Datexx DFW-125 Instrukcja obsługi

Datexx
Marka
Datexx
Model
DFW-125
Typ
Instrukcja obsługi
DFW-125
OPERATION MANUAL
Datexx would like to express our appreciation for
your purchase by inviting you to register at
www.datexx.com to receive a free extended
warranty! Datexx registered members will also
receive exclusive access to online sales and
discounts throughout the year. We offer a wide
variety of products that are great for gifts and your
everyday life. Register Today!
Thank you
Before You Begin
Battery Installation:
Let’s Start
Programmable Countdown Time
© 2018 Teledex Inc. All rights reserved
Printed in China
Warranty
TELEDEX INC. warrants these products to the original
purchaser to be free from defective material and
workmanship. Under this warranty, the product will
be repaired or replaced at our discretion, for up to
one year without charge except for supplies or
accessories such as batteries. Please email to:
[email protected] for return authorization.
TELEDEX INC. 1 Atlas St. Kenilworth, NJ 07033
www.datexx.com
Tell Us Why You Love
TimeCube
[email protected]
facebook/datexxinc
twitter/datexxinc
instagram/datexxinc
1. Slide the battery cover
to open
2. Insert one AAA battery, + side up
3. Close the battery cover
SET
www.datexx.com
Made in China
ON
OFF
UP
DFW-125
ON
OFF
Power On:
Select Alarm Sound:
Start and Stop the Time Cube
Beep,
Beep
When the time is up
1. To start countdown,
turn the cube so that
the desired countdown
time faces up
SET
www.datexx.com
Made in China
ON
OFF
UP
DFW-125
SET
www.datexx.com
Made in China
ON
OFF
UP
DFW-125
2. To stop the alarm, turn
the cube so that the blank
top faces up
AAA 1.5V
SET
www.datexx.com
Made in China
ON
OFF
UP
DFW-125
1. Press the "UP" button twice to
enter alarm tone selection mode.
Then press the "UP" button again
once, twice, or three times to select
the type of alarm tone. Refer to the following chart
for tone selection options:
1st
2nd
Long beep
Double beep
3rd Triple beep
2. Press the “SET” button to set
SET
Set the Programmable Timer
1. Turn the control panel side
facing up
SET
www.datexx.com
Made in China
ON
OFF
UP
DFW-225
2. Press & hold “SET” button for
2 Seconds
SET
3
4. Press the “UP” button
Note:
• Press once to increase the time
5 seconds at a time
• Press and hold to fast forward
UP
5. Press the “SET” button to save programmed time
SET
6. Turn the cube so that
the blank top faces up
Start and Stop
Programmed Countdown
1. To start countdown, turn the cube
so that the control panel
side faces up
When the time is up
Beep,
Beep
2. To stop the alarm, turn the cube
so that the blank top faces up
Power Source: 1 x AAA batteries (not included)
Preset time: 1, 2, 3, 4 minutes
Programmable time: 5 seconds to 99 minutes
55 seconds
Alarm sound duration: 30 seconds
Casing material: Real Bamboo
• Do not throw the product into fire.
• Do not attempt to disassemble or alter the product.
• Do not immerse the product in water or other liquids.
• Do not use alcohol, benzene, or thinners to clean
the product.
• To clean the product, wipe with a dry, soft cloth.
• To dispose this unit, please follow the disposal
guidance of your local authorities.
Caution:
Note:
• To reset the programmed time, press both the "SET"
and "UP" buttons at the same time
• The programmed time will remain in memory
unless the time is reset or the batteries are removed
1
2
Display
Display
Display
Ultimate Time
Blocking Tool
Bamboo
  • Page 1 1

Datexx DFW-125 Instrukcja obsługi

Datexx
Marka
Datexx
Model
DFW-125
Typ
Instrukcja obsługi
ściągnij PDF
raport

w innych językach

Powiązane dokumenty

Inne dokumenty