Yamaha PSR-S650 Instrukcja obsługi

Owner’s Manual

DIGITAL WORKSTATION

EN

Before using the instrument, be sure to read “PRECAUTIONS” on pages 4-5.

2

SPECIAL MESSAGE SECTION

This product utilizes batteries or an external power supply (adapter).

DO NOT connect this product to any power supply or adapter other

than one described in the manual, on the name plate, or specifically

recommended by Yamaha.

WARNING:

Do not place this product in a position where anyone could

walk on, trip over, or roll anything over power or connecting cords of any

kind. The use of an extension cord is not recommended! If you must use an

extension cord, the minimum wire size for a 25’ cord (or less) is 18 AWG.

NOTE: The smaller the AWG number, the larger the current handling

capacity. For longer extension cords, consult a local electrician.

This product should be used only with the components supplied or; a

cart, rack, or stand that is recommended by Yamaha. If a cart, etc., is

used, please observe all safety markings and instructions that accom-

pany the accessory product.

SPECIFICATIONS SUBJECT TO CHANGE:

The information contained in this manual is believed to be correct at

the time of printing. However, Yamaha reserves the right to change or

modify any of the specifications without notice or obligation to update

existing units.

This product, either alone or in combination with an amplifier and

headphones or speaker/s, may be capable of producing sound levels

that could cause permanent hearing loss. DO NOT operate for long

periods of time at a high volume level or at a level that is uncomfort-

able. If you experience any hearing loss or ringing in the ears, you

should consult an audiologist.

IMPORTANT: The louder the sound, the shorter the time period before

damage occurs.

Some Yamaha products may have benches and / or accessory

mounting fixtures that are either supplied with the product or as

optional accessories. Some of these items are designed to be dealer

assembled or installed. Please make sure that benches are stable and

any optional fixtures (where applicable) are well secured BEFORE

using.

Benches supplied by Yamaha are designed for seating only. No other

uses are recommended.

NOTICE:

Service charges incurred due to a lack of knowledge relating to how a

function or effect works (when the unit is operating as designed) are

not covered by the manufacturer’s warranty, and are therefore the

owners responsibility. Please study this manual carefully and consult

your dealer before requesting service.

ENVIRONMENTAL ISSUES:

Yamaha strives to produce products that are both user safe and envi-

ronmentally friendly. We sincerely believe that our products and the

production methods used to produce them, meet these goals. In keep-

ing with both the letter and the spirit of the law, we want you to be

aware of the following:

Battery Notice:

This product MAY contain a small non-rechargeable battery which (if

applicable) is soldered in place. The average life span of this type of bat-

tery is approximately five years. When replacement becomes necessary,

contact a qualified service representative to perform the replacement.

This product may also use “household” type batteries. Some of these

may be rechargeable. Make sure that the battery being charged is a

rechargeable type and that the charger is intended for the battery being

charged.

When installing batteries, never mix old batteries with new ones, and

never mix different types of batteries. Batteries MUST be installed cor-

rectly. Mismatches or incorrect installation may result in overheating and

battery case rupture.

Warning:

Do not attempt to disassemble, or incinerate any battery. Keep all bat-

teries away from children. Dispose of used batteries promptly and as

regulated by the laws in your area. Note: Check with any retailer of

household type batteries in your area for battery disposal information.

Disposal Notice:

Should this product become damaged beyond repair, or for some rea-

son its useful life is considered to be at an end, please observe all

local, state, and federal regulations that relate to the disposal of prod-

ucts that contain lead, batteries, plastics, etc. If your dealer is unable

to assist you, please contact Yamaha directly.

NAME PLATE LOCATION:

The name plate is located on the bottom of the product. The model

number, serial number, power requirements, etc., are located on this

plate. You should record the model number, serial number, and the

date of purchase in the spaces provided below and retain this manual

as a permanent record of your purchase.

Model

Serial No.

Purchase Date

PLEASE KEEP THIS MANUAL

92-BP (bottom)

1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!

This product, when installed as indicated in the instructions con-

tained in this manual, meets FCC requirements. Modifications not

expressly approved by Yamaha may void your authority, granted by

the FCC, to use the product.

2. IMPORTANT: When connecting this product to accessories and/

or another product use only high quality shielded cables. Cable/s

supplied with this product MUST be used. Follow all installation

instructions. Failure to follow instructions could void your FCC

authorization to use this product in the USA.

3. NOTE: This product has been tested and found to comply with the

requirements listed in FCC Regulations, Part 15 for Class “B” digital

devices. Compliance with these requirements provides a reason-

able level of assurance that your use of this product in a residential

environment will not result in harmful interference with other elec-

tronic devices. This equipment generates/uses radio frequencies

and, if not installed and used according to the instructions found in

the users manual, may cause interference harmful to the operation

of other electronic devices. Compliance with FCC regulations does

not guarantee that interference will not occur in all installations. If

this product is found to be the source of interference, which can be

determined by turning the unit “OFF” and “ON”, please try to elimi-

nate the problem by using one of the following measures:

Relocate either this product or the device that is being affected by

the interference.

