LG GW-B207TLQA Instrukcja obsługi

Table of contents

Entry

Important safety instruction

Identification of parts

Where to locate

Door removal

Door replacement

Height adjustment

Starting

Adjusting the temperatures and functions

Ice making

Refreshment center (Applicable to some models only)

Shelf (Applicable to some models only)

Wine holder (Applicable to some models only)

Egg box (Applicable to some models only)

Humidity control in the vegetable compartment

Convert into a vegetable or meat compartment

Deodorizer (Applicable to some models only)

Location of foods

Storing foods

How to dismantle parts

General information

Cleaning

Trouble shooting

Introduction

Installation

Operation

Suggestion on

food storage

Care and

maintenance

3

4

5

6

7

8

10

11

12

13

14

15

16

17

18

2

19

Entry

The model and serial numbers are found on the inner case or back of refrigerator

compartment of this unit. These numbers are unique to this unit and not

available to others. You should record requested information here and retain

this guide as a permanent record of your purchase. Staple your receipt here.

Date of purchase :

Dealer purchased from :

Dealer address :

Dealer phone no. :

Model no. :

Serial no. :

This refrigerator must be properly installed and located in accordance with the

installation instructions before it is used.

Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly

and pull straight out from the outlet.

When moving your appliance away from the wall, be careful not to roll over or

damage the power cord.

After your refrigerator is in operation, do not touch the cold surfaces in the freezer

compartment, particularly when hands are damp or wet. Skin may adhere to these

extremely cold surfaces.

Unplug the power cord from the power plug for cleaning or other cares. Never touch

it with wet hands because you can get an electric shock or be hurt.

Never damage, process, severely bend, pull out, or twist power cord because power

cord damage may cause a fire or electric shock. You have doubts on whether the

appliance is properly grounded.

Never place glass products in the freezer because they may be broken when their

inner matters are frozen.

The appliance is not intended for use by young children or infirm persons without

supervision.

Young childeren should be supervised to ensure that they do not play with the

appliance.

If possible, connect the refrigerator to its own individual electrical outlet to prevent it and

other appliances or household lights from causing an overload that could cause a power

outage.

The refrigerator-freezer should be so positioned that the supply plug is accessible for

quick disconnection when accident happens.

If the supply cord is damaged, it must be replaced by the manufacturer or its service

agent or a similarly qualified person in order to avoid a hazard.

Do not modify or extend the Power Cord length.



It will cause electric shock or fire.

Don’t use an

extension cord

Accessibility of

Supply Plug

Supply Cord

Replacement

Warning

Introduction

3

Important safety instruction

4

Identification of parts

DANGER : Risk of child entrapment.

Before you throw away your old refrigerator or freezer :

Take off the doors

Leave the shelves in place so that children may not easily climb inside.

The appliance is not intended for use by young children or infirm persons without

supervision.

Young children should be supervised to ensure that they do not play with the appliance.

Don’t store or use gasoline or other flammable vapor and liquids in the vicinity of this or

any other appliance.

In the event of an electric short circuit, grounding (earthing) reduces the risk of electric

shock by providing an escape wire for the electric current.

In order to prevent possible electric shock, this appliance must be grounded

improper use of the grounding plug can result in an electric shock. Consult a qualified

electrician or service person if the grounding instructions are not completely

understood, or if you have doubts on whether the appliance is properly grounded.

Child entrapment

warning

Don’t store

Grounding (Earthing)

Introduction

•

If you find some parts missing from your unit, they may be parts only used in other

models.

NOTE

Freezer

compartment

Refrigerator

compartment

Milk product corner

Door rack

Lamp

Shelf

Ice making compartment

Ice separation handle

Door rack

Ice box

Door rack

Drawer

Lower cover

Lamp

Shelf

Door rack(1 piece or 2 piece)

Refreshment center

(Optional)

Shelf

Snack corner

Shelf (Folding or Normal)

Egg box

Humidity switch

Door rack

Vegetable drawer

Wine holder (Plastic or wire)

Installation

6

Door removal

Remove the lower cover by lifting upward.

Pass the refrigerator laterally through access

door as shown in the right figure.

Remove lower

cover

Warning

Remove the

freezer

compartment

door

Remove the

refrigerator

door

Pass the

refrigerator

1) Removing the hinge cover by loosening the

screws. Separate all connection wires except

for the earth line after.

2) Remove the keeper by rotating it counter

clockwise (

)

and then lifting the upper

hinge up(

).

3) Remove the freezer compartment door by

lifting it upward.

1) Loosen the hinge cover screws and remove

the cover. Remove connection wire, if any,

except for the earth line.

2) Remove keeper by rotating it clockwise (



)

and then remove the upper hinge by lifting

it up (



).

3) Remove the refrigerator compartment door

by lifting it up.

•

When removing the upper hinge, be careful that the door does not fall forwards.

NOTE

Lower

cover

Lower hinge

Keeper

Connection

wires

Hinge

cover

Upper hinge

Keeper

Upper

hinge

Failure to do so could result in death or serious

injury.

If your access door is too narrow for the

refrigerator remove the refrigerator door and

pass the refrigerator laterally.

Electric Shock Hazard

Disconnect electrical supply to refrigerator before installing.

Installation

Level the door by inserting flat (

-

type) driver into the groove of the left height adjusting

screw and rotate it to the arrow

direction

( ).

7

Door replacement

Mount them in the reverse sequence of removal after they pass through the access door.

Level the door by inserting flat (

-

type) driver into the groove of the right height

adjusting screw and rotate it to the arrow

direction

().

The refrigerator doors will close smoothly by heightening the front side by adjusting

the height adjusting screw. If the doors do not close correctly, performance may be

affected.

Height adjustment

If the freezer

compartment door

is lower than the

refrigerator

compartment door

If the freezer

compartment door

is higher than the

refrigerator

compartment door

After leveling the

door height

2. Install accessories such as the wine corner, cover evaporating tray, etc., in their

proper places. They are packed together to prevent possible damage during shipping.

3. Connect the power supply cord (or plug) to the outlet. Don't double up with other

appliances on the same outlet.

4. Prior to use, let the appliance run for 2-3 hours. Check the flow of cold air in the

freezer compartment to ensure proper cooling has taken place. Your appliance is

now ready for use.

Operation

8

Starting

Adjusting the temperatures and functions

When your refrigerator is first installed, allow it to stabilize at normal operating

temperatures for 2-3 hours prior to filling it with fresh or frozen foods.

If operation is interrupted, wait 5 minutes before restarting.

Operation

9

You can adjust temperature of and freezer room and refrigerator room.

❇ Whenever pressing button, setting is repeated in the order of (Middle)

➔

(Middle Strong)

➔

(Strong)

➔

(Weak)

➔

(Middle Weak).



The actual inner temperature varies depending on the food status, as the

indicated setting temperature is a target temperature, not actual temperature

within refrigerator.



Refrigeration function is weak in the initial time. Please adjust temperature as

above after using refrigerator for minimum 2~3 days.

How to adjust the

temperature in

the freezer

compartment

How to adjust the

temperature in

the refrigerator

compartment

Middle(-19

0

C)

➔

Middle strong(-22

0

C)

➔

Strong(-23

0

C)

➔

Weak(-15

0

C)

➔

Middle weak(-17

0

C)

Middle(3

0

C)

➔

Middle strong(2

0

C)

➔

Strong(0

0

C)

➔

Weak(6

0

C)

➔

Middle weak(4

0

C)

Please select this function for prompt

freezer.



"On" is repeated whenever pressing

button.



The arrow mark graphic remains at the On

status when selecting Special

Refrigeration "On".



Super freezer function automatically turns

off if a fixed time passes.

Express freezer

This button stops operation of

different button.



Locking or Release is repeated whenever

pressing the .



Pressing the other button when selecting

‘LOCK’, the button does not operate.

Lock

Operation

10

Self-diagnosis function operates when a problem occurs in the unit. When an error

occurs in the unit. Immediately contact the service center without turning the

power OFF. If the power is OFF, it will take the engineer longer to find out where

the fault occurs.

The pressing of any function buttons will not alter the temperature setting when a

fault occurs.

An alarm will sound 3 times when the refrigerator door is left open for more than 1

minute. This alarm will be rung at an intervals of 30 sec. and stop at the close of the

door. If the alarm sound does not stop even after the freezer and refrigerator

compartment doors are closed, contact the service center.

Door open alarm

Self-diagnosis

(fault detection)

function

The other

functions

Door open warning



3 times of warning sounds at the interval of 30 seconds if a minute passes with the

door of refrigerator and the hombar door opened or completely closed.



Please contact with the local service center if warning continue to sound even after

closing the door.

Diagnosis (failure detection) function



Diagnosis function automatically detects failure when failure is found in product during

the use of refrigerator.



If failure occurs at product, it does not operate though pressing any button and normal

indication is not done. In this case, do not turn power off but immediately contact with

the local service center. A lot of time are need for service engineer to detect the failed

part if turning it off.



Fill water in ice making box of the ice

making corner.

If water is fully filled the ice will not be

separated well and water can be

dropped to make ice lumped.



Ice will be dropped into the ice storage

bin by rotating ice separation handle of

ice making compartment.

When making Ice

Ice Making

Ice Making Box

•

Rotating the ice separation handle before ice is fully frozen may cause the

remaining water drop into the ice storage bin to lump the ice together.

NOTE

Operation

11

Refreshment center (Applicable to some models only)

Open the refreshment center door.



You can access the refreshment center

without opening refrigerator door and thus

saving electricity.



Inner lamp is lit in refrigerator compartment

when the refreshment center door opens.

Thus it is easy to identify the contents.



Never use the refreshment center door as a

chopping board and take care not to damage

it with sharp tools.



Never rest your arms or severely press on it.



The

refreshment center

can not function

normally without the cover.



Not only can the refreshment center door

may be damaged, but also children may be

hurt.

How to use

Never place

heavy items on

the refreshment

center door or

allow children to

hang it on.

Never take out

the inner

refreshment

center cover

Use the

refreshment

center door as a

stand

Operation

1212

In case of inserting the wine holder :

Pull the wine holder downward as in



after

inserting it into the side anchoring part of the

shelf as in



by catching it upward as in



.

In case of separating the wine holder :

Pull the wine holder inward as in

➃

after

holding it upward as in

➂

by catching it.

Bottles can be stored laterally with this wine

corner.

This can be attached to any shelf.

(Type 2)

3

4

1

2

Bottles can be stored laterally with this wine

rack.

Wine holder (Applicable to some models only)

Wine holder

adjustment

(Type 1)

Shelf (

Applicable to some models only)

You can store taller items such as a gallon container or bottles by simply pushing in

front half of shelf underneath back half of shelf. Pull toward you to return to a full shelf.

Slide-Under

Shelf

Operation

13

Humidity control in the vegetable compartment

The humidity can be controlled by adjusting the humidity control switch to the

left/right when storing vegetabes or fruits.

HIGH

LOW

HIGH

L

O

W

HIGH LOW

HUMIDITY CONTROL

HIGH LOW

HUMIDITY CONTROL

High humidity

Low humidity

Convert into a vegetable or meat compartment

The

meat

compartment maintains the temperature at a lower point than the

refrigerator compartment so that meat or fish can be stored fresh longer.



The bottom drawer in the refrigerator can be converted into a vegetable or meat

compartment

•

Vegetables or fruits are frozen if the conversion switch is set to meats

compartment. So, be sure to check it before storing foods.

NOTE

Egg box (Applicable to some models only)

•

Never use the egg box as an ice storage bin. It can be broken.

•

Never store the egg box in the freezer compartment or fresh compartment.

NOTE

[Type-1] [Type-2]

You can move the egg box to wherever you want.

Deodorizer

(Applicable to some models only)

This system efficiently absorbs strong odors

by using the optical catalyst. This system

does hot have any affect on stored food.



Since it is installed already installed onto the cool air intake duct from the from

the refrigerator compartment, you need no separate installation.



Please use closed containers to store food with pungent odors.

Otherwise, this oder can be absorbed by other food in the compartment.

How to use the

deodorizing

system

14

Operation

Suggestion on food storage

Location of foods

(Refer to identification of parts)

Store wine.

Store small foods such as bread, snacks, etc..

Store various frozen foods such as meat, fish,

ice cream, frozen snacks, etc..



Store small packed frozen food.



Temperature is likely to increase as door

opens.

So, do not store long-term food

such ice cream, etc..

Wine holder

Snack

drawer

Freezer

compartment

shelf

Freezer

compartment

door rack

Freezer

compartment

drawer

Milk product

corner

Egg box

Refreshment

center

Refrigerator

compartment

shelf

Refrigerator

compartment

door rack

Vegetable drawer

Vegetable

drawer

/meat

drawer

conversion corner



Store meat, fish, chicken, etc.. after

wrapping them with thin foil.



Store dry

.

Store milk products such as butter, cheese,

etc..

Place this egg box in the proper location.

Store foods of frequent use such as beverage,

etc..

Store side dishes or other foods at a proper

distance.

Store small packed food or beverages such

as milk, juice, beer, etc..

Store vegetables or fruits.

Store vegetable, fruits, meat to thaw, raw

fish, etc.. setting the conversion switch as

necessary.

Be sure to check the conversion switch

setting before storing foods.

15

Suggestion on food storage

16

Storing foods



Store fresh food in the refrigerator compartment. How food is frozen and thawed is an

important factor in maintaining its freshness and flavor.



Do not store food which goes bad easily at low temperatures, such as bananas, and

melons.



Allow hot food to cool prior to storing, placing hot food in the refrigerator could spoil

other food, and lead to higher electric bills.



When storing the food, cover it with vinyl wrap or store in a container with a lid. This

prevents moisture from evaporating, and helps food to keep its taste and nutrients.



Do not block air vents with food. Smooth circulation of chilled air keeps refrigerator

temperatures even.



Do not open the door frequently. Opening the door lets warm air enter the refrigerator,

and cause temperatures to rise.



Never keep too many foods in door rack because they may be interrupted by inner

racks so that the door cannot be fully closed.



Do not store bottles in the freezer compartment - they may break when frozen.



Do not refreeze food that has been thawed. This causes loss of taste and nutrient.



When storing frozen food like ice cream for a long period, place it on the freezer

shelf, not in the door rack.



Do not touch the cold foods or containers- especially made of metallic -, with wet

hands and place glass products in the freezer compartment.

- That’s why you may have chilblains and they may be broken when their inner matters

are frozen, causing personal injury.



Avoid placing moist food upmost refrigerator shelves, it could freeze upon direct

contact with chilled air.



Always clean food prior to refrigeration. Vegetables and fruits should be washed and

wiped, and packed food should be wiped, to prevent adjacent food from spoiling.



When storing eggs in their storage rack or box, ensure that they are fresh, and always

store them in a up-right position, which keeps them fresh longer.

Freezer

compartment

Refrigerator

compartment

•

If you keep the refrigerator in a hot and humid place, frequent openning of the door

or storing a lot of vegetables in it may cause dew to form which has no effect on its

performance. Remove the dew with dust cloth free from care.

NOTE

How to dismantle parts

Separate the lamp by pulling it out

(

➂

)

while

slightly striking

(➀) and rotating

(

➁

)

the lamp cover.

Turn the bulb counterclockwise. Max. 40 W

bulb for

refrigerator is used and can be purchased at a

service center.

Freezer

compartment

lamp

Freezer

compartment

shelf

Door rack and

support

Lamp in

refrigerator

compartment

Vegetable

compartment

cover

To remove the lamp cover, press the protrusion

under the lamp cover to the front and then pull

the lamp cover out.

Turn the bulb counterclockwise. Max. 40 W

bulb for refrigerator is used and can be

purchased at a service center.

To remove a shelf, lift the left part of the shelf a

bit, push it to the direction , lift the right part to

the diretion , and take it out.

Lift the door rack to 

direction

holding both

sides and pull it out to  direction.



To remove the vegetable compartment cover,

pull out the vegetable compartment a bit to

the front , lift the front part of the vegetable

compartment cover as shown by , and take

it out.

•

Dismantling is done in the reverse sequence of assembly.

Be sure to unplug the power plug before dismantling and assembly.

Never apply severe force to dismantle parts. Parts may be damaged.

NOTE

17

Care and maintenance

•

Be sure to remove parts from the refrigerator door when removing the vegetable

compartment and

snack corner.

NOTE

1

2



Separate the bin () to upward.



Separate the upper rack of the refreshment

center and then pull out the refreshment

center cover

(



)

.



The refreshment center can be removed

by pulling it upwards.

Refreshment

center

2

1

18

Care and maintenance

General information

Cleaning

During average length vacations, you will probably find it best to leave the refrigerator

in operation. Place freezable items in freezer for longer life.

When you plan not to operate, remove all food, disconnect the power cord, clean the

interior thoroughly, and leave each door OPEN to prevent odor formation.

Vacation time

Power failure

If you move

Anti

condensation

pipe

Most power failures that are corrected in an hour or two will not affect your

refrigerator temperatures.

However, you should minimize the number of door openings while the power is off.

Remove or securely fasten down all loose items inside the refrigerator.

To avoid damaging the height adjusting screws, turn them all the way into the base.

The outside wall of the refrigerator cabinet may sometimes get warm, especially just

after installation.

Don’t be alarmed. This is due to the anti-condensation pipe, which pumps hot

refrigerator to prevent “sweating” on the outer cabinet wall.

Regular cleaning is recommended. Wash all compartments a baking soda solution or a

mild detergent and warm water. Rinse and dry.

Please verify that the power cord is not damaged, power plug is not overheated, or

power plug is well inserted into the power consent.

Always remove power cord from the wall outlet prior to cleaning in the vicinity of

electrical parts (lamps, switches, controls, etc.).

Wipe up excess moisture with a sponge or cloth to prevent water or liquid from

getting into any electrical part and causing an electric shock.

Never use metallic scouring pads, brushes, coarse abrasive cleaners, strong alkaline

solutions, flammable or toxic cleaning liquids on any surface.

Do not touch frozen surfaces with wet or damp hands, because damp object will stick

or adhere to extremely cold surfaces.

It is important that your refrigerator be kept clean to prevent undesirable odors. Spilled

food should be wiped up immediately, since it may acidify and stain plastic surfaces if

allowed to settle.

Use a lukewarm solution of mild soap or detergent to clean the durable finish of your

refrigerator.

Wipe with a clean damp cloth and then dry.

Exterior

Interior

After cleaning

Warning

Care and maintenance

Trouble shooting

Before calling for service, review this list. It may save you both time and expense.

This list includes common occurrences that are not the result of defective

workmanship or materials in this appliance.

Runing of

refrigerator

Refrigerator

compressor

does not run.

Refrigerator

runs too much

or too long

19

Possible cause

Refrigerator control is off.

Refrigerator is in defrost cycle.

Plug at wall outlet is disconnected.

Power outage. Check house lights.

Refrigerator is larger than the previous

one you owned.

Room or outside weather is hot.

Refrigerator has recently been

disconnected for a period of time.

Large amounts of warm or hot food

may have been stored recently.

Doors are opened too frequently or too

long.

Refrigerator or freezer door may be

slightly open.

Refrigerator control is set too cold.

Refrigerator or freezer gasket is dirty,

worn, cracked, or poorly fitted.

Thermostat is keeping the refrigerator at

a constant temperature.

Solution

Set refrigerator control. See setting the

controls.

This is normal for a fully automatic

defrosting refrigerator. The defrost

cycle occurs periodically.

Make sure plug is tightly pushed into

outlet.

Call local electric company.

This is normal. Larger, more efficient

units run longer in these conditions.

It is normal for the refrigerator to work

longer under these conditions.

It takes some hours for the refrigerator

to cool down completely.

Warm food will cause the refrigerator to

run longer until the desired temperature

is reached.

Warm air entering the refrigerator

causes it to run longer. Open the door

less often.

Make sure the refrigerator is level.

Keep food and containers from

blocking door. See problem section.

OPENING/CLOSING of doors.

Set the refrigerator control to a

warmer setting until the refrigerator

temperature is satisfactory.

Clean or change gasket. Leaks in the

door seal will cause refrigerator to run

longer in order to maintain desired

temperatures.

This is normal. Refrigerator goes on

and

off to keep the temperature constant.

Occurrence

Care and maintenance

20

Occurrence

Temperatures are

too cold

Temperature in the

freezer is too cold

and the refrigerator

temperature is

satisfactory.

Temperature in the

refrigerator

is too warm and

the freezer

temperature is

satisfactory.

Temperatures in

the freezer is too

warm.

Temperatures in

the

refrigerato or

freezer is too

warm.

Temperatures

are too warm

Meat stored in

fresh meat

drawer freezes.

Food stored in

drawers freezes.

Possible cause

Freezer control is set too cold

Doors are opened too frequently or too

long.

Door is open slightly.

Large amounts of warm of hot food

may have been stored recently.

Refrigerator has recently been

disconnected for a period of time.

Refrigerator control is set too warm.

Refrigerator control has some effect on

freezer temperature.

Freezer control is set too warm.

Refrigerator control is set too cold.

Meat should be stored at temperature

just below the freezing point of water (32˚ F,

0˚ C) for maximum fresh storage time.

Solution

Set the refrigerator control to a colder

setting.

A refrigerator requires some hours to

cool down completely.

Wait until the refrigerator or freezer

has had a chance to reach its selected

temperature.

Warm air enters the refrigerator/ freezer

whenever the door is opened.

Open the door less often.

Set the freezer control to a colder

setting until the freezer temperature is

satisfactory.

Set the freezer control to a colder

setting until the freezer temperature is

satisfactory.

It is normal for ice crystals to form due

to the moisture content of meat.

Set the refrigerator control to a

warmer setting

See above solution.

Set the freezer control to a warmer

setting until the freezer temperature is

satisfactory.

Close the door completely.

Temperature in the

refrigerator is too

cold and the

freezer

temperature

is satisfactory.

Strona jest ładowana ...

LG GW-B207TLQA Instrukcja obsługi

LG GW-B207TLQA Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty