REPLACEMENT PARTS
Please do not contact the company purchased from as we can help you faster.
Order replacement parts and hardware at"boltonfurniture.com"
www.boltonfurniture.com
Tool Included
ASSEMBLY INSTRUCTIONS
Bath Shelf w/ 2 Towel Rods
. Use of power tool to assemble
this product will invalidate any
claim and damage this product
making it unsafe!!!
. Please assemble on a clean soft
surface to avoid damage.
!
12
11
10
9
8
7
6
5
4
3
2
1
50 minutes
Page1 Bath Shelf W/ 2 Towel Rods 2020/9/12
Part List-Bath Shelf W/ 2 Towel Rods
Identifying the hardware-Identify the hardware using the illustrations below.
www.boltonfurniture.com
Page2 Bath Shelf W/ 2 Towel Rods 2020/9/12
Note: If possible, we recommend that when mounting the coat hook that at
least one screw is secured in to a stud.
Step 1
Measure the distance between the two key holes on back of shelf. Mark the
location on the wall where the shelf will be hung.
Step 2
Drill a 1/8" pilot hole 3/4" deep. This will mark the location for the screw that
the coat hook will hang from.
Step 3
If hole location is aligned with a stud in wall, secure screw ( B)directly in to the
stud.
Note:Do not drive screw all the way in, keep head of screw out about 3/8".
Step 4
If hole location does not align with the stud in wall, install the EZ Anchor(C) by
tapping it in to the predrilled pilot hole in the drywall.
Step 5
Secure screws into EZ Anchor(C)
Stud
Wallboard
3/8"
Page3 Bath Shelf W/ 2 Towel Rods 2020/9/12
Step 6
Hang Coat Hook.
www.boltonfurniture.com
Page4 Bath Shelf W/ 2 Towel Rods 2020/9/12
-
1
-
2
-
3
-
4
Alaterre Furniture ANDO704WH Instrukcja obsługi
- Typ
- Instrukcja obsługi
w innych językach
Inne dokumenty
-
Sea Ray 2005 420DA Parts Manual
-
-
-
-
-
-
-
-
-
OmniMount ELEMENTS 403FP Instrukcja obsługi