Utilize power outlets that are on different branch (circuit breaker or

fuse) circuits or install AC line filter/s.

In the case of radio or TV interference, relocate/reorient the

antenna. If the antenna lead-in is 300 ohm ribbon lead, change the

lead-in to co-axial type cable.

If these corrective measures do not produce satisfactory results,

please contact the local retailer authorized to distribute this type of

product. If you can not locate the appropriate retailer, please con-

tact Yamaha Corporation of America, Electronic Service Division,

6600 Orangethorpe Ave, Buena Park, CA90620

The above statements apply ONLY to those products distributed by

Yamaha Corporation of America or its subsidiaries.

* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)

FCC INFORMATION (U.S.A.)

3

COMPLIANCE INFORMATION STATEMENT

(DECLARATION OF CONFORMITY PROCEDURE)

Responsible Party : Yamaha Corporation of America

Address : 6600 Orangethorpe Ave., Buena Park,

Calif. 90620

Telephone : 714-522-9011

Type of Equipment : Digital Keyboard

Model Name : PSR-S650

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference, and

2) this device must accept any interference received including

interference that may cause undesired operation.

See user manual instructions if interference to radio reception is

suspected.

* This applies only to products distributed by

YAMAHA CORPORATION OF AMERICA.

(FCC DoC)

Owner’s Manual

4

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

WARNING

Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-

circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following:

• Do not place the power cord near heat sources such as heaters or radiators, and

do not excessively bend or otherwise damage the cord, place heavy objects on it,

or place it in a position where anyone could walk on, trip over, or roll anything

over it.

• Only use the voltage specified as correct for the instrument. The required voltage

is printed on the name plate of the instrument.

• Use the specified adaptor (page 70) only. Using the wrong adaptor can result in

damage to the instrument or overheating.

• Check the electric plug periodically and remove any dirt or dust which may have

accumulated on it.

• This instrument contains no user-serviceable parts. Do not open the instrument

or attempt to disassemble or modify the internal components in any way. If it

should appear to be malfunctioning, discontinue use immediately and have it

inspected by qualified Yamaha service personnel.

• Do not expose the instrument to rain, use it near water or in damp or wet

conditions, place on it any containers (such as vases, bottles or glasses)

containing liquids which might spill into any openings. If any liquid such as water

seeps into the instrument, turn off the power immediately and unplug the power

cord from the AC outlet. Then have the instrument inspected by qualified Yamaha

service personnel.

• Never insert or remove an electric plug with wet hands.

• Do not put burning items, such as candles, on the unit.

A burning item may fall over and cause a fire.

• When one of the following problems occur, immediately turn off the power switch

and disconnect the electric plug from the outlet. Then have the device inspected

by Yamaha service personnel.

• The power cord or plug becomes frayed or damaged.

• It emits unusual smells or smoke.

• Some object has been dropped into the instrument.

• There is a sudden loss of sound during use of the instrument.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the

instrument or other property. These precautions include, but are not limited to, the following:

• Do not connect the instrument to an electrical outlet using a multiple-connector.

Doing so can result in lower sound quality, or possibly cause overheating in the

outlet.

• When removing the electric plug from the instrument or an outlet, always hold the

plug itself and not the cord. Pulling by the cord can damage it.

• Remove the electric plug from the outlet when the instrument is not to be used for

extended periods of time, or during electrical storms.

• Do not place the instrument in an unstable position where it might accidentally

fall over.

• Before moving the instrument, remove all connected cables.

• When setting up the product, make sure that the AC outlet you are using is easily

accessible. If some trouble or malfunction occurs, immediately turn off the power

switch and disconnect the plug from the outlet. Even when the power switch is

turned off, electricity is still flowing to the product at the minimum level. When

you are not using the product for a long time, make sure to unplug the power cord

from the wall AC outlet.

• Use only the stand specified for the instrument. When attaching the stand or rack,

use the provided screws only. Failure to do so could cause damage to the internal

components or result in the instrument falling over.

• Before connecting the instrument to other electronic components, turn off the

power for all components. Before turning the power on or off for all components,

set all volume levels to minimum.

• Be sure to set the volumes of all components at their minimum levels and

gradually raise the volume controls while playing the instrument to set the desired

listening level.

• Do not insert a finger or hand in any gaps on the instrument.

• Never insert or drop paper, metallic, or other objects into the gaps on the panel or

keyboard. This could cause physical injury to you or others, damage to the

instrument or other property, or operational failure.

• Do not rest your weight on, or place heavy objects on the instrument, and do not

use excessive force on the buttons, switches or connectors.

• Do not use the instrument/device or headphones for a long period of time at a

high or uncomfortable volume level, since this can cause permanent hearing loss.

If you experience any hearing loss or ringing in the ears, consult a physician.

Always turn the power off when the instrument is not in use.

Even when the power switch is in standby status, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time, make

sure you unplug the power cord from the wall AC outlet.

Power supply/AC power adaptor

Do not open

Water warning

Fire warning

If you notice any abnormality

Power supply/AC power adaptor

Location

Connections

Handling caution

Yamaha cannot be held responsible for damage caused by improper use or modifications to the instrument, or data that is lost or destroyed.

DMI-3 1/2

Owner’s Manual

5

NOTICE

To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the

notices below.

 Handling and Maintenance

• Do not use the instrument in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, the instrument, TV, or radio

may generate noise.

• Do not expose the instrument to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day)

to prevent the possibility of panel disfiguration, damage to the internal components or unstable operation. (Verified operating temperature range: 5° –

40°C, or 41° – 104°F.)

• Do not place vinyl, plastic or rubber objects on the instrument, since this might discolor the panel or keyboard.

• When cleaning the instrument, use a soft, cloth. Do not use paint thinners, solvents, cleaning fluids, or chemical-impregnated wiping cloths.

 Saving data

• Some data items (page 53) are automatically saved as backup data in the internal memory even if you turn the power off. Saved data may be lost due to

malfunction or incorrect operation. Save important data to a USB flash memory (pages 57–58) or a computer (refer to the Reference Manual.)

To protect against data loss through media damage, we recommend that you save your important data onto two USB storage devices/external media.

Information

 About copyrights

• Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal

use.

• This product incorporates and bundles computer programs and contents in which Yamaha owns copyrights or with respect to which it has license to use

others’ copyrights. Such copyrighted materials include, without limitation, all computer software, style files, MIDI files, WAVE data, musical scores and

sound recordings. Any unauthorized use of such programs and contents outside of personal use is not permitted under relevant laws. Any violation of

copyright has legal consequences. DON’T MAKE, DISTRIBUTE OR USE ILLEGAL COPIES.

 About functions/data bundled with the instrument

• Some of the preset songs have been edited for length or arrangement, and may not be exactly the same as the original.

• This device is capable of using various types/formats of music data by optimizing them to the proper format music data for use with the device in advance.

As a result, this device may not play them back precisely as their producers or composers originally intended.

 About this manual

• The illustrations and displays as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your

instrument.

• Windows is a registered trademark of Microsoft

®

Corporation in the United States and other countries.

• Apple, Mac and Macintosh are trademarks of Apple Inc., registered in the U.S. and other countries.

• The bitmap fonts used in this instrument have been provided by and are the property of Ricoh Co., Ltd.

• The company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

• Owner’s Manual (this book)

• Data List

•AC power adaptor

* May not be included depending on your particular area. Please check with your Yamaha dealer.

• My Yamaha Product User Registration

* The PRODUCT ID on the sheet will be needed when you fill out the User Registration form.

•Music rest

Supplied Accessories

DMI-3 2/2

Owner’s Manual

6

The instrument is compatible with the following formats.

GM System Level 2

“GM (General MIDI)” is one of the most common

Voice allocation formats. “GM System Level 2” is a

standard specification that enhances the original

“GM” and improves Song data compatibility.

XG

XG is a major enhancement of the GM System

Level 1 format, and was developed by Yamaha spe-

cifically to provide more Voices and variations, as

well as greater expressive control over Voices and

effects, and to ensure compatibility of data well into

the future.

GS

GS was developed by the Roland Corporation. In the

same way as Yamaha XG, GS is a major enhance-

ment of the GM specifically to provide more Voices

and Drum kits and their variations, as well as greater

expressive control over Voices and effects.

XF

The Yamaha XF format enhances the SMF

(Standard MIDI File) standard with greater

functionality and open-ended expandability for

the future. This instrument is capable of dis-

playing lyrics when an XF file containing lyric

data is played.

SFF GE (Guitar Edition)

“SFF (Style File Format)” is an original Style

file format by Yamaha which uses a unique con-

version system to provide high-quality auto-

matic accompaniment based on a wide range of

chord types. “SFF GE (Guitar Edition)” is an

enhanced format of SFF, which features

improved note transposition for guitar tracks.

USB

USB is an abbreviation for Universal Serial

Bus. It is a serial interface for connecting a

computer with peripheral Devices. It allows

“hot swapping” (connecting peripheral devices

while the power to the computer is on).

 Included Documents

Owner’s Manual (this book)

Provides overall explanations of the PSR-S650 basic functions. In this Owner’s Manual, the “Contents” on page 7,

the “Panel Controls and Terminals” on page 8, and the “Panel Button Chart” on page 65 should be used when you

are searching for a specific function or information The “Contents” lists basic functions of the instrument, the

“Panel Controls and Terminals” provides summary about the panel controls and connectors, and the “Panel Button

Chart” lists all the displays called up from the panel controls. Use one of the methods described above to find the

information you are looking for.

