Indesit DFP 58T1 C NX EU instrukcja

Kategoria
Zmywarki
Typ
instrukcja
DFP 58T1
EN
English
Operating instructions
DISHWASHER - Contents
Operating instructions, 1
Precautions and advice, 2-3
Product Data, 8
Assistance, 10
Installation, 11-12
Description of the appliance, 13
Refined salt and rinse aid, 14
Loading the racks, 15-16
Detergent and dishwasher use, 17
Wash cycles, 18
Special wash cycles and options, 19
Care and maintenance, 20
Troubleshooting, 21
PL
Polski
Instrukcja obsługi
ZMYWARKA - Spis treści
Instrukcja obsługi, 1
Zalecenia i środki ostrożności, 4-5
Karta produktu, 9
Serwis Techniczny, 10
Instalacja, 33-34
Opis urządzenia, 35
Sól regeneracyjna i środek nabłyszczający, 36
Ładowanie koszy, 37-38
Środek myjący i obsługa zmywarki, 39
Programy, 40
Programy specjalne i opcje, 41
Konserwacja i obsługa, 42
Nieprawidłowe działanie i możliwe środki zaradcze, 43
ES
Español
Manual de instrucciones
LAVAVAJILLAS - Índice
Instrucciones de uso, 1
Precauciones y consejos, 3-4
Ficha producto, 8
Asistencia, 10
Instalación, 22-23
Descripción del aparato, 24
Sal regeneradora y abrillantador, 25
Cargar los cestos, 26-27
Detergente y uso del lavavajillas, 28
Programas, 29
Programas especiales y opciones, 30
Mantenimiento y cuidados, 31
Anomalías y soluciones, 32
BG
Български
Инструкция за експлоатация
СЪДОМИЯЛНА МАШИНА - Съдържание
Инструкция за експлоатация, 1
Предпазни мерки и съвети, 5-6-7
Продуктов фиш, 9
Помощ, 10
Инсталиране, 44-45
Описание на уреда, 46
Регенерираща сол и гланц, 47
Зареждане на кошниците, 48-49
Миещ препарат и експлоатация на съдомиялната машина, 50
Програми, 51
Специални програми и опции, 52
Грижи и поддръжка
, 53
Отстраняване на неизправности
, 54
2
EN
Precautions and advice
This appliance was designed and
manufactured in compliance with international
safety standards. The following information
has been provided for safety reasons and
should be read carefully.
Keep this instruction manual in a safe place
for future reference. If the appliance is sold,
given away or moved, make sure the manual
is kept with the machine.
Read the instructions carefully, as they
include important information on safe
installation, use and maintenance.
This appliance was designed for domestic
use or similar applications, for example:
- farmhouses;
- use by guests in hotels, motels and other
residential settings;
- bed & breakfasts.
Remove the appliance from all packaging
and make sure it was not damaged during
transportation. If it was damaged, contact
the retailer and do not proceed any further
with the installation process.
General safety
This appliance should not be operated
by children younger than 8 years, people
with reduced physical, sensory or mental
capacities, or inexperienced people
who are not familiar with the product,
unless they are given close supervision
or instructions on how to use it safely and
are made aware by a responsible person
of the dangers its use might entail.
Children must not play with the appliance.
It is the user's responsibility to clean and
maintain the appliance. Children should
never clean or maintain it unless they are
given supervision.
The appliance was designed for domestic
use inside the home and is not intended
for commercial or industrial use.
The appliance must be used to wash
domestic crockery in accordance with the
instructions in this manual.
The appliance must not be installed
outdoors, even in covered areas. It is
extremely dangerous to leave the machine
exposed to rain and storms.
Do not touch the appliance when barefoot.
When unplugging the appliance always
pull the plug from the mains socket. Do
not pull on the cable.
The water supply tap must be shut off
and the plug should be removed from
the electrical socket at the end of every
cycle and before cleaning the appliance
or carrying out any maintenance work.
The maximum number of place settings is
shown in the product sheet.
If the appliance breaks down, do not under
any circumstances touch the internal parts
in an attempt to perform the repair work
yourself.
Do not lean or sit on the open door: this
may cause the appliance to overturn.
The door should not be left open as it may
create a dangerous obstacle.
Keep detergent and rinse aid out of reach
of children.
The packaging material should not be
used as a toy.
Knives and other utensils with sharp
edges must be placed either with the
points/blades facing downwards in the
cutlery basket or horizontally on the tip-up
compartments or in the tray/third basket,
if available.
Connect the appliance to the water mains
using the new supply hose provided with
the appliance. Do not re-use the old hose.
Install the back side of a free-standing
dishwasher against a wall.
Disposal
To dispose of any packaging materials,
follow local legislation so that the
packagings may be reused.
The European Directive 2012/19/EU
relating to Waste Electrical and Electronic
Equipment (WEEE) states that household
appliances should not be disposed of
using the normal solid urban waste cycle.
Exhausted appliances should be collected
separately in order to optimise the cost of
reusing and recycling the materials inside
the machine, while preventing potential
damage to the atmosphere and public
health. The crossed-out dustbin symbol
shown on all products reminds the owners
of their obligations regarding separated
waste collection.
For further information relating to the correct
disposal of household appliances, owners
may contact the relevant public authority or
the local appliance dealer.
3
Saving energy and respecting the
environment
Saving water and energy
Only begin a wash cycle when the
dishwasher is full. While waiting for the
dishwasher to be filled, prevent unpleasant
odours with the Soak cycle
(if available, see
Wash Cycles).
Select a wash cycle that is suited to the
type of crockery and to the soil level using
the Table of Wash Cycles:
- For dishes with a normal soil level, use
the Eco wash cycle, which guarantees low
energy and water consumption levels.
- If the load is smaller than usual activate
the Half Load option
(see Special wash cycles
and options, if available).
If your electricity supply contract gives
details of electricity-saving time bands, run
the wash cycles when electricity prices are
lower. The Delayed Start option can help
you organise the wash cycles accordingly
(see Special wash cycles and options, if available).
ES
Precauciones y consejos
El aparato ha sido proyectado y fabricado
en conformidad con las normas internacionales
de seguridad Estas advertencias se
suministran por razones de seguridad y
deben ser leídas atentamente.
Es importante conservar este manual para
poder consultarlo en cualquier momento. En
caso de venta, de cesión o de traslado, el
manual debe permanecer junto al aparato.
Lea atentamente las instrucciones: contienen
información importante sobre la instalación,
sobre el uso y sobre la seguridad.
Este aparato ha sido proyectado para uso
doméstico y para aplicaciones similares, por
ejemplo:
- cortijos;
- uso por parte de clientes en hoteles, moteles
y otros ambientes de tipo residencial;
- bed and breakfast.
Desembalar el aparato y comprobar que no
haya sufrido daños durante el transporte. Si
estuviera dañado, no conectarlo; llamar al
revendedor.
