THE WORLD MODELS Sky Raider Mach II Instrukcja obsługi

THE WORLD MODELS
Marka
THE WORLD MODELS
Model
Sky Raider Mach II
Kategoria
Zabawki
Typ
Instrukcja obsługi
Wing Span 54.0 in / 1370 mm
Wing Area
Flying Weight
Fuselage Length 5 lb / 2200 g
556 sq in / 35.9 sq dm
47.5 in / 1210 mm
Warning ! This model is not a toy.
It is designed for maximum performance. Please seek advice if one is not familiar with this kind
of engine powered precision model. Operating this model without prior preparation may cause
injuries Remember, safety is the most important thing. Always keep this instruction manual at
hand for quick reference.
.
*Specifications are subject to change without notice.*
Specifications
S K Y R A I D E R
M a c h I I
INSTRUCTION MANUAL
Requires: 4- channel w/ 4 standard servos radio
0.40 0 46 Cubic inch displacement 2 stroke - . -
A
L
M
O
S
T
-
R
E
A
D
Y
-
T
O
-
F
L
Y
FACTORY PRE-FABRICATED
ALMOST-READY-TO-FLY (ARF) SERIES
MADE IN CHINA
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
INDEX
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
BEFORE YOU BEGIN
P.1
P.2
P.3-11
P.11
P.1
S K Y R A I D E R
M a c h I I
Read through the manual before you begin, so that you can have an overall idea of what to do.
1
Check all parts. If you find any defective or missing parts contact your local dealer. Please
DRY FITand check for defects for all parts that will require CA or Epoxy for final assembly.
Any parts you find to be defective after the gluing process may be difficult to remove for
warranty replacement. The manufacturer will replace any defective parts, but will not extend
to the parts that are good before gluing to defective parts during assembly. Warranty will
not cover any parts modified by customer
.
2
Symbols used throughout this instruction manual comprise of the following : -
3
Do not overlook this symbol!
Cut off shaded portion.
Peel off shaded portion
covering film.
Pay close attention here!
Pierce the shaded portion
covering film.
Must be purchased separately!
Drill holes with the specified
diameter (here: 3mm).
Ensure smooth non-binding
movement while assembling.
Apply instant glue
(C.A.glue, super glue.)
Assemble left and right
sides the same way.
Apply epoxy glue.
Apply thread locker
3mm
Warning!
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
1.MAIN WING -- 1 pair
2.WING JOINER 6x26x149.4mm -- 1 pc.
3.PLYWOOD 3x8x22mm -- 1 pc.
RING
Ø2.3mm PL4112023 -- 2 pcs
4.STRAPER PL4112102 -- 2 pcs
CLEVIS PL4112103 -- 2 pcs
FUEL TUBE Ø6X5mm -- 4 pcs
PUSHROD Ø1.8X135mm W/Threds (For Aileron) -- 2 pcs
5.FUSELAGE -- 1 pc.
STABILIZER & ELEVATOR -- 1 set
6.VERTICAL FIN & RUDDER -- 1 set
SCREW PM3X65mm -- 2 pcs
WASHER d3xD7mm -- 2 pcs
7.MAIN LANDING GEAR -- 1 set
COLLAR Ø4.1mm w/set screw -- 4 sets
MAIN WHEEL Ø62mm -- 2 pcs
SCREW PA3x10mm -- 4 pcs
MOUNTING PLATE 10x20mm PL4114020 -- 2 pcs
8.TAIL LANDING GEAR -- 1 set
COLLAR Ø2.1mm w/set screw -- 1 set
TAIL WHEEL Ø25x9mm -- 1 pc.
ALUMINUM REINFORCEMENT PLATE 0.3mm -- 1pc.
SCREW PA3X12mm -- 2 pcs
SCREW PM2X12mm -- 1 pc.
M2 NUT -- 1 pc.
9.ENGINE MOUNT PL5111030 -- 1 set
SOCKET HEAD SCREW M3x20mm -- 4 pcs
WASHER d3xD7mm -- 4 pcs
10. FUEL TANK 260cc -- 1 set
DOUBLE-SIDED TAPE 40X100mm -- 1 pc.
