AEG FFB93700PM Instrukcja obsługi

Marka: AEG

Model: FFB93700PM

Kategoria: Zmywarki

Typ: Instrukcja obsługi

USER

MANUAL

EN User Manual 2

Dishwasher

PL Instrukcja obsługi 26

Zmywarka

FFB93700PM

CONTENTS

1. SAFETY INFORMATION.............................................................................................2

2. SAFETY INSTRUCTIONS.............................................................................................4

3. PRODUCT DESCRIPTION...........................................................................................6

4. CONTROL PANEL....................................................................................................... 7

5. PROGRAMMES............................................................................................................8

6. SETTINGS.....................................................................................................................9

7. OPTIONS....................................................................................................................11

8. BEFORE FIRST USE................................................................................................... 13

9. DAILY USE..................................................................................................................15

10. HINTS AND TIPS..................................................................................................... 17

11. CARE AND CLEANING.......................................................................................... 18

12. TROUBLESHOOTING.............................................................................................21

13. TECHNICAL INFORMATION................................................................................. 24

FOR PERFECT RESULTS

Thank you for choosing this AEG product. We have created it to give you

impeccable performance for many years, with innovative technologies that help

make life simpler features you might not find on ordinary appliances. Please

spend a few minutes reading to get the very best from it.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.aeg.com/webselfservice

www.registeraeg.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.aeg.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

SAFETY INFORMATION

Before the installation and use of the appliance,

carefully read the supplied instructions. The

www.aeg.com2

manufacturer is not responsible for any injuries or

damages that are the result of incorrect installation or

usage. Always keep the instructions in a safe and

accessible location for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep detergents away from children.

• Keep children and pets away from the appliance when

the door is open.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

• This appliance is intended to be used in household

and similar applications such as:

– farm houses; staff kitchen areas in shops, offices

and other working environments;

– by clients in hotels, motels, bed & breakfast and

other residential type environments.

• Do not change the specification of this appliance.

• The operating water pressure (minimum and

maximum) must be between 0.5 (0.05) / 8 (0.8) bar

(MPa)

• Obey the maximum number of 15 place settings.

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

• Put the cutlery in the cutlery basket with the sharp

ends pointing down or put them in the cutlery drawer

in a horizontal position with the sharp edges down.

ENGLISH

• Do not leave the appliance with the open door

unattended to avoid stepping accidentally onto it.

• Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the

socket.

• Do not use high pressure water sprays and/or steam

to clean the appliance.

• If the appliance has ventilation openings in the base,

they must not be covered e.g. by a carpet.

• The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

2. SAFETY INSTRUCTIONS

2.1 Installation

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Do not install or use the appliance

where the temperature is less than 0

°C.

• Follow the installation instruction

supplied with the appliance.

2.2 Electrical connection

WARNING!

Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need

to be replaced, this must be carried

out by our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance complies with the

E.E.C. Directives.

• Only for UK and Ireland. The

appliance has a 13 amp mains plug. If

it is necessary to change the fuse in

the mains plug, use fuse: 13 amp

ASTA (BS 1362).

2.3 Water connection

• Do not cause damage to the water

hoses.

• Before connection to new pipes,

pipes not used for a long time, where

repair work has been carried out or

new devices fitted (water meters,

etc.), let the water flow until it is clean

and clear.

• Ensure that there are no visible water

leaks during and after the first use of

the appliance.

• The water inlet hose has a safety valve

and a sheath with an inner mains

cable.

www.aeg.com4

WARNING!

Dangerous voltage.

• If the water inlet hose is damaged,

immediately close the water tap and

disconnect the mains plug from the

mains socket. Contact the Authorised

Service Centre to replace the water

inlet hose.

2.4 Use

• Do not sit or stand on the open door.

• Dishwasher detergents are

dangerous. Obey the safety

instructions on the detergent

packaging.

• Do not drink and play with the water

in the appliance.

• Do not remove the dishes from the

appliance until the programme is

complete. Some detergent may

remain on the dishes.

• The appliance can release hot steam

if you open the door while a

programme operates.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

2.5 Internal light

WARNING!

Risk of injury.

• This appliance has an internal lamp

that comes on when you open the

door and goes off when the door is

closed.

• The lamp in this appliance is not

suitable for household room

illumination.

• To replace the lamp, contact the

Service.

2.6 Service

• Contact the Authorised Service

Centre to repair the appliance. We

recommend only the use of original

spare parts.

• When you contact the Authorised

Service Centre, ensure that you have

the following information that is

available on the rating plate.

Model :

PNC :

Serial Number :

2.7 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

ENGLISH

3. PRODUCT DESCRIPTION

Worktop

Top spray arm

Upper spray arm

Lower spray arm

Filters

Rating plate

Salt container

Air vent

Rinse aid dispenser

Detergent dispenser

Lower basket

Upper basket

Cutlery drawer

www.aeg.com6

4. CONTROL PANEL

32 4 5 6

789

On/off button

Program key

Navigation key (up)

Display

Delay key

MyFavourite key

OK key

Option key

Navigation key (down)

Back key

4.1 Key behaviour

Program key

• Short press enters the programme

list. Default programme: ECO.

• Long press (3 sec.) when a

programme is running will delete the

programme. The display shows the

default programme.

• Press at the same time the keys

Program and Back to activate or

deactivate the option Child lock.

MyFavourite key

• Short press starts the MyFavourite

programme. The first time this key is

pressed the display will show the

setting Set MyFavourite.

• Long press shows the setting Set

MyFavourite.

Delay key

• Press to set the delay start of a

programme.

Option key

• Short press when in programme list,

shows the options list.

OK key

• Press to confirm options and settings.

• Press to start a programme or the

delay start.

Navigation keys

• Use these keys to scroll the lists and

information texts.

Back key

• Goes back to the previous screen.

ENGLISH

5. PROGRAMMES

Programme Degree of soil

Type of load

Programme phases Options

ECO 50°

• Normal soil

• Crockery and cut-

lery

• Prewash

• Wash 50 °C

• Rinses

• Dry

• ExtraHygiene

• TimeSaver

• XtraDry

AutoSense 45°-

70°

• All

• Crockery, cutlery,

pots and pans

• Prewash

• Wash from 45 °C

to 70 °C

• Rinses

• Dry

• ExtraHygiene

• XtraDry

PROZONE 50°-

65°

• Mixed soil

• Crockery, cutlery,

pots and pans

• Prewash

• Wash 50 °C and

65 °C

• Rinses

• Dry

• TimeSaver

• XtraDry

Intensive 70° • Heavy soil

• Crockery, cutlery,

pots and pans

• Prewash

• Wash 70 °C

• Rinses

• Dry

• ExtraHygiene

• TimeSaver

• XtraDry

30 MIN 60°

• Fresh soil

• Crockery and cut-

lery

• Wash 60 °C

• Rinses

• ExtraHygiene

• XtraDry

Glass 45° • Normal or light

soil

• Delicate crockery

and glassware

• Wash 45 °C

• Rinses

• Dry

• XtraDry

Extra silent 50°

• Normal soil

• Crockery and cut-

lery

• Prewash

• Wash 50 °C

• Rinses

• Dry

• XtraDry

www.aeg.com8

Programme Degree of soil

Type of load

Programme phases Options

Rinse&Hold

• All • Prewash

With this programme you have the most efficient use of water and energy consumption for crockery

and cutlery with normal soil. (This is the standard programme for test institutes).

The appliance senses the degree of soil and the quantity of items in the baskets . It automatically ad-

justs the temperature and the quantity of water, the energy consumption and the programme duration.

With this programme you can wash a load with mixed soil. Very heavy soil in the lower basket and

normal soil in the upper basket. The pressure and the temperature of the water in the lower basket are

higher than in the upper basket.

With this programme you can wash a load with fresh soil. It gives good washing results in a short time.

This is the most silent programme. The pump works at a very low speed to decrease the level of noise.

Because of the low speed, the programme duration is long.

With this programme you can quickly rinse dishes to prevent remains of food to bond on dishes and

odours to form in the appliance. Do not use detergent with this programme.

5.1 Consumption values

Programme

Water

(l)

Energy

(kWh)

Duration

(min)

ECO 50° 11 0.857 232

AutoSense 45°- 70° 7 - 14 0.6 - 1.6 40 - 170

PROZONE 50°- 65° 14 - 16 1.2 - 1.5 160 - 180

Intensive 70° 12.5-14.5 1.4-1.7 170-190

30 MIN 60° 10 0.9 30

Glass 45° 12 - 14 0.7 - 0.9 82-92

Extra silent 50° 9 - 10 1.1 - 1.3 230 - 250

Rinse&Hold 4 0.1 14

The pressure and the temperature of the water, the variations of the mains supply, the options and the

quantity of dishes can change the values.

5.2 Information for test

institutes

For all the necessary information for test

performance, send an email to:

[email protected]

Write down the product number (PNC)

that is on the rating plate.

6. SETTINGS

6.1 Settings list

To see the settings list, select Settings in

the option list.

ENGLISH

Settings Values Description

MyFavourite List of programmes Set your favourite daily pro-

gramme. Refer to specific in-

formation provided in this

chapter.

AirDry ON (default value)

OFF

Set the automatic door

opening for all programmes

except Rinse&Hold. Refer to

the specific information pro-

vided in this chapter.

Brightness From level 0 to level 9. Change the brightness of

the display.

Contrast From level 0 to level 9. Change the contrast of the

display.

Water hardness From level 1 to level

10.

Set the level of the water

softener according to the

water hardness in your area.

Factory setting: level 5.

Rinse aid level From level 0 to level 6.

Level 0 = no release of

rinse aid.

Set the level of the rinse aid

dispenser according to the

necessary quantity of rinse

aid.

Factory setting: level 4.

Languages List of languages. Set the preferred language.

Default language: English.

Reset settings Reset Reset the appliance to facto-

ry settings.

6.2 How to change a setting

with 2 values (ON and OFF)

When a setting is changed it will remain

valid even if the programme is

completed or a running programme is

cancelled.

1. Press the Option key.

2. Select Settings.

3. Press the OK key.

4. Select the setting to change.

5. Press the OK key to change the value

from ON to OFF or vice versa.

6. Press repeatedly the Option key until

the display shows the programme

list.

6.3 How to change a setting

with multiple values

When a setting is changed it will remain

valid even if the programme is

completed or a running programme is

cancelled.

1. Press the Option key.

2. Select Settings.

3. Press the OK key.

4. Select the setting to change.

5. Press the OK key to enter the next

level.

6. Select the new value.

7. Press the OK key to confirm.

8. Press repeatedly the Option key until

the display shows the programme

list.

www.aeg.com10

6.4 How to save the

MyFavourite programme

You can only save 1 programme at a

time. A new setting cancels the previous

one.

1. Press the Option key.

2. Select Settings.

3. Press the OK key.

4. Select MyFavourite.

5. Press the OK key.

The display shows the programme list.

6. Select a programme.

7. Press the OK key.

8. The display shows Add option and

Done.

• Select Done if you want to save a

programme without options and

press the OK key.

• Select Add option to add an

option to the programme and

press the OK key to confirm.

Once an option has been

selected the display shows Add

option and Done. If you want to

select another option select again

Add option otherwise select

Done.

9. Press the OK key.

If the programme has the TimeSaver

option, you have to select Fast or

Normal.

10. Press the OK key to confirm.

The display confirms that the

MyFavourite programme has been

saved.

6.5 AirDry

AirDry improves the drying results with

less energy consumption.

While the drying phase

operates, a device opens the

appliance door. The door is

then kept ajar.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

open. This can cause

damage to the appliance.

CAUTION!

In case of presence of

children, the AirDry system

can be deactivated if you

want to keep the door

closed in the end of the

cycle.

AirDry is automatically activated with all

programmes excluding Rinse&Hold.

To improve the drying performance refer

to the XtraDry option or activate AirDry.

OPTIONS

Desired options must be

activated every time before

you start a programme.

It is not possible to activate

or deactivate options while a

programme is running.

Not all options are

compatible with each other.

If you have selected non

compatible options, the

appliance will automatically

deactivate one or more of

them. Only the indicators of

the options still active will

stay on.

ENGLISH

7.1 Option list

Options Values Description

Delay start From 1 to 24 hours

OFF (default value)

Delay the start of the pro-

gramme.

XtraDry ON

OFF (default value)

Activate this option if you

want to boost the drying

performance. Refer to spe-

cific information provided in

this chapter.

ExtraHygiene ON

OFF (default value)

The use of this option sani-

tizes cutlery and tableware.

During the last rinsing

phase, the temperature stays

at 70 °C for at least 10 mi-

nutes.

Settings Enter appliance settings

7.2 How to set an option

The option list will show only the options

applicable to the currently selected

programme. Non applicable options are

not visible.

Some options are not compatible with

each other. When you set 2 options that

are not compatible with each other, the

appliance will automatically deactivate

one of the options.

When the programme is completed or is

cancelled the options are set to the

default values.

1. Press the Option key.

2. Select an option.

The display shows the option value

indicated in parenthesis.

3. Press the OK key to change the value

from OFF to ON or vice versa.

If the selected option is Delay start, when

you press the OK key the display shows

the number of hours available for the

delay start. Select the number of hours

and press again the OK key to confirm.

4. To go back to the programme list,

press repeatedly the Option key until

the display shows the selected

programme.

7.3 XtraDry

Activate this option when you want to

boost the drying performance. With use

of this option, the duration of some

programmes, water consumption and

the last rinse temperature can be

affected.

The XtraDry option is a permanent

option for all programmes other than

ECO 50° and need not to be selected at

every cycle.

Every time ECO 50° is activated, XtraDry

option is off and needs to be chosen

manually. In other programmes, the

setting of XtraDry is permanent and it is

automatically used in next cycles. This

configuration can be changed at any

time.

Activating XtraDry option deactivates

TimeSaver.

7.4 TimeSaver

This option increases the pressure and

the temperature of the water.

The washing and drying phases are

shorter. The total programme duration

decreases by approximately 50%.

www.aeg.com12

The washing results are the same as with

the normal programme duration but the

drying results can be less satisfactory.

The TimeSaver option is not applicable

to all programmes.

1. Scroll through the programme list

and select a programme.

2. Press the OK key to confirm.

If the TimeSaver option is applicable to

the selected programme, the display

shows the 2 conditions Fast and Normal

and the programme duration for each

condition:

• Fast: TimeSaver activated. Press

the OK key to confirm.

• Normal: TimeSaver deactivated.

Press the OK key to confirm.

7.5 Child lock

This option prevents children to play with

the keys on the control panel while a

programme is running or when the

appliance is activated and ready for use.

If you activate the Child lock option while

the programme ECO is running, the

option AirDry is automatically

deactivated.

Press at the same time the Program and

the Back keys.

The display shows the message that the

Child lock option is active.

To deactivate the Child lock option,

repeat the procedure.

8. BEFORE FIRST USE

The first time you activate the appliance

it is necessary to set the language.

Default language is English.

1. Set the language.

• Press OK to confirm English.

• Scroll the list of available

languages for a new language

and press OK to confirm.

2. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

3. Fill the salt container.

4. Fill the rinse aid dispenser.

5. Open the water tap.

6. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

When you start a programme, the

appliance can take up to 5 minutes to

recharge the resin in the water softener.

It seems that the appliance is not

working. The washing phase starts only

after this procedure is completed. The

procedure will be repeated periodically.

8.1 The water softener

The water softener removes minerals

from the water supply, which would have

a detrimental effect on the washing

results and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. It is important to set the

right level of the water softener to assure

good washing results.

Water hardness

German de-

grees (°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener lev-

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

ENGLISH

German de-

grees (°dH)

French degrees

(°fH)

mmol/l Clarke de-

grees

Water softener lev-

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

Factory setting.

Do not use salt at this level.

Whether you use a standard detergent

or multi-tabs (with or without salt), set

the proper water hardness level to

keep the salt refill indicator active.

Multi-tabs containing salt

are not effective enough to

soften hard water.

8.2 The salt container

CAUTION!

Use salt designed for

dishwashers only.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt

container (Only for the first time).

3. Fill the salt container with dishwasher

salt.

4. Remove the salt around the opening

of the salt container.

5. Turn the cap of the salt container

clockwise to close the salt container.

Water and salt can come out

from the salt container when

you fill it. Risk of corrosion.

To prevent it, after you fill

the salt container, start a

programme.

When the salt container

needs refilling, the display

shows a message.

www.aeg.com14

8.3 The rinse aid dispenser

The rinse aid helps to dry the dishes

without streaks and stains.

The rinse aid is automatically released

during the hot rinse phase.

It is possible to set the released quantity

of rinse aid between level 1 (minimum

quantity) and level 6 (maximum quantity).

Level 0 deactivates the rinse aid

dispenser and no rinse aid is released.

Factory setting: level 4.

How to fill the rinse aid

dispenser

CAUTION!

Only use rinse aid

specifically designed for

dishwashers.

1. Open the lid (C).

2. Fill the dispenser (B) until the rinse

aid reaches the marking ''MAX''.

3. Remove the spilled rinse aid with an

absorbent cloth to prevent too much

foam.

4. Close the lid. Make sure that the lid

locks into position.

Fill the rinse aid dispenser

when the indicator (A)

becomes clear.

When the rinse aid

dispenser needs refilling, the

display shows a message.

If you use multi-tablets and the drying

performance is satisfactory, the rinse aid

refill indication can be disabled by

setting the rinse aid level to 0.

We recommend to always

use rinse aid for better

drying performance, also in

combination with multi-

tablets containing rinsing

agent.

9. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate

the appliance.

Make sure that the appliance is in

programme selection mode.

• If the display shows the salt

refilling message, fill the salt

container.

• If the rinse aid empty message is

shown, fill the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme

for the type of load and the degree

of soil.

9.1 Using the detergent

ENGLISH

CAUTION!

Only use detergent

specifically designed for

dishwashers.

1. Press the release button (A) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (B).

3. If the programme has a prewash

phase, put a small quantity of

detergent on the inner part of the

appliance door.

4. Close the lid. Make sure that the lid

locks into position.

9.2 Setting and starting a

programme

The Auto Off function

This function decreases energy

consumption by deactivating

automatically the appliance when it is not

operating.

The function comes into operation:

• 5 minutes after the completion of the

programme.

• After 5 minutes if the programme has

not started.

Starting a programme

When you activate the appliance, the

display shows the programme list. The

programme ECO is always the default

programme.

1. Scroll the programme list and select

a programme.

2. Select applicable options if desired.

Once options are set, go back to the

programme list to start the selected

programme.

3. Press OK.

If the programme is applicable to the

option TimeSaver, you have to confirm

Fast or Normal.

4. Close the appliance door to start the

programme

How to delay the start of a

programme

It is not possible to set the delay start

with the MyFavourite programme.

1. Set the programme.

2. Press the Delay key.

The delay time is indicated in the upper

right corner of the display.

3. Press repeatedly the Delay key to

increase the number of hours of the

delay start. You can delay the start of

the programme from 1 to 24 hours.

4. Press the OK key to confirm and to

start the countdown. When the

countdown is completed, the

programme starts.

Starting the MyFavourite

programme

1. Press the on/off button to activate

the appliance.

2. Close the appliance door.

3. Press the MyFavourite key, the

programme starts.

Opening the door while the

appliance operates

If you open the door while a programme

is running, the appliance stops. It may

affect the energy consumption and the

programme duration. When you close

the door, the appliance continues from

the point of interruption.

If the door is opened for

more that 30 seconds during

the drying phase, the

running programme will end.

This will not happen when

programme ECO with AirDry

is running.

Cancelling the delay start while

the countdown operates

When you cancel the delay start the

programme and the options are set to

their default values.

1. Open the appliance door.

www.aeg.com16

2. Press and hold the Program key for

about 3 seconds until the display

shows Stop washing?.

• Select Resume to continue with

the countdown. Press the OK key

to confirm.

• Select Stop to cancel the delay

start. Press the OK key to confirm.

Cancelling a running

programme

1. Open the appliance door.

2. Press and hold the Program key for

about 3 seconds until the display

shows Stop washing?.

• Select Resume to continue with

the running programme. Press the

OK key to confirm.

• Select Stop to cancel the running

programme. Press the OK key to

confirm.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of programme

When the programme is completed the

display shows 0:00 and End of program.

1. Press the on/off button or wait for

the Auto Off function to

automatically deactivate the

appliance. If you open the door

before the activation of Auto Off ,

the appliance is automatically

deactivated.

2. Close the water tap.

10. HINTS AND TIPS

10.1 General

The following hints will ensure optimal

cleaning and drying results in daily use

and also help to protect the

environment.

• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand.

When needed, use the prewash

programme (if available) or select a

programme with a prewash phase.

• Always use the whole space of the

baskets.

• When loading the appliance, make

sure that the dishes can be

completely reached and washed by

the water released from the spray arm

nozzles. Make sure that items do not

touch or cover each other.

• You can use dishwasher detergent,

rinse aid and salt separately or you

can use the multi-tablets (e.g. ''3in1'',

''4in1'', ''All in 1''). Follow the

instructions written on the packaging.

Multi-tablets are usually suitable in

areas with a water hardness up to 21

°dH. In areas exceeding this limit,

rinse aid and salt must also be used.

• Select the programme according to

the type of load and degree of soil.

With the ECO programme you have

the most efficient use of water and

energy consumption for crockery and

cutlery with normal soil.

10.2 Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

for dishwasher. Other products can

cause damage to the appliance.

• Multi-tablets are usually suitable in

areas with a water hardness up to 21

°dH. In areas exceeding this limit,

rinse aid and salt must be used in

addition to the multi-tablets.

However, in areas with hard and very

hard water we recommend to use

solo-detergent (powder, gel, tablets

without additional functions), rinse aid

and salt separately for optimal

cleaning and drying results.

• Rinse aid dispensing can be

deactivated when using multi-tablets,

but we recommend to always use

rinse aid for better drying

performance.

The water softener level can also be

set to the lowest value when using

multi-tablets and the water hardness

level is lower than 21 °dH.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

detergent residues on the tableware,

ENGLISH

we recommend that you use the

tablets with long programmes.

• Do not use more than the correct

quantity of detergent. Refer to the

instructions on the detergent

packaging.

10.3 What to do if you want to

stop using multi-tablets

Before you start to use separately

detergent, salt and rinse aid do the

following procedure.

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

4. When the programme is completed,

adjust the water softener according

to the water hardness in your area.

5. Adjust the released quantity of rinse

aid.

6. Activate the rinse aid empty

notification.

10.4 Loading the baskets

• Only use the appliance to wash items

that are dishwasher-safe.

• Do not put in the appliance items

made of wood, horn, aluminium,

pewter and copper.

• Do not put in the appliance items that

can absorb water (sponges,

household cloths).

• Remove larger residues of food from

the dishes into the waste bin.

• Make soft the remaining burned food

on the items.

• Put hollow items (cups, glasses and

pans) with the opening down.

• Make sure that glasses do not touch

other glasses.

• Put cutlery and small items in the

cutlery drawer.

• Put light items in the upper basket.

Make sure that the items do not

move.

• Make sure that the spray arms can

move freely before you start a

programme.

10.5 Before starting a

programme

Make sure that:

• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is dishwasher salt and rinse aid

(unless you use multi- tablets).

• The position of the items in the

baskets is correct.

• The programme is applicable for the

type of load and for the degree of

soil.

• The correct quantity of detergent is

used.

10.6 Unloading the baskets

1. Let the tableware cool down before

you remove it from the appliance.

Hot items can be easily damaged.

2. First remove items from the lower

basket, then from the upper basket.

At the end of the program

water can still remain on the

sides and on the door of the

appliance.

11. CARE AND CLEANING

WARNING!

Before maintenance,

deactivate the appliance and

disconnect the mains plug

from the main socket.

Dirty filters and clogged

spray arms decrease the

washing results. Make a

check regularly and, if

necessary, clean them.

www.aeg.com18

11.1 Cleaning the filters

The filter system is made of 3 parts.

1. Turn the filter (B) counterclockwise

and remove it.

2. Remove the filter (C) out of filter (B).

3. Remove the flat filter (A).

4. Wash the filters.

5. Make sure that there are no residues

of food or soil in or around the edge

of the sump.

6. Put back in place the flat filter (A).

Make sure that it is correctly

positioned under the 2 guides.

7. Reassemble the filters (B) and (C).

8. Put back the filter (B) in the flat filter

(A). Turn it clockwise until it locks.

CAUTION!

An incorrect position of the

filters can cause bad

washing results and damage

to the appliance.

ENGLISH

11.2 Cleaning the spray arms

Do not remove the spray arms. If the

holes in the spray arms are clogged,

remove remaining parts of soil with a thin

pointed object.

11.3 Cleaning the upper spray

arm

We recommend to clean regularly the

upper spray arm to avoid soil to clog the

holes.

Clogged holes can cause unsatisfactory

washing results.

1. Pull out the upper basket.

2. To disengage the spray arm from the

basket, press the spray arm upwards

in the direction indicated by the

lower arrow and simultaneously turn

it clockwise.

3. Wash the spray arm under running

water. Use a thin pointed tool, e.g.

toothpick, to remove particles of soil

from the holes.

4. To engage again the spray arm to

the basket, press the spray arm

upwards in the direction indicated by

the lower arrow and simultaneously

turn it counterclockwise until it locks

into place.

11.4 External cleaning

• Clean the appliance with a moist soft

cloth.

• Only use neutral detergents.

• Do not use abrasive products,

abrasive cleaning pads or solvents.

11.5 Internal cleaning

• Carefully clean the appliance,

including the rubber gasket of the

door, with a soft damp cloth.

• If you regularly use short duration

programmes, these can leave

deposits of grease and limescale

inside the appliance. To prevent this,

we recommend to run long duration

programmes at least 2 times per

month.

• To maintain the performance of your

appliance at its best, we recommend

to use monthly a specific cleaning

product for dishwashers. Follow

carefully the instructions on the

packaging of the product.

www.aeg.com20

Strona jest ładowana ...

AEG FFB93700PM Instrukcja obsługi

Marka: AEG

Model: FFB93700PM

Kategoria: Zmywarki

Typ: Instrukcja obsługi

ściągnij PDF

raport

w innych językach

English: AEG FFB93700PM User manual

AEG FFB93700PM Instrukcja obsługi

AEG FFB93700PM Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty