KLUGE KPI3000B Instrukcja obsługi

Typ
Instrukcja obsługi
KPI3000B
KPI3010B
EN Hob / User Manual
PL Płyta grzewcza / instrukcja obsługi
EN - 2
Icon Type Meaning
WARNING Serious injury or death risk
RISK OF ELECTRIC SHOCK Dangerous voltage risk
FIRE Warning; Risk of re / ammable materials
CAUTION Injury or property damage risk
IMPORTANT / NOTE Operating the system correctly
Thank you for choosing this product.
This User Manual contains important safety information and instructions on the operation
and maintenance of your appliance.
Please take the time to read this User Manual before using your appliance and keep this
book for future reference.
CONTENTS
1.SAFETY INSTRUCTIONS .................................................................................................4
1.1 General Safety Warnings ...............................................................................................4
1.2 Installation Warnings ......................................................................................................6
1.3 During Use .....................................................................................................................7
1.4 During Cleaning and Maintenance .................................................................................8
2.INSTALLATION AND PREPARATION FOR USE ............................................................10
2.1 Instructions for the Installer ..........................................................................................10
2.2 Installation of the Hob ...................................................................................................10
2.3 Electrical Connection and Safety..................................................................................12
3.PRODUCT FEATURES ...................................................................................................13
4.USE OF PRODUCT ........................................................................................................14
4.1 Control of Hob ..............................................................................................................14
Child Lock ...................................................................................................................15
5.CLEANING AND MAINTENANCE...................................................................................17
5.1 Cleaning ...................................................................................................................17
6.TROUBLESHOOTING&TRANSPORT ............................................................................19
6.1 Troubleshooting ............................................................................................................19
6.2 Transport ...................................................................................................................19
EN - 4
1. SAFETY INSTRUCTIONS
Carefully read all instructions before using your
appliance and keep them in a convenient place for
reference when necessary.
This manual has been prepared for more than one
model therefore your appliance may not have some
of the features described within. For this reason, it
is important to pay particular attention to any figures
whilst reading the operating manual.
1.1 General Safety WarninGS
This appliance can be used by children aged from
8 years and above and by persons with reduced
physical, sensory or mental capabilities or lack
of experience and knowledge if they have been
given supervision or instruction concerning use of
the appliance in a safe way and understand the
hazards involved. Children should not play with the
appliance. Cleaning and user maintenance should
not be made by children without supervision.
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to avoid
touching heating elements. Keep children less than 8
years of age away unless they are continually
supervised.
WARNING: Unattended cooking on a hob with
fat or oil can be dangerous and may result in fire.
NEVER try to extinguish such a fire with water, but
switch off the appliance and cover the flame with a lid
or a fire blanket.
CAUTION: The cooking process has to be
supervised. A short term cooking process has to be
supervised continuously
EN - 5
WARNING: Danger of fire: Do not store items
on the cooking surfaces.
WARNING: If the surface is cracked, switch off
the appliance to avoid the possibility of electric shock.
For induction hobs, metallic objects such as knives,
forks, spoons and lids should not be placed on the
hob surface because they can get hot.
For induction hobs, after use switch off the hob
element using the control knob. Do not rely on the
pan detector.
For models which incorporate a hob lid, clean any
spillages off the lid before use and allow the cooker
to cool before closing the lid.
Do not operate the appliance with an external timer
or separate remote-control system.
Do not use harsh abrasive cleaners or scourers to
clean oven surfaces. They can scratch the surfaces
which may result in shattering of the door glass or
damage to surfaces.
Do not use steam cleaners for cleaning the
appliance.
Your appliance is produced in accordance with all
applicable local and international standards and
regulations.
Maintenance and repair work should only be carried
out by authorised service technicians. Installation
and repair work that is carried out by unauthorised
technicians may be dangerous. Do not alter or
modify the specifications of the appliance in any
way. Inappropriate hob guards can cause accidents.
Before connecting your appliance, make sure
that the local distribution conditions (nature of the
gas and gas pressure or electricity voltage and
EN - 6
frequency) and the specifications of the appliance
are compatible. The specifications for this appliance
are stated on the label.
CAUTION: This appliance is designed only for
cooking food and is intended for indoor domestic
household use only. It should not be used for any
other purpose or in any other application, such as for
non-domestic use, in a commercial environment or for
heating a room.
All possible measures have been taken to ensure
your safety. Since the glass may break, care should
be taken while cleaning to avoid scratching. Avoid
hitting or knocking the glass with accessories.
Make sure that the supply cord is not trapped or
damaged during installation. If the supply cord is
damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in
order to prevent a hazard.
Please keep children and animals away from this
appliance.
When the induction hob is in use, keep the objects
that are sensitive to magnetic fields (such as credit
cards, bank cards, watches, and similar items) away
from the hob. It is strongly suggested that anyone
with a pacemaker should consult their cardiologist
before using the induction hob.
1.2 inStallation WarninGS
Do not operate the appliance before it is fully
installed.
The appliance must be installed by an authorised
technician. The manufacturer is not responsible
for any damage that might be caused by defective
placement and installation by unauthorised people.
EN - 7
When the appliance is unpacked, make sure that
it is has not been damaged during transportation.
In the case of a defect do not use the appliance
and contact a qualified service agent immediately.
The materials used for packaging (nylon, staplers,
Styrofoam, etc.) may be harmful to children and they
should be collected and removed immediately.
Protect your appliance against atmospheric effects.
Do not expose it to effects such as sun, rain, snow,
dust or excessive humidity.
Materials around the appliance (i.e. cabinets) must
be able to withstand a minimum temperature of
100°C.
The temperature of the bottom surface of the hob
may rise during operation, therefore a board must
be installed underneath the product.
1.3 DurinG uSe
Do not put flammable or combustible materials in or
near the appliance when it is operating.
Do not leave the cooker unattended while
cooking with solid or liquid oils. They may catch fire
under extreme heating conditions. Never pour water
on to flames that are caused by oil, instead switch the
cooker off and cover the pan with its lid or a fire
blanket.
If the product will not be used for a long period of
time, turn the main control switch off. Turn the gas
valve off when a gas appliance is not in use.
Always position pans over the centre of the cooking
zone, and turn the handles to a safe position so they
cannot be knocked or grabbed.
Make sure the appliance control knobs are always
in the “0” (stop) position when it is not in use.
EN - 8
1.4 DurinG CleaninG anD MaintenanCe
Make sure that your appliance is turned off at
the mains before carrying out any cleaning or
maintenance operations.
Do not remove the control knobs to clean the control
panel.
To maintain the efficiency and safety of your
appliance, we recommend you always use original
spare parts and to call our authorised service agents
in case of need.
CE Declaration of conformity
We declare that our products meet the
applicable European Directives, Decisions
and Regulations and the requirements listed
in the standards referenced.
This appliance has been designed to be used only
for home cooking. Any other use (such as heating a
room) is improper and dangerous.
The operating instructions apply to several models.
You may notice differences between these instructions
and your model.
Disposal of your old machine
This symbol on the product or on its packaging
indicates that this product should not be
treated as household waste. Instead it should
be handed over to the applicable collection
point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and
human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailed information about recycling of this product,
EN - 9
please contact your local city office, your household
waste disposal service or the retailer who you
purchased this product from.
EN - 10
2. INSTALLATION AND
PREPARATION FOR USE
WARNING: This appliance must be
installed by an authorised service
person or qualified technician,
according to the instructions in this guide
and in compliance with the current local
regulations.
Incorrect installation may cause harm
and damage, for which the manufacturer
accepts no responsibility and the
warranty will not be valid.
Prior to installation, ensure that the local
distribution conditions (electricity voltage
and frequency and/or nature of the gas
and gas pressure) and the adjustments
of the appliance are compatible. The
adjustment conditions for this appliance
are stated on the label.
The laws, ordinances, directives and
standards in force in the country of use
are to be followed (safety regulations,
proper recycling in accordance with the
regulations, etc.).
2.1 inStruCtionS for the inStaller
General instructions
After removing the packaging material
from the appliance and its accessories,
ensure that the appliance is not
damaged. If you suspect any damage,
do not use it and contact an authorised
service person or qualified technician
immediately.
Make sure that there are no flammable
or combustible materials in the close
vicinity, such as curtains, oil, cloth etc.
which may catch fire.
The worktop and furniture surrounding
the appliance must be made of
materials resistant to temperatures
above 100°C.
If a cooker hood or cupboard is to be
installed above the appliance, the safety
distance between cooktop and any
cupboard/cooker hood should be as
shown below.
HOB
Minimum
42 cm Minimum
42 cm
Minimum
65 cm (with
hood)
Minimum 70
cm (without
hood)
The appliance should not be installed
directly above a dishwasher, fridge,
freezer, washing machine or clothes
dryer.
If the base of the appliance is accessible
by hand, a barrier made from a suitable
material must be fitted below the base
of the appliance, ensuring that there is
no access to the base of the appliance.
If the hob is installed above an oven, the
oven should have a cooling fan.
Make sure that the induction hob is well
ventilated and the air inlet and outlet are
not blocked.
2.2 inStallation of the hob
The appliance is supplied with an
installation kit including adhesive sealing
material, fixing brackets and screws.
Cut the aperture dimensions as
indicated in the figure. Locate the
aperture on the worktop so that, after
the hob is installed, the following
requirements are followed.
B (mm) 290 min. A (mm) 50
T (mm) 510 min. C (mm) 50
H (mm) 56 min. E (mm) 250
C1 (mm) 270 min. F (mm) 10
C2 (mm) 490 G (mm) 20
D (mm) 50 I (mm) 38
J (mm) 5
EN - 11
B
T
C2
A
C
C1
H
F
HOB
G
I
J
I
J
Separator Separator
F
HOB
B
D
E
T
C2
A
C
C1
H
G
Place the hob in the cut out. Mark the
location of the hob on the cooktop.
Worktop
Hob
Marker
Remove the hob. Place the gasket on
the line you marked. Make sure that the
line centres the gasket. Ensure that the
junctions overlap at the corners and no
gap is left along the sealing material.
EN - 12
Line
you
marked
Gasket
Insert the appliance into the aperture
and fix in position using the brackets (A)
and screws (B). Adjust the position of
the brackets depending on the thickness
of the worktop and tighten the screws
evenly. Carefully trim away any excess
sealing material (C) from around the
appliance.
Hob Hob
CC
AA
t<25 mm t>25 mm
BB
2.3 eleCtriCal ConneCtion anD Safety
WARNING: The electrical connection
of this appliance should be carried out
by an authorised service person or
qualified electrician, according to the
instructions in this guide and in compliance
with the current local regulations.
WARNING: THE APPLIANCE MUST
BE EARTHED.
Before connecting the appliance to the
power supply, the voltage rating of the
appliance (stamped on the appliance
identification plate) must be checked for
correspondence to the available mains
supply voltage, and the mains electric
wiring should be capable of handling the
appliance’s power rating (also indicated
on the identification plate).
During installation, please ensure
that isolated cables are used. An
incorrect connection could damage
your appliance. If the mains cable is
damaged and needs to be replaced this
should be done by a qualified person.
Do not use adaptors, multiple sockets
and/or extension leads.
The supply cord should be kept away
from hot parts of the appliance and must
not be bent or compressed. Otherwise
the cord may be damaged, causing a
short circuit.
If the appliance is not connected
to the mains with a plug, a all-pole
disconnector switch (with at least 3 mm
contact spacing) must be used in order
to meet the safety regulations.
The fused switch must be easily
accessible once the appliance has been
installed.
Ensure all connections are adequately
tightened.
Fix the supply cable in the cable clamp
and then close the cover.
The terminal box connection is placed
on the terminal box.
PE
Brown
Blue
Yellow+Green
EN - 13
3. PRODUCT FEATURES
Important: Specifications for the product vary and the appearance of your appliance
may differ from that shown in the figures below.
List of Components
1. Induction zone
2. Control Panel
1
2
EN - 14
4. USE OF PRODUCT
4.1 Control of hob
Control of the Induction zone
The information given in the following table
is for guidance only.
Settings Use for
0Element off
1-3 Delicate warming
4-5 Gentle simmering, slow warming
6-7 Reheating and rapid simmering
8Boiling, saute and searing
9Maximum heat
PBoost function
Cookware
Use thick, flat, smooth bottomed
good quality cookware made of steel,
enamelled steel, cast iron or stainless
steel. The quality and composition of the
cookware has a direct effect on cooking
performance.
Do not use concave or convex bottomed
cookware. Cookware made from
aluminium and stainless steel with non-
ferromagnetic bottom, glass, copper,
brass, ceramic, porcelain are unsuitable
for induction heating.
To check if the cookware is suitable
for induction cooking you can hold a
magnet to the base of the cookware.
If the magnet sticks, the cookware is
generally suitable or you can put little
water in the cookware on a cooking
zone set at maximum level. The water
must heating at a few seconds.
When using certain pans, you may hear
various noises coming from them, this is
due to the design of the pans and does
not affect the performance or safety of
the hob.
To achieve the best cooking
performance, the pan should be placed
in the center of the cooking zone.
symbol flashes when the power level
is selected in cooking zone display if
unsuitable pan or no pan is placed on
the cooking zone. The cooking zone will
switch off automaticaly after 2 minutes.
If a suitable pan is placed on the
cooking zone symbol will disappear
and cooking continues at the selected
power level.
To obtain best energy transferring the
diameter of the cookware base should
match that of the cooking zone.
The minimum cookware diameter
should be D120 mm for 160 mm
cooking zones, D140 mm for 210 mm
cooking zones and D160 mm for 290
mm cooking zones.
Circular Saucepan
Base
Small Saucepan
Diameter Saucepan base that
has not settled
The appliance is operated by touching
buttons and the functions are confirmed by
displays and audible sounds.
Control of the Touch Control Unit
1 3
2456
78 109 11 12
1- Smart pause
2- Key lock
3- Key lock indicator
4- Heater display
5- Timer function cooking zone indicators
6- Timer display
7- Decrease heat setting/timer
8- Heater indicator
9- Increase heat setting/timer
EN - 15
10- Timer selection
11- Boost
12- On/Off
Use the induction cooking zones with
suitable cookware.
After mains voltage is applied, all displays
are illuminated briefly. After this, the hob is
in stand-by mode ready for operation.
The hob is controlled by the pressing the
appropriate electronic button. Each button
press is followed by a buzzer sound.
Switching the appliance on
Switch the hob on by touching ON/OFF
button . All heater displays show a
static ´0` and the bottom right dots blink.
(If a cooking-zone is not selected within 20
seconds, the hob will automatically turn off).
Switching the appliance off
Switch the hob off at any time by touching
.
The ON/OFF button always has priority
in the switch off function.
Switching the cooking-zones on
Touch the heater selection button that
corresponds to the heater you wish to
cook on. A static dot will be shown on the
selected heater display and the blinking
dots on all other heater displays will no
longer illuminate.
Select the temperature setting by using the
increase heat setting button or decrease
heat setting button . The element is
now ready to cook on. For faster boil times,
select the desired cooking level and then
touch the P button to activate the Boost
function.
Switching the cooking-zones off
Select the element you want to switch off by
pressing the heater selection button. Using
the button, turn the temperature down to
´0`. (Also, pressing the and buttons
simultaneously turns the temperature to
´0`).
If the cooking zone is hot, ´H` will be
displayed instead of ´0`.
Switching all cooking-zones off
To turn all the cooking zones off at once,
press the button
In the stand-by mode, an ´H` appears on all
cooking zones which are hot.
Residual heat indicator
The residual heat indicator indicates that
the glass ceramic area has a temperature
that is dangerous to touch.
After switching off the cooking zone, the
respective display shows ´H` until the
corresponding cooking zone temperature is
at a safe level.
Smart Pause
Smart Pause, when activated, reduces
the power of all burners that have been
switched on.
If you then deactivate the Smart Pause,
the heaters will automatically return to the
previous level.
If the Smart Pause is not de-activated, the
cooktop will turn off after 30 minutes.
Touch ( ) to activate Smart Pause. The
power for the activated heater(s) will reduce
to level 1 and ´II` will appear at all displays.
Touch ( ) again to deactivate Smart
Pause. ´II` will disappear and the heaters
will now run at the level previously set.
Safety switch off function
A cooking zone will automatically be
swiched off if the heat setting has not been
modified for a specified duration of time. A
change in the heat setting of the cooking
zone resets the time duration to the initial
value. This initial value depends on the
selected temperature level.
Heat setting Safety switch off after
1-2 6 Hours
3-4 5 Hours
54 Hours
6-9 1.5 Hours
Child Lock
After switching on the appliance, the child
lock function can be activated. To activate
the child lock, simultaneously press the
increase heat setting button and
decrease heat setting button and then
press the increase heat setting key
again. ´L` indicating LOCKED will appear
on all heater displays and the controls
can not be used. (If a cooking zone is in
the hot condition, ´L`and ´H` will display
alternately).
The hob will remain in a locked condition
until unlocked, even if the appliance has
been switched off and on.
To deactivate the child lock, first switch
on the hob. Simultaneously press the
increase heat setting button and
decrease heat setting button and then
EN - 16
press the decrease heat setting button
again.´L`will no longer be displayed and the
hob will be switched off.
Key Lock
The key lock function is used to set
‘save mode’ on the appliance during
operation. It will not be possible to make
any adjustments by touching the buttons
(for example heat settings). It will only be
possible to switch the appliance off.
The lock function is active, if the key lock
button is pressed for at least 2 seconds.
This operation is acknowledged by a
buzzer. After successful operation, the key
lock Indicator flashes and the heater is
locked.
Timer Function
The timer function is available in two
versions:
Minute minder timer (1..99 min)
The minute minder timer can be operated
if the cooking zones are switched off. The
timer display shows ´00` with a blinking dot.
Touch to increase the time or touch
to decrease the time. The range is between
0 and 99 minutes. If there is no adjustment
to the displayed time within 10 seconds,
the minute minder timer will be set and the
blinking dot will disappear.Once the timer is
set, it begins to count down.
When the timer reaches zero, a signal
sounds and the timer display blinks. The
sound signal stops automatically after 2
minutes and/or by pressing any button.
The minute minder timer can be changed
or switched off anytime by using the timer
setting button and/or the decrease
timer button . Switching off the hob by
touching at anytime will also switch off
the minute minder timer.
Cooking zone timer (1..99 min)
When the hob is switched on, an
independent timer can be programmed for
every cooking zone.
Select a cooking zone, then select the
temperature setting and finally activate the
timer setting button , the timer can be
programmed to switch off a cooking zone.
Around the timer four LEDs are arranged.
These indicate which cooking zone the
timer has been set for.
10 seconds after the last operation, the
timer display changes to the timer that will
run out next (in cases where a timer is set
for more than one cooking zone).
When the timer has run down, a signal
sounds and the timer display shows ´00`
and, the assigned cooking zone timer LED
blinks. The programmed cooking zone will
be switched off and the ´H` will be displayed
if the cooking zone is hot.
The sound signal and the blinking of the
timer LED will be stopped automatically
after 2 minutes and/or by operating any
button.
Buzzer
While the hob is in operation, the following
activities will be signalled by the buzzer:
Normal button activation will be
accompanied with a short sound signal
Continuous button operation over a
longer period of time (10 seconds)
will be accompanied with a longer,
intermittent sound signal.
Boost Function
To use this function, a cooking zone must
be selected,with the desired cooking level
set. Then press the P(Boost) button.
The Boost function can only be activated
if it is applicable with the cooking zone
selected If Boost Function is active a ´P` is
shown on the corresponding display.
Activating the booster can exceed the
maximum power, in which case the
integrated power management will be
activated.
The necessary power reduction is shown
by the corresponding cooking zone display
blinking. Blinking is active for 3 seconds
and allows further adaptations of the
settings before power reduction.
Error Codes
If there is an error, an error code will be shown on the
heater displays.
E1 Cooling Fan is disabled. Call an authorised
service agent.
E3 Supply voltage is other than the rated values.
Switch the hob off by pressing ,wait until
H” disappears for all zones, switch the hob
on by pressing and continue to use. If
the same error is displayed again, call an
authorised service agent.
EN - 17
E4 Supply frequency is different from the rated
values. Switch the hob off by pressing
, wait until “H” disappears from all
zones, switch the hob on by pressing
and continue to use. If the same error is
displayed again, switch the plug for the
appliance off and on. Switch the hob on by
pressing and continue to use. If the same
error is displayed again, call an authorised
service agent.
E5 Internal temperature of the hob is too high,
switch the hob off by pressing and let the
heaters cool down.
E6 Communication error between the touch
control and heater. Call an authorised service
agent.
E7 Coil temperature sensor is disabled. Call an
authorized service agent.
E8 Cooler temperature sensor is disabled. Call
an authorized service agent.
EA Large Coil Saturation Error. Switch the hob
off by pressing on/off button, switch the hob
on by pressing on/off button and continue to
use. If the same error is displayed again, call
an authorised service agent.
EC Supply Voltage Error.Switch the hob off by
pressing on/off button, switch the hob on by
pressing on/off button and continue to use.
If the same error is displayed again, call an
authorised service agent.
C1-C8 Mcroprocessor alert. Switch the hob off by
pressing on/off button, switch the hob on by
pressing on/off button and continue to use.
If the same error is displayed again, call an
authorised service agent.
5. CLEANING AND
MAINTENANCE
5.1 CleaninG
WARNING: Switch off the appliance
and allow it to cool before cleaning is
to be carried out.
General Instructions
Check whether the cleaning materials
are appropriate and recommended by
the manufacturer before use on your
appliance.
Use cream cleaners or liquid cleaners
which do not contain particles. Do not
use caustic (corrosive) creams, abrasive
cleaning powders, rough wire wool or
hard tools as they may damage the
cooker surfaces.
Do not use cleaners that contain
particles, as they may scratch the
glass, enamelled and/or painted parts
of your appliance.
Should any liquids overflow, clean them
immediately to avoid parts becoming
damaged.
Do not use steam cleaners for
cleaning any part of the appliance.
Cleaning the Ceramic Glass
Ceramic glass can hold heavy utensils but
may be broken if it is hit with a sharp object.
WARNING : Ceramic Cooktops - if the
surface is cracked, to avoid the
possibility of an electric shock, switch
off the appliance and call for service.
Use a cream or liquid cleaner to clean
the vitroceramic glass. Then, rinse and
dry them thoroughly with a dry cloth.
Do not use cleaning materials meant
for steel as they may damage the
glass.
If substances with a low melting point
are used in the cookware’s base or
coatings, they can damage the glass-
ceramic cooktop.If plastic, tin foil, sugar
or sugary foods have fallen on the hot
glass-ceramic cooktop, please scrape
it off the hot surface as quickly and as
safely as possible. If these substances
melt, they can damage the glass-
ceramic cooktop. When you cook very
sugary items like jam, apply a layer of a
suitable protective agent beforehand if it
is possible.
Dust on the surface must be cleaned
with a wet cloth.
Any changes in colour to the ceramic
glass will not affect the structure or
durability of the ceramic and is not due
to a change in the material.
Colour changes to the ceramic glass may
be for a number of reasons:
1. Spilt food has not been cleaned off the
surface.
2. Using incorrect dishes on the hob will
erode the surface.
3. Using the wrong cleaning materials.
Cleaning the Stainless Steel Parts (if
available)
Clean the stainless steel parts of your
appliance on a regular basis.
Wipe the stainless steel parts with a soft
cloth soaked in only water. Then, dry
EN - 18
them thoroughly with a dry cloth.
Do not clean the stainless steel parts
while they are still hot from cooking.
Do not leave vinegar, coffee, milk, salt,
water, lemon or tomato juice on the
stainless steel for a long time.
EN - 19
6. TROUBLESHOOTING&TRANSPORT
6.1 troubleShootinG
If you still have a problem with your appliance after checking these basic troubleshooting
steps, please contact an authorised service person or qualified technician.
Problem Possible Cause Solution
Hob control card’s display is
blacked out. The hob or cooking
zones cannot be switched on. There is no power supply.
Check the household fuse for the
appliance.
Check whether there is a power cut by
trying other electronic appliances.
The hob switches off while it is in
use and an 'F' flashes on each
display.
The controls are damp or an object
is resting on them. Dry the controls or remove the object.
The hob switches off while it is
use. One of the cooking zones has been
on for too long. You can use the cooking zone again
by switching it back on.
The hob controls are not working
and the child lock LED is on. Child lock is active. Switch off the child lock.
The saucepans make noise
during cooking or your hob makes
a clicking sound during cooking.
This is normal with induction hob
cookware. This is caused by the
transfer of energy from the hob to
the cookware.
This is normal. There is no risk,
neither to your hob nor to your
cookware.
The 'U' symbol lights up in the
display of one of the cooking
zones.
There is no pan on the cooking
zone, or the pan is unsuitable. Use a suitable pan.
Power level 9 or 'P' is
automatically reduced. If you
select power level 'P' or 9 on two
cooking zones, which are on the
same side, at the same time.
Maximum power level for the two
zones is reached
Operating both zones at power level
'P' or 9 would exceed the permitted
maximum power level for the two
zones.
6.2 tranSport
If you need to transport the product, use the original product packaging and carry it using
its original case. Follow the transport signs on the packaging. Tape all independent parts to
the product to prevent damaging the product during transport.
If you do not have the original packaging, prepare a carriage box so that the appliance,
especially the external surfaces of the product, is protected against external threats.
PL - 2
Symbol Typ Znaczenie
 Ryzyko poważnych obrażeń lub śmierci

 Ryzyko dotyczące niebezpiecznego napięcia
 Ostrzeżenie; ryzyko pożaru / materiały łatwopalne
PRZESTROGA Ryzyko urazu lub uszkodzenia mienia
 Prawidłowe korzystanie z systemu

Niniejsza instrukcja obsługi zawiera ważne informacje dotyczące bezpieczeństwa i
wytyczne użytkowania oraz konserwacji urządzenia.
Prosimy o poświęcenie czasu na zapoznanie się z niniejszą instrukcją obsługi przed
użyciem urządzenia i zachowanie jej w celu późniejszego wykorzystania.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40

KLUGE KPI3000B Instrukcja obsługi

Typ
Instrukcja obsługi

w innych językach