LZR LZR®-SIGMA instrukcja

Marka
LZR
Model
LZR®-SIGMA
Typ
instrukcja

Niniejsza instrukcja jest również odpowiednia dla

Quickguide
People counting solution
Scan
me to
start
X0006F
FRONT FACE
COUNTING HEAD
SURFACE
MOUNTING BASE
SCREWS
OR
+
/
PoE
POWER SUPPLY
LZR SIGMA APP
SENSORIO.COM
Where do you want to install SIGMA?
1
A
B
TOP VIEW
B
A
Max 30 cm
ENTRANCE
Min 0 cm
In a pathway, an entrance, above a sliding door... Above a swing door
- Install SIGMA in the center of the pathway
- Mount it parallel and at a maximum distance of 30
cm from the entrance.
Sigma ts anywhere (doors, walls, ceilings).
Just make sure you place it overhead
Single leaf
When possible, install SIG-
MA on the closing side in
the middle, outside the
swing path (option 1).
When that is not possible,
you can install SIGMA on
the opening side. Make
sure you place it right
above the cutting edge
(option2).
Install SIGMA in the cen-
ter. Preferred side is the
closing side, outside the
swing path (option 1).
Double leaf
closing side
closing side
1
2
1
2
Make sure direction A is the one going away from the wall!
Choose a direction for your ow of people
Scan
me to
start
X0006F
Dene A and B directions
2
A
Measure the width of the counting area to determine the number of sensors needed
H
W
1 sensor
W
x sensors
H
H W max
2 m 1,6 m
2,5 m 2,5 m
3,5 m 3,5 m
4 m 4,5 m
5,5 m 7,5 m
Pairing several sensors
If you use more than one sensor, check the detection fields using our online sizer tool: www.meetsigma.io/sizer/
3
Assembly
"CLICK"
Pass the cable through the base
Open Sigma
If necessary, a piece of the base can be removed with a cutting tool
Remove the counting head by unclipping it
Caution – Do not open
the counting head
as it may result in
hazardous radiation
exposure.
4
Scan
me to
start
X0006F
Fix the base on the ceiling
Connect the cable to the counting head.
Clip the counting head to the base and close Sigma
"CLICK"
"CLICK"
PZ2 3-4 mm
8-10 mm 3 mm
Adapt screw lenght and type accordingly
Or use BEA’s wall mounting accessory to x it on the wall
Mobile App
OR
Open and follow the app to complete the installation.
Scan the QR Code (on the device or on the box) or download the LZR Sigma app on:
Scan
me to
start
X0006F
Scan
me to
start
X0006F
Searching for network (0 - 5 min.)
Connected to the network
WEB SERVER
Static IP adress : 192.168.1.2
User name: device ID (see tags on the device)
Password: password
ONLINE DEVICE MANAGER
Go to www.sensorio.com to
manage your portfolio of sensors.
5
www.bea-sensors.com
www.meetsigma.io
High precision Independent of
the environment
Autonomous
connectivity
Device Manager
sensorio.com
Easy Set Up
Mobile App
Discover SIGMA
meetsigma.io
Solid LED Flashing LEDLegend:
LED signal Cause Action
No internet connection
The ethernet conguration is wrong or no cellular
network is available
Check the network connection
Check if port 8883 is opened
Device is not powered
Note that the LED can also be o when the device
is in normal operation
Check power supply
Communicating with the app or with sensorio.
Connected to the network
The device is communicating
Searching for network The device is connecting to the network
Learning Dene the max. limit on your right or left
Error If this occurs, please contact BEA.
Updating
Connection to the device is impossible
Wait for update completion
At least one of the following port is not
opened : 123 (UDP) / 22 (TCP) / 443 (TCP)
Check network settings with your IT support
Understanding Sigma
Technical Specications
Technology LASER scanner, time-of-ight measurement
Emission characteristics - IR LASER Wavelength 905 nm ; average output power 0.05 mW; Class 1 (EN 60825)
Device dimensions
200 mm [L] x 142 mm [W] x 61 mm [H] (elliptical)
(if mounted with recessed accessory : visible height 37 mm, invisible height 65 mm)
Temperature range - 25° C to 55°C if powered (storage temperature -35°C to +70°C)
Humidity 0 - 95% non-condensing
Power
24 VDC ± 10% External DC power or PoE (IEEE802.3af)
Power consumption Max. 12 W/Peak - Average 6 W
Data transfer 3G/2G cellular, Ethernet (cable cat. 5/6)
Supported frequencies / Power GSM 850 - 824 to 849 MHz (Tx) - 869 to 894 MHz (Rx) - 2 W (Max. Power)
E-GSM 900 - 880 to 915 MHz (Tx) - 925 to 960 MHz (Rx) - 2 W (Max. Power)
DCS 1800 - 1710 to 1785 MHz (Tx) - 1805 to 1880 MHz (Rx) - 1 W (Max. Power)
PCS 1900 - 1850 to 1910 MHz (Tx) - 1930 to 1990 MHz (Rx) - 1 W (Max. Power)
Installation height 2 m to 5.5 m
Counting width coverage Ratio [0.8 - 1.35] depending on mounting height (cf. sizer tool:
www.meetsigma.io/sizer/)
Ports 123 NTP (UDP) / 22 SFTP (TCP) / 443 HTTPS (TCP) / 8883 MQTTS (TCP)
Video validation
(optional feature)
Resolution 160px x 120px, frame rate 15 fps
(for counting proof purposes only)
Counting data refresh rate / granularity 1 min. (granularity 1 min.) to 24h (granularity 5 min.)
Protection degree IP53
Conformity
BEA hereby declares that the radio equipment type LZR®-Sigma is in compliance with
Directive 2014/53/EU (RED) and Directive 2011/65/EU (RoHS). The full text of the EU
declaration of conformity is available on our website.
LED signal Cause Action
No internet connection
The ethernet conguration is wrong or no cellular
network is available
Check the network connection
Check if port 8883 is opened
Device is not powered
Note that the LED can also be o when the device
is in normal operation
Check power supply
Communicating with the app or with sensorio.
Connected to the network
The device is communicating
Searching for network The device is connecting to the network
Learning Dene the max. limit on your right or left
Error If this occurs, please contact BEA.
Updating
Connection to the device is impossible
Wait for update completion
At least one of the following port is not
opened : 123 (UDP) / 22 (TCP) / 443 (TCP)
Check network settings with your IT support
©BEA |
47.0206 / V3 / 04.20
BEA SA | LIEGE SCIENCE PARK | ALLÉE DES NOISETIERS 5 - 4031 ANGLEUR [BELGIUM] |T +32 4 361 65 65
| F +32 4 361 28 58 | [email protected] | WWW.BEA-SENSORS.COM
this
product
should
be
disposed
of
separately
from
unsorted
municipal
waste
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

LZR LZR®-SIGMA instrukcja

Marka
LZR
Model
LZR®-SIGMA
Typ
instrukcja
Niniejsza instrukcja jest również odpowiednia dla
Pobierz PDF
raport

w innych językach

Inne dokumenty