LG FH4U1JBHK6N Instrukcja obsługi

OWNER’S MANUAL

WASHING MACHINE

FH4U1JBH(0~9)N

FH4U1JBHK(0~9)N

WDU1H426JCH

WDU1H466JCH

MFL68801010

www.lg.com

Before beginning installation, read these instructions carefully.

This will simplify installation and ensure that the washer is

installed correctly and safely. Leave these instructions near

the washer after installation for future reference.

2

Contents....................................2

Product Features......................3

Important safety instructions

Important safety instructions .................4

Basic safety precautions .......................5

Save these instructions.........................6

Safety instructions for use.....................7

Specifications...........................8

Installation

Removing packing ................................9

Removing transit bolts ..........................9

Installation place requirements ...........10

Connecting water supply hose............12

Installation of drain hose .....................14

Leveling...............................................15

How to use washer

Operating washing machine ...............17

Care before washing...........................18

Washing program table.......................19

Drying Program Table.........................20

Extra options .......................................21

Operating data ....................................21

Control panel.......................................22

Options................................................23

- Pre Wash ..........................................23

- Favorite.............................................23

- Steam (Wash and Softener) .............23

- Delay.................................................24

- Wash.................................................24

- Temp.................................................24

- Rinse.................................................24

- Spin...................................................24

Child Lock ...........................................25

Beep On/Off ........................................25

Tub Clean ...........................................26

Door Lock & Detecting ........................26

Dry ......................................................27

Before using the Tag On function

Turning on the NFC function of the

smart phone...........................................29

The Tag On guide..................................30

Thank you for buying a LG Fully

Automatic Washing Machine.

Please read your owner’s manual

carefully, it provides instruction on safe

installation, use and maintenance.

Retain it for future reference.

Record the model and serial number of

your washing machine.

Model No.

Serial No.

Date of Purchase

Adding detergent

Adding detergent and fabric softener..31

Maintenance

The water inlet filter.............................33

The drain pump filter ...........................34

Dispenser drawer................................35

The washing drum ..............................36

Cleaning your washer .........................36

Cold conditions ...................................36

Troubleshooting guide

Diagnosing problems ..........................37

Error messages...................................39

Using SmartDiagnosis™.....................40

Terms of warranty ..................41

Contents

3

추가선택 예약

Inverter Direct Drive system

The advanced Brushless DC motor directly drives the drum without

belt and pulley.

Low noise speed control system

By sensing the amount of load and balance, it evenly distributes load

to minimize the spinning noise level.

Child Lock

The Child Lock prevents children from pressing any button to change

the settings during operation.

More economical with Intelligent Wash system

Intelligent Wash System detects the size of load and water temperature,

and then determines the optimum water level and washing time to

minimize energy and water consumption.

Protection against creases

With the alternating rotation of the drum, creasing is minimized.

6 Motion

Washer is able to perform various drum actions or a combination of

different actions depending on the wash program selected.

Combined with a controlled spin speed and the ability of the drum to

rotate both left and right, the wash performance of the machine is greatly

improved, giving you perfect results every time.

Product Features

Tag on

This is a function that may use Diagnosis, Download Cycle, Washing

Coach, One Touch Washing, etc. when you touch the Tag On logo of

the washing machine by using your smartphone with NFC.

SmartDiagnosis™

Should you experience any technical difficulty with your washing

machine, it has the capability of transmitting data by phone to the

Customer Information Center. The call center agent records the data

transmitted from your machine and uses it to analyze the issue,

providing a fast and effective diagnosis.

Auto Restart

Auto Restart allows the program to restart all by itself in case of power

failure. It does from the stage where it stopped.

4

Important safety instructions

For your safety, the information in this manual must be followed to minimize the risk of fire or

explosion, electric shock, or to prevent property damage, injury to persons, or death.

READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION

BEFORE USE.

WARNING

You can be killed or seriously injured if you don’t follow instructions.

Your Safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance.

Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word DANGER,

WARNING or CAUTION.

These words mean:

WARNING

You may be slightly injured or cause damage to the product if you do not follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance

of injury, and tell you what can happen if the instructions are not followed.

CAUTION

You will be killed or seriously injured if you don’t immediately follow instructions.

DANGER

5

Important safety instructions

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic

precautions, including the following:

WARNING

• Before installation, check exterior

damages. If it has, do not install.

• Do not install or store the washer

where it will be exposed to the

weather.

• Do not tamper with controls.

• Do not repair or replace any part of

the washer or attempt any servicing

unless specifically recommended in

the user-maintenance instructions or

published user-repair instructions

that you understand and have the

skills to carry out.

• Keep the area underneath and around

your appliances free of combustible

materials such as lint, paper, rags,

chemicals, etc.

• The appliance is not intended for use

by young children or infirm persons

without supervision. Do not allow

children to play on, with, or inside this

or any other appliance.

• Keep small animals away from the

appliance.

• Do not leave the washer door open.

An open door could entice children to hang

on the door or crawl inside the washer.

• Never reach into washer while it is

moving. Wait until the drum has

completely stopped.

• The laundry process can reduce the flame

retardant of fabrics.

To avoid such a

result, carefully follow the garment

manufacturer’s wash and care

instructions.

• Do not wash or dry articles that have

been cleaned in, washed in, soaked

in, or spotted with combustible or

explosive substances (such as wax,

oil, paint, gasoline, degreasers, dry-

cleaning solvents, kerosene, etc.)

which may ignite or explode. Oil may

remain in the tub after a whole cycle resulting

in fire during drying.

So, do not load oiled clothes.

• Do not slam the washer door closed

or try to force the door open when

locked. This could result in damage to the

washer.

• When the machine runs high

temperature, the front door may be

very hot. Don’t touch it.

• To minimize the possibility of electric

shock, unplug this appliance from the

power supply or disconnect the

washer at the household distribution

panel by removing the fuse or

switching off the circuit breaker

before attempting any maintenance or

cleaning.

• When unplugging power cord, do not

pull out by grasping the cord.

Otherwise, the power cord may be damaged.

• Never attempt to operate this

appliance if it is damaged,

malfunctioning, partially

disassembled, or has missing or

broken parts, including a damaged

cord or plug.

■ Basic safety precautions

6

Important safety instructions

■ Basic safety precautions

To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic

precautions, including the following:

WARNING

• Before discarding an old machine

unplug it. Render the plug useless.

Cut off the cable directly behind the

appliance to prevent misuse.

• When a product was under water,

Please call service center. There is a

risk of electric shock and fire.

• Appliance connected to the water

mains using new hose-sets. Old hose-

sets should not be reused.

• To reduce the risk of personal injury,

adhere to all industry recommended

safety procedures including the use

of long sleeved gloves and safety

glasses. Failure to follow all of the safety

warnings in this manual could result in

property, personal injury or death.

• Do not push down the door

excessively, when washer door open.

This could topple over the washer.

• This appliance can be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance in

a safe way and understand the

hazards involved. Children shall

not play with the appliance.

Cleaning and user maintenance

shall not be made by children

without supervision.

Children of less than 3 years

should be kept away unless

continuously supervised.

■ Save these instructions

Improper connection of the equipment-grounding conductor can result in electric shock.

Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is

properly grounded. Do not modify the plug provided with the appliance - if it does not fit the

outlet, have a proper outlet installed by a qualified electrician.

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of malfunction or breakdown, grounding will

reduce the risk of electric shock by providing a path of least resistance for electric current.

This appliance is equipped with a cord having an equipment-grounding conductor and

grounding plug. The plug must be plugged into an appropriate outlet that is properly installed

and grounded in accordance with all local codes and ordinance.

• Do not use an adapter this will defeat the grounding plug.

• If you don’t have the proper outlet, consult an electrician.

WARNING

7

Important safety instructions

To minimize the risk of fire within the inner bowl, the following should be observed:

• Items that have been spotted or

soaked with vegetable or cooking oil

constitute a fire hazard and should

not be placed in a tumble dryer.

Oil-affected items can ignite spontaneously,

especially when exposed to heat sources

such as in a tumble dryer.

The items become warm, causing an

oxidation reaction in the oil. Oxidation

creates heat. If the heat cannot escape, the

items can become hot enough to catch fire.

Piling, stacking or storing oil-affected items

can prevent heat from escaping and so

create a fire hazard. If it is unavoidable that

fabrics that contain vegetable or cooking oil

or have been contaminated by hair care

products be placed in a tumble dryer they

should first be washed in hot water with

extra detergent-this will reduce, but not

eliminate, the hazard.

The ‘cool down’ cycle of tumble dryers

should be used to reduce the temperature of

the items.

They should not be removed from the tumble

dryer or piled or stacked while hot.

• Items that have been previously

cleaned in, washed in, soaked in or

spotted with petrol/gasoline, dry-

cleaning solvents or other flammable

or explosive substances should not

be placed in a tumble dryer. Highly

flammable substances commonly used in

domestic environments include acetone,

denatured alcohol, petrol/gasoline,

kerosene, spot removers (some brands),

turpentine, waxes and wax removers.

• Items containing foam rubber (also

known as latex foam) or similarly

textured rubber like materials should

not be dried in a tumble dryer on a

heat setting. Foam rubber materials can,

when heated, produce fire by spontaneous

combustion.

• Fabric softeners or similar products

should not be used during a drying

cycle, to eliminate the effects of static

electricity unless this practice is specifically

recommended by the manufacturer of the

fabric softener or product.

• Undergarments that contain metal

reinforcements should not be placed

in a tumble dryer.

Damage to the tumble dryer can result if

metal reinforcements come loose during

drying. When available a drying rack could

be used for such items.

• Plastic articles such as shower caps

or babies waterproof napkin covers

should not be placed in a tumble

dryer.

• Rubber-backed articles, clothes fitted

with foam rubber pads, pillows,

rubber boots and rubber-coated

tennis shoes should not be placed in

a tumble dryer.

■ Safety instructions for use

8

■ Name : Front loading washing machine

■ Power supply : 220 - 240 V~, 50 Hz

■ Size : 600 mm (W)  610 mm (D)  850 mm (H)

■ Weight : 71 kg

■ Max.Watt : 2100 W (Wash) / 1600 W (Dry)

■ Wash capacity : 10.5 kg (Wash) / 7 kg (Dry)

■ Permissible water pressure : 100 - 1000 kPa (1.0 - 10.0 kgf / cm

2

)

The appearance and specifications may vary without notice to improve the quality of the unit.

(For detergent and

fabric softener)

Drawer

Drain hose

Transit bolts

Power plug

Control panel

Drain pump filter

Cover cap

• If the supply cord is damaged,

it must be replaced by the

manufacturer or its service agents

or a similarly qualified person in

order to avoid a hazard.

Drum

Door

Drain plug

Adjustable feet

Specifications

■

Accessories

Inlet hose(1EA) Spanner

9

■ Removing packing

1. Remove the cardboard box and

styrofoam packing.

2. Lift the washing machine and remove

the base packing.

3. Remove the tape securing the power

supply cord and drain hose.

4. Remove the inlet hose from the drum.

1. Unscrew the 4 bolts with

the spanner supplied.

2. Take out the 4 bolts along with the

rubber bungs by slightly twisting the

bung.

3. Close the holes with the caps supplied.

To prevent internal damage during transport, the 4 special bolts are locked.

Before operating the washer, remove the bolts along with the rubber bungs.

If they are not removed, it may cause heavy vibration, noise and malfunction.

■ Removing transit bolts

Transit bolt

Installation

WARNING

• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.

There is a risk of suffocation ! Keep all packaging well away from children.

NOTE

• Keep the spanner provided for

future use.

NOTE

• Keep the transit bolts for future use.

Spanner

Washer

Base Packing

10

Washer

approx.

2cm

• Level floor :

Allowable slope under entire washer is 1˚.

• Power outlet :

Must be within 1.5 meters of either side of location of washer.

Do not overload the outlet with more than one appliance.

• Additional Clearance :

For Wall, 10cm:rear / 2cm : right & left side

Do not place or store laundry products on top of washer at

any time.

They can damage the finish or controls.

■ Installation place requirements



Positioning



Location

• Install the washer on a flat hard floor.

• Make sure that air circulation around the washer is not impeded by carpets, rugs, etc.

• Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under

the washer.

• If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an

insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be inserted

between the two appliance.

• The washer must not be installed in rooms where the temperature can drop below 0°C.

• Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a

breakdown.

• With the washer installed, adjust all four feet using the transit bolt spanner provided ensuring the appliance

is stable, and a clearance of approximately 20mm is left between the top of the washer and the underside of

any work-top.

• This equipment is not designed for maritime use or for use in a mobile installations such as caravans,

aircraft etc.

• Do not use an extension cord or double adapter.

• If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly

qualified person in order to avoid a hazard.

• Always unplug the machine and turn off the water supply after use.

• Connect the machine to an earthed socket in accordance with current wiring regulations.

• The appliance must be positioned so that the plug is easily accessible.

• Repairs to the washing machine must only be carried out by qualified personnel.

Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your

local service center

• Do not install your washing machine in rooms where temperature below freezing may occur. Frozen

hoses may burst under pressure. The reliability of the electronic control unit may be impaired at

temperatures below freezing point.

• If the appliance is delivered in the winter months and temperatures are below freezing : Place the

washing machine at room temperature for a few hours before putting it into operation.



Electrical connection

Installation

11

Installation

CAUTION

CAUTION concerning the Power cord

• Most appliances recommend they be placed upon a dedicated circuit; that is, a single

outlet circuit which powers only that appliance and has no additional outlets or branch

circuits. Check the specification page of this owner's manual to be certain.

• Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,

extension cords, frayed power cords, or damaged or cracked wire insulation are

dangerous. Any of these conditions could result in an electric shock or fire.

• Periodically examine the cord of your appliance, and if its appearance indicates

damage or deterioration, unplug it, discontinue use of the appliance, and have the cord

replaced with an exact replacement part by an authorized servicer.

• Protect the power cord from physical or mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,

wall outlets, and the point where the cord exits the appliance.

If the appliance is supplied from a cord extension set or an electrical portable outlet

device, The cord extension set on electrical portable outlet device must be positioned

so that it is not subject to splashing or ingress of moisture.

CAUTION

• The appliance is not intended for use by young children or infirm persons without

supervision.

• Young children should be supervised to ensure that they do not play with appliance.

12

1. Unscrew the adapter ring plate and the 4

adapter retaining screws.

2. Push the adapter onto the end of the tap

so that the rubber seal forms a watertight

connection. Tighten the adapter ring plate

and the 4 screws.

3. Push the water supply hose vertically

upwards so that the rubber packing within

the hose can adhere completely to the

tap and then tighten it by screwing it to

the right.

• Water supply pressure must be between 100 kPa and 1000 kPa (1.0 - 10.0 kgf / cm

2

).

• Do not strip or crossthread when connecting inlet hose to the valve.

• If the water supply pressure is more than 1000 kPa, a decompression device should be installed.

• Periodically check the condition of the hose and replace the hose if necessary.

Type-A : Connecting Screw-type hose to tap with thread

• Screw the hose connector onto water

supply tap.

■ Connecting water supply hose



Step1 : Check rubber seal inlet hose



Step2 : Connect hose to water tap

• Two rubber seals are supplied with the

water inlet hoses.

They are used for preventing water leaks.

Make sure the connection to taps is

sufficiently tight.

Upper

connector

Rubber

packing

Plate

Water supply

hose

Fixing screw

Hose

connector

Rubber

seal

Type-B : Connecting Screw-type hose to tap without thread

Installation

13

1. Unscrew the adapter ring plate and

the 4 adapter retaining screws.

2. Remove the guide plate if the tap is

too large to fit the adapter.

3. Push the adapter onto the end of

the tap so that the rubber seal forms

a watertight connection.

Tighten the adapter ring plate and

the 4 screws.

4. Pull the connector latch plate down,

push the inlet hose onto the adapter,

and release the connector latch plate.

Make sure the adapter locks into place.

Please use the horizontal tap

Horizontal tap Extension tap Square tap

Ring plate

Guide plate

Latch plate

Type-C : Connecting one touch type hose to tap without thread



Step3: Connect hose to washer

• Make sure that there are no kinks in the

hose and that they are not crushed.

Installation

NOTE

• After completing connection, if water leaks from the hose, repeat the same steps.

Use the most conventional type of faucet for water supply. In case the faucet is square or

too big, remove the spacing ring before inserting the faucet into the adaptor.

NOTE

• After connecting inlet hose to water

tap, turn on the water tap to flush

out foreign substances (dirt, sand or

sawdust) in the water lines. Let

water drain into a bucket, and

check the water temperature.

14

 Installation of drain hose

• The drain hose should not be placed

higher than 100 cm above the floor.

Water in the washer does not drain or

drains slowly.

• Securing the drain hose correctly will

protect the floor from damage due to

water leakage.

• If the drain hose is too long, do not force

back into the washer.

This will cause abnormal noise.

• When installing the drain hose to a sink,

secure it tightly with string.

• Securing the drain hose correctly will

protect the floor from damage due to

water leakage.

about 100 cm

about 145 cm

about 105 cm

max. 100 cm

Hose

Retainer

Tie strap

Laundry tub

max. 100 cm

Installation

15

•

Diagonal Check

When pushing down the edges of the

washing machine top plate diagonally,

the machine should not move up and down

at all (Please, check both directions). If

machine rocks when pushing the machine

top plate diagonally, adjust the feet again.

2. If the floor is uneven, turn the adjustable feet

as required. (do not insert pieces of wood

etc. under the feet)

Make sure that all four feet are stable and

resting on the floor and then check that the

appliance is perfectly level. (use a spirit

level)

1. Leveling the washing machine properly

prevents excessive noise and vibration.

Install the appliance on a solid and level

floor surface, preferably in a corner of the

room.

■ Leveling

•

Once the washer is level, tighten the lock

nuts up towards the base of the washer.

All lock nuts must be tightened.

Raise Lower

Lock

Nut

Tighten all 4

locknuts securely

Installation

NOTE

• Timber or suspended type flooring

may contribute to excessive

vibration and unbalance.

NOTE

• If the washing machine is installed on a raised platform, it must be securely fastened in

order to eliminate the risk of falling off.

16



Concrete floors



Wooden floors (Suspended floors)

• The installation surface must be clean, dry and level.

• Install washer on a flat hard floor.



Tile floors (Slippery floors)

• Position each foot on the Tread Mate and level the machine to suit. (Cut Tread Mate into

70x70 mm sections and stick the pieces on to the dry tile where machine is to be placed.)

• Tread Mate is a self adhesive material used on ladders & steps that prevents slipping.

•

Wooden floors are particularly susceptible to vibration.

•

To prevent vibration we recommend you place rubber cups under

each foot under washer at least 15mm thick, secured to at least

2 floor beams with screws.

•

If possible install the washer in one of the corners of the room, where the floor is more stable.

•

Fit the rubber cups to reduce vibration.

•

You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept.

Rubber Cup

Installation

NOTE

• Proper placement and leveling of the washer will ensure long, regular and reliable

operation.

• The washer must be 100% horizontal and stand firmly in position.

• It must not “Seesaw” across corners under load.

• The installation surface must be clean, free from floor wax and other lubricant coatings.

• Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.

17

 Operating washing machine

2. Open the door and load laundry.

1. Sort Laundry.

(Refer to 18 page)

3. Press the Power button.

4. Select a Program.

(Refer to 19~21 page)

5. Add detergent.

(Refer to 31~32 page)

6. Press the Start/Pause button.

Select options at this time

(Refer to 23~28 page)

How to use washer

18

How to use washer

■ Care before washing

3. Caring before loading

Combine large and small items in a load. Load large items first.

Large items should not be more than half the total wash load. Do

not wash single items.

This may cause an out-of-balance load. Add one or two similar

items.

• Check all pockets to make sure that they are empty. Items such

as nails, hair clip, matches, pens, coins and keys can damage

both your washer and your clothes.

• Close zippers, hooks and strings to make sure that these items

don’t snag on other clothes.

• Pre-treat dirt and stains by brushing a little detergent 'dissolved'

in 'water' onto stains to help lift dirt.

• Check the folds of the flexible gasket (gray) and remove any

small articles.

• Check inside of the drum and remove any items from a previous

wash.

• Remove any clothing or items from the flexible gasket to prevent

clothing and gasket damage.

2. Sorting

To get the best results, sort clothes into loads that can be

washed with the same wash cycle.

Different fabrics need to be washed at varying temperatures and

spin speeds.

Always sort dark colours from pale colours and whites. Wash

separately as dye and lint transfer can occur causing

discolouration of white and pale garments. If possible, do not

wash heavily soiled items with lightly soiled ones.

• Soil (Heavy, Normal, Light)

Separate clothes according to amount of soil.

• Colour (White, Lights, Darks)

Separate white fabrics from coloured fabrics.

• Lint (Lint producers, Collectors)

Wash lint producers and lint collectors separately.

1. Care Labels

Look for a care label on your clothes.

This will tell you about the fabric content of your garment and

how it should be washed.

Wash temperature

Normal machine wash

Permanent press

Hand wash

Sort laundry by...

Soiling

Colour

Wash

temperature

Fabric type

Delicate

Do not wash

NOTE

• Before the first wash, select a cycle (Cotton 60°C, add a half load of detergent) allow the unit to

wash without clothing. This will remove residues and water from the drum that may have been

left during manufacturing.

19

 Washing program table

•

Recommended courses according to the laundry type.

How to use washer

Program

Description

Fabric type

Proper

Temp.

Maximum

Load

Cotton

Provides better performance by

combining various drum motions.

Provides optimised washing

performance for large amount of

laundry with less energy consumption.

Cotton

Large

40°C

(Cold to 95°C)

60°C

(Cold to 60°C)

Rating

3 items

Colour fast garments (shirts,

nightdresses, pajamas, etc)

and normally soiled cotton

load (underwear).

This cycle provides nonstop process

from washing to drying at once.

Wash+

Dry

This cycle is suitable for casual

shirts that do not need ironing

after washing.

Polyamide, Acrylic, Polyester.

Easy

Care

40°C

(Cold to 60°C)

Less than

4.0 kg

Enables various fabrics to be

washed simultaneously.

Various kind of fabrics except

special garments.

(Silk/delicate, sports wear, dark

clothes, wool, Duvet/Curtains).

Mix

40°C

(Cold to 40°C)

Allergy

Care

Removes allergens such as

house mites, pollen, and cat fur.

Cotton, underwear, pillow

covers, bed sheets, baby wear.

60°C

Direct

Wear

This cycle provides washing to

drying within 1 hour at once for light

soiled 1~3 shirts.

Cotton Mixed, Polyester mixed

Dress shirts, blouses.

20°C

No choice

40°C

(Cold to 95°C)

Removes wrinkles within

20mins with steam.

Steam

Refresh

Cotton mixed, Polyester

mixed Dress shirts, blouses.

1 single size

This cycle is for large items

such as bed cover, pillows,

sofa covers, etc.

Cotton bedding except special

garments (delicates, wool, silk,

etc.) with filling: duvets, pillows,

blankets, sofa covers with light

filling.

Duvet

40°C

(Cold to 40°C)

Sports

Wear

This cycle is suitable for sports

wear such as jogging clothes

and running wear.

Less than

3.0 kg

Less than

7.0 kg

Coolmax, Gore-tex, fleece

and Sympatex.

Quick 30

This cycle provides fast washing

time for small loads and lightly

soiled clothes.

Coloured laundry which is

lightly soiled fast.

A small amount of laundry

which can be dried.

20°C

(Cold to 40°C)

Wool, hand washable clothes.

Delicate, easily damaged

laundry.

Stain

Care

Cotton blended fabrics.

NOT delicate clothes.

40°C

(30°C to 60°C)

20°C

(Cold to 30°C)

Less than

3.0 kg

Gentle

Care

This cycle is for hand and machine

washable delicate clothes such as

washable wool, lingerie, dresses etc.

(Please use detergent for machine

washable woolens).

Wash off several kinds of stain such

as wine, juice, dirt, etc.

(Water temperature is increased

step by step for washing various

stains.)

Less than

1.5 kg

Download

Cycle

For downloadable cycles.

If you did not download any cycles, ‘Rinse+Spin’ is set.

20

•

Water Temperature: Select water temperature to suit your chosen wash cycle.

Always follow garment manufacturer's care label or instructions when washing.

 Drying Program Table

Program Fabric type

Maximum Load

Eco ( )

Cupboard ( )

Normal Eco Dry ( )

Less than

3.0 kg

Less than

7.0 kg

Less than

7.0 kg

Less than

7.0 kg

Less than

0.5 kg

Less than

1.5 kg

Cotton or Linen Fabrics

such as cotton towels, t-shirts, linen laundries.

Cotton or Linen Fabrics, ready to iron at the end of cycle. Iron ( )

Easy Care Textiles, Synthetic Fabrics

Suitable for Easy care, Mix program washable clothes

Low Temp. ( )

Time 30 min. ( )

Time 60 min. ( )

Time 120 min. ( )

–

How to use washer

NOTE

• Neutral detergent is recommended.

• Select maximum selectable spin speed of washing programme to ensure the drying

result.

• Where the amount of laundry to be washed and dried in one programme does not

exceed the maximum weight permitted for the drying programme, washing and drying

in one continuous sequence is recommended.

Strona jest ładowana ...

LG FH4U1JBHK6N Instrukcja obsługi

LG FH4U1JBHK6N Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty