Thrustmaster 4060069 Instrukcja obsługi

Europe, Middle East

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ITALIANO

ESPAÑOL

PORTUGUÊS

РУССКИЙ

ČESTINA

TÜRKÇE

POLSKI

SVENSKA

SUOMI

SLOVENCINA

MAGYAR NYELV

תירבע

ﺔﻴﺑﺮﻌﻟا

North America/

Norteamérica

ENGLISH

FRANÇAIS

ESPAÑOL

Latin America/

América Latina

ENGLISH

ESPAÑOL

PORTUGUÊS

Asia Pacic

日本語

简体中文

繁體中文

ENGLISH

1/28

For PlayStation®5 consoles, PlayStation®4 consoles and PC

User Manual

WARNING:

To ensure that your T300 racing wheel functions correctly with games,

you may be required to install the game’s automatic updates

(available when your console is connected to the Internet).

2/28

TECHNICAL FEATURES

1 T300 RS base

2 T300 GT wheel

3 2 sequential paddle shifters (up & down)

4 Directional buttons

5 Built-in USB sliding switch for PS5™ consoles,

PS4™ consoles and PC

6 MODE button + red/orange/green indicator

light

7 SHARE/OPTIONS buttons on PS4™

consoles and CREATE/OPTIONS on

PS5™ consoles

8 PS button

9 Large threaded hole (for attachment system

and fastening screw)

10 Attachment system

11 Metal fastening screw

Important notes regarding the USB sliding switch (5):

- In order to function on a PS5™ console or PS4™ console, the USB sliding switch (5) on the

racing wheel’s base must always be in the PS5™-PS4™ position before connecting the racing

wheel’s USB cable to the console.

- In order to function on a PS3™ console, the USB sliding switch (5) on the racing wheel’s base

must always be in the PC position before connecting the racing wheel’s USB cable to the console.

- In order to function on PC, the USB sliding switch (5) on the racing wheel’s base must always be in

the PC position before connecting the racing wheel’s USB cable to the PC.

3/28

12 Thrustmaster Quick Release

13 L3/R3 buttons

14 Power supply connector (type A or B)

(varies from one country to another)

15 Racing wheel USB cable and connector

16 Gearbox connector

(gearbox sold separately)

17 Pedal set connector

4/28

PLUGGING THE RACING WHEEL INTO AN ELECTRICAL OUTLET:

PLEASE READ BEFORE PROCEEDING!

Your racing wheel’s power supply varies according to the country where you purchased your device.

The power supply can be:

Internal, with:

* a power supply unit located directly inside the racing wheel’s base, with a type A

connector.

* a 220-240 V power supply cable.

= compatible only with 220-240 V electrical power.

Never connect the 220-240 V cable

to a 100-130 V electrical outlet!!!

Never connect this cable to a power adapter!!!

Internal, with:

* a power supply unit located directly inside the racing wheel’s base, with a type A

connector.

* a 100-125 V power supply cable.

= compatible only with 100-125 V electrical power.

Never connect the 100-125 V cable

to a 220-240 V electrical outlet!!!

Never connect this cable to a power adapter!!!

IMPORTANT: if you do not know which voltage is supplied in the area in which you are using

your racing wheel, please ask your local electricity supplier.

External, with:

* an external power supply unit, with a type B connector.

* a power supply cable.

= compatible with all electrical voltages, from 110-240 V.

5/28

WARNING

Before using this product, please read this manual carefully and save it for later reference.

Warning – Electrical shock

* Keep the product in a dry location and do not expose it to dust or sunlight.

* Do not twist or pull on the connectors and cables.

* Do not spill any liquid on the product or its connectors.

* Do not short-circuit the product.

* Never dismantle the product; do not throw it onto a fire and do not expose it to high temperatures.

* Do not use a power supply cable other than the one provided with your racing wheel.

* Do not use the power supply cable if the cable or its connectors are damaged, split or broken.

* Make sure that the power supply cable is properly plugged into an electrical outlet, and properly

connected to the connector at the rear of the racing wheel’s base.

* Do not open up the racing wheel: there are no user-serviceable parts inside. Any repairs must be

carried out by the manufacturer, its authorized representative or a qualified technician.

* Only use attachment systems/accessories specified by the manufacturer.

* If the racing wheel is operating abnormally (if it is emitting any abnormal sounds, heat or odors), stop

using it immediately, unplug the power supply cable from the electrical outlet and disconnect the other

cables.

* If you will not be using the racing wheel for an extended period of time, unplug its power supply cable

from the electrical outlet.

* The power outlet shall be installed near the equipment and shall be easily accessible.

Air vents

Make sure not to block any of the air vents on the racing wheel’s base. For optimal ventilation, make sure

to do the following:

* Position the wheel’s base at least 10 cm away from any wall surfaces.

* Do not place the base in any tight spaces.

* Do not cover the base.

* Do not let any dust build up on the air vents.

For safety reasons, never use the pedal set with bare feet

or while wearing only socks on your feet.

THRUSTMASTER® DISCLAIMS ALL RESPONSIBILITY IN THE EVENT OF

INJURY RESULTING FROM USE OF THE PEDAL SET WITHOUT SHOES.

Warning – Injuries due to Force Feedback and repeated movements

Playing with a Force Feedback racing wheel may cause muscle or joint pain. To avoid any problems:

* Avoid lengthy gaming periods.

* Take 10 to 15 minute breaks after each hour of play.

* If you feel any fatigue or pain in your hands, wrists, arms, feet or legs, stop playing and rest for a few

hours before you start playing again.

6/28

Warning – Injuries due to Force Feedback and repeated movements (continued)

* If the symptoms or pain indicated persist when you start playing again, stop playing and consult your

doctor.

* Keep out of children’s reach.

* During gameplay, always leave both hands correctly positioned on the wheel without completely

letting go.

* During gameplay, never place your hands or your fingers under the pedals or anywhere near the

pedal set.

* During calibration and gameplay, never place your hand or your arm through the openings in the

racing wheel.

* Make sure that the racing wheel’s base is properly secured, as per this manual’s instructions.

Product to be handled only by users

16 years of age or older

HEAVY PRODUCT

Be careful not to drop the product on

yourself or on anyone else!

ALWAYS NEVER NEVER

7/28

Warning – Pedal set pinch hazard when playing

* Keep the pedal set out of children’s reach.

* During gameplay, never place your fingers on or anywhere near the sides of the pedals.

* During gameplay, never place your fingers on or anywhere near the pedal’s rear base.

* During gameplay, never place your fingers on or anywhere near the pedal’s front base.

NEVER NEVER NEVER

Warning – Pedal set pinch hazard when not playing

* Store the pedal set in a safe place, and keep it out of children’s reach.

8/28

UPDATING YOUR RACING WHEEL’S FIRMWARE

The firmware included in your racing wheel’s base can be updated to a more recent version featuring

product enhancements.

To display the firmware version that your racing wheel is currently using and update it if required: on

PC, visit https://support.thrustmaster.com. Click Racing Wheels / T300RS GT Edition, then select

Firmware and follow the instructions describing the download and installation procedure.

Important note:

In order to function on PC, the USB sliding switch (5) on the racing wheel’s base must always be

in the PC position before connecting the racing wheel’s USB cable to the PC.

9/28

INSTALLING THE WHEEL ON ITS BASE

Align the connector positions using the arrows:

Base (1) connector: Arrow pointing upwards

Racing wheel (2) connector: Arrow pointing upwards

Once the connectors are correctly positioned, simply rotate the Thrustmaster Quick Release (12) device’s

ring anticlockwise, while holding the racing wheel (2) in position.

Then, tighten the ring as much as you can: to do so, hold the ring in position and rotate the racing wheel

clockwise.

Once you have installed the wheel, rotate it 180° (when facing the wheel, the GT logo should be upside

down) to access the small attachment screw located on the ring of the Thrustmaster Quick Release (12)

device. Use a large Phillips screwdriver to tighten the small attachment screw (do not use excessive

force), turning it clockwise.

When using a Philips screwdriver, ensure NOT to use excessive force

when tightening the small attachment screw!

Stop turning the screw as soon as you feel some resistance.

10/28

ATTACHING THE RACING WHEEL

Attaching the racing wheel to a table or a desktop

1. Place the racing wheel on a table or any other horizontal, flat and stable surface.

2. Insert the fastening screw (11) in the attachment system (10), then tighten the device by turning

the screw anticlockwise, so that it feeds into the large threaded hole (9) located beneath the

racing wheel, until the wheel is perfectly stable.

WARNING: Never tighten the screw alone, without the attachment system in place!

(This could damage the racing wheel.)

Attaching the racing wheel’s base to a cockpit

1. Place the racing wheel’s base on the cockpit shelf.

2. Drive two M6 screws (not included) through the cockpit shelf, then feed them into the two small

screw threads located on the underside of the racing wheel.

Important: The length of the two M6 screws must not exceed the thickness of the shelf + 12 mm;

longer screws could cause damage to internal components located in the racing wheel’s base.

3. If required, tighten the standard attachment system by inserting the fastening screw in the large

threaded hole.

11/28

ATTACHMENT /

REMOVAL

DIRECTION

To tighten:

Turn the screw

counterclockwise

To release:

Turn the screw

clockwise

12/28

MAPPING FOR PLAYSTATION®5 CONSOLES AND PLAYSTATION®4

CONSOLES

MAPPING FOR PC

13/28

SETTING UP THE RACING WHEEL FOR PLAYSTATION®5 CONSOLES AND

PLAYSTATION®4 CONSOLES

1. Connect the pedal set to the connector (17) located at the back of the racing wheel's base.

2. Connect the power supply cable to the connector (14) located at the back of the racing wheel's

base.

3. Plug the power supply cable into an electrical outlet with the same voltage specifications.

For more information about this, please refer to the PLUGGING THE RACING

WHEEL INTO AN ELECTRICAL OUTLET section, on page 4 of this manual.

4. Set the USB sliding switch (5) on the racing wheel’s base to PS5™-PS4™.

5. Connect the racing wheel’s USB connector (15) to one of the console’s USB ports.

6. Once your console is powered on, your racing wheel will calibrate itself automatically.

7. Press the racing wheel’s PS button (8) and sign in to your PlayStation®Network account, in order to

be able to use the wheel.

You are now ready to play!

14/28

SWITCHING FROM PS5™ MODE TO PS4™ MODE AND VICE VERSA

Press and hold down the MODE button (6) for five seconds, and then release it.

The indicator light changes color, and the selection you have made is instantly saved in the racing

wheel’s internal memory.

SELECTED MODE

Color of indicator light (6)

PS5™

RED

PS4™

ORANGE

Important notes:

- The USB sliding switch (5) on the racing wheel’s base must always be set to the proper

position (PS5™-PS4™) before connecting the wheel’s USB cable to the console.

To change the sliding switch’s position, disconnect the USB cable from the console and then

change the position of the switch before reconnecting the USB cable to the console.

- On PlayStation®5 consoles and PlayStation®4 consoles, with the USB sliding switch (5) in the

PS5™-PS4™ position:

* Don't forget to press the racing wheel’s PS button (8) in order to be able to use the wheel.

* The wheel is recognized in most games as a T300 RS wheel.

* The wheel is functional in compatible games and in console menus.

* The “CREATE/SHARE” and “PS” functions are functional on the wheel.

- The list of games compatible with the PS5™ console and the PS4™ console is available at:

https://support.thrustmaster.com (click Racing Wheels / T300RS GT Edition / Games settings).

This list is updated regularly.

15/28

SETTING UP THE RACING WHEEL FOR PC*

*PC compatibility not endorsed by Sony Interactive Entertainment.

1. Connect the pedal set to the connector (17) located at the back of the racing wheel’s base.

2. Connect the power supply cable to the connector (14) located at the back of the racing wheel’s

base.

3. Plug the power supply cable into an electrical outlet with the same voltage specifications.

For more information about this, please refer to the PLUGGING THE RACING

WHEEL INTO AN ELECTRICAL OUTLET section, on page 4 of this manual.

4. Set the USB sliding switch (5) on the racing wheel’s base to PC.

5. Go to https://support.thrustmaster.com, then select Racing Wheels / T300RS GT Edition to

download the drivers and the Force Feedback software for PC.

6. Once the download is complete, launch the installation, and follow the on-screen instructions to

connect the wheel’s USB plug to your PC and complete the installation. The racing wheel

automatically self-calibrates. The indicator light (6) is green.

7. Once the installation is complete, click Finish and restart your computer.

8. Select Start / All Programs / Thrustmaster / T300RS GT Edition / Control Panel to open the

Game Controllers window.

The Game Controllers window displays the racing wheel’s name (Thrustmaster T300RS Racing

Wheel) with the status OK.

9. Click Properties to configure your wheel in the T300 control panel:

• Test Input tab: lets you test and view the action buttons, directional buttons, wheel and pedals

axes, and adjust the wheel’s rotation angle in your PC games.

• Test Forces tab: lets you test 12 Force Feedback effects.

• Gain Settings tab: lets you adjust the power of the Force Feedback effects in your PC games.

General notes:

- On PC, always remember to completely close the Game Controllers window by clicking OK

before launching the game.

- Your racing wheel’s firmware version is displayed in the upper right-hand corner of the

control panel tabs.

You are now ready to play!

Important note:

In order to function on PC, the USB sliding switch (5) on the racing wheel’s base must always

be in the PC position before connecting the racing wheel’s USB cable to the PC.

SELECTED MODE

Color of indicator light (6)

PC

GREEN

16/28

AUTOMATIC RACING WHEEL AND PEDAL SET CALIBRATION

The wheel automatically self-calibrates when you plug the racing wheel into an electrical outlet and

connect the racing wheel’s USB connector to the console.

During this phase, the racing wheel will rotate quickly towards the left and the right, covering a 1080-

degree angle, before stopping at the center.

WARNING:

Never touch the racing wheel during the self-calibration phase!

(This could result in improper calibration and/or personal injuries.)

Never connect the pedal set to the racing wheel’s base (or disconnect it from the base) when it is

connected to the console or during gameplay (this could result in improper calibration).

Always connect the pedal set before connecting the racing wheel to the console.

Once the racing wheel’s calibration is complete and the game has been started, the pedals are

automatically calibrated after a few presses.

WARNING:

Never press the pedals during the racing wheel's

self-calibration phase or while a game is loading!

(This could result in improper calibration.)

If your racing wheel and/or pedal set do not function correctly, or if they seem to be improperly

calibrated:

Power off your console and completely disconnect the racing wheel. Then reconnect all cables

(including the power supply cable and the pedal set), and restart your console and your game.

INTERNAL TEMPERATURE SENSOR

The wheel’s cooling system is composed of a heat sink and a fan.

• A thermostat monitors the wheel’s internal temperature.

• When you are using the wheel in a game:

- The cooling fan starts up when the wheel has reached a certain temperature (after a few minutes

of gameplay, depending on the strength of the Force Feedback effects used).

- The power of the Force Feedback effects automatically decreases as soon as the wheel reaches

a much higher temperature level (to protect the motor). The power of these effects automatically

increases as soon as the temperature slightly decreases.

• When you’re done playing: due to the motor’s thermal inertia, the cooling fan continues to operate

until the temperature drops below the fan’s startup level. Your wheel has been designed in this way

in order to facilitate cooling, and to protect the motor (this may take from 5 to 45 minutes, depending

on the temperature reached while using the wheel in a game).

17/28

MODE BUTTON AND INDICATOR LIGHT (6)

MODE button for the pedal set

You can electronically swap the accelerator and clutch pedals.

Procedure:

Simultaneously press and hold down the MODE + L3 + R3 buttons (located on the T300 racing wheel’s

base) for five seconds, and then release them.

The racing wheel’s internal memory stores whether the pedals have been swapped around or not, and

the indicator light (6) flashes differently according to the mode you have selected:

GAS AND CLUTCH PEDALS

Color of the MODE indicator light (6)

Switching to INVERTED mode

Flashes five times after the procedure, then

continuously flashes once every eight

seconds.

Switching to NORMAL mode

Flashes once after the procedure, then

does not flash continuously.

Other information regarding the MODE button

To learn more about the MODE button and indicator light, please visit

https://support.thrustmaster.com. Click Racing Wheels / T300RS GT Edition, and then select

Manual or FAQ.

HELP FILES AND FAQS

Please visit https://support.thrustmaster.com. Click Racing Wheels / T300RS GT Edition, and

then select Manual or FAQ.

18/28

T3PA – GT EDITION PEDAL SET

19/28

TECHNICAL FEATURES

1 Metal support for conical stop

(not installed by default)

2 Conical stop

3 Attachment screw for metal support

4 2.5 mm Allen key (included)

5 Position adjustment nut for conical stop

6 Pedal arm

7 Plastic head support

8 Metal pedal head

Strona się ładuje...

Thrustmaster 4060069 Instrukcja obsługi

Thrustmaster 4060069 Instrukcja obsługi

w innych językach

Powiązane artykuły