PRODUCT DESCRIPTION PRODUCT DIMENSIONS SPECIFICATIONS WARRANTY
Signature Series Beveled Style 17"
Paper Towel Holder w/Swivel Door
17"x11" Paper Towel Holder
w/Swivel Door
Item No. BA-TH17
Product Dimensions Cut-Out Dimensions & Installation
1. Locate the Two Hinge Screws &
the Single Pin Screw and remove
all Three to remove Towel Holder.
Product Features
17" WIDTH x11-1/4" HEIGHT x8-
3/4" DEPTH (PRODUCT SIZE) 15"
WIDTH x9-1/4" HEIGHT x8-1/4"
DEPTH (CUT-OUT)
•EXTERIOR FINISH -----------------3 YEARS
•STRUCTURE ------------------------3 YEARS
•HANDLE------------------------------1 YEAR
The Frame and All Parts are made from
16 gauge 304 SS. The Door Panel is
made from 18 gauge 304 SS w/Light
Horizontal Brushed Finish #4. The
Handle is Cast Chrome Plated
SIGNATURE SERIES
BEVELED STYLE
11-1/4" Height
17" Width
8-3/4" Depth
15" Height
9-1/4" Width
8-1/4" Depth
Cut-Out Changes to
15" Width by 9-1/4" Height
when Paper Towel Holder is
installed as Horizontal
After Inserting the Paper Towel
Holder into Cut-Out. Open the Tilt-
Out Door. Notice the Two Exposed
Pre-Drilled Holes. You can use
Screws to secure with just these two
holes or you can remove the Door
Holder to access other two holes.
2. With the Door Holder removed,
you will have access to the other two
holes to secure box into framing.
INSTALL AS EITHER
HORIZONTAL
VERTICAL
REMOVABLE PAPER
TOWEL ROD
60 DEGREE SWIVEL HINGE
FULLY SEALED BOX
PRE-DRILLED HOLES
BEVELED RAISED FRAME
-
1
w innych językach
Inne dokumenty
-
Strasser 51.924 Instrukcja instalacji
-
Sea Ray 2003 400 SEDAN BRIDGE Parts Manual
-
-
-
-
-
-