MK Diamond Products MK-APC/H Instrukcja obsługi
- Typ
- Instrukcja obsługi
MK-APC/H Air Powered Chop Saw
The MK-APC/H Handheld Air Powered Chop Saw is portable with a non-slop belt designed to improve power
transfer. The MK-APC/H has the benefits of an air motor with no performance loss when compared to conven-
tionally powered competitors. This saw can be used in the same way as a conventional gas high speed saw, but
without having to worry about rocking of saw during cutting. This saw is ideal for concrete pile cutting, demolition
and pipe cutting at below grade. An easy to read oiler is included for quick check of fluid levels by the operator.
Air Requirement 85 cfm of air at 80 psi
Blade Capacity 14"
Depth of Cut 5"
L x W x H (inches)
L x W x H (mm)
37" x 9-1/2" x 19"
940 x 241 x 483
Weight 24 lbs. (11kg)
Part# 167989
AIR SAW HOSE
For use on the MK-APC/H
Part#
169217
Blades not included
https://twitter.com/MKDiamondhttps://www.facebook.com/mkdiamondproducts
1315 Storm Parkway, Torrance, CA 90501 | P 800.421.5830 | F 310.539.5158
www.mkdiamond.com |
© 2020 MK Diamond Products, Inc. All Rights Reserved. Images and specifications are subject to change without notice. MK-APC/H Sell Sheet Part # AP080259 (06/20)
MK-APC/W Air Powered Walk Behind Concrete Saw
The MK-APC/W Air Powered Walk Behind Concrete Saw has a 9.5 hp pneumatic motor with gear box drive. The
rugged tubular steel design provides a rigid base from which the pneumatic motor is fixed to the blade guard. De-
signed for tough cutting jobs, this saw is ideal for joint widening, indoor floor sawing, trenching and patch work.
Model MK-APC/W-14 MK-APC/W-20
Air Requirement 85 cfm of air at 80 psi 85 cfm of air at 80 psi
Blade Capacity 14" 20"
Depth of Cut 5" 7"
L x W x H (inches)
L x W x H (mm)
42" x 19" x 41"
1,067 x 483 x 1,041
42" x 19" x 41"
1,067 x 483 x 1,041
Weight 106 lbs. (48kg) 108 lbs (49kg)
Part# 168286 167990
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov
!
-
1
-
2
