Yamaha SV250 Instrukcja obsługi

Marka: Yamaha

Model: SV250

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

SV255

WT66620

1412 R1 Printed in Japan

Thank you for purchasing the Yamaha SILENT Violin

. In order to

obtain the maximum performance and enjoyment from your SILENT

Violin

, we urge you to read this Owner’s Manual thoroughly before us-

ing the instrument. Please keep this Owner’s Manual in a safe place for

later reference.

SV250/255 Features

The SV250/SV255 SILENT Violin™ is a high quality electric violin designed

for stage and studio use.

Based on the same slim body design found in previous SILENT Violins™,

the SV250/255 incorporates a unique hollow structure in its body to deliver

enhanced acoustic tone and excellent playability.

The SV250/255 features a dual pickup design using one piezo-electric

pickup located underneath the bridge to reproduce the rich acoustic tone

produced by the overall instrument, and another newly developed piezo-

electric pickup built into the bridge to accurately reproduce subtle bowing

nuances. Output from the two pickups can be blended freely to create a wide

range of tone. The instrument’s electronics are housed in a sturdy aluminum

control box that can be placed on the floor or attached to the player’s

apparel with its integral belt clip. The unit supplies the violin’s preamp with

its needed electric power and incorporates an equalizer for shaping the tone

of the instrument’s audio signal. It also includes a headphone monitor amp

with independently adjustable volume and the unit can be powered from any

one of three power sources; two AA batteries, a power adaptor, or phantom

power.

In addition to a regular monaural line out, an XLR balanced output provides

a noise resistant balanced output signal for sending the instrument’s output

directly to a mixing console. The two outputs let you easily connect to an

effector/amp system and mixing console at the same time, or connect to a

DAW via an audio interface for recording.

Crafted with high quality woods, quality construction and finish, plus

electronics designed specically for the violin and diverse output options,

the SV250/255 goes beyond being a great instrument for practice to being

an instrument perfect for stage and recording use with its exceptional tone

quality and playability.

SV250/SV255

Owner’s Manual

English

02_SV250_en_R1.indd 1 14/12/16 16:30

SPECIAL MESSAGE SECTION

92-BP

This product utilizes batteries or an external power supply (adaptor). DO NOT

connect this product to any power supply or adaptor other than one described

in the manual, on the name plate, or speciﬁcally recommended by Yamaha.

This product should be used only with the components supplied or; a cart,

rack, or stand that is recommended by Yamaha. If a cart, etc., is used, please

observe all safety markings and instructions that accompany the accessory

product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained

in this manual is believed to be correct at the time of printing. However, Yama-

ha reserves the right to change or modify any of the speciﬁcations without

notice or obligation to update existing units.

Do not attempt to service this product beyond that described in the user-

maintenance instructions. All other servicing should be referred to qualiﬁed

service personnel.

This product, either alone or in combination with an ampliﬁer and headphones

or speaker/s, may be capable of producing sound levels that could cause

permanent hearing loss. DO NOT operate for long periods of time at a high

volume level or at a level that is uncomfortable. If you experience any hearing

loss or ringing in the ears, you should consult an audiologist.

IMPORTANT:

The louder the sound, the shorter the time period before dam-

age occurs.

NOTICE:

Service charges incurred due to a lack of knowledge relating to

how a function or effect works (when the unit is operating as designed) are

not covered by the manufacturer’s warranty, and are therefore the owner’s re-

sponsibility. Please study this manual carefully and consult your dealer before

requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are

both user safe and environmentally friendly. We sincerely believe that our

products and the production methods used to produce them meet these goals.

In keeping with both the letter and the spirit of the law, we want you to be

aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery

which (if applicable) is soldered in place. The average life span of this type

of battery is approximately ﬁve years. When replacement becomes necessary,

contact a qualiﬁed service representative to perform the replacement.

This product may also use “household” type batteries. Some of these may be

rechargeable. Make sure that the battery being charged is a rechargeable type

and that the charger is intended for the battery being charged.

When installing batteries, do not mix old batteries with new, or with batteries of

a different type. Batteries MUST be installed correctly. Mismatches or incorrect

installation may result in overheating and battery case rupture.

Warning:

Do not attempt to disassemble or incinerate any battery. Keep all

batteries away from children. Dispose of used batteries promptly and as regu-

lated by the laws in your area. Note: Check with any retailer of household type

batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or

for some reason its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of products that

contain lead, batteries, plastics, etc. If your dealer is unable to assist you, please

contact Yamaha directly.

NAMEPLATE LOCATION:

The nameplate is located on the bottom of the

product. The model number, serial number, power requirements, etc., are

located on this plate. You should record the model number, serial number, and

the date of purchase in the spaces provided below and retain this manual as a

permanent record of your purchase.

Model Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

FCC INFORMATION (U.S.A.)

tronic devices. Compliance with FCC regulations does not guarantee

that interference will not occur in all installations. If this product is

found to be the source of interference, which can be determined by

turning the unit “OFF” and “ON”, please try to eliminate the problem

by using one of the following measures:

Relocate either this product or the device that is being affected by the

interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line ﬁlter/s.

In the case of radio or TV interference, relocate/reorient the antenna.

If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to

co-axial type cable.

If these corrective measures do not produce satisfactory results, please

contact the local retailer authorized to distribute this type of product.

If you cannot locate the appropriate retailer, please contact Yamaha

Corporation of America, Electronic Service Division, 6600 Orangeth-

orpe Ave, Buena Park, CA 90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

1. IMPORTANT NOTICE: DO NOT MODIFY THIS

UNIT!

This product, when installed as indicated in the instructions contained

in this manual, meets FCC requirements. Modiﬁcations not expressly

approved by Yamaha may void your authority, granted by the FCC, to

use the product.

2. IMPORTANT

When connecting this product to accessories

and/or another product use only high-quality shielded cables. Cable/

s supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE:

This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reasonable

level of assurance that your use of this product in a residential envi-

ronment will not result in harmful interference with other electronic

devices. This equipment generates/uses radio frequencies and, if not

installed and used according to the instructions found in the user’s

manual, may cause interference harmful to the operation of other elec-

CANADA

THIS DIGITAL APPARATUS DOES NOT EXCEED THE “CLASS B” LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS

SET OUT IN THE RADIO INTERFERENCE REGULATION OF THE CANADIAN DEPARTMENT OF COMMUNICATIONS.

LE PRESENT APPAREIL NUMERIQUE N’EMET PAS DE BRUITS RADIOELECTRIQUES DEPASSANT LES LIMITES APPLICABLES AUX AP-

PAREILS NUMERIQUES DE LA “CLASSE B” PRESCRITES DANS LE REGLEMENT SUR LE BROUILLAGE RADIO ELECTRI QUE EDICTE PAR

LE MINISTERE DES COMMUNICATIONS DU CANADA.

• This applies only to products distributed by Yamaha Canada Music Ltd.

• Ceci ne s’applique qu’aux produits distribués par Yamaha Canada Musique Ltée.

02_SV250_en_R1.indd 2 14/12/16 16:30

Your SILENT Violin™ will give you years of reliable service if you follow the simple

rules given below:

Location

Do not expose it to the following conditions to avoid

deformation, discoloration, or more serious damage.

• Direct sunlight (e.g. near a window).

• High temperatures (e.g. near a heat source, outside,

or in a car during the daytime).

• Excessive humidity.

• Excessive dust.

• Strong vibration.

Power Supply

• Turn the power switch OFF when not in use.

• If you use an AC power adaptor, unplug the adaptor

from the AC outlet if not to be used for an extended

period of time.

• Unplug the AC power adaptor during electric storms.

• Avoid plugging the AC power adaptor into the

same AC outlet as appliances with high power

consumption, such as electric heaters or ovens.

Also avoid using multi-plug adaptors since these

can result in reduced sound quality and possibly

damage.

Turn Power OFF When Making Connections

• To avoid damage to the SILENT Violin™ and other

devices to which it is connected (a sound system,

for example), turn the power switches of all related

devices OFF prior to connecting or disconnecting

audio cables.

Handling and Transport

• Never apply excessive force to the controls,

connectors or other parts.

• Always unplug cables by gripping the plug ﬁrmly,

not by pulling on the cable.

• Disconnect all cables before moving the unit.

• Physical shocks caused by dropping, bumping,

or placing heavy objects on the unit can result in

scratches and more serious damage.

Cleaning

• Clean the cabinet and panel with a dry soft cloth.

• A slightly damp cloth may be used to remove

stubborn grime and dirt.

• Never use cleaners such as alcohol or thinner.

• Avoid placing vinyl objects on top of the unit (vinyl

can stick to and discolor the surface).

Electrical Interference

• This unit contains electric circuitry and may cause

interference if placed too close to radio or television

receivers. If this occurs, move it further away from

the affected equipment.

Yamaha is not responsible for damage

caused by improper handling or operation.

Information for Users on Collection and Disposal of Old Equipment and used Batteries

These symbols on the products, packaging, and/or accompanying documents mean that used

electrical and electronic products and batteries should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products and used batteries, please take them

to applicable collection points, in accordance with your national legislation and the Directives

2002/96/EC and 2006/66/EC.

By disposing of these products and batteries correctly, you will help to save valuable resources and

prevent any potential negative effects on human health and the environment which could otherwise

arise from inappropriate waste handling.

For more information about collection and recycling of old products and batteries, please contact

your local municipality, your waste disposal service or the point of sale where you purchased the

items.

[For business users in the European Union]

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for

further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please

contact your local authorities or dealer and ask for the correct method of disposal.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies with the

requirement set by the Directive for the chemical involved.

02_SV250_en_R1.indd 3 15/01/27 8:12

• Main Unit x 1

(The instrument ships from the factory with its bridge lying ﬂat.)

• Cable x 1

(Connects the instrument

to the Control Box.)

• Stereo earphones x 1

• Cable Band x 2

(Secures the cable to the

instrument body.)

• Control Box x 1

* Use an optional Yamaha Power Adaptor (see page 15) for powering the instrument

with a power adaptor.

* To play SV250/SV255, you will need 2 SUM-3 (AA) size batteries.

• Owner’s Manual

(this booklet)

x 1

[SV250]

[SV255]

Bridge Bridge

Main Body/Accessories

After opening the packaging, please check that all the parts listed below are

included.

02_SV250_en_R1.indd 4 14/12/16 16:30

Fingerboard

Neck

Chin rest

[Main Unit]

Tuning peg

Nut

5th string (C)

*SV255 only

Adjuster

Frame

Tailpiece

Body

Bridge seat

●

Front

●

Back

4th string (G)

2nd string (A)

1st string (E)

Bridge

Neck

Pickup Blend Control

(PICKUP BLEND)

Shoulder

Rest Holder

Control Box

Instrument Jack

3rd string (D)

The SV255 is used in the diagram.

Nomenclature

02_SV250_en_R1.indd 5 14/12/16 16:30

[Control Box]

* For use with the SV250/SV255. Not compatible with other instruments.

Belt Clip

Battery Indicator

Stereo Earphones

Main Unit

Cable

Cable Hook

Instrument Jack

Cable Hook

Phones Jack

Phones Volume

Line Out Volume Control

(VOLUME)

Treble Control

(TREBLE)

Bass Control

(BASS)

Balanced Out Pad Switch

(BALANCED OUT PAD

-26dB/OFF)

Ground Lift Switch

(GROUND LIFT GND/LIFT)

Power Adaptor Jack

(DC IN 12V

)

Power Adaptor

(Option)

Electric Outlet

Line Out Jack (Balanced)

(BALANCED OUT)

Line Out Jack (Unbalanced)

(LINE OUT)

Connect to a balanced input

(XLR connector) on a mixing

console, audio interface, or

similar external device.

Connect to the input (standard

¼” phone jack) on a powered

speaker, effector, or similar

external device.

02_SV250_en_R1.indd 6 14/12/16 16:30

[Explanation of Input/Output Section]

Control Box Instrument Jack

This jack is used to receive power from the Control Box

and transmit the audio signal from the instrument to the

Control Box. Use the supplied cable to connect the in-

strument to the “Instrument Jack” on the Control Box.

* A commercially available audio cable with stereo mini plugs

on both ends can also be used. (Cables with resistors are

not compatible.)

* The system will not operate properly if a monaural cable is

used.

* The system will not operate properly if the cable is attached

to anything other than the Control Box.

* Pass the cable end through the holes on the supplied cable band then attach to the shoulder rest

as shown in the diagram on the right to prevent accidental disconnecting of the cable.

