Model: AP120-SL Series
6” Duct
Static Pressure (inches w.g.)
0.1
0.25
Air Volume (CFM)
120
105
Noise (sones)
0.9
n/a
Power Consumption (Watts)
33
32.3
Energy Efficiency (CFM/Watts)
3.6
3.26
Current (AMPS)
0.28
0.27
Grille Dimensions 13 3/8” x 13 3/8”
Model
Qty
Comments
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
Specifications
AP 120-SL SERIES
Slim Fit Bathroom Fan with 10W 3000K LED Light
ETL Listed for installation over tub/shower enclosure with
GFCI circuit wiring.
Description: Quiet slim fit bathroom fan with 10W 3000K 850
Lumens LED light Engineered for continuous run Ceiling or
mount Suitable for new construction or remodeling HVI
certified ETL listed for use in insulated ceilings (Type I.C.).
Motor/Blower: Permanently lubricated enclosed condenser
motor engineered for continuous energy efficient operation;
power rating 120v/60Hz; motor equipped with thermal shut off.
Housing: Rugged 26 GA galvanized steel; 2 anti-vibration hangar
bar brackets adjustable to 24” span included; designed for ceilings
with a minimum of 6” clearance.
Duct: Detachable 4” and 6” duct connector with built-in back draft
dampener.
Grille: Contemporary design; low maintenance, wipe clean UV
inhibiting polymeric resin; attaches to housing with torsion
springs.
Finishes: White (W); Satin Nickel (SN); Oil Rubbed Bronze
(OR).
Light: 10W 3000K 850 Lumens LED light.
Installation: Must be installed by a licensed professional.
Complete installation instructions included.
Warranty: Six (6) Years
Architect’s Specifications: Ventilation fan will be ceiling or wall
mount no more than 0.9 sones at 120 CFM as certified by HVI at
0.1 Ps (inches water gauge). Power consumption shall be no
greater than 33 watts with an efficiency rating of no less than 3.4
CFM/watt. Light shall be 10W 3000K LED light. The motor will
be permanently lubricated, engineered for continuous operation.
Duct diameter will be 6” round. Fan shall be ETL/cETL listed
for tub/shower enclosure when used with GFCI branch circuit
wiring and shall be ETL/cETL listed for use in insulated ceiling
(Type I.C.).
Aero Pure, LLC 1006 Bankton Circle Ste B Hanahan, SC 29410 843.377.8642
www.aeropure fans.c om
Model: AP120H-SL Series
6” Duct
Static Pressure (inches w.g.)
0.1
0.25
Air Volume (CFM)
120
111
Noise (sones)
0.9
n/a
Power Consumption (Watts)
33
32.3
Energy Efficiency (CFM/Watts)
3.6
3.4
Current (AMPS)
0.28
0.27
Grille Dimensions
13 3/8’ x 13 3/8”
Model
Qty
Comments
Project
Location
Architect
Engineer
Contractor
Submitted by
Date
Specifications
AP 120H-SL SERIES
Slim Fit Bathroom Fan with 10W 3000K LED Light
and Integrated Humidity Sensor
ETL Listed for installation over tub/shower enclosure with
GFCI circuit wiring.
Description: Slim fit bathroom fan with 10W 3000K 850 Lumens
LED light Engineered for continuous run Integrated user
adjustable humidity sensor Ceiling or wall mount Suitable for new
construction or remodeling HVI certified ETL listed for use in
insulated ceilings (Type I.C.).
Motor/Blower: Permanently lubricated enclosed condenser motor
engineered for continuous energy efficient operation; power rating
120v/60Hz; motor equipped with thermal shut off.
Housing: Rugged 26 GA galvanized steel; 2 anti-vibration hangar
bar brackets adjustable to 24” span included; designed for ceilings
with a minimum of 6” clearance.
Duct: Detachable 4” and 6” duct connector with built-in back draft
dampener.
Grille: Contemporary design; low maintenance, wipe clean UV
inhibiting polymeric resin; attaches to housing with torsion springs.
Finishes: White (W); Satin Nickel (SN); Oil Rubbed Bronze (OR).
Light: 10W 3000K 850 Lumens LED light.
User-Adjustable Integrated Sensor: Humidity sensor adjustable
from 50-100% relative humidity (RH).
Installation: Must be installed by a licensed professional. Complete
installation instructions included.
Warranty: 6 Years
Architect’s Specifications: Ventilation fan will be ceiling or wall
mount and no more than 0.9 sones at 120 CFM as certified by HVI
at 0.1 Ps (inches water gauge). Power consumption shall be no greater
than 33 watts with an efficiency rating of no less than 3.6 CFM/watt.
Light shall be 10W 3000K LED light. Fan will begin operation when
humidity rises above user adjustable setpoint (50-100% RH). The
motor will be permanently lubricated, engineered for continuous
operation. Duct diameter will be 4” or 6” round. Fan shall be
ETL/cETL listed for tub/shower enclosure when used with GFCI
branch circuit wiring and shall be ETL/cETL listed for use in
insulated ceiling (Type I.C.).
Aero Pure, LLC 1006 Bankton Circle Ste B Hanahan, SC 29410 843.377.8642
www.aeropure fans.c om
-
1
-
2
Aero Pure AP120H-SL SN Specyfikacja
- Typ
- Specyfikacja
- Niniejsza instrukcja jest również odpowiednia dla
w innych językach
- English: Aero Pure AP120H-SL SN Specification