starting. Ensure the

switch is in the oﬀ-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your ﬁnger on the switch or energising

power tools that have the switch on invites

accidents.

d) Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key

left attached to a rotating part of the power tool

may result in personal injury.

e) Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

g) If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used.

Use of dust collection can reduce dust-related

hazards.

h) Do not allow yourself to get lulled into a false

sense of security and do not ignore the safety

rules for power tools, even if you are familiar

with the power tool after repeated use.

A careless action can cause severe injury within

a fraction of a second.

4. Power tool use and care

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at

the rate for which it was designed.

b) Do not use the power tool if the switch does

not turn it on and oﬀ. Any power tool that

cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power source

and/or remove the battery pack, if detachable,

from the power tool before making any

adjustments, changing accessories, or storing

power tools. Such preventive safety measures

reduce the risk of starting the power tool acci-

dentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

PAEXS 20-Li A1 GB│IE │ 5 ■

e) Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition

that may aﬀect the power tool’s operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting

edges are less likely to bind and are easier to

control.

g) Use the power tool, accessories and acces-

sory tools etc. in accordance with these

instructions, taking into account the working

conditions and the work to be performed.

Use of the power tool for operations diﬀerent

from those intended could result in a hazardous

situation.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow

for safe handling and control of the tool in un ex-

pected situations.

5. Use and handling of the cordless

electrical power tool

a) Charge a rechargeable battery using only

the charger recommended by the manufac-

turer. Chargers are often designed for a

particular type of rechargeable battery unit.

There is a risk of ﬁre if a battery charger speci-

ﬁed for a particular type of battery is used with

other batteries.

b) Only the rechargeable battery units supplied

are to be used with an electrical power tool.

The use of other rechargeable battery units may

lead to the danger of injury or ﬁre.

c) When they are not being used, store

rechargeable battery units away from paper-

clips, coins, keys, nails, screws or other small

metal objects that could cause the contacts to

be bridged. Short-circuiting the contacts of a

rechargeable battery unit may result in heat

damage or ﬁre.

d) Fluids may leak out of rechargeable battery

units if they are misused. If this happens,

avoid contact with the ﬂuid. If contact occurs,

ﬂush the aﬀected area with water. Seek addi-

tional medical help if any of the ﬂuid gets into

your eyes. Escaping battery ﬂuid may cause

skin irritation or burns.

e) Do not use damaged or modiﬁed batteries.

Damaged or modiﬁed batteries may behave

unexpectedly and cause ﬁres, explosions or

pose a risk of injury.

f) Do not expose a battery to ﬁre or excessively

high temperatures. Fire or temperatures in

excess of 130°C (265°F) can cause an ex plo-

sion.

g) Follow all instructions regarding charging

and never charge the battery or the cordless

tool outside of the temperature range given in

the operating instructions. Incorrect charging

or charging outside of the permissible tempera-

ture range can destroy the battery and increase

the risk of ﬁre.

CAUTION! RISK OF EXPLOSION!

Never charge non-rechargeable

batteries.

Protect the recharge-

able battery from heat (for example, from

continuous exposure to sunlight), ﬁre, water

and moisture. There is a risk of explosion.

6. Service

a) Have your power tool serviced by a qualiﬁed

repair person using only identical replace-

ment parts. This will ensure that the safety of

the power tool is maintained.

b) Never try to repair damaged batteries.

Batteries should only be maintained by the

manufacturer or an approved customer service

centre.

PAEXS 20-Li A1

■ 6 │ GB│IE

Safety guidelines for battery

chargers

■ This appliance may be used by

children aged 8 years and above

and by persons with limited physical,

sensory or mental capabilities or

lack of experience and knowledge,

provided that they are under super-

vision or have been told how to use

the appliance safely and are aware

of the potential risks. Do not allow

children to use the appliance as a

toy. Cleaning and user maintenance

tasks may not be carried out by

children unless they are supervised.

■ To avoid potential risks, damaged

mains cables should be replaced

by the manufacturer, their customer

service department or a similarly

qualiﬁed person.

The charger is suitable for indoor use only.

ATTENTION!

♦ This charger can only charge the following

batteries: PAP 20 A1/PAP 20 A2/

PAP20 A3/PAP 20 B1/PAP 20 B3.

♦ A current list of battery compatibility can be

found at www.Lidl.de/Akku.

WARNING!

■ Do not operate the charger with a damaged

cable, power cord or plug. Damaged power

cords can result in danger to life due to

electric shock.

Appliance-speciﬁc safety instructions

■ Secure the workpiece. A workpiece securely

held by a clamping device or vice is much safer

than one held in your hand.

■ Do not rest your hands next to or in front of the

appliance and the area being worked as there

is a risk of injury if you slip.

■RISK OF FIRE DUE TO FLYING SPARKS!

Sanding metal causes sparks to be produced.

Therefore, make sure that nobody is at risk and

that no combustible materials are located in the

immediate vicinity of where you are working.

WARNING! TOXIC VAPOURS!

► Working with the tool can produce harmful/

toxic dusts that represent a health hazard for

the person operating the appliance and for

any other people in the area.

WARNING!

RISKS DUE TO DUST!

► When working for extended periods of time

on wood and, in particular, materials that

produce dust that is hazardous to health,

connect the appliance to a suitable external

dust extraction appliance. Wear safety

goggles and a protective dust mask!

■ Provide suﬃcient ventilation when working on

plastics, paints, lacquers, etc.

■ Do not soak the materials or the area to be

processed with liquids containing solvents.

■ Never work on moistened materials or damp

surfaces.

PAEXS 20-Li A1 GB│IE │ 7 ■

■ Avoid sanding lead paint or other harmful

materials.

■ Materials containing asbestos must not be

processed. Asbestos is a known carcinogen.

■ Avoid contact with the sanding sheet while the

appliance is running.

■ Do not use the appliance without a sanding

sheet ﬁtted.

■ Never use the appliance for other purposes and

only use original parts/accessories. Using

attachments or accessory tools other than those

recommended in the operating instructions can

lead to a risk of injury.

■ Always allow the appliance to come to a

complete standstill before putting it down.

■ The appliance must always be kept clean,

dry and free from oil or grease.

Original accessories/auxiliary

equipment

■Use only the accessories and additional

equipment that are speciﬁed in the operating

instructions and are compatible with the

appliance.

WARNING!

■ Do not use any accessories that are not

recommended by PARKSIDE. This can lead to

an electric shock and ﬁre.

Before use

Charging the battery pack

(seeﬁg.A)

CAUTION!

► Always unplug the appliance before you

remove the battery pack from or connect

the battery pack to the high-speed charger .

NOTE

► Never charge the battery pack at an ambient

temperature of below 10°C or above 40°C.

If a lithium-ion battery is to be stored for an

extended period, the charge level should be

checked regularly. The optimum charge level

is between 50% and 80%. The storage

climate should be cool and dry and the

ambient temperature should be between 0°C

and 50°C.

♦ Plug the battery pack into the high-speed

charger (see ﬁg. A).

♦ Insert the power plug into the socket. The red

control LED lights up.

♦ The green LED indicates that the charging

process is complete and the battery pack is

ready.

ATTENTION!

♦ If the red control LED ﬂashes, this means

that the battery pack has overheated and

cannot be charged.

♦ If the red and green control LEDs both

ﬂash, this means that the battery pack is

defective.

♦ Disconnect the power plug from the mains

power socket. Remove the battery pack from

the high-speed charger .

♦ Never recharge a battery pack again imme-

diately after rapid charging. There is a risk that

the battery pack will overheat, which will

reduce the lifespan of the again.

♦ Switch the high-speed charger oﬀ for at least

15 minutes between successive charging

processes. Also disconnect the power plug from

the mains power socket.

PAEXS 20-Li A1

■ 8 │ GB│IE

Attaching/disconnecting the battery

pack to/from the appliance

Inserting the battery pack

♦ Push the battery pack into the handle until it

clicks into place.

Removing the battery pack

♦ Press the release button and remove the

battery pack .

Checking the battery charge level

♦ To check the battery status, press the battery

charge level button (see ﬁg. A). The status

will be shown on the battery display LED as

follows:

RED/ORANGE/GREEN = maximum charge

RED/ORANGE = medium charge

RED = low charge – charge the battery

Selecting a sanding sheet

Removal and surface

The material removal rate and surface quality are

determined by the grain strength of the sanding

sheet.

♦ Please note that you need to use appropriate

sanding sheets with diﬀerent grains for working

diﬀerent materials.

Fitting the sanding sheet

WARNING!

► Remove the battery pack before carrying out

any work on the appliance.

NOTE

► Before ﬁtting a new sanding sheet , remove

any dust and dirt from the sanding plate .

Attaching sanding sheets using Velcro

♦ You can attach the sanding sheet to the

sanding plate using the Velcro.

♦ Make sure that the extraction holes on the

sanding sheet match up with those on the

sanding plate .

Removing sanding sheets ﬁtted using Velcro

♦ Simply pull the sanding sheet oﬀ the sanding

plate .

Dust extraction

WARNING! RISK OF FIRE!

► There is a risk of ﬁre when working with

power tools ﬁtted with a dust collection box

or which can be connected to a vacuum

cleaner via the vacuum cleaner adapter! In

unfavourable conditions, e.g. when sparks

are ﬂying while sanding metal or metal resi-

dues in wood, wood dust in the dust sack (or

in the vacuum cleaner dust bag) can sponta-

neously ignite. This is a particular risk if the

wood dust is mixed with paint residues or

other chemicals and the workpiece has

become hot after being worked for a long

time. Therefore, do not allow the workpiece

to overheat and always empty the dust box

or the dust bag in the vacuum cleaner before

taking a break from work.

Wear a dust mask!

NOTE

► Perforated sanding sheets are required for

dust extraction.

PAEXS 20-Li A1 GB│IE │ 9 ■

Dust box

Connecting

♦ Slide the dust box onto the appliance as far

as the stop.

Removal

♦ Pull the dust box oﬀ the appliance.

NOTE

► To achieve optimum dust extraction, the dust

box should be emptied regularly.

♦ To do this, remove the dust box from the

appliance as described above. Open the dust

box by pulling on the tab and then removing

the lid. Clean both parts thoroughly by tapping.

Reducer

Connecting

♦ Push the reducer for external extraction appli-

ances into the adapter ﬁtting .

♦ Push the hose from a suitable dust extraction

appliance (e.g. a workshop vacuum cleaner)

onto the reducer for external extraction appli-

ances .

Removal

♦ Pull the hose of the vacuum cleaner oﬀ the

reducer for external extraction appliances .

♦ Remove the reducer .

Use

NOTE

► Always switch on the appliance before contact

with the material and then apply the tool to the

workpiece.

Adjusting the additional handle

You can adjust the additional handle to several

diﬀerent positions.

♦ To reposition the additional handle undo

the screw .

♦ Move the additional handle to the required

position.

♦ Retighten the screw .

Switching on and oﬀ

Switching the appliance on

♦ Move the ON/OFF switch to the "I" position.

Switching the appliance oﬀ

♦ Move the ON/OFF switch to the "0" position.

Setting the rotational speed

♦ Adjust the speed setting wheel to a position

between 1 and 6.

Working procedures

■ Switch the appliance on before applying it to

the workpiece.

■ Apply minimal pressure when working.

■ Work at a constant speed.

■ Change the sanding sheets regularly.

■ Never use the same sanding sheet for sanding

diﬀerent materials (e.g. wood followed by

metal). Optimum sanding results can only be

achieved by using clean sanding sheets.

PAEXS 20-Li A1

■ 10 │ GB│IE

■ Clean the sanding sheet every once in a while

using a vacuum cleaner.

■ Sand hard-to-reach places with the front or side

edge of the sanding sheet on the sander plate.

■ Guide the sander over the workpiece in parallel

and use overlapping sanding motions.

■ After completing the task, lift the appliance from

the workpiece and then switch it oﬀ.

Maintenance and cleaning

WARNING! RISK OF INJURY!

Before carrying out any work on the

appliance, switch oﬀ the appliance

and remove the battery pack.

The appliance is maintenance-free.

■ Always clean the appliance immediately after

completing work.

■ Use a dry cloth to clean the housing.

■ Remove any sanding dust stuck to the appliance

with a brush.

■ Never use sharp objects, petrol, solvents or

cleaning agents which can damage plastic.

Do not allow any liquids to get into the interior

of the appliance.

■ Always keep the ventilation openings free of

obstructions.

Kompernass Handels GmbH

warranty

Dear Customer,

This appliance has a 3-year warranty valid from the

date of purchase. If this product has any faults, you,

the buyer, have certain statutory rights. Your statu-

tory rights are not restricted in any way by the

warranty described below.

Warranty conditions

The warranty period starts on the date of purchase.

Please keep your receipt in a safe place. This will

be required as proof of purchase.

If any material or manufacturing fault occurs within

three years of the date of purchase of the product,

we will either repair or replace the product for you

or refund the purchase price (at our discretion).

This warranty service requires that you present the

defective appliance and the proof of purchase

(receipt) within the three-year warranty period,

along with a brief written description of the fault

and of when it occurred.

If the defect is covered by the warranty, your

product will either be repaired or replaced by us.

The repair or replacement of a product does not

signify the beginning of a new warranty period.

X 12 V and X 20 V Team Series battery packs

come with a 3-year warranty valid from the date of

purchase.

PAEXS 20-Li A1 GB│IE │ 11 ■

Warranty period and statutory claims

for defects

The warranty period is not prolonged by repairs

eﬀected under the warranty. This also applies to

replaced and repaired components. Any damage

and defects present at the time of purchase must be

reported immediately after unpacking. Repairs

carried out after expiry of the warranty period shall

be subject to a fee.

Scope of the warranty

This appliance has been manufactured in accord-

ance with strict quality guidelines and inspected

meticulously prior to delivery.

The warranty covers material faults or production

faults. The warranty does not extend to product

parts subject to normal wear and tear or to fragile

parts which could be considered as consumable

parts such as switches or parts made of glass.

The warranty does not apply if the product has

been damaged, improperly used or improperly

maintained. The directions in the operating instruc-

tions for the product regarding proper use of the

product are to be strictly followed. Uses and

actions that are discouraged in the operating

instructions or which are warned against must be

avoided.

This product is intended solely for private use and

not for commercial purposes. The warranty shall be

deemed void in cases of misuse or improper

handling, use of force and modiﬁcations / repairs

which have not been carried out by one of our

authorised Service centres.

The warranty period does not apply to

■ Normal reduction of the battery capacity

overtime

■ Commercial use of the product

■ Damage to or alteration of the product by the

customer

■ Non-compliance with safety and maintenance

instructions, operating errors

■ Damage caused by natural hazards

Warranty claim procedure

To ensure quick processing of your case, please

observe the following instructions:

■ Please have the till receipt and the item number

(e.g.IAN12345) available as proof of purchase.

■ You will ﬁnd the item number on the type plate

on the product, an engraving on the product,

on the front page of the operating instructions

(below left) or on the sticker on the rear or

bottom of the product.

■ If functional or other defects occur, please

contact the service department listed either by

telephone or by e-mail.

■ You can return a defective product to us free of

charge to the service address that will be

provided to you. Ensure that you enclose the

proof of purchase (till receipt) and information

about what the defect is and when it occurred.

You can download these instructions

along with many other manuals,

product videos and installation

software at www.lidl-service.com.

This QR code will take you directly to the Lidl

service page (www.lidl-service.com) where you

can open your operating instructions by entering

the item number (IAN) 351737_2007.

WARNING!

►Have the appliances repaired by the

Service Centre or a qualiﬁed electrician

and only using genuine replacement parts.

This will ensure that the safety of the appli-

ance is maintained.

PAEXS 20-Li A1

■ 12 │ GB│IE

Service

Service Great Britain

Tel.: 0800 404 7657

E-Mail: [email protected]

Service Ireland

Tel.: 1890 930 034

(0,08 EUR/Min., (peak))

(0,06 EUR/Min., (oﬀ peak))

E-Mail: [email protected]

IAN 351737_2007

Importer

Please note that the following address is not the

service address. Please use the service address

provided in the operating instructions.

KOMPERNASS HANDELS GMBH

BURGSTRASSE 21

44867 BOCHUM

GERMANY

www.kompernass.com

Disposal

The packaging is made from environ-

mentally friendly material which can be

disposed of at your local recycling

plant.

Do not dispose of power tools in

your normal domestic waste!

European Directive 2012/19/EU

requires that worn-out power tools be

collected separately and recycled in an environ-

mentally compatible manner.

Your local community or municipal authorities can

provide information on how to dispose of the

worn-out appliance.

Do not dispose of batteries in

your normal household waste!

Defective or worn-out rechargeable

batteries must be recycled according

toDirective 2006/66/EC. Take the battery pack

and/or tool to a nearby collection facility.

Please consult your local authorities regarding

suitable disposal of worn out power tools/battery

packs.

Dispose of the packaging in an

environmentally friendly manner. Note

the labelling on the packaging and

separate the packaging material

components for disposal if necessary. The pack-

aging material is labelled with abbreviations (a)

and numbers (b) with the following meanings:

1–7: plastics, 20–22: paper and cardboard,

80–98: composites.

Your local community or municipal

authorities can provide information

on how to dispose of the worn-out

product.

The product is recyclable, subject to

extended producer responsibility and is

collected separately.

PAEXS 20-Li A1 GB│IE │ 13 ■

Original Declaration of Conformity

We, KOMPERNASS HANDELS GMBH, document oﬃcer: Mr Semi Uguzlu, BURGSTR. 21,

44867 BOCHUM, GERMANY, hereby declare that this product complies with the following standards,

normative documents and EC directives:

Machinery Directive (2006/42/EC)

EC Low Voltage Directive (2014/35/EU, charger only)

EMC (Electromagnetic Compatibility) (2014/30/EU)

RoHS Directive (2011/65/EU)*

* The manufacturer bears the full responsibility for compliance with this conformity declaration. The object of the

declaration described above complies with the requirements of the Directive 2011/65/EU of the European Parliament

and Council of 8 June 2011 on the limitations of use of certain dangerous substances in electrical and electronic

appliances.

Applied harmonised standards

EN 62841-1:2015

EN 62841-2-4:2014

EN 60335-1:2012/A13:2017

EN 60335-2-29:2004/A2:2010

EN 62233:2008

EN 55014-1:2017

EN 55014-2:2015

EN 61000-3-2:2014

EN 61000-3-3:2013

EN 50581:2012

Type/appliance designation: Cordless Orbital Sander PAEXS 20-Li A1

Year of manufacture: 11–2020

Serial number: 351737_2007

Bochum, 17/11/2020

Semi Uguzlu

- Quality Manager -

We reserve the right to make technical changes in the sense of further product development.

PAEXS 20-Li A1

■ 14 │ GB│IE

Ordering a replacement battery

If you want to order a replacement battery for your appliance, you can do so easily via the Internet on

www.kompernass.com or by telephone.

Due to limited stocks, this item may sell out in a relatively short time.

NOTE

► Online ordering of replacement parts might not be possible in some countries. In this is the case,

please contact the Service hotline.

Telephone ordering

Service Great Britain Tel.: 0800 404 7657

Service Ireland Tel.: 1890 930 034

(0,08 EUR/Min., peak · 0,06 EUR/Min., oﬀ peak)

To ensure fast processing of your order, have the article number of your appliance to hand

(e.g. IAN 351737) in case of questions. The article number can be found on the type plate

or the title page of these instructions.

PAEXS 20-Li A1 DE│AT│CH │ 15 ■

Inhaltsverzeichnis

Einleitung .............................................................16

Bestimmungsgemäßer Gebrauch .......................................................16

Ausstattung ........................................................................16

Lieferumfang .......................................................................16

Technische Daten ...................................................................16

Allgemeine Sicherheitshinweise für Elektrowerkzeuge .......................17

1. Arbeitsplatzsicherheit ..............................................................17

2. Elektrische Sicherheit ..............................................................17

3. Sicherheit von Personen ............................................................18

4. Verwendung und Behandlung desElektrowerkzeugs .....................................18

5. Verwendung und Behandlung desAkkuwerkzeugs .......................................19

6. Service .........................................................................20

Sicherheitshinweise für Ladegeräte .....................................................20

Gerätespeziﬁsche Sicherheits hinweise ...................................................20

Originalzubehör/-zusatzgeräte ........................................................21

Vor der Inbetriebnahme ................................................21

Akku-Pack laden (siehe Abb. A) ........................................................21

Akku-Pack ins Gerät einsetzen/entnehmen ...............................................22

Akkuzustand prüfen .................................................................22

Schleifblatt wählen ..................................................................22

Schleifblatt befestigen ...............................................................22

Staubabsaugung ...................................................................22

Fangbox zur Eigenabsaugung .........................................................23

Reduzierstück ......................................................................23

Inbetriebnahme .......................................................23

Zusatzhandgriﬀ einstellen .............................................................23

Ein- und ausschalten .................................................................23

Drehzahl einstellen ..................................................................23

Arbeitshinweise. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Wartung und Reinigung .................................................24

Garantie der Kompernaß Handels GmbH ..................................24

Service ...............................................................26

Importeur ............................................................26

Entsorgung ...........................................................26

Original-Konformitätserklärung ..........................................27

Ersatz-Akku Bestellung .................................................28

Telefonische Bestellung ...............................................................28

PAEXS 20-Li A1

■ 16 │ DE│AT│CH

AKKU-EXZENTERSCHLEIFER

PAEXS 20-Li A1

Einleitung

Wir beglückwünschen Sie zum Kauf Ihres

neuen Gerätes. Sie haben sich damit für

ein hochwertiges Produkt entschieden.

Die Bedienungsanleitung ist Teil dieses Produkts.

Sie enthält wichtige Hinweise für Sicherheit, Ge-

brauch und Entsorgung. Machen Sie sich vor der

Benutzung des Produkts mit allen Bedien- und

Sicherheitshinweisen vertraut. Benutzen Sie das

Produkt nur wie beschrieben und für die angege-

benen Einsatzbereiche. Händigen Sie alle Unter-

lagen bei Weitergabe des Produkts an Dritte mit aus.

Bestimmungsgemäßer Gebrauch

Das Gerät ist – je nach Schleifpapier – zum

trockenen Schleifen von Holz, Kunststoﬀ, Metall,

Spachtel masse sowie lackierten Oberﬂächen be-

stimmt. Jede andere Verwendung oder Verände-

rung des Gerätes gilt als nicht bestimmungsgemäß

und birgt erhebliche Unfallgefahren. Für aus be-

stimmungswidriger Verwendung entstandene

Schäden übernehmen wir keine Haftung. Nicht für

den gewerblichen Gebrauch bestimmt.

Ausstattung

EIN-/AUS-Schalter

Entriegelungstaste

Lasche (Fangbox)

Fangbox zur Eigenabsaugung

Reduzierstück zur Fremdabsaugung (zweiteilig)

Adapteranschluss

Schleifblatt

Schleifplatte

Schraube

Zusatzhandgriﬀ

Drehzahl-Stellrad

Abbildung A

Akku-Display-LED

Taste Akkuzustand

Akku-Pack*

Schnellladegerät*

grüne Kontroll-LED

rote Kontroll-LED

Lieferumfang

1 Akku-Exzenterschleifer

4 Exzenterschleifblätter

(Körnung 60/80/120/240)

1 Fangbox

1 Reduzierstück zur Fremdabsaugung (zweiteilig)

1 Bedienungsanleitung

Technische Daten

Akku-Exzenterschleifer PAEXS 20-Li A1

Bemessungsspannung 20 V (Gleichstrom)

Bemessungs-

Leerlaufdrehzahl n0 3000–12000 min-1

Schleifblatt Ø 125 mm

Akku PAP 20 A1*

Typ LITHIUM-IONEN

Bemessungsspannung 20 V (Gleichstrom)

Kapazität 2 Ah

Zellen 5

Akku-Schnellladegerät PLG 20 A1*

EINGANG/Input

Bemessungsspannung 230–240 V ∼, 50 Hz

(Wechselstrom)

Bemessungsaufnahme 65 W

Sicherung (innen) 3,15 A T3.15A

AUSGANG/Output

Bemessungsspannung 21,5 V (Gleichstrom)

Bemessungsstrom 2,4 A

Ladedauer ca. 60 min

Schutzklasse II /

(Doppelisolierung)

* AKKU UND LADEGERÄT SIND NICHT IM

LIEFERUMFANG ENTHALTEN

Strona się ładuje...

Parkside PAEXS 20-Li A1 Instrukcja obsługi

Parkside PAEXS 20-Li A1 Instrukcja obsługi

w innych językach

Powiązane artykuły