Yamaha SU200 Instrukcja obsługi

Kategoria
Instrumenty muzyczne
Typ
Instrukcja obsługi
M.D.G., EMI Division, Yamaha Corporation
© 2000 Yamaha Corporation
V484910 004CRAP12.2-01A0 Printed in Japan
OWNER'S MANUAL
BEDIENUNGSANLEITUNG
MODE D'EMPLOI
This document is printed on recycled chlorine free (ECF) paper with soy ink.
Auf Recycling-Umweltpapier mit Sojatinte gedruckt.
Ce document a été imprimé sur du papier recyclé non blanchi au chlore
avec de l'encre d'huile de soja.
2
This product utilizes batteries or an external power supply (adapter).
DO NOT connect this product to any power supply or adapter other
than one described in the manual, on the name plate, or specifically
recommended by Yamaha.
WARNING: Do not place this product in a position where anyone could
walk on, trip over ,or roll anything over power or connecting cords of any
kind. The use of an extension cord is not recommended! IF you must use
an extension cord, the minimum wire size for a 25' cord (or less ) is 18
AWG. NOTE: The smaller the AWG number ,the larger the current
handling capacity. For longer extension cords, consult a local electrician.
This product should be used only with the components supplied or; a
cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is
used, please observe all safety markings and instructions that accom-
pany the accessory product.
SPECIFICATIONS SUBJECT TO CHANGE:
The information contained in this manual is believed to be correct at the
time of printing. However, Yamaha reserves the right to change or
modify any of the specifications without notice or obligation to update
existing units.
This product, either alone or in combination with an amplifier and head-
phones or speaker/s, may be capable of producing sound levels that
could cause permanent hearing loss. DO NOT operate for long periods
of time at a high volume level or at a level that is uncomfortable. If you
experience any hearing loss or ringing in the ears, you should consult
an audiologist.
IMPORTANT: The louder the sound, the shorter the time period before
damage occurs.
Some Yamaha products may have benches and / or accessory mounting
fixtures that are either supplied with the product or as optional accesso-
ries. Some of these items are designed to be dealer assembled or
installed. Please make sure that benches are stable and any optional
fixtures (where applicable) are well secured BEFORE using.
Benches supplied by Yamaha are designed for seating only. No other
uses are recommended.
NOTICE:
Service charges incurred due to a lack of knowledge relating to how a
function or effect works (when the unit is operating as designed) are not
covered by the manufacturer’s warranty, and are therefore the owners
responsibility. Please study this manual carefully and consult your
dealer before requesting service.
ENVIRONMENTAL ISSUES:
Yamaha strives to produce products that are both user safe and envi-
ronmentally friendly. We sincerely believe that our products and the
production methods used to produce them, meet these goals. In keep-
ing with both the letter and the spirit of the law, we want you to be
aware of the following:
Battery Notice:
This product MAY contain a small non-rechargeable battery which (if
applicable) is soldered in place. The average life span of this type of
battery is approximately five years. When replacement becomes
necessary, contact a qualified service representative to perform the
replacement.
This product may also use “household” type batteries. Some of these
may be rechargeable. Make sure that the battery being charged is a
rechargeable type and that the charger is intended for the battery
being charged.
When installing batteries, do not mix batteries with new, or with batter-
ies of a different type. Batteries MUST be installed correctly. Mis-
matches or incorrect installation may result in overheating and battery
case rupture.
Warning:
Do not attempt to disassemble, or incinerate any battery. Keep all
batteries away from children. Dispose of used batteries promptly and
as regulated by the laws in your area. Note: Check with any retailer of
household type batteries in your area for battery disposal information.
Disposal Notice:
Should this product become damaged beyond repair, or for some
reason its useful life is considered to be at an end, please observe all
local, state, and federal regulations that relate to the disposal of prod-
ucts that contain lead, batteries, plastics, etc. If your dealer is unable
to assist you, please contact Yamaha directly.
NAME PLATE LOCATION:
The name plate is located on the bottom of the product. The model
number, serial number, power requirements, etc., are located on this
plate. You should record the model number, serial number, and the
date of purchase in the spaces provided below and retain this manual
as a permanent record of your purchase.
Model
Serial No.
Purchase Date
SPECIAL MESSAGE SECTION
PLEASE KEEP THIS MANUAL
92-BP (bottom)
3
(4)-7
Do not operate the instrument for a long period of time at a high or uncomfortable
volume level, since this can cause permanent hearing loss. If you experience any hearing
loss or ringing in the ears, consult a physician.
DATA BACK-UP AND STORAGE
Yamaha recommends that you regularly save data using
a Memory Card (SmartMedia)
,
and storing the
Memory Cards
in a safe, cool, dry place. YAMAHA CANNOT BE HELD
RESPONSIBLE FOR THE ACCIDENTAL LOSS OF IMPORTANT MUSIC DATA!
Yamaha cannot be held responsible for damage caused by improper use or
modifications to the instrument, or data that is lost or destroyed.
Always turn the power off when the instrument is not in use.
Make sure to discard used batteries according to local regulations.
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
* Please keep these precautions in a safe place for future reference.
WARNING
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock,
short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:
Do not open the instrument or attempt to disassemble the internal parts or modify them
in any way. The instrument contains no user-serviceable parts. If it should appear to be
malfunctioning, discontinue use immediately and have it inspected by qualified Yamaha
service personnel.
Do not expose the instrument to rain, use it near water or in damp or wet conditions, or
place containers on it containing liquids which might spill into any openings.
If the AC adaptor cord or plug becomes frayed or damaged, or if there is a sudden loss
of sound during use of the instrument, or if any unusual smells or smoke should appear
to be caused by it, immediately turn off the power switch, disconnect the adaptor plug
from the outlet, and have the instrument inspected by qualified Yamaha service personnel.
Use the specified adaptor (PA-3B or an equivalent recommended by Yamaha) only.
Using the wrong adaptor can result in damage to the instrument or overheating.
Before cleaning the instrument, always remove the electric plug from the outlet. Never
insert or remove an electric plug with wet hands.
Check the electric plug periodically and remove any dirt or dust which may have
accumulated on it.
CAUTION
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the
instrument or other property. These precautions include, but are not limited to, the following:
Do not place the AC adaptor cord near heat sources such as heaters or radiators, and do
not excessively bend or otherwise damage the cord, place heavy objects on it, or place
it in a position where anyone could walk on, trip over, or roll anything over it.
When removing the electric plug from the instrument or an outlet, always hold the plug
itself and not the cord.
Do not connect the instrument to an electrical outlet using a multiple-connector. Doing
so can result in lower sound quality, or possibly cause overheating in the outlet.
Unplug the AC power adaptor when not using the instrument, or during electrical storms.
Always make sure all batteries are inserted in conformity with the +/- polarity markings.
Failure to do so might result in overheating, fire, or battery fluid leakage.
Always replace all batteries at the same time. Do not use new batteries together with old
ones. Also, do not mix battery types, such as alkaline batteries with manganese batteries,
or batteries from different makers, or different types of batteries from the same maker,
since this can cause overheating, fire, or battery fluid leakage.
Do not dispose of batteries in fire.
Do not attempt to recharge batteries that are not intended to be charged.
When the batteries run out, or if the instrument is not to be used for a long time, remove
the batteries from the instrument to prevent possible leakage of the battery fluid.
Keep batteries away from children.
Before connecting the instrument to other electronic components, turn off the power for
all components. Before turning the power on or off for all components, set all volume
levels to minimum. Also, be sure to set the volumes of all components at their minimum
levels and gradually raise the volume controls while playing the instrument to set the
desired listening level.
Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat
(such as in direct sunlight, near a heater, or in a car during the day) to prevent the
possibility of panel disfiguration or damage to the internal components.
Do not use the instrument near other electrical products such as televisions, radios, or
speakers, since this might cause interference which can affect proper operation of the
other products.
Do not place the instrument in an unstable position where it might accidentally fall over.
Before moving the instrument, remove all connected adaptor and other cables.
When cleaning the instrument, use a soft, dry cloth. Do not use paint thinners, solvents,
cleaning fluids, or chemical-impregnated wiping cloths. Also, do not place vinyl, plastic
or rubber objects on the instrument, since this might discolor the panel or keyboard.
Do not rest your weight on, or place heavy objects on the instrument, and do not use
excessive force on the buttons, switches or connectors.
If the batteries do leak, avoid contact with the leaked fluid. If the battery fluid should
come in contact with your eyes, mouth, or skin, wash immediately with water and
consult a doctor. Battery fluid is corrosive and may possibly cause loss of sight or
chemical burns.
4
Introduction
Thank you for your purchase of the SU200 Sampling Unit. The SU200 offers CD-quality
sample recording and easy pad-controlled replay of recorded samples. Its effect control
knobs and ribbon controller allow you to apply scratch, filtering, and other impressive
effects both to samples and to realtime audio input. The SU200 is compact and easy to use,
and is great for capturing and using familiar and interesting sounds.
Reading this manually carefully will help you take full advantage of the SU200’s many
excellent features. After reading through the manual, please store it in a safe place
(together with the warranty) so that you can refer back to it again as needed.
Package Contents (Make sure all items are included.)
SU200
Sampling CD
Owner’s manual (this manual)
Using The Manual
SU200 Features
........................................................................................................................................ Page 6
Introduces the various SU200 features.
Contents
...................................................................................................................................................... Page 7
Supplying Power
...................................................................................................................................... Page 12
Explains how to connect up the power adaptor and how to install batteries.
SU200 Design
.......................................................................................................................................... Page 14
Explains the SU200’s configuration and controls.
Quick Start
..................................................................................................................................... Pages 16 to 21
A short tutorial that shows you what the SU200 can do.
Chapters 1 to 7
.............................................................................................................................. Pages 22 to 51
Detailed explanations and procedures for each of the SU200 features.
Troubleshooting
........................................................................................................................................ Page 54
Solutions to common problems. Check here before requesting service.
* Screen images and other illustrations in this manual are for explanatory purposes only, and may differ from actual
screen displays and machine states.
5
ENGLISH
What is Sampling?
The SU200 records sound from a microphone or from input from a CD player or similar audio device. This
recording process is called
sampling
, and the recorded sounds are called
samples
. You can record a sample
into each pad, and play the sample back by pressing the pad. The SU200 can store up to 24 samples (3 banks
×
8 pads) in its internal memory.
Samples are stored in digital form, just like recordings on an audio CD. The SU200 is capable of CD-quality
recording.
Various playback features
In addition to playing samples back exactly as recorded, the SU200 also offers various types of special play-
back.
• Play part or all of a sample repeatedly. (Loop play)............................................................................. Page 29
• Play a sample backwards. (Reverse play)............................................................................................. Page 29
• Select the part of the sample that plays back. (Start point/end point)............................................... Page 30
The following illustration shows how playback works when you have set up start and end points and selected
loop play.
Sample editing
The SU200 can delete the unplayed parts of your sample.
PHONES MIC INPUT MIDI IN
REC TRGLVLDATA
EFFECT
CONTROL
VOLUME
TYPE
TYPE
LFO
LO-FI
DELAY LEVEL
RESONANCE
VARI
GATE TIME
MOD SPEED
DRIVE
TIME
CUTOFF
3.3V
CARD
DC INLINE INPUT
L R
STEREO OUTPUT
L R
BANK
JOB EXIT
RESMPL
REC
BPM
NORMAL
REVERSE
START
POINT
END
POINT
POINT
CLEAR
START
STOP
SLICE
DELAY FILTER SCRATCH
SCALE
PAD
TIME STRETCH COPY PAD VOL SAVE DELETE MIDILOAD
CARD
TIME
DIST/
LO-FI
LOOP
REMIX
TECH
MOD
DELETE
EXTRACT
ONE SHOT
LOOP
GRADE
GATE
TRIGGER
STEREO/MONO
–1/NO
+
1/YES
BANK BANK
STANDBY
ON
1
2
SAMPLING UNIT
EFFECT TYPE
LOOP REMIX
SLICE
TECHMOD
DIST/LO-FI
DELAY
FILTER
8888888
~~~~~~
~~~~~
LOOP TR
PLAY
PAD PLAY Play PAD 1 8
LOOP TRACK PLAY
Select
EFFECT
LOOP REMIX Turn KNOB 1,2
Play PAD 1 8
Press LOOP TR PLAY Button
EFFECTS
under the knobs
Select
BANK A C
CD MD
Record samples.
“ABCDE”
Press pads to play samples back.
ABC D E
Start Point End Point
C D C D C D C D......
Sample
ABC D E
CD
Start Point End point
Extract
Sample Sample
6
SU200 Features
The SU200 provides more than just standard sampling. This page introduces you to some of the
special features included on the SU200.
Loop-Track Play: Play loop samples in unison, all at the same tempo (BPM)
(
Pages 18, 32)
Although each sample has its own tempo setting, you can use this feature to play out multiple
samples all at the same tempo. (You can also use an external MIDI clock to synchronize the play-
back.)
Powerful Effects and Filter (
Pages 17, 36)
Use the Loop Remix effect to rearrange break beats in real time. Or select from other dynamic
effects, or apply a filter. You can control the characteristics of each effect using the ribbon con-
troller and Effect Control knobs.
Clear User Interface
• The backlit display makes it easy to view your panel settings.
• Pads light up when pressed, so that you can easily see which pads are playing.
• Effect buttons ([DIST] to [FILTER]) and the [SCRATCH] button light up when pressed, so that
you can easily identify the effect that is currently selected.
Apply effects and filtering to realtime audio input (
Page 19)
Apply filtering or an effects (TECH MOD, DIST/LO-FI, or DELAY) to input from an external
audio source.
Includes resampling capability (
Page 26)
Mix multiple samples (together with effects, scratch, and filter) and record the result as a single
new sample.
Includes a memory-card slot (
Page 40)
Use a memory card (SmartMedia card) to save and load sample data or WAV files.
Allows simultaneous playback of samples recorded at different grades
You can record a sample in any of four grades (quality levels). This allows you to economize on
memory: use low grades for sounds that are not affected by the quality level, and use high grades
for sounds that require high resolution (cymbal sounds, etc.). You can play all of these samples
back at the same time.
Can operate on battery power
You can use the SU200 outdoors and in other locations where power connections are not avail-
able.
7
ENGLISH
Contents
Controls, Connectors, and the LCD .................................................................................................................... 8
Power connections ............................................................................................................................................ 12
The SU200 Design ............................................................................................................................................. 14
Quick Start ...........................................................................................................................16
Playing Samples ................................................................................................................................................ 16
Using the Effects and Filter .............................................................................................................................. 17
Using Loop-Track Play ...................................................................................................................................... 18
Applying Effects or Filter to Realtime Audio Input ......................................................................................... 19
Recording a Sample .......................................................................................................................................... 20
Chapter 1 Recording Samples .............................................................................................22
Recording a Sample (AUTO start) .................................................................................................................... 22
Recording a Sample (MANUAL start) ............................................................................................................... 24
Resampling ........................................................................................................................................................ 26
Chapter 2 Playing the Pads .................................................................................................28
Gate/Trigger Setting ......................................................................................................................................... 28
One-shot/Loop Setting...................................................................................................................................... 29
Normal/Reverse Setting .................................................................................................................................... 29
Setting the Start Point and End Point ............................................................................................................. 30
Using the [HOLD] Feature ................................................................................................................................ 32
Loop-Track Play ................................................................................................................................................. 32
Chapter 3 Sample Editing ....................................................................................................34
DELETE (Deleting an Entire Sample) ............................................................................................................. 34
EXTRACT (Deleting The Unused Ends of a Sample) ....................................................................................... 35
Chapter 4 Effects .................................................................................................................36
Selecting the Pad that Receives the Effect or Filter ........................................................................................ 36
Effects, Filter, and Scratch ............................................................................................................................... 36
Chapter 5 MIDI Features .....................................................................................................38
About MIDI......................................................................................................................................................... 38
Setting the MIDI Clock and MIDI Channel ...................................................................................................... 39
Chapter 6 Using Memory Cards ..........................................................................................40
Saving Data into a Memory Card...................................................................................................................... 42
Loading Data from a Memory Card .................................................................................................................. 44
Deleting Data from a Memory Card ................................................................................................................. 46
Formatting a Memory Card .............................................................................................................................. 47
Chapter 7 Other Useful Features .........................................................................................48
Scale Play .......................................................................................................................................................... 48
Time Stretch (Changing a Sample’s Length) ................................................................................................... 49
Copying a Sample into Another Pad ................................................................................................................ 50
Adjusting the Playback Volume for Each Pad .................................................................................................. 50
Using Memory Protection to Prevent Accidental Deletion .............................................................................. 51
Reference ............................................................................................................................52
Displayed Messages ........................................................................................................................................... 52
Troubleshooting ................................................................................................................................................ 54
Specifications .................................................................................................................................................... 55
Index .................................................................................................................................................................. 56
MIDI Implementation Chart ............................................................................................................................. 60
8
Controls, Connectors, and the LCD
PHONES MIC INPUT MIDI IN
REC TRGLVLDATA
EFFECT
CONTROL
VOLUME
TYPE
TYPE
LFO
LO-FI
DELAY LEVEL
RESONANCE
VARI
GAT E TIME
MOD SPEED
DRIVE
TIME
CUTOFF
3.3V
CARD
DC INLINE INPUT
L R
STEREO OUTPUT
L R
BANK
JOB EXIT
RESMPL
REC
BPM
NORMAL
REVERSE
START
POINT
END
POINT
POINT
CLEAR
START
STOP
SLICE
DELAY FILTER SCRATCH
SCALE
PAD
TIME STRETCH COPY PAD VOL SAVE DELETE MIDILOAD
CARD
TIME
DIST/
LO-FI
LOOP
REMIX
TECH
MOD
DELETE
EXTRACT
ONE SHOT
LOOP
GRADE
GATE
TRIGGER
STEREO/MONO
–1/NO
+
1/YES
BANK BANK
STANDBY
ON
1
2
SAMPLING UNIT
EFFECT TYPE
LOOP REMIX
SLICE
TECHMOD
DIST/LO-FI
DELAY
FILTER
8888888
~~~~~~
~~~~~
LOOP TR
PLAY
q
w
e
r
t
!1
!5
!6
@0
@4 @5 @6
!7 !8 !9
@7
@8 @9
#1
#0
@1 @2 @3
!3!2 !4
y u
i
o
!0
Front Panel
Controls, Connectors, and the LCD
Controls, Connectors, and the LCD
9
ENGLISH
q
Liquid Crystal Display (LCD)
...................................................................................................................... Page11
w
VOLUME Control Knob
................................................................................................................... Page 13
e
EFFECT CONTROL Knobs 1 and 2
............................................................................................. Page 17
r
Ribbon Controller
............................................................................................................................. Page 17
t
[LOOP REMIX] Button
..............................................................................................................Pages 17, 36
y
[SLICE] Button
...........................................................................................................................Pages 17, 36
u [TECH MOD] Button .................................................................................................................Pages 17, 36
i [DIST/LO-FI] Button..................................................................................................................Pages 17, 36
o [DELAY] Button..........................................................................................................................Pages 17, 36
!0 [FILTER] Button .........................................................................................................................Pages 17, 36
!1 [SCRATCH] Button....................................................................................................................Pages 17, 36
!2 [JOB] Button...................................................................................................................Pages 15, 39, 42, 48
!3 [EXIT] Button..................................................................................................................................... Page 15
!4 [-1/NO], [+1/YES] Buttons........................................................................................................Pages 18, 22
!5 Bank buttons (Banks A, B, C)......................................................................................................... Page 16
!6 [LOOP TR PLAY] Button ..........................................................................................................Pages 18, 32
!7 [RSMPLE] Button............................................................................................................................. Page 26
!8 [REC] Button........................................................................................................................Pages 20, 22, 24
!9 [START/STOP] Button ..................................................................................................Pages 21, 23, 25, 26
@0 [HOLD] Button................................................................................................................................... Page 32
@1 [GATE/TRIGGER] Button................................................................................................................ Page 28
@2 [ONE SHOT/LOOP] Button............................................................................................................. Page 29
@3 [NORMAL/REVERSE] Button........................................................................................................ Page 29
@4 [START POINT] Button.............................................................................................................Pages 30, 31
@5 [END POINT] Button.................................................................................................................Pages 30, 31
@6 [POINT CLEAR] Button................................................................................................................... Page 31
@7 [DELETE/EXTRACT] Button...................................................................................................Pages 34, 35
@8 [TIME] Button.............................................................................................................................Pages 17, 37
@9 [TAP] button....................................................................................................................................... Page 37
#0 Pads 1 to 8......................................................................................................................................... Page 16
#1 [AUDIO IN] Button............................................................................................................................ Page 19
10
Controls, Connectors, and the LCD
Rear Panel and Connections
q STANDBY/ON Switch................................................................................................................................. Page 13
Press to toggle the power on or off. (Power is on when the switch is pressed in.)
w DC IN Power Input
Connects to the optional PA-3B power adaptor.
e MIDI IN Connector...................................................................................................................................... Page 38
Connects to external MIDI device (electronic instrument or computer). Allows you to control SU200 opera-
tion from the external device.
r Card Slot....................................................................................................................................................... Page 40
Accepts insertion of a memory card. You use memory cards to save and load samples.
t STEREO OUTPUT Jacks (R, L)
The SU200’s audio outputs. As the SU200 does not include an internal amp or speakers, you need to connect
these outputs to an external audio device in order to play out the sound.
y LINE INPUT Jacks (R, L)
Inputs an audio signal for sampling or for AUDIO IN throughput. Connects to output cables from an external
device such as a CD player or mixer.
u MIC INPUT Jack
Connects to a dynamic microphone or a battery-powered condenser microphone.
i PHONES Jack
Connects to a headphone set. (Use the VOLUME knob to control the volume to the headphones.)
Don’t leave the headphone volume set too high. Prolonged listening at high volume may
cause ear damage.
PHONES
MIC INPUT
MIDI IN
3.3V
CARD
DC IN
LINE INPUT
R L
STEREO OUTPUT
R L
STANDBY
ON
q
ew r
t y
u i
CD
External Sequencer
(RM1x, etc.)
MD
CAUTION
Controls, Connectors, and the LCD
11
ENGLISH
Display
q STEREO/MONO............................................................................................................................Pages 22, 24, 26
w HI/STD/LONG/EXLG
..................................................................................................................................Pages 22, 24
Indicates the currently selected sampling grade. You can change the selection using the [GRADE] button.
Higher grades offer better quality but require more memory. Total available sampling time for each grade
(with the SU200 set to MONO) are as follows.
HI.............................................. Up to 42 seconds. Offers high-quality sampling, roughly equivalent to that of a
standard CD.
STD (standard)......................... Up to 83 seconds.
LONG........................................ Up to 166 seconds.
EXLG (extra long) .................... Up to 333 seconds.
e MIC/LINE...................................................................................................................................................... Page 22
Indicates the source from which the SU200 receives audio input for recording or throughput. The display
changes automatically depending on whether a microphone or LINE input is connected.
MIC ........................................... The SU200 takes audio input from the microphone connected to the MIC INPUT
jack. Automatically selected if a microphone is connected. (The SU200 does not
recognize LINE input while a microphone is connected.)
LINE ......................................... The SU200 takes input from the audio device (CD player, etc.) connected to one or
both of the LINE INPUT jacks.
r GATE/TRG................................................................................................................................................... Page 28
t ONESHOT/LOOP ....................................................................................................................................... Page 29
y NORMAL/REVERSE.................................................................................................................................. Page 29
u
Beat display
During loop-track play (see page 18), the display flashes to indicate the current beat (12341...). The
beat advances according to the tempo (BPM).
i REC TRGLVL (Recording Trigger Level) ................................................................................................... Page 23
o INPUT ....................................................................................................................................................Pages 22, 24
!0 MANUAL/AUTO/RESMPL/MIDI, REC
MANUAL................................... Page 24
AUTO........................................ Page 22
RESMPL (Resample) ............... Page 26
MIDI ......................................... Page 33
!1
Menu/Message Display
!2
Numerical Display
8888888
~~~~~~
~~~~~
q
r
u
!1
w
t
e
y
i
o
!0
!2
12
Power connections
Power connections
While the SU200 can run from either an optional AC adaptor or batteries, Yamaha recommends use
of the more environmentally safe AC adaptor. Follow the instructions below according to the power
source you intend to use.
Using an Optional AC Power Adaptor
Z Make sure that the SU200’s STANDBY/ON switch is set to STANDBY.
X Connect the optional AC adaptor (PA-3B or other adaptor specifically recommended by
Yamaha) to the power supply jack.
C Plug the AC adaptor into an AC outlet.
To disconnect the adaptor: Set the STANDBY/ON switch to STANDBY, then unplug the adaptor from the
AC outlet, and then disconnect it from the SU200 power supply jack.
Use ONLY a Yamaha PA-3B AC Power Adaptor (or other adaptor specifically recom-
mended by Yamaha) to power your instrument from a standard electrical outlet. The use
of other adaptors may result in irreparable damage to both the adaptor and the SU200.
Unplug the AC Power Adaptor when not using the SU200, or during electrical storms.
Using Batteries
Z Open the battery compartment cover located on the instrumentís bottom panel.
X Insert six new batteries, being careful to follow the polarity markings on the inside of the
compartment.
C Replace the compartment cover, making sure that it locks firmly in place.
AC outlet
PA-3B
DC IN
STANDBY
ON
X
C
WARNIN
G
Power connections
13
ENGLISH
When the batteries need to be replaced, “Battry Low” may appear on the display, the volume
may be reduced, the sound may be distorted, and other problems may occur. When this hap-
pens, turn the power off and replace the batteries.
Even if batteries are installed, the SU200 will automatically switch to AC power when the AC
adaptor is connected.
• To conserve battery life, the display’s backlight remains off when the SU200 is running on
batteries.
When the batteries run down, replace them with a complete set of six new batteries.
NEVER mix old and new batteries.
Do not use different kinds of batteries (e.g. alkaline and manganese) at the same time.
If the instrument is not to be in use for a long time, remove the batteries from it, in order
to prevent possible leakage of battery fluid.
Switching On the Power
Z
Make the necessary connections.
Connect up headphones or an output audio device. (See page 10.)
X
Lower the volume settings on the SU200 and the audio device.
C
Press the STANDBY/ON switch to set the power ON.
The SU200 displays
YAMAHA SU200
and then enters Pad-Play mode (see page 15).
Note that a samll amout of current continues to flow even while the switch is in the
STANDBY position. If you are going to leave the SU200 unused for a prolonged period,
be sure to disconnect the adaptor and (if batteries are installed) remove the batteries.
V
Adjust the volume by turning the VOLUME knob.
Also adjust the volume at the external audio device.
B
When you are ready to turn off the SU200: Switch off the power to the output audio device
(or lower its volume) before switching off the SU200.
NOTE
CAUTION
STANDBY
ON
CAUTION
VOLUME
14
The SU200 Design
The SU200 Design
Internal Configuration
The SU200 consists of three internal blocks.
Sampler Block
Records samples from sound input from a microphone, CD player, or other audio device, and allows
editing and processing of the recorded samples.
Effector/Filter Block
Applies an effect or filter to the sound output from the sampler block. The SU200 provides six effect
types: some of them standard effects, and others newly designed specifically for use with sample play-
back.
Controller Section
Provides the various controls used for realtime playback. Includes pads for playing samples, and the rib-
bon controller and Effect Control knobs for applying effects.
BANK BANK BANK
LOOP TR
PLAY
EFFECT
CONTROL
1
2
CD MD
Sampler Block
Sample Recording
Controller Block
Effector/Filter
Block
Loop-Track
Play
The SU200 Design
15
ENGLISH
Memory Configuration
The SU200 can store a maximum of 24 samples (8 pads × 3 banks) in its internal memory. You can
also save your SU200 samples into memory cards (see page 42).
Modes
The SU200 has three main operating modes.
Pad-Play Mode
The SU200 enters this mode immediately following power-on. This is the mode you use to play and edit
your samples. All operating procedures presented in this manual assume that you are starting from
Pad-Play mode.
Sampling Mode
This is the mode you use to record samples. You enter this mode by pressing the [REC] button, so that
the REC indication appears in the display.
Job Mode
You use this mode to make various settings: pad settings, memory-card settings, and so on. You enter
this mode by pressing the [JOB] button.
If you lose track of the current mode when working at the panel, you can return to Pad-Play
mode by pressing the [EXIT] button one or more times (depending on the mode you are cur-
rently in).
Bank B
Bank A
Bank C
Sample
Gate/Trigger.....................................................Page 28
Oneshot/Loop..................................................Page 29
Normal/Reverse...............................................Page 29
Start and end points........................................Page 30
Memory Card
NOTE
16
Quick Start
Quick Start
Playing Samples
The SU200 comes with samples recorded for all pads. You are now ready to start using the pads to
play these prerecorded samples.
Z
Make the necessary connections.
Connect up headphones or an output audio device. (See page 10.)
X
Press the [STANDBY/ON] switch on the SU200’s rear panel.
The SU200 displays
YAMAHA SU200
and then enters Pad-play mode.
You can turn the power off by pressing the switch a second time.
Even when the switch is in the “STANDBY” position, electricity is still flowing to the
instrument at the minimum level. When you are not using the SU200 for a long time,
make sure you unplug the AC power adaptor from the wall AC outlet, and/or remove the
batteries from the instrument.
C
Pressing each pad plays a different sample.
For example, try pressing and holding pad 1.
Notice that the pad lights up and that a drum rhythm pattern repeats (loops) as long as the pad is held
down. The playback stops when the pad is released.
Next, try pressing pad 8.
The pad lights up and you hear a cymbals sample, which plays once through and then stops.
Notice that pad 1 is set for
loop
play: it continues to play the sample repeatedly as long as it is held
down. Pad 8 is set for
one-shot
play: it plays the sample once through only. You are free to set each pad
to play either loop or one-shot, and you can change the setting any time you wish. (See page 29.)
• The SU200 provides eight pads and three banks,
allowing you to store and play up to 24 samples.
(Switching the bank changes you to a whole dif-
ferent set of samples.) In the examples given here
we are using bank A.
The SU200 can play a maximum of 6 standard (or
lower) grade monaural samples at one time, or up
to 2 high-grade samples at one time. The maxi-
mum number may decline, however, when using
the scratch or time stretch.
STANDBY
ON
CAUTION
BANK BANK BANK
NOTE
Quick Start
17
ENGLISH
Using the Effects and Filter
The SU200 lets you to apply a variety of impressive effects to your samples. Now let's try using the
EFFECT CONTROL knobs and the ribbon controller on the SU200's front panel.
Effects and scratch to not operate during playback of high-grade samples.
The lower right of the display indicates the pad that was most recently pressed. The effect you
choose will apply to the sample in this pad.
When the [SCRATCH] button is off, the ribbon controller operates in the same way as
EFFECT CONTROL knob 2.
EFFECT
Control the effect by turning the EFFECT CONTROL knobs.
SCRATCH
Use the ribbon controller to produce a scratch sound.
NOTE
TIME
REC TRGLVLDATA
EFFECT
CONTROL
VOLUME
TYPE
TYPE
LFO
LO-FI
DELAY LEVEL
RESONANCE
VARI
GAT E TIME
MOD SPEED
DRIVE
TIME
CUTOFF
1
2
EFFECT TYPE
LOOP REMIX
SLICE
TECHMOD
DIST/LO-FI
DELAY
FILTER
SLICE
DELAY FILTER
DIST/
LO-FI
LOOP
REMIX
TECH
MOD
A-3
z Press a pad.
x Switch on the effect you wish to apply.
c Turn the EFFECT CONTROL knobs to
adjust the effect's parameters.
Example: Press the [FILTER] button
once to set the filter on.
You can then use
EFFECT CONTROL
knob 1 to control the fil-
ter’s resonance, and knob
2 to control the filter’s cut-
off frequency. You can
switch the filter off by
pressing the [FILTER] but-
ton a second time.
Cuts the sound into discrete,
intermittent slices.
Applies distinctive modulation
and metallic tonality.
Breaks the sample
into pieces and
rearranges these to
build a new phrase.
Applies distortion and
reduces the fidelity.
Applies a delay accord-
ing to the sample’s
tempo (BPM).
Strong filtering with
resonance.
Allows you to change the
tempo in real time.
Page 37
NOTE
SCRATCH
z Play a pad.
c You can now scratch out the
sample you selected (in this
case, the sample for pad 3) by
rubbing your finger along the
ribbon controller.
v You can switch off scratch
operation by pressing the
[SCRATCH] button once
again.
x Press the [SCRATCH] button.
Assign a pad to the [SCRATCH] button.
You can use t
h
e r
ibb
on contro
ll
er to scratc
h
out a selected sample. This gives you a sound
similar to what a DJ gets by manually turning
a vinyl disc.
NOTE
18
Quick Start
Using Loop-Track Play
Use this feature to play loop samples from multiple pads simultaneously. The SU200 temporarily
adjusts the tempo settings for each sample so that all of these samples play out at the same tempo
(the same BPM setting).
Some samples may produce noise when used with Loop Track Play.
Z
Press the [LOOP TR PLAY] (“Loop Track Play”) button.
Pads currently set for loop playback all begin playing in an endless loop. This operation is referred to as
Loop-Track Play
.
X
Press one of the pads that is currently playing (that is currently lit up).
The pad goes dark, and the sample goes off. (The sample is muted.)
Press the pad again, and sample’s playback resumes.
(During Loop-Track Play, the pads for your loop sample act in the same way as mixer MUTE buttons.)
C
Tap three or four times.
V
Try pressing a pad for a non-looping sample (a pad set for one-shot playback).
Pads set for one-shot playback are not affected by loop-track play. You can play these pads in the same
way as usual: press the pad once to play the sample.
B
Press the [LOOP TR PLAY] button again to stop sample playback.
NOTE
LOOP TR
PLAY
LoopTr
132
When you set this button on, all samples currently set for loop playback
begin playing out continuously, and the corresponding pads light up. All
samples currently set to one-shot play remain off, and their pads remain
dark. (See page 29.)
BPM
–1/NO
+
1/YES
LoopTr
120
or
Tap three or four times.
LOOP TR
PLAY
Now that you have switched off loop-track play, try pressing pads 1, 2, 3, 4, and 5 one at a time. Notice
that these pads are all set to different tempos. During loop-track play, the SU200 automatically syn-
chronizes the playback so that they all play out at the same tempo.
Note that it is also possible to synchronize sample playback using an external MIDI clock. To use these
feature, you need to set the SU200 for an external MIDI clock (using Job mode) and you need to con-
nect a MIDI clock device to the SU200’s MIDI IN connector.
Quick Start
19
ENGLISH
Applying Effects or Filter to Realtime Audio Input
The “Audio In” feature lets you pass sound from a CD player, MD player, or other audio device
through the SU200. You can switch the sound throughput on and off, and mix it with playback from
sample pads 1 to 8. You are also free to apply an effect or filter to the sound as it passes through the
SU200.
Z
Make the necessary connections.
Switch off the SU200 and connect up a CD player or other audio source device. Also connect up an
audio output device such as powered speakers or headphones. (See page 10.)
X
Switch on the power to the audio devices and to the SU200.
C
Start playback from the audio input device, and the press the AUDIO IN pad on the
SU200.
V
Try using the EFFECT CONTROL knobs and ribbon controller to control the effect
applied to the sound as it passes through the SU200.
Use the knobs and ribbon controller in the same way as described on page 17 (the same way you use
them with pads 1 to 8).
Loop Remix, Slice, scratch, and realtime tempo change ([TIME]) do not work on audio input.
Remember that effects do not operate during playback of high-grade samples
PHONES MIC INPUT MIDI IN
REC TRGLVLDATA
EFFECT
CONTROL
VOLUME
TYPE
TYPE
LFO
LO-FI
DELAY LEVEL
RESONANCE
VARI
GATE TIME
MOD SPEED
DRIVE
TIME
CUTOFF
3.3V
CARD
DC INLINE INPUT
L R
STEREO OUTPUT
L R
BANK
JOB EXIT
RESMPL
REC
BPM
NORMAL
REVERSE
START
POINT
END
POINT
POINT
CLEAR
START
STOP
SLICE
DELAY FILTER SCRATCH
SCALE
PAD
TIME STRETCH COPY PAD VOL SAVE DELETE MIDILOAD
CARD
TIME
DIST/
LO-FI
LOOP
REMIX
TECH
MOD
DELETE
EXTRACT
ONE SHOT
LOOP
GRADE
GATE
TRIGGER
STEREO/MONO
–1/NO
+
1/YES
BANK BANK
STANDBY
ON
1
2
SAMPLING UNIT
EFFECT TYPE
LOOP REMIX
SLICE
TECHMOD
DIST/LO-FI
DELAY
FILTER
8888888
~~~~~~
~~~~~
LOOP TR
PLAY
PAD PLAY Play PAD 1 8
LOOP TRACK PLAY
Select
EFFECT LOOP REMIX Turn KNOB 1,2
Play PAD 1 8
Press LOOP TR PLAY Button
EFFECTS
under the knobs
Select
BANK A C
PHONES MIC INPUT MIDI IN
REC TRGLVLDATA
EFFECT
CONTROL
VOLUME
TYPE
TYPE
LFO
LO-FI
DELAY LEVEL
RESONANCE
VARI
GATE TIME
MOD SPEED
DRIVE
TIME
CUTOFF
3.3V
CARD
DC INLINE INPUT
L R
STEREO OUTPUT
L R
BANK
JOB EXIT
RESMPL
REC
BPM
NORMAL
REVERSE
START
POINT
END
POINT
POINT
CLEAR
START
STOP
SLICE
DELAY FILTER SCRATCH
SCALE
PAD
TIME STRETCH COPY PAD VOL SAVE DELETE MIDILOAD
CARD
TIME
DIST/
LO-FI
LOOP
REMIX
TECH
MOD
DELETE
EXTRACT
ONE SHOT
LOOP
GRADE
GATE
TRIGGER
STEREO/MONO
–1/NO
+
1/YES
BANK BANK
STANDBY
ON
1
2
SAMPLING UNIT
EFFECT TYPE
LOOP REMIX
SLICE
TECHMOD
DIST/LO-FI
DELAY
FILTER
8888888
~~~~~~
~~~~~
LOOP TR
PLAY
PAD PLAY Play PAD 1 8
LOOP TRACK PLAY
Select
EFFECT LOOP REMIX Turn KNOB 1,2
Play PAD 1 8
Press LOOP TR PLAY Button
EFFECTS
under the knobs
Select
BANK A C
Audio Input
(Source sound)
Sound from the audio source passes through the SU200
and out to the speakers.
You can stop the sound throughput by pressing the AUDIO
IN pad once again. (Each press toggles throughput on or
off.)
Audio Input
(Source sound)
REC TRGLVLDATA
EFFECT
CONTROL
1
2
NOTE
20
Quick Start
Recording a Sample
Now try taking a sample of your own voice, and then playing it back by pressing the pad.
Z
Connect a microphone to the MIC INPUT jack. (See page 10.)
X
Switch memory protection off. (See page 51.)
C Switch off all pads, and then press the [REC] button to enter Sampling mode.
You can escape from Sampling mode by pressing the [EXIT] button.
V Press the pad into which you want to record your new sample.
If a sample is already recorded on the pad you select, the display asks whether to delete (over-
write) it. The message takes the form Delete B-1?, where the letter indicates the selected
bank (A, B, or C) and the number indicates the selected pad (1 to 8). Press [+1/YES] to delete
the existing sample and continue with recording, or press [-1/NO] to cancel and retain the
existing sample.
PHONES
MIC INPUT
REC
Which 
Pad?
NOTE
BANK
RESMPL REC
NORMAL
REVERSE
START
POINT
END
POIN
T
ONE SHOT
LOOP
GRADE
GATE
TRIGGER
STEREO/MONO
BANK BANK
LOOP TR
PLAY
Press
Start
NOTE
1 / 1

Yamaha SU200 Instrukcja obsługi

Kategoria
Instrumenty muzyczne
Typ
Instrukcja obsługi