Dell PowerEdge M905 Skrócona instrukcja obsługi

Dell PowerEdge

M1000e, M915, M910, M905,

M805, M710HD, M710, M610x,

M610, M605, and M600

Getting Started

With Your System

Začínáme se systémem

Guide de mise en route

Erste Schritte mit dem System

Τα πρώτα βήµατα µε το σύστηµά σας

Rozpoczęcie pracy z systemem

Начало работы с системой

Procedimientos iniciales con el sistema

Sisteminizi Kullanmaya Başlarken

תכרעמה םע הדובעה תליחת

Dell PowerEdge

M1000e, M915, M910, M905,

M805, M710HD, M710, M610x,

M610, M605, and M600

Getting Started

With Your System

Model BMX01, HHB Series, FHB Series

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of

your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of data

if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage,

personal injury, or death.

____________________

Information in this publication is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, and PowerEdge™ are trademarks of Dell Inc.

Citrix™ and XenServer

®

are either registered trademarks or trademarks of Citrix Systems, Inc. and/

or one or more of its subsidiaries, and may be registered in the United States Patent and Trademark

Office and in other countries. Intel

®

is a registered trademark of Intel Corporation in the U.S. and

other countries. Microsoft

®

, Windows

®

, and Windows Server

®

are either trademarks or registered

trademarks of Microsoft Corporation in the United States and/or other countries. Red Hat

®

and Red

Hat Enterprise Linux

®

are registered trademarks of Red Hat Inc.in the United States and other

countries. SUSE

®

is a registered trademark of Novell, Inc., in the United States and other countries.

VMware

®

is a registered trademark or trademark (the "Marks") of VMware, Inc. in the United States

and/or other jurisdictions. Solaris™ is a trademark of Sun Microsystems, Inc. in the United States and

other countries.

Other trademarks and trade names may be used in this publication to refer to either the entities claiming

the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and

trade names other than its own.

Model BMX01, HHB Series, FHB Series

December 2010 P/N YCFM1 Rev. A00

Getting Started With Your System 3

Installation and Configuration

WARNING: Before performing the following procedure, review the safety

instructions that came with the system.

This section describes the steps required to set up your system for the first time.

Unpack the System

Unpack your system and identify each item.

Installing the Rails and System in a Rack

Assemble the rails and install the system in the rack following the

safety instructions and the rack installation instructions provided

with your enclosure.

4 Getting Started With Your System

Installing the Blades

Beginning at the top, slide the modules into the enclosure from left to right.

When the blade is securely installed, the handle returns to the closed position.

Connecting the CMC and KVM Modules

Connect the serial cable and network cable(s) from the management

system to the CMC module. If a second, optional CMC module is installed,

connect it as well.

Connect the keyboard, mouse, and monitor to the optional iKVM module.

Getting Started With Your System 5

Connecting the System to Power

Connect the system’s power cables to the system power supplies.

CAUTION: To prevent the power cables from being disconnected accidentally,

use the plastic clip on each power supply to secure the power cable to the

power supply, and use the Velcro strap to secure the cable to the strain-relief bar.

Plug the other end of the power cables into a power distribution unit (PDU).

CAUTION: Do not plug the power cables directly into a power outlet; you must

use a PDU. For optimal system functionality, a minimum of three power supplies

are required.

6 Getting Started With Your System

Turning On the System

Press the power button on the enclosure. The power indicator should light.

NOTE: Once you have connected the system to the power supplies, there may

be a minimal delay before you can turn on your system.

Turning On the Blades

Press the power button on each blade, or power on the blades using the

systems management software.

Getting Started With Your System 7

Complete the Operating System Setup

If you purchased a preinstalled operating system, see the operating system

documentation that ships with your system. To install an operating system

for the first time, see the installation and configuration documentation

for your operating system. Be sure the operating system is installed before

installing hardware or software not purchased with the system.

Supported Operating Systems

Operating System

M915

M910 M905 M805 M710

M710HD

M610 M610x M605

Citrix XenServer 5.5

  

Citrix XenServer 5.6

  

Microsoft Windows

Server 2008 Hyper-V

Server

 

Microsoft Windows

Essential

Business Server 2008

Standard and

Premium Editions



Microsoft Windows

HPC Server 2008

(x64)

 

Microsoft Windows

Server 2008

Standard and

Enterprise (x86)

Editions



Microsoft Windows

Web Server 2008

(x86) Edition



Microsoft Windows

Web Server 2008

(x86) Edition

with SP2



8 Getting Started With Your System

Microsoft Windows

Server 2008

Standard and

Enterprise (x86)

Editions with SP2



Microsoft Windows

Server 2008

Standard, Enterprise,

and Datacenter

(x64) Editions

 

Microsoft Windows

Web Server 2008

(x64) Edition



Microsoft Windows

Web Server 2008

(x64) Edition

with SP2

  

Microsoft Windows

Server 2008 R2

Standard, Enterprise,

and Datacenter

(x64) Editions

  

Microsoft Windows

Server 2003 Standard

and Enterprise

Editions



Microsoft Windows

Server 2003

Web Edition



Microsoft Windows

Server 2003

Standard, Enterprise,

and Web Editions

with SP1 and later



Microsoft Windows

Server 2003 R2

Standard and

Enterprise (x86)

Editions

  

Operating System

M915

M910 M905 M805 M710

M710HD

M610 M610x M605

Getting Started With Your System 9

Microsoft Windows

Server 2003

Standard and

Enterprise (x64)

Editions



Microsoft Windows

Server 2003 R2

Standard and

Enterprise (x64)

Editions

  

Microsoft Windows

Server 2003 R2

Datacenter (x64)

Edition



Microsoft Windows

Server 2003 R2

Standard, Enterprise,

and Datacenter

(x64) Editions

with SP2



Red Hat Enterprise

Linux AS, ES,

and WS (version 4.0)

Update 5 (x86)

 

Red Hat Enterprise

Linux AS, ES,

and WS (version 4.0)

Update 5 (x86_64)

 

Red Hat Enterprise

Linux

AS and

ES (version 4.7)

(x86)



Red Hat Enterprise

Linux

AS and

ES (version 4.7)

(x86_64)



Red Hat Enterprise

Linux

AS and

ES (version 4.8)

(x86)



Operating System

M915

M910 M905 M805 M710

M710HD

M610 M610x M605

10 Getting Started With Your System

Red Hat Enterprise

Linux

AS and

ES (version 4.8)

(x86_64)



Red Hat Enterprise

Linux

(version 5.0) (x86)

  

Red Hat Enterprise

Linux (version 5.0)

(x86_64)

 

Red Hat Enterprise

Linux (version 5.2)

(x86)



Red Hat Enterprise

Linux

(version 5.5)

(x86)



Red Hat Enterprise

Linux

(version 5.5)

(x86_64)



Red Hat Enterprise

Linux

(version 6.0)

(x86_64)



SUSE Linux

Enterprise Server 10

(x86_64)

 

SUSE Linux

Enterprise Server 10

(x86_64) SP3

  

SUSE Linux

Enterprise Server 11

(x86_64)

  

Solaris 10 (x86_64)







VMware ESX

version 3.0

 

VMware ESX version

3.0.2 Update 1



VMware ESX

version 3.5

 

Operating System

M915

M910 M905 M805 M710

M710HD

M610 M610x M605

Getting Started With Your System 11

NOTE: For the latest information on supported operating systems for all

PowerEdge systems, see dell.com/ossupport.

Other Information You May Need

WARNING: Before performing the following procedure, review the safety

instructions that came with the system.

• The

Configuration Guide

provides information on configuring the system

enclosure and the blades.

•

Rack Installation Instructions

included with your rack solution describes

how to install your system into a rack.

• The

Hardware Owner’s Manual

provides information about system

features and describes how to troubleshoot the system and install or

replace system components.

• Dell systems management application documentation provides

information about installing and using the systems management software.

NOTE: Always check for updates on support.dell.com/manuals and read the

updates first because they often supersede information in other documents.

VMware ESX

version 4.0 Update 1



VMware ESXi

version 4.0 Update 1



VMware ESX

version 4.0 Update 2



VMware ESXi

version 4.0 Update 2



VMware ESX

version 4.1 Update 1



VMware ESXi

version 4.1 Update 1



—Supported

Operating System

M915

M910 M905 M805 M710

M710HD

M610 M610x M605

12 Getting Started With Your System

Obtaining Technical Assistance

If you do not understand a procedure in this guide or if the system does not

perform as expected, see your Hardware Owner’s Manual. Dell offers

comprehensive hardware training and certification. See dell.com/training for

more information. This service may not be offered in all locations.

Technical Specifications

Blade Specifications

Processor

Processor type

PowerEdge M915

Two or four AMD Opteron 6000 series processors

(eight- or twelve-core processors)

PowerEdge M910

Two or four Intel Xeon

7000 series processors

(up to eight-core processors)

PowerEdge M905

Four dual- or quad-core AMD Opteron 8000 series

processors

PowerEdge M805

Two dual- or quad-core AMD Opteron 2000 series

processors

PowerEdge M710HD,

M710, M610x, M610

One or two dual-, quad-, or six-core Intel Xeon 5000

series processors

PowerEdge M605

One or two dual- or quad-core AMD Opteron 2000

series processors

PowerEdge M600

One or two dual- or quad-core Intel Xeon processors

Memory

Architecture

PowerEdge M915

1333 MHz DDR3 single-, dual-, or quad-ranked

registered LV DIMMs (RDIMMs)

PowerEdge M910

DDR3 memory modules, rated for 1066 MHz

operation

PowerEdge M905,

M805, M605

DDR2 memory modules, rated for 677 MHz

operation

Getting Started With Your System 13

PowerEdge M710HD

DDR3 and DDR3L single-, dual-, and quad-rank

memory modules, rated for1066 and 1333 MHz

PowerEdge M710,

M610x, M610,

800, 1066, or 1333 MHz DDR3 single- or dual-ranked

registered DIMMs (RDIMMs) or unbuffered DIMMs

(UDIMMs)

or

800 or 1066 MHz DDR3 quad-ranked registered

DIMMs (RDIMMs) or unbuffered DIMMs

(UDIMMs)

PowerEdge M600

FBD memory modules, rated for 677 MHz operation

Memory module sockets

PowerEdge M915, M910

32 240-pin sockets

PowerEdge M905

24 240-pin sockets

PowerEdge M805

16 240-pin sockets

PowerEdge M710HD,

M710

18 240-pin sockets

PowerEdge M610x, M610

12 240-pin sockets

PowerEdge M605, M600

Eight 240-pin sockets

Memory module capacities

PowerEdge M915

1 GB, 2 GB, 4 GB, 8 GB, and 16 GB LV DIMMs

PowerEdge M910

1 GB, 2 GB, 4 GB, 8 GB, and 16 GB RDIMMs

PowerEdge M905, M805

1 GB, 2 GB, 4 GB, and 8 GB

PowerEdge M710HD

1 GB, 2 GB, 4 GB, 8 GB, and 16 GB

RDIMMs and LV DIMMs

PowerEdge M710,

M610x, M610

2 GB, 4 GB, 8 GB, and 16 GB RDIMMs and LV DIMMs;

1 GB and 2 GB UDIMMs

PowerEdge M605, M600

512 MB, 1 GB, 2 GB, 4 GB, and 8 GB

Minimum RAM

PowerEdge M915

8 GB

PowerEdge M910

4 GB

PowerEdge M905

8 GB (Eight 1 GB memory modules)

Memory (continued)

14 Getting Started With Your System

PowerEdge M805

4 GB (Four 1 GB memory modules)

PowerEdge M710D

4 GB

PowerEdge M710,

M610x, M610

One 1 GB memory module (one-processor system) or

two 1 GB memory modules (two-processor systems)

PowerEdge M605, M600

1 GB (two 512 MB memory modules)

Maximum RAM

PowerEdge M915

512 GB

PowerEdge M910

512 GB

PowerEdge M905

192 GB

PowerEdge M805

128 GB

PowerEdge M710HD

288 GB

PowerEdge M710

288 GB (Eighteen 16 GB RDIMMs);

36 GB (Eighteen 2 GB UDIMMs)

PowerEdge M610x,

M610

192 GB (Twelve 16 GB RDIMMs);

24 GB (Twelve 2 GB UDIMMs)

PowerEdge M605, M600

64 GB

Drives

Hard Drives

PowerEdge M915, M910

Up to two 2.5-inch SAS hard drives support through

value RAID or performance RAID storage card.

or

Up to two 2.5-inch SSD hard drives support through

value RAID or performance RAID storage card.

PowerEdge M905, M805

Up to two 2.5-inch SAS hard drives support through

value RAID or performance RAID storage card.

PowerEdge M710HD

Up to two 2.5-inch SAS hard drives support through

PERC H200 embedded storage controller.

or

Up to two 2.5-inch SSD hard drives support through

PERC H200 embedded storage controller.

Memory (continued)

Getting Started With Your System 15

PowerEdge M710

Up to four 2.5-inch SAS hard drives support through

value RAID or performance RAID storage card.

PowerEdge M600,

M610x, M610

One 2.5-inch SATA hard drive support through non-

RAID, value RAID, or performance RAID

storage card.

or

Two 2.5-inch SATA hard drives support through value

RAID or performance RAID storage card.

or

One solid-state disk (SSD) hard drive support

through non-RAID storage card.

or

Up to two SAS hard drives support through value

RAID or performance RAID storage card.

PowerEdge M605

Up to two SATA hard drives support through value

RAID or performance RAID storage card.

or

Up to two solid-state disk (SSD) hard drives support

through non-RAID storage card.

or

Up to two SAS hard drives support through value

RAID or performance RAID storage card.

NOTE: For all modular systems, SAS and SATA hard

drives cannot be mixed within a blade.

NOTE: Hot-plug operation is supported if an optional

RAID controller card is installed.

Connectors

External

USB

PowerEdge M915, M910,

M905, M805, M710

Three 4-pin, USB 2.0 compliant

PowerEdge M710HD,

M610x, M610, M605,

M600

Two 4-pin, USB 2.0 compliant

Drives (continued)

16 Getting Started With Your System

Internal

Internal Secure Digital

(SD) module (PowerEdge

M915, M910, M905, M805,

M710HD, M710,

M610x, M610)

Internal Secure Digital

(SD) vFlash module

(PowerEdge M915, M910,

M710HD, M710,

M610x, M610)

One optional flash memory card slot

with the internal SD module.

One optional vFlash memory card slot for

use with the iDRAC Enterprise support.

USB key (PowerEdge M915,

M910, M710HD,

M710, M610x, M610)

One internal USB key connector.

PCIe Expansion Solution

PowerEdge M610x Supports two single-wide or one double-wide

full length standard PCIe card.

Mezzanine Cards

PowerEdge M915, M910 Up to four PCIe Gen 2 x8 mezzanine card slots,

supporting dual-port Gb Ethernet, 10 Gb Ethernet,

FC8 Fibre Channel, or Infiniband mezzanine cards.

PowerEdge M905, M805 Up to four PCIe Gen 1 x8 mezzanine card slots,

supporting dual-port Gb Ethernet, 10 Gb Ethernet,

FC8 or FC4 Fibre Channel, or 4x DDR Infiniband

mezzanine cards.

PowerEdge M710HD Up to two PCIe Gen 2 x8 mezzanine card slots,

supporting dual-port and quad-port Gb Ethernet,

10 Gb Ethernet, FC8 or FC4 Fibre Channel,

or 4x DDR Infiniband mezzanine cards.

PowerEdge M710 Up to four PCIe Gen 2 mezzanine card slots (three x8

and one x4 lane width), supporting dual-port Gb

Ethernet, 10 Gb Ethernet, FC8 or FC4 Fibre

Channel, or 4x DDR Infiniband mezzanine cards.

Connectors (continued)

Getting Started With Your System 17

PowerEdge M610x, M610 Up to two PCIe Gen 2 x8 mezzanine card slots,

supporting dual-port Gb Ethernet, 10 Gb Ethernet,

FC8 or FC4 (M610 only) Fibre Channel, or 4x DDR

Infiniband mezzanine cards.

PowerEdge M605, M600 Up to two PCIe x8 mezzanine card slots, supporting

dual-port Gb Ethernet, 10 Gb Ethernet, FC8 or

FC4 Fibre Channel, or 4x DDR Infiniband

mezzanine cards.

Embedded Ethernet Controllers

PowerEdge M915, M910,

M905, M805, M710HD,

M710

Four Ethernet ports with TOE and iSCSI boot

support, provided by two integrated dual-port

Broadcom 5709S Ethernet controllers.

PowerEdge M610x, M610 Two Ethernet ports with TOE and iSCSI boot

support, provided by one integrated dual-port

Broadcom 5709S Ethernet controller.

PowerEdge M605, M600 Two Ethernet ports with TOE and iSCSI boot

support, provided by two integrated Broadcom 5708S

controllers.

Video Controller

PowerEdge M905, M805,

M605, M600

ATI RN50 video controller. 32 MB video memory

PowerEdge M915, M910,

M710HD, M710, M610x,

M610

Matrox G200 video controller. 8 MB video memory

Physical

PowerEdge M915

Height

38.5 cm (15.2 in)

Width

5 cm (2 in)

Depth

48.6 cm (19.2 in)

Weight (maximum

configuration)

12.7 kg (28 lb)

Mezzanine Cards (continued)

18 Getting Started With Your System

PowerEdge M910

Height

38.5 cm (15.2 in)

Width

5 cm (2 in)

Depth

48.6 cm (19.2 in)

Weight (maximum

configuration)

13.1 kg (29 lb)

PowerEdge M905, M805,

M710, M610x

Height

38.5 cm (15.2 in)

Width

5 cm (2 in)

Depth

48.6 cm (19.2 in)

Weight (maximum

configuration)

11.1 kg (24.5 lb)

PowerEdge M710HD

Height

18.9 cm (7.4 in)

Width

5 cm (2 in)

Depth

48.6 cm (19.2 in)

Weight (maximum

configuration)

7.4 kg (16.3 lb)

PowerEdge M605, M600

Height

18.9 cm (7.4 in)

Width

5 cm (2 in)

Depth

48.6 cm (19.2 in)

Weight (maximum

configuration)

5.2–6.4 kg (11.5–14.0 lb)

Battery

NVRAM backup battery CR 2032 3.0-V lithium coin cell

Physical (continued)

Strona się ładuje...

Dell PowerEdge M905 Skrócona instrukcja obsługi

Dell PowerEdge M905 Skrócona instrukcja obsługi

w innych językach