Thrustmaster 2960760 Instrukcja obsługi

- USER MANUAL

- MANUEL DE L’UTILISATEUR

- BENUTZERHANDBUCH

- HANDLEIDING

- MANUALE D’USO

- MANUAL DEL USUARIO

- MANUAL DO UTILIZADOR

 РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ

 ΕΓΧΕΙΡΙΙΟ ΧΡΗΣΗΣ

 KULLANIM KILAVUZU

 INSTRUKCJA OBSŁUGI

1/16

FOR PLAYSTATION®3 – PLAYSTATION®4

User Manual

WARNING:

To ensure that your T300 Ferrari GTE Wheel functions correctly

with games for PlayStation®3 or PlayStation®4,

you may be required to install the games’ automatic updates

(available when your console is connected to the Internet).

2/16

TECHNICAL FEATURES

1 T300 RS base

2 Ferrari GTE Wheel

3 2 sequential paddle shifters (Up & Down)

4 Directional buttons

5 PS4™ or PS3™ USB sliding switch

6 MODE button + red/green indicator light

7 SELECT/START buttons on PS3™ and

SHARE/OPTIONS on PS4™

8 PS button

9 Large threaded hole (for attachment system

and fastening screw)

10 Attachment system

11 Metal fastening screw

12 Thrustmaster Quick Release

13 L3/R3 buttons

14 Power supply connector (type A or B)

(varies from one country to another)

15 Racing wheel USB cable and connector

16 Shifter (gearbox) connector

(sold separately)

17 Pedal set connector

3/16

PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET:

PLEASE READ BEFORE PROCEEDING!

Your racing wheel’s power supply varies according to the country where you purchased your device.

The power supply can be:

Internal, with:

* a power supply unit located directly inside the racing wheel’s base, with a type A

connector.

* a 220-240 V power supply cable.

= compatible only with 220-240 V electrical power.

Never connect the 220-240 V cable

to a 100-130 V electrical outlet!!!

Never connect this cable to a power adapter!!!

Internal, with:

* a power supply unit located directly inside the racing wheel’s base, with a type A

connector.

* a 100-125 V power supply cable.

= compatible only with 100-125 V electrical power.

Never connect the 100-125 V cable

to a 220-240 V electrical outlet!!!

Never connect this cable to a power adapter!!!

IMPORTANT: if you do not know which voltage is supplied in the area in which you are using

your racing wheel, please ask your local electricity supplier.

External, with:

* an external power supply unit, with a type B connector.

* a power supply cable.

= compatible with all electrical voltages, from 110-240 V.

4/16

WARNINGS

Before using this product, please read this manual carefully and save it for later reference.

Warning – Electrical shock

* Keep the product in a dry location and do not expose it to dust or sunlight.

* Do not twist or pull on the connectors and cables.

* Do not spill any liquid on the product or its connectors.

* Do not short-circuit the product.

* Never dismantle the product; do not throw it onto a fire and do not expose it to high temperatures.

* Do not use a power supply cable other than the one provided with your racing wheel.

* Do not use the power supply cable if the cable or its connectors are damaged, split or broken.

* Make sure that the power supply cable is properly plugged into an electrical outlet, and properly

connected to the connector at the rear of the racing wheel’s base.

* Do not open up the racing wheel: there are no user-serviceable parts inside. Any repairs must be

carried out by the manufacturer, its authorized representative or a qualified technician.

* Only use attachment systems/accessories specified by the manufacturer.

* If the racing wheel is operating abnormally (if it is emitting any abnormal sounds, heat or odors), stop

using it immediately, unplug the power supply cable from the electrical outlet and disconnect the other

cables.

* If you will not be using the racing wheel for an extended period of time, unplug its power supply cable

from the electrical outlet.

Air vents

Make sure not to block any of the air vents on the racing wheel’s base. For optimal ventilation, make sure

to do the following:

* Position the wheel’s base at least 10 cm away from any wall surfaces.

* Do not place the base in any tight spaces.

* Do not cover the base.

* Do not let any dust build up on the air vents.

For safety reasons, never use the pedal set with bare feet

or while wearing only socks on your feet.

THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF

INJURY RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES.

Warning – Injuries due to Force Feedback and repeated movements

Playing with a Force Feedback racing wheel may cause muscle or joint pain. To avoid any problems:

* Avoid lengthy gaming periods.

* Take 10 to 15 minute breaks after each hour of play.

* If you feel any fatigue or pain in your hands, wrists, arms, feet or legs, stop playing and rest for a few

hours before you start playing again.

5/16

Warning – Injuries due to Force Feedback and repeated movements (continued)

* If the symptoms or pain indicated above persist when you start playing again, stop playing and

consult your doctor.

* Keep out of children’s reach.

* During gameplay, always leave both hands correctly positioned on the wheel without letting it go

completely.

* During gameplay, never place your hands or your fingers under the pedals or anywhere near the

pedal set.

* During calibration and gameplay, never place your hand or your arm through the openings in the

racing wheel.

* Make sure that the racing wheel’s base is properly secured, as per this manual’s instructions.

Product to be handled only by users

16 years of age or older

HEAVY PRODUCT

Be careful not to drop the product on

yourself or on anyone else!

ALWAYS NEVER NEVER

6/16

Warning – Pedal set pinch hazard when playing

* Keep the pedal set out of children’s reach.

* During gameplay, never place your fingers on or anywhere near the sides of the pedals.

* During gameplay, never place your fingers on or anywhere near the pedals’ rear base.

* During gameplay, never place your fingers on or anywhere near the pedals’ front base.

NEVER NEVER NEVER

Warning – Pedal set pinch hazard when not playing

* Store the pedal set in a safe place, and keep it out of children’s reach.

UPDATING YOUR RACING WHEEL’S FIRMWARE

The firmware included in your racing wheel’s base can be updated to a more recent version featuring

product enhancements.

To display the firmware version that your racing wheel is currently using and update it if required: on

PC, visit http://support.thrustmaster.com. Click Racing Wheels / T300 Ferrari GTE, then select

Firmware and follow the instructions describing the download and installation procedure.

Important note:

On PC, the USB sliding switch (5) on the racing wheel’s base must always be set to the PS3™

position.

7/16

INSTALLING THE FERRARI GTE WHEEL ON ITS BASE

Align the connector positions using the arrows:

Base (1) connector: Arrow pointing upwards

Racing wheel (2) connector: Arrow pointing upwards

Once the connectors are correctly positioned, simply rotate the Thrustmaster Quick Release (12) device’s

ring counterclockwise, while holding the racing wheel (2) in position.

Then, tighten the ring as much as you can: to do so, hold the ring in position and rotate the racing wheel

clockwise.

Once you have installed the Ferrari GTE Wheel, rotate it 180° (when facing the wheel, the Ferrari® logo

should be upside down) to access the small attachment screw located on the ring of the Thrustmaster

Quick Release (12) device. Use a large Phillips screwdriver to tighten the small attachment screw (do not

use excessive force), turning it clockwise.

Do not use excessive force when tightening the small attachment screw

(using a Phillips screwdriver)!

Stop turning the screw as soon as you feel some resistance.

8/16

ADJUSTING THE PEDALS’ HEIGHT AND SPACING

Using a Phillips screwdriver (not included), remove the 2 attachment screws holding the pedal heads to

the pedal arms.

Next, adjust the pedal heads’ height and spacing to suit your preferred driving style:

- 6 different positions are available for the gas pedal.

- 6 different positions are available for the brake pedal.

Once you are happy with the height and spacing, replace and re-tighten the 2 attachment screws

holding the pedal heads to the pedal arms.

ATTACHING THE RACING WHEEL

Attaching the racing wheel to a table or a desktop

1. Place the racing wheel on a table or any other horizontal, flat and stable surface.

2. Insert the fastening screw (11) in the attachment system (10), then tighten the device by turning

the screw counterclockwise, so that it feeds into the large threaded hole (9) located beneath the

racing wheel, until the wheel is perfectly stable.

ALWAYS NEVER

WARNING: Never tighten the screw alone, without the attachment system in place!

(This could damage the racing wheel.)

9/16

ATTACHMENT /

REMOVAL

DIRECTION

To tighten:

Turn the screw

counterclockwise

To release:

Turn the screw

clockwise

10/16

Attaching the racing wheel’s base to a cockpit

1. Place the racing wheel’s base on the cockpit shelf.

2. Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small

screw threads located on the underside of the racing wheel.

Important: The length of the two M6 screws must not exceed the thickness of the shelf + 12 mm;

longer screws could cause damage to internal components located in the racing wheel’s base.

3. If required, tighten the standard attachment system by inserting the fastening screw in the large

threaded hole.

Attaching the pedal set to a cockpit

1. Attach the pedal set using the small screw threads located on its underside.

2. Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small

screw threads located on the underside of the pedal set.

Important: The length of the two M6 screws must not exceed the thickness of the shelf + 10 mm;

longer screws could cause damage to internal components located in the pedal set.

PLAYSTATION®3 AND PLAYSTATION®4 MAPPING

11/16

SETTING UP THE RACING WHEEL FOR PLAYSTATION®3 OR

PLAYSTATION®4

1. Connect the pedal set to the connector (17) located at the back of the racing wheel's base.

2. Connect the power supply cable to the connector (14) located at the back of the racing wheel's

base.

3. Plug the power supply cable into an electrical outlet with the same voltage specifications.

For more information about this, please refer to the PLUGGING THE RACING

WHEEL INTO AN ELECTRICAL OUTLET section, on page 3 in this manual.

4. Set the USB sliding switch (5) on the racing wheel’s base to either the PS3™ or PS4™ position,

depending on the console or the game you are using.

5. Connect the racing wheel’s USB connector (15) to one of the console’s USB ports.

6. Once your console is powered on, your racing wheel will calibrate itself automatically.

7. On PlayStation®4 (when the USB sliding switch is set to the PS4™ position): press the racing

wheel’s PS button (8) and sign in to your Sony Entertainment Network account, in order to be able

to use the wheel.

You are now ready to play!

Important notes:

- The USB sliding switch (5) on the racing wheel’s base must always be set to the proper

position (PS3™ or PS4™) before connecting the wheel’s USB cable to the console. To change

the sliding switch’s position, disconnect the USB cable from the console and then change the

position of the switch before reconnecting the USB cable to the console.

- On PlayStation®3, the USB sliding switch (5) must always be set to the PS3™ position:

* The wheel is recognized in most games as a T500RS wheel.

* The wheel is functional in compatible games and in console menus.

* The “PS” function is functional on the wheel.

- On PlayStation®4, with the USB sliding switch (5) in the PS3™ position:

* The wheel is recognized in most games as a T500RS wheel.

* The wheel is functional in compatible games, but not in console menus.

* The “SHARE” and “PS” functions are not functional on the wheel.

- On PlayStation®4, with the USB sliding switch (5) in the PS4™ position:

* Don't forget to press the racing wheel’s PS button (8) in order to be able to use the wheel.

* The wheel is recognized in most games as a T300 RS wheel.

* The wheel is functional in compatible games and in console menus.

* The “SHARE” and “PS” functions are functional on the wheel.

- The list of PlayStation®3 and PlayStation®4 games compatible with the T300 (along with the

required position for the USB sliding switch (5) according to the game being played) is

available at:

http://support.thrustmaster.com

(click Racing Wheels / T300 Ferrari GTE / Games settings).

This list is updated regularly.

12/16

SETTING UP THE RACING WHEEL FOR PC*

* PC compatibility not tested nor endorsed by Sony Interactive Entertainment Europe.

For more information, visit http://support.thrustmaster.com.

AUTOMATIC RACING WHEEL AND PEDAL SET CALIBRATION

The wheel automatically self-calibrates when you plug the racing wheel into an electrical outlet and

connect the racing wheel’s USB connector to the console.

During this phase, the racing wheel will rotate quickly towards the left and the right, covering a 1080

degree angle, before stopping at the centre.

WARNING:

Never touch the racing wheel during the self-calibration phase!

(This could result in improper calibration and/or personal injuries.)

AUTOMATIC CALIBRATION OF THE PEDAL SET

Never connect the pedal set to the racing wheel’s base (or disconnect it from the base) when it is

connected to the console or during gameplay (this could result in improper calibration).

Always connect the pedal set before connecting the racing wheel to the console.

Once the racing wheel’s calibration is complete and the game has been started, the pedals are

automatically calibrated after a few presses.

WARNING:

Never press the pedals during the racing wheel's

self-calibration phase or while a game is loading!

(This could result in improper calibration.)

If your racing wheel and/or pedal set do not function correctly, or if they seem to be improperly

calibrated:

Power off your console and completely disconnect the racing wheel. Then reconnect all cables

(including the power supply cable and the pedal set), and restart your console and your game.

INTERNAL TEMPERATURE SENSOR

The wheel’s cooling system is composed of a heat sink and a fan.

• A thermostat monitors the wheel’s internal temperature.

• When you are using the wheel in a game:

- The cooling fan starts up when the wheel has reached a certain temperature (after a few minutes

of gameplay, depending on the strength of the Force Feedback effects used).

- The power of the Force Feedback effects automatically decreases as soon as the wheel reaches

a much higher temperature level (to protect the motor). The power of these effects automatically

increases as soon as the temperature slightly decreases.

• When you’re done playing: due to the motor’s thermal inertia, the cooling fan continues to operate

until the temperature drops below the fan’s startup level. Your wheel has been designed in this way

in order to facilitate cooling, and to protect the motor (this may take from 5 to 45 minutes, depending

on the temperature reached while using the wheel in a game).

13/16

MODE BUTTON AND INDICATOR LIGHT (6)

MODE button for the pedal set

The pedal set included with the T300 Ferrari GTE Wheel features 2 pedals.

When using this pedal set, make sure that the indicator light remains red, or else the gas pedal will not

function properly.

The T300 Ferrari GTE Wheel is also compatible with Thrustmaster pedal sets featuring 3 pedals (sold

separately); these allow you to electronically swap the accelerator and clutch pedals.

To do so, simply press the MODE button (6) for 2 seconds.

The racing wheel’s internal memory stores whether the pedals have been swapped around or not.

GAS AND CLUTCH PEDALS

Color of the MODE indicator light (6)

NORMAL

RED

SWAPPED AROUND GREEN

Other information regarding the MODE button

To learn more about the MODE button and indicator light, please visit

http://support.thrustmaster.com. Click Racing Wheels / T300 Ferrari GTE, and then select Manual

or FAQ.

HELP FILES AND FAQS (NOT INCLUDED IN THIS MANUAL)

Please visit http://support.thrustmaster.com. Click Racing Wheels / T300 Ferrari GTE, and then

select Manual or FAQ.

14/16

CONSUMER WARRANTY INFORMATION

Worldwide, Guillemot Corporation S.A., whose registered office is located at Place du Granier, B.P. 97143,

35571 Chantepie, France (hereinafter “Guillemot”) warrants to the consumer that this Thrustmaster product shall

be free from defects in materials and workmanship, for a warranty period which corresponds to the time limit to

bring an action for conformity with respect to this product. In the countries of the European Union, this

corresponds to a period of two (2) years from delivery of the Thrustmaster product. In other countries, the

warranty period corresponds to the time limit to bring an action for conformity with respect to the Thrustmaster

product according to applicable laws of the country in which the consumer was domiciled on the date of

purchase of the Thrustmaster product (if no such action exists in the corresponding country, then the warranty

period shall be one (1) year from the original date of purchase of the Thrustmaster product).

Should the product appear to be defective during the warranty period, immediately contact Technical Support,

who will indicate the procedure to follow. If the defect is confirmed, the product must be returned to its place of

purchase (or any other location indicated by Technical Support).

Within the context of this warranty, the consumer’s defective product shall, at Technical Support’s option, be

either replaced or returned to working order. If, during the warranty period, the Thrustmaster product is subject to

such reconditioning, any period of at least seven (7) days during which the product is out of use shall be added

to the remaining warranty period (this period runs from the date of the consumer’s request for intervention or

from the date on which the product in question is made available for reconditioning, if the date on which the

product is made available for reconditioning is subsequent to the date of the request for intervention). If

permitted under applicable law, the full liability of Guillemot and its subsidiaries (including for consequential

damages) is limited to the return to working order or the replacement of the Thrustmaster product. If permitted

under applicable law, Guillemot disclaims all warranties of merchantability or fitness for a particular purpose.

This warranty shall not apply: (1) if the product has been modified, opened, altered, or has suffered damage as a

result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause unrelated to a

material or manufacturing defect (including, but not limited to, combining the Thrustmaster product with any

unsuitable element, including in particular power supplies, rechargeable batteries, chargers, or any other

elements not supplied by Guillemot for this product); (2) if the product has been used for any use other than

home use, including for professional or commercial purposes (game rooms, training, competitions, for example);

(3) in the event of failure to comply with the instructions provided by Technical Support; (4) to software, said

software being subject to a specific warranty; (5) to consumables (elements to be replaced over the product’s

lifespan: disposable batteries, audio headset or headphone ear pads, for example); (6) to accessories (cables,

cases, pouches, bags, wrist-straps, for example); (7) if the product was sold at public auction.

This warranty is nontransferable.

The consumer’s legal rights with respect to laws applicable to the sale of consumer goods in his or her country

are not affected by this warranty.

Additional warranty provisions

During the warranty period, Guillemot shall not provide, in principle, any spare parts, as Technical Support is the

only party authorized to open and/or recondition any Thrustmaster product (with the exception of any

reconditioning procedures which Technical Support may request that the consumer carry out, by way of written

instructions – for example, due to the simplicity and the lack of confidentiality of the reconditioning process – and

by providing the consumer with the required spare part(s), where applicable).

Given its innovation cycles and in order to protect its know-how and trade secrets, Guillemot shall not provide, in

principle, any reconditioning notification or spare parts for any Thrustmaster product whose warranty period has

expired.

In the United States of America and in Canada, this warranty is limited to the product’s internal mechanism and

external housing. In no event shall Guillemot or its affiliates be held liable to any third party for any consequential

or incidental damages resulting from the breach of any express or implied warranties. Some States/Provinces

do not allow limitation on how long an implied warranty lasts or exclusion or limitation of liability for consequential

or incidental damages, so the above limitations or exclusions may not apply to you. This warranty gives you

specific legal rights, and you may also have other rights which vary from State to State or Province to Province.

15/16

Liability

If permitted under applicable law, Guillemot Corporation S.A. (hereinafter “Guillemot”) and its subsidiaries

disclaim all liability for any damages caused by one or more of the following: (1) the product has been

modified, opened or altered; (2) failure to comply with assembly instructions; (3) inappropriate or abusive

use, negligence, an accident (an impact, for example); (4) normal wear; (5) the use of the product for any

use other than home use, including for professional or commercial purposes (game rooms, training,

competitions, for example). If permitted under applicable law, Guillemot and its subsidiaries disclaim all

liability for any damages unrelated to a material or manufacturing defect with respect to the product

(including, but not limited to, any damages caused directly or indirectly by any software, or by combining the

Thrustmaster product with any unsuitable element, including in particular power supplies, rechargeable

batteries, chargers, or any other elements not supplied by Guillemot for this product).

DECLARATION OF CONFORMITY

CANADIAN COMPLIANCE NOTICE: this Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

USA COMPLIANCE NOTICE: this equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired

operation.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment on and

off, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

TECHNICAL SUPPORT

https://support.thrustmaster.com

UK: 020 3147 4889

US: (866) 889-5036

Canada: 866-889-2181

16/16

COPYRIGHT

of Guillemot Corporation S.A. Manufactured and distributed by Guillemot Corporation S.A. All

other trademarks and brand names are hereby acknowledged and are the property of their

respective owners. Contents, design, and specifications are subject to changes without notice

and may vary from one country to another. Photos and illustrations not binding. Designed in

North America and Europe, made in China.

Ferrari® is a registered trademark of Ferrari Idea S.p.A.

For use exclusively with PlayStation®4 consoles and PlayStation®3 consoles.

“1”, “PlayStation”, “PS5”, “PS4” and “PlayStation Shapes Logo” are registered trademarks or

the property of their respective owners. Manufactured and distributed under license from

Sony Interactive Entertainment LLC.

ENVIRONMENTAL PROTECTION RECOMMENDATION

In the European Union and Turkey: At the end of its working life, this product should not be

disposed of with standard household waste, but rather dropped off at a collection point for the

disposal of Waste Electrical and Electronic Equipment (WEEE) for recycling.

This is confirmed by the symbol found on the product, user manual or packaging.

Depending on their characteristics, the materials may be recycled. Through recycling and

other forms of processing Waste Electrical and Electronic Equipment, you can make a

significant contribution towards helping to protect the environment.

Please contact your local authorities for information on the collection point nearest you.

For all other countries: Please adhere to local recycling laws for electrical and electronic

equipment.

Retain this information. Colors and decorations may vary.

Plastic fasteners and adhesives should be removed from the product before it is used.

www.thrustmaster.com

*Applicable to EU, UK and Turkey only

*

WARNING: this product can expose you to chemicals including Bisphenol A (BPA),

which is known to the State of California to cause birth defects or other reproductive harm. For

more information go to www.P65Warnings.ca.gov

1/16

POUR PLAYSTATION®3 – PLAYSTATION®4

Manuel de l’utilisateur

ATTENTION :

Pour que le volant T300 Ferrari GTE Wheel fonctionne correctement

avec les jeux PlayStation®3 ou PlayStation®4,

il peut être nécessaire d’installer les mises à jour automatiques de ces jeux

(disponibles lorsque votre console est connectée à Internet).

2/16

CARACTERISTIQUES TECHNIQUES

1 Base T300 RS

2 Roue Ferrari GTE

3 2 leviers séquentiels de changement de

vitesse (Up & Down)

4 Croix multidirectionnelle

5 Sélecteur USB PS4™ ou PS3™

6 Bouton MODE + Voyant lumineux rouge/vert

7 Boutons SELECT/START sur PS3™

et SHARE/OPTIONS sur PS4™

8 Bouton PS

9 Gros pas de vis (pour le système de

fixation et la vis de serrage)

10 Système de fixation

11 Vis de serrage métallique

12 Thrustmaster Quick Release

13 Boutons L3 / R3

14 Connecteur type A ou B pour l’alimentation

secteur (diffère d’un pays à l’autre)

15 Câble et connecteur USB du volant

16 Connecteur pour la boîte de vitesses

(vendue séparément)

17 Connecteur pour le pédalier

3/16

RELIER LE VOLANT AU SECTEUR = A LIRE IMPERATIVEMENT

En fonction du pays où vous avez acheté votre volant, l’alimentation secteur de votre volant diffère.

Elle est :

Soit interne avec :

* Boitier d’alimentation directement dans la base du volant avec connecteur type A

* Câble d’alimentation secteur 220-240V.

= uniquement compatible avec du courant 220-240V.

Ne jamais brancher le câble 220-240V

sur une prise de courant 100-130V !!!

Ne jamais relier ce câble à un adaptateur secteur !!!

Soit interne avec :

* Boitier d’alimentation directement dans la base du volant avec connecteur type A

* Câble d’alimentation secteur 100-125V.

= uniquement compatible avec du courant 100-125V.

Ne jamais brancher le câble 100-125V

sur une prise de courant 220-240V !!!

Ne jamais relier ce câble à un adaptateur secteur !!!

IMPORTANT : Si vous ne connaissez pas le voltage de la zone

dans laquelle vous utilisez le volant, reportez-vous- au fournisseur local d’électricité.

Soit externe avec :

* Boitier d’alimentation externe à la base du volant avec connecteur type B

* Câble d’alimentation secteur

= compatible avec tout type de courant 110-240V.

Strona się ładuje...

Thrustmaster 2960760 Instrukcja obsługi

Thrustmaster 2960760 Instrukcja obsługi

w innych językach

Powiązane artykuły