Data List

Contains various important preset content lists such as Voices, Styles and Effects.

 Online Materials (Downloadable from the web)

The following instructional materials are available for downloading from the Yamaha Manual Library. Access the Yamaha

Manual Library, then enter your model name (PSR-S650, for example) in the Model Name area to search the manuals.

Yamaha Manual Library http://www.yamaha.co.jp/manual/

Reference Manual (Only in English, German, French, Spanish, Portuguese, Russian, Chinese and Japanese)

Explains advanced features of the PSR-S650. After reading the Owner’s Manual and you want more detailed infor-

mation about PSR-S650 features, refer to the Reference Manual. To check which manual, Owner’s or Reference,

contains descriptions of the desired function, refer to the Panel Button Chart on page 65.

MIDI Reference (Only in English)

Contains both the MIDI Data Format and the MIDI Implementation Chart, which allows you to confirm MIDI mes-

sages transmitted/recognized by this instrument.

Formats

About the Manuals

Owner’s Manual

7

Contents

Supplied Accessories................................................. 5

Formats...................................................................... 6

About the Manuals ..................................................... 6

Panel Controls and Terminals 8

Setting Up 10

Power Requirements ............................................... 10

Auto Power Off Function.......................................... 10

Connecting a Footswitch.......................................... 10

Connecting Headphones and External Audio

Equipment............................................................ 11

Turning the Power On.............................................. 11

Changing the Display Language.............................. 12

Adjusting the Display CONTRAST control............... 12

Displays and Basic Operation.................................. 13

1

Voices – Playing the Keyboard – 16

Select and Play a Main Voice .................................. 16

Playing Two Voices Simultaneously ........................17

Splitting the Keyboard and Playing the Left Voice

with the Left Hand ................................................ 17

Playing Drum Kits .................................................... 18

Applying Effects to a Voice ......................................19

Changing the Pitch of the Instrument....................... 20

Scale Tuning ............................................................ 22

Touch Response ON/OFF ....................................... 26

Using the Metronome............................................... 27

2

Styles

– Playing Rhythm and Accompaniment – 29

Select and Play a Style ............................................ 29

Changing the Tempo ............................................... 34

One Touch Setting ................................................... 34

3

Using Songs 35

Selecting and Listening to a Song ........................... 35

Changing the Tempo ............................................... 36

Fast Forward, Fast Reverse, and Pause ................. 36

Listening to the Demo Song..................................... 37

Select and Play a Song from USB Flash Memory ... 37

Displaying the Song Score....................................... 38

Displaying the Lyrics ................................................ 38

A-B Repeat .............................................................. 39

4

Recording Your Own Performance 40

Quick Recording Procedure..................................... 40

Multi-track Recording Procedure ............................. 41

Song Clear—Deleting User Songs .......................... 44

Track Clear—Deleting a Specified Track

From a User Song................................................ 45

5

Playing with the Music Database 46

6

Mixer 47

7

Memorizing Your Favorite Panel Settings 49

Memorizing the Panel Settings................................ 50

Recalling the Memorized Panel Settings................. 50

Registration Clear—Deleting the Specified

Registration Memory............................................ 52

8

Initialization 53

Backup Data and Memory Data .............................. 53

Initialization.............................................................. 53

9

Using USB Flash Memory 54

File Control Display ................................................. 55

Formatting USB Flash Memory ............................... 56

Saving the Registration Memory ............................. 57

Saving a User Song or User Style........................... 58

Loading a File .......................................................... 59

Deleting Data from USB Flash Memory .................. 60

10

Expanding Voices and Styles

(Installing to the Expansion Category) 61

11

Connecting to a Computer 63

Appendix 64

Troubleshooting....................................................... 64

Panel Button Chart .................................................. 65

Messages ................................................................ 67

Specifications .......................................................... 69

Index........................................................................ 71

The other functions such as the following ones are described in

the Reference Manual.

• Style Creator

• Song Edit

• Style related functions:

Style Volume, Track Mute

• Song related functions:

Song Volume, Track Mute, Right-Part, Left-part

• MIDI related functions:

PC Mode, Local, External Clock, Keyboard Out, Style Out,

Song Out, Initial Setup

Owner’s Manual

8

Panel Controls and Terminals

Front Panel

q [ ] (Standby/On) switch .................... page 11

Turns the instrument’s power on or Standby.

w MASTER VOLUME control .................. page 11

Adjusts the overall volume.

e [DEMO] button......................................page 37

Plays the Demo.

r [SONG MODE] button ..........................page 35

Switches between Song mode and Style mode.

t SONG buttons ......................................page 35

Selects a Song or show music score and lyrics.

y [USB] button.........................................page 35

Selects a Song or Style file in the USB flash memory.

u [REC] button.........................................page 40

Records your keyboard performance.

i STYLE category selection buttons.....page 29

Selects a Style.

o STYLE CONTROL buttons...........pages 30–31

Controls Style playback.

!0 SONG CONTROL buttons ...................page 36

Controls Song playback.

!1 TRANSPOSE buttons ..........................page 20

Transposes the pitch in semitone steps.

!2 METRONOME button...........................page 27

Plays the Metronome.

!3 TEMPO buttons....................................page 34

Controls the tempo for Style, Song and Metronome

playback.

!4 REGISTRATION MEMORY-related buttons

...............................................................page 49

Lets you execute the function such as changing a Bank

and memorizing the panel settings.

!5 REGISTRATION MEMORY/Track buttons

....................................................... pages 42, 49

Pressing the [REGIST/PART[MIXER]] button at right

will alternate the function of the white eight buttons:

Registration Memory buttons, Song track setting buttons

and Style track setting buttons.

!6 Display and related controls....... pages 13–14

q

w

e

t i

!1

!2

!3

!4

!5

o

!0

@4

y

r

u

Front Panel

Owner’s Manual

9

Panel Controls and Terminals

!7 [MDB] button ........................................page 46

Calls up the appropriate panel settings for the desired

music genre.

!8 [FILE MENU] button .............................page 55

Executes file operations such as loading and saving.

!9 [FUNCTION] button..............................page 15

Allows you to make the detailed settings.

@0 ONE TOUCH SETTING buttons...........page 34

Calls up the appropriate panel settings for the current

Style.

@1 VOICE category selection buttons .....page 16

Selects a Voice.

@2 VOICE CONTROL buttons ...................page 19

Applies some effects to the keyboard performance.

@3 UPPER OCTAVE buttons .....................page 20

Shifts the pitch of the keyboard in octave steps.

@4 PITCH BEND wheel..............................page 20

Bends the pitch of the keyboard played sound up or

down.

Rear Panel

@5 CONTRAST knob ................................. page 12

Adjusts the contrast of the display.

@6 USB TO HOST terminal .......................page 63

For connecting to a computer.

@7 USB TO DEVICE terminal....................page 54

For connecting a USB storage device.

@8 SUSTAIN jack ....................................... page 10

For connecting a footswitch.

@9 PHONES/OUTPUT jack........................ page 11

For connecting headphones, or a powered speaker.

#0 DC IN jack............................................. page 10

For connecting the power adaptor.

!6

@5 @6 @7 @8 #0@9

!7

!8

!9

@0 @2

@1

@3

Rear Panel

• The panel controls q–@4 call up the related displays, all of which are listed in the Panel Button Chart on page 65.

NOTE

Owner’s Manual

10

Setting Up

Be sure to do the following operations

BEFORE turning on the power.

1 Connect one end of the AC cable to the power

adaptor.

2 Connect the power adaptor’s DC plug into the DC

IN jack on the instrument’s rear panel.

3 Plug the AC adaptor into an AC outlet.

Make all necessary connections below

BEFORE turning the power on.

To prevent unnecessary power consumption, this

instrument features an Auto Power Off function that

automatically turns the power off if the instrument is

not operated for a specified period of time. The

amount of time that will elapse before the power is

automatically turned off is set by default to 30 min-

utes. To disable the Auto Power Off function, turn off

the power, then press the [ ] (Standby/On) switch to

turn on the power while holding down the lowest key.

The sustain function lets you produce a natural sustain

as you play by pressing an optional footswitch. Plug a

Yamaha FC4 or FC5 Footswitch into the SUSTAIN

jack and use it to switch sustain on and off.

Power Requirements

• Use the specified adaptor (page 70). The use of other

adaptors may result in irreparable damage to both the

adaptor and the instrument.

• Unplug the AC Power Adaptor when not using the

instrument, or during electrical storms.

WARNING

AC power adaptor

CAUTION

AC power adaptor

3

AC outlet

2

Auto Power Off Function

• The setting time range can be changed in the Function dis-

play. For details, refer to the Reference Manual.

• The data and settings are always backed up, and are main-

tained even when the power is turned off. For information on

the backup parameters, see page 53.

Connecting a Footswitch

• Make sure that the footswitch plug is properly connected to

the SUSTAIN jack before turning on the power.

• Do not press the footswitch while turning the power on. Doing

this changes the recognized polarity of the footswitch, result-

ing in reversed footswitch operation.

Press and hold

NOTE

Owner’s Manual

11

Setting Up

You can connect the PHONES/OUTPUT jack to a set

of headphones, keyboard amplifier, stereo system,

powered speaker, tape recorder, or other line-level

audio device to send the instrument’s output signal to

that device.

The internal speakers are automatically shut off when

a plug is inserted into this jack. The PHONES/OUT-

PUT jack also functions as an external output.

Turn down the volume by turning the MASTER VOL-

UME control to the left and press the [ ] (Standby/

On) switch to turn on the power. While playing the

keyboard, adjust the volume level by using the MAS-

TER VOLUME control. Press the [ ] (Standby/On)

switch again for a second to turn the power to standby.

Connecting Headphones and

External Audio Equipment

• You can set the Master equalizer (EQ) which is provided to

give you the best possible sound when listening through dif-

ferent reproduction systems. The Master equalizer (EQ) can

be set in the Function display. For details, refer to the Refer-

ence Manual.

• Avoid listening with the headphones at high volume for

long periods of time; doing so may not only result in ear

fatigue, it may be damaging to your hearing.

• To prevent damage to the speakers, set the volume of the

external devices at the minimum setting and turn power off

the devices before connecting them. Failure to observe

these precautions may result in electric shock or equip-

ment damage. Also, be sure to set the volumes of all

devices at their minimum levels and gradually raise the vol-

ume controls while playing the instrument to set the

desired listening level.

NOTE

CAUTION

Turning the Power On

• When using a power adaptor, even when the power is off, a

small amount of electricity is still being consumed by the

instrument. When you are not using the instrument for a

long time, make sure to unplug the AC power adaptor from

the wall AC outlet.

• Never attempt to turn the power off when a “Writing..” message is

shown in the display. Doing so can damage the data on the flash

memory and result in a loss of data.

CAUTION

NOTICE

Owner’s Manual

12

Setting Up

This instrument allows you to select English or Japa-

nese as the display language. The default display lan-

guage is English, but if you switch to Japanese the

lyrics, file names and some messages will be dis-

played in Japanese where appropriate.

1 Press the [FUNCTION] button.

2 Press the CATEGORY [<] and [>] buttons repeat-

edly until the “Language” item appears.

The currently selected display language will appear

below the “Language” item.

3 Select a display language.

Using dial to select English or Japanese.

The language selection will be stored in the inter-

nal flash memory so that it is retained even when

the power is turned off.

4 Press the [EXIT] button to return to the Main dis-

play.

Adjust the display CONTRAST control on the rear

panel of the instrument for optimum display legibility.

Changing the Display Language

The currently selected

language

Language item

Adjusting the Display CONTRAST

control

• Looking at the display for a long period of time in the dark

may cause eyestrain or damage to your eyesight. Make

sure to use the instrument with as much ambient light as

possible and also take adequate breaks and rest from use.

Music Rest

CAUTION

Insert the music

rest into the slots

as shown.

Owner’s Manual

13

Setting Up

Main Display

The Main display, called up when the power is turned on, shows all of the current basic settings: Song, Style,

Vo i c e .

It also includes a range of indicators that show the on/off status of a range of functions.

 To Return to the Main Display

Since the instrument has so many different displays, you may occasionally find yourself confused as to

which operation’s display is currently shown. In such a case, return to the Main display by pressing the

[EXIT] button.

Displays and Basic Operation

Tempo

(page 34)

Transpose

(page 20)

Measure number

(page 43)

Octave

(page 20)

Registration Memory /

Song or Style track

indication

Shows currently selected item:

REGIST., TR 1–8, TR 9–16

(page 49)

A-B Repeat

Appears when the Repeat

function is on for Song playback.

(page 39)

USB status

Appears when the USB flash

memory is connected (page 55).

Chord

Display

(page 32)

Registration Memory

bank status

(page 49)

Song / Style track status

(page 41)

Main Voice (page 16)

Dual Voice (page 17)

Left Voice (page 17)

Style (page 29)

Song (page 35)

Music Database

(page 46)

Harmony

(page 19)

Touch Response

(page 26)

Sustain

(page 19)

Owner’s Manual

14

Setting Up

VOICE, STYLE, SONG, and MDB Select Displays

Press one of the category selection buttons such as VOICE, STYLE, SONG, or press the [MDB] button to call up

selection display for each. In each display, you can select an item as desired using the CATEGORY buttons or the

dial.

 Select a Category

Use the CATEGORY [<] and [>] buttons to step in sequence through the categories.

 Select a Voice, Style, Song or MDB

Use the dial or the [-/NO]/[+/YES] buttons to select an item as desired. Press and hold either button to continu-

ously increment or decrement the value in the corresponding direction.

Category

Item

Next categoryPrevious category

Decrease Increase

Press briefly to

increment.

Press briefly to

decrement.

Owner’s Manual

15

Setting Up

Function Display

In the Function display, you can make detailed settings for this instrument. The Function display appears when the

[FUNCTION] button is pressed. In the display you can use the CATEGORY [<] and [>] buttons to select 60 dif-

ferent function items. Press the CATEGORY button(s) as many times as necessary until the required function

appears, then use the dial or the [-/NO] and [+/YES] buttons to adjust the value of the function as required. To

recall the default value, press the [-/NO] and [+/YES] buttons simultaneously.

All items which can be selected in the Function display are listed in the Panel Button Chart on page 66.

 Move the highlighted Position

In some Function displays, pressing the [EXECUTE] button will move the highlighted position from the current

one to the other one.

 Shortcut

You can jump directly to certain Function displays by holding the related button for longer than a second. The but-

tons are as follows:

• [FUNCTION] button ..............Scale

• [DEMO] button.......................Demo Group

• [ACMP] button .......................Chord Fingering

• [METRONOME] button.........Time Signature-Numerator

• [FREEZE] button....................Freeze Group Setting

• [HARMONY] button..............Harmony Type

• [TOUCH] button.....................Touch Sensitivity

• [DSP] button ...........................DSP Type

This can be particularly handy since such a large number of Functions are available.

Function item

Value

Owner’s Manual

16

Voices – Playing the Keyboard –

In addition to piano, organ, and other standard keyboard instruments, this instrument

has a large range of realistic Voices—including guitar, bass, strings, sax, trumpet,

drums and percussion, sound effects, and a wide variety of other musical sounds.

In this operation, you’ll select a Main Voice and play it on the keyboard.

1

Select and press the desired Voice category button in the Voice

section.

The Main Voice selection display will appear. The currently selected category

name, Voice number and name will be highlighted.

You can select the GM&XG category Voice by pressing the [PIANO] button

then CATEGORY [<] button to call up the GM&XG category.

2

Select the Voice you want to play.

Look at the highlighted Voice name and rotate the dial. The available Voices

will be selected and displayed in sequence. The Voice selected here becomes the

Main Voice.

3

Play the keyboard.

Try selecting and playing a variety of Voices.

Press the [EXIT] button to return to the Main display.

Select and Play a Main Voice

• To change the Voice cate-

gory, press another category

button.

NOTE

MAIN VOICE

selection display

CATEGORY name

Current selected

Voice

• The main Voice parameters

such as Volume can be set

in the Function display. For

details, refer to the Refer-

ence Manual.

NOTE

1

Owner’s Manual

17

1. Voices – Playing the Keyboard –

Once you press the [DUAL] button to turn the Dual Voice on, a second voice will sound that will play in addition

to the Main Voice when you play the keyboard. The second voice is known as the “Dual Voice.”

Press the button again to turn the Dual Voice off.

 Selecting a Dual Voice

You can select any voice as a Dual Voice. Press and hold the [DUAL] button for lon-

ger than a second to call up the Dual Voice selection display, then select a Dual Voice

in the same way as selecting a Main Voice. After selecting, press the [EXIT] button

to return to the MAIN display.

Once you press the [LEFT] button to turn the Left Voice on, you can play different Voices to the left and right of

the keyboard “split point.” The Main and Dual voices can be played to the right of the split point, while the Voice

played to the left of the split point is known as the “Left Voice.”

Press the button again to turn the Left Voice off.

 Selecting a Left Voice

You can select any voice as a Left Voice. Press and hold the [LEFT] button for lon-

ger than a second to call up the Left Voice selection display, then select a Left Voice

in the same way as selecting a Main Voice. After selecting, press the [EXIT] button

to return to the MAIN display.

Playing Two Voices Simultaneously

• The Dual Voice parameters

such as Voice Volume can

be set in the Function dis-

play. For details, refer to the

Reference Manual.

NOTE

The button lights

when Dual is ON.

Two Voices will sound at the

same time.

Splitting the Keyboard and Playing the Left Voice with the Left Hand

• The Left Voice parameters

such as Volume can be set

in the Function display. For

details, refer to the Refer-

ence Manual.

NOTE

The button lights when

Left Voice is ON.

Split point

Left Voice Main Voice and

Dual Voice

Owner’s Manual

18

1. Voices – Playing the Keyboard –

Drum Kits are collections of drum and percussion instruments. When you select a violin or other normal

instrument—as a Main Voice, for example—all keys produce the sound of the same violin, only at different

pitches. If you select a Drum Kit as the Main Voice, however, each key produces the sound of a different

drum or percussion instrument.

1

Press the [DRUM KIT] button.

The “Drum Kit” category appears.

2

Rotate the dial and select the Drum Kit you want to play (001–025).

A good Drum Kit to start out with is 003, Standard Kit 1.

Drum Kit List

3

Play each key and enjoy the Drum Kit.

Example: 003 Standard Kit 1

Playing Drum Kits

Voi ce

No.

Drum Kit name

Voice

No.

Drum Kit name

Voice

No.

Drum Kit name

Voice

No.

Drum Kit name

001 Power Kit 1 008 Room Kit 015 Analog Kit 022 Arabic Mixture Kit

002 Power Kit 2 009 Rock Kit 016 Dance Kit 023 Indian Kit

003 Standard Kit 1 010 Electro Kit 017 Symphony Kit 024 Chinese Kit

004 Standard Kit 2 011 AnalogT8 Kit 018 Cuban Kit 025 Chinese Mixture Kit

005 Hit Kit 012 AnalogT9 Kit 019 PopLatin Kit

006 Jazz Kit 013 Break Kit 020 Arabic Kit

007 Brush Kit 014 HipHop Kit 021 Arabic Kit 2

• See the Drum Kit List in the

separate Data List.

NOTE

Ride Cymbal 1

Tambourine

Cowbell

Vibraslap

Bongo L

Hi-Hat Open

Crash Cymbal 1

Hand Clap

Hi-Hat Closed

Hi-Hat Pedal

Open Rim Shot

Side Stick

Castanet

Sticks

Brush Tap

Brush Slap

Conga H Open

Timbale L

Agogo L

Maracas

Guiro Short

Claves

Cuica Mute

Triangle Mute

Shaker

Chinese Cymbal

Ride Cymbal Cup

Splash Cymbal

Crash Cymbal 2

Ride Cymbal 2

Bongo H

Conga H Mute

Mid Tom L

Mid Tom H

High Tom

Snare Tight

Floor Tom L

Low Tom

Floor Tom H

Kick Tight

Kick

Snare

Snare Roll

Snare Soft

Kick Soft

Seq Click H

Brush Swirl

Brush Tap Swirl

Conga L

Timbale H

Agogo H

Cabasa

Samba Whistle H

Samba Whistle L

Guiro Long

Wood Block H

Wood Block L

Cuica Open

Triangle Open

Jingle Bells

Bell Tree

C3

Owner’s Manual

19

1. Voices – Playing the Keyboard –

You can apply effects to a Voice played on the keyboard by pressing the Voice Control buttons. To turn the effect

off, press the button again.

You can see the on/off status for the Harmony and Sustain in the Main display.

How to Play Each Harmony Type

The Harmony behaves differently depending on the type. Check the current Har-

mony Type on the display by holding the [HARMONY] button for longer than a sec-

ond.

Reverb and Chorus

The other effects provided are Reverb and Chorus. Reverb lets you play with a rich

concert hall type ambience, and Chorus effect creates a thick sound that is similar to

many of the same voices being played in unison. A suitable Reverb type and Chorus

type are automatically selected when you select a Style or Song.

Applying Effects to a Voice

• You can specify the Har-

mony type. For details, refer

to the Reference Manual.

• For some Voices, sustain

may not be audibly affected

when the Sustain is turned

on.

• You can specify the DSP

type. For details, refer to the

Reference Manual.

NOTE

Adding Harmony

This feature adds har-

mony notes as well as

tremolo or echo effects to

the Main Voice. A suit-

able Harmony type is

automatically selected

when you select a Main

Voice.

Adding Sustain

This function adds sus-

tain to the keyboard

voices. Use it when you

want to add sustain to the

voices at all times, regard-

less of footswitch opera-

tion. The sustain function

does not affect the Left

Vo i c e .

Adding DSP

A huge variety of DSP

effects are available for

applying to the Main,

Dual and Left Voices. A

suitable DSP type is

automatically selected

when you select a Main

Voice.

The button lights when

DSP is ON.

Appears when Harmony is on

Appears when Sustain is on

Press the right-hand keys while playing chords in the

Auto Accompaniment range of the keyboard when the

Auto Accompaniment is on (page 29).

Play the keys.

Hold the keys. Hold down two keys.

Harmony types 01 to 10, 13 Harmony types 19 to 22 (Tremolo)

Harmony types 15 to 18 (Echo) Harmony types 23 to 26 (Trill)

• You can specify the Reverb

type and Chorus type. For

details, refer to the Refer-

ence Manual.

NOTE

Owner’s Manual

20

1. Voices – Playing the Keyboard –

Using the Pitch Bend Wheel

The Pitch Bend wheel can be used to add smooth pitch variations to notes you play

on the keyboard.

Adjusting the pitch in semitones (Transpose)

The overall pitch of the instrument can be shifted up or down in semitones by press-

ing the TRANSPOSE [+]/[-] buttons. The value is shown in the display, indicating

the amount of transposition over or below the normal value between -12 and +12 (a

maximum of one octave.) The setting can be reset to the initial default value “00” by

pressing the [+] and [-] buttons simultaneously.

Changing the Pitch in Octaves

You can change the playing pitch of the Main and Dual Voices in octave intervals by

pressing the UPPER OCTAVE [-]/[+]buttons. The newly changed value is shown in

the display between -1 and +1. The setting can be reset to the initial default value “0”

by pressing the [-] and [+] buttons simultaneously.

Changing the Pitch of the Instrument

• The pitch bend range can

be changed by setting the

“PB Range” parameter on

the Function display. For

details, refer to the Refer-

ence Manual.

NOTE

• This setting does not affect

the Drum Kit Voices.

NOTE

• When a Drum Kit is selected,

each percussion Voice

assigned to the keyboard is

shifted in location but not

pitch.

NOTE

Strona jest ładowana ...

Yamaha PSR-S650 Instrukcja obsługi

Yamaha PSR-S650 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty