Akai CA-2DIN7064A Car Receiver Soundstar Instrukcja obsługi

USER MANUAL

EN-ENGLISH

CA-2DIN7064A

1. How to read this manual

1.1 How to read this manual

This manual contains pictures to illustrate the steps and precautions. The

pictures in this manual are for reference purposes only, please use them

appropriately.

Bookmark

Important precautions markings, these should be read carefully to prevent

fatalities, injuries and other accidents.

Special instructions, additional explanations, reference mark.

Markings with additional information to assist the driver.

Tips: If there are differences between the instructions and the physical

description of a function, the actual function will prevail.

2. Main interface

2.1 Enable / disable navigation

2.2 Starting

When the ignition switch is in the ACC ON position, press the on-screen touch

button to start navigation.

2.3 Switching off

Once the navigation has been started, press the button on the side of

the screen for 2 seconds and it will close.

2.4 Main interface

At start-up, the system will enter the radio interface directly, press the icon

to access the main interface:

1. Swipe lightly on the screen to change the displayed page, press and hold

an icon to move it.

2. In the interface of another function, press the icon to return to the

previous screen.

3. In the other function interface, press the icon to return to the main

screen.

4. Press the icon to see recently opened applications running in the

background.

5. In the main interface, click the icon to access the interface with all

applications.

6. In the top right area of the main interface you can access settings, car

settings, feedback, WLAN, lighting style change, sound functions.

7. In the main interface, press the [off-screen] icon to close the screen, press

anywhere on the screen to turn it back on.

3. Operating the video function

This function can play video files from a USB or built-in hard drive connected

to the device.

1. The device supports video file formats including MPEG, MPG, MP4, 3GP,

MKV, AVI, FLV and so on.

2. If you try to play video files that your device does not support, a message

will appear on the screen telling you that those files cannot be played.

3. In the [main interface] press the [video] icon to enter the following interface,

as shown below:

During video playback, swipe up and down on the left side of the screen to

adjust the brightness, and on the right side you can adjust the volume in the

same way.

4. Warning

For the safety of you, your car and others around you, please make sure you

comply with the following basic requirements:

Before using this device, please read all instructions carefully. Failure to follow

the instructions will void the warranty.

2. For traffic safety and to avoid breaking traffic rules, do not look into the

screen or use it while driving.

3. To avoid a short circuit, do not allow the device to come into contact with

water when it is raining.

4. To avoid a short circuit, do not leave metal objects (such as coins or metal

tools) inside the device.

5. The device cannot be repaired by the user, for repairs please contact a

professional team.

6. When the engine is switched off, do not use the car navigation for a long

period of time, otherwise the car will run out of battery.

7. Never insert objects into ventilation slots or other openings of the device.

8. Do not use sharp objects that could scratch or damage the screen.

5. Boot Logo Operation

In the [all applications] interface press the [Start Logo] icon to access the

operating settings interface. Press the button at the bottom of the screen (set

the Boot Logo) to access the Boot Logo settings.

Note: Only the full screen size of BMP files can set the start logo, number of

colours and BMP colour intensity of 32. Previously, BMP files must be placed

on an external storage device.

Restart operation (optional)

In the [All Applications] interface touch the [Restart] icon to enter the restart

mode of the system interface: Tap OK to restart the system; restart the system

without tapping the Cancel icon.

6. Call functions

6.1 Call functions

In the [main interface] press the [phone] icon to access the following interface:

6.2 Pair and connect

1. When your phone is paired with this device for the first time, follow the steps

below:

Activate the Bluetooth function of your phone.

2. Search for Bluetooth devices from your phone or navigation and connect.

3. A message will be displayed on the phone screen, enter the password

(0000) from your phone, then press (ENT).

4. After connecting, enter the following interface: the next time you

connect, the Bluetooth system will automatically pair with the last connected

phone. After the devices have successfully paired, the icon on the top right

will be white, otherwise the pairing status will be . In this case,

search your phone for nearby Bluetooth devices to detect navigation.

Call history

Phone book

Dial number

Search for Bluetooth devices

Bluetooth settings

Call

While your phone is connected to navigation, enter a phone number using the

on-screen keypad and then press to initiate a call. If you enter the

wrong number, press once to delete a digit and press and hold to delete

all.

Call interface:

1. Press to display the numeric keypad on the screen. Press again

during a call to hang up.

2. Press to end the call.

3. Press during a voice call to switch between the phone and the car

stereo.

4. Press to activate silent mode.

You can also hang up a call directly from your phone.

6.3 Phone book

Tap the icon to access

the phonebook interface as

illustrated:

6.4 Call history

Tap the icon to access

the following interface:

1. Tap the bottom right icon

to access the incoming and missed calls interface.

Note: Once connected, the phone sends a request message (BC8-Andrdoid

wants to access your contacts and call history. Would you like to grant BC8-

Andrdoid.ask access? Press [Enter] on the phone, and once the phonebook is

downloaded, it will be displayed on the navigation screen, as will the call log.

Press the icon to access the following interface:

2. Press [Device Name PIN code] and the numeric keypad will appear so you

can change the device name and PIN code.

3. Press the icon to set the auto answer function.

7. Changing the background image

In the [main interface] press the [wallpaper] icon to access the following

interface. You can select your favorite background image. After choosing the

image, press the [set wallpaper] icon to finish.

8. Cleaning the device

Cleaning the device

If the surface of the device is dirty, use a clean, soft cloth to wipe it off.

If dirt persists, use a mild detergent, then wipe with a clean, soft cloth to dry.

Mechanical parts cleaning spray can damage the device, do not spray it on.

Using a rough cloth or a volatile liquid (such as thinner or alcohol) to wipe the

device may scratch the surface or erase the keys.

9. Radio operation

9.1 Radio operation

In the [main interface] press the [Radio] icon to access the radio interface:

9.2 Band change

Press the [BAND] icon to switch between FM1, FM2, FM3, AM1, AM2.

9.3 Frequency search

Short press the or icon to change frequencies. Long press for

manual search.

9.4 Automatic search of radio stations for storage

1. Long press the icon to automatically enter radio station search and

store mode. Press the icon again to stop the search function.

1. The FM band can store 18 radio stations (FM1, FM2, FM3 - 6 stations

each). AM can store 12 radio stations (AM1, AM2 - 6 each).

2. You can search for jobs again after the first search has been completed.

10. Bluetooth music playback function

With this feature you can play music through your connected audio device

wirelessly. Your mobile phone must be connected via Bluetooth to the car

navigation. Once your phone has connected to the car via Bluetooth, you can

play music from your phone. In the [main interface], press the [Bluetooth

music] icon to access the following interface:

For some phones, you may need to start playing audio files from your

phone.

11. Dynamic wallpaper function

In the [main interface] press the [Live wallpaper] icon to access the following

interface. Choose your preferred image and press [Set wallpaper] to complete.

12. Key functions

Please refer to the physical key panel to check if it corresponds to the

description in the manual. (If there are differences, the actual keys will prevail.)

1. (On/off switch; mute)

If the device is switched off, press this key briefly to switch it on.

1) When you start navigation, the sound is activated, to deactivate the sound

press the key. Long press the key to close the navigation.

2) If your navigation does not have the key in on mode, press the key

briefly to mute the sound.

2. (Main menu)

Within any application, press this key to return to the main menu.

3. (Back key)

Within any application, press this key to return to the previous menu.

4. (Volume increase)

In any mode, press this key to increase the volume.

5. (Volume discount)

In any mode, press this key to reduce the volume.

13. Music playback function

1) With this function you can play music from USB source or built-in hard drive

connected to the device.

2) The device supports audio file formats including MP3, M4A, WAV, AMR,

WMA, OGG, AAC, MID and so on.

3) If you try to play files that the device does not support, a message will

appear on the screen telling you that those files cannot be played.

4) In the [main interface] press the [music] icon to enter the following interface:

5) Tap the and keys to play the next or previous song.

6) Tap the key to pause.

7) Tap the key to scan the track list.

8) Tap the key to repeat a song or all songs randomly.

14. Quick navigation

With this function you can display images from the USB source or built-in hard

drive connected to the device.

1) The device supports photo file formats including JPG, PNG, BMP, JPEG

and so on.

2) If you try to display files that the device does not support, a message will

appear on the screen telling you that those files cannot be accessed.

3) In [all applications] interface press the [Express plans] icon to enter the

following interface:

4) Tap the icon at the top to select the album and other options.

5) Tap the icon to select how to display the album list.

6) Tap the icon to select sort mode, add files, show hidden files and

other options.

Note:

1. Tap the icon, press [Settings] - [General] - select [Video files] and you

will be able to play video files; if you do not make this setting, you will not be

able to play video files.

15. SETTINGS FUNCTIONS

15.1 SETTINGS FUNCTIONS

In the [all applications] interface, press the [settings] icon to access the

following interface:

15.2 WLAN (wireless local area network) settings

Turning WLAN on and off

Press [WLAN] to open the WLAN settings. Wait for the network nearby to

appear in the list. The following interface will be displayed:

As shown in the figure above, you can search for the network name (on the

router, the name usually contains the letters SSID; generally the settings are

in Chinese). Next to each network name, an icon appears indicating the

signal. If this icon also contains a padlock, the network is encrypted and you

must enter a password before you can connect to it.

Wireless WLAN connectivity

Once you have connected to a wireless network, if it is not encrypted, your

device will automatically connect to the same network the next time you

activate the Wi-Fi function.

If the network is encrypted, click on the network name and a window will

automatically pop up where you have to enter your password and then press

the Connect button.

In the bottom left corner, you can select "Show advanced options" for more

detailed settings, if needed.

Proxy: Without this default function (no general access).

IP settings: default setting is DHCP, automatically get IP address. When static

IP is chosen, you can enter the IP address manually.

The use of mobile data may incur additional costs.

15.3 More settings

Portable hotspot: Press the [Settings] icon and select WLAN Hotspot and the

following interface will appear:

Change the SSID security password and press [save] to finish.

Mobile network: can be set to activate data network, mobile data network

roaming capabilities and other options; tap the [mobile network] icon to enter

the following interface:

15.4 Language

Press the [Language input] icon to access the following interface:

1) The Language Settings page includes selecting a language, keyboard and

input method settings.

2) The product supports Chinese, Traditional Chinese and English.

3) Press the [iFlyTek input method] icon on the right, you can configure input

settings, keyboard settings, voice command settings, handwriting settings,

return to default settings and other functions.

15.5 Date and time settings

In the settings interface, press the [Date and time] icon to access the following

interface. You need to set the date, time, time zone, then tap the [completed]

icon.

15.6 Device information

In the settings interface, you can find information about the Android version of

your device.

16. Operation of optional functions

16.1 AUX operation (optional)

The device has a video input jack for connecting video devices and an audio

input jack for connecting audio devices.

16.2 T-V operation (optional)

When the device is connected by cable to a digital TV source, in the [main

interface] tap the [T-V] icon to activate the digital TV function. Refer to the user

interface of the Bright digital TV source.

16.3 Operation of the ES file browsing function

In the [all applications] interface tap the [ES File Explorer] icon to access the

ES File Browser.

Favorites: You can access news, weather, documents, videos, apps, music

and other websites via Wi-Fi.

Local: ES will automatically navigate to the main storage space.

USB file manager, a variety of file operations, multiple file viewing options with

multiple selection and more complex clipboard functions, search function.

Library: insert a U disc, view images, play music or video and other functions.

Network: Users can use the home network, LAN, network stick, FTP browsing

and other functions to transfer, copy, copy, delete, rename files and folders,

etc... Software backup is also available.

16.4 Toolbox operation (optional)

In the [all applications] interface tap the [Toolbox] icon to enter the Toolbox

interface.

Clear cache: delete or remove unwanted files:

1) Tap the clean icon to delete unwanted files from memory, then view the

remaining and used space.

2) Tap the Apply icon, select video, audio files and then press Delete.

GPS Monitor: You can view GPS parameters and status parameters.

(One Click Setup: Choose the files you want to install and then tap the One

Click Setup icon to install or tap Exit to cancel.

16.5 Function operating instructions

In the [all applications] interface tap the [specifications] icon to access the

manual operation interface, swipe left and right with your fingers, you can

switch to the following interface, (Note: this function describes some of the

operating instructions for the user.)

17. Navigation operations

17.1 Navigation operations

In the [main interface] tap the [Navigation] icon to access the navigation

interface. Press the button to exit the navigation screen and go to the

main screen. After exiting the navigation interface, it will continue to run in the

background.

17.2 Instructions before operating the navigation

1) Make sure the device and satellite dish are connected correctly, the satellite

dishes need to receive signals and update information, you may need to wait a

while. The status bar of the screen will display the connection progress.

2) Make sure the vehicle is not in places where the satellite signal might be

weak, such as a tunnel, bridge, near tall buildings and others.

3) The driver must enter the destination address while in the parking lot. It is

forbidden to use navigation while driving.

17.3 Navigation chart description

As a result of urban construction and the rapid development of road

infrastructure, the manufacturer will continue to update the navigation map.

Please keep the map updated at all times. If you find that the map does not

correspond to the actual road conditions, please follow the rules of the road

you are on.

17.4 Navigation chart description

1) You can find all kinds of search functions based on the needs of the

navigation software to reach your destination, set your destination and then

start planning your route.

2) A route that is in an area familiar to the driver, the driver can choose to

drive that route. Not always the route recommended by navigation is the

shortest route.

17.5 Errors

There may be satellite signal reception errors under normal conditions, at

about 7 meters, and in some cases there may be inconsistencies due to

software updates. It is recommended that you respect the driving conditions of

the road you are on.

Note

The navigation system is complex and due to external electromagnetic

interference caused by operating errors, navigation may not work properly (the

map does not show any images). Restart the GPS to restore normal

operation.

18. Car settings operation

Car settings operation

In the main interface, press the [car settings] icon to access the following

interface:

18.1 Audio settings

Press the icon to adjust the treble and bass levels. Press to

switch between different audio effects such as jazz, classical, rock and more.

Press to turn audio intensity on or off.

Press the [Restore Default] icon to restore the settings to their original state.

18.2 Sound field settings

Press the [Left] and [Right] icons to adjust the left-right volume balance.

Press the [Before] and [After] icons to adjust the up-down volume balance.

Press the icon to quickly set the central audio control point.

18.3 Basic settings

Press the [Close Time Setting] icon to set the duration at the end of which the

screen closes.

Press the icon to set the reversing switch for the parking light

detection function.

18.4 Navigation settings

The navigation system has been factory set, please do not attempt to change

the navigation interface. Otherwise its operation may be affected.

18.5 Backlight settings

Press the icon to adjust the backlight settings.

18.6 Radio

Choose your favorite radio frequency in your country.

18.7 Default volume

Press the icon to adjust the default volume.

18.8 Default control

Via the original steering wheel, the system can also be controlled. Press the

plus and minus buttons on the steering wheel to set the desired order of

functions on the navigation screen and select them.

18.9 Voice settings

On the [Voice settings] screen, drag this icon to control the voice settings.

18.10 Factory settings

On the [Factory settings] screen, tap the [Restore Factory] icon and enter

password 1234. Tap the [Erase everything] icon to restore the system to

factory settings. The system will then restart automatically.

All installed programs and user data will be deleted.

19. Operating the CAMERA function

When the device is connected to the CAMERA video input, in the [all

applications] interface tap the [CAMERA] icon to enter the following interface:

1. When the car engine is not connected to the device, no image appears in

the CAMERA interface.

2. When the device is connected with the car engine, the CAMERA interface

displays the loading process. The screen will then display the image captured

by the front camera.

This function is only available when the device is connected to the CAMERA

video input.

20. Troubleshooting

Troubleshooting guide for common problems

Fault 1: Device does not start

Cause: Power supply fuse is blown

Solution: Replace the fuse with one of the same type

Fault 2: Device does not start

Reason: Other factors contributing to microprocessor failure

Solution: After 10 seconds, restart the device

Fault 3: After the stop button is pressed, the settings are cleared

Reason: Replace battery or fuse

Solution: Reset information and save

Fault 4: Weak input signals

Reason: Radio signal is weak

Solution: The machine is in another location, search again

Fault 5: No image

Reason: Other factors contributing to microprocessor failure

Solution: After 10 seconds, restart the device

Strona jest ładowana ...

Akai CA-2DIN7064A Car Receiver Soundstar Instrukcja obsługi

Akai CA-2DIN7064A Car Receiver Soundstar Instrukcja obsługi

w innych językach