Note: This operation is to be done with power completely disconnected and the PDU not

attached to the UPS. Consult a qualified electrician for installation.

1. Remove the transformer terminal block cover.

2. Remove the transformer input cord.

3. Using the supplied cable, connect the black wire to L1,

the white wire to L2 and the green/yellow wire to G on the

transformer input.

Addendum

1111 W. 35th Street, Chicago, IL 60609 USA

6. Wire the transformer to the AC output on the PDU following the directions

in the UPS manual (black to L1, white to L2 and green/yellow to the

ground).

7. Secure the PDU Terminal Block and Strain Relief.