CABLE TIE (FOR FUEL TANK) 1.5x5x400mm -- 1 pc.
11.LINKAGE CONNECTOR Ø2.1mm w/ set screw
HW7111060
-- 1 set
12.PUSHROD Ø1.8x685mm w/Threads (For Elevator) -- 1 pc.
SCREW PB2X12mm -- 3 pcs
TRI-HORN M3x14mm PL4111221 -- 1 set
FUEL TUBE
Ø6X5mm -- 1 pc.
CLEVIS PL4112103 -- 1 pc.
13.PUSHROD Ø1.8x685mm w/ Threads (For Rudder) -- 1 pc.
SCREW PB2x12mm -- 3 pcs
TRI-HORN M3x14mm PL4111221 -- 1 set
FUEL TUBE Ø6X5mm -- 1 pc.
CLEVIS PL4112103 -- 1 pc.
14.ALUMINUM PLATE 1mm -- 1 pc.
WASHER d2xD5mm -- 4 pcs
SCREW PM2x10mm -- 4 pcs
SCREW M3x25mm -- 4 pcs
WASHER d3XD7mm -- 8 pcs
M2 NUT -- 4 pcs
M3 NUT -- 8PCS
SPINNER Ø52mm PL2111052N --1 set
15.THROTTLE PUSHWIRE Ø1.2x340mm -- pc.
PLASTIC TUBE d2xD3x240mm -- 1 pc.
STRAPER PL4112102 -- 2 pcs
FUEL TUBE Ø6x5mm -- 2 pcs
SPONGE 60x70x89mm -- 1 pc.
16.SCREW HM4x30mm -- 2 pcs
WASHER d4XD12mm -- 2 pcs
17.CANOPY -- 1 pc.
DOUBLE - SIDED TAPE -- 1 pc.
SCREW PWA2.3X8mm -- 4 pcs
SILICON GROMMET d1.5xD6.5mm -- 4 pcs
18.DECALS: A178NDEC -- 1 set
COVERING:--
GREEN COLOR SCHEME
TOUGHLON STLA178NGWIG
TOUGHLON STLA178NGFUS
TOUGHLON STL100 WHITE
TOUGHLON STL204 CREAM
TOUGHLON STL240 GREEN
TOUGHLON STL571 RICH GOLD
RED COLOR SCHEME
TOUGHLON STLA178NRWIG
TOUGHLON STLA178NRFUS
TOUGHLON STL100 WHITE
TOUGHLON STL201 BLACK
TOUGHLON STL311 FERRARI RED
TOUGHLON STL314 FUCHSIA
Parts List
P.2
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
Main Wing
P.3
1
Pre-glued
Aileron Servo
3
Make sure to glue securely. If not properly
glued, a failure in flight may occur.
Main Wing
2
Completed
Wing Joiner Ø6x26x149.4mm
Please dry fit wing joiner into left and right wing to make sure they fit with the proper
dihedral angle, mark the wing joiner if necessary. Apply epoxy glue to both sides of
all surfaces in contact. Use a stick to apply the glue to inner side of wing joiner sleeve,
and apply the glue to wing joiner before putting them together. Wing joiner not glued
properly will lead to wing failure and plane crash.
Left Wing
Ring
1.5mm
3x8x22mm
Plywood
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
Aileron Servo
4
Completed
Stabilizer &Elevator
5
P.4
Pre-glued
Completed
Bottom View
Pushrod 1.8x135mm
Ø
TWM PL8210010
CLEVIS WRENCH
Straper
Fuel Tube
6x5mm
•
•Ø
Ring
Clevis
A=A'
AA'
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
7
PA3 x 10mm Screw
4
3mm Set Screw
4
4.1mm Collar
4
V
Main Landing Gear
ertical Fin / Rudder
6
PM3 x 65mm Screw
2
2
d3 x D7mm Washer
Use thread locker when tightening
screw. Don't excessive force
as you are dealing with balsa.
use
Completed
P.5
PA3 x 10mm
Plate
Pre-glued
3mm Set Screw
4.1mm Collar 4.1mm Collar
2mm
B=B
BB
Washer
d3xD7mm
PM3x65mm
●Bottom View
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
T
Engine Mount
ail Landing Gear
PA3 X12mm Screw
2
PM2 x 12mm Screw
1
M2 Nut
1
2.1mm Collar
1
8
Bottom View
PA3 X12mm
d3 x D7mm Washer
M3 x 20mm Socket Head Screw
4
4
9
Blind nuts are off-centered to keep
the spinner at the fuselage axis.