• Disconnecting the cable while the power is ON may result in damage to the equipment. The

sudden shock to your ears may be severe, so please use caution.

• When connecting or disconnecting the cable, always make sure that the control box is not

connected to any external device, or that the power is switched OFF on the external device

before proceeding. The resulting loud sound may cause hearing loss and damage external

equipment.

• When connecting or disconnecting the cable, always make sure there are no inner ear-

phones or headphones, etc., connected. The loud sound may cause hearing loss and dam-

age the inner earphones or headphones.

Instrument Jack (

)

This jack supplies power to the SV250/SV255 instru-

ment and receives the audio signal from the SV250/

SV255. Use the supplied cable to connect the instru-

ment to the “Instrument Jack” on the Control Box.

* The control box’s main power is switched ON when a cable

is connected to this jack.

* Hooking the cable onto the cable hook positioned furthest

away from the instrument jack prevents accidental discon-

nection of the cable.

• Always disconnect the cable when the instrument is not in use. The instrument continu-

ously consumes electric power when the cable is connected.

• When connecting or disconnecting the cable, always make sure that the control box is not

connected to any external device, or that the power is switched OFF on the external device

before proceeding. The resulting loud sound may cause hearing loss and damage external

equipment.

• When connecting or disconnecting the cable, always make sure there are no inner ear-

phones or headphones, etc., connected. The loud sound may cause hearing loss and dam-

age the inner earphones or headphones.

• Never connect any devices (including other SILENT Violins™ with different model num-

bers) other than the SV250/SV255 SILENT Violin™ that is included in the bundled set.

Doing so may result in damage to the other device.

Cable Band

Cable

Shoulder Rest Holder

Cable Hook

Cable

Caution

02_SV250_en_R1.indd 7 14/12/16 16:30

Caution

Phones Jack (

)

For connecting the supplied inner earphones.

* The headphone amp’s power is switched ON when a pair of stereo inner earphones is connected

to this jack.

* The volume level for the stereo inner earphones can be adjusted with the

PHONES VOLUME

control adjacent to the PHONES jack. Since the

PHONES VOLUME is not linked to the MAIN

VOLUME control, its level can be adjusted independently of the LINE OUT.

* Any commercially available headphones or inner earphones can be used.

• Always disconnect the headphones or inner earphones from the jack when the instrument

is not being used. The device continuously consumes power when a cable is connected to

the jack. Also, switching the power on when nothing is connected to this jack deactivates

the headphone amp decreasing power consumption to increase battery life.

• Never disconnect the headphones or inner earphones while the headphones or inner ear-

phones are still in your ears. The resulting loud sound may cause hearing loss.

• Do not listen for extended periods of time at loud volume levels using the inner earphones

or headphones. Doing so can result in damage to your hearing.

Line Out Jack (Unbalanced) (LINE OUT)

The line out jack is compatible with a standard ¼” phone

plug. The signal is delivered from this output after being

adjusted with the volume, treble, and bass controls.

Line Out Jack (Balanced) (BALANCED OUT)

The balanced output jack is compatible with an XLR

connector. This jack delivers a balanced signal that is

the same as the LINE OUT jack (adjusted with volume,

treble, and bass controls).

The signal can be attenuated by 26dB using the BAL-

ANCED OUT PAD switch on the side of the control box.

• Make sure that the power is switched OFF or all volume levels are set to “0” on all external

equipment before connecting external equipment to the Line Out Jack (Unbalanced, Bal-

anced). Loud volume levels can damage your hearing, and damage equipment.

• When making connections to external devices, make sure that the proper plugs are used

and securely connected.

• If the sound is distorted, use the volume control on the instrument or on the Control Box

and lower the volume until the sound is no longer distorted.

02_SV250_en_R1.indd 8 14/12/16 16:30

[Control Section Details]

Pickup Blend Control (PICKUP BLEND)

Controls the volume balance between the two built-in pickups.

The line out jack is compatible with a standard ¼” phone plug.

Rotate the knob fully to the right [BODY] to produce the signal

from the pickup underneath the bridge, which reproduces the rich

tone produced by the instrument’s body. Rotate the knob fully to the left [BRIDGE] to produce

the signal from the pickup in the bridge, which reproduces bow articulation and quicker re-

sponse. Set the dial to its center position to produce a balanced output of the two pickups.

* The volume control is not located on the instrument itself, use the volume control on the control

box to adjust the volume.

Line Out Volume Control (VOLUME)

Adjusts the volume level of the signal delivered from

the LINE OUT and BALANCED OUT jacks. (It does

not effect the volume of the Phones jack.)

Treble Control (TREBLE)

Adjusts the treble or high range frequencies. (Effects

all output)

Bass Control (BASS)

Adjusts the bass or low range frequencies. (Effects

all output)

Phones Volume (see diagram on page 7)

Adjusts the volume level of the Phones jack signal. (This volume can be set regardless of

the main volume control setting.)

* If the electric output sound is distorted, lower the VOLUME and other such controls to a suitable level.

Ground Lift Switch (GROUND LIFT GND/LIFT)

Separates the ground between the instrument and external device when connecting the in-

strument to an external device via the BALANCED OUT XLR connector. The [GND] setting

is used under normal circumstances. If you experience noise due to a ground loop, move

the switch to the [LIFT] position to separate the ground between the instrument and exter-

nal device. This is one method that can be used to suppress noise.

* When the switch is set to the [LIFT] position, the instrument will not operate with phantom power

(Refer to page 11). Use batteries or a power adaptor.

Balanced Out Pad Switch (BALANCED OUT PAD -26dB/OFF)

Attenuates the signal from the BALANCED OUT jack by 26dB.

Setting this switch to the [-26dB] position when connecting the instrument to a small mix-

ing console or other device that only has balanced XLR mic level inputs makes its output

compatible with a mic level input.

To connect the instrument to a line level balanced input on an external device, set the switch

to the [OFF] position to send the same level signal as that of the unbalanced LINE OUT.

Boost

Cut

02_SV250_en_R1.indd 9 14/12/16 16:30

Open the battery compartment cover on the

backside of the control box.

Insert the two batteries (SUM-3 (AA) size).

Take careful note of the polarity markings as

shown in the illustration above, and insert the

batteries.

Replace the battery compartment cover.

SUM-3 (AA)

size battery x2

Battery compartment cover

About the Battery Warning Indicator (LED)

The Battery Warning Indicator located to the right of the instru-

ment jack on the control box, is usually off during normal op-

eration however, it will change from blinking to continuously lit

as battery power depletes. When the indicator starts blinking,

follow the cautions below and change the batteries as soon as

possible.

• Always follow the +/– signs when inserting the batteries. Improper insertion may result in ﬁre.

• Always replace worn batteries with a complete set of new batteries. Never mix new and old batteries.

Do not mix different types of batteries (alkaline and manganese, or batteries from different manufac-

turers, or different types by the same manufacturer). Doing so may result in ﬁre.

• To prevent possible damage to the unit due to battery leakage and unnecessary power drain, remove

the batteries from the unit when it is not going to be used for an extended period of time.

The warning indicator blinks once when connecting a cable to the jack if the batteries have an ad-

equate charge or the power adaptor is operating properly. (When operating on phantom power alone,

the light will not ﬂash when connecting a cable due to the control box design.)

Using Batteries

Battery Indicator

Power Supply

The SV250/255 can operate on power supplied from three different power

sources; battery power, AC power, or phantom power supplied by an external

source via the XLR cable. Always make sure that the power is switched OFF

on the external audio device, or its volume is set to “0” before switching the in-

strument’s power ON.

Bij dit produkt zijn batterijen geleverd.

Wanneer deze leeg zijn, moet u ze niet

weggooien maar inleveren als KCA.

* For customers in the Netherlands

02_SV250_en_R1.indd 10 14/12/16 16:30

Supplying AC Power

AC adaptor is optional, please purchase the optional

power adaptor (Refer to page 15).

Securely connect the power adaptor’s DC connector to the DC

IN jack on the side of the Control Box.

Plug the AC adaptor into a convenient wall AC power socket.

When Using Phantom Power

Use an XLR cable to connect the balanced out jack on the

instrument to a mixer or other external audio device that can

supply phantom power (48V).

Switch on the phantom power on the external device.

* Due to the supply limitations of phantom power, there is

not enough power to drive the headphone amp, so only the

amp for the line out jack and balanced out jack is opera-

tional regardless of whether a pair of inner earphones is

connected to the PHONES jack or not. (There is no output

from the PHONES jack.)

