Yamaha 01V96 Version 2 Instrukcja obsługi

Marka: Yamaha

Model: 01V96 Version 2

Kategoria: Miksery

Typ: Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Using 01V96 Editor

Windows

Getting Started

WindowsKeyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Special Notices

•The software and this owner’s manual are the exclu-

sive copyrights of Yamaha Corporation.

•Copying of the software or reproduction of this man-

ual in whole or in part by any means is expressly for-

bidden without the written consent of the

manufacturer.

•Copying of the commercially available music

sequence data and/or digital audio ﬁles is strictly pro-

hibited except for your personal use.

•Yamaha makes no representations or warranties with

regard to the use of the software and documentation

and cannot be held responsible for the results of the

use of this manual and the software.

•This disc is a CD-ROM. Do not attempt to play the

disc on an audio CD player. Doing so may result in

irreparable damage to your audio CD player.

•The screen displays as illustrated in this owner’s man-

ual are for instructional purposes, and may appear

somewhat different from the screens which appear on

your computer.

•Future upgrades of application and system software

and any changes in speciﬁcations and functions will

be announced separately.

•The company names and product names in this

Owner’s Manual are the trademarks or registered

trademarks of their respective companies.

Yamaha Pro Audio Global Site

http://www.yamahaproaudio.com/

Contents

Getting Started ......................................... 2

Overview of 01V96 Editor .................................... 2

Configuring 01V96 Editor .................................... 2

Synchronizing 01V96 Editor ................................ 4

Offline Edit Function ............................................ 4

Working with Sessions ......................................... 4

Undo/Redo Function ........................................... 5

Other Functions .................................................... 6

Using 01V96 Editor Windows ................... 7

Master Window .................................................... 7

Layer Windows ..................................................... 8

Selected Channel Window ................................. 14

Library Window .................................................. 21

Patch Editor Window ......................................... 23

Surround Editor Window .................................. 28

Effect Editor Window ......................................... 29

Meter Window .................................................... 31

Keyboard Shortcuts ................................ 32

Index ....................................................... 33

*Speciﬁcations and descriptions in this owner ’s manual

are for information purposes only. Yamaha Corp.

reserves the right to change or modify products or

speciﬁcations at any time without prior notice. Since

speciﬁcations, equipment or options may not be the

same in every locale, please check with your Yamaha

dealer.

Owner’s Manual

01V96 Editor

Description of menus and buttons

In the event that menu and button names on a Windows system are different from those on a Macintosh, this manual

uses the Windows menu and button names followed by the Macintosh menu and button names in parentheses.

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

Getting Started

Overview of 01V96 Editor

01V96 Editor enables you to remotely control the Yamaha 01V96 mixing console and to save the

parameter settings on your computer. To use 01V96 Editor, you must ﬁrst perform the following

operations:

Start and conﬁgure Studio Manager.

Start and conﬁgure 01V96 Editor.

Synchronize 01V96 Editor with your 01V96 console (see page 4).

For more information on using Studio Manager, refer to the Studio Manager Owner’s Manual.

Conﬁguring 01V96 Editor

You must conﬁgure the following settings for each open Editor.

❏

System Setup

To open the System Setup window, choose [System Setup] from the [File] menu.

Be sure to specify the Input port and Output port.

Input port/Output port:

From the ports you speciﬁed in Studio Manager, select the ports that

the editor will use to communicate with the 01V96 console.

Console Device ID:

01V96 Editor can control any one of up to eight 01V96 consoles, each with

its own exclusive ID. Select the ID of the console you want to control.

Note:

•Specify MIDI ports in the Setup window of Studio Manager before making the following settings.

•To open each Editor, double-click the icon of the console or device you want to edit.

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

Channel Select:

These options determine whether or not channel selection is linked. When the

PC->Console option is on, selecting a channel in 01V96 Editor selects the same channel on the

console. When the Console->PC option is on, selecting a channel on the console selects the same

channel in 01V96 Editor.

Conﬁrmation:

These options determine whether or not a conﬁrmation dialog box appears

when storing, recalling, or patching.

Layer Select:

These options determine whether or not Layer selection is linked. When the

PC->Console option is on, selecting a Layer in 01V96 Editor selects the same Layer on the console.

When the Console->PC option is on, selecting a Layer on the console selects the same Layer in

01V96 Editor.

Window Control from Console:

This option determines whether or not using the USER

DEFINED KEYS on the console enables you to remotely open and close the 01V96 Editor win-

dows.

Level Meter:

This option determines whether or not the level meters in 01V96 Editor are

enabled.

❏

Console Setup

To open the Console Setup window, choose [Console Setup] from the [File] menu.

Surround Mode:

Select a Surround mode from STEREO, 3-1, 5.1, and 6.1.

Pair Mode:

These options determine whether the fader pair is Horizontal or Vertical.

Channel Copy Parameter:

Select desired parameters to copy from channel to channel.

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

Synchronizing 01V96 Editor

When 01V96 Editor starts up, the parameter settings on the console and the parameter settings in

01V96 Editor may be different. Therefore, you must ﬁrst match the parameter settings on the con-

sole with those in 01V96 Editor. This operation is called “synchronization.” Follow the steps below

to synchronize 01V96 Editor.

Select [Synchronize], then [Total

Recall...].

The following window opens.

Select whether you want to transfer

your settings to 01V96 Editor, or vice

versa.

At this time, the All Libs option determines whether or not Scene and Library data is synchronized.

PC -> Console:

Tr ansfers the current parameter settings in 01V96 Editor to your console.

Console -> PC:

Tr ansfers the current parameter settings of your console to the 01V96 Editor.

Click [OK].

Ofﬂine Edit Function

If you do not want to synchronize your console with 01V96 Editor, select [Ofﬂine Edit] from the

[Synchronization] menu. To apply your off-line edits to your console, select [Re-Synchronize]

from the [Synchronization] with the PC->Console option to synchronize the console with 01V96

Editor.

The Ofﬂine Edit function is also activated when you click the [ONLINE]/[OFFLINE] button in the

Master window.

Working with Sessions

All of your console’s mix settings in 01V96 Editor, including Scene and library data, are called Ses-

sions. The following table describes how to handle Sessions.

Do not operate the console while synchronization is in progress.

Note:

If you use the “Total Recall” function in Studio Manager, all selected Editors in Studio Manager

are synchronized with the corresponding devices.

Note:

Some effect parameters in the console change their displayed values depending on the sampling

frequency. If you switch 01V96 Editor from OFFLINE to ONLINE, displayed parameter values may

change because 01V96 Editor loads the sampling frequency from the console and updates the display.

Creating a new Session Choose [New Session] from the [File] menu.

Opening a previously saved Session Choose [Open Session] from the [File] menu.

Saving the current Session Choose [Save Session] from the [File] menu.

Saving the current Session with a new name Choose [Save Session] As from the [File] menu.

Note:

In order to save the settings of an optional Y56K card, in a Session, you must ﬁrst resynchronize

01V96 Editor by selecting the Console->PC option.

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

If you save a Session in an Editor, only that Editor’s settings are saved in a ﬁle. The Editor’s settings

are saved in either the Studio Manager V2 format (ﬁle extension “.YSE”) or a format that is com-

patible with earlier versions of Studio Manager (ﬁle extension “.01X”). Note that earlier versions of

Studio Manager cannot open a Session saved in the “.YSE” format.

If you save a Session in the Studio Manager window, all selected Editor settings are saved in a ﬁle

with a ﬁle extension of “.YSM.”

Undo/Redo Function

In 01V96 Editor, you can cancel the latest operation (Undo) and also cancel the cancellation of the

latest operation (Redo). If you perform an Undo operation twice in a row, you can cancel the two

most-recent operations. If you perform an Undo operation three times in a row, you can cancel the

three most-recent operations. In this way, you can cancel multiple recent operations. The following

table describes how to use the Undo/Redo function.

Please note, however, that after you perform one of the following operations, you cannot success-

fully undo or redo any previous operation:

•Operations on the console

•Closing Studio Manager

•Changing Surround mode (Stereo/3-1/5.1/6.1)

•Changing Pair mode (Horizontal/vertical)

•Synchronizing the console with 01V96 Editor

•Creating a new Session

•Saving a Session

•Copying and pasting a channel

•Creating or cancelling a channel pair

•Storing or recalling a scene or library

•Turning on or off the GATE: [LINK] button in the Selected Channel window

•Turning on or off the COMPRESSOR: [LINK] button in the Selected Channel window

•Turning on or off the [LINK] button in the Surround Editor window

•Changing Aux Send mode (Fixed/variable) on the console

•Changing the sampling frequency (operated on the device)

•Changing the User Assignable Layer settings (operated on the device)

Undo Choose [Undo] from the [Edit] menu.

Redo Choose [Redo] from the [Edit] menu.

Note:

Yo u cannot Undo or Redo the following operations:

•Edits in the Setup window

•Synchronization

•Opening and closing the windows

•Resizing the windows

Note:

In the Library window, you can Undo or Redo only the most recent operation. You cannot cancel

the preceding operations.

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

Other Functions

❏

Copy & Paste Function

You can copy and paste the channel parameters.

In the Console Setup window (page 3), you can also specify the parameters to be copied.

The following table describes how to use the Copy & Paste function.

❏

Resetting to the default value (Ctrl ( ) + click)

Move the cursor to a control or a parameter value, then hold down the <Ctrl> key ( ) and click

the mouse button to reset the value to the default (e.g., to reset an Input Channel fader to –

∞

, or

reset a pan setting to Center).

❏

Ctrl( )+Shift+Click

Move the cursor to a fader or AUX Send control, then hold down the <Ctrl> key ([ ]) and

<Shift> key and click the mouse button to reset the value to the nominal level.

Copying a channel Right-click (<control>+click) a copy source channel, then choose [Copy].

Pasting a channel

Right-click (<control>+click) the copy destination channel, then choose

[Paste].

01V96 Editor—Owner’s Manual

Getting Started

Keyboard Shortcuts

Index

Windows

Using 01V96 Editor Windows

Master Window

The Master window enables you to switch between layers and control Stereo Out sig-

nals. To open this window, choose [Master] from the [Windows] menu.

[ONLINE]/[OFFLINE] button

Repeatedly clicking this button toggles between online and ofﬂine status.

This indicator is displayed when 01V96 Editor is connected to the

01V96 correctly. If the connection is correct, the 01V96 Editor

parameters will work in unison with the 01V96 parameters.

This indicator is displayed when 01V96 Editor is not connected or is

not communicating with the 01V96, or when you have selected

Ofﬂine Edit. If the connection is incomplete, the 01V96 Editor

parameters will not work in unison with the 01V96 parameters.

Meters

These meters display the output level of the

Stereo Out when Surround mode is set to

“STEREO,” or the Bus Outs used for sur-

round processing when Surround mode is

set to 3-1, 5.1 or 6.1. The meters in 3-1, 5.1

and 6.1 Surround modes are shown on the

right.

LAYER buttons

These buttons are used to select the Layers.

PAN CONTROL

These buttons are used to select either

“STEREO” (Stereo display mode) or

“SURR” (Surround display mode). The

Pan control on the Input Channels is a rotary control when “STEREO” is

selected, and a dot on a pan graph when “SURR” is selected. If Surround mode is

set to Stereo, the [SURR] button will be disabled.

Scene number display

This display indicates the currently-recalled scene’s number.

[SELECT] button

This button is used to select the Stereo Out.

[ON] button

This button turns the Stereo Out on and off. It appears orange while the Stereo

Out is on.

Master fader

This is the Stereo Out fader.

Fader value indicator

This indicator indicates the fader position in decibels (dB).

Note:

If 01V96 Editor is not connected or is not communicating with the 01V96,

clicking this button will not switch the unit from ofﬂine to online.

3-1 5.1 6.1

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

Layer Windows

The Layer window displays 16 channel strips. You can select a layer using the LAYER buttons in the

Master window. To open the Layer window, choose [Layer] from the [Windows] menu.

❏

Input Channels

Selecting the 1-16 or 17-32 button in the Master window displays the corresponding

Input Channel strips.

SOURCE parameter

This parameter is used to select an Input source. To select an Input source, click the

parameter and choose from the list that appears.

Routing buttons

These buttons are used to route the Input Channel to the Bus Outs.

[STEREO] button

This button is used to route the Input Channel’s signal to the Stereo Out.

[DIRECT] button

This button turns on and off the Input Channel’s routing to its Direct Out.

Direct Out parameter

This parameter is used to select the Direct Out destination. To select a destination,

click the parameter and choose from the list that appears.

[PHASE] button

This button is used to reverse the signal phase of the channel.

[INSERT] button

This button is used to turn on and off the Input Channel’s Insert.

[GATE] button

This button is used to turn on and off the Input Channel’s Gate.

Gate open/close indicators

These indicators display whether the Gate is open (green) or closed (red).

Gate threshold

This displays the Gate Threshold, which can be set by dragging.

[COMP] button

This button is used to turn on and off the Input Channel’s Compressor.

Compressor curve

This display shows the Compressor’s curve.

[EQ] button

This button is used to turn on and off the Input Channel’s EQ.

EQ curve

This display shows the Equalizer’s curve, which can be set by dragging.

[DELAY] button

This button is used to turn on and off the Input Channel’s Delay function.

Note:

•You can selectively turn on or off some of channel strips by using the [View] menu.

•You can open multiple Layer windows by choosing [Windows] menu -> [Layer] -> [Additional View].

The titles of these windows will indicate [Locked]. Windows that are indicated as [Locked] will not

reﬂect layer changes made on the console or in the Master window. If you want the Layer windows to

reﬂect the changes, right-click each window (Macintosh: <control> + click), then select the desired layer

using the LAYER buttons.

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

P Delay parameter

This parameter is used to set the delay time of the Delay function. Delay times can be

set by dragging.

Q Channel number

This is the channel number. Double-click the channel number to open the Selected

Channel window.

R AUX section

These controls are used to set the levels of the Aux Sends. To set an Aux

Send level, drag its bar or click a point along the length of the bar. To turn

an Aux Send on or off, click its number.

The following table shows how the Aux Send controls appear depending

on the Aux Send On/Off and Pre/Post settings. Aux Sends can be set to

pre-fader or post-fader on the Selected Channel window (see “AUX

SEND section” on page 15).

S Pan/Aux Send display

This display shows the stereo or surround pan position or, while setting an Aux Send,

the Aux Send level in dB.

T PAN control

This control is used to set the Input Channel’s stereo or surround pan position.

When the PAN CONTROL in the Master Window is set to “STEREO,” the Pan con-

trol appears as a rotary control, and when set to “SURR,” the control appears as dot

on a pan graph. The surround pan position can be set by dragging the dot.

U LFE control

When 5.1 or 6.1 Surround mode is selected, this control is used to set the

surround LFE Channel level. It appears when the PAN CONTROL in the

Master Window is set to “SURR.” To set the Channel level, drag the end of

its bar or click a point along the length of the bar.

V [SELECT] button

This button is used to select the Input Channel.

W [SOLO] button

This button solos the Input Channel. It appears orange while the channel is soloed.

X [ON] button

This button turns the Input Channel on and off. It appears orange while the channel

is on.

Y Short channel name

This is the channel’s short name. To edit the name, click it and type.

Z Channel fader and channel meter

This is the Input Channel fader. The channel meter to the right of the fader displays

the Input Channel signal level.

a Fader value indicator

The fader value indicator indicates the fader position in decibels (dB).

Aux Send status Appearance

On or off but no level set Dark blue bar

Off, pre-fader Green bar outline displays level

On, pre-fader Green bar displays level

Off, post-fader Orange bar outline displays level

On, post-fader Orange bar displays level

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

❏ Stero Input Channel

A SOURCE parameter

This parameter is used to select an Input source. To select an Input source, click the

parameter and choose from the list that appears.

B Routing buttons

These buttons are used to route the Input Channel to the Bus Outs.

C STEREO button

This button is used to route the Input Channel’s signal to the Stereo Out.

D PHASE button

This button is used to reverse the signal phase of the channel.

E EQ button

This button is used to turn on and off the Input Channel’s EQ.

F EQ curve

This display shows the Equalizer’s curve, which can be set by dragging.

G Channel number

This is the channel number. Double-clicking this will open the Selected Channel

window.

H AUX section

These controls are used to set the levels of the Aux Sends. To set an Aux

Send level, drag its bar or click a point along the length of the bar. To turn

an Aux Send on or off, click its number.

The following table shows how the Aux Send controls appear depending

on the Aux Send On/Off and Pre/Post settings. Aux Sends can be set to

pre-fader or post-fader on the Selected Channel window (see “AUX

SEND section” on page 15).

I Pan/Aux Send display

This display shows the stereo or surround pan position or, while setting an Aux Send,

the Aux Send level in dB.

J PAN control

This control is used to set the Input Channel’s stereo or surround pan position.

When the PAN CONTROL in the Master Section is set to “STEREO,” the Pan control

appears as a rotary control, and when set to “SURR,” the control appears as dot on a

pan graph. The surround pan position can be set by dragging the dot.

K LFE control

When 5.1 or 6.1 Surround mode is selected, this control is used to set the

surround LFE Channel level. It appears when the PAN CONTROL in the

Master Section is set to “SURR.” To set the LFE level, drag the end of its

bar or click a point along the length of the bar.

L SELECT button

This button switches between L and R of a stereo input channel.

Aux Send status Appearance

On or off but no level set Dark blue bar

Off, pre-fader Green bar outline displays level

On, pre-fader Green bar displays level

Off, post-fader Orange bar outline displays level

On, post-fader Orange bar displays level

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

M SOLO button

This button solos the Input Channel. It appears orange while the channel is soloed.

N ON button

This button turns the Input Channel on and off. It appears orange while the channel

is on.

O Short channel name

This is the channel’s short name. To edit the name, click it and type.

P Channel fader/Channel meter

This is the Input Channel’s fader. The meter at the right of the fader indicates the sig-

nal level.

Q Fader value

This indicates the dB value of the fader.

01V96 Editor—Owner’s Manual

Getting Started

Keyboard Shortcuts

Index

Windows

❏ Output Channels

When you select the Master LAYER button in the Master window, the Bus Out and Aux

Send channels are displayed. The Aux Send channel appears the same as the Bus Out

channels except that the Bus Out channels feature a [STEREO] button.

A [STEREO] button (Bus Out only)

This button is used to route the Bus Out to the Stereo Out.

B [INSERT] button

This button is used to turn on and off the Bus Out’s Insert.

C [COMP] button

This button is used to turn on and off the Bus Out’s Compressor.

D Compressor curve

This display shows the Compressor’s curve.

E [EQ] button

This button is used to turn on and off the Bus Out’s EQ.

F EQ curve

This display shows the Equalizer’s curve, which can be set by dragging.

G [DELAY] button

This button is used to turn on and off the Bus Out’s Delay function.

H Delay parameter

This parameter is used to set the delay time of the Delay function. Delay times can be

set by dragging.

I Channel number

This is the channel number. Double-click the channel number to open the Selected

Channel window.

J [SELECT] button

This button is used to select the Bus Out.

K [SOLO] button

This button solos the Bus Out. It appears orange while the Bus Out is soloed.

L [ON] button

This button turns the Bus Out on and off. It appears orange while the Bus Out is on.

M Short channel name

This is the channel’s short name. To edit the name, click it and type.

N Channel fader and channel meter

This is the Bus Out fader. The meter to the right of the fader displays the Bus Out sig-

nal level.

O Fader value indicator

The fader value indicator indicates the fader position in decibels (dB).

01V96 Editor—Owner’s Manual

Getting Started

Keyboard Shortcuts

Index

Windows

❏ Remote Channels

When you select the REMOTE LAYER button in the Master window, Remote Channels

are displayed.

A Channel number

This is the channel number. Double-click the channel number to open the Selected

Channel window.

B [SELECT] button

This button is used to select the Remote Channel.

C [ON] button

This button turns the Remote Channel on and off. It appears orange while the chan-

nel is on.

D Remote target name

This name indicates the remote target assigned on the 01V96.

E Channel fader

This is the Bus Out’s fader.

F Fader value indicator

This indicator indicates the fader position in the range of 0 through 127.

If the remote target is set to User Assignable Layer:

In this case, the assigned channels are displayed. For more information, refer to “Input

Channels” on page 8 and “Output Channels” on page 12. If the Group Master Fader is

assigned, only the [SOLO], and [ON] buttons and channel faders are displayed.

Note: When the remote target setting on the 01V96 is set to User Deﬁned, you can

use the [ON] buttons and channel faders to control the functions speciﬁed on the

Remote page.

Note: When the remote target setting on the 01V96 is set to User Deﬁned, you can

use the [ON] buttons and channel faders to control the functions speciﬁed on the

Remote page.

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

Selected Channel Window

The Selected Channel window allows detailed editing of the currently selected channel. To open the

Selected Channel window, choose [Selected Channel] from the [Windows] menu.

There are ﬁve variations of the layout of the Selected Channel window, as follows:

•Input Channels (see below)

•Stereo Input Channels (see page 16)

•Bus Outs (see page 17)

•Aux Sends (see page 18)

•Stereo Outs (see page 19)

❏

Input Channels

CHANNEL SELECT, INPUT PATCH & LIBRARY section

Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. To edit the name, click it and type. The INPUT PATCH parameter is used to select an input

source. To select an input, click the parameter and choose from the list that appears. The [LIBRARY]

button opens the Channel Library window.

GATE section

This section contains the Gate controls and display graph for the currently selected Input Channel.

The rotary controls are used to set the threshold, range, attack, decay, and hold. The GR meter indi-

cates the amount of gain reduction being applied by the Gate. The OUT meter indicates its output

level. The [ON] button turns the Gate on and off. The [LINK] button links the Gate of the currently

selected Input Channel with the Gate of its partner channel. The KEY IN parameter is used to select a

Gate trigger source. The [LIBRARY] button opens the Gate Library window.

Note:

Yo u can open multiple Selected Channel windows by choosing [Windows] menu ->

[Selected Channel] -> [Additional View]. The titles of these windows will indicate

[Locked]. You cannot open Library windows from windows that are indicated as [Locked].

In addition, these windows will not reﬂect the following operations:

• Channel selections made in the Layer window (via the SELECT button)

•Edits in the Surround Editor window

AB DC E F

G H I

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

C EQUALIZER section

This section contains the EQ controls and display graph for the currently selected Input Channel. The

rotary controls are used to set the gain, center frequency, and Q of each band, and the pre-EQ attenuation

level. EQ can also be set by dragging the EQ curve on the EQUALIZER graph. The [ON] button turns the

EQ on and off. The TYPE buttons select the EQ type. The [LIBRARY] button opens the Equalizer Library

window.

D DELAY & PHASE section

This section contains the delay and phase controls for the currently selected Input Channel. The rotary

controls are used to set the delay time, feedback gain, and mix balance (wet/dry balance). The [ON]

button turns the Delay on and off. The [PHASE] button reverses the channel’s signal phase.

E ROUTING, PAN & level section

This section contains the routing, pan, and level controls and the [SOLO], and [ON] buttons for the

currently selected Input Channel. ROUTING buttons 1–8 are used to route the channel to the Bus

Outs. The [STEREO] button routes the channel to the Stereo Out. The [DIRECT] button routes the

channel to its Direct Out, and the Direct Out parameter below it selects a Direct Out destination. The

[F.PAN] button turns on and off the Bus Out Follow Pan function. The PAN control is used to pan the

channel. The [SOLO] button is used to solo the channel, the [ON] button, to turn on and off the chan-

nel, and the channel fader, to set the channel level. The meter to the right of the fader indicates the

signal level, and the value indicator under the fader indicates the fader position in decibels (dB).

F AUX SEND section

This section contains the Aux Send controls for the currently selected Input Channel. Use the rotary

controls to set the Aux Send levels, and click them to turn Aux Sends on and off. Use the button below

each Aux Send control to select pre-fader or post-fader. In Fixed mode, this button is used to turn Aux

Sends on and off (the level is ﬁxed at nominal).

When Aux Sends are paired, a heart icon is displayed between them, and the odd-numbered Aux Send

control sets the level, while the even-numbered control works as a pan control.

G INSERT section

This section contains the Insert parameters for the currently selected Input Channel. The [ON] button

turns the Insert on and off. The OUT and IN parameters are used to specify the insert out destination

and insert in source respectively. The POSITION parameter is used to specify the position of the Insert

in the signal path.

H COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Input

Channel. The rotary controls are used to set the threshold, ratio, attack, release, gain, and knee. The

GR meter indicates the amount of gain reduction being applied by the Compressor. The OUT meter

indicates its output level. The [ON] button turns the Compressor on and off. The [LINK] button links

the Compressor of the currently selected Input Channel with the Compressor of its partner channel.

The POSITION parameter is used to specify the position of the Compressor in the signal path. The

ORDER parameter is used to specify the order of the Compressor and Insert when both are inserted

at the same position. The [LIBRARY] button opens the Compressor Library window.

I PAIR, FADER GROUP & MUTE GROUP section

This section contains the Pair, Fader and Mute group functions for the currently selected

Input Channel. Click the heart icon to pair and unpair the channel with its partner chan-

nel. Use the FADER GROUP buttons to add the channel to Fader groups, and use the

MUTE GROUP buttons to add it to Mute groups.

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

❏ Stereo Input Channels

A CHANNEL SELECT, INPUT PATCH & LIBRARY section

Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. To edit the name, click it and type. The INPUT PATCH parameter is used to select an input

source. To select an input, click the parameter and choose from the list that appears. The LIBRARY

button opens the Channel Library window.

B PHASE section

This section contains the phase control for the currently selected Stereo Input Channel. The PHASE

button reverses the channel’s signal phase.

C EQUALIZER section

This section contains the EQ controls and display graph for the currently selected Stereo Input Chan-

nel. The rotary controls are used to set the gain, center frequency, and Q of each band, and the pre-EQ

attenuation level. EQ can also be set by dragging the EQ curve on the EQUALIZER graph. The ON

button turns the EQ on and off. The TYPE buttons select the EQ type. The LIBRARY button opens

the Equalizer Library window.

D Routing, pan & level section

This section contains the routing, pan, and level controls and the, SOLO, and ON buttons for the cur-

rently selected Stereo Input Channel. ROUTING buttons 1–8 are used to route the channel to the Bus

Outs. The STEREO button routes the channel to the Stereo Out. The DIRECT button routes the chan-

nel to its Direct Out, and the Direct Out parameter below it selects a Direct Out destination. The

F. PAN button turns on and off the Bus Out Follow Pan function. The PAN control is used to pan the

channel. The SOLO button is used to solo the channel, the ON button, to turn on and off the channel,

and the channel fader, to set the channel level.

E AUX SEND section

This section contains the Aux Send controls for the currently selected Stereo Input Channel. Use the

rotary controls to set the Aux Send levels, and click them to turn Aux Sends on and off. Use the button

below each Aux Send control to select pre-fader or post-fader. In Fixed mode, this button is used to

turn Aux Sends on and off (the level is ﬁxed at nominal).

When Aux Sends are paired, a heart icon is displayed between them, and the odd-numbered Aux Send

control sets the level, while the even-numbered control works as a pan control.

A23 D

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

F FADER GROUP & MUTE GROUP section

This section contains the Fader and Mute group functions for the currently selected Stereo Input

Channel. Use the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE

GROUP buttons to add it to Mute groups.

❏ Bus Outs

A CHANNEL SELECT section

Channels can be selected by clicking the Channel ID and selecting from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. The [LIBRARY] button opens the Channel Library window.

B EQUALIZER section

This section contains the EQ controls and display graph for the currently selected Bus Out. It’s layout

is identical to the EQUALIZER section for Input Channels. See “EQUALIZER section” on page 15 for

more information.

C DELAY section

This section contains the delay controls for the currently selected Bus Out. The rotary control is used

to set the delay time, and the [ON] button turns the Delay function on and off.

D TO STEREO & level section

This section contains the TO STEREO, pan and level controls and the [SOLO], and [ON] buttons for

the currently selected Bus Out. The TO STEREO button routes the Bus Out to the Stereo Out, and the

rotary controls are used to set the Bus to Stereo send level and pan. The [SOLO] button is used to solo

the Bus Out, the [ON] button, to turn the Bus Out on and off, and the channel fader, to set the Bus

Out level. The meter to the right of the fader indicates the signal level, and the value indicator under

the fader indicates the fader position in dB.

E INSERT section

This section contains the Insert parameters for the currently selected Bus Out. The [ON] button turns

the Insert on and off. The OUT and IN parameters are used to select the insert out destination and

insert in source respectively. The POSITION parameter is used to specify the position of the Insert in

the signal path.

ACB D

E F G

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

F COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Bus Out.

Its layout is identical to the COMPRESSOR section for Input Channels. See “COMPRESSOR section”

on page 15 for more information.

G PAIR, FADER GROUP & MUTE GROUP section

This section contains the Pair, Fader and Mute group functions for the currently selected

Bus Out. Click the heart icon to pair and unpair the channel with its partner channel. Use

the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE

GROUP buttons to add it to Mute groups.

❏ Aux Sends

A CHANNEL SELECT section

Channels can be selected by clicking the Channel ID and choosing from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. The [LIBRARY] button opens the Channel Library window.

B EQUALIZER section

This section contains the EQ controls and display graph for the currently selected Aux Send. It’s layout

is identical to the EQUALIZER section for Input Channels. See “EQUALIZER section” on page 15 for

more information.

C DELAY section

This section contains the delay controls for the currently selected Aux Send. The rotary control is used

to set the delay time, and the [ON] button turns the Delay function on and off.

D Aux Send level section

This section contains the [SOLO], and [ON] buttons and the channel fader for the currently selected

Aux Send. The meter to the right of the fader indicates the signal level, and the value indicator under

the fader indicates the fader position in decibels (dB).

E INSERT section

This section contains the Insert parameters for the currently selected Aux Send. The [ON] button

turns the Insert on and off. The OUT and IN parameters are used to specify the insert out destination

and insert in source respectively. The POSITION parameter is used to specify the position of the Insert

in the signal path.

ACB D

E F G

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

F COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Aux Send.

Its layout is identical to the COMPRESSOR section for Input Channels. See “COMPRESSOR section”

on page 15 for more information.

G PAIR, FADER GROUP & MUTE GROUP section

This section contains the Pair, Fader and Mute group functions for the currently selected

Aux Send. Click the heart icon to pair and unpair the channel with its partner channel. Use

the FADER GROUP buttons to add the channel to Fader groups, and use the MUTE

GROUP buttons to add it to Mute groups.

❏ Stereo Out

A CHANNEL SELECT section

Channels can be selected by clicking the Channel ID and choosing from the list that appears, or by

clicking the left and right Channel Select buttons. The long channel name is displayed below the Chan-

nel ID. The [LIBRARY] button opens the Channel Library window.

B EQUALIZER section

This section contains the EQ controls and display graph for the Stereo Out. It’s layout is identical to

the EQUALIZER section for Input Channels. See “EQUALIZER section” on page 15 for more infor-

mation.

C DELAY section

This section contains the delay controls for the Stereo Out. The rotary control is used to set the delay

time, and the [ON] button turns the Delay function on and off.

D Balance & level section

This section contains the balance control, [ON], and channel fader for the Stereo Out. The meter to

the right of the fader indicates the signal level, and the value indicator under the fader indicates the

fader position in decibels (dB).

E INSERT section

This section contains the Insert parameters for the Stereo Out. The [ON] button turns the Insert on

and off. The OUT and IN parameters are used to specify the insert out destination and insert in source

respectively. The POSITION parameter is used to specify the position of the Insert in the signal path.

ACB D

E F G

Using 01V96 Editor

Windows

Getting Started

Keyboard Shortcuts

Index

01V96 Editor—Owner’s Manual

Windows

F COMPRESSOR section

This section contains the Compressor controls and display graph for the currently selected Stereo Out.

Its layout is identical to the COMPRESSOR section for Input Channels except there is no [LINK] but-

ton. See “COMPRESSOR section” on page 15 for more information.

G FADER GROUP & MUTE GROUP section

This section contains the Fader and Mute group functions for the Stereo Out. Use the FADER GROUP

buttons to add the Stereo Out to Fader groups, and use the MUTE GROUP buttons to add it to Mute

groups.

Strona się ładuje...

Yamaha 01V96 Version 2 Instrukcja obsługi

Marka: Yamaha

Model: 01V96 Version 2

Kategoria: Miksery

Typ: Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Pobierz PDF

raport

w innych językach

čeština: Yamaha 01V96 Version 2 Návod k obsluze
español: Yamaha 01V96 Version 2 El manual del propietario
italiano: Yamaha 01V96 Version 2 Manuale del proprietario
Deutsch: Yamaha 01V96 Version 2 Bedienungsanleitung
svenska: Yamaha 01V96 Version 2 Bruksanvisning
português: Yamaha 01V96 Version 2 Manual do proprietário
français: Yamaha 01V96 Version 2 Le manuel du propriétaire
Türkçe: Yamaha 01V96 Version 2 El kitabı
English: Yamaha 01V96 Version 2 Owner's manual
dansk: Yamaha 01V96 Version 2 Brugervejledning
русский: Yamaha 01V96 Version 2 Инструкция по применению
suomi: Yamaha 01V96 Version 2 Omistajan opas
Nederlands: Yamaha 01V96 Version 2 de handleiding
română: Yamaha 01V96 Version 2 Manualul proprietarului

Powiązane artykuły

Inne dokumenty

BaByliss ELECTROLISS Instrukcja obsługi