Seguridad general
Este electrodoméstico puede ser utilizado
por niños de no menos de 8 años de
edad y por personas con capacidades
físicas, sensoriales o mentales reducidas, o
carentes de experiencia o del conocimiento
necesario, pero sólo bajo la estricta
vigilancia de una persona responsable,
siguiendo las instrucciones sobre el uso
seguro y después de comprender bien los
peligros inherentes.
Los niños no deben jugar con el aparato.
La limpieza y el mantenimiento del aparato
deben ser efectuados por el usuario.
No deben ser efectuados por niños sin
vigilancia.
El aparato ha sido fabricado para un uso
de tipo no profesional en el interior de una
vivienda.
El aparato debe ser utilizado para el lavado
de vajilla de uso doméstico y según las
instrucciones contenidas en este manual.
El aparato no se debe instalar al aire libre, ni
siquiera si el lugar está protegido, porque
es muy peligroso dejarlo expuesto a la
lluvia o a las tormentas.
No tocar el lavavajillas con los pies
descalzos.
No desconectar la clavija de la toma de
corriente tirando del cable sino sujetando
la clavija.
Es necesario cerrar el grifo de agua y
desconectar la clavija de la toma de
corriente al final de cada ciclo antes
de realizar operaciones de limpieza y
mantenimiento.
El número máximo de cubiertos se indica
en la ficha del producto.
En caso de avería, no acceder nunca a
los mecanismos internos para intentar su
reparación.
No apoyarse ni sentarse sobre la puerta
abierta: el aparato podría voltearse.
La puerta no se debe dejar abierta, ya que
podría causar tropiezos.
Conservar el detergente y el abrillantador
fuera del alcance de los niños.
Los embalajes no son juguetes para los
niños.
Los cuchillos y utensilios con bordes
filosos deben colocarse en el cesto para
cubiertos con las puntas/hojas hacia abajo
o en posición horizontal sobre los cestos
especiales adicionales o en la bandeja o el
tercer cesto en los modelos que lo tienen.
El aparato se debe conectar a la red del
agua utilizando el nuevo tubo de carga. El
tubo de carga anterior no se debe reutilizar.
4
Si el lavavajillas es de libre instalación, el
lado posterior debe quedar contra una
pared.
Eliminación
Eliminación del material de embalaje:
respetar las normas locales para que los
embalajes puedan ser reutilizados.
La norma Europea 2012/19/EU sobre
residuos de equipos eléctricos y
electrónicos (REEE) establece que los
electrodomésticos no se deben eliminar
de la misma manera que los desechos
sólidos urbanos. Los aparatos eliminados
deben ser recogidos en forma separada
para optimizar la tasa de recuperación
y reciclado de los materiales que los
componen e impedir que provoquen
daños a la salud y el medio ambiente. El
símbolo del cubo tachado se encuentra
en todos los productos para recordar la
obligación de recolección separada.
Para mayor información sobre la correcta
eliminación de los electrodomésticos, los
propietarios podrán dirigirse al servicio
público encargado de la recolección o a
los revendedores.
Ahorrar y respetar el medio ambiente
Ahorrar agua y energía
Poner en funcionamiento el lavavajillas sólo
con plena carga. A la espera de que la
máquina se llene, prevenir los malos olores
con el ciclo Remojo
(si lo hay - ver Programas).
Seleccionar un programa adecuado al
tipo de vajilla y al grado de suciedad
consultando la Tabla de programas:
- para la vajilla con suciedad normal utilizar
el programa Eco, que garantiza un bajo
consumo energético y de agua.
- si la carga es reducida, activar la opción
Media carga
(si la hay - ver Programas especiales
y opciones).
Si el suministro de energía eléctrica prevé
horarios de ahorro energético, realizar los
lavados en los horarios con tarifa reducida.
Para organizar mejor los lavados, puede
ser útil la opción de Arranque diferido
(si la
hay - ver Programas especiales y opciones).
PL
Zalecenia i środki ostrożności
Niniejsze urządzenie zostało
zaprojektowane i wyprodukowane zgodnie z
międzynarodowymi normami bezpieczeństwa.
Poniższe ostrzeżenia podane zostały ze
względów bezpieczeństwa i należy je uważnie
przeczytać.
Należy zachować niniejszą książeczkę
instrukcji dla przyszłych konsultacji. W
przypadku sprzedaży, odstąpienia lub
przeprowadzki należy dopilnować, aby
została przekazana wraz z urządzeniem
nowemu właścicielowi.
Uważnie przeczytać instrukcję: zawiera
ona ważne informacje dotyczące instalacji,
użytkowania i bezpieczeństwa.
To urządzenie zostało zaprojektowane
do użytku domowego lub podobnych
zastosowań, na przykład:
- w domach kolonijnych;
- do użytku przez klientów w hotelach, motelach
i innych obiektach typu mieszkaniowego;
- w pensjonatach bed and breakfast.
Rozpakować urządzenie i sprawdzić, czy nie
zostało uszkodzone podczas transportu. Jeśli
okazałoby się uszkodzone, nie podłączać go,
lecz skontaktować się ze sprzedawcą.
Bezpieczeństwo ogólne
Niniejsze urządzenie może być używane
przez dzieci powyżej 8 roku życia oraz
osoby o ograniczonych zdolnościach
fizycznych, zmysłowych i umysłowych
lub nie posiadające jego odpowiedniej
znajomości lub doświadczenia, pod
warunkiem, że znajdują się one pod ścisłym
nadzorem odpowiedzialnej za nie osoby
bądź też otrzymały instrukcje dotyczące
bezpiecznego użytkowania urządzenia
oraz zrozumiały związane z nim zagrożenia.
Dzieci nie powinny bawić się urządzeniem.
Czyszczenie oraz konserwację urządzenia
musi przeprowadzać użytkownik. Nie mogą
być one przeprowadzane przez dzieci bez
nadzoru.
Urządzenie jest przeznaczone do użytku
nieprofesjonalnego wewnątrz pomieszczeń
mieszkalnych.
• Urządzenie powinno być używane do mycia
naczyń w warunkach domowych zgodnie z
niniejszymi instrukcjami.
Urządzenia nie należy instalować na
5
świeżym powietrzu, nawet w miejscu
zadaszonym, gdyż wystawienie go na
działanie deszczu i burz jest bardzo
niebezpieczne.
Nie dotykać zmywarki, stojąc boso na
podłodze.
Przy wyjmowaniu wtyczki z gniazdka nie
ciągnąć za kabel, lecz trzymać za wtyczkę.
Po zakończeniu każdego cyklu i przed
przystąpieniem do czyszczenia i konserwacji
urządzenia należy zamknąć zawór wody i
wyjąć wtyczkę z gniazdka.
Maksymalna ilość nakryć jest podana w
karcie produktu.
W razie uszkodzenia w żadnym wypadku
nie ingerować w wewnętrzne mechanizmy
urządzenia i nie próbować go samodzielnie
naprawiać.
Nie opierać się ani nie siadać na otwartych
drzwiach: urządzenie mogłoby się
przewrócić.
Nie należy pozostawiać otwartych drzwi
zmywarki, gdyż można się o nie potknąć.
Trzymać detergenty i płyn nabłyszczający
z dala od dzieci.
Opakowania nie są zabawkami dla dzieci.
Noże i przyrządy o ostrych krawędziach
należy wkładać do kosza na sztućce, tak
aby czubki/ostrza były skierowane do dołu,
lub układać w położeniu poziomym na
półeczkach lub na tacy/trzecim koszu w
modelach, w których one zainstalowane.
Należy podłączyć urządzenie do sieci wodnej,
stosując nowy przewód doprowadzający
wodę; nie należy używać starego przewodu.
Podczas ustawiania zmywarek
wolnostojących, tylna część musi być
zwrócona w kierunku ściany.
Utylizacja
Utylizacja materiałów opakowaniowych:
dostosować się do lokalnych przepisów;
w ten sposób opakowanie będzie mogło
zostać ponownie wykorzystane.
Dyrektywa wspólnotowa 2012/19/EU w
sprawie zużytego sprzętu elektrycznego
i elektronicznego (WEEE) przewiduje,
że sprzęt gospodarstwa domowego nie
powinien być usuwany jako nieposortowane
odpady komunalne. Zużyte urządzenia
powinny podlegać selektywnej zbiórce w
celu uzyskania maksymalnego wskaźnika
odzysku i recyklingu ich materiałów
składowych oraz uniknięcia ewentualnych
zagrożeń dla zdrowia i środowiska. Symbol
przekreślonego kosza umieszczany
jest na wszystkich produktach w celu
przypominania o obowiązku segregacji
odpadów.
W celu uzyskania bliższych informacji na
temat prawidłowego złomowania urządzeń
gospodarstwa domowego ich właściciele
mogą się zwrócić do właściwych służb
publicznych lub do sprzedawców tych
urządzeń.
Oszczędność i ochrona środowiska
Oszczędność wody i energii
Uruchamiać zmywarkę tylko z pełnym
ładunkiem. W oczekiwaniu na napełnienie
maszyny zapobiegać przykrym zapachom
przy pomocy cyklu namaczania
(jeśli jest on
dostępny - zob. Programy).
• Wybierać programy odpowiednie do rodzaju
naczyń i stopnia zabrudzenia, stosując się
do Tabeli programów:
- dla naczyń normalnie zabrudzonych
stosować program Eco, który zapewnia
niskie zużycie energii i wody.
- przy ograniczonym ładunku włączyć opcję
Połowa ładunku
(
jeśli jest on dostępny - zob.
Programy specjalne i opcje).
Jeśli zawarta umowa na dostawę energii
elektrycznej przewiduje strefy czasowe
oszczędności energetycznej, uruchamiać
zmywarkę w godzinach obowiązywania
niższej taryfy. Opcja Opóźnienia startu
może pomoc w takiej organizacji zmywania
(jeśli jest ona dostępny - zob. Programy specjalne i
opcje).
BG
Предпазни мерки и съвети
Уредът е проектиран и конструиран в
съответствие с международните норми за
безопасност.
Тези предупреждения се дават от
съображения за безопасност и трябва да
бъдат прочетени внимателно.
Важно е да съхраните тази инструкция,
за да можете да направите справка във
всеки момент. В случай на продажба,
преотстъпване или преместване се
уверете, че инструкцията придружава
уреда.
Прочетете внимателно инструкцията: в нея
има важна информация за свързването на
уреда, използването му и безопасността
при работа.
6
отворената врата: уредът би могъл да
се преобърне.
Вратата не трябва да се държи отворена,
тъй като може да създаде опасност от
спъване.
Съхранявайте миещия препарат и
гланца на място, недостъпно за деца.
Опаковките не са детски играчки.
Острите ножове и прибори трябва
да бъдат поставяни в кошницата с
върха/острието надолу,и хоризонтално
на рампите или на таблата/третата
кошница при моделите, в които са
налични.
Уредът трябва да бъде свързан към
водопроводната мрежа посредством
новия маркуч за подаване на водата,
като старият не бива да се използва
отново.
Ако миялната машина е
свободностояща,задната й страна
трябва да опира в стена.
Изваждане от употреба
Изхвърляне на амбалажния материал:
придържайте се към местните норми,
така опаковките ще могат да се използват
повторно.
Европейската директива 2012/19/
за отпадъците от електрическо и
електронно оборудване предвижда
домакинските електроуреди да не
се изхвърлят заедно с обичайните
твърди градски отпадъци. Извадените
от употреба уреди трябва да бъдат
събирани отделно с цел да бъде
увеличен дялът на подлежащите на
повторна употреба и рециклиране
материали, от които са направени, както
и да бъдат избегнати евентуални вреди
за човешкото здраве и околната среда.
Символът зачеркнато кошче е поставен
върху всички продукти, за да напомня за
задължителното разделно събиране.
За по-нататъшна информация относно
правилното изваждане от употреба
на домакинските електроуреди,
притежателите им могат да се обърнат
към съответния обществен отдел за
услуги или към продавачите на тези
уреди.
Този уред е предназначен за домашна
употреба или за подобни приложения,
като:
вили/селски къщи;
оборудване за използване от клиентите
на хотели, мотели и други жилищни
сгради;
къщи за гости.
Разопаковайте уреда и проверете дали
не се е повредил по време на транспорта.
Ако е повреден, не го свързвайте, а се
обърнете към продавача.
Обща безопасност
Този електродомакински уред може
да се ползва от деца на минимум
осемгодишна възраст и от лица с
ограничени физически, сетивни или
умствени способности или без опит
или необходимите познания, ако бъдат
под наблюдение или са получили
инструкции относно безопасното
използване на уреда или запознаването
със свързаните с него опасности.
Децата не трябва да си играят с уреда.
Почистването и поддръжката на уреда
трябва да се извършва от ползвателя.
Не трябва да се извършва от деца без
надзор.
• Уредът е предвиден за непрофесионална
употреба в домашни условия на закрито.
Уредът трябва да се използва за миене
на съдове в домакинството и съгласно
дадените в това ръководство указания.
Машината в никакъв случай не трябва
да се инсталира на открито, дори когато
мястото е защитено с навес, тъй като
излагането й на дъжд и бури е много
опасно.
Не докосвайте миялната машина с боси
крака.
При изключване на щепсела от контакта
не хващайте кабела, а дръпнете самия
щепсел.
С приключването на всеки цикъл и
преди почистване или поддръжка
трябва да затворите крана за водата и
да изключите щепсела от контакта.
Максималният брой съдове е посочен
на информационната листовка на
уреда.
При повреда в никакъв случай не
правете опити да поправите вътрешните
механизми.
Не се облягайте и не сядайте върху
7
Икономии и опазване на околната
среда
Икономия на вода и енергия
Пускайте миялната машина само при
пълен капацитет. Докато изчаквате
да се напълни машината, може да
предотвратите появата на неприятна
миризма с цикъл „Накисване“
(
където е
наличен - виж Програми).
Изберете програма, подходяща за вида
съдове и степента им на замърсеност,
като направите справка с Таблица на
програмите:
- за нормално замърсени съдове
използвайте програмата „Еко“, която
осигурява нисък разход на енергия и
вода.
- ако зареждате с по-малко съдове,
пуснете машината на опцията Половин
зареждане
(където е налична - виж Специални
програми и опции)
Ако вашият договор за снабдяване
с електрическа енергия предвижда
часови период с пестене на енергия,
използвайте миялната машина в
часовете с намалена тарифа. Опцията
„Отложен старт“ може да подпомогне
задаването на измиванията по тази
система
(където е налична - виж Специални
програми и опции).
8
Product Fiche
Brand
INDESIT
Model
DFP 58T1
Rated capacity in standard place settings (1)
14
Energy efciency class on a scale from A+++ (low consumption) to D (high consumption)
A+
Energy consumption per year in kWh (2)
295.0
Energy consumption of the standard cleaning cycle in kWh
1.04
Power consumption of the off-mode in W
0.5
Power consumption of the left-on mode in W
5.0
Water consumption per year in litres (3)
3080.0
Drying efcacy class on a scale from G (low efcacy) to A (high efcacy)
A
Programme time for standard cleaning cycle in minutes
138’
The duration of the left-on mode in minutes
12
Noise in dB(A) Re 1pW
49
Built-in model
NO
NOTES
1) The information on the label and che relates to the standard cleaning cycle, this programme is suitable to clean normally soiled
tableware and it is the most efcient programme in terms of combined energy and water consumption. The standard cleaning cycle
corresponds to the Eco cycle.
2) Based on 280 standard cleaning cycles using cold water ll and the consumption of the low power modes. Actual energy consumption
depends on how the appliance is used.
3) Based on 280 standard cleaning cycles. Actual water consumption depends on how the appliance is used.
EN
Product Data (product fiche)
Ficha producto
Marca
INDESIT
Modelo
DFP 58T1
Capacidad nominal en número de cubiertos estándar (1)
14
Clase de eciencia energética sobre una escala de A+++ (bajo consumo) a D (alto consumo)
A+
Consumo energético anual en kWh (2)
295.0
Consumo energético del ciclo de lavado estándar en kWh
1.04
Consumo de potencia en el modo apagado en W
0.5
Consumo de potencia en el modo espera en W
5.0
Consumo de agua anual en litros (3)
3080.0
Clase de ecacia de secado sobre una escala de G (ecacia mínima) a A (ecacia máxima)
A
Duración del programa por ciclo de lavado estándar en minutos
138’
Duración del modo espera en minutos
12
Nivel de ruido en dB(A) re 1 pW
49
Modelo de encastre
No
NOTAS
1) La información contenida en la etiqueta y la cha se reere al ciclo estándar de lavado, este programa está diseñado para lavar
normalmente vajillas manchadas y es el programa más eciente en términos de consumo combinado de agua y energía. El ciclo
estándar de lavado se corresponde con el ciclo Eco.
2) Basado en 280 ciclos de lavado estándar con agua fría y consumo de modos de bajo consumo energético. El consumo actual
dependerá de cómo se utilice el aparato.
3) Basado en 280 ciclos de lavado estándar. El consumo actual de agua depende de cómo se utilice el aparato.
ES
Ficha producto
9
Karta produktu
Marka
INDESIT
Nazwa modelu
DFP 58T1
Pojemność znamionowa, wyrażona liczbą standardowych kompletów naczyń (1)
14
Klasa efektywności energetycznej, skala od A+++ (niskie zużycie) do D (wysokie zużycie)
A+
Zużycie energii w kWh rocznie (2)
295.0
Zużycie energii w standardowym cyklu zmywania w kWh
1.04
Zużycie energii w trybie wyłączenia i trybie czuwania w W
0.5
Zużycie energii w trybie włączenia i trybie czuwania w W
5.0
Roczne zużycie wody w litrach rocznie (3)
3080.0
Klasa efektywności suszenia, skala od G (minimalna efektywność) do A (maksymalna efektywność)
A
Czas programu dla standardowego cyklu zmywania w minutach
138’
Czas trwania trybu czuwania w minutach
12
Poziom emitowanego hałasu w dB(A) re1 pW
49
Model do zabudowy
Nie
Uwagi
1) Informacja, że cykl jest odpowiedni do zmywania normalnie zabrudzonych zastaw stołowych oraz że jest najbardziej efektywnym
programem pod względem łącznego zużycia energii i wody dla tego rodzaju zastawy stołowej; Standardowy cykl zmywania odpowiada
cyklowi Eco.
2) Na podstawie 280 standardowych cykli zmywania, przy użyciu zimnej wody, oraz w trybie niskiego zużycia energii. Rzeczywiste
zużycie energii zależy od sposobu użycia urządzenia.
3) Na podstawie 280 standardowych cykli zmywania. Rzeczywiste zużycie energii zależy od sposobu użycia urządzenia.
PL
Karta produktu
Продуктов фиш
Марка
INDESIT
Модел
DFP 58T1
Капацитет на стандартни комплекти за миене (1)
14
Енергиен клас от А+++ (ниска консумация) до D (висока консумация)
A+
Годишна консумация на енергия в kWh (2)
295.0
Консумация на енергия при стандартна програма на миене в kWh
1.04
Консумация на мощност при изключен режим в W
0.5
Консумация на мощност при включен режим в W
5.0
Годишна консумация на вода в литри (3)
3080.0
Клас на изсушаване от G (най-мокро) до A (най-сухо)
A
Продължителност в минути на стандартна програма за миене
138’
Продължителност на включен режим в минути
12
Ниво на шум в dB(A) re 1 pW
49
Модел за вграждане
He
Забележки
1) Информацията върху енергийния стикер и информационния фиш е на база на 280 страндартни цикъла на измиване.
Програма е подходяща за нормално замърсени съдове и е най-ефективната като комбинация за потребление на
електроенергия и вода. Стандартната прогама на измиване отговаря на Еко програма.
2) На база на 280 страндартни цикъла на измиване със студена вода и инономични програми . Реалната консумация на
електроенергия зависи от начина на експлоатиране на уреда.
3) На база на 280 страндартни цикъла на измиване. Реалната консумация на вода зависи от начина на експлоатиране на уреда.
BG
Продуктов фиш
10
EN
Assistance
Before contacting Assistance:
Check whether the problem can be resolved using the
Troubleshooting guide
(see Troubleshooting).
Restart the programme to check whether the problem has
ceased to exist.
If the problem persists, contact the Authorised Technical
Assistance Service.
Never use the services of unauthorised technicians.
Please have the following information to hand:
The type of malfunction.
The appliance model (Mod.).
The serial number (S/N).
This information can be found on the appliance data plate
(see
Description of the appliance)
.
ES
Asistencia Técnica
Antes de llamar al Servicio de Asistencia Técnica:
Verifique si la anomalía puede ser resuelta por Ud. mismo
(ver Anomalías y Soluciones).
Vuelva a poner en funcionamiento el programa para controlar
si el inconveniente ha sido resuelto.
Si no es así, llame al Servicio de Asistencia Técnica
Autorizado.
No llame nunca a técnicos no autorizados.
Comunique:
el tipo de anomalía;
el modelo de la máquina (Mod.);
y el número de serie (S/N).
Esta información se encuentra en la placa de características
ubicada en el aparato
(ver Descripción del aparato).
PL
Serwis Techniczny
Przed zwróceniem się do Serwisu Technicznego:
Sprawdzić, czy problemu nie można rozwiązać samodzielnie
(patrz Nieprawidłowości w działaniu i sposoby ich usuwania).
Ponownie uruchomić program, aby przekonać się, czy usterka
nie ustąpiła.
W przeciwnym wypadku skontaktować się z autoryzowanym
Serwisem Technicznym.
Zwracać się wyłącznie do autoryzowanych techników.
Podać:
rodzaj nieprawidłowości;
model urządzenia (Mod.);
numer seryjny (S/N).
Informacje te znajdują się na tabliczce znamionowej umieszczonej
na urządzeniu
(patrz Opis urządzenia).
BG
Помощ
Преди да се свържете с отдела за помощ:
Проверете дали проблемът може да се разреши, като
използвате насоките в “Отстраняване на неизправности”
(виж “Отстраняване на неизправности”).
Рестартирайте програмата, за да проверите дали проблемът
все още съществува.
Ако проблема не е отстранен, свържете се с оторизиран
сервиз за техническа помощ.
Никога не използвайте услугите на неупълномощени
техници.
Подгответе следната информация:
тип на повредата.
модел на уреда (Mod.).
сериен номер (S/N).
Можете да намерите тази информация на табелката с данни
на уреда
(виж “Описание на уреда”)
.
11
EN
Installation
* Only available in selected models.
If the appliance must be moved at any time, keep it in an
upright position; if absolutely necessary, it may be tilted onto
its back.
Connecting the water supply
Adaptation of the water supply for installation should only
be performed by a qualified technician.
The water inlet and outlet hoses may be positioned towards
the right or the left in order to achieve the best possible
installation.
Make sure the dishwasher does not bend or squash the hoses.
Connecting the water inlet hose
To a 3/4” gas cold or hot water connection point (max.
60°C).
Run the water until it is perfectly clear.
Screw the inlet hose tightly into position and turn off the
tap.
If the inlet hose is not long enough, contact a specialist
store or an authorised technician
(see Assistance)
.
The water pressure must be within the values indicated
in the Technical Data table - otherwise the dishwasher may
be function properly.
Make sure the hose is not bent or compressed.
Connecting the water outlet hose
Connect the outlet hose to a drain duct with a minimum
diameter of 2 cm. (A)
The outlet hose connection must be at a height ranging from
40 to 80 cm from the floor or surface where the dishwasher
rests.
Before connecting the water outlet hose to the sink drain,
remove the plastic plug (B).
Anti-flooding protection
To ensure floods do not occur, the dishwasher:
- is provided with a special system which blocks the water
supply in the event of anomalies or leaks from inside the
appliance.
Some models are also equipped with the supplementary
safety device New Acqua Stop*, which guarantees anti-
flooding protection even in the event of a supply hose rupture.
WARNING: HAZARDOUS VOLTAGE!
Under no circumstances should the water inlet hose be cut
as it contains live electrical parts.
Electrical connection
Before inserting the plug into the electrical socket, make
sure that:
The socket is earthed and complies with current
regulations;
the socket can withstand the maximum load of the
appliance as shown on the data plate located on the inside
of the door
(see chapter Description of the appliance);
The power supply voltage falls within the values indicated
on the data plate on the inside of the door.
The socket is compatible with the plug of the appliance. If
this is not the case, ask an authorised technician to replace
the plug (
see Assistance
). Do not use extension cables or
multiple sockets.
Once the appliance has been installed, the power supply
cable and the electrical socket should be easily accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, have it replaced
by the manufacturer or its authorised Technical Assistance
Service in order to prevent all potential hazards.
(See
Assistance)
The Company shall not be held responsible for any
incidents, if these regulations are not observed.
Positioning and levelling
1. Position the dishwasher on a level sturdy floor. If the floor is
uneven, the front feet of the appliance may be adjusted until
it reaches a horizontal position. If the appliance is levelled
correctly, it will be more stable and much less likely to move
or cause vibrations and noise while it is operating.
2. Before recessing the dishwasher, stick the adhesive
transparent strip* under the wooden shelf in order to protect
it from any condensation which may form.
3. Place the dishwasher so that its sides or back panel are in
contact with the adjacent cabinets or the wall. This appliance
can also be recessed under a single worktop*
(see the
Assembly instruction sheet)
.
4*. To adjust the height of the rear foot, turn the red hexagonal
bushing on the lower central part at the front of the dishwasher
using a hexagonal spanner with an opening of 8 mm. Turn the
spanner in a clockwise direction to increase the height and
in an anticlockwise direction to decrease it.
(see Building-in
instruction sheet attached to the documentation)
MIN 40 cm
MAX 80 cm
12
EN
Advice regarding the first wash cycle
After the installation, remove the stoppers from the racks and
the retaining elastic elements from the upper rack
(if any).
Water softener settings
Before starting the first wash cycle, set the hardness lev-
el of the water from the mains supply.
(see chapter Rinse
aid and refined salt).
First load the softener tank with water, then introduce about
1 kg of salt. It is perfectly normal for water to flow out.
As soon as this procedure is complete, run a wash cycle.
Only use salt that has been specifically designed for dish-
washers.
After the salt has been poured into the machine, the LOW
SALT indicator light* switches off.
If the salt container is not filled, the water softener and the
heating element may be damaged as a result.
Technical data
Dimensions
width 60 cm
height 85 cm
depth 60 cm
Capacity 14 standard place-settings
Water supply pressure
0,05 ÷ 1MPa (0.5 ÷ 10 bar)
7,25 – 145 psi
Power supply voltage See appliance data plate
Total absorbed power See appliance data plate
Fuse See appliance data plate
This dishwasher conforms to the
following European Community
Directives:
-2006/95/EC (Low Voltage)
-2004/108/EC (Electromagnetic
Compatibility)
-2009/125/EC (Comm. Reg.
1016/2010) (Ecodesign)
-97/17/EC (Labelling)
-2012/19/EU Waste Electrical
and Electronic Equipment
(WEEE)
* Only available in selected models.
The machine has a buzzer/set of tones
(depending on the
dishwasher model
) to inform the user that a command has
been implemented: power on, cycle end etc.
The symbols/indicator lights/LEDs on the control panel/
display may vary in colour and may have a flashing or fixed
light
(depending on the dishwasher model)
.
The display provides useful information concerning the type
of wash cycle, drying/wash-cycle phase, remaining time,
temperature etc etc.
13
EN
Overall view
Description of the
appliance
1. Upper rack
2. Upper spray arm
3. Tip-up compartments
4. Rack height adjuster
5. Lower rack
6. Lower spray arm
7. Washing filter
8. Salt dispenser
9. Detergent dispenser and rinse-aid dispenser
10. Data plate
11. Control panel***
***Only in completely built-in models.
* Only available in selected models.
The number and type of wash cycles and options may vary depending on the dishwasher model.
Control panel
Button and indicator
lights Start/Pause
ON/OFF/Reset button
Select wash cycle button
Delayed start button
Multi-functional tablets
button (Tabs)
Half load button
Display
Display
Delayed start indicator light
Rinse-aid indicator light
Salt indicator light
Washing indicator light
Drying indicator light
Half load indicator light
Multi-functional tablets
indicator light (Tabs)
Remaining time indicator
Wash cycle
number
14
EN
Refined Salt and Rinse Aid
Only use products which have been specifically designed
for dishwashers. Do not use table salt or industrial salt.
Follow the instructions given on the packaging.
If you are using a multi-function product, we recommend
that you add salt in any case, especially if the water is hard or
very hard.
(Follow the instructions given on the packaging.)
If you do not add salt or rinse aid, the LOW SALT* and
LOW RINSE AID* indicator lights will remain lit.
Measuring out the refined salt
The use of salt prevents the formation of LIMESCALE on the dishes
and on the machine’s functional components.
• It is important that the salt dispenser be never empty.
• It is important to set the water hardness.
The salt dispenser is located in the lower part of the dishwasher
(see Description)
and should be filled:
When the LOW RINSE AID indicator light in the control panel
is lit *;
When the green float* on the cap of the salt dispenser is no
longer visible.
See autonomy in the water hardness table.
1. Remove the lower rack and unscrew the
container cap (anticlockwise).
2. Only the first time you do this: fill the water
dispenser up to the edge.
3. Position the funnel
(see figure)
and
fill the salt container right up to its edge
(approximately 1 kg); it is not unusual for a
little water to leak out.
4. Remove the funnel and wipe any salt residue away from the
opening; rinse the cap under running water and then screw it on.
It is advisable to perform this procedure every time you add salt
to the container.
Make sure the cap is screwed on tightly, so that no detergent can
get into the container during the wash cycle (this could damage
the water softener beyond repair).
Whenever you need to add salt, we recommend carrying out
the procedure before the washing cycle is started.
Setting the water hardness
For perfect water softener operation, it is essential that the
adjustment be based on the water hardness in your house. Ask
your local water supplier for this information. The factory setting
is for medium water hardness.
• Switch the dishwasher on using the On/Off button.
• Switch it off using the On/Off button
Hold down the START/PAUSE button for 5 seconds until
you hear a beep.
• Switch it on using the On/Off button
The display shows the current selection level number and the
salt indicator light.
Press button P to select the desired hardness level
(see Hardness
Table).
• Switch it off using the On/Off button
• Setting is complete!
Even if using multi-functional tablets, the salt dispenser should
still be filled.
Measuring out the rinse aid
Rinse aid makes dish DRYING easier. The rinse aid dispenser
should be filled:
When the LOW RINSE AID indicator light on the panel/display
is lit *;
When the dark optical indicator* on the dispenser door “D”
becomes transparent.
1. Open the dispenser “D” by pressing and pulling up the tab
on the lid;
2. Carefully introduce the rinse aid as far as the maximum reference
notch of the filling space - avoid spilling it. If this happens, clean
the spill immediately with a dry cloth.
3. Press the lid down until you hear a click to close it.
NEVER pour the rinse aid directly into the appliance tub.
Rinse-aid dispenser setting
If you are not completely satisfied with the drying results, you can
adjust the quantity of rinse aid.
• Switch the dishwasher on using the On/Off button.
• Switch it off using the On/Off button
• Press the START/PAUSE button 3 times - a beep will be
heard.
• Switch it on using the On/Off button
• The display shows the current selection level and the rinse aid
indicator light.
Press button P to select the level of rinse aid quantity to be
supplied.
• Switch it off using the On/Off button
• Setting is complete!
If the rinse aid level is set to ZERO, no rinse aid will be supplied.
The LOW RINSE AID indicator light will not illuminate if you run
out of rinse aid.
Up to maximum 4 levels can be set based on the dishwasher
model.
If there are streaks on the crockery, set the adjustment device
to a lower number (1-2.)
If there are drops of water or limescale marks, set the adjustment
device to a higher number (3-4.)
Water Hardness Table
Average salt dispenser
capacity duration**
level °dH °fH mmol/l months
1 0 - 6 0 - 10 0 - 1 7 months
2 6 - 11 11 - 20 1,1 - 2 5 months
3 12 - 17 21 - 30 2,1 - 3 3 months
4 17 - 34 31 - 60 3,1 - 6 2 months
5*
34 - 50 61 - 90 6,1 - 9 2/3 weeks
For values between 0°f and 10°f, we do not recommend the use of salt.
* a setting of 5 may increase cycle duration.
** 1 wash cycle per day.
(°dH = hardness measured in German degrees - °f = hardness
measured in French degrees – mmol/l = millimoles per litre)
* Only available in selected models.
M
A
X
15
EN
Loading the racks
Tips
Before loading the racks, remove all food residues from the
crockery and empty liquids from glasses and containers. No
preventive rinsing is needed under running water.
Arrange the crockery so that it is held in place firmly and does
not tip over; and arrange the containers with the openings facing
downwards and the concave/convex parts placed obliquely,
thus allowing the water to reach every surface and flow freely.
Make sure that the lids, handles, trays and frying pans do not
prevent the spray arms from rotating. Place any small items in
the cutlery basket.
Since plastic dishes and non-stick frying pans usually retain more
water drops, their drying will be not so good as that of ceramic
or stainless-steel dishes.
Lightweight items such as plastic containers should be placed in
the upper rack and arranged so that they cannot move.
After loading the appliance, make sure that the spray arms can
rotate freely.
Lower rack
The lower rack can hold pans, lids, dishes, salad bowls, cutlery
etc. Large plates and lids should ideally be placed at the sides.
Very soiled dishes and pans should be placed in the lower rack
because in this sector the water sprays are stronger and allow
a higher washing performance.
Several dishwasher models are fitted with tip-up sectors*.
They can be used in a vertical position when arranging dishes
or in a horizontal position (lower) to load pans and salad bowls
easily.
Cutlery basket
The basket is equipped with top grilles for improved cutlery ar-
rangement. The cutlery basket should be positioned only at the
front of the lower rack
Upper rack
Load this rack with delicate and lightweight crockery such as
glasses, cups, saucers and shallow salad bowls.
Several dishwasher models are fitted with tip-up sectors*.
They can be used in a vertical position when arranging tea/
dessert saucers or in a lower position to load bowls and food
containers.
* Only available in selected models.
16
EN
The upper rack can be adjusted for height based on requirements:
high position to place bulky crockery in the lower rack and low
position to make the most of the tip-up compartments/sectors
by creating more space upwards.
Tip-up compartments with adjustable position*
The side tip-up compartments can be positioned at three different
heights to optimize the arrangement of crockery inside the rack.
Wine glasses can be placed safely
in the tip-up compartments by
inserting the stem of each glass
into the corresponding slots. For
optimum drying results incline the
tip-up compartments more. To
change the inclination, pull up the
tip-up compartment, slide it slightly
and position it as you wish.
Cutlery tray*
Some dishwasher models are fitted with a sliding tray which
can be used to hold serving utensils or small cups. For optimum
washing performance avoid positioning bulky crockery directly
below the tray. The cutlery tray can be removed
(see Figure).
Adjusting the height of the upper rack
In order to make it easier to arrange the crockery, the upper rack
may be moved to a higher or lower position.
The height of the upper rack should be adjusted WHEN THE
RACK IS EMPTY.
NEVER raise or lower the rack on one side only.
If the rack is equipped with a Lift-Up device*
(see figure)
, lift
it up by holding its sides. To restore the lower position, press
the levers (A) at the sides of the rack and follow the rack down.
Unsuitable crockery
Wooden crockery and cutlery.
Delicate decorated glasses, artistic handicraft and antique
crockery. Their decorations are not resistant.
Parts in synthetic material which do not withstand high
temperatures.
Copper and tin crockery.
Crockery soiled with ash, wax, lubricating grease or ink.
The colours of glass decorations and aluminium/silver pieces
can change and fade during the washing process. Some types
of glass (e.g. crystal objects) can become opaque after a number
of wash cycles too.
Damage to glass and crockery
Caused by:
Type of glass and glass production process.
Chemical composition of detergent.
Water temperature of rinse cycle.
Tips:
Only use glasses and porcelain guaranteed by the
manufacturer as dishwasher safe.
Use a delicate detergent suitable for crockery.
Collect glasses and cutlery from the dishwasher as soon as
the wash cycle is over.
*Only available in selected models with different numbers and
positions.
17
EN
Measuring out the detergent
Good washing results also depend on the correct amount of
detergent being used. Exceeding the stated amount does not
result in a more effective wash and increases environmental
pollution.
The amount can be adjusted to the soil level.
In the case of normally soiled items, use approximately either
35g (powder detergent) or 35ml (liquid detergent). If tablets
are used, one tablet will be enough.
If the crockery is only lightly soiled or if it has been rinsed
with water before being placed in the dishwasher, reduce the
amount of detergent used accordingly.
For good washing results also follow the instructions shown
on the detergent box.
For further questions please ask the detergent producers.
To open the detergent dispenser use the opening device “A”.
Introduce the detergent into the dry dispenser “B” only.
Place the amount of detergent for pre-washing directly inside
the tub.
1. When measuring out the detergent refer to the Table of wash
cycles to add the proper quantity. Compartment B comprises a
level showing the maximum quantity of liquid or powder detergent
that can be added to each cycle.
2. Remove detergent residues from the edges of the dispenser
and close the cover until it clicks.
3. Close the lid of the detergent dispenser by pulling it up until
the closing device is secured in place.
The detergent dispenser automatically opens up at the right time
according to the wash cycle.
If all-in-one detergents are used, we recommend using the TABS
option, because it adjusts the cycle so that the best washing and
drying results are always achieved.
Only use detergent which has been specifically designed
for dishwashers.
DO NOT USE washing up liquid.
Using excessive detergent may result in foam residues
remaining in the machine after the cycle has ended.
To achieve the best washing and drying results, the combined
use of detergent, rinse aid liquid and refined salt is required.
We recommend using detergents that do not contain
phosphates or chlorine, as these products are harmful
to the environment.
Detergent and
dishwasher use
Starting the dishwasher
1. Turn the water tap on.
2. Press the ON/OFF button.
3. Open the door and pour in a suitable amount of detergent
(see below).
4. Load the racks
(see Loading the racks)
and shut the door.
5. Select the wash cycle in accordance with the type of crockery
and its soil level
(see Table of wash cycles)
by pressing the P
button.
6. Select the wash options*
(see Special wash cycles and
options.)
7. Start the cycle by pressing the Start/Pause button: The wash
indicator light goes on and the time left to the end of the cycle
appears on the display together with the wash-cycle number.
8. At the end of the cycle, the display shows END. Switch off the
appliance by pressing the ON/OFF button, shut off the water tap
and unplug the appliance from the electricity socket.
9. Wait a few minutes before removing the crockery to avoid
getting burnt. Unload the racks, beginning with the lower level.
- The machine will switch off automatically during long
periods of inactivity in order to minimise electricity
consumption.
AUTO WASH CYCLES*: some models of dishwasher are
equipped with a special sensor which can be used to assess the
level of soiling and automatically select the most efficient and
economic wash cycle accordingly. The duration of the auto wash
cycles may vary due to the operation of the sensor.
Changing a wash cycle in progress
If a mistake was made in the wash-cycle selection process, it is
possible to change the cycle provided that it has only just begun:
Once the wash cycle has started, in order to change the wash
cycle switch off the machine by pressing and holding the ON/
OFF/Reset button. Switch it back on using the same button and
select the desired wash cycle and options.
Adding extra crockery
Press the Start/Pause button and open the door, taking care to
avoid the escaping steam. Then place the crockery inside the
dishwasher. Press the Start/Pause button: The cycle will start
again after a long beep has been emitted.
If the delayed start has been set, at the end of the countdown
the wash cycle will not start. It will stay in Pause mode.
Press the Start/Pause button to pause the machine; the wash
cycle is stopped.
At this stage the wash cycle cannot be changed.
Accidental interruptions
If the door is opened during the wash cycle or there is a power
cut, the cycle stops. It starts again from the point at which it
was interrupted once the door has been shut or the electricity
supply restored.
* Only available in selected models.
18
EN
Wash cycles
Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242.
Based on the different conditions of use, the wash-cycle duration and data can change.
The number and type of wash cycles and options may vary depending on the dishwasher model.
Wash Cycle Drying Options
Wash Cycle
Duration
Water
Consumption
(l/cycle)
Energy
Consumption
(kWh/cycle)
1. Eco Yes Delayed start – Tabs – Half Load 02:18’ 11 1,04
2. Intensive Yes Delayed start – Tabs – Half Load 02:30’ 16,5 1,7
3. Normal Yes Delayed start – Tabs – Half Load 02:00’ 16 1,35
4. Sixty No Delayed start – Tabs – Half Load 01:00’ 11,5 1,1
5. Delicates Yes Delayed start – Tabs – Half Load 01:30’ 12 1,1
6. Rapid No Delayed start – Tabs
00:30’ 8,5 0,45
7. Prewash No Delayed start – Half Load
00:10’ 4 0,01
8. Hygiene Yes Delayed start
01:20’ 11,5 1,35
Instructions on wash-cycle selection and detergent dosage
1. The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to wash crockery with a normal
soil level and is the most efficient cycle in terms of energy and water consumption for this type of crockery.
29 gr/ml + 6 gr/ml** – 1 Tab
(**Quantity of pre-washing detergent)
2. Heavily soiled dishes and pans (not to be used for delicate items). 35 gr/ml – 1 Tab
3. Normally soiled pans and dishes. 29 gr/ml + 6 gr/ml** – 1 Tab
4. Limited quantity of daily soiling (ideal for 4 place settings) 25 gr/ml – 1 Tab
5. Cycle for delicate items, which are more sensitive to high temperatures 35 gr/ml – 1 Tab
6. Fast cycle to be used for slightly dirty dishes (ideal for 2 place settings) 25 gr/ml – 1 Tab
7. Pre-wash while awaiting completion of the load with the dishes from the next meal. No detergent.
8. High-temperature disinfecting cycle. Ideal to clean crockery and feeding bottles. 30 gr/ml – 1 Tab
Standby consumption: Left-on mode consumption: 5,0 W - Off mode consumption: 0.5 W
19
EN
Special wash cycles
and Options
* Only available in selected models.
Notes:
Optimum performance levels when using the “Rapid” and “Sixty”
cycles can be achieved by respecting the specified number of
place settings.
To reduce consumption even further, only run the dishwasher
when it is full.
Note for Test Laboratories: for information on comparative EN
testing conditions, please send an email to the following address:
Wash options*
The OPTIONS may only be set, changed or reset after the
wash cycle has been selected and before the Start/Pause
button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected wash cycle
(see Table of wash cycles)
, the
corresponding symbol flashes rapidly 3 times.
If an option is selected which is not compatible with another
(previously selected) option, it will flash 3 times and switch
off, while the most recently selected option will remain active.
To deselect an option which has been set by mistake, press
the corresponding button again.
Multi-functional tablets (Tabs)
This option optimises washing and drying results.
When using multi-functional tablets, press the MULTI-
FUNCTIONAL TABLETS button; the corresponding symbol
will light up. If the button is pressed again, the option will be
deselected.
The “Multi-functional tablets” option results in a longer
wash cycle.
The use of tablets is only recommended for models
having this option and it is not recommended with wash
cycles which do not specify the use of multi-functional
tablets.
Half Load
If there are not many dishes to be washed, a half
load cycle may be used in order to save water, electricity
and detergent.
Select the wash cycle and press the HALF LOAD button; the
indicator lights up.
Press the HALF LOAD button again to deselect this option.
The amount of detergent can be halved.
Delayed start
It is possible to delay the start time of the cycle by
a period of time between 1 and 24 hours:
1. Select the desired wash cycle and any other options
required; press the DELAYED START button. The indicator
light will go on. Use the same button to select when the wash
cycle will start (h01, h02 etc.)
2. Confirm the selection using the START/PAUSE button to
start the countdown.
3. Once this time has elapsed, the DELAYED START indicator
light goes off and the wash cycle begins.
To deselect the DELAYED START option, press the DELAYED
START button until the text OFF appears.
The Delayed Start function cannot be set once a wash
cycle has started.
20
EN
Care and maintenance
Shutting off the water and electricity
supplies
Turn off the water tap after every wash cycle to avoid leaks.
Always unplug the appliance when cleaning it and when
performing maintenance work.
Cleaning the dishwasher
The external surfaces of the machine and the control panel
can be cleaned using a non-abrasive cloth which has been
dampened with water. Do not use solvents or abrasive
products.
Any marks on the inside of the appliance may be removed
using a cloth dampened with water and a little vinegar.
Preventing unpleasant odours
Always keep the door of the appliance ajar in order to avoid
moisture from forming and being trapped inside the machine.
Clean the seals around the door and detergent dispensers
regularly using a damp sponge. This will avoid food becoming
trapped in the seals, which is the main cause behind the
formation of unpleasant odours.
Cleaning the spray arms
Food residue may become encrusted onto the sprayer arms
and block the holes used to spray the water. It is therefore
recommended that you check the arms from time to time and
clean them with a small non-metallic brush.
The two spray arms may both be removed.
To remove the upper spray arm,
turn the plastic locking ring in an
anti-clockwise direction. The upper
sprayer arm should be replaced
so that the side with the greater
number of holes is facing upwards.
The lower spray arm can be removed
by pressing on the side tabs and
pulling it upwards.
Cleaning the water inlet hose*
If the water hoses are new or have not been used for an extended
period of time, let the water run to make sure it is clear and free
of impurities before performing the necessary connections. If this
precaution is not taken, the water inlet could become blocked
and damage the dishwasher.
Clean the water inlet filter at the tap outlet regularly.
- Turn off the water tap.
- Unscrew the end of the water inlet hose, remove the filter and
clean it carefully under running water.
- Re-place the filter and screw the water hose back into position.
Cleaning the filters
The filter assembly consists of three filters which remove food
residues from the washing water and then recirculate the water.
They must be cleaned if you wish to achieve the best results in
every wash.
Clean the filters regularly.
The dishwasher must not be used without filters or if the filter
is loose.
After several washes, check the filter assembly and if necessary
clean it thoroughly under running water, using a non-metallic
brush and following the instructions below:
1. Turn the cylindrical filter C in an anti-clockwise direction and
pull it out
(fig. 1).
2. Remove the cup filter B by exerting a slight pressure on the
side flaps
(fig. 2);
3. Slide out the stainless-steel plate filter A.
(fig. 3).
4. Inspect the trap and remove any food residues. NEVER
REMOVE the wash-cycle pump protection
(black detail) (fig.4).
After cleaning the filters, re-place the filter assembly and fix it
in position correctly; this is essential for maintaining the efficient
operation of the dishwasher.
Leaving the machine unused for extended
periods
Disconnect the appliance from the electricity supply and shut
off the water tap.
Leave the door of the appliance ajar.
When you return, run a wash cycle when the dishwasher is
empty.
* Only available in selected models.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Indesit DFP 58T1 C NX EU instrukcja

Kategoria
Zmywarki
Typ
instrukcja