Storm System 418D145-5 Instrukcja instalacji

Marka: Storm System

Model: 418D145-5

Typ: Instrukcja instalacji

Product Description:

Storm System Acrylic Stain w/ Enduradeck Technology is a low sheen finish designed for use on decks and other

exposed flat areas as well as vertical siding, fences and railings that are subjected to the rigors of drastic weather and

temperature conditions, abrasion, acid rain or snow. This high hiding stain provides maximum protection against water,

ultra violet rays and general atmospheric contamination. This stain resists cracking, peeling and blistering and can be

used on new wood, previously stained wood, properly pressure treated wood, and composite decking. This stain

contains a unique rust inhibitor to retard nail and screw head rusting.

Precautions:

All floor coatings are more slippery when the surface becomes wet or contaminated with debris. To help reduce the

potential for slipping, coated areas must be kept dry and properly cleaned of dirt, oils, food and beverage residue,

water, snow, ice and any other contaminants.

Architectural Specifications:

For decks and fences:

Unfinished wood - Best application

▪ 1 coat of 523XX Quick Dry Oil Primer + 1 coat of Acrylic Stain w/ Enduradeck Technology 418 Series

Acceptable Application

▪ 1 coat Acrylic Stain w/ Enduradeck Technology 418 Series thinned 10-20% with water + 1 coat of Acrylic Stain w/

Enduradeck Technology 418 Series unthinned

Previously stained decks and fences

▪ 1 or 2 coats of Acrylic Stain w/ Enduradeck Technology 418 Series

For Composite Decking

1 coat Storm System Quick Dry Oil Primer 523XX + 1 coat of Acrylic Stain w/ Enduradeck Technology

418 Series.

For siding and vertical surfaces

Unfinished wood (where extractive bleeding may occur) - Best application

▪ 1 coat of Storm System™ Quick Dry Oil Primer 523XX + 1 coat of Acrylic Stain w/ Enduradeck Technology 418 Series

Acceptable application (Where bleeding type wood is not a concern)

1 coat of Acrylic Stain w/ Enduradeck Technology 418 Series thinned with 10-20% water followed by 1 coat of Acrylic

Stain w/ Enduradeck Technology 418 Series

Previously stained wood

Application:

WARNING! If you scrape, sand or remove old paint from any surface, you may release lead dust. LEAD IS TOXIC.

EXPOSURE TO LEAD DUST CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN

CHILDREN. PREGNANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear a NIOSH-approved respirator to

control lead exposure. Carefully clean up with a wet mop or HEPA vacuum. Before you start, find out how to protect

yourself and your family by contacting the U.S. EPA/Lead Information Hotline at 1-800-424-LEAD (5323) or log on to

www.epa.gov/lead.

Surface Preparation:

Surfaces must be thoroughly clean and dry. Always test a small area before application to the entire surface. All

mildewed areas should be cleaned with Storm System All Surface Mold & Mildew Stain Remover. New pressure

treated wood should be scrubbed with Storm System All Surface Cleaner to remove all surface deposits. Rinse

thoroughly and allow to dry.

All surfaces must be free of loose wood fibers before any application.

Stir thoroughly before and during application to insure uniform appearance. Material should be intermixed by pouring

into a large container and stirring before painting large areas, to insure color uniformity. On bare wood, thin the first

coat with approximately one pint water per gallon, then apply 1 or 2 unthinned finish coats. Apply evenly with a quality

nylon or synthetic brush maintaining a wet edge. Start at the end of boards and go along surfaces to a break point to

avoid lapping. If spraying, back brush immediately. This product may also be applied by roller or pad applicator.

Clean tools and equipment immediately with warm soapy water.

New pressure treated wood must be thoroughly cleaned with Storm System All Surface Cleaner, rinsed clean and

allowed to dry completely, or allowed to weather for six months, prior to staining. Light colors may have a green cast

for a few months as the preservatives leach from the wood. Decking Stain colors vary with the different varieties of

wood. Samples should be tested on the actual wood being used before large areas of wood are stained.

Recommended Use:

Sundecks, railings and posts, fences, benches, trellis, wood walkways, open porches, wood screening, patios, garden

enclosures, outdoor furniture, siding and composite decking.

Safety Information:

Keep out of reach of children. Do not take internally. Close container after each use.

Acrylic Stain w/ Enduradeck® Technology

418 Series

4/10/2017

STORM SYSTEM™

California Paints ▪ 150 Dascomb Rd. ▪ Andover, MA ▪ 01810 ▪ www.stormsystem.com ▪ 800-225-1141

5/16/2013

Exterior

Type:

Alkyd Modified Acrylic

Specular Gloss:

Volume Solids:

38.8

@ 60°

Solids by Weight:

52.1

Dry Film Thickness:

1.9

mils

Vehicle:

73.0

Pigment:

27.0

Viscosity @ 77 °F:

Maximum VOC:

100

g/liter

Flash Pt °F:

Non-combustible

Thinner:

Water

Product Specifications:

Exposure:

Exterior

(Weight Per Gallon:

10.7

Available Package Sizes:

To Handle:

To Recoat:

hrs.

To Touch:

Drying Times:

lbs. ± .5 lb)

Surface Spread Rate:

s.f./gal.

(Spray Application is 50% of above)

Tools and Equipment:

Smooth:

325-375

Porous:

200-275

s.f./gal.

Brush -

Synthetic, Nylon or Polyester

Roller -

3/8" Nap Synthetic Fiber

Airless Spray -

.017 to .019 Tip

±2

±5

(@ 70-77 °F, 50% R.H.)

Soap & Water

Clean Up:

Available Colors and Bases:

Gallon 5 Gallon

See back page

for complete list

ITEM # COLOR NAME

41800XX White

41891XX Light Base

41892XX Medium Base

41893XX Deep Base

41895XX Clear Base

418C155 Apache Tears

418C156 Birch Beer

418C158 Chestnut Brown

418C159 Chocolate Lab

418C160 Cubano Brown

418C161 Fawn

418C162 Grizzly Bear

418C163 Melted Chocolate

418C164 Moosehead Pin

418C165 Redwood

418C166 Rich Soil

418C167 Rusty Anchor

418C168 Southwest Sangria

418C169 Spilled Wine

418C170 Steel Rod

418D145 Gray Flannel Suit

418D146 Hollywood

418D147 Horse Trot

418D148 Joe's Moss

418D149 Lake Winnipesaukee

418D150 Lodestone

418D151 Mojave Desert

418D153 Steel Sea

418D154 Zion Forest

418L103 Bedrock

418L105 Country Club White

418L108 Ghost Plant

418L109 Granite State