Yamaha PR7 Instrukcja obsługi
- Kategoria
- Dyktafony
- Typ
- Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
Manuale di istruzioni
Руководство пользователя
Փ⫼䇈ᯢкՓ⫼䇈ᯢк
JA
ZH
RU
IT
ES
FR
DE
EN
RECORDER
Owner’s Manual
2
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interfer-
ence, and (2) this device must accept any
interference received, including interference
that may cause undesired operation.
FCC INFORMATION (U.S.A.)
1. IMPORTANT NOTICE: DO NOT MOD-
IFY THIS UNIT!
This product, when installed as indicated in
the instructions contained in this manual,
meets FCC requirements. Modifications not
expressly approved by Yamaha may void
your authority, granted by the FCC, to use
the product.
2. IMPORTANT: When connecting this prod-
uct to accessories and/or another product
use only high quality shielded cables. Cable/
s supplied with this product MUST be used.
Follow all installation instructions. Failure to
follow instructions could void your FCC
authorization to use this product in the USA.
3. NOTE: This product has been tested and
found to comply with the requirements listed
in FCC Regulations, Part 15 for Class “B”
digital devices. Compliance with these
requirements provides a reasonable level of
assurance that your use of this product in a
residential environment will not result in
harmful interference with other electronic
devices. This equipment generates/uses
radio frequencies and, if not installed and
used according to the instructions found in
the users manual, may cause interference
harmful to the operation of other electronic
devices. Compliance with FCC regulations
does not guarantee that interference will not
occur in all installations. If this product is
found to be the source of interference, which
can be determined by turning the unit “OFF”
and “ON”, please try to eliminate the prob-
lem by using one of the following measures:
Relocate either this product or the device
that is being affected by the interference.
Utilize power outlets that are on different
branch (circuit breaker or fuse) circuits or
install AC line filter/s.
In the case of radio or TV interference, relo-
cate/reorient the antenna. If the antenna
lead-in is 300 ohm ribbon lead, change the
lead-in to co-axial type cable.
If these corrective measures do not produce
satisfactory results, please contact the local
retailer authorized to distribute this type of
product. If you can not locate the appropriate
retailer, please contact Yamaha Corporation
of America, Electronic Service Division,
6600 Orangethorpe Ave, Buena Park,
CA90620
The above statements apply ONLY to those
products distributed by Yamaha Corporation
of America or its subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
CAN ICES-3(B)/NMB-3(B)
• This applies only to products distributed by
Yamaha Canada Music Ltd.
• Ceci ne s’applique qu’aux produits distribués
par Yamaha Canada Musique Ltée.
(class B)
Entsorgung leerer Batterien (nur innerhalb Deutschlands)
Leisten Sie einen Beitrag zum Umweltschutz. Verbrauchte Batterien oder Akkumulatoren dürfen nicht
in den Hausmüll. Sie können bei einer Sammelstelle für Altbatterien bzw. Sondermüll abgegeben
werden. Informieren Sie sich bei Ihrer Kommune.
(battery)
Owner’s Manual
3
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : RECORDER
Model Name : POCKETRAK PR7
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that may cause undesired
operation.
See user manual instructions if interference to radio reception is suspected.
(FCC DoC)
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA.
IMPORTANT
Please record the serial number of this unit in the space below.
Model
Serial No.
The serial number is located inside the battery compartment of the unit.
Retain this Owner’s Manual in a safe place for future reference.
(Ser.No)
About MP3
• Supply of this product does not convey a license nor imply any right to distribute content created with
this product in revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribu-
tion channels), streaming applications (via Internet, intranets and/or other networks), other content
distribution systems (pay-audio or audio-on-demand applications and the like) or on physical media
(compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like).
An independent license for such use is required. For details, please visit http://mp3licensing.com.
• MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
(class b korea)
4
Owner’s Manual
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep this manual in a safe place for future reference.
These precautions include, but are not limited to, the following:
DANGER
Handling caution
• Do not operate the device or use headphones/earphones while
driving a car or riding a motorcycle or a bicycle, since this could
result in a serious accident.
WARNING
Do not open
• Do not open the device or attempt to disassemble the internal
parts or modify them in any way. The device contains no user-
serviceable parts. If it should appear to be malfunctioning,
discontinue use immediately and have it inspected by qualified
Yamaha service personnel.
Water warning
• Do not expose the device to rain, use it near water or in damp or
wet conditions, or place containers near it containing liquids
which might spill into any openings. If any liquid such as water
seeps into the device, turn off the power immediately and unplug
the power cord from the AC outlet. Then have the device
inspected by qualified Yamaha service personnel.
If you notice any abnormality
• If this device should be dropped or damaged, immediately turn
off the power and have the device inspected by qualified Yamaha
service personnel.
CAUTION
Location
• Do not expose the device to excessive dust or vibrations, or
extreme cold or heat (such as in direct sunlight, near a heater, or
in a car during the day) to prevent the possibility of panel
disfiguration or damage to the internal components.
• Do not place the device in an unstable position where it might
accidentally fall over.
Handling caution
• Do not use the device or headphones/earphones for a long
period of time at a high or uncomfortable volume level, since
this can cause permanent hearing loss. If you experience any
hearing loss or ringing in the ears, consult a physician.
• Do not rest your weight on the device or place heavy objects on
it, and avoid use excessive force on the buttons, switches or
connectors.
DANGER
Make sure to always observe the basic precautions listed below to prevent the likelihood of serious
injury or even death from electrical shock, short-circuiting, damage, fire or other hazards.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death
from electrical shock, short-circuiting, damages, fire or other hazards.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or
others, or damage to the device or other property.
About the Device
(5)-6 1/3
5
Owner’s Manual
DANGER
• If you notice battery leakage, discoloration,
deformation, or any strange smell, immediately
remove the battery from the device and stop operating,
and also keep away from fire.
If you continue operating the device, it could cause battery fire,
explosion, electrolyte blowout, or smoke. If a leaking battery is
close to a source of flame, the battery electrolyte could catch fire,
resulting in battery fire, explosion, electrolyte blowout, or smoke.
WARNING
• Do not leave the battery installed for an extended time.
If the battery runs out, or if the device is not to be used for a long
time (about one week), remove the battery from the device and
keep it in a dry and cool place to prevent possible leakage of the
battery fluid.
• Do not deform, disassemble, or modify the battery.
Any modifications such as deformation, disassembly, or
soldering directly to the battery terminals may cause ignition,
explosion, and leakage or ejection of the electrolyte.
• Do not allow a wire to connect the positive and
negative terminals, and do not carry or store the
battery together with metallic objects such as a
necklaces or hairpins.
Doing so may short-circuit the battery, causing excessive
current to flow, and possibly resulting in ignition, explosion, and
leakage or ejection of the electrolyte. This may also cause the
wire or necklace to heat up.
• Do not throw the battery into a fire, heat it, or expose it
to the sunlight for a long time.
Doing so may melt the insulation, impair the safety mechanism,
or ignite the electrolyte, causing ignition or explosion.
• Do not peel off or damage the external covering.
Peeling off the external covering, piercing it with a nail or sharp
object, striking it with a hammer, or stepping on it may cause a
short-circuit within the battery, causing ignition, explosion,
leakage or ejection of the electrolyte, or overheating.
• Insert the battery as instructed.
Always make sure the battery is inserted in conformity with the
+/- polarity markings. Failure to do so might cause abnormal
electric current flow in the battery, resulting in fire, explosion,
leakage or ejection of the electrolyte, or overheating in use.
• Be sure to use the specified battery.
Do not replace the battery with any battery other than the one
specified (the same type or equivalent). Otherwise, the battery
may ignite or explode, the battery liquid may spout or leak, or
the unit may heat up.
• Do not leave the battery within reach of children.
A child may swallow the battery accidentally. Also, leaking battery
liquid may cause chemical reaction or inflammation. If a child
swallows the battery accidentally, consult a doctor immediately.
• An exhausted battery should be immediately removed
from the device.
If an exhausted battery is left connected to the device for an
extended period of time, gas generated by the battery may cause
the battery to leak, overheat, burst, or damage this device.
• When storing or discarding batteries, insulate the
terminal area by applying tape, or some other protection.
Mixing them with other batteries or metal objects can cause
electrolyte leakage, overheating, or battery fluid leakage.
NOTICE
To avoid the possibility of malfunction/ damage to the product,
damage to data, or damage to other property, follow the notices below.
Handling and Maintenance
• Do not use the device in the vicinity of a TV, radio, stereo
equipment, mobile phone, or other electric devices. Otherwise,
the device, TV, or radio may generate noise.
• Do not expose the device to excessive dust or vibration, or
extreme cold or heat (such as in direct sunlight, near a heater, or
in a car during the day), in order to prevent the possibility of
panel disfiguration, unstable operation, or damage to the
internal components.
• Do not place vinyl, plastic or rubber objects on the device, since
this might discolor the panel.
• When cleaning the device, use a dry and soft cloth. Do not use
paint thinners, solvents, cleaning fluids, or chemical-
impregnated wiping cloths.
• Condensation can occur in the device due to rapid, drastic changes
in ambient temperature—when the device is moved from one
location to another, or air conditioning is turned on or off, for
example. Using the device while condensation is present can
cause damage. If there is reason to believe that condensation might
have occurred, leave the device for several hours without turning
on the power until the condensation has completely dried out.
• Always turn the power off when the device is not in use.
Saving data
• Saved data may be lost due to malfunction or incorrect operation.
To protect against data loss, we recommended that you save
important data to an external device such as a computer.
About the Battery
(5)-6 2/3
6
Owner’s Manual
Before using the microSD card
• If you insert the microSD card in the wrong orientation or upside
down, the microSD card and/or the card slot may be damaged.
• If the recorder does not recognize the installed microSD card
when the power to the unit is turned on, first turn off the power,
remove the card, insert the card correctly, then turn the power
on.
• Do not install or remove the microSD card while the power to the
unit is on. Otherwise, the data on the microSD card may be
damaged.
• Do not touch the terminal on the microSD card or expose the
card to water or dirt.
• Do not try to bend, fold or place a heavy object on the microSD
card.
• Do not use or keep the microSD card in a location subject to
static electricity or electric noise.
• Do not place the microSD card in the vicinity of corrosive
chemicals or corrosive gas. Otherwise, the card may malfunction
or data on the card may be lost.
• Never place the microSD card within reach of small children. A
child may swallow the card accidentally.
• If you discard the microSD card without precautions, important
or personal data that remains on the card may become
accessible to unauthorized individuals. To avoid this risk, erase
all data on the card, destroy the card physically, then discard it.
Information
About copyrights
• Copying of the commercially available musical data including
but not limited to MIDI data and/or audio data is strictly
prohibited except for your personal use.
About this manual
• The illustrations and LCD screens as shown in this manual are
for instructional purposes only, and may appear somewhat
different from those on your device.
• Windows is a registered trademark of Microsoft(R) Corporation
in the United States and other countries.
• Apple, Mac and Macintosh are trademarks of Apple Inc.,
registered in the U.S. and other countries.
• The microSD and microSDHC logos are trademarks.
• The company names and product names in this manual are the
trademarks or registered trademarks of their respective
companies.
Based on EN 50332-2:2003
Maximumoutput voltage (earphone output): ≤150mV
Information for Users on Collection and Disposal of
Old Equipment and used Batteries
These symbols on the products, packaging, and/
or accompanying documents mean that used
electrical and electronic products and batteries
should not be mixed with general household
waste.
For proper treatment, recovery and recycling of
old products and used batteries, please take them
to applicable collection points, in accordance with
your national legislation and the Directives 2002/
96/EC and 2006/66/EC.
By disposing of these products and batteries
correctly, you will help to save valuable resources
and prevent any potential negative effects on
human health and the environment which could
otherwise arise from inappropriate waste
handling.
For more information about collection and
recycling of old products and batteries, please
contact your local municipality, your waste disposal service or
the point of sale where you purchased the items.
[For business users in the European Union]
If you wish to discard electrical and electronic equipment,
please contact your dealer or supplier for further information.
[Information on Disposal in other Countries outside the
European Union]
These symbols are only valid in the European Union. If you
wish to discard these items, please contact your local
authorities or dealer and ask for the correct method of
disposal.
Note for the battery symbol (bottom two symbol
examples):
This symbol might be used in combination with a chemical
symbol. In this case it complies with the requirement set by the
Directive for the chemical involved.
(5)-6 3/3
Table of contents
Owner’s Manual
7
Table of contents
Introduction .................................................... 7
Accessories ...................................................... 7
Downloading software .................................... 8
About Manuals ................................................8
Part names and functions ................................ 9
Inserting a battery and a microSD card
(sold separately) ........................................10
Power on/off ................................................. 10
Setting the date and time .............................. 10
Understanding the information on the LCD
screen ....................................................... 11
HOME screen ................................................11
Disabling all control buttons.......................... 11
Recording/Playback .......................................12
Changing the recording format (sound
quality)...................................................... 13
Specifying the recording destination..............14
Reducing noise .............................................. 16
Selecting a recording preset .......................... 17
Overdubbing (Layered recordings) ................ 17
Adding or deleting a marker.......................... 18
Repeat playback ............................................18
Adjusting the playback speed ........................ 19
Tuner............................................................. 19
Metronome ...................................................20
Deleting a file ................................................21
Dividing a file ................................................22
Copying a file ................................................22
Moving a file .................................................23
File naming rules for dividing, deleting or
moving a file ............................................. 24
Connecting the PR7 to a computer................24
System settings.............................................. 25
Troubleshooting ............................................27
Error messages ..............................................28
Main specifications ........................................29
Introduction
Thank you for purchasing the Yamaha
POCKETRAK PR7 recorder.
The PR7 is well-suited for numerous musical
applications.
The PR7 boasts user-friendly operation of
useful functions, such as overdubbing,
repeat playback and playback speed adjust-
ment, as well as normal recording and play-
back, of course.
To take the best advantage of the PR7’s out-
standing features for the longest period of
time, please read this Owner’s Manual before
you start using the PR7.
After reading this manual, please keep it for
future reference.
Accessories
• AAA-size alkaline battery x1
• USB cable x1
• Owner’s Manual (this book) x1
• Software download license code x1
(listed on the back cover of this book)
Downloading software
Owner’s Manual
8
Downloading software
Your PR7 comes with an access code that
enables you to download “WaveLab LE”
wave editor software for editing audio files.
Once you download and install such soft-
ware on an Internet-connected computer,
you will be able to edit audio data that was
recorded on the PR7.
For more information on downloading this
software, refer to the Yamaha Pro Audio
website:
http://www.yamahaproaudio.com/pr7/
About Manuals
Owner’s Manual (this book)
The Owner’s Manual includes information
primarily about basic operation.
Reference Manual (saved in the PR7 built-
in memory)
The Reference Manual includes detailed
information about operation and parameter
setup. This file is in PDF format for viewing a
computer. Copy this file to your computer to
read this manual using Adobe
®
Reader
®
. You
can also use the convenient features of such
electronic files that enable you to search for
terminology or jump to a linked page.
Download the latest version of Adobe Reader
from the following website:
http://www.adobe.com/
Copying the Reference Manual
The Reference Manual is stored in the
MANUAL folder in the built-in memory.
Follow the steps below to copy the manual
to your computer:
1. Use the supplied USB cable to connect
the PR7 to your computer.
2. After the PR7 is recognized as a USB
device on the computer, double-click
“PR7” to open the MANUAL folder.
The Reference Manual file is called
“PR7_RM_EN.pdf”.
3. Drag and drop the file onto the desk-
top.
4. Open the file in Adobe Reader.
Refer to page 24 for more information on
connecting the PR7 to a computer.
NOTE
• If you deleted the MANUAL folder or the Refer-
ence Manual in the built-in memory by accident,
format (initialize) the memory to automatically re-
create the MANUAL folder.
• You can download the Reference Manual from the
following Yamaha Pro Audio web site:
http://www.yamahaproaudio.com/pr7/
Part names and functions
Owner’s Manual
9
Part names and functions
1 Built-in microphones
2 REC LED
3 LCD screen
4 [OVERDUB] button
5 [MARK] button
6 [MENU] button
(Press and hold down this button to display
the Folder screen.)
7 [●] (Record) button
8 [■] (Stop) button
(Power on/Power off by pressing and holding
down this button)
9 [REC LEVEL] button
0 [+]/[–] buttons
A [<]/[>] buttons
B [ ] (Play) button
C [REC SET] button
(Press and hold down this button to display
the Preset screen.)
D PHONES jack
E MIC/LINE IN (external input) jack
F [HOLD] switch
G USB terminal
H Battery compartment
I microSD card slot
J Threaded socket for tripod
K Speaker
3
4
5
B
6
A
2
1
D
E
8
7
9
C
F
G
H
I
0
J
K
Inserting a battery and a microSD card (sold separately)
Owner’s Manual
10
Inserting a battery and a
microSD card
(sold separately)
1. Open the battery compartment cover.
2. Insert a microSD card.
3. Insert a battery. (AAA alkaline battery
cell or AAA NiMH battery x1)
4. Close the cover.
Power on/off
Power on
Press the [■] (Stop) button.
Power off
Press and hold down the [■] (Stop)
button for at least 3 (three) seconds while
the PR7 is stopped.
NOTE
When no operation has been performed on the
device for a certain length of time, the device turns
off automatically.
Setting the date and time
Setting the calendar when you
power on the unit for the first time
1. Use the [+] and [–] buttons to specify
the year, then press the [ ] (Play)
button.
2. In the same way, specify the month,
date, hour, and minute values.
To return to the previous
parameter, press the [<]
button.
To advance to the next
parameter, press the [>]
button.
Understanding the information on the LCD screen
Owner’s Manual
11
3. After you complete the set-
tings, press the [■] (Stop)
button.
The PR7 displays the HOME
screen.
NOTE
You can change this setting in the system setting
menu. ➔ page 25
Understanding the infor-
mation on the LCD screen
1 Remaining battery power
2 Menu items
3 Play/Record/Repeat indicators
4 Meter
5 Playback/Recording time, Remain-
ing time
6 Folder/File number
7 Recording settings
8 Current mode
HOME screen
You can select one of four possible
HOME screens using the [■]
(Stop) button.
Disabling all control buttons
Slide the [HOLD]
switch upward.
NOTE
• You can use the [HOLD]
switch even during
recording or playback.
• If you turn on the Hold
function while the unit is
stopped, it will display
the date and time.
637
2
1
8
4
5
kbps
REMAIN
Option 1 Option 2
Option 3 Option 4
Folder/File
number
Current position
in the file
File date File recording
start time
Recording format
(sound quality)
Duration of
the entire file
Folder/File
number
Available
recording time
Hold “on”
Hold “off”
Recording/Playback
Owner’s Manual
12
Recording/Playback
Recording
1. Press the [●] (REC) button.
The PR7 enters recording
standby mode.
2. Press the [REC LEVEL] but-
ton.
3. Use the [+] and [–] buttons to adjust
the recording level.
Make sure that the level meter is not
“pinned” all the way to the right.
4. Press the [REC LEVEL] button
again to call up the record-
ing standby screen.
5. Press the [●] (REC) button
again.
Recording starts.
6. To stop, press the [■] (Stop)
button.
The playback position will
automatically return to the
beginning of the recorded audio file.
Playback
1. Press the [ ] (Play) but-
ton.
2. Use the [+] and [–] but-
tons to adjust the play-
back level.
3. To stop, press the [■]
(Stop) button.
Other controls during playback
• Fast forward/fast reverse
Press and hold down the [<] or [>] but-
tons during playback.
• Pause
Press the [ ] (Play) button during
playback.
Selecting a file
Selecting a file in the same
folder
1. Use the [<] or [>] but-
tons while the PR7 is
stopped or playing.
Moving a file from one folder to another
➔ page 14
Switching between the built-in memory
and a microSD card
➔ page 14
Guideline for
maximum volume
Up
Down
Up
Down
Changing the recording format (sound quality)
Owner’s Manual
13
Changing the recording
format (sound quality)
1. Press the [REC SET] button.
2. Use the [+] and [–] but-
tons to select “MP3
PCM” from the record-
ing setting menu, then
press the [ ] (Play)
button.
3. Use the [+] and [–] buttons to select
“PCM” or “MP3”, then press the [ ]
(Play) button.
4. Use the [+] and [–] buttons to specify
the sound quality (format), then press
the [ ] (Play) button.
NOTE
For PCM recording, you can specify the sampling
frequency (kHz) and bit depth (bit).
Supported formats, sound quality, and data size
5. After the setting process is
complete, press the [■]
(Stop) button.
The PR7 calls up the HOME
screen.
Estimated available recording time
(with internal 2GB memory)
* If you record multiple files, the total available recording
time will be shorter than those estimated above.
* The largest available recording space (for continuous
recording) per file is 2GB. If the recording file size
reaches 2GB, the PR7 will automatically continue record-
ing into a subsequent file (when using a microSDHC
card). However, the unit will be unable to record continu-
ously if the recording exhausts the battery (
➔
page 29).
* To display the available recording time, press the [■]
(Stop) button repeatedly while the HOME screen is
displayed.
PCM
(WAV)
kHz
96, 88.2, 48, 44.1
(indicated as 88) (indicated as 44)
bit 24,16
MP3 kbps 320, 192, 128, 64, 32
Sound
quality
Better
Size
Larger
Recording mode
Available recording time
(estimated)
PCM
(WAV)
24-bit
96kHz Approx. 55 minutes
88.2kHz Approx. 1 hour
48kHz Approx. 1 hour 45 minutes
44.1kHz Approx. 1 hour 55 minutes
16-bit
96kHz Approx. 1 hour 20 minutes
88.2kHz Approx. 1 hour 25 minutes
48kHz Approx. 2 hours 40 minutes
44.1kHz Approx. 2 hours 55 minutes
MP3
320kbps Approx. 12 hours 45 minutes
192kbps Approx. 21 hours
128kbps Approx. 32 hours
64kbps Approx. 64 hours
32kbps Approx. 127 hours
Specifying the recording destination
Owner’s Manual
14
Specifying the recording
destination
Switching between the built-in
memory and a microSD card
1. Press the [REC SET] button.
2. Use the [+] and [–] but-
tons to select “SD” from
the recording setting
menu, then press the
[ ] (Play) button.
3. Use the [+] and [–] buttons to select
“Int” (built-in memory) or “Sd”
(microSD card), then press the [ ]
(Play) button.
4. After the setting process is
complete, press the [■]
(Stop) button.
The PR7 calls up the HOME
screen.
Selecting the recording destination
folder
1. Press and hold down the
[MENU] button for at least
two seconds.
2. Use the [+] and [–] but-
tons to select “rEC”
(REC/for recording
only) or “MSC”
(MUSIC/for playback
only), then press the
[ ] (Play) button.
3. Use the [+] and [–] buttons to select a
folder (R1, M1, etc.), then press the
[ ] (Play) button.
After the setting is confirmed, the PR7
automatically calls up the HOME screen.
Specifying the recording destination
Owner’s Manual
15
Folder structure
The folders in built-in memory are structured
as follows:
The REC folder and MUSIC folder are auto-
matically created on a microSD card when
the card is inserted into the unit.
• REC folder
Stores audio files that were recorded on the
unit.
•MUSIC folder
Stores files that were copied from a computer.
PCM, MP3, and WMA files are supported for
playback. This folder is used for playback only.
You cannot copy or divide files in the MUSIC
folder.
• MANUAL folder
Stores the Reference Manual. This folder is
included only in built-in memory.
About the limitations of files and
folders
The size and the number of folders and files
are limited.
• The number of files per folder: Up to 99
files
As soon as you start recording the 100th file,
an error message (page 28) will be displayed
and you will be unable to record.
• Maximum file size: 2GB
If recording is extended and its size exceeds
2GB, the
PR7 will create a new file and con-
tinue recording in two seconds.
NOTE
If you plan to record audio of lengthy duration, use
a microSDHC card that can accommodate large
files.
About the file format
The PR7 supports only those file formats that
are available as recording format options on
the unit.
Recording format ➔ page 13
R0
R1
R2
R9
M0
M1
M2
M9
REC
MUSIC
MANUAL
(For record-
ing only)
(Only in built-in
memory)
(For play-
back only)
Default folder
PR7_RM_JA (Reference Manual, Japanese)
PR7_RM_EN (Reference Manual, English)
PR7_RM_DE (Reference Manual, German)
PR7_RM_FR (Reference Manual, French)
PR7_RM_ES (Reference Manual, Spanish)
PR7_RM_IT (Reference Manual, Italian)
PR7_RM_RU (Reference Manual, Russian)
PR7_RM_ZH (Reference Manual, Chinese)
Reducing noise
Owner’s Manual
16
Reducing noise
Preventing low-range noise
(High-pass filter)
The high-pass filter reduces low-range ambi-
ent noises, such as footsteps or rumbling
caused by the wind.
1. Press the [REC SET] button.
2. Use the [+] and [–] but-
tons to select “HPF”
from the recording set-
ting menu, then press
the [ ] (Play) button.
3. Use the [+] and [–] buttons to select
“On”, then press the [ ] (Play) but-
ton.
4. After the setting process is
complete, press the [■]
(Stop) button.
The PR7 calls up the HOME
screen.
Preventing excessive input level
(Dynamics control)
This function prevents excessive input levels
that could cause audio clipping or noise.
1. Press the [REC SET] button.
2. Use the [+] and [–] but-
tons to select “DYN”
from the recording set-
ting menu, then press
the [ ] (Play) button.
3. Use the [+] and [–] buttons to select
“LIM” (Limiter), “ALC HI” (for soft
sounds), or “ALC LO” (for loud
sounds), then press the [ ] (Play)
button.
4. After the setting process is
complete, press the [■]
(Stop) button.
The PR7 calls up the HOME
screen.
Selecting a recording preset
Owner’s Manual
17
Selecting a recording preset
The PR7 offers presets that feature predeter-
mined parameter settings to optimize the
recording source.
1. Press and hold down the
[REC SET] button for at least
two seconds while the PR7 is
stopped.
2. Use the [+] and [–] but-
tons to select a preset
that is suitable for the
recording source, then
press the [ ] (Play)
button.
Available presets
• OFF (musical instrument)
• bAnd (band)
• SPEECH (conference/speech)
• FIELd (field recording)
• nEAr (recording closer to the musical
instrument/close miking)
Overdubbing (Layered recordings)
You can layer a recording over an existing
audio file and create a new file. This process
is called “overdubbing.” Make sure to con-
nect a set of headphones when doing this;
overdubbing cannot be executed by using
the built-in speaker.
1. Select a file that you want to
use for overdubbing, then
press the [OVERDUB] button.
2.
Press the [REC LEVEL] button.
3. Press the [+] or [–] button to
adjust the recording level.
Press the [<] or [>] button to
adjust the playback level.
4. Press the [REC LEVEL] button
again to display the previous
screen.
5. Press the [●] (REC) button.
Overdubbing starts.
6. After recording is complete
and the PR7 plays the original
file to the end, press the [■]
(Stop) button.
The PR7 calls up the HOME screen.
Other operations available during overdubbing
[ ] (Play) button ➔ Pause
[●] (REC) button ➔ Dubbing
Punch in/out
➔
Refer to the Reference Manual
Adding or deleting a marker
Owner’s Manual
18
Adding or deleting a marker
You can insert a marker into the file to mark
the playback position.
1. Press the [MARK] button.
2. While the PR7 is stopped, playing, or
recording, press the [+] button at the
location where you want to add a
marker.
A numbered marker is added.
3. To delete a marker, press the [+] but-
ton at the position of the marker you
want to delete.
NOTE
You can delete markers only while operation is
stopped or playback is paused.
You can delete only the marker at the current loca-
tion.
You can add up to 36 markers per file.
There should be two seconds or longer between
markers.
Repeat playback
You can repeatedly play back between adja-
cent markers.
1. Press the [MARK] button.
2. Insert markers at the start
and end points of the por-
tion you want to play
repeatedly.
3. Press the [<] button to locate
the start point of the Repeat
playback portion.
4. While the PR7 is stopped or playing,
press the [–] button to activate Repeat
playback.
5. To cancel Repeat playback,
press the [–] button again.
NOTE
If an audio file does not include any markers, the
PR7 will play the entire file repeatedly if you acti-
vate Repeat playback.
Adjusting the playback speed
Owner’s Manual
19
Adjusting the playback speed
You can decrease or increase the playback
speed, if necessary.
1. Press the [MENU] button.
2. Use the [+] and [–] but-
tons to select “SPD”,
then press the [ ]
(Play) button.
3. Use the [+] and [–] buttons to select
the desired playback speed (expressed
as a percentage), then press the [ ]
(Play) button.
Setting range: 50%–200%
4. After the setting process is
complete, press the [■] (Stop)
button.
The PR7 calls up the HOME screen.
NOTE
• Pressing the [MENU] button during playback
enables you to change only the playback speed.
• PCM: With files recorded at sampling rates of
96kHz/88.2kHz, you can set the playback speed
in the range of 50% to 150%.
Tuner
You can use the tuner to tune your musical
instrument.
1. Press the [MENU] button.
2. Use the [+] and [–] but-
tons to select “TUN”,
then press the [ ]
(Play) button.
3. Use the [+] and [–] buttons to specify
the standard pitch (A=), then press the
[ ] (Play) button.
Setting range: 430–450Hz
4. Play and tune the musical instrument.
5. After tuning is complete,
press the [■] (Stop) button.
The PR7 calls up the HOME
screen.
Align with the
center segment.
Key
Metronome
Owner’s Manual
20
Metronome
Make settings for the metronome used dur-
ing recording.
You can also use the metronome in the met-
ronome settings screen (Step 6).
NOTE
During recording, the metronome sound is output
only from the PHONES (headphone) jack.
1. Press the [MENU] button.
2. Use the [+] and [–] but-
tons to select “MET”,
then press the [ ]
(Play) button.
3. Press the [>] button to select On/
OFF parameter, then press the
[ ] (Play) button.
4.
Use the [+] and [–] buttons to select
“On”, then press the [] (Play) button.
5. Press the [<] button to select
“SEt” then press the [ ] (Play)
button.
6. Use the [+] and [–] buttons to specify
the tempo value, then press the [ ]
(Play) button.
Setting range: 30–250
7. Use the [+] and [–] buttons to specify
the beat value, then press the [ ]
(Play) button.
Setting range: 0/4–8/4
8. After the setting process is
complete, press the [■]
(Stop) button.
The PR7 calls up the HOME
screen.
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
Strona jest ładowana ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
Yamaha PR7 Instrukcja obsługi
- Kategoria
- Dyktafony
- Typ
- Instrukcja obsługi
- Ten podręcznik jest również odpowiedni dla
w innych językach
- čeština: Yamaha PR7 Návod k obsluze
- español: Yamaha PR7 El manual del propietario
- italiano: Yamaha PR7 Manuale del proprietario
- Deutsch: Yamaha PR7 Bedienungsanleitung
- svenska: Yamaha PR7 Bruksanvisning
- português: Yamaha PR7 Manual do proprietário
- français: Yamaha PR7 Le manuel du propriétaire
- Türkçe: Yamaha PR7 El kitabı
- English: Yamaha PR7 Owner's manual
- dansk: Yamaha PR7 Brugervejledning
- русский: Yamaha PR7 Инструкция по применению
- suomi: Yamaha PR7 Omistajan opas
- Nederlands: Yamaha PR7 de handleiding
- română: Yamaha PR7 Manualul proprietarului