Apply thread locker to screws.
P.6
Engine Mount
PL5111030
Socket Head Screw
M 3 x 20mm
M2 Nut
PM2 x 12mm
Completed
2.1mm Collar
3mm Set Screw
d3xD7mm
Washer
2mm
Aluminum Plate
1.5mm
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
10
S
Fuel Tank
Elevator Pushrod
ervo Set
11
12
Ø1mm pilot holes for World Models tri-horn are pre-drilled. Please look
for pin-hole marks at under side of control surfaces.
PB2 x 12mm Screw
3
P.7
40mm
40mm
195mm
195mm
Fuel Tube
6 x 5mmØ
Clevis
PB2
x
12mm
Pushrod Ø1.8 x 685mm
Tri-Horn
M3x14mm
Fuel Tank
260cc
3 X 3mm Set Screw
2mm Nut
Linkage Connector
1
1
1
2
2mm Washer
Throttle Pushwire
3x3mm Set Screw
Throttle Servo.
M2 Nut
Please refer to attached sheet for linkage connector installation.
2mm
Washer
2mm
2mm
Washer
TWM PL8210010
CLEVIS WRENCH
1 2
3
Completed
Cable Tie
1.5x5x400mm Double-sided Tape
40x100mm
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
195mm
195mm
40mm
40mm
P.8
Rudder Pushrod
13 Ø1mm pilot holes for World Models tri-horn
are pre-drilled. Please look for pin-hole
marks at side of control surfaces.
under
PB2 x 12mm Screw
3
Tri-Horn
M3x14mm
Fuel Tube
6 x 5mmØ
Clevis
PB2 x 12mm
Pushrod Ø1.8 x 685mm
d2xD5mm
Washer PM2x10mm
Screw
Aluminum Plate 1mm
Completed
109mm
4 3in.
Spinner
Ø52mm
14
M2 Nut
M2 Nut
Propeller
TWM PL8210010
CLEVIS WRENCH
Fuel Filler
PL8110030
3 mm.2
d3xD7mm
Washer
d3xD7mm
Washer
M3x25mm
PM2x10mm Screw
d2xD5mm Washer
d3xD7mm Washer
Screw
M3
Nut
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
P.9
d4 x D12mm Washer
2
2
d1.5 x D6.5mm Silicon Grommet
PWA2.3 X 8mm Screw
4
4
16
17
Bottom View
Apply double-sided tape
First insert the grommet to the canopy then apply screw.
d1.5 x D6.5mm
Silicon Grommet
PWA2.3 X 8mm
Washer
d4 x D12mm
1mm
R
Main Wing
Canopy
adio Equipment
Throttle Pushwire
Ø1.2 X 340mm
Fuel Tube
6 x 5mmØ
Straper
Install and arrange the servos as shown in the diagram.
Elevator
Pushrod
15
Straper
Fuel Tube
6 x 5mmØ
Plastic Tube
d2 x D3 x 240mm
Rudder
Pushrod
Elevator Servo
Throttle Servo Rudder Servo
Battery
Receiver Switch Harness
Charge Receptacles
KP0041300
d4xD12mm
Washer
Screw
HM4x30mm
HM4x30mm
HM4x30mm
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
Wing Setting
P.1 0
18
B
C
Adjust the wing and fuselage configuration as shown in the diagrams.
A=A B=B C=C
B'
C'
A
A
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
Adjust the control throws as shown in the
diagram. These throws are good for general
flying. You can adjust according to your
personal preference.
Control Throws
19
P.11
C.G.
20
The ideal C.G. position is 76mm (3 in) behind the leading
edge measured at where the wing meets the fuselage. In order
to obtain the C.G.specified, add weight to the fuselage or move
the battery position. Check the C.G. before flying.
Important Safety Precautions
# First time flyer should never fly by himself / herself. Assistance from experienced
flyer is absolutely necessary.
# Pre-flight adjustment must be done before flying, it is very dangerous to fly a badly
pre-adjusted aircraft.
# is specially designed to be powered by engine, using
a more powerful engine does not mean better performance. In fact, over powered
engine may cause severe damage and injuries.
# Make sure the air field is spacious, never fly the plane too close to people and never
get too close to a running propeller.
# If you find wrinkles on the covering as a result of weather changes, you can use hot
iron to remove the wrinkles. Please begin with lower temperature setting and
gradually raise the temperature until the wrinkles are gone. Too hot an iron may
damage the covering.
# Check and re-tighten up all factory assembled screws, use thread locker if necessary.
2C
Don't use hot iron near the seams or edges, hot iron will
melt the glue and shrink the covering at the same time, causing the seams to pull away.
0.40-0.46
Warning!
85mm
3.35in
76mm
C.G.
C.G.
3in
S K Y R A I D E R
M a c h I I
Elevator 15mm
15mm
Aileron
6mm
6mm
Rudder 20mm
20mm
http://www.theworldmodels.com/para/instruction/instructionManuals.php
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
LINKAGE CONNECTOR
HW7111050 & HW7111060
After fastening the round nut, make sure that
the linkage connector can rotate freely.
Drill 2mm hole at servo horn. Insert linkage connector
into servo horn.
Make sure shoulder of
screw is cleared from
servo horn.
Add washer to reduce
play if necessary.
Shoulder
Tighten up the round nut
against the shoulder. Apply
CA or permanent thread
locker.
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model, including
product news and free upgrade parts when applicable. Please fill in the following and send to
AirBorne Models, 4749-K, Bennett Drive, Livermore CA 94551 USA.
1. Name:
2. Address:
3. Phone #: E-mail:
4. Model:
Wing QC# Fuselage QC#
(QC numbers are stamped on wing and fuselage)
5. Date of Purchase:
6. Store Name:
Please call AirBorne Models at 925 371 0922 for any assistance in filling this form.
Thank you very much for purchasing our product.
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
Optional Parts
Clevis Wrench
Code No. Size Package
PL8210010 1 set
PL8210010
Small Clevis Large Clevis
Field Stand
Code No. Size Package
MS9111430 600 x 240 x 310mm 1 pc
( ACCESSORIES)
180mm Extension
Code No. Size Package
KW0011800 180mm 1 set
Fuel Filler
Code No. Size Package
PL8110030 15 x 22 x 49mm 1 x 1 pc
Charge Receptacles
Code No. Size Package
KP0041300
180mm Y-Cord
Code No. Size Package
KW0021800 180mm 1 pc
Speed : 0.17 sec / 60° @4.8V
0.14 sec / 60° @6.0V
Torque : 3.2kg.cm / 44.8 oz - in @4.8V
4.1kg.cm / 57.4 oz - in @6.0V
Size : 40.6 x 20 x 37mm /
1.60 x 0.79 x 1.46 in
Weight : 39.4 g / 1.39 oz
Code No SV4031
Special tool for clevis installation.
Suitable for standard and small
(EP) clevis.
Standard Servo
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.theworldmodels.com
A178NPO29981403
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w.t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
www.t h e w o r l d m o d e l s .co m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .com
The World Models
Manufacturing Co., Ltd.
w w w .t h e w o r l d m o d e l s .c o m
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

THE WORLD MODELS Sky Raider Mach II Instrukcja obsługi

THE WORLD MODELS
Marka
THE WORLD MODELS
Model
Sky Raider Mach II
Kategoria
Zabawki
Typ
Instrukcja obsługi
ściągnij PDF
raport

Powiązane dokumenty

Inne dokumenty