* When the instrument is powered using both phantom power

and the power adaptor, the headphone ampliﬁer will oper-

ate since power supply priority is given to the power adap-

tor.

* The priority given to power use is power adaptor

phan-

tom power

battery power, power is not drawn from the

battery when the power adaptor or phantom power is used.

AC power

socket

Power

Adaptor

XLR Cable

To an external device

capable of supplying

phantom power.

02_SV250_en_R1.indd 11 14/12/16 16:30

Caution

Tuning and Changing the Strings

Because the bridge includes a built in sensor,

which is connected to the body with a thin cable,

the instrument ships from the factory with the

bridge laying down. First, set up the bridge and

then proceed with tuning. As the strings get old,

sound quality will gradually decrease, and it will

become difﬁcult to tune the instrument. Change

the strings as soon as you think they are getting

old.

• The end of the strings are sharp and can

cut ﬁngers. Use caution when changing

strings.

• When changing or adjusting strings, do

not put your face close to the instrument.

The string may suddenly break resulting

in eye or other unexpected injuries.

• The lower side of the bridge supports the 1st string (E),

the higher side supports the 4th string (G)/5th string

(C). Make sure the bridge is placed properly, then set

the bridge in the bridge seat.

• Ensure that the bridge stands vertically. If it leans to

one side, use both hands to adjust. Make sure that

each string passes over the corresponding slits in the

bridge.

Correct

Bridge seat

Tailpiece

Body

Bad

Vertical

Bridge seat

Bridge feet

[Make sure the bridge feet do not

come in contact with the bridge seat]

1st string

4th string

5th string

[Looking from the tailpiece]

Groove

[Bridge is placed vertically]

SV250

SV255

Set up

02_SV250_en_R1.indd 12 14/12/16 16:30

• String tunings are, 1st string E, 2nd string A, 3rd

string D, 4th string G, 5th string C (SV255 only).

Push in on the tuning peg and rotate to tune. Use a

piano, tuning fork, or tuner to tune the instrument.

• Finally, use the adjuster to ﬁne tune the strings.

• When the instrument is not going to be used for an extended period of time, loosen the strings until

the pitch drops a whole tone.

• Before using the instrument, make sure that the bridge is positioned vertically. Damage to the bridge

and poor sound quality may result if the bridge is not properly positioned.

Don’t loosen

too much.

[Bridge is placed vertically]

[Make sure that the strings do not

come out of their grooves]

Protective tube on

the 1st (E) string

1st string (E)

4th string (G)

2nd string (A)

3rd string (D)

SV255

5th string (C)

Caution

Make sure that the strings are rest-

ing in their appropriate grooves in the

bridge when playing the instrument.

Strings may come out of their grooves when adjusting the

bridge or changing strings. Since the 1st (E) and 4th (G)/5th

your ﬁngers to hold the strings gently in place when tuning

the instrument.

Also, the 1st (E) string is ﬁtted with a protective tube. Make

sure that the tube rests on the bridge.

Always make sure that the bridge is standing ver-

tically, whether the instrument is being played or

stored. (see diagram on page 12)

Even if the bridge is standing vertically before tuning, it

may tilt during the tuning process. If so, readjust the bridge

so it stands vertically.

It is very important that the bridge stands vertically. If it

leans in either direction it will impair the sound and risk

damaging the instrument.

If the adjuster is too loose, it could pro-

duce noise while playing.

Caution

02_SV250_en_R1.indd 13 14/12/16 16:30

●

Winding the Strings

(Please refer to this section when changing the strings)

Before you string the instrument, set the adjuster so that it is in

the middle of its adjustment range. (All adjusters)

Place the ball (on the end of the string) in the notch on the adjust-

er. Make sure the ball is properly inserted in the adjuster’s notch.

After threading the string through the hole in

the tuning peg, turn the tuning peg making one

wrap on one side of the hole and the remaining

wraps on the other side as shown in the diagram

on the right.

Adjuster’s notch

String

Ball

The adjuster

should be set to

the middle of its

adjustment range.

Winding the 1st and

2nd strings

Remaining

winds

1st

wind

Winding the 3rd,

4th and 5th strings

1st

wind

Remaining

winds

Shoulder rest

The Shoulder Rest

A commercially available violin shoulder rest (4/4

size) can be attached to the instrument.

* Some shoulder rests are incompatible (air cushion

type, etc.).

1st string (E)

4th string (G)

2nd string (A)

3rd string (D)

SV250

1st string (E)

4th string (G)

2nd string (A)

3rd string (D)

SV255

5th string (C)

02_SV250_en_R1.indd 14 14/12/16 16:30

Speciﬁcations

Instrument

Neck

Maple

Body

Spruce/Maple

Fingerboard/Tuning Pegs

Ebony

Bridge

Maple (Built-in Sensor Type)

Frame

Synthetic Resin

Tailpiece

SV250

: Adjuster : 4 pieces (Wittner)

SV255

: Adjuster : 5 pieces (Wittner)

Strings

Ball-end type violin strings (Zyex)

* Helicore on the 5-string SV255 only

Sensor

Piezo pick-up (underneath the bridge),

Bridge w/ Built-in Piezo-electric Pickup

Power

Supplied via the Control Box connection

String Length

328 mm (12-15/16”)

Dimensions

SV250

: 591 (L) x 206 (W) x 117 (H) mm

23-1/4” (L) x 8-1/8” (W) x 4-5/8” (H)

SV255

: 600 (L) x 206 (W) x 122 (H) mm

23-5/8” (L) x 8-1/8” (W) x 4-13/16” (H)

Weight (instrument only)

SV250

: approximately 500 g (1 lbs. 2 oz.)

SV255

: approximately 540 g (1 lbs. 3 oz.)

Control

Pickup Blend

Control Box

Case

Aluminum Alloy

Controls

• Line Out Volume

• Treble Control

• Bass Control

• Phones Volume

• Ground Lift Switch

• Balanced Out Pad Switch

Connections

• Instrument Jack (Input/Output with Built-in Power Switch)

•

Phones Jack (Output, PHONES with Built-in Amp Power Switch)

• Line Out Jack (LINE OUT) (6.3mm Unbalanced Output)

• Line Out Jack (BALANCED OUT) (XLR Balanced Output)

• Power Adaptor Jack (DCIN12V)

Power

• Batteries: SUM-3 (AA) size battery x2

• Power Adaptor (sold separately): Yamaha PA3C (for use in

Japan), PA130 (for use internationally), DC 12 V/700 mA

• Phantom Power

28-48V

Power Consumption

2.6 W (with the PA3C), 1.1 W (with the PA130, PA130A),

1.2 W (with the PA130B)

Battery Life (Continuous Use)

Using Manganese batteries :

When Using Earphones: approx. 15 hours, Without: approx. 45 hours

Using Alkaline batteries :

When Using Earphones: approx. 50 hours, Without: approx. 120 hours

Dimensions

142 (L) x 72 (W) x 49 (H) mm

(excluding the buttons)

5-9/16” (L) x 2-13/16” (W) x 1-15/16” (H)

Weight

approximately 260 g (9 oz.) (without supplied batteries)

Accessories

Cable, Stereo earphones, Owner’s Manual (this booklet)

* Design and speciﬁcations are subject to change without notice.

02_SV250_en_R1.indd 15 15/01/06 9:31

WT66620

1502 R1 Printed in Japan

Yamaha SV250 Instrukcja obsługi

Marka: Yamaha

Model: SV250

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

SV255

ściągnij PDF

raport

w innych językach

čeština: Yamaha SV250 Návod k obsluze
español: Yamaha SV250 El manual del propietario
italiano: Yamaha SV250 Manuale del proprietario
Deutsch: Yamaha SV250 Bedienungsanleitung
svenska: Yamaha SV250 Bruksanvisning
português: Yamaha SV250 Manual do proprietário
français: Yamaha SV250 Le manuel du propriétaire
Türkçe: Yamaha SV250 El kitabı
English: Yamaha SV250 Owner's manual
dansk: Yamaha SV250 Brugervejledning
русский: Yamaha SV250 Инструкция по применению
suomi: Yamaha SV250 Omistajan opas
Nederlands: Yamaha SV250 de handleiding
română: Yamaha SV250 Manualul proprietarului

Yamaha SV250 Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Yamaha SV250 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty