Electrolux ESL5205LO Instrukcja obsługi

ESL5205LO

EN Dishwasher User Manual 2

FR Lave-vaisselle Notice d'utilisation 20

PL Zmywarka Instrukcja obsługi 41

CONTENTS

1. SAFETY INFORMATION....................................................................................2

2. SAFETY INSTRUCTIONS..................................................................................4

3. PRODUCT DESCRIPTION................................................................................ 5

4. CONTROL PANEL............................................................................................. 6

5. PROGRAMMES................................................................................................. 6

6. SETTINGS..........................................................................................................7

7. BEFORE FIRST USE....................................................................................... 10

8. DAILY USE.......................................................................................................11

9. HINTS AND TIPS............................................................................................. 12

10. CARE AND CLEANING..................................................................................14

11. TROUBLESHOOTING....................................................................................15

12. TECHNICAL INFORMATION......................................................................... 19

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that

brings with it decades of professional experience and innovation. Ingenious and

stylish, it has been designed with you in mind. So whenever you use it, you can

be safe in the knowledge that you’ll get great results every time.

Welcome to Electrolux.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com/webselfservice

Register your product for better service:

www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the

following data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

www.electrolux.com2

responsible for any injuries or damages that are the

result of incorrect installation or usage. Always keep the

instructions in a safe and accessible location for future

reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning the use of the appliance in a

safe way and understand the hazards involved.

• Do not let children play with the appliance.

• Keep detergents away from children.

• Keep children and pets away from the appliance when

the door is open.

• Children shall not carry out cleaning and user

maintenance of the appliance without supervision.

1.2 General Safety

• This appliance is intended to be used in household

and similar applications such as:

– farm houses; staff kitchen areas in shops, offices

and other working environments;

– by clients in hotels, motels, bed & breakfast and

other residential type environments.

• Do not change the specification of this appliance.

• The operating water pressure (minimum and

maximum) must be between 0.5 (0.05) / 8 (0.8) bar

(MPa)

• Obey the maximum number of 13 place settings.

• If the supply cord is damaged, it must be replaced by

the manufacturer, its Authorised Service Centre or

similarly qualified persons in order to avoid a hazard.

• Put the cutlery in the cutlery basket with the sharp

ends pointing down or put them in the cutlery drawer

in a horizontal position with the sharp edges down.

ENGLISH 3

• Do not leave the appliance with the open door

unattended to avoid stepping accidentally onto it.

• Before any maintenance operation, deactivate the

appliance and disconnect the mains plug from the

socket.

• Do not use high pressure water sprays and/or steam

to clean the appliance.

• If the appliance has ventilation openings in the base,

they must not be covered e.g. by a carpet.

• The appliance is to be connected to the water mains

using the new supplied hose-sets. Old hose sets must

not be reused.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Do not install or use the appliance

where the temperature is less than 0

°C.

• Follow the installation instruction

supplied with the appliance.

• Always take care when moving the

appliance as it is heavy. Always use

safety gloves and enclosed footwear.

• Make sure that the appliance is

installed below and adjacent to safe

structures.

2.2 Electrical connection

WARNING!

Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the parameters on the

rating plate are compatible with the

electrical ratings of the mains power

supply.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to

the mains plug and to the mains

cable. Should the mains cable need to

be replaced, this must be carried out

by our Authorised Service Centre.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

• This appliance complies with the

E.E.C. Directives.

• UK and Ireland only. This appliance is

fitted with a 13 A mains plug. If it is

necessary to change the mains plug

fuse, use only a 13 A ASTA (BS

1362) fuse.

2.3 Water connection

• Do not cause damage to the water

hoses.

• Before connection to new pipes, pipes

not used for a long time, where repair

work has been carried out or new

devices fitted (water meters, etc.), let

the water flow until it is clean and

clear.

www.electrolux.com4

• Ensure that there are no visible water

leaks during and after the first use of

the appliance.

• The water inlet hose has a safety

valve and a sheath with an inner

mains cable.

WARNING!

Dangerous voltage.

• If the water inlet hose is damaged,

immediately close the water tap and

disconnect the mains plug from the

mains socket. Contact the Authorised

Service Centre to replace the water

inlet hose.

2.4 Use

• Do not sit or stand on the open door.

• Dishwasher detergents are

dangerous. Obey the safety

instructions on the detergent

packaging.

• Do not drink and play with the water in

the appliance.

• Do not remove the dishes from the

appliance until the programme is

complete. Some detergent may

remain on the dishes.

• The appliance can release hot steam

if you open the door while a

programme operates.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

2.5 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door catch to prevent

children and pets to get closed in the

appliance.

3. PRODUCT DESCRIPTION

4

3

7

9

8

10

56

11

1

2

1

Upper spray arm

2

Lower spray arm

ENGLISH 5

3

Filters

4

Rating plate

5

Salt container

6

Air vent

7

Rinse aid dispenser

8

Detergent dispenser

9

Cutlery basket

10

Lower basket

11

Upper basket

4. CONTROL PANEL

21

3

45

1

On/off button

2

Programme indicators

3

Indicators

4

Programme button

5

Delay button

4.1 Indicators

Indicator Description

End indicator.

Rinse aid indicator. It is always off while the programme operates.

Salt indicator. It is always off while the programme operates.

5. PROGRAMMES

Programme Degree of soil

Type of load

Programme

phases

Consumption values

1)

Duration

(min)

Energy

(kWh)

Water

(l)

2)

Normal soil

Crockery and

cutlery

• Pre-wash

• Wash 50 °C

• Rinses

• Dry

227 1.039 11

Heavy soil

Crockery, cut‐

lery, pots and

pans

• Pre-wash

• Wash 70 °C

• Rinses

• Dry

155 - 170 1.5 - 1.7 14-15

www.electrolux.com6

Programme Degree of soil

Type of load

Programme

phases

Consumption values

1)

Duration

(min)

Energy

(kWh)

Water

(l)

Normal soil

Crockery and

cutlery

• Pre-wash

• Wash 65 °C

• Rinses

• Dry

130 - 140 1.4 - 1.6 15-17

3)

Fresh soil

Crockery and

cutlery

• Wash 60 °C

or 65 °C

• Rinses

30 0.8 10

4)

All • Pre-wash 14 0.1 5

1)

The pressure and the temperature of the water, the variations of the mains supply, the

options and the quantity of dishes can change the values.

2)

With this programme you have the most efficient use of water and energy consumption

for crockery and cutlery with normal soil. (Also, it is a standard programme for test insti‐

tutes).

3)

With this programme you can wash a load with fresh soil. It gives good washing results in

a short period of time.

4)

Use this programme to quickly rinse the dishes and to prevent the food remains from dry‐

ing out on the dishes and to reduce bad odour coming out from the appliance. Do not use

detergent with this programme.

5.1 Information for test

institutes

For all the necessary information for test

performance, send an email to:

[email protected]

Write down the product number (PNC)

that is on the rating plate.

6. SETTINGS

6.1 Programme selection mode

and user mode

When the appliance is in programme

selection mode it is possible to set a

programme and to enter the user mode.

Settings available in the user mode:

• The level of water softener according

to the water hardness.

• Activation or deactivation of the

acoustic signal for the end of a

programme.

• Activation or deactivation of AirDry.

As the appliance stores the saved

settings, there is no need to configure

it before every cycle.

How to set the programme

selection mode

The appliance is in programme selection

mode when the programme indicator

flashes.

After activation, the appliance is in

programme selection mode by default. If

not, set the programme selection mode

the following way:

Press and hold the programme button

until the appliance is in programme

selection mode.

ENGLISH 7

How to enter user mode

Make sure the appliance is in

programme selection mode.

To enter the user mode, press and hold

the programme button until the indicator

flashes and the indicator is

on.

6.2 The water softener

The water softener removes minerals

from the water supply, which would have

a detrimental effect on the washing

results and on the appliance.

The higher the content of these minerals,

the harder your water is. Water hardness

is measured in equivalent scales.

The water softener should be adjusted

according to the hardness of the water in

your area. Your local water authority can

advise you on the hardness of the water

in your area. It is important to set the

right level of the water softener to assure

good washing results.

Water hardness

German de‐

grees (°dH)

French de‐

grees (°fH)

mmol/l Clarke de‐

grees

Water softener

level

47 - 50 84 - 90 8.4 - 9.0 58 - 63 10

43 - 46 76 - 83 7.6 - 8.3 53 - 57 9

37 - 42 65 - 75 6.5 - 7.5 46 - 52 8

29 - 36 51 - 64 5.1 - 6.4 36 - 45 7

23 - 28 40 - 50 4.0 - 5.0 28 - 35 6

19 - 22 33 - 39 3.3 - 3.9 23 - 27

5

1)

15 - 18 26 - 32 2.6 - 3.2 18 - 22 4

11 - 14 19 - 25 1.9 - 2.5 13 - 17 3

4 - 10 7 - 18 0.7 - 1.8 5 - 12 2

<4 <7 <0.7 < 5

1

2)

1)

Factory setting.

2)

Do not use salt at this level.

Whether you use a standard detergent

or multi-tabs (with or without salt), set

the proper water hardness level to

keep the salt refill indicator active.

Multi-tabs containing salt are

not effective enough to

soften hard water.

How to set the water softener

level

Make sure the appliance is in user mode.

1. Wait until the indicators and

are off and the indicator flashes.

The indicator still flashes.

The intermittent flashing of the

indicator

shows the current

setting.

• e.g. 5 flashes + pause + 5 flashes

= level 5.

2. Press the programme button

repeatedly to change the setting.

Each pressing of the programme

button increases the level number.

After reaching level 10, the count

starts again from level 1.

www.electrolux.com8

3. Press on/off to confirm the setting.

6.3 Acoustic signals

Acoustic signals sound when a

malfunction of the appliance occurs. It is

not possible to deactivate these acoustic

signals.

There is also an acoustic signal that

sounds when the programme is

completed. By default this acoustic signal

is deactivated but it is possible to

activate it.

How to activate the acoustic

signal for the end of

programme

Make sure the appliance is in user mode.

1. Press the programme button

immediately.

• The indicator and are

on.

• The indicator flashes.

2. Wait until the indicator and

are off. The indicator still

flashes.

• The indicator shows the

current setting: indicator off =

Acoustic signal off.

3. Press the programme button to

change the setting.

• indicator on = Acoustic signal

on.

4. Press on/off confirm the setting.

6.4 AirDry

AirDry improves the drying results with

less energy consumption.

During the drying phase, the

door opens automatically

and remains ajar.

CAUTION!

Do not try to close the

appliance door within 2

minutes after automatic

opening. This can cause

damage to the appliance.

AirDry is automatically activated with all

programmes excluding .

CAUTION!

If children have access to

the appliance, it is advised to

deactivate AirDry as opening

the door may pose a danger.

How to deactivate AirDry

Make sure the appliance is in user mode.

1. Press the programme button twice.

• The indicators and

are on.

• The indicator flashes.

2. Wait until the indicators and

are off. The indicator still

flashes.

• The

indicator shows the

current setting: off = AirDry is

deactivated.

3. Press the programme button to

change the setting.

• on = AirDry is activated.

4. Press on/off to confirm the setting.

ENGLISH 9

7. BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If

not, adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the

baskets.

After starting a programme, it may take

up to 5 minutes for the appliance to

recharge the resin in the water softener.

It seems that the appliance is not

working. The washing phase starts only

after this procedure is completed. The

procedure is repeated periodically.

7.1 The salt container

CAUTION!

Use rough salt designed for

dishwashers only. Fine salt

increases the risk of

corrosion.

The salt is used to recharge the resin in

the water softener and to assure good

washing results in daily use.

How to fill the salt container

1. Turn the cap of the salt container

counterclockwise and remove it.

2. Put 1 litre of water in the salt

container (only for the first time).

3. Fill the salt container with 1 kg of salt

(until it is full).

4. Carefully shake the funnel by its

handle to get the last granules inside.

5. Remove the salt around the opening

of the salt container.

6. Turn the cap of the salt container

clockwise to close the salt container.

CAUTION!

Water and salt can come out

of the salt container when

you fill it. After you fill the

salt container, immediately

start a programme to

prevent corrosion.

7.2 How to fill the rinse aid

dispenser

A

B

D

C

www.electrolux.com10

M

A

X

1

2

3

4

+

-

A

B

D

C

CAUTION!

Only use rinse aid

specifically designed for

dishwashers.

1. Press the release button (D) to open

the lid (C).

2. Pour the rinse aid in the dispenser

(A) until the liquid reaches the fill

level 'max'.

3. Remove the spilled rinse aid with an

absorbent cloth to prevent too much

foam.

4. Close the lid. Make sure that the

release button locks into position.

You can turn the selector of

the released quantity (B)

between position 1 (lowest

quantity) and position 4 or 6

(highest quantity).

8. DAILY USE

1. Open the water tap.

2. Press the on/off button to activate the

appliance.

Make sure that the appliance is in

programme selection mode.

• If the salt indicator is on, fill the

salt container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.

4. Add the detergent.

5. Set and start the correct programme

for the type of load and the degree of

soil.

8.1 Using the detergent

30

20

A BD

C

20

30

B

A D

C

1. Press the release button (B) to open

the lid (C).

2. Put the detergent, in powder or

tablets, in the compartment (A).

3. If the programme has a prewash

phase, put a small quantity of

detergent in the compartment (D).

4. Close the lid. Make sure that the

release button locks into position.

8.2 Using the multi-tablets

When you use tablets, that contain salt

and rinse aid, do not fill the salt container

and the rinse aid dispenser.

1. Adjust the water softener to the

lowest level.

2. Set the rinse aid dispenser to the

lowest position.

ENGLISH 11

8.3 Setting and starting a

programme

Starting a programme

1. Keep the appliance door ajar.

2. Press the on/off button to activate the

appliance. Make sure that the

appliance is in programme selection

mode.

3. Press the programme button

repeatedly until the indicator of the

programme you want to select starts

flashing.

4. Close the appliance door to start the

programme.

Starting a programme with

delay start

1. Set a programme.

2. Press Delay to delay the start of the

programme of 3 hours.

• The indicator

comes on.

3. Close the appliance door to start the

countdown.

When the countdown is completed, the

programme starts.

Opening the door while the

appliance operates

Opening the door while a programme is

running stops the appliance. It may affect

the energy consumption and the

programme duration. After closing the

door, the appliance continues from the

point of interruption.

If the door is opened for

more than 30 seconds

during the drying phase, the

running programme ends. It

does not happen if the door

is opened by AirDry function.

Do not try to close the

appliance door within 2

minutes after AirDry

automatically opens it, as

this may cause damage to

the appliance.

If, afterwards, the door is

closed for another 3

minutes, the running

programme ends.

Cancelling the delay start

Press and hold the programme button

until the appliance is in programme

selection mode.

When you cancel the delay start, you

have to set the programme again.

Cancelling the programme

Press and hold the programme button

until the appliance is in programme

selection mode.

Make sure that there is detergent in the

detergent dispenser before you start a

new programme.

End of the programme

When the programme is completed the

indicator is on.

1. Press the on/off button or wait for the

appliance to switch to standby mode.

If you open the door before the

activation of standby mode, the

appliance is automatically

deactivated.

2. Close the water tap.

9. HINTS AND TIPS

9.1 General

The following hints will ensure optimal

cleaning and drying results in daily use

and also help to protect the environment.

• Remove larger residues of food from

the dishes into the waste bin.

• Do not pre-rinse dishes by hand.

When needed, use the prewash

www.electrolux.com12

programme (if available) or select a

programme with a prewash phase.

• Always use the whole space of the

baskets.

• When loading the appliance, make

sure that the dishes can be

completely reached and washed by

the water released from the spray arm

nozzles. Make sure that items do not

touch or cover each other.

• You can use dishwasher detergent,

rinse aid and salt separately or you

can use the multi-tablets (e.g. ''3in1'',

''4in1'', ''All in 1''). Follow the

instructions written on the packaging.

• Select the programme according to

the type of load and degree of soil.

With the ECO programme you have

the most efficient use of water and

energy consumption for crockery and

cutlery with normal soil.

9.2 Using salt, rinse aid and

detergent

• Only use salt, rinse aid and detergent

for dishwasher. Other products can

cause damage to the appliance.

• In areas with hard and very hard

water we recommend to use plain

dishwasher detergent (powder, gel,

tablets containing no additional

agents), rinse aid and salt separately

for optimal cleaning and drying

results.

• At least once a month run the

appliance with the use of appliance

cleaner which is particularly suitable

for this purpose.

• Detergent tablets do not fully dissolve

with short programmes. To prevent

detergent residues on the tableware,

we recommend that you use the

tablets with long programmes.

• Do not use more than the correct

quantity of detergent. Refer to the

instructions on the detergent

packaging.

9.3 What to do if you want to

stop using multi-tablets

Before you start to use separately

detergent, salt and rinse aid do the

following procedure.

1. Set the highest level of the water

softener.

2. Make sure that the salt and rinse aid

containers are full.

3. Start the shortest programme with a

rinsing phase. Do not add detergent

and do not load the baskets.

4. When the programme is completed,

adjust the water softener according

to the water hardness in your area.

5. Adjust the released quantity of rinse

aid.

9.4 Loading the baskets

• Only use the appliance to wash items

that are dishwasher-safe.

• Do not put in the appliance items

made of wood, horn, aluminium,

pewter and copper.

• Do not put in the appliance items that

can absorb water (sponges,

household cloths).

• Remove larger residues of food from

the dishes into the waste bin.

• Make soft the remaining burned food

on the items.

• Put hollow items (cups, glasses and

pans) with the opening down.

• Make sure that glasses do not touch

other glasses.

• Put cutlery and small items in the

cutlery basket.

• Put light items in the upper basket.

Make sure that the items do not

move.

• Make sure that the spray arms can

move freely before you start a

programme.

9.5 Before starting a

programme

Make sure that:

• The filters are clean and correctly

installed.

• The cap of the salt container is tight.

• The spray arms are not clogged.

• There is dishwasher salt and rinse aid

(unless you use multi- tablets).

• The position of the items in the

baskets is correct.

• The programme is applicable for the

type of load and for the degree of soil.

ENGLISH 13

• The correct quantity of detergent is

used.

9.6 Unloading the baskets

1. Let the tableware cool down before

you remove it from the appliance. Hot

items can be easily damaged.

2. First remove items from the lower

basket, then from the upper basket.

At the end of the program

water can still remain on the

sides and on the door of the

appliance.

10. CARE AND CLEANING

WARNING!

Before maintenance,

deactivate the appliance and

disconnect the mains plug

from the main socket.

Dirty filters and clogged

spray arms decrease the

washing results. Make a

check regularly and, if

necessary, clean them.

10.1 Cleaning the filters

The filter system is made of 3 parts.

C

B

A

1. Turn the filter (B) counterclockwise

and remove it.

2. Remove the filter (C) out of filter (B).

3. Remove the flat filter (A).

4. Wash the filters.

5. Make sure that there are no residues

of food or soil in or around the edge

of the sump.

6. Put back in place the flat filter (A).

Make sure that it is correctly

positioned under the 2 guides.

www.electrolux.com14

7. Reassemble the filters (B) and (C).

8. Put back the filter (B) in the flat filter

(A). Turn it clockwise until it locks.

CAUTION!

An incorrect position of the

filters can cause bad

washing results and damage

to the appliance.

10.2 Cleaning the spray arms

Do not remove the spray arms. If the

holes in the spray arms are clogged,

remove remaining parts of soil with a thin

pointed object.

10.3 External cleaning

• Clean the appliance with a moist soft

cloth.

• Only use neutral detergents.

• Do not use abrasive products,

abrasive cleaning pads or solvents.

10.4 Internal cleaning

• Carefully clean the appliance,

including the rubber gasket of the

door, with a soft damp cloth.

• If you regularly use short duration

programmes, these can leave

deposits of grease and limescale

inside the appliance. To prevent this,

we recommend to run long duration

programmes at least 2 times per

month.

• To maintain the performance of your

appliance at its best, we recommend

to use monthly a specific cleaning

product for dishwashers. Follow

carefully the instructions on the

packaging of the product.

11. TROUBLESHOOTING

If the appliance does not start or it stops

during operation, before you contact an

Authorised Service Centre, check if you

can solve the problem by yourself with

the help of the information in the table.

WARNING!

Repairs not properly done

may result in serious risk to

the safety of the user. Any

repairs must be performed

by qualified personnel.

With some problems the end indicator

flashes intermittently indicating a

malfunction.

The majority of problems that can

occur can be solved without the need

to contact an Authorised Service

Centre.

ENGLISH 15

Problem and alarm code Possible cause and solution

You cannot activate the appliance. • Make sure that the mains plug is connected

to the mains socket.

• Make sure that there is no damaged fuse in

the fuse box.

The programme does not start. • Make sure that the appliance door is closed.

• If the delay start is set, cancel the setting or

wait for the end of the countdown.

• The appliance has started the procedure to

recharge the resin inside the water softener.

The duration of the procedure is approxi‐

mately 5 minutes.

The appliance does not fill with wa‐

ter.

• The end indicator flashes 1 time

intermittently.

• Acoustic signal sounds 1 time in‐

termittently.

• Make sure that the water tap is open.

• Make sure that the pressure of the water

supply is not too low. For this information,

contact your local water authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is

not clogged.

• Make sure that the inlet hose has no kinks

or bends.

The appliance does not drain the

water.

• The end indicator flashes 2 times

intermittently.

• Acoustic signal sounds 2 times

intermittently.

• Make sure that the sink spigot is not clog‐

ged.

• Make sure that the drain hose has no kinks

or bends.

The anti-flood device is on.

• The end indicator flashes 3 times

intermittently.

• Acoustic signal sounds 3 times

intermittently.

• Close the water tap and contact an Author‐

ised Service Centre.

The appliance stops and starts

more times during operation.

• It is normal. It provides optimal cleaning re‐

sults and energy savings.

The program lasts too long. • If the delayed start option is set, cancel the

delay setting or wait for the end of the

countdown.

Small leak from the appliance door. • The appliance is not levelled. Loosen or

tighten the adjustable feet (if applicable).

• The appliance door is not centred on the

tub. Adjust the rear foot (if applicable).

The appliance door is difficult to

close.

• The appliance is not levelled. Loosen or

tighten the adjustable feet (if applicable).

• Parts of the tableware are protruding from

the baskets.

www.electrolux.com16

Problem and alarm code Possible cause and solution

Rattling/knocking sounds from in‐

side the appliance.

• The tableware is not properly arranged in

the baskets. Refer to basket loading leaflet.

• Make sure that the spray arms can rotate

freely.

The appliance trips the circuit-beak‐

er.

• The amperage is insufficient to supply si‐

multaneously all the appliances in use.

Check the socket amperage and the capaci‐

ty of the meter or turn off one of the applian‐

ces in use.

• Internal electrical fault of the appliance.

Contact an Authorised Service Centre.

Refer to "Before first use",

"Daily use", or "Hints and

tips" for other possible

causes.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.

For alarm codes not described in the

table, contact an Authorised Service

Centre.

11.1 The washing and drying results are not satisfactory

Problem Possible cause and solution

Poor washing results. • Refer to "Daily use", "Hints and tips" and basket

loading leaflet.

• Use more intensive washing programmes.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

Poor drying results. • Tableware has been left for too long inside a

closed appliance.

• There is no rinse aid or the dosage of rinse aid is

not enough. Set the rinse aid dispenser to a higher

level.

• Plastic items may need to be towel dried.

• We recommend to always use rinse aid, even in

combination with multi-tablets.

There are whitish streaks or

bluish layers on glasses and

dishes.

• The release quantity of rinse aid is too much. Ad‐

just the rinse aid level to a lower level.

• The quantity of detergent is too much.

There are stains and dry wa‐

ter drops on glasses and

dishes.

• The released quantity of rinse aid is not sufficient.

Adjust the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.

ENGLISH 17

Problem Possible cause and solution

The dishes are wet. • The programme does not have a drying phase or

has a drying phase with low temperature.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the cause.

• The quality of the multi-tablets can be the cause.

Try a different brand or activate the rinse aid dis‐

penser and use rinse aid and multi-tablets together.

The interior of the appliance

is wet.

• This is not a defect of the appliance. it is caused by

the humidity in the air that condenses on the walls.

Unusual foam during wash‐

ing.

• Use the detergent for dishwashers only.

• There is a leak in the rinse aid dispenser. Contact

an Authorised Service Centre.

Traces of rust on cutlery. • There is too much salt in the water used for wash‐

ing. Refer to "The water softener".

• Silver and stainless steel cutlery were placed to‐

gether. Avoid to put silver and stainless steel items

close together.

There are residues of deter‐

gent in the dispenser at the

end of the programme.

• The detergent tablet got stuck in the dispenser and

therefore was not completely washed away by wa‐

ter.

• Water cannot wash away the detergent from the

dispenser. Make sure that the spray arm is not

blocked or clogged.

• Make sure that items in the baskets do not impede

the lid of the detergent dispenser from opening.

Odours inside the appliance. • Refer to "Internal cleaning".

Limescale deposits on the

tableware, on the tub and on

the inside of the door.

• The level of salt is low, check the refill indicator.

• The cap of the salt container is loose.

• Your tap water is hard. Refer to "The water soft‐

ener".

• Even using multi-functional tabs use salt and set

regeneration of the water softener. Refer to "The

water softener".

• If lime scale deposits still remain, clean the appli‐

ance with appliance cleaners which are particularly

suitable for this purpose.

• Try different detergent.

• Contact the detergent manufacturer.

Dull, discoloured or chipped

tableware.

• Make sure that only dishwasher-safe items are

washed in the appliance.

• Load and unload the basket carefully. Refer to bas‐

ket loading leaflet.

• Place delicate items in the upper basket.

www.electrolux.com18

Refer to "Before first use",

"Daily use" or "Hints and

tips" for other possible

causes.

12. TECHNICAL INFORMATION

Dimensions Width / height / depth

(mm)

596 / 818 - 898 / 550

Electrical connection

1)

Voltage (V) 220 - 240

Frequency (Hz) 50

Water supply pressure Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8)

Water supply

Cold water or hot water

2)

max 60 °C

Capacity Place settings 13

Power consumption Left-on mode (W) 5.0

Power consumption Off-mode (W) 0.50

1)

Refer to the rating plate for other values.

2)

If the hot water comes from alternative source of energy, (e.g. solar panels, aeolian ener‐

gy), use the hot water supply to decrease energy consumption.

13. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol .

Put the packaging in relevant containers

to recycle it. Help protect the

environment and human health by

recycling waste of electrical and

electronic appliances. Do not dispose of

appliances marked with the symbol

with the household waste. Return the

product to your local recycling facility or

contact your municipal office.

ENGLISH 19

TABLE DES MATIÈRES

1. INFORMATIONS DE SÉCURITÉ..................................................................... 20

2. CONSIGNES DE SÉCURITÉ........................................................................... 22

3. DESCRIPTION DE L'APPAREIL......................................................................24

4. BANDEAU DE COMMANDE............................................................................ 24

5. PROGRAMMES............................................................................................... 25

6. RÉGLAGES......................................................................................................26

7. AVANT LA PREMIÈRE UTILISATION............................................................. 29

8. UTILISATION QUOTIDIENNE..........................................................................30

9. CONSEILS........................................................................................................32

10. ENTRETIEN ET NETTOYAGE.......................................................................34

11. EN CAS D'ANOMALIE DE FONCTIONNEMENT...........................................35

12. CARACTÉRISTIQUES TECHNIQUES...........................................................39

NOUS PENSONS À VOUS

Merci d'avoir choisi ce produit Electrolux. Avec ce produit, vous bénéficiez de

dizaines d'années d'expérience professionnelle et d'innovation. Ingénieux et

élégant, il a été conçu sur mesure pour vous. Grâce à cet appareil, vous savez

que chaque utilisation vous apportera satisfaction.

Bienvenue chez Electrolux.

Visitez notre site Internet pour :

Obtenir des conseils d'utilisation, des brochures, de l'aide, des informations :

www.electrolux.com/webselfservice

Enregistrez votre produit pour obtenir un meilleur service :

www.registerelectrolux.com

Acheter des accessoires, consommables et pièces de rechange d'origine pour

votre appareil :

www.electrolux.com/shop

SERVICE APRÈS-VENTE

Utilisez toujours des pièces d'origine.

Avant de contacter le service après-vente, assurez-vous de disposer des

informations suivantes : Modèle, PNC, numéro de série.

Vous trouverez ces informations sur la plaque signalétique.

Avertissement/Consignes de sécurité

Informations générales et conseils

Informations en matière de protection de l'environnement

Sous réserve de modifications.

1. INFORMATIONS DE SÉCURITÉ

Avant d'installer et d'utiliser cet appareil, lisez

soigneusement les instructions fournies. Le fabricant ne

www.electrolux.com20

Strona jest ładowana ...

Electrolux ESL5205LO Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

Electrolux ESL5205LO Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty