OPEN/CLOSE
C
D DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
CDR-S1000
OWNER’S MANUAL
MODE D’EMPLOI
Compact Disc Recorder
Lecteur/Enregistreur CD
UCA
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert you to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral
triangle is intended to alert you to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
OR MOISTURE.
1 Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2 Retain Instructions – The safety and operating
instructions should be retained for future reference.
3 Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and other
instructions should be followed.
5 Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a
swimming pool, etc.
6 Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the unit and cart combination
to overturn.
7 Wall or Ceiling Mounting – The unit should be mounted
to a wall or ceiling only as recommended by the
manufacturer.
8 Ventilation – The unit should be situated so that its
location or position does not interfere with its proper
ventilation. For example, the unit should not be situated
on a bed, sofa, rug, or similar surface, that may block
the ventilation openings; or placed in a built-in
installation, such as a bookcase or cabinet that may
impede the flow of air through the ventilation openings.
9 Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances
that produce heat.
10 Power Sources – The unit should be connected to a
power supply only of the type described in the operating
instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into
the inside of the unit.
15 Damage Requiring Service – The unit should be
serviced by qualified service personnel when:
A. The power-supply cord or the plug has been
damaged; or
B. Objects have fallen, or liquid has been spilled into
the unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing – The user should not attempt to service the
unit beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
17 Power Lines – An outdoor antenna should be located
away from power lines.
18 Grounding or Polarization – Precautions should be
taken so that the grounding or polarization is not
defeated.
IMPORTANT!
Please record the serial number of this unit in the space
below.
Model:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
CAUTION
RISK OF ELECTRIC SHOCK
DO␣ NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
SAFETY INSTRUCTIONS
FCC INFORMATION (for US customers only)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS
UNIT!
This product, when installed as indicated in the
instructions contained in this manual, meets FCC
requirements. Modifications not expressly approved by
Yamaha may void your authority, granted by the FCC, to
use the product.
2. IMPORTANT: When connecting this product to
accessories and/or another product use only high quality
shielded cables. Cable/s supplied with this product
MUST be used. Follow all installation instructions.
Failure to follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply
with the requirements listed in FCC Regulations, Part 15
for Class “B” digital devices. Compliance with these
requirements provides a reasonable level of assurance
that your use of this product in a residential environment
will not result in harmful interference with other
electronic devices.
This equipment generates/uses radio frequencies and, if
not installed and used according to the instructions found
in the users manual, may cause interference harmful to
the operation of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product
is found to be the source of interference, which can be
determined by turning the unit “OFF” and “ON”, please try
to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being
affected by the interference.
Utilize power outlets that are on different branch (circuit
breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead,
change the lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory
results, please contact the local retailer authorized to
distribute this type of product. If you can not locate the
appropriate retailer, please contact Yamaha Electronics
Corp., U.S.A. 6660 Orangethorpe Ave, Buena Park, CA
90620.
The above statements apply ONLY to those products
distributed by Yamaha Corporation of America or its
subsidiaries.
We Want You Listening For A Lifetime
YAMAHA and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your sensitive hearing. Since hearing damage from loud sounds is
often undetectable until it is too late, YAMAHA and the Electronic Industries Association’s Consumer
Electronics Group recommend you to avoid prolonged exposure from excessive volume levels.
E-1
INTRODUCTION
Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the
best performance, read this manual carefully. It will guide you in operating your YAMAHA product.
ENGLISH
FEATURES
• Playback of CD-R, CD-RW, and
Prerecorded CD Disc Formats
• Recording to CD-R and CD-RW Disc
Formats
• Remote Control Capability
• Car Sound Processing (Dynamic Range
Compression Recording)
• Sampling Rate Converter
• Synchronized Recording
• Digital Recording Level Adjustment
• 4 Times Speed Finalization
• 4 Times Speed Erase
• CD Direct Digital Input Recording
• Automatic and Manual Track Marking
• Optical and Coaxial Digital Input and
Output
• Random Access Programmable Play
• Single Track/Entire Disc Repeat Play
• Random-Sequence Play
• PHONES jack
• Adjustable Display Brightness
CONTENTS
PRECAUTIONS ..............................................2
DISCS COMPATIBLE WITH THIS UNIT .........3
GETTING STARTED.......................................4
Supplied accessories ............................................... 4
Notes on the transportation pad .............................. 4
The remote control ................................................. 5
Connections ............................................................ 6
NAMES OF BUTTONS AND CONTROLS .....8
Front panel.............................................................. 8
Display.................................................................... 8
Remote control ....................................................... 9
BASIC OPERATION .....................................10
Turning on the power and loading a disc ............. 10
Removing the disc and turning the power off ...... 11
Selecting a time display........................................ 11
RECORDING FUNCTIONS ..........................12
Recording modes .................................................. 12
Synchronized recording of a single track ............. 13
Synchronized recording of ALL tracks ................ 14
Synchronized recording with finalization ............ 15
Manual recording.................................................. 16
Setting the recording levels .................................. 17
Manual track marking........................................... 18
Recording directly from a source CD................... 18
Applying dynamic range compression
to a recording .................................................. 19
Finalization ........................................................... 20
Track and Disc Erase (CD-RW discs only) .......... 21
PLAYBACK FUNCTIONS .............................23
Playing a CD disc ................................................. 23
Searching for a track............................................. 24
Scanning forward or backward rapidly ................ 24
Program play ........................................................ 25
Random sequence play ......................................... 26
Repeat play ........................................................... 27
Index search.......................................................... 27
OTHER FUNCTIONS....................................28
Changing the brightness of the display ................ 28
Listening with headphones ................................... 28
ADDITIONAL INFORMATION ......................29
CD preventive care ............................................... 29
Display messages.................................................. 30
Troubleshooting.................................................... 31
SCMS copy protection ......................................... 32
CD-Recorder system notes and limitations .......... 33
Specifications ....................................................... 34
E-2
English
PRECAUTIONS: READ THIS BEFORE OPERATING THE UNIT
CAUTIONS
• To assure the finest performance, please read this
manual carefully. Keep it in a safe place for future
reference.
• Install your unit in a well ventilated, cool, dry, clean
place – away from windows, heat sources, vibration,
dust, moisture, or cold. To avoid humming sounds,
locate the unit away from other electrical appliances,
motors, and transformers. To prevent fire or electrical
shock, do not expose to rain and water.
• Do not operate the unit upside-down. It may overheat,
possibly causing damage.
• Never open the cabinet. If something drops into the set,
contact your dealer.
• Do not use force on switches, knobs or cords.
• When not planning to use this unit for long periods of
time (i.e., vacation, etc.), disconnect the AC power plug
from the wall outlet.
• Grounding or polarization – Precautions should be taken
so that the grounding or polarization of the unit is not
defeated.
• Do not clean the unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
• Be sure to read the “Troubleshooting” section on
common operating errors before concluding that your
unit is faulty.
• Do not place another component on top of this unit, as
damage or discoloration on the surface of the unit may
result.
• To prevent damage by lightning, disconnect the power
cord from the wall outlet during an electrical storm.
• When disconnecting the power cord from the wall
outlet, grasp the plug; do not pull the cord.
• Do not plug the AC power plug to the wall outlet before
you finish all connections.
• The voltage to be used must be the same as that
specified on this unit. Using this unit with a higher
voltage than that which is specified is dangerous and
may result in a fire or other type of accident causing
damage. YAMAHA will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
• Sudden temperature changes and storage or operation in
an extremely humid environment may cause
condensation inside the cabinet.
• When this unit is shipped, there is a protective pad in
the disc tray. For correct operation of this unit, remove
before use.
CAUTION FOR MOVING THE UNIT
Before moving the unit, first check that there is no
disc in the disc tray. To prevent malfunction of this
unit, be sure to insert the transportation pad in the
disc tray as described on page 4. Finally, press
POWER to turn the unit off, and disconnect the AC
power plug from the wall outlet.
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
As the laser beam used in this compact disc player is
harmful to the eyes, do not attempt to disassemble the
cabinet. Refer servicing to qualified personel only.
For Canadian Customers
To prevent electric shock, match wide blade of plug
to wide slot and fully insert.
This Class B digital apparatus complies with
Canadian ICES-003.
E-3
DISCS COMPATIBLE WITH THIS UNIT
Discs that can be used for recording
Be sure to use only CD-R and CD-RW discs made by
reliable manufacturers.
CD-R and CD-RW digital audio discs that display either
of the following marks can be used with this unit.
In addition to these marks being present on the disc, check
that at least one of the following phrases can also be
found on the disc or disc case.
FOR CONSUMER
FOR CONSUMER USE
FOR MUSIC USE ONLY
Regarding discs that can be used for recording
• CD-R discs can only be recorded on once, and the
recorded material cannot be erased.
• CD-RW discs can be recorded on, have the recorded
material erased, and then recorded on again any number
of times.
The following discs cannot be used for recording
on this unit.
• Discs bearing marks other than those shown above.
• Discs intended for recording computer data.
• Discs intended for professional use or labeled “FOR
PROFESSIONAL USE ONLY”.
Discs that can be played back
In addition to CD-R and CD-RW digital audio discs
described above, commercially available pre-recorded CD
discs bearing the mark shown below can also be played on
this unit.
Note
Please check the copyright laws in your country to
record from records, compact discs, radio, etc.
Recording of copyright material may infringe
copyright laws.
Finalization of CD-R discs for
playback on standard CD players
Although a partially recorded CD-R disc can be played on
this unit, it cannot be played on a standard CD player until
it has undergone a process known as “finalization”. In the
finalization process, the Table of Contents (TOC) is
written onto the disc and further recording is not possible.
However, this process makes it possible to play a CD-R
disc on a standard CD player.
Some CD players may not play back the finalized CD-R
discs properly due to differences in the playback system
of different manufacturers.
See page 20 for more information on finalization.
Playback of CD-RW discs
Please note that even after a CD-RW disc has been
finalized, it still cannot be played on a standard CD
player. CD-RW discs can only be played back on CD-RW
compatible players such as this unit.
Additionally, CD-RW discs can be erased even after
finalization has been performed, and recorded onto again.
See pages 21 and 22 for more information on erasing
recordings.
Playback on DVD players
Before playing back a finalized CD-R or CD-RW discs on
a DVD player, please check whether the DVD player is
compatible with CD-R or CD-RW discs or not. Refer to
the owner's manual of the DVD player for more
information. If the DVD player is not compatible with
CD-R or CD-RW discs, do not attempt to play them on
the DVD player.
Regarding erasure or loss of data
Yamaha and suppliers accept no liability for the loss of
data or any problems caused as a result. As a precaution,
it is recommended that the discs are tested after they have
been written to. Furthermore, under no circumstances
does Yamaha and suppliers guarantee the reliability of the
discs.
IMPORTANT
•Small scratches, fingerprints, dust, foreign
substances, or direct sunlight on the recorded
surface of the disc may aversely affect the disc's
ability to record and play back properly.
•Be sure to use a felt-tip pen or similar writing tool
when writing on the label side of the disc. Do not
use a ball-point pen, pencil, or other hard-tipped
writing tool, as these may damage the disc and
may aversely affect further recording on the disc.
•Be sure to read “CD preventive care” on page 29
for information on the proper care and handling of
CD discs.
E-4
English
• Batteries (size AA, UM-3, R6) (2)
• RCA Pin Cables (2)
• Optical Fiber Cable
GETTING STARTED
Supplied accessories
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH
SKIP
ERASE REC
REC MUTE
123
456
789
+10
0
INDEX
REPEAT RANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE
DIMMER DISPLAY
OPEN/
CLOSE
After unpacking, check that the following parts are
contained.
• Remote Control
Notes on the transportation pad
Before using the unit
This unit is shipped with a transportation pad inserted in
the disc tray to prevent impact to the internal mechanism
that could occur during transportation. Before using this
unit, press POWER on the front panel to turn the power
on, press
OPEN/CLOSE (OPEN/CLOSE on the
remote) to open the disc tray, and remove the pad.
Storing the transportation pad
It is recommended to use the transportation pad whenever
the unit is moved. Therefore, store the transportation pad
for future transportation of the unit.
Installing the transportation pad
1 Press POWER on the front panel to turn the power
on.
2 Press OPEN/CLOSE (OPEN/CLOSE on the
remote) to open the disc tray.
3 Place the transportation pad in the disc tray.
4 Press OPEN/CLOSE (OPEN/CLOSE on the
remote) to close the disc tray.
• If a portion of the transportation pad remains out of
the unit, push gently to slide it into the unit.
5 Press POWER on the front panel to turn the power
off.
E-5
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
30°
30°
Battery replacement
If you find that the remote control must be used closer to
the main unit than usual, the batteries are weak. Replace
batteries with new ones.
Notes
• Use only AA, UM-3, R6 batteries for replacement.
• Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
• Remove the batteries if the remote control will not be used for
an extended period of time.
• If batteries leak, dispose of them immediately. Avoid touching
the leaked material or letting it come in contact with clothing,
etc. Clean the battery compartment thoroughly before
installing new batteries.
Remote control
sensor
The remote control
Loading the batteries for the remote control Remote control operation range
Notes
• There should be no large obstacles between the remote control
and the main unit.
• If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp, etc.),
it might cause the remote control not to work correctly. In this
case, reposition the main unit to avoid direct lighting.
Within approximately
6 m (20 feet)
1
3
2
GETTING STARTED
E-6
English
Connections
GETTING STARTED
Digital connections using the DIGITAL OPTICAL and COAXIAL jacks
• Before using the DIGITAL OPTICAL jacks, be sure to remove the jack covers. Replace the jack covers in order to
protect the jacks from dust when they are not being used.
• Make connections from the DIGITAL OPTICAL jacks on this unit to the “MD/DAT” (or equivalent) digital optical jacks
on an amplifier or receiver by using optical fiber cables.
• Make connections from the DIGITAL COAXIAL jacks on this unit to the “MD/DAT” (or equivalent) digital coaxial
jacks on an amplifier or receiver by using commercially available coaxial cables.
* Do not connect the digital audio coaxial cable to analog line jacks. If connection is made, noise will be produced.
Do not plug in this unit or other components until all connections are completed.
• Connections should be made to the correct input and output jacks of the amplifier or other components.
• To record a wider variety of sources, it is recommended to make both analog and digital connections to this unit.
• Arrow marks (
) in the illustration below indicate the direction of the audio signal.
• Guidelines for making both analog and digital connections to this unit are outlined on this and the following page.
• When all connections are complete, plug in this unit to a wall outlet.
ANALOG
LINE IN
REC
4
L
PLAY
3
LINE OUT
R
L
R
DIGITAL IN
COAXIAL OPTICAL
DIGITAL OUT
COAXIAL OPTICAL
MD/DAT
MD/
DAT
MD/
DAT
PLAY
RL
REC
DIGITAL IN DIGITAL OUT
OPTICAL OPTICAL
COAXIAL COAXIAL
To wall
outlet
Amplifier or Receiver
RCA pin cable
(included)
<CDR-S1000>
RCA pin cable
(included)
Optical fiber cables
(one included)
Coaxial cables
(not included)
Continued on next page
E-7
GETTING STARTED
INPUT
OPTICAL
COAXIAL ANALOG
Analog connections using the LINE IN and OUT jacks
• Be sure that the left (“L”) and right (“R”) LINE IN (REC) and LINE OUT (PLAY) jacks are connected correctly.
• Connect the LINE IN (REC) and LINE OUT (PLAY) jacks to the “MD/DAT” (or equivalent) jacks of the amplifier or
receiver. For additional details concerning these connections, refer to the operating instructions for the amplifier being
used.
• Be sure to connect the LINE OUT (PLAY) jacks on this unit to the LINE IN (PLAY) jacks on the amplifier, and
similarly the LINE IN (REC) jacks on this unit to the LINE OUT (REC) jacks on the amplifier.
• The LINE IN (REC) and LINE OUT (PLAY) jacks of this unit are numbered 4 and 3 respectively. When connecting
this unit with a YAMAHA amplifier or receiver whose jacks on the rear panel are numbered as 1, 2, 3, etc., connect
the LINE IN (REC) and LINE OUT (PLAY) jacks of this unit to the input jacks numbered 4 and 3 on the rear of the
amplifier or receiver.
To select an input source using INPUT on the front panel
With this recorder, it is possible to make analog, digital optical, and digital coaxial connections. When recording, use
INPUT on the front panel to select which of the three types of signal to input.
• When recording a digital source, set INPUT to OPTICAL to record the digital signal input from the DIGITAL IN
OPTICAL jack.
• When recording a digital source, set INPUT to COAXIAL to record the digital signal input from the DIGITAL IN
COAXIAL jack.
• When recording an analog source, set INPUT to ANALOG to record the signal input from the LINE IN jacks.
• This recorder outputs both analog and digital signals simultaneously regardless of the INPUT setting. Please refer to the
instructions supplied with the amplifer, etc. for details on how to select the preferred signal type.
• When INPUT is set to either OPTICAL or COAXIAL, the sampling rate indicator corresponding to the digital sampling
rate of the input source signal lights in the display.
E-8
English
Display
Front panel
~ POWER (P.10/P.11)
Ÿ TRACK NO. (P.18)
! EFFECT (P.19)
⁄ REC MODE (P.13 to P.15)
@ Remote control sensor (P.5)
¤ Display (P.11)
# CD DIRECT (P.18)
‹ REC MUTE (P.16)
$ REC (P.13 to P.16)
› INPUT (P.7)
% REC LEVEL DIGITAL/ANALOG (P.17)
~ PROG indicator (P.25)
Ÿ Sampling rate indicators (P.7)
! Disc format indicator (P.13 to P.16)
⁄ TOTAL/REMAIN indicators (P.11)
@ EFFECT indicator (P.19)
¤ REC indicator (P.13 to P.16)
# * indicator (P.13 to P.16/P.23)
‹ # indicator (P.11/P.23)
NAMES OF BUTTONS AND CONTROLS
CD-RW
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
fi& (Stop) (P.23)
^ LEVEL (P.28)
fl PHONES (P.28)
& ^ (Play/Pause) (P.23)
‡ $/! ⁄/› (Skip/Search) (P.24)
* OPEN/CLOSE (P.4/P.10/P.11)
° Disc tray (P.4/P.10/P.11)
( DISPLAY (P.11)
· ERASE (P.21/P.22)
) FINALIZE (P.20)
$ Multi-information display (P.11)
› Level indicator (P.17)
% TOC indicator (P.20/P.22)
fi SYNC indicator (P.13 to P.15)
^ SINGLE/ALL/AUTO indicators (P.13 to P.15)
fl REPEAT S/F indicators (P.27)
& RNDM indicator (P.26)
E-9
Remote control
~ RANDOM (P.26)
Ÿ TRACK NO. WRITE (P.18)
! REC MODE (P.13 to P.15)
⁄ EFFECT (P.19)
@ REPEAT (P.27)
¤ Numeric buttons (P.23/P.25/P.27)
# FINALIZE (P.20)
‹ ERASE (P.21/P.22)
$ ! SEARCH ⁄ (P.24)
› STOP & (P.23)
% PAUSE * (P.23)
fi DIMMER (P.28)
^ DISPLAY (P.11)
fl OPEN/CLOSE (P.4/P.10/P.11)
& CLEAR (P.25/P.26)
‡ PROG (P.25/P.26)
* INDEX (P.27)
° REC MUTE (P.16)
( REC (P.13 to P.16)
· $ SKIP › (P.24)
) PLAY # (P.23)
NAMES OF BUTTONS AND CONTROLS
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH
SKIP
ERASE REC
REC MUTE
123
456
789
+10
0
INDEX
REPEAT RANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE
DIMMER DISPLAY
OPEN/
CLOSE
E-10
English
BASIC OPERATION
To load a disc
1 Press POWER on the front panel to turn the power
on.
2 Press OPEN/CLOSE (OPEN/CLOSE on the
remote) to open the disc tray.
3 Load a disc using the disc guide to align the disc
correctly in the disc tray.
• When loading a prerecorded CD disc, load the disc
with the label side up.
• When loading a CD-R or CD-RW disc for
recording, load with the recordable side down.
4 Press OPEN/CLOSE (OPEN/CLOSE on the
remote) to close the disc tray.
5 Select the function you want.
• For disc recording functions, see pages 12 to 20.
• For disc playback functions, see pages 23 to 27.
To load an 8 cm (3 in.) CD disc
Place it in the inner recessed area of the disc tray. Do not
put a normal 12 cm (5 in.) CD disc on top of an 8 cm (3
in.) CD disc.
Note
• You can also close the disc tray by pressing the front edge of
the disc tray gently. Play begins automatically if the tray is
closed by pressing ^ on the front panel or PLAY #, a
numeric button, or RANDOM on the remote. However, the
display will not show the total number of tracks or the total
recorded time of the disc.
When a disc is loaded
When a disc is loaded in the recorder, the recorder
performs a number of internal operations to determine the
format and content of the disc. During this time,
“Reading” appears in the display. This process requires
approximately 10 seconds to complete for any type of
disc.
When a new CD-R or CD-RW disc is loaded in the
recorder, OPC (Optimum Power Calibration) is usually
performed as well. OPC optimizes the laser power to the
reflectivity of the disc. During this time, “OPC Adjust”
appears in the display. This process requires an additional
15 seconds to complete. Recording is not possible until
these operations are complete.
After the disc has been read and any necessary internal
adjustments have been performed, one of the following
displays appear, and normal operation of the recorder is
possible.
A prerecorded audio CD disc is loaded in the recorder.
A CD-R or CD-RW disc that has not yet been recorded on
is loaded in the recorder.
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH
SKIP
ERASE REC
REC MUTE
123
456
789
+10
0
INDEX
REPEAT RANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE
DIMMER DISPLAY
OPEN/
CLOSE
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
Turning on the power
and loading a disc
OPEN/CLOSE
OPEN/CLOSEPOWER
CD-R
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
TOTAL
REMAIN
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
CD
R
dB
L
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
AUTO
TOC
R
dB
L
SF
32
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
E-11
BASIC OPERATION
Important
Do not turn off the power during finalization of a
CD-R or CD-RW disc (after recording). Doing so may
result in a misoperation in which recorded material
may be lost and further recording on the disc made
impossible. For more information on finalization of
CD-R and CD-RW discs, please see page 20.
Elapsed time of the track now playing
Remaining time of the track now playing
Total disc play time
Total remaining time on the disc
You can change the disc information that is shown in the
display by pressing DISPLAY. Each time DISPLAY is
pressed, the display changes as follows.
When a disc is playing
When a disc is being recorded
Selecting a time display
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
CD-R
CD TOTAL
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
Removing the disc and
turning the power off
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH
SKIP
ERASE REC
REC MUTE
123
456
789
+10
0
INDEX
REPEAT RANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE
DIMMER DISPLAY
OPEN/
CLOSE
POWER OPEN/CLOSE
OPEN/CLOSE
Elapsed time of the track being recorded
Total remaining recording time on the disc
Total time recorded on the disc
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
32 44 48
1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
CD-R
TOTAL
REMAIN
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
CD-R
CD
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
32 44 481
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
1Press OPEN/CLOSE (OPEN/CLOSE on the
remote) to open the disc tray and remove the disc.
• If a disc is playing, playback is stopped
automatically, and then the disc tray opens.
2 Press OPEN/CLOSE (OPEN/CLOSE on the
remote) again to close the disc tray.
3 Press POWER on the front panel to turn the power
off.
E-12
RECORDING FUNCTIONS
English
Recording modes
This recorder features a number of recording modes
allowing you to make recordings from a wide variety of
program sources (both analog and digital).
• When using this unit to make recordings, subcode
information that may be present in the source audio
signal such as CD TEXT, index data, etc., will not be
recorded.
Before recording
•
Set your amplifier or receiver to the source to be recorded.
•
Check that INPUT on the front panel is set appropriately
for the source to be recorded as described on page 7.
About the recording modes
Synchronized recording is recommended when making a
digital recording from a CD or MD, etc.
Manual recording is recommended when making an
analog recording.
Single track synchronized recording
After recording a single track, the unit is put in the record
pause mode. This mode is convenient for recording a mix
of tracks from different sources. See page 13 for this
procedure.
ALL track synchronized recording
When the source component starts to play, all tracks are
recorded and the recording automatically stops after the
last track. This mode is convenient for recording an entire
CD, DAT, MD or LP, etc. See page 14 for this procedure.
Full AUTO synchronized recording
This mode automatically finalizes the disc after ALL track
synchronized recording. See page 15 for this procedure.
Manual recording
This recording mode is used mainly when manual control
of the recording is required or preferred. Recording is
started and stopped manually. See page 16 for this
procedure.
IMPORTANT
•Do not turn off the power during recording. If the
power is turned off, recorded material may be lost
and the disc may not perform normally.
•If a power failure occurs or if the power cord is
pulled out of the wall outlet while recording on a
CD-RW disc, any material recorded before the
information is written to the PMA (Program
Memory Area) will be lost and left unrecorded.
When using a CD-R disc, the disc will no longer
be usable.
•During recording, make sure that the recorder is
not subjected to shock or vibration as this may
cause skips or jumps to be included in the
recording.
In the following cases recording is NOT possible
• When the CD indicator is lit indicating that a CD disc
or finalized CD-R disc is loaded in the recorder.
• When the CD-RW and TOC indicators are lit indicating
that a finalized CD-RW disc is loaded in the recorder.
• When there is no recording time remaining on the disc
and “Disc Full” appears in the display.
•
When 99 tracks have been recorded and “Track Full” appears
in the display. Only 99 tracks may be recorded on a CD disc.
• When the CD-R or CD-RW disc loaded in the recorder
is not intended for recording audio and “Not Audio”
appears in the display.
Notes
• If a source component connected to the DIGITAL IN jacks on
this unit is recorded by another recording device connected to
the DIGITAL OUT jacks on this unit, the recording function
may not perform correctly.
•
Depending on the source component, recording may not always
be possible when using the digital input jacks on this unit.
When recording onto a partially
recorded disc
If a CD-R or CD-RW disc has some recording time
remaining on it before finalization is performed, any of
the recording modes can be performed as normal.
Recording is automatically started from the location
immediately after the last recorded track on the disc.
Before CD-R discs can be played on
standard CD players – Finalization
When you have finished recording on a CD-R disc, it is
necessary to finalize the disc to make it compatible with
standard CD players. If this procedure is not performed, the
CD-R disc will not be playable on a standard CD player.
•
If Full AUTO synchronized recording is performed, finalization
is automatically performed following the conclusion of recording.
Notes for synchronized recording
•When performing synchronized recording of a
Video CD (audio portion only), the synchronized
recording function may not work correctly
depending on the source component being used to
play the Video CD.
•
Depending on the operation of the DVD player, this
unit may not stop the synchronized recording although
20 seconds of silence is continued. In this case, press
&
(STOP
&
on the remote) to stop this unit.
•Extremely low level signals will not be recognized
during analog input signal recording and will be
treated as silence. Be aware of low level signals
during synchronized recording.
•Although it takes less than 100 msec to detect
input signals in the synchronized recording mode,
this unit may not record the first portion of input
signals depending on discs. In this case, select the
syncronized recording mode after the manual
recording is started.
E-13
RECORDING FUNCTIONS
This is a recording mode suitable for compiling single
tracks from different audio sources. A new track marker is
automatically placed at the start of the track.
Synchronized recording
of a single track
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH
SKIP
ERASE REC
REC MUTE
123
456
789
+10
0
INDEX
REPEAT RANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE
DIMMER DISPLAY
OPEN/
CLOSE
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
INPUT
REC MODE
&
REC MODE
STOP &
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
REC
REC
4 Adjust the recording level as described on page 17.
• The recording level of digital and analog sources
can be adjusted.
• Start playing the source to set the recording level.
When the recording level is set, stop playback of
the source component.
• The recording level cannot be changed when the
CD DIRECT function is on.
5 Ensure that the source is in pause or stop mode, as
synchronized recording cannot be started if the
source is playing.
• Confirm the correct track is selected before
proceeding to the next step.
6 Press REC MODE once.
• The SINGLE and SYNC indicators light in the
display.
7 Start playing the source.
• The unit starts recording automatically when it
detects an audio signal.
• When the track being recorded ends, “Standby”
blinks in the display while information is being
written to the PMA (Program Memory Area) and
the unit is put in the record pause mode.
8 To record another track, repeat steps 5, 6, and 7.
9 After recording is complete, press & (STOP & on the
remote) to cancel recording and put the unit in the
stop mode.
When you are finished recording, follow the
finalization procedure described on page 20.
1 Load a CD-R or CD-RW disc containing space for
recording.
• To ensure proper recording, make sure that you
have more than enough space on the disc.
2 Press REC.
• This unit enters record pause mode.
3 Set INPUT on the front panel to the appropriate input
to be used for recording.
E-14
RECORDING FUNCTIONS
English
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH
SKIP
ERASE REC
REC MUTE
123
456
789
+10
0
INDEX
REPEAT RANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE
DIMMER DISPLAY
OPEN/
CLOSE
Synchronized recording
of ALL tracks
This is a recording mode suitable for recording all of the
material from a single audio source such as a CD, MD,
cassette, or LP. Track markers are automatically placed
between the tracks being recorded.
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
INPUTREC MODE
REC MODE
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
REC
REC
4 Adjust the recording level as described on page 17.
• The recording level of digital and analog sources
can be adjusted.
• Start playing the source to set the recording level.
When the recording level is set, stop playback of
the source component.
• The recording level cannot be changed when the
CD DIRECT function is on.
5 Ensure that the source is in pause or stop mode, as
synchronized recording cannot be started if the
source is playing.
6 Press REC MODE twice.
• The ALL and SYNC indicators light in the display.
7 Start playing the source.
• The unit starts recording automatically when it
detects an audio signal.
• When making a digital recording, a new track
marker is placed each time a new track begins on
the source component.
• Depending on the source component, a new track
marker may not always be placed correctly. When
this occurs, use the manual track marking function.
• When making an analog recording, spaces of
silence are interpreted as track separations, and a
new track marker is automatically placed when a
new audio signal is detected. The silence should be
about 4 seconds long. Automatic track marking
may not be performed properly if the recording
source has excessive noise or contains a lot of low
level sounds. In this case, we recommend manual
recording as described on page 16.
• Once the unit has recorded 20 seconds of
continuous silence, recording ends and “Wait”
blinks in the display while information is being
written to the PMA (Program Memory Area). After
this is complete, the unit is put in the stop mode.
• When making a recording using the program
playback function of the source component, make
sure that the space between each track is under 10
seconds.
When you are finished recording, follow the
finalization procedure described on page 20.
1 Load a CD-R or CD-RW disc containing space for
recording.
• To ensure proper recording, make sure that you
have more than enough space on the disc.
2 Press REC.
• This unit enters record pause mode.
3 Set INPUT on the front panel to the appropriate input
to be used for recording.
E-15
RECORDING FUNCTIONS
The Full AUTO synchronized recording mode
automatically performs finalization after ALL track
synchronized recording (described on the previous page).
Finalization is the final process in recording a CD-R disc
that makes it playable on standard CD players. (CD-RW
discs can only be played back on a CD-RW compatible
player, even if finalization is performed.) Refer to page 20
for more information on finalization.
Synchronized recording
with finalization
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH
SKIP
ERASE REC
REC MUTE
123
456
789
+10
0
INDEX
REPEAT RANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE
DIMMER DISPLAY
OPEN/
CLOSE
&
REC MODE
REC MODE
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
INPUTREC
REC
STOP &
4 Adjust the recording level as described on page 17.
• The recording level of digital and analog sources
can be adjusted.
• Start playing the source to set the recording level.
When the recording level is set, stop playback of
the source component.
• The recording level cannot be changed when the
CD DIRECT function is on.
5 Ensure that the source is in pause or stop mode, as
synchronized recording cannot be started if the
source is playing.
6 Press REC MODE three times.
• The AUTO and SYNC indicators light in the
display.
7 Start playing the source.
• The unit starts recording automatically when it
detects an audio signal.
8 Once the unit has recorded 20 seconds of continuous
silence, recording ends and “Wait” blinks in the
display while information is being written to the
PMA (Program Memory Area). After this is
complete, finalization begins automatically.
• In the Full AUTO synchronized recording mode,
the finalization process following the end of
recording can be canceled by pressing & (STOP &
on the remote) during the 20 seconds of silence at
the end of the recording. If this is done, however, it
will be necessary to perform finalization as
described on page 20.
• When making a recording using the program
playback function of the source component, make
sure that the space between each track is under 10
seconds.
• Operation buttons do not respond once finalization
has begun.
• Never turn the power off during finalization!
• System operation stops automatically without
performing finalization when there is no more
recording time or when 99 tracks have already been
recorded.
1 Load a CD-R or CD-RW disc containing space for
recording.
• To ensure proper recording, make sure that you
have more than enough space on the disc.
2 Press REC.
• This unit enters record pause mode.
3 Set INPUT on the front panel to the appropriate input
to be used for recording.
E-16
RECORDING FUNCTIONS
English
This is a recording mode used when manual control of the
recording is required or preferred.
(Please note that synchronized recording (single or ALL)
is recommended when making a digital recording from
CD or MD, etc.)
Manual recording
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
EFFECT
FINALIZE
STOP PAUSE PLAY
SEARCH
SKIP
ERASE REC
REC MUTE
123
456
789
+10
0
INDEX
REPEAT RANDOM CLEAR PROG
REC MODE
TRACK NO.
WRITE
DIMMER DISPLAY
OPEN/
CLOSE
CD-R
CD TOTAL
REMAIN
PROG
RNDM
REPEAT
SINGLE
EFFECT
REC
ALL
AUTO SYNC
TOC
X2 X4
R
dB
L
SF
32 44 48.1
–
60 30 10 6 4 2 1 0 OVER00
––– ––––
REC MUTE REC INPUT
&
^
REC MUTE
REC
STOP &
PAUSE *
PLAY #
4 Adjust the recording level as described on the
following page.
• The recording level of digital and analog sources
can be adjusted.
• Start playing the source to set the recording level.
When the recording level is set, stop playback of
the source component.
• The recording level cannot be changed when the
CD DIRECT function is on.
5 Press ^ (PAUSE * or PLAY # on the remote) to
start recording.
6 Start playing the source.
7 After recording is complete, press & (STOP & on the
remote) to stop recording.
• “Wait” blinks in the display while information is
being written to the PMA (Program Memory Area).
To pause during recording
Press ^ (PAUSE * on the remote) to pause recording
temporarily. “Standby” blinks in the display while
information is being written to the PMA (Program
Memory Area).
To resume recording, press ^ (PAUSE * or PLAY #
on the remote).
To record blank space at the end of a
track
Press REC MUTE.
A 4-second blank space is recorded, and the unit
automatically enters the record pause mode.
• The REC indicator blinks while blank space is being
recorded.
• You can create blank spaces longer than 4 seconds by
pressing and holding REC MUTE. The unit is put in
the record pause mode when the button is released.
• REC MUTE cannot be used when the record pause
mode is activated from the stop mode.
When you are finished recording, follow the
finalization procedure described on page 20.
1 Load a CD-R or CD-RW disc containing space for
recording.
• To ensure proper recording, make sure that you
have more than enough space on the disc.
2 Press REC.
• This unit enters record pause mode.
3 Set INPUT on the front panel to the appropriate input
to be used for recording.
E-17
RECORDING FUNCTIONS
Setting the digital recording level
The volume level of digital audio sources is often similar,
however, level differences may be quite obvious between
different digital audio sources and even between one
recording and another. To maintain a consistent recording
level in CD recordings, it is possible to change the volume
of the input digital signal.
• Please note that the digital recording level cannot be
adjusted when the CD DIRECT function is on (the CD
DIRECT indicator is lit on the front panel).
To select the digital signal to be recorded, set INPUT to
the appropriate digital input (OPTICAL or COAXIAL).
To set the digital recording level, play the digital source to
be recorded during record or record pause mode, and turn
REC LEVEL DIGITAL/ANALOG to adjust the volume
of the digital signal to a level that sounds appropriate. The
digital volume can be adjusted up to a MAX of +12 dB
and down to a MIN of –12 dB from the center position of
0 dB, the level of the input digital signal.
Notes
• Although some sources can be recorded with lower peak
levels, setting the peak levels too low may degrade the quality
of the recording.
• By pressing CD DIRECT (the CD DIRECT indicator lights on
the front panel), the digital level is automatically set to that of
the CD disc being recorded, and turning REC LEVEL
DIGITAL/ANALOG has no effect.
L
R
dB
–
60 30 10 6 4 2 1 0 OVER00
––– – ––
Should not light
Setting the
recording levels
NATURAL SOUND CD RECORDER CDR-S1000
POWER
FINALIZE ERASE DISPLAY
TRACK NO.
EFFECT
REC MODE
OPEN/CLOSE
CD DIRECT
REC
INPUT
PHONES
REC LEVEL
LEVEL
DIGITAL/ANALOG
MIN MAX
010
OPTICAL
COAXIAL ANALOG
REC
MUTE
/
//
INPUT
REC LEVEL
DIGITAL/ANALOG
Setting the analog recording level
To select the analog signal, set INPUT to ANALOG.
Turn REC LEVEL DIGITAL/ANALOG during record or
record pause mode to adjust the analog recording level.
For best results, play the loudest passage of the source to
be recorded and watch the recording level meter in the
display. Adjust REC LEVEL DIGITAL/ANALOG so
that the highest peak causes the 0 dB level indicators to
flicker. Do not set the recording level so that the OVER
indicators light as it may produce distortion in the audio
signal.
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
Strona się ładuje...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
Yamaha CDRS1000 Instrukcja obsługi
- Kategoria
- Tuner
- Typ
- Instrukcja obsługi
w innych językach
- čeština: Yamaha CDRS1000 Uživatelský manuál
- español: Yamaha CDRS1000 Manual de usuario
- italiano: Yamaha CDRS1000 Manuale utente
- Deutsch: Yamaha CDRS1000 Benutzerhandbuch
- svenska: Yamaha CDRS1000 Användarmanual
- português: Yamaha CDRS1000 Manual do usuário
- français: Yamaha CDRS1000 Manuel utilisateur
- Türkçe: Yamaha CDRS1000 Kullanım kılavuzu
- English: Yamaha CDRS1000 User manual
- dansk: Yamaha CDRS1000 Brugermanual
- русский: Yamaha CDRS1000 Руководство пользователя
- suomi: Yamaha CDRS1000 Ohjekirja
- Nederlands: Yamaha CDRS1000 Handleiding
- română: Yamaha CDRS1000 Manual de utilizare
Powiązane artykuły
-
Yamaha CDR-HD1300 Instrukcja obsługi
-
-
-
-
-
-
Yamaha NX-S100S Instrukcja obsługi
-
-