argon audio BT3 Instrukcja obsługi
- Kategoria
- Wzmacniacze słuchawkowe
- Typ
- Instrukcja obsługi
www.argonaudio.com
1
B T 3
Dear Customer,
Quality has always been our driving force and founding Argon Audio is a natural
extension of this philosophy.
We have 20 years’ experience in creating and specifying high quality products,
manufacturing them and selling them on to end users with Value-for-Money as the
primary aim. And Argon Audio is a brand fully compliant with these values.
Design, and engineering is done in Denmark and manufacturing takes place in the Far
East, where quality vendors are highly competitive - and as a result supply outstanding
Value-for-Money products.
- To the delight of both ourselves and our customers!
Congratulations with your BT3, may it bring years of enjoyment.
www.argonaudio.com
2
B T 3
Table of Content
1
Introduction
page
1
1.1
Contents of the box
page
2
1.2
Safety Instructions
page
3
2
Usage, controls and connections
page
4
2.1 Overview of the Back panel
page
4-6
2.2 Using BT3 as D/A converter
page
6
3
Specifications
page
6
1.1 Contents of the box;
o ARGON AUDIO BT3
o 5 volt power supply
o Quick Start Guide
We recommend that you keep the original box and packing material for future.
transportation.
We also recommend that you keep this User Manual for future use.
www.argonaudio.com
3
B T 3
1.2 Safety Instructions
• Unplug this product from the wall outlet before cleaning. Do not use this product near
water or moisture. Do not spill liquids on the product. Clean only with a dry cloth.
• Place the unit on a solid surface.
• Do not put it in a closed bookcase or a cabinet that may keep air from flowing through its
ventilation openings.
• Do not install near any heat sources, such as radiators, heat registers, stoves or other
appliances that produce heat.
• Protect the power cord from being walked on or pinched, particularly at plugs and the
point where they exit from the product.
• During Lightning storms, unplug the product from the power source or if unused for long
periods of time. This will prevent lightning and power-line surge damage to the product.
• Do not attempt to service this product yourself. Opening or removing covers may expose
you to dangerous voltages or other hazards. Please contact the manufacturer to be
referred to an authorized service center near you.
• Do not overload wall outlets, extension cords, or integral power circuits as this can result
in a risk of fire or electric shock.
• Never push any object through the product openings, as this can result in fire, electric
shock or damage.
• Use proper power sources. Plug the product into a proper power source, as described in
the operating instructions or as marked on the product.
If there is a Lightning flash with an arrow head on product or power supply, it’s
intended to alert the User of the presence of un-insulated “dangerous voltage”
within the product or power supply, that might be of
sufficient magnitude to constitute a risk of electric shock to persons.
If there is an Exclamation point on the product or power supply, it’s intended to alert
the User that there is important operating and maintenance (servicing) information
in the User manual.
If there is a double rectangular symbol on the product or power supply, it means
that the product or power supply is double insulated. Earth connection is not
required.
www.argonaudio.com
4
B T 3
2. Usage, controls and connections
Argon Audio BT3 has 3 functions. It can work as:
A. Bluetooth Receiver
B. Bluetooth Transmitter
C. High End D/A converter
Start up and main usage:
Connect the power supply to the Argon Audio BT3 and connect the power supply to
a power outlet.
Power Off: short press power button, Power On: short press power button.
Off light is red, ON light is blue
To pair or un-pair, press and hold pairing button for 3 sec.
2.1 Overview of the Back panel
1. POWER (1). on/off button. Press to power ON or power OFF.
ON will be indicated by a Blue LED light on the front. OFF will be indicated by a
Red LED light on the front.
① ②
③
④
⑦
⑥ ⑤
⑧
www.argonaudio.com
5
B T 3
2. PAIR (2). button.
This button is used to pair your:
a) Playback device (RX mode), such as Mobile Phone
b) Receive device (TX mode), such as Headphone.
a) Playback device (RX mode), pairing a playback device such as a mobile
phone - set TX/RX (3) switch to RX mode.
Go to Bluetooth setting on your Mobile phone, make sure Bluetooth is
activated and select “pair new device”
Press and hold PAIR (2) button on BT3 for 3 sec until the blue LED light on
the front of BT3 starts blinking.
BT3 will show up Make sure Bluetooth is activated on your Mobile Phone
and make sure the BT3 is in ON (steady Blue LED light on the front).
Press and hold the PAIR (2) button for 3 seconds. The Blue LED light on the
front will start blinking.
The BT3 will show up on your Mobile phone. Press on “BT3” on the Mobile
Phone display and it will pair with BT3.
In the process your phone will “ask” to share “contacts etc” choose “yes”.
Your Mobile phone and BT3 are now paired and connected.
In the BT setting screen on your Mobile Phone press the setting button of
the paired BT3 (look like a “wheel”) if your Mobile phone supports HD Audio
it will show in the settings. Activate HD Audio.
b) Receive device (TX mode), pairing a receive device such as a BT
Headphone - set TX/RX (3) switch to TX mode.
Connect BT3 to the source you want to transmit (ex. TV) using optical cable
or analogue cable.
o Optical cable connect to OPTICAL IN (TX) (5)
o Analogue cable connect to AUDIO IN (TX) (4)
Switch button on back of BT3 to TX (3)
Press and hold Pair button for 3 sec until LED light on the front start flashing
blue.
Turn on your receiving device (BT headphone) and put device in pairing
mode.
(BT3 will automatically connect to the closest BT device (the device with the
strongest signal in your surrounding). So make sure to place the device you
want to connect as close as possible to BT3)
When paired and connected with your headphone it will start playback.
To un-pair a device press un-pair button for 3 sec and BT3 will automatically
try to connect with the next device that is ready for pairing.
To avoid paring with a device you don’t want to pair with – turn the unwanted
device off.
3. TX/RX (3). switch, to change between:
Playback mode (TX) – like Mobile Phone, Lap Top
Receive mode (RX) – like a BT Headphone.
D/A converter function mode – set switch to TX (3)
www.argonaudio.com
6
B T 3
4. AUDIO IN (TX) (4).
For Headphone usage (Receive function) connect eg. Your TV (if the TV does
not have optical out) using RCA/Mini-Jack to RCA/Mini-Jack cable.
5. OPTICAL IN (TX) (5).
For Headphone usage (Receive function) connect eg. Your TV (if the TV has
optical out) using a optical to optical cable.
For D/A converter usage – connect from music source device with optical to
optical cable.
6. AUDIO OUT (RX) (6).
For Audio Play back (Play back function) connecting your Amplifier/Playback
device (if your Amplifier/Play back device does not have optical input) using a
RCA/Mini-Jack to RCA/Mini-Jack cable
For D/A converter usage – connect to music source device with RCA to
RCA/Mini-Jack cable.
7. OPTICAL OUT (RX) (7).
For Audio Play back (Play back function) connecting your Amplifier/Playback
device (if your Amplifier/Play back device does have optical input) using an
optical to optical cable.
8. DC 5V IN (8). Power plug
Connect the power supply to BT3 and to main power outlet
2.2 Using BT3 as D/A converter
Set the TX/RX (3) switch on backside of BT3 to TX mode.
Connect the playback music source device to OPTICAL IN (Tx) (5), with an optical
to optical cable.
Connect the BT3 to your amplifier with a RCA cable to Audio Out (Rx) (6) on BT3.
Playback will start. Blue LED will keep flashing for 90 seconds and then it will turn
off. To reactivate BT function and Pairing, press and hold the Pairing button for 3
sec. LED light will start flashing again.
Notice that Bluetooth playback will over rule the D/A converter function. So if you
have paired a BT device and start playing via BT, the D/A converter function will
stop.
3. Specifications
◊ Bluetooth version 5.0 with aptX and HD-Audio
◊ Inputs: 1 x analogue line-in (RCA), 1 x optical digital (up to 24-bit/96kHz, resolution on
digital output will be the same as the resolution from the signal source)
◊ Outputs: 1 x analogue line-out (RCA), 1 x optical digital
◊ D/A-converter function
◊ Both transmit and receive function in BT mode
◊ DAC: ESS Sabre high-end DAC supporting up to 24-bit/96kHz
◊ Measurements: 12,9 x 5,5 x 8,0 (WxHxD)
◊ Weight: 350 grams
-
1
-
2
-
3
-
4
-
5
-
6
argon audio BT3 Instrukcja obsługi
- Kategoria
- Wzmacniacze słuchawkowe
- Typ
- Instrukcja obsługi
w innych językach
- English: argon audio BT3 User manual
