Copyright © 2019, Fast ČR, a. s. Revision 05/2019
9
EN
8. If you want to select the keep-warm function, press the button (7), the keep-warm light will be
lighted and flashing slowly under the button. In this mode press the button „up” or „down” to set the
desired temperature. The temperature adjustment (increase and decrease) step is 5°C. The available
range of temperature setting 30–95°C. By pressing the start heating/cancel heating button you
will confirm your settings and the kettle will start heating. In order to switch off the keep-warm
function, press the keep-warm button (7) again or Start/Cancel button (10) to switch off the kettle.
Otherwise the water temperature will be maintained at a pre-set level. If no action is taken for 2
hours in the keep-warm mode, the kettle will switch off. Press the Start/Cancel button (10) again to
turn on the kettle (the kettle beeps once).
9. If you want to boil water for 1 minute, press the keep warm function button (7); the keep warm
indicator will light up under the button. In this mode, set the temperature to 100 °C by pressing
the temperature adjustment buttons (up and down). By pressing the start heating/cancel heating
button you will confirm your settings and the kettle will start heating The kettle will bring the water
to the boiling point and it will maintain this temperature for 1 minute. This way you will decrease
the amount of chlorine in water and ensure greater purity of your drink. When you want to turn
the function off, press the keep warm function button (7) again or press the start heating/cancel
heating button to turn the kettle off.
10) If you want the function that reach to the desired temperature after boiling 100°C, please press
the keep warm button(7) and hold on 3 seconds,the kettle will buzz 3 times and the light under
the keep warm button will be always bright. In this mode press the button „up” or „down” to set the
desired temperature. The temperature adjustment (increase and decrease) step is 5°C. The available
range of temperature setting is 30–95°C. By pressing the start heating/cancel heating button you
will confirm your settings and the kettle will start heating. Under this mode, the water will boil up
to 100° firstly and then drop down to the desired temperature of water, the water temperature will
be maintained at the pre-set level for 2 hours. In order to switch off the keep-warm function, press
the keep-warm button (7) again or Start/Cancel button (10) to switch off the kettle. Otherwise the
water temperature will be maintained at a pre-set level. If no action is taken for 2 hours in the keep-
warm mode, the kettle will switch off. Press the Start/Cancel button (10) again to turn on the kettle
(the kettle beeps once).
NOTE!
The kettle may be used only with the based attached. Do not open the lid when boiling water.
30-60°C – blends for babies
70°C – green and white tea
90°C – instant coffee
100°C – black tea
PART 5: CLEANING
Before your cleaning, please unplug the electrical kettle and make sure it has been cooled down.
Never immerse any part of the cable, plug, power cord base or kettle in water or